| Thu May 8 22:22:08 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (test_disk): Pass the blocksize to the bad blocks |
| command so that all of the filesystem gets tested in the |
| case where the blocksize 2048 or 4096. |
| |
| Thu Apr 24 12:16:42 1997 Theodre Ts'o <tytso@localhost.mit.edu> |
| |
| * Release of E2fsprogs version 1.10 |
| |
| Thu Apr 24 09:52:47 1997 Theodre Ts'o <tytso@localhost.mit.edu> |
| |
| * mke2fs.c: Added new option -R, which specifies RAID options. |
| Currently the only supported RAID option is "stride" which |
| specifies the stripe width in RAID filesystem. This is |
| used to aid in the placement of the inode and block |
| bitmaps. |
| |
| * mke2fs.8.in, tune2fs.8.in: Added warnings that the sparse |
| superblock option isn't yet supported by most kernels. |
| |
| Wed Apr 23 22:42:51 1997 Theodre Ts'o <tytso@localhost.mit.edu> |
| |
| * mke2fs.c (PRS): Make the default filesystem revision be 0, not |
| 1. (Since some people are still worried about 1.2.13 |
| compatibility). |
| |
| Thu Apr 17 12:23:38 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.09 |
| |
| Fri Apr 11 18:57:24 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.1.in: Updated man page so that the 'A' attribute is |
| specified everywhere. |
| |
| * chattr.c (usage): Added usage message for the 'A' attribute. |
| |
| Fri Apr 11 18:56:26 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.08 |
| |
| Thu Apr 10 07:08:03 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * dumpe2fs.c (list_desc): List the offsets of the inode and block |
| bitmaps, and the inode table. List the block boundaries |
| for the groups. |
| |
| Sat Apr 5 11:55:52 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.c (main): Implement the -s flag allows the user to |
| set and reset the sparse superblock flag. |
| |
| * mke2fs.c (PRS): By default generate DYNAMIC revision |
| filesystems. The -s flag controls whether or not the |
| sparse superblock flag is set. |
| (PRS): Change to allow the user to specify the true |
| maximum number of blocks per group to reflect the |
| blocksize. |
| |
| Wed Mar 12 13:32:05 1997 Theodore Y. Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs version 1.07 |
| |
| Thu Mar 6 17:15:05 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (create_root_dir): Set the root directory's i_uid and |
| i_gid to be the real user and group id. |
| |
| Tue Mar 4 10:14:33 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (check_plausibility): Add more intelligent error |
| messages when the device doesn't exist. |
| |
| Sat Mar 1 10:43:32 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (main): Fix bug where the PATH environment variable isn't |
| set when it is unset. |
| |
| Tue Jan 14 12:30:45 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (write_inode_tables): Fixed bug in write_inode_tables |
| where a loop variable was getting reused in a nested loop. |
| This caused the inode table to not be correctly |
| initialized. |
| |
| Thu Jan 2 00:00:37 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * lsattr.c, chattr.c: Include string.h, since we use memcpy(). |
| |
| * findsuper.c: Use time_t for ctime(), not __u32. |
| |
| Sat Dec 28 23:39:18 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * badblocks.c: Adapted -vv modifications from Rik Faith so that |
| they frequently update the block number field. |
| |
| * badblocks.8.in: Document the optional start-block parameter |
| |
| Mon Oct 14 11:52:58 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c: Updated to use new ext2fs_allocate_tables() function. |
| |
| Tue Oct 8 02:02:03 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.06 |
| |
| Mon Oct 7 00:56:24 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.1.in: Documented the 'A' (noatime) attribute. |
| |
| * dumpe2fs.c (main): Change EXT2_SWAP to EXT2_FLAG_SWAP for |
| consistency's sake. |
| |
| Sun Sep 22 16:18:47 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.c (decode_arg): Add support for the 'A' (noatime) flag. |
| |
| Thu Sep 12 15:23:07 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.05 |
| |
| Sat Sep 7 07:34:11 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.c (main): Add support for new option -C, which sets the |
