| /* |
| * Code related to writing an iolog of what a thread is doing, and to |
| * later read that back and replay |
| */ |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <libgen.h> |
| #include <assert.h> |
| #include "flist.h" |
| #include "fio.h" |
| #include "verify.h" |
| #include "trim.h" |
| |
| static const char iolog_ver2[] = "fio version 2 iolog"; |
| |
| void queue_io_piece(struct thread_data *td, struct io_piece *ipo) |
| { |
| flist_add_tail(&ipo->list, &td->io_log_list); |
| td->total_io_size += ipo->len; |
| } |
| |
| void log_io_u(struct thread_data *td, struct io_u *io_u) |
| { |
| const char *act[] = { "read", "write", "sync", "datasync", |
| "sync_file_range", "wait", "trim" }; |
| |
| assert(io_u->ddir <= 6); |
| |
| if (!td->o.write_iolog_file) |
| return; |
| |
| fprintf(td->iolog_f, "%s %s %llu %lu\n", io_u->file->file_name, |
| act[io_u->ddir], io_u->offset, |
| io_u->buflen); |
| } |
| |
| void log_file(struct thread_data *td, struct fio_file *f, |
| enum file_log_act what) |
| { |
| const char *act[] = { "add", "open", "close" }; |
| |
| assert(what < 3); |
| |
| if (!td->o.write_iolog_file) |
| return; |
| |
| |
| /* |
| * this happens on the pre-open/close done before the job starts |
| */ |
| if (!td->iolog_f) |
| return; |
| |
| fprintf(td->iolog_f, "%s %s\n", f->file_name, act[what]); |
| } |
| |
| static void iolog_delay(struct thread_data *td, unsigned long delay) |
| { |
| unsigned long usec = utime_since_now(&td->last_issue); |
| |
| if (delay < usec) |
| return; |
| |
| delay -= usec; |
| |
| /* |
| * less than 100 usec delay, just regard it as noise |
| */ |
| if (delay < 100) |
| return; |
| |
| usec_sleep(td, delay); |
| } |
| |
| static int ipo_special(struct thread_data *td, struct io_piece *ipo) |
| { |
| struct fio_file *f; |
| int ret; |
| |
| /* |
| * Not a special ipo |
| */ |
| if (ipo->ddir != DDIR_INVAL) |
| return 0; |
| |
| f = td->files[ipo->fileno]; |
| |
| switch (ipo->file_action) { |
| case FIO_LOG_OPEN_FILE: |
| ret = td_io_open_file(td, f); |
| if (!ret) |
| break; |
| td_verror(td, ret, "iolog open file"); |
| return -1; |
| case FIO_LOG_CLOSE_FILE: |
| td_io_close_file(td, f); |
| break; |
| case FIO_LOG_UNLINK_FILE: |
| unlink(f->file_name); |
| break; |
| default: |
| log_err("fio: bad file action %d\n", ipo->file_action); |
| break; |
| } |
| |
| return 1; |
| } |
| |
| int read_iolog_get(struct thread_data *td, struct io_u *io_u) |
| { |
| struct io_piece *ipo; |
| unsigned long elapsed; |
| |
| while (!flist_empty(&td->io_log_list)) { |
| int ret; |
| |
| ipo = flist_entry(td->io_log_list.next, struct io_piece, list); |
| flist_del(&ipo->list); |
| remove_trim_entry(td, ipo); |
| |
| ret = ipo_special(td, ipo); |
| if (ret < 0) { |
| free(ipo); |
| break; |
| } else if (ret > 0) { |
| free(ipo); |
| continue; |
| } |
| |
| io_u->ddir = ipo->ddir; |
| if (ipo->ddir != DDIR_WAIT) { |
| io_u->offset = ipo->offset; |
| io_u->buflen = ipo->len; |
| io_u->file = td->files[ipo->fileno]; |
| get_file(io_u->file); |
| dprint(FD_IO, "iolog: get %llu/%lu/%s\n", io_u->offset, |
| io_u->buflen, io_u->file->file_name); |
| if (ipo->delay) |
| iolog_delay(td, ipo->delay); |
