diff --git a/Doc/documentation.html b/Doc/documentation.html
new file mode 100644
index 0000000..d3f0a50
--- /dev/null
+++ b/Doc/documentation.html
@@ -0,0 +1,181 @@
+<HTML>
+<HEAD>
+
+<TITLE>TTX/FontTools</TITLE>
+
+
+</HEAD>
+<BODY bgcolor="#FFFFFF">
+
+<H1>TTX/FontTools</H1>
+
+<A HREF="http://fonttools.sourceforge.net/">TTX/FontTools</A> is a
+suite of tools and libraries for manipulating fonts. It is written in
+Python and has a BSD-style, open-source licence -- see LICENSE.txt.
+It's hosted at <A HREF="http://sourceforge.net/">sourceforge.net</A>.
+
+<P>
+It currently reads and writes TrueType font files, reads PostScript Type 1 fonts
+and more. It contains two command line programs to convert TrueType fonts to an
+XML based format (called TTX) and back. 
+
+<H3>Scope</H3>
+
+TTX/FontTools' functionality is aimed towards font developers and font tool
+developers. It can of course be used to just access fonts (outlines,
+metrics, etc.) but it is not optimized for that. It will be further
+developed so it can be the core of any font editor. And that's exactly
+what it will be for our upcoming major rewrite of <A
+HREF="http://www.robofog.com/">RoboFog</A>, our (commercial)
+PythonPowered font editor for MacOS.
+
+<H3>Installation</H3>
+
+You need the following software to use FontTools:
+
+<UL>
+<LI>
+  <B>Python</B>. The fresh versions as well as older versions (You need 2.0 or higher) can be obtained here:
+  <A HREF="http://www.python.org/download/">http://www.python.org/download/</A>
+  or here:
+  <A HREF="http://sourceforge.net/projects/python/">http://sourceforge.net/projects/python/</A>
+  
+  <P>Windows: grab the Windows installer, run the full install.
+  <BR>Un*x: follow the build instructions.
+  <BR>MacOS: grab the installer, run "Easy Install"
+<P>
+<LI>
+  The <B>Numeric Python</B> extension (you don't need this under MacOS, since 	it's
+  included in the MacPython installer). Get a fresh version from the download page,
+  linked from here:
+    <A HREF="http://sourceforge.net/projects/numpy/">http://sourceforge.net/projects/numpy/</A>
+  <P>Windows: grab the "Numeric-*.exe" archive, it's an installer. Make sure the
+  Python version in the archive name (eg. "2.1") matches the Python version you have.
+  <BR>Linux/Un*x: get a source archive and run this command from the unpacked directory:
+  <BR><TT>python setup.py install</TT>
+<P>
+<LI>
+  <B>PyXML</B>, a set of XML tools:
+    <A HREF="http://sourceforge.net/projects/pyxml/">http://sourceforge.net/projects/pyxml/</A>
+  <BR>Installation should be very similar to installing Numeric Python, see above.
+  <BR><I>Note:</I> some Python distributions already contain the neccesary XML support.
+  If "import xml.parsers.expat" works at the Python interactive prompt, you don't need to
+  install PyXML.
+  
+</UL>
+
+
+Now run the "setup.py" script from the FontTools archive. This will install
+all the modules in the right places, as well as tries to compile the one (optional)
+C extension contained in FontTools. (XXX: need precompiled Mac and Windows binaries,
+*or* a way to skip compilation when there's no compiler available.)
+
+<P>Additional Mac instructions:
+De-binhex "TTX.rsrc.hqx" by dropping it onto StuffIt expander. (Or use your
+own preferred method)
+The "TTX.py" script included in this archive is the Mac-only main program: 
+Drop it onto the "BuildApplet" app inside the Python folder; this will 
+produce the TTX applet.
+
+
+<H3>User documentation</H3>
+
+<P>For Unix and DOS there are three command line programs:
+<UL>
+	<LI>ttdump -- dumps a TrueType (or OpenType) font file to TTX format.
+	<LI>ttcompile -- compiles a TTX file back into a TTF (or OTF) file.
+	<LI>ttlist -- lists minimal info about each table in a font.
+</UL>
+They can all work with multiple input files. There are some extra
+options which are explained by the 'usage' text; use the -h option to
+display  it. The setup.py script installs them as global tools, the
+source is in the Tools directory.
+
+<P>For MacOS there's a application called TTX. If you drop a TrueType
+file onto it, it will convert it to XML. If you drop an XML file onto
+it, it will convert it back to TrueType. Please read the additional
+README file in the Mac subdirectory, since it behaves quite differently
+than the command line programs described below.
+
+<P>Adam Twardoch contributed a Windows registry script (ttx_shellext_win32.py) which
+makes the two above tools available under the Right Mouse Button. I haven't tested 
+these myself, but I'm very interested in hearing about the results!
+
+<H3>A note about glyph names and TrueType GlyphID's</H3>
+
+TrueType fonts use glyph indices (GlyphID's) to refer to glyphs in most places.
+While this is fine in binary form, it is really hard to work with for
+humans. Therefore we use names instead.
+
+<P>The glyph names are either extracted from the 'CFF ' table or the 'post' table,
+or are derived from a Unicode 'cmap' table. In the latter case the Adobe Glyph List
+is used to calculate names based on Unicode values. If all of these mthods fail,
+names are invented based on GlyphID (eg. "glyph00142").
+
+<P>It is possible that different glyphs use the same name. If this happens,
+we force the names to be unique by appending "#n" to the name (n being an
+integer number). The original names are being kept, so this has no influence
+on a "round tripped" font.
+
+<P>Because the order in which glyphs are stored inside the TT font is
+important, we maintain an ordered list of glyph names in the font.
+
+<H3>Feedback</H3>
+
+Please join the fonttools-discussion mailing list at SourceForge. Subscription
+info can be found if you follow the "Mailing Lists" link at the
+<A HREF="http://sourceforge.net/projects/fonttools/">SourceForge project page</A>.
+You can also email me directly at <A HREF="mailto:just@letterror.com">just@letterror.com</A>.
+
+<P>
+If you want to follow the development of FontTools closely, or would like to
+contribute, you can also subscribe to the fonttools-checkins mailing list.
+
+<H3>Anonymous CVS-access</H3>
+
+The FontTools sources are also accessible through CVS, see the
+the <A HREF="http://sourceforge.net/projects/fonttools/">SourceForge project
+page</A>. Let me know if you'd like to become a co-developer.
+
+<H3>Developer documentation</H3>
+
+Sorry, documentation beyond doc strings in the source code is still on my to-do list... 
+Below follows a brief overview of what's there.
+
+<P>
+<H3>The library</H3>
+
+Cross-platform
+<UL>
+	<LI>fontTools.t1Lib -- Provides a Type 1 font reader. Writing is a planned feature.
+	<LI>fontTools.ttLib -- Extensive TrueType tools. Reads and writes. This is the flagship 
+	    of FontTools, it's by far the most mature component. Contains a completely modular
+	    TTF table converter architecture. See ttLib/tables/table_API_readme.txt.
+	<LI>fontTools.afmLib -- And AFM file reader/writer.
+	<LI>fontTools.cffLib -- Reads CFF fonts. Writing is a planned feature.
+	<LI>fontTools.unicode -- A simple (but large) module that translates 
+	    Unicode values to their descriptive names. Still Unicode 2.0.
+	<LI>fontTools.agl -- Interface to the Adobe Glyph List: maps unicode values
+	    to glyph names and back.
+</UL>
+
+Mac-specific
+<UL>
+	<LI>fontTools.fondLib -- A reader/writer class for Mac FOND resources.
+	<LI>fontTools.nfntLib -- Reads Mac NFNT bitmap font resources.
+</UL>
+
+<H3>Thank-you's</H3>
+
+(in alphabetical order) 
+Erik van Blokland, Petr van Blokland, Jelle Bosma, Vincent Connare, 
+Simon Daniels, Hannes Famira, Greg Hitchcock, John Hudson, Jack Jansen,
+Antoine Leca, Werner Lemberg, Peter Lofting, Dave Opstad, Laurence Penney, 
+Guido van Rossum, Adam Twardoch. 
+
+<H3>Copyrights</H3>
+
+FontTools/TTX -- 1999-2002 Just van Rossum; Letterror (just@letterror.com) 
+
+</BODY>
+</HTML>