| current number of mounts. |
| (main): Allow the interval to be specified in seconds, |
| mostly for debugging. |
| |
| Tue Aug 27 17:27:43 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * Makefile.in (SMANPAGES): Use @FSCK_MAN@ instead of fsck.8. |
| (SPROGS): Use @FSCK_PROG@ instead of fsck. |
| |
| Thu Aug 22 00:51:44 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (zap_bootblock): Don't do zap_bootblock on a |
| sparc. |
| |
| Tue Aug 20 00:15:46 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * chattr.c (main): Fixed bug so that chattr -v works. (Bug report |
| and fix sent by Charles Howes, chowes@eznet.ca) |
| |
| Fri Aug 9 11:52:42 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * tune2fs.8.in: |
| * tune2fs.c: Added support for the -L option which sets the volume |
| label, the -M option which sets the last mounted |
| directory, and the -U option which sets the filesystem UUID. |
| |
| * mke2fs.8.in: |
| * mke2fs.c: Added support for the -o option, which overrides the |
| creator OS. Generate a UUID for the filesystem, if |
| applicable. Added support for the -L option which sets |
| the volume label, and the -M option which sets the last |
| mounted directory. |
| |
| Sat Jun 22 17:43:17 1996 Remy Card <card@bbj.linux.eu.org> |
| |
| * chattr.c (decode_arg): Integrated Michael Nonweiler's fix to |
| avoid a segmentation fault when the "-v" option is used |
| and no version number is specified. |
| |
| Thu May 16 11:12:30 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.04 |
| |
| Wed May 15 21:15:43 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in (fsck): fsck doesn't need to be linked with the ext2 |
| libraries. |
| |
| Wed Mar 27 00:33:40 1996 <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.03 |
| |
| Thu Mar 7 03:43:20 1996 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (PRS): Add (for development only) support to |
| specify revision and inode size of the new filesystem. |
| |
| Tue Mar 5 03:51:35 1996 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.8.in: Fix a few minor typo's in the man page. |
| |
| * mke2fs.c (reserve_inodes): Add support for dynamic first inode |
| revision. |
| |
| Mon Feb 5 22:19:49 1996 <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (check_all, PRS): Added new flag -P, which turns on the |
| parallel root option. This allows you to check the root |
| filesystem in parallel with the other filesystems. Note |
| that this is not the safest thing in the world to do, |
| since if the root filesystem is in doubt things like |
| the e2fsck executable might be corrupted! But some |
| sysadmins, who don't want to repartition the root |
| filesystem to be small and compact, may really want this |
| option turned on. |
| |
| Wed Jan 31 11:06:08 1996 <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.02 |
| |
| Tue Oct 30 21:14:12 1995 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (check_plausibility): Add check to warn user if they |
| are trying to mke2fs the whole disk. (/dev/hda |
| vs. /dev/hda1) |
| |
| Fri Dec 15 19:09:56 1995 <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (check_all): If we break out of the loop because we are |
| serializing and have just started at fsck we haven't |
| finished the pass. We need to go round again in case there |
| are more filesystems to be done in this pass. (Patch |
| submitted by Mike Jagdis) |
| |
| Sat Dec 9 10:07:16 1995 <tytso@rsts-11.mit.edu> |
| |
| * dumpe2fs.c (in_use): test_bit() was renamed to |
| ext2fs_test_bit(). |
| |
| Mon Oct 30 20:21:18 1995 <tytso@rsts-11.mit.edu> |
| |
| * fsck.c (fsck_device): Check fstype instead of type; this was a |
| stupid typo which caused coredumps in some cases. |
| |
| Thu Oct 26 12:05:18 1995 <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in (install): Strip programs when they are installed. |
| |
| Fri Aug 18 15:10:40 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * mke2fs.c (PRS): Move call of check_mount() from main() to PRS(), |
| so we do the check to see if the filesystem is mounted |
| *before* we try to determine the size of the device. |
| |