| } else { |
| elapsed = mtime_since_genesis(); |
| if (ipo->delay > elapsed) |
| usec_sleep(td, (ipo->delay - elapsed) * 1000); |
| |
| } |
| |
| free(ipo); |
| |
| if (io_u->ddir != DDIR_WAIT) |
| return 0; |
| } |
| |
| td->done = 1; |
| return 1; |
| } |
| |
| void prune_io_piece_log(struct thread_data *td) |
| { |
| struct io_piece *ipo; |
| struct rb_node *n; |
| |
| while ((n = rb_first(&td->io_hist_tree)) != NULL) { |
| ipo = rb_entry(n, struct io_piece, rb_node); |
| rb_erase(n, &td->io_hist_tree); |
| remove_trim_entry(td, ipo); |
| td->io_hist_len--; |
| free(ipo); |
| } |
| |
| while (!flist_empty(&td->io_hist_list)) { |
| ipo = flist_entry(td->io_hist_list.next, struct io_piece, list); |
| flist_del(&ipo->list); |
| remove_trim_entry(td, ipo); |
| td->io_hist_len--; |
| free(ipo); |
| } |
| } |
| |
| /* |
| * log a successful write, so we can unwind the log for verify |
| */ |
| void log_io_piece(struct thread_data *td, struct io_u *io_u) |
| { |
| struct rb_node **p, *parent; |
| struct io_piece *ipo, *__ipo; |
| |
| ipo = malloc(sizeof(struct io_piece)); |
| init_ipo(ipo); |
| ipo->file = io_u->file; |
| ipo->offset = io_u->offset; |
| ipo->len = io_u->buflen; |
| |
| if (io_u_should_trim(td, io_u)) { |
| flist_add_tail(&ipo->trim_list, &td->trim_list); |
| td->trim_entries++; |
| } |
| |
| /* |
| * We don't need to sort the entries, if: |
| * |
| * Sequential writes, or |
| * Random writes that lay out the file as it goes along |
| * |
| * For both these cases, just reading back data in the order we |
| * wrote it out is the fastest. |
| * |
| * One exception is if we don't have a random map AND we are doing |
| * verifies, in that case we need to check for duplicate blocks and |
| * drop the old one, which we rely on the rb insert/lookup for |
| * handling. |
| */ |
| if ((!td_random(td) || !td->o.overwrite) && |
| (file_randommap(td, ipo->file) || td->o.verify == VERIFY_NONE)) { |
| INIT_FLIST_HEAD(&ipo->list); |
| flist_add_tail(&ipo->list, &td->io_hist_list); |
| ipo->flags |= IP_F_ONLIST; |
| td->io_hist_len++; |
| return; |
| } |
| |
| RB_CLEAR_NODE(&ipo->rb_node); |
| |
| /* |
| * Sort the entry into the verification list |
| */ |
| restart: |
| p = &td->io_hist_tree.rb_node; |
| parent = NULL; |
| while (*p) { |
| parent = *p; |
| |
| __ipo = rb_entry(parent, struct io_piece, rb_node); |
| if (ipo->file < __ipo->file) |
| p = &(*p)->rb_left; |
| else if (ipo->file > __ipo->file) |
| p = &(*p)->rb_right; |
| else if (ipo->offset < __ipo->offset) |
| p = &(*p)->rb_left; |
| else if (ipo->offset > __ipo->offset) |
| p = &(*p)->rb_right; |
| else { |
| dprint(FD_IO, "iolog: overlap %llu/%lu, %llu/%lu", |
| __ipo->offset, __ipo->len, |
| ipo->offset, ipo->len); |
| td->io_hist_len--; |
| rb_erase(parent, &td->io_hist_tree); |
| remove_trim_entry(td, __ipo); |
| free(__ipo); |
| goto restart; |
| } |
| } |
| |
| rb_link_node(&ipo->rb_node, parent, p); |
| rb_insert_color(&ipo->rb_node, &td->io_hist_tree); |
| ipo->flags |= IP_F_ONRB; |
| td->io_hist_len++; |
| } |
| |
| void write_iolog_close(struct thread_data *td) |
| { |
| fflush(td->iolog_f); |
| fclose(td->iolog_f); |
