ethtool: Support for FEC encoding control
As FEC settings and different FEC modes are mandatory
and configurable across various interfaces of 25G/50G/100G/40G,
the lack of FEC encoding control and reporting today is a source
for interoperability issues for many vendors
set-fec/show-fec option(s) are designed to provide control and report
the FEC encoding on the link.
$ethtool --set-fec swp1 encoding [off | RS | BaseR | auto]
Encoding: Types of encoding
Off : Turning off FEC
RS : Force RS-FEC encoding
BaseR : Force BaseR encoding
Auto : Default FEC settings for drivers, and would represent
asking the hardware to essentially go into a best effort mode.
Here are a few examples of what we would expect if encoding=auto:
- if autoneg is on, we are expecting FEC to be negotiated as on or off
as long as protocol supports it
- if the hardware is capable of detecting the FEC encoding on it's
receiver it will reconfigure its encoder to match
- in absence of the above, the configuration would be set to IEEE
defaults.
>From our understanding, this is essentially what most hardware/driver
combinations are doing today in the absence of a way for users to
control the behavior.
$ethtool --show-fec swp1
FEC parameters for swp1:
FEC encodings: RS
ethtool devname output:
$ethtool swp1
Settings for swp1:
root@hpe-7712-03:~# ethtool swp18
Settings for swp18:
Supported ports: [ FIBRE ]
Supported link modes: 40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: [RS | BaseR | None | Not reported]
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: [RS | BaseR | None | Not reported]
Speed: 100000Mb/s
Duplex: Full
Port: FIBRE
PHYAD: 106
Transceiver: internal
Auto-negotiation: off
Link detected: yes
Signed-off-by: Vidya Sagar Ravipati <vidya.chowdary@gmail.com>
Signed-off-by: Dustin Byford <dustin@cumulusnetworks.com>
[code style + man page edits + commit message update]
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2 files changed