| /***************************************************************************/ |
| /* */ |
| /* cffgload.c */ |
| /* */ |
| /* OpenType Glyph Loader (body). */ |
| /* */ |
| /* Copyright 1996-2001, 2002 by */ |
| /* David Turner, Robert Wilhelm, and Werner Lemberg. */ |
| /* */ |
| /* This file is part of the FreeType project, and may only be used, */ |
| /* modified, and distributed under the terms of the FreeType project */ |
| /* license, LICENSE.TXT. By continuing to use, modify, or distribute */ |
| /* this file you indicate that you have read the license and */ |
| /* understand and accept it fully. */ |
| /* */ |
| /***************************************************************************/ |
| |
| |
| #include <ft2build.h> |
| #include FT_INTERNAL_DEBUG_H |
| #include FT_INTERNAL_CALC_H |
| #include FT_INTERNAL_STREAM_H |
| #include FT_INTERNAL_SFNT_H |
| #include FT_OUTLINE_H |
| #include FT_TRUETYPE_TAGS_H |
| #include FT_INTERNAL_POSTSCRIPT_HINTS_H |
| |
| #include "cffobjs.h" |
| #include "cffload.h" |
| #include "cffgload.h" |
| |
| #include "cfferrs.h" |
| |
| |
| /*************************************************************************/ |
| /* */ |
| /* The macro FT_COMPONENT is used in trace mode. It is an implicit */ |
| /* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */ |
| /* messages during execution. */ |
| /* */ |
| #undef FT_COMPONENT |
| #define FT_COMPONENT trace_cffgload |
| |
| |
| typedef enum CFF_Operator_ |
| { |
| cff_op_unknown = 0, |
| |
| cff_op_rmoveto, |
| cff_op_hmoveto, |
| cff_op_vmoveto, |
| |
| cff_op_rlineto, |
| cff_op_hlineto, |
| cff_op_vlineto, |
| |
| cff_op_rrcurveto, |
| cff_op_hhcurveto, |
| cff_op_hvcurveto, |
| cff_op_rcurveline, |
| cff_op_rlinecurve, |
| cff_op_vhcurveto, |
| cff_op_vvcurveto, |
| |
| cff_op_flex, |
| cff_op_hflex, |
| cff_op_hflex1, |
| cff_op_flex1, |
| |
| cff_op_endchar, |
| |
| cff_op_hstem, |
| cff_op_vstem, |
| cff_op_hstemhm, |
| cff_op_vstemhm, |
| |
| cff_op_hintmask, |
| cff_op_cntrmask, |
| cff_op_dotsection, /* deprecated, acts as no-op */ |
| |
| cff_op_abs, |
| cff_op_add, |
| cff_op_sub, |
| cff_op_div, |
| cff_op_neg, |
| cff_op_random, |
| cff_op_mul, |
| cff_op_sqrt, |
| |
| cff_op_blend, |
| |
| cff_op_drop, |
| cff_op_exch, |
| cff_op_index, |
| cff_op_roll, |
| cff_op_dup, |
| |
| cff_op_put, |
| cff_op_get, |
| cff_op_store, |
| cff_op_load, |
| |
| cff_op_and, |
| cff_op_or, |
| cff_op_not, |
| cff_op_eq, |
| cff_op_ifelse, |
| |
| cff_op_callsubr, |
| cff_op_callgsubr, |
| cff_op_return, |
| |
| /* do not remove */ |
| cff_op_max |
| |
| } CFF_Operator; |
| |
| |
| #define CFF_COUNT_CHECK_WIDTH 0x80 |
| #define CFF_COUNT_EXACT 0x40 |
| #define CFF_COUNT_CLEAR_STACK 0x20 |
| |
| |
| static const FT_Byte cff_argument_counts[] = |
| { |
| 0, /* unknown */ |
| |
| 2 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, /* rmoveto */ |
| 1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, |
| 1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, |
| |
| 0 | CFF_COUNT_CLEAR_STACK, /* rlineto */ |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| |
