| 2006-06-30 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.38 |
| |
| 2005-05-09 Theodore Ts'o <tytso@mit.edu> |
| |
| * resize2fs.c (fix_resize_inode): Don't bother to translate |
| debugging printf's. |
| |
| * main.c: Fix case on usage message, and remove _() from messages |
| from a version string that doesn't need translation. |
| |
| 2005-03-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.37 |
| |
| 2006-02-05 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.36 |
| |
| 2005-01-26 Theodore Ts'o <tytso@mit.edu> |
| |
| * resize2fs.c: Fix bug where we don't release the blocks belonging |
| to the old inode table blocks when we move the inode |
| table. (Addresses Debian Bug: #290894) |
| |
| 2005-01-05 Theodore Ts'o <tytso@mit.edu> |
| |
| * main.c (main): Use parse_num_blocks() from the e2p library to |
| parse the number of blocks from the command line. |
| |
| 2004-12-16 Theodore Ts'o <tytso@mit.edu> |
| |
| * resize2fs.c (resize_fs): Call ext2fs_create_resize_inode to |
| fill in the necessary fields in the resize inode. |
| (adjust_superblock): Reserve blocks that are needed for |
| on-line resizing if that feature is enabled. |
| |
| 2004-12-14 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in: Move strip command to install-strip target. |
| Use Linux-kernel-style makefile output for "make install" |
| |
| * Makefile.in (installdirs): Use $(MKINSTALLDIRS) macro |
| |
| 2004-11-30 Theodore Ts'o <tytso@mit.edu> |
| |
| * main.c: If there is a question mark in the device name, |
| separate out the options to the IO layer, and pass it on |
| to ext2fs_open2(). |
| |
| * Makefile.in: Use Linux-kernel-style makefile output to make it |
| easier to see errors/warnings. |
| |
| 2004-09-17 Theodore Ts'o <tytso@mit.edu> |
| |
| * resize2fs.c (check_and_change_inodes): Fix debugging printf to |
| mask off the high 256 bits of dirent->name_len (which is |
| where the file type information is stored). (Addresses |
| Debian Bug #271605) |
| |
| 2004-04-03 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in: Update the modtime even if subst doesn't need to |
| update the resize2fs man page, to avoid always re-running |
| subst, especially since there are no dependencies on the |
| man page. |
| |
| 2004-02-28 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.35 |
| |
| 2003-12-07 Theodore Ts'o <tytso@mit.edu> |
| |
| * main.c, resize2fs.c: Fix gcc -Wall nitpicks. |
| |
| 2003-08-24 Theodore Ts'o <tytso@mit.edu> |
| |
| * resize2fs.8.in: Adjust description line so that apropos |
| "ext2" or "ext3" will find the man page. (Addresses |
| Debian Bug #206845) |
| |
| 2003-08-01 Philipp Thomas <pthomas@suse.de> |
| |
| * extent.c, resize2fs.c, sim_progress.c: ext2fs_getmem(), |
| ext2fs_free_mem(), and ext2fs_resize_mem() all now take a |
| 'void *' instead of a 'void **' in order to avoid pointer |
| aliasing problems with GCC 3.x. |
| |
| 2003-07-25 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.34 |
| |
| 2003-07-08 Theodore Ts'o <tytso@mit.edu> |
| |
| * main.c (main): Round the default size of the filesystem to be an |
| even multiple of the pagesize to work around a potential |
| Linux kernel bug. |
| |
| 2003-06-24 <tytso@snap.thunk.org> |
| |
| * resize2fs.c (block_mover): Don't move blocks associated with the |
| bad blocks inode. Instead, just remove them from the |
| badblocks list. (Note this means that shrinking and then |
| enlarging a filesystem is not a reversible operation; |
| information about bad blocks in the part of the filesystem |
| which is to be chopped off is discarded.) |
| |
| 2003-06-08 Theodore Ts'o <tytso@mit.edu> |
| |
| * resize2fs.8.in: Make explicit that you need to run resize2fs |
| after using fdisk to adjust the partition size when |
| expanding the filesystem. (Addresses Debian Bug #195616) |
| |
| 2003-05-13 root <tytso@mit.edu> |
| |
| * main.c (main): Add the ability to specify units to the size |
| parameter, and make the error and information messages |
| display explicitly the blocksize used by the filesystem, |
| to avoid confusion. (Addresses Debian bug: #189814) |
| |
| 2003-05-03 Theodore Ts'o <tytso@mit.edu> |
| |
| * main.c (main): Add calls to setup functions for NLS support. |
| |
| * Makefile.in: Add $(LIBINTL) to the link line so we can support |
| using the internal gettext library. |
| |
| * resize2fs.h: Add #ifndef protection around LOCALEDIR definition. |
| |
| 2003-04-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.33 |
| |