| Wed Sep 6 23:34:07 1995 Remy Card <card@bbj> |
| |
| * fsck.c (load_fs_info): Load the informations from /etc/fstab in |
| the same order. |
| |
| Thu Aug 17 22:33:09 1995 <tytso@rsts-11.mit.edu> |
| |
| * mke2fs.c (check_mount): Use the new ext2fs_check_if_mounted() |
| function to determine if the device is mounted. |
| |
| * mke2fs.c (PRS): Change call to use the new |
| ext2fs_get_device_size() function in order to determine |
| the size of the filesystem. Remove get_size() and |
| is_valid_offset(), which are no longer called. |
| |
| Fri Aug 11 08:26:24 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * fsck.c (fsck_device): Make sure fstype has been set by the user |
| and that it does not begin with "no" and the user has |
| specified exactly one type before using it as the type to |
| check. |
| |
| Fri Aug 11 14:17:18 1995 Remy Card <card@bbj> |
| |
| * badblocks.8: |
| * chattr.1: |
| * dumpe2fs.8: |
| * fsck.8: |
| * lsattr.1: |
| * mke2fs.8: |
| * mklost+found.8: |
| * tune2fs.8: Updated date and version number. |
| |
| Thu Aug 10 14:18:36 1995 Remy Card <card@bbj> |
| |
| * tune2fs.c: Fixed a bug which prevented the use of user and group |
| names with the -g and -u options. Thanks to Jean Christophe |
| ANDRE <progfou@mycrob.cafard.freenix.fr>. |
| |
| * mke2fs.8: |
| * tune2fs.8: Fixed a spelling error in Ted's name :-) |
| |
| Wed Aug 9 20:41:54 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * mke2fs.c (count_blocks): Divide the size by |
| EXT2_BLOCK_SIZE(¶m), instead of assuming that the |
| blocksize is always 1024 bytes. |
| |
| Sat Aug 5 12:00:51 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * mke2fs.c (PRS): Use malloc() instead of alloca() --- alloca() is |
| not portable!! In any case putenv() in some systems must |
| take a static character array or malloc()'ed memory; |
| passing memory allocated using alloca() to putenv() is not |
| advisable. |
| |
| * chattr.c (chattr_dir_proc): |
| * lsattr.c (lsattr_dir_proc): Use malloc() instead of alloca() --- |
| alloca is not portable! |
| |
| * fsck.c (fsck_device): If the filesystem type is specified by the |
| user using the -t option, let it override the type in |
| /etc/fstab. |
| |
| * fsck.c (strdup): Don't build strdup() if the system defines it. |
| |
| Mon Jun 12 19:15:10 1995 Theodore Y. Ts'o (tytso@dcl) |
| |
| * chattr.c, lsattr.c: Include <sys/types.h> for <dirent.h>'s |
| benefit. |
| |
| * The $(UPROGS) go in bin, not sbin. |
| |
| * badblocks.c, chattr.c, dumpe2fs.c, fsck.c, lsattr.c, mke2fs.c, |
| tune2fs.c: Don't include <getopt.h> if it doesn't exist. |
| |
| Mon Jun 12 16:36:04 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * badblocks.c, chattr.c, dumpe2fs.c, fsck.c, lsattr.c, mke2fs.c, |
| tune2fs.c: Only include getopt.h if HAVE_GETOPT_H is defined. |
| |
| Sat Jun 10 23:37:09 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * chattr.c: Include errno.h, since we use errno |
| |
| * fsck.c (load_fs_info): If HAVE_MNTENT_H is not defined, |
| explicitly initialize filesys_info to be NULL. |
| |
| * mke2fs.c: Include the stdio.h and errno.h header files |
| |
| Thu Jun 8 13:25:23 1995 Miles Bader <miles@churchy.gnu.ai.mit.edu> |
| |
| * mke2fs.c: Only include <linux/fs.h> if we can. |
| (get_size): Don't try to use the BLKGETSIZE ioctl unless it's defined. |
| (check_mount): Only check to see if the device is mounted if |
| HAVE_MNTENT_H is defined (by configure). |
| |
| * fsck.c (load_fs_info): Only try to get info about filesystems if |
| HAVE_MNTENT_H is defined (by configure). |
| (main): Allocate space for a new fsck_path instead of append to a |
| statically sized buffer. |
| (PRS): Use alloca to allocate the new path string, instead of |
| having a fixed size buffer (which was the wrong size anyway). |
| |
| * chattr.c (chattr_dir_proc): Use alloca to allocate space for a |
| filename instead of using a fixed-size buffer. |
| * lsattr.c (lsattr_dir_proc): Ditto. |
| * mklost+fond.c (main): Calculate the actual needed size for the |
| path buffer instead of using MAXPATHLEN (which not all systems have). |
| |
| * badblocks.c: Only include linux include files if we have them. |
| (flush_bufs): New function to flush a block device, optionally |