| free(td->iolog_buf); |
| td->iolog_f = NULL; |
| td->iolog_buf = NULL; |
| } |
| |
| /* |
| * Read version 2 iolog data. It is enhanced to include per-file logging, |
| * syncs, etc. |
| */ |
| static int read_iolog2(struct thread_data *td, FILE *f) |
| { |
| unsigned long long offset; |
| unsigned int bytes; |
| int reads, writes, waits, fileno = 0, file_action = 0; /* stupid gcc */ |
| char *fname, *act; |
| char *str, *p; |
| enum fio_ddir rw; |
| |
| free_release_files(td); |
| |
| /* |
| * Read in the read iolog and store it, reuse the infrastructure |
| * for doing verifications. |
| */ |
| str = malloc(4096); |
| fname = malloc(256+16); |
| act = malloc(256+16); |
| |
| reads = writes = waits = 0; |
| while ((p = fgets(str, 4096, f)) != NULL) { |
| struct io_piece *ipo; |
| int r; |
| |
| r = sscanf(p, "%256s %256s %llu %u", fname, act, &offset, |
| &bytes); |
| if (r == 4) { |
| /* |
| * Check action first |
| */ |
| if (!strcmp(act, "wait")) |
| rw = DDIR_WAIT; |
| else if (!strcmp(act, "read")) |
| rw = DDIR_READ; |
| else if (!strcmp(act, "write")) |
| rw = DDIR_WRITE; |
| else if (!strcmp(act, "sync")) |
| rw = DDIR_SYNC; |
| else if (!strcmp(act, "datasync")) |
| rw = DDIR_DATASYNC; |
| else if (!strcmp(act, "trim")) |
| rw = DDIR_TRIM; |
| else { |
| log_err("fio: bad iolog file action: %s\n", |
| act); |
| continue; |
| } |
| } else if (r == 2) { |
| rw = DDIR_INVAL; |
| if (!strcmp(act, "add")) { |
| td->o.nr_files++; |
| fileno = add_file(td, fname); |
| file_action = FIO_LOG_ADD_FILE; |
| continue; |
| } else if (!strcmp(act, "open")) { |
| fileno = get_fileno(td, fname); |
| file_action = FIO_LOG_OPEN_FILE; |
| } else if (!strcmp(act, "close")) { |
| fileno = get_fileno(td, fname); |
| file_action = FIO_LOG_CLOSE_FILE; |
| } else { |
| log_err("fio: bad iolog file action: %s\n", |
| act); |
| continue; |
| } |
| } else { |
| log_err("bad iolog2: %s", p); |
| continue; |
| } |
| |
| if (rw == DDIR_READ) |
| reads++; |
| else if (rw == DDIR_WRITE) { |
| /* |
| * Don't add a write for ro mode |
| */ |
| if (read_only) |
| continue; |
| writes++; |
| } else if (rw == DDIR_WAIT) { |
| waits++; |
| } else if (rw == DDIR_INVAL) { |
| } else if (!ddir_sync(rw)) { |
| log_err("bad ddir: %d\n", rw); |
| continue; |
| } |
| |
| /* |
| * Make note of file |
| */ |
| ipo = malloc(sizeof(*ipo)); |
| init_ipo(ipo); |
| ipo->ddir = rw; |
| if (rw == DDIR_WAIT) { |
| ipo->delay = offset; |
| } else { |
| ipo->offset = offset; |
| ipo->len = bytes; |
| if (bytes > td->o.max_bs[rw]) |
| td->o.max_bs[rw] = bytes; |
| ipo->fileno = fileno; |
| ipo->file_action = file_action; |
| } |
| |
| queue_io_piece(td, ipo); |
| } |
| |
| free(str); |
| free(act); |
| free(fname); |
| |
| if (writes && read_only) { |
| log_err("fio: <%s> skips replay of %d writes due to" |
| " read-only\n", td->o.name, writes); |
| writes = 0; |
| } |
| |
| if (!reads && !writes && !waits) |
| return 1; |
| else if (reads && !writes) |
| td->o.td_ddir = TD_DDIR_READ; |
| else if (!reads && writes) |
| td->o.td_ddir = TD_DDIR_WRITE; |
| else |
| td->o.td_ddir = TD_DDIR_RW; |
| |
| return 0; |
| } |
| |
| /* |
| * open iolog, check version, and call appropriate parser |
| */ |
| static int init_iolog_read(struct thread_data *td) |
| { |
| char buffer[256], *p; |
| FILE *f; |
| int ret; |
| |
| f = fopen(td->o.read_iolog_file, "r"); |
| if (!f) { |
| perror("fopen read iolog"); |
| return 1; |
| } |
| |
| p = fgets(buffer, sizeof(buffer), f); |
| if (!p) { |
| td_verror(td, errno, "iolog read"); |
| log_err("fio: unable to read iolog\n"); |
| fclose(f); |
| return 1; |
| } |
| |
| /* |
| * version 2 of the iolog stores a specific string as the |
| * first line, check for that |
| */ |
| if (!strncmp(iolog_ver2, buffer, strlen(iolog_ver2))) |
| ret = read_iolog2(td, f); |
| else { |
| log_err("fio: iolog version 1 is no longer supported\n"); |
| ret = 1; |
| } |
| |
| fclose(f); |
| return ret; |
| } |
| |
| /* |
| * Set up a log for storing io patterns. |
| */ |
| static int init_iolog_write(struct thread_data *td) |
| { |
| struct fio_file *ff; |
| FILE *f; |
| unsigned int i; |
| |
| f = fopen(td->o.write_iolog_file, "a"); |
| if (!f) { |
| perror("fopen write iolog"); |
| return 1; |
| } |
| |
| /* |
| * That's it for writing, setup a log buffer and we're done. |
| */ |
| td->iolog_f = f; |
| td->iolog_buf = malloc(8192); |
| setvbuf(f, td->iolog_buf, _IOFBF, 8192); |
| |
| /* |
| * write our version line |
| */ |
| if (fprintf(f, "%s\n", iolog_ver2) < 0) { |
| perror("iolog init\n"); |
| return 1; |
| } |
| |
| /* |
| * add all known files |
| */ |
| for_each_file(td, ff, i) |
| log_file(td, ff, FIO_LOG_ADD_FILE); |
| |
| return 0; |
| } |
| |
| int init_iolog(struct thread_data *td) |
| { |
| int ret = 0; |
| |
| if (td->o.read_iolog_file) { |
| /* |
| * Check if it's a blktrace file and load that if possible. |
| * Otherwise assume it's a normal log file and load that. |
| */ |
| if (is_blktrace(td->o.read_iolog_file)) |
| ret = load_blktrace(td, td->o.read_iolog_file); |
| else |
| ret = init_iolog_read(td); |
| } else if (td->o.write_iolog_file) |
| ret = init_iolog_write(td); |
| |
| return ret; |
| } |
| |
| void setup_log(struct io_log **log, unsigned long avg_msec) |
| { |
| struct io_log *l = malloc(sizeof(*l)); |
| |
| memset(l, 0, sizeof(*l)); |
| l->nr_samples = 0; |
| l->max_samples = 1024; |
| l->log = malloc(l->max_samples * sizeof(struct io_sample)); |
| l->avg_msec = avg_msec; |
| *log = l; |
| } |
| |
| void __finish_log(struct io_log *log, const char *name) |
| { |
| unsigned int i; |
| FILE *f; |
| |
| f = fopen(name, "a"); |
| if (!f) { |
| perror("fopen log"); |
| return; |
| } |
| |
| for (i = 0; i < log->nr_samples; i++) { |
| fprintf(f, "%lu, %lu, %u, %u\n", log->log[i].time, |
| log->log[i].val, |
| log->log[i].ddir, |
| log->log[i].bs); |
| } |
| |
| fclose(f); |
| free(log->log); |
| free(log); |
| } |
| |
| void finish_log_named(struct thread_data *td, struct io_log *log, |
| const char *prefix, const char *postfix) |
| { |
| char file_name[256], *p; |
| |
| snprintf(file_name, sizeof(file_name), "%s_%s.log", prefix, postfix); |
| p = basename(file_name); |
| __finish_log(log, p); |
| } |
| |
| void finish_log(struct thread_data *td, struct io_log *log, const char *name) |
| { |
| finish_log_named(td, log, td->o.name, name); |
| } |