auto import from //depot/cupcake/@135843
diff --git a/makefile.in b/makefile.in
new file mode 100644
index 0000000..b125beb
--- /dev/null
+++ b/makefile.in
@@ -0,0 +1,154 @@
+#
+# @(#)Makefile 1.4 95/01/18
+#
+# ====================================================
+# Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
+#
+# Developed at SunSoft, a Sun Microsystems, Inc. business.
+# Permission to use, copy, modify, and distribute this
+# software is freely granted, provided that this notice
+# is preserved.
+# ====================================================
+#
+#
+
+#
+# There are two options in making libm at fdlibm compile time:
+# _IEEE_LIBM --- IEEE libm; smaller, and somewhat faster
+# _MULTI_LIBM --- Support multi-standard at runtime by
+# imposing wrapper functions defined in
+# fdlibm.h:
+# _IEEE_MODE -- IEEE
+# _XOPEN_MODE -- X/OPEN
+# _POSIX_MODE -- POSIX/ANSI
+# _SVID3_MODE -- SVID
+#
+# Here is how to set up CFLAGS to create the desired libm at
+# compile time:
+#
+# CFLAGS = -D_IEEE_LIBM ... IEEE libm (recommended)
+# CFLAGS = -D_SVID3_MODE ... Multi-standard supported
+# libm with SVID as the
+# default standard
+# CFLAGS = -D_XOPEN_MODE ... Multi-standard supported
+# libm with XOPEN as the
+# default standard
+# CFLAGS = -D_POSIX_MODE ... Multi-standard supported
+# libm with POSIX as the
+# default standard
+# CFLAGS = ... Multi-standard supported
+# libm with IEEE as the
+# default standard
+#
+# NOTE: if scalb's second arguement is an int, then one must
+# define _SCALB_INT in CFLAGS. The default prototype of scalb
+# is double ieee_scalb(double, double)
+#
+
+prefix = @prefix@
+
+AR = @AR@
+
+CC = @CC@
+
+#
+# Default IEEE libm
+#
+CFLAGS = @CFLAGS@ -D_IEEE_LIBM
+
+CHMOD = @CHMOD@
+
+CP = @CP@
+
+INCFILES = fdlibm.h
+
+LDFLAGS = @LDFLAGS@
+
+LIB = libfdm.a
+
+LIBS = @LIBS@
+
+RANLIB = @RANLIB@
+
+RM = @RM@ -f
+
+.INIT: $(INCFILES)
+
+.KEEP_STATE:
+
+src = k_standard.c k_rem_pio2.c \
+ k_cos.c k_sin.c k_tan.c \
+ e_acos.c e_acosh.c e_asin.c e_atan2.c \
+ e_atanh.c e_cosh.c e_exp.c e_fmod.c \
+ e_gamma.c e_gamma_r.c e_hypot.c e_j0.c \
+ e_j1.c e_jn.c e_lgamma.c e_lgamma_r.c \
+ e_log.c e_log10.c e_pow.c e_rem_pio2.c e_remainder.c \
+ e_scalb.c e_sinh.c e_sqrt.c \
+ w_acos.c w_acosh.c w_asin.c w_atan2.c \
+ w_atanh.c w_cosh.c w_exp.c w_fmod.c \
+ w_gamma.c w_gamma_r.c w_hypot.c w_j0.c \
+ w_j1.c w_jn.c w_lgamma.c w_lgamma_r.c \
+ w_log.c w_log10.c w_pow.c w_remainder.c \
+ w_scalb.c w_sinh.c w_sqrt.c \
+ s_asinh.c s_atan.c s_cbrt.c s_ceil.c s_copysign.c \
+ s_cos.c s_erf.c s_expm1.c s_fabs.c s_finite.c s_floor.c \
+ s_frexp.c s_ilogb.c s_isnan.c s_ldexp.c s_lib_version.c \
+ s_log1p.c s_logb.c s_matherr.c s_modf.c s_nextafter.c \
+ s_rint.c s_scalbn.c s_signgam.c s_significand.c s_sin.c \
+ s_tan.c s_tanh.c
+
+obj = k_standard.o k_rem_pio2.o \
+ k_cos.o k_sin.o k_tan.o \
+ e_acos.o e_acosh.o e_asin.o e_atan2.o \
+ e_atanh.o e_cosh.o e_exp.o e_fmod.o \
+ e_gamma.o e_gamma_r.o e_hypot.o e_j0.o \
+ e_j1.o e_jn.o e_lgamma.o e_lgamma_r.o \
+ e_log.o e_log10.o e_pow.o e_rem_pio2.o e_remainder.o \
+ e_scalb.o e_sinh.o e_sqrt.o \
+ w_acos.o w_acosh.o w_asin.o w_atan2.o \
+ w_atanh.o w_cosh.o w_exp.o w_fmod.o \
+ w_gamma.o w_gamma_r.o w_hypot.o w_j0.o \
+ w_j1.o w_jn.o w_lgamma.o w_lgamma_r.o \
+ w_log.o w_log10.o w_pow.o w_remainder.o \
+ w_scalb.o w_sinh.o w_sqrt.o \
+ s_asinh.o s_atan.o s_cbrt.o s_ceil.o s_copysign.o \
+ s_cos.o s_erf.o s_expm1.o s_fabs.o s_finite.o s_floor.o \
+ s_frexp.o s_ilogb.o s_isnan.o s_ldexp.o s_lib_version.o \
+ s_log1p.o s_logb.o s_matherr.o s_modf.o s_nextafter.o \
+ s_rint.o s_scalbn.o s_signgam.o s_significand.o s_sin.o \
+ s_tan.o s_tanh.o
+
+all: $(LIB)
+
+check:
+ @echo This package does not have a validation suite.
+
+clean:
+ -$(RM) *~ #* core a.out
+
+distclean: mostlyclean
+ -$(RM) $(LIB)
+ -$(RM) -r autom4te.cache/
+ -$(RM) config.cache config.log config.status Makefile
+
+install: $(LIB) uninstall
+ $(CP) $(LIB) $(prefix)/lib/$(LIB)
+ $(CHMOD) 664 $(prefix)/lib/$(LIB)
+ $(RANLIB) $(prefix)/lib/$(LIB) || true
+
+$(LIB) : $(obj)
+ $(AR) cru $(LIB) $(obj)
+ $(RANLIB) $(LIB) || true
+
+maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ -$(RM) configure
+
+mostlyclean: clean
+ -$(RM) $(obj)
+
+source: $(src) README
+
+uninstall:
+ -$(RM) $(prefix)/lib/$(LIB)