| 0 | CFF_COUNT_CLEAR_STACK, /* rrcurveto */ |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| 0 | CFF_COUNT_CLEAR_STACK, |
| |
| 13, /* flex */ |
| 7, |
| 9, |
| 11, |
| |
| 0 | CFF_COUNT_CHECK_WIDTH, /* endchar */ |
| |
| 2 | CFF_COUNT_CHECK_WIDTH, /* hstem */ |
| 2 | CFF_COUNT_CHECK_WIDTH, |
| 2 | CFF_COUNT_CHECK_WIDTH, |
| 2 | CFF_COUNT_CHECK_WIDTH, |
| |
| 0 | CFF_COUNT_CHECK_WIDTH, /* hintmask */ |
| 0 | CFF_COUNT_CHECK_WIDTH, /* cntrmask */ |
| 0, /* dotsection */ |
| |
| 1, /* abs */ |
| 2, |
| 2, |
| 2, |
| 1, |
| 0, |
| 2, |
| 1, |
| |
| 1, /* blend */ |
| |
| 1, /* drop */ |
| 2, |
| 1, |
| 2, |
| 1, |
| |
| 2, /* put */ |
| 1, |
| 4, |
| 3, |
| |
| 2, /* and */ |
| 2, |
| 1, |
| 2, |
| 4, |
| |
| 1, /* callsubr */ |
| 1, |
| 0 |
| }; |
| |
| |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /********** *********/ |
| /********** *********/ |
| /********** GENERIC CHARSTRING PARSING *********/ |
| /********** *********/ |
| /********** *********/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| |
| |
| /*************************************************************************/ |
| /* */ |
| /* <Function> */ |
| /* cff_builder_init */ |
| /* */ |
| /* <Description> */ |
| /* Initializes a given glyph builder. */ |
| /* */ |
| /* <InOut> */ |
| /* builder :: A pointer to the glyph builder to initialize. */ |
| /* */ |
| /* <Input> */ |
| /* face :: The current face object. */ |
| /* */ |
| /* size :: The current size object. */ |
| /* */ |
| /* glyph :: The current glyph object. */ |
| /* */ |
| static void |
| cff_builder_init( CFF_Builder* builder, |
| TT_Face face, |
| CFF_Size size, |
| CFF_GlyphSlot glyph, |
| FT_Bool hinting ) |
| { |
| builder->path_begun = 0; |
| builder->load_points = 1; |
| |
| builder->face = face; |
| builder->glyph = glyph; |
| builder->memory = face->root.memory; |
| |
| if ( glyph ) |
| { |
| FT_GlyphLoader loader = glyph->root.internal->loader; |
| |
| |
| builder->loader = loader; |
| builder->base = &loader->base.outline; |
| builder->current = &loader->current.outline; |
| FT_GlyphLoader_Rewind( loader ); |
| |
| builder->hint_flags = FT_FACE(face)->internal->hint_flags; |
| builder->hints_globals = 0; |
| builder->hints_funcs = 0; |
| |
| if ( hinting && size ) |
| { |
| builder->hints_globals = size->internal; |
| builder->hints_funcs = glyph->root.internal->glyph_hints; |
| } |
| } |
| |
| if ( size ) |
| { |
| builder->scale_x = size->metrics.x_scale; |
| builder->scale_y = size->metrics.y_scale; |
| } |
| |
| builder->pos_x = 0; |
| builder->pos_y = 0; |
| |
| builder->left_bearing.x = 0; |
| builder->left_bearing.y = 0; |
| builder->advance.x = 0; |
| builder->advance.y = 0; |
| } |
| |
| |
| /*************************************************************************/ |
| /* */ |
| /* <Function> */ |
| /* cff_builder_done */ |
| /* */ |
| /* <Description> */ |
| /* Finalizes a given glyph builder. Its contents can still be used */ |
| /* after the call, but the function saves important information */ |
| /* within the corresponding glyph slot. */ |
| /* */ |
| /* <Input> */ |
| /* builder :: A pointer to the glyph builder to finalize. */ |
| /* */ |