| syncing it first. This replaces other copies of this code. |
| (test_ro): Replace calls to ioctl with flush_bufs(). |
| (test_rw): Ditto. |
| |
| * Makefile.in: Rewritten to conform to GNU coding standards and |
| support separate compilation directories. |
| |
| Sat Mar 11 10:59:58 1995 Theodore Y. Ts'o <tytso@localhost> |
| |
| * mke2fs.c (main, zap_bootblock): Added new function |
| zap_bootblock() which clears the first 512 bytes of the |
| filesystem. This protects the filesystem from being |
| misidentified as a MS-DOS FAT filesystem. |
| |
| * badblocks.c (alarm_intr, test_ro, test_rw): Increase the space |
| allocated for printing the block numbers, so that the |
| display doesn't get corrupted when running badblocks on a |
| very large partition. |
| |
| * badblocks.c (do_test, test_ro, test_rw): Added missing cast to |
| ext2_loff_t, so that when checking a large device, |
| spurious seek errors aren't reported. |
| |
| * mke2fs.c (count_blocks): Declare mid to be of type ext2_loff_t |
| instead of type int, so that it works for filesystems |
| greater than 2 GB. (Fortunately count_blocks is only |
| called if the device does not support the BLKGETSIZE |
| ioctl, which most do.) |
| |
| * fsck.c (ignore): Add check to ignore filesystems with a pass |
| number of zero. (This check was accidentally deleted at |
| during 0.5b development.) |
| |
| Sat Dec 31 00:47:16 1994 <tytso@rsx-11.mit.edu> |
| |
| * mke2fs.c (new_table_block, alloc_tables, PRS, main): Add a new |
| option, -S, which only writes the superblock and group |
| descriptors. Useful for recovering when all of the |
| superblocks are corrupted somehow (as a last ditch |
| measure). |
| |
| Also, don't bother initializing the bitmap blocks in |
| alloc_tables(), since they will be overwritten at the end |
| anyway. (Should speed up mke2fs by a little.) |
| |
| Tue Dec 6 02:20:55 1994 <tytso@rsx-11.mit.edu> |
| |
| * fsck.c (main): Fix stupid typo where a null inst would be freed. |
| |
| * fsck.c (wait_one): Check WIFEXITED on status before trying to |
| extract the exit status. In other cases, return |
| FSCK_ERROR if the back end processor exited with a signal. |
| |
| Tue Nov 15 10:20:00 1994 Remy Card <card@bbj> |
| |
| * tune2fs.c (main): Fixed a bug which prevented the use of the |
| new options. |
| Added the `w' (week) suffix recognition in the check interval. |
| |
| Sun Nov 13 15:58:48 1994 (tytso@rsx-11) |
| |
| * fsck.c (load_fs_info): If the user has an obviously old |
| /etc/fstab file, issue a warning message and assume that |
| all partitions should be checked. |
| |
| Sat Nov 12 00:33:18 1994 (tytso@rsx-11) |
| |
| * dumpe2fs.c (list_desc): Update to new inode and block bitmap |
| structures. |
| |
| * mke2fs.c (create_root_dir): Create the root directory owned by |
| the effective uid. |
| |
| Mon Nov 7 22:04:37 1994 Remy Card <card@bbj> |
| |
| * tune2fs.c (main.c): Added support for new options: |
| -r reserved_blocks_count, -g reserved_gid, -u reserved_uid. |
| |
| Sun Aug 21 00:57:33 1994 Theodore Y. Ts'o (tytso@rt-11) |
| |
| * fsck.c (ignore): If the pass number is 0, ignore the filesystem. |
| |
| Wed Aug 17 21:55:03 1994 Remy Card (card@bbj) |
| |
| * badblocks.c (test_rw): Added verbose output like in the |
| read-only test. |
| |
| (do_test and test_rw): Use the llseek system call if available. |
| |
| * chattr.c: Added support for new attributes. |
| |
| * lsattr.c: Added support for long format. |
| |
| * mke2fs.c (usage): Fixed bogus usage message. |
| |
| (valid_offset): Use the llseek system call if available. |
| |
| Wed Aug 17 10:50:57 1994 Theodore Y. Ts'o (tytso@rt-11) |
| |
| * mke2fs.c (handle_bad_blocks): Check to see if a bad block is |
| where a backup superblock/group descriptor is stored. If so, |
| print a warning message and adjust the superblock counts so that |
| they are correct. (Otherwise, the bad block will get counted |
| twice and the # of free blocks count will be wrong.) |
| |
| (alloc_tables): Removed code which calcualated the free block |
| statistics, which was moved to lib/ext2fs/initialize.c. This |
| allows the bad block code to adjust the group descriptor |
| statistics if necessary. |