| 2003-04-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in: Use DYLD_LIBRAY_PATH so that "make check" works on |
| Darwin systems when building with shared libraries. |
| |
| 2003-03-06 <tytso@mit.edu> |
| |
| * resize2fs.c (blocks_to_move): Bug fix; we were incorrectly |
| moving the block and inode bitmaps for sparse superblock |
| filesystems. (Address Debian bug #174766) |
| |
| 2002-11-09 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.32 |
| |
| 2002-11-08 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.31 |
| |
| 2002-10-31 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.30 |
| |
| 2002-10-31 Theodore Ts'o <tytso@mit.edu> |
| |
| * resize2fs.c (inode_scan_and_fix, check_and_change_inodes): When |
| moving an inode, set the ctime field so that people using |
| dump/restore will backup the changed inode. Also update |
| the mtime and ctime of directories which get updated when |
| we need to move an inode. |
| |
| 2002-10-30 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in (install): Search all compression extensions when |
| deleting old man pages. |
| |
| * resize2fs.c (adjust_superblock, mark_table_blocks, |
| blocks_to_move): Add support for resizing filesystems that |
| use the meta block group layout. |
| |
| * main.c (main): Fixed bug that erroneously (and |
| needlessly) checked the incompat feature flag field |
| against the supported ro_compat feature set. |
| |
| 2002-10-03 Theodore Ts'o <tytso@mit.edu> |
| |
| * resize2fs.8.in: Fix typo in man page. |
| |
| 2001-09-24 Theodore Tso <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.29 |
| |
| 2001-08-31 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.28 |
| |
| 2002-08-16 Theodore Ts'o <tytso@mit.edu> |
| |
| * resize2fs.c (inode_scan_and_fix): Add code to move the extended |
| attribute block. |
| |
| 2002-07-26 Theodore Ts'o <tytso@mit.edu> |
| |
| * resize2fs.c (block_mover): If there are no blocks to move, |
| release the bmap table. This significantly speeds up |
| resize2fs when shrinking or expanding a filesystem by a |
| very small number of blocks (which EVMS will do). |
| |
| 2002-05-28 <tytso@mit.edu> |
| |
| * main.c (main): If the filesystem has errors or is not valid, |
| then require an e2fsck -f run be done on the filesystem |
| more. |
| |
| 2002-04-09 <tytso@snap.thunk.org> |
| |
| * main.c (main): If resize_fs returns an error, don't print the |
| message stating that the filesystem was resized. |
| |
| 2002-03-31 <tytso@mit.edu> |
| |
| * main.c (main): If we are resizing a plain file which is smaller |
| than the requested size, then we will attempt to |
| transparently extend the filesize in a sparse fashion by |
| writing a block at the end of the requested part of the |
| filesystem. |
| |
| * main.c (main), resize2fs.c (resize_fs), resize2fs.h: Change the |
| function prototype of resize_fs() so that it can modify |
| the new_size parameter with the actual new size of the |
| filesystem after the resize operation. (This can |
| sometimes be less than the requested new size if there |
| isn't enough space to create the necessary block group |
| metadata for that last bit of disk space.) Resize2fs now |
| prints the actual new size of the filesystem when it finishes. |
| |
| 2002-03-08 Theodore Tso <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.27 |
| |
| 2002-03-07 Theodore Tso <tytso@mit.edu> |
| |
| * resize2fs.c (process_block, inode_scan_and_fix, |
| check_and_change_inodes): Fix gcc -Wall complaints in |
| debug code. |
| |
| * Makefile.in (check): Use LD_LIBRARY_PATH to run test programs. |
| (From Philipp Thomas <pthomas@suse.de>) |
| |
| 2002-02-24 Theodore Tso <tytso@mit.edu> |
| |
| * Makefile.in (install): Remove any compressed man pages before |
| installing the man pages. |
| |
| 2002-02-03 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.26 |
| |
| 2001-09-20 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.25 |
| |
| 2001-09-02 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.24a |
| |
| 2001-08-30 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.24 |
| |
| 2001-08-15 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.23 |
| |
| 2001-06-23 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.22 |
| |
| 2001-06-15 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.21 |
| |
| 2001-06-01 Theodore Tso <tytso@valinux.com> |
| |
| * Makefile.in: Move include/asm/types.h.in to |
| lib/ext2fs/ext2_types.h.in. |
| |
| 2001-05-25 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.20 |
| |
| 2001-05-14 Theodore Tso <tytso@valinux.com> |
| |
| * resize2fs.h: Change location of ext2_fs.h to be ext2fs/ext2_fs.h |
| |
| 2001-01-11 <tytso@snap.thunk.org> |
| |
| * main.c (main): Use ext2fs_sync_device() instead of calling the |
| BLKFLSBUF ioctl directly. |
| |
| * extent.c, main.c, resize2fs.c: Change ino_t to ext2_ino_t. |
| |
| 2001-01-01 <tytso@snap.thunk.org> |
| |
| * main.c (main): Replace use of struct ext2fs_sb with struct |
| ext2_super_block. |
| |
| 2000-12-08 <tytso@snap.thunk.org> |
| |
| * Makefile.in: Fix so that top-level "make check" works correctly. |
| |
| 2000-07-13 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.19 |
| |
| 2000-07-05 <tytso@snap.thunk.org> |
| |
| * Makefile.in (install): Install resize2fs in /sbin, not /usr/sbin. |
| |
| 2000-06-12 Theodore Ts'o <tytso@valinux.com> |
| |
| * main.c, resize2fs.c, resize2fs.h, extent.c: Add NLS support. |
| |
| 2000-04-06 Theodore Ts'o <tytso@valinux.com> |
| |
| * Update copyright of files in preparation for release of |
| resize2fs. Also removed the (obsolete) beta-test check |
| that had been in the code, as well as the old spec files |
| used to package the separate distribution of resize2fs. |
| |
| * Makefile.in: No longer build resize2fs.static, since there's no |
| real point in it any more. |
| |
| 2000-04-03 Theodore Ts'o <tytso@valinux.com> |
| |
| * main.c: For platforms that don't define optarg.h, manually |
| define optarg and optind. |
| |
| 2000-02-02 Theodore Ts'o <tytso@valinux.com> |
| |
| * resize2fs.h: Remove unneeded #include of linux/fs.h |
| |
| * main.c: Fix gcc -Wall bug. main() should return an int. |
| |
| 1999-11-19 <tytso@valinux.com> |
| |
| * Makefile.in (distclean): Remove TAGS and Makefile.in.old from |
| the source directory. |
| |
| 1999-11-10 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.18 |
| |
| 1999-10-26 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.17 |
| |
| 1999-10-22 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.16 |
| |
| 1999-07-18 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.15 |
| |
| 1999-01-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.14 |
| |
| 1998-12-15 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.13 |
| |
| 1998-12-03 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in: Updated dependencies. |
| |
| 1998-09-29 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * main.c (main): Print a feedback message stating the new size of |
| the filesystem when we're through. |
| |
| 1998-09-02 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * resize2fs.c: Rename max to max_groups and max_dirs to avoid |
| possible conflicts with a cpp macro named "max". |
| |
| 1998-07-26 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * resize2fs.h: Protect include of unistd.h with HAVE_UNISTD_H. |
| |
| 1998-07-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.12 |
| |
| 1998-06-10 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * resize2fs.c (process_block): Change blkcnt_t to be e2_blkcnt_t |
| to avoid collision with LFS API. |
| |
| 1998-04-28 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * extent.c (ext2fs_create_extent_table): Use ext2fs_free_mem |
| instead of free(). |
| (extent_cmp): Use EXT2_QSORT_TYPE to define the appropriate |
| return type for comparison functions for qsort. |
| |
| 1998-04-26 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * resize2fs.c (adjust_superblock): |
| * extent.c (ext2fs_add_extent_entry): Update functions to |
| pass the old size of the memory to be resized to |
| ext2fs_resize_mem(). |
| |
| 1998-03-30 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in: Change to use new installation directory variables |
| convention. Fix uninstall rules to take $(DESTDIR) into |
| account. Remove cat8dir from the installdirs target, |
| since modern man package don't necessarily put the cat |
| directory in /usr/man/cat?. |
| |
| 1998-03-29 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * extent.c (extent_cmp): Add const to cast to prevent -Wall warning. |
| |
| * main.c (check_mount): Rename function argument to prevent -Wall |
| warning. |
| |
| 1998-03-24 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * main.c (main): Check to make sure we can really resize this |
| filesystem. If there are compatible feature sets that we |
| don't support, we need to abort. |
| |
| * resize2fs.c: Change to use the new prototype required by |
| block_iterate2 (which uses blkcnt_t for the blockcount). |
| |
| 1998-03-20 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * resize2fs.c (inode_scan_and_fix): If we are expanding the |
| filesystem, temporarily set |
| rfs->old_fs->super->s_blocks_count to ultimate size of the |
| filesystem, to avoid catching an error on the block |
| iterator. |
| |
| Mon Mar 9 12:02:47 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * main.c: Use a local version.h file. |
| |
| Sat Mar 7 18:18:04 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in: Change the name of the complete source file that we |
| built (that includes resize2fs) to be |
| e2fsprogs-ALL-<version>.tar.gz. Don't link with libuuid, |
| since it's not needed. |
| |
| * main.c (main): Add copyright notice. |
| |
| * resize2fs.c (blocks_to_move): Create the meta_bmap using the old |
| filesystem, not the new filesystem. |
| (get_new_block): Don't try checking the old block bitmap |
| if the block we're testing is beyond the boundaries of the |
| old filesystem. |
| |
| Fri Feb 27 01:02:50 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in: Add rule to build a static version of resize2fs. |
| Update dependency rules. |
| |
| * main.c: #include ../version.h, instead of using a hard-coded |
| version string. |
| |
| Tue Feb 24 15:22:52 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Change the progress function to return an errcode_t; this allows |
| the progress function to return a error indicating a |
| user-requested cancel. |
| |
| 1998-02-20 Theodore Y. Ts'o <tytso@edt.mit.edu> |
| |
| * main.c (check_mount, main): Resize2fs now checks the size of the |
| partition, and uses this as a default new_size of the |
| partition if one is not specified. Resize2fs will not let |
| you resize a mounted partition. |
| |
| * resize2fs.c: Change how the progress function for the INODE_SCAN |
| pass is performed, so that the maximum size is never zero. |
| |
| * resize2fs.8.in: Updated man page. |
| |
| Mon Feb 16 17:13:01 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * resize2fs.c, resize2fs.h, main.c, ext2_block_move.c, |
| ext2_inode_move.c: Major reoganization of how resizing |
| works. Functions in ext2_block_move.c, and |
| ext2_inode_move.c moved into resize2fs.c. Multiple passes |
| in those two files also combined into a single inode |
| scanning pass. Made the inode table moving function |
| better handling the case where it needs to abort |
| mid-operation. When moving blocks around, made the block |
| allocation function preferentially avoid the old group |
| descriptor blocks, to make resize2fs more robust. |
| |
| Fri Feb 13 17:15:43 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * resize2fs.c, resize2fs.h, ext2_block_move.c, ext2_inode_move.c, |
| main.c: Reorganize how the progress functions are called. |
| |
| Mon Jan 19 09:12:28 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * resize2fs.h: If EXT2_FLAT_INCLUDES is defined, then assume all |
| of the ext2-specific header files are in a flat directory. |
| |
| * ext2_block_move.c, ext2_inode_move.c, extent.c, resize2fs.c, |
| resize2fs.h: Rename variables named "new" to "new_block", |
| "new_inode", or "new_loc" to avoid C++ reserved word |
| clash. |
| |
| * ext2_block_move.c, ext2_inode_move.c, extent.c, resize2fs.c, |
| sim_progress.c: Use ext2fs_get_memory(), |
| ext2fs_free_memory(), et. al., instead of malloc() and |
| free(). |
| |
| * ext2_block_move.c, ext2_inode_move.c, extent.c: Explicitly cast |
| all assignments from void * to be compatible with C++. |
| |
| Mon Dec 29 19:09:45 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * banalysis.c, banalysis.h, ext2_inode_move.c, ext2_block_move.c: |
| Change private to priv_data to avoid C++ namespace clash. |
| |
| Mon Nov 3 14:45:06 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * resize2fs.h: Remove STDC magic, since everyone is STDC these days. |
| |
| * resize2fs.c, ext2_block_move.c ext2_inode_move.c: Only include |
| printf statements if RESIZE2FS_DEBUG is defined. |
| |
| * main.c: Don't read in the bitmaps since resize2fs.c does that. |
| |
| Sun Oct 19 20:40:42 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * resize2fs.h: Add #ifdef's for HAVE_SYS_TYPES_H and HAVE_SYS_TIME_H. |
| |
| Wed Sep 3 17:31:49 1997 Theodore Y. Ts'o <tytso@edt.mit.edu> |
| |
| * resize2fs.h: Add #include for errno.h |
| |
| Tue Jun 17 01:33:20 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.11 |
| |