| static void |
| cff_builder_done( CFF_Builder* builder ) |
| { |
| CFF_GlyphSlot glyph = builder->glyph; |
| |
| |
| if ( glyph ) |
| glyph->root.outline = *builder->base; |
| } |
| |
| |
| /*************************************************************************/ |
| /* */ |
| /* <Function> */ |
| /* cff_compute_bias */ |
| /* */ |
| /* <Description> */ |
| /* Computes the bias value in dependence of the number of glyph */ |
| /* subroutines. */ |
| /* */ |
| /* <Input> */ |
| /* num_subrs :: The number of glyph subroutines. */ |
| /* */ |
| /* <Return> */ |
| /* The bias value. */ |
| static FT_Int |
| cff_compute_bias( FT_UInt num_subrs ) |
| { |
| FT_Int result; |
| |
| |
| if ( num_subrs < 1240 ) |
| result = 107; |
| else if ( num_subrs < 33900U ) |
| result = 1131; |
| else |
| result = 32768U; |
| |
| return result; |
| } |
| |
| |
| /*************************************************************************/ |
| /* */ |
| /* <Function> */ |
| /* cff_decoder_init */ |
| /* */ |
| /* <Description> */ |
| /* Initializes a given glyph decoder. */ |
| /* */ |
| /* <InOut> */ |
| /* decoder :: A pointer to the glyph builder to initialize. */ |
| /* */ |
| /* <Input> */ |
| /* face :: The current face object. */ |
| /* */ |
| /* size :: The current size object. */ |
| /* */ |
| /* slot :: The current glyph object. */ |
| /* */ |
| FT_LOCAL_DEF( void ) |
| cff_decoder_init( CFF_Decoder* decoder, |
| TT_Face face, |
| CFF_Size size, |
| CFF_GlyphSlot slot, |
| FT_Bool hinting ) |
| { |
| CFF_Font cff = (CFF_Font)face->extra.data; |
| |
| |
| /* clear everything */ |
| FT_MEM_SET( decoder, 0, sizeof ( *decoder ) ); |
| |
| /* initialize builder */ |
| cff_builder_init( &decoder->builder, face, size, slot, hinting ); |
| |
| /* initialize Type2 decoder */ |
| decoder->num_globals = cff->num_global_subrs; |
| decoder->globals = cff->global_subrs; |
| decoder->globals_bias = cff_compute_bias( decoder->num_globals ); |
| } |
| |
| |
| /* this function is used to select the locals subrs array */ |
| FT_LOCAL_DEF( void ) |
| cff_decoder_prepare( CFF_Decoder* decoder, |
| FT_UInt glyph_index ) |
| { |
| CFF_Font cff = (CFF_Font)decoder->builder.face->extra.data; |
| CFF_SubFont sub = &cff->top_font; |
| |
| |
| /* manage CID fonts */ |
| if ( cff->num_subfonts >= 1 ) |
| { |
| FT_Byte fd_index = cff_fd_select_get( &cff->fd_select, glyph_index ); |
| |
| |
| sub = cff->subfonts[fd_index]; |
| } |
| |
| decoder->num_locals = sub->num_local_subrs; |
| decoder->locals = sub->local_subrs; |
| decoder->locals_bias = cff_compute_bias( decoder->num_locals ); |
| |
| decoder->glyph_width = sub->private_dict.default_width; |
| decoder->nominal_width = sub->private_dict.nominal_width; |
| } |
| |
| |
| /* check that there is enough room for `count' more points */ |
| static FT_Error |
| check_points( CFF_Builder* builder, |
| FT_Int count ) |
| { |
| return FT_GlyphLoader_CheckPoints( builder->loader, count, 0 ); |
| } |
| |
| |
| /* add a new point, do not check space */ |
| static void |
| cff_builder_add_point( CFF_Builder* builder, |
| FT_Pos x, |
| FT_Pos y, |
| FT_Byte flag ) |
| { |
| FT_Outline* outline = builder->current; |
| |
| |
| if ( builder->load_points ) |
| { |
| FT_Vector* point = outline->points + outline->n_points; |
| FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points; |
| |
| |
| point->x = x >> 16; |
| point->y = y >> 16; |
| *control = (FT_Byte)( flag ? FT_Curve_Tag_On : FT_Curve_Tag_Cubic ); |
| |
| builder->last = *point; |
| } |
| |
| outline->n_points++; |
| } |
| |
| |
| /* check space for a new on-curve point, then add it */ |
| static FT_Error |
| cff_builder_add_point1( CFF_Builder* builder, |
| FT_Pos x, |
| FT_Pos y ) |
| { |
| FT_Error error; |
| |
| |
| error = check_points( builder, 1 ); |
| if ( !error ) |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| return error; |
| } |
| |
| |
| /* check room for a new contour, then add it */ |
| static FT_Error |
| cff_builder_add_contour( CFF_Builder* builder ) |
| { |
| FT_Outline* outline = builder->current; |
| FT_Error error; |
| |
| |
| if ( !builder->load_points ) |
| { |
| outline->n_contours++; |
| return CFF_Err_Ok; |
| } |
| |
| error = FT_GlyphLoader_CheckPoints( builder->loader, 0, 1 ); |
| if ( !error ) |
| { |
| if ( outline->n_contours > 0 ) |
| outline->contours[outline->n_contours - 1] = |
| (short)( outline->n_points - 1 ); |
| |
| outline->n_contours++; |
| } |
| |
| return error; |
| } |
| |
| |
| /* if a path was begun, add its first on-curve point */ |
| static FT_Error |
| cff_builder_start_point( CFF_Builder* builder, |
| FT_Pos x, |
| FT_Pos y ) |
| { |
| FT_Error error = 0; |
| |
| |
| /* test whether we are building a new contour */ |
| if ( !builder->path_begun ) |
| { |
| builder->path_begun = 1; |
| error = cff_builder_add_contour( builder ); |
| if ( !error ) |
| error = cff_builder_add_point1( builder, x, y ); |
| } |
| |
| return error; |
| } |
| |
| |
| /* close the current contour */ |
| static void |
| cff_builder_close_contour( CFF_Builder* builder ) |
| { |
| FT_Outline* outline = builder->current; |
| |
| |
| /* XXXX: We must not include the last point in the path if it */ |
| /* is located on the first point. */ |
| if ( outline->n_points > 1 ) |
| { |
| FT_Int first = 0; |
| FT_Vector* p1 = outline->points + first; |
| FT_Vector* p2 = outline->points + outline->n_points - 1; |
| FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points - 1; |
| |
| |
| if ( outline->n_contours > 1 ) |
| { |
| first = outline->contours[outline->n_contours - 2] + 1; |
| p1 = outline->points + first; |
| } |
| |
| /* `delete' last point only if it coincides with the first */ |
| /* point and if it is not a control point (which can happen). */ |
| if ( p1->x == p2->x && p1->y == p2->y ) |
| if ( *control == FT_Curve_Tag_On ) |
| outline->n_points--; |
| } |
| |
| if ( outline->n_contours > 0 ) |
| outline->contours[outline->n_contours - 1] = |
| (short)( outline->n_points - 1 ); |
| } |
| |
| |
| static FT_Int |
| cff_lookup_glyph_by_stdcharcode( CFF_Font cff, |
| FT_Int charcode ) |
| { |
| FT_UInt n; |
| FT_UShort glyph_sid; |
| |
| |
| /* check range of standard char code */ |
| if ( charcode < 0 || charcode > 255 ) |
| return -1; |
| |
| /* Get code to SID mapping from `cff_standard_encoding'. */ |
| glyph_sid = cff_get_standard_encoding( (FT_UInt)charcode ); |
| |
| for ( n = 0; n < cff->num_glyphs; n++ ) |
| { |
| if ( cff->charset.sids[n] == glyph_sid ) |
| return n; |
| } |
| |
| return -1; |
| } |
| |
| |
| static FT_Error |
| cff_operator_seac( CFF_Decoder* decoder, |
| FT_Pos adx, |
| FT_Pos ady, |
| FT_Int bchar, |
| FT_Int achar ) |
| { |
| FT_Error error; |
| FT_Int bchar_index, achar_index, n_base_points; |
| FT_Outline* base = decoder->builder.base; |
| TT_Face face = decoder->builder.face; |
| CFF_Font cff = (CFF_Font)(face->extra.data); |
| FT_Vector left_bearing, advance; |
| FT_Byte* charstring; |
| FT_ULong charstring_len; |
| |
| |
| bchar_index = cff_lookup_glyph_by_stdcharcode( cff, bchar ); |
| achar_index = cff_lookup_glyph_by_stdcharcode( cff, achar ); |
| |
| if ( bchar_index < 0 || achar_index < 0 ) |
| { |
| FT_ERROR(( "cff_operator_seac:" )); |
| FT_ERROR(( " invalid seac character code arguments\n" )); |
| return CFF_Err_Syntax_Error; |
| } |
| |
| /* If we are trying to load a composite glyph, do not load the */ |
| /* accent character and return the array of subglyphs. */ |
| if ( decoder->builder.no_recurse ) |
| { |
| FT_GlyphSlot glyph = (FT_GlyphSlot)decoder->builder.glyph; |
| FT_GlyphLoader loader = glyph->internal->loader; |
| FT_SubGlyph subg; |
| |
| |
| /* reallocate subglyph array if necessary */ |
| error = FT_GlyphLoader_CheckSubGlyphs( loader, 2 ); |
| if ( error ) |
| goto Exit; |
| |
| subg = loader->current.subglyphs; |
| |
| /* subglyph 0 = base character */ |
| subg->index = bchar_index; |
| subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES | |
| FT_SUBGLYPH_FLAG_USE_MY_METRICS; |
| subg->arg1 = 0; |
| subg->arg2 = 0; |
| subg++; |
| |
| /* subglyph 1 = accent character */ |
| subg->index = achar_index; |
| subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES; |
| subg->arg1 = adx; |
| subg->arg2 = ady; |
| |
| /* set up remaining glyph fields */ |
| glyph->num_subglyphs = 2; |
| glyph->subglyphs = loader->base.subglyphs; |
| glyph->format = ft_glyph_format_composite; |
| |
| loader->current.num_subglyphs = 2; |
| } |
| |
| /* First load `bchar' in builder */ |
| error = cff_index_access_element( &cff->charstrings_index, bchar_index, |
| &charstring, &charstring_len ); |
| if ( !error ) |
| { |
| error = cff_decoder_parse_charstrings( decoder, charstring, charstring_len ); |
| |
| if ( error ) |
| goto Exit; |
| |
| cff_index_forget_element( &cff->charstrings_index, &charstring ); |
| } |
| |
| n_base_points = base->n_points; |
| |
| /* Save the left bearing and width of the base character */ |
| /* as they will be erased by the next load. */ |
| |
| left_bearing = decoder->builder.left_bearing; |
| advance = decoder->builder.advance; |
| |
| decoder->builder.left_bearing.x = 0; |
| decoder->builder.left_bearing.y = 0; |
| |
| /* Now load `achar' on top of the base outline. */ |
| error = cff_index_access_element( &cff->charstrings_index, achar_index, |
| &charstring, &charstring_len ); |
| if ( !error ) |
| { |
| error = cff_decoder_parse_charstrings( decoder, charstring, charstring_len ); |
| |
| if ( error ) |
| goto Exit; |
| |
| cff_index_forget_element( &cff->charstrings_index, &charstring ); |
| } |
| |
| /* Restore the left side bearing and advance width */ |
| /* of the base character. */ |
| decoder->builder.left_bearing = left_bearing; |
| decoder->builder.advance = advance; |
| |
| /* Finally, move the accent. */ |
| if ( decoder->builder.load_points ) |
| { |
| FT_Outline dummy; |
| |
| |
| dummy.n_points = (short)( base->n_points - n_base_points ); |
| dummy.points = base->points + n_base_points; |
| |
| FT_Outline_Translate( &dummy, adx, ady ); |
| } |
| |
| Exit: |
| return error; |
| } |
| |
| |
| /*************************************************************************/ |
| /* */ |
| /* <Function> */ |
| /* cff_decoder_parse_charstrings */ |
| /* */ |
| /* <Description> */ |
| /* Parses a given Type 2 charstrings program. */ |
| /* */ |
| /* <InOut> */ |
| /* decoder :: The current Type 1 decoder. */ |
| /* */ |
| /* <Input> */ |
| /* charstring_base :: The base of the charstring stream. */ |
| /* */ |
| /* charstring_len :: The length in bytes of the charstring stream. */ |
| /* */ |
| /* <Return> */ |
| /* FreeType error code. 0 means success. */ |
| /* */ |
| FT_LOCAL_DEF( FT_Error ) |
| cff_decoder_parse_charstrings( CFF_Decoder* decoder, |
| FT_Byte* charstring_base, |
| FT_Int charstring_len ) |
| { |
| FT_Error error; |
| CFF_Decoder_Zone* zone; |
| FT_Byte* ip; |
| FT_Byte* limit; |
| CFF_Builder* builder = &decoder->builder; |
| FT_Pos x, y; |
| FT_Fixed seed; |
| FT_Fixed* stack; |
| |
| T2_Hints_Funcs hinter; |
| |
| |
| /* set default width */ |
| decoder->num_hints = 0; |
| decoder->read_width = 1; |
| |
| /* compute random seed from stack address of parameter */ |
| seed = (FT_Fixed)(char*)&seed ^ |
| (FT_Fixed)(char*)&decoder ^ |
| (FT_Fixed)(char*)&charstring_base; |
| seed = ( seed ^ ( seed >> 10 ) ^ ( seed >> 20 ) ) & 0xFFFF; |
| if ( seed == 0 ) |
| seed = 0x7384; |
| |
| /* initialize the decoder */ |
| decoder->top = decoder->stack; |
| decoder->zone = decoder->zones; |
| zone = decoder->zones; |
| stack = decoder->top; |
| |
| hinter = (T2_Hints_Funcs) builder->hints_funcs; |
| |
| builder->path_begun = 0; |
| |
| zone->base = charstring_base; |
| limit = zone->limit = charstring_base + charstring_len; |
| ip = zone->cursor = zone->base; |
| |
| error = CFF_Err_Ok; |
| |
| x = builder->pos_x; |
| y = builder->pos_y; |
| |
| /* begin hints recording session, if any */ |
| if ( hinter ) |
| hinter->open( hinter->hints ); |
| |
| /* now, execute loop */ |
| while ( ip < limit ) |
| { |
| CFF_Operator op; |
| FT_Byte v; |
| |
| |
| /********************************************************************/ |
| /* */ |
| /* Decode operator or operand */ |
| /* */ |
| v = *ip++; |
| if ( v >= 32 || v == 28 ) |
| { |
| FT_Int shift = 16; |
| FT_Int32 val; |
| |
| |
| /* this is an operand, push it on the stack */ |
| if ( v == 28 ) |
| { |
| if ( ip + 1 >= limit ) |
| goto Syntax_Error; |
| val = (FT_Short)( ( (FT_Short)ip[0] << 8 ) | ip[1] ); |
| ip += 2; |
| } |
| else if ( v < 247 ) |
| val = (FT_Long)v - 139; |
| else if ( v < 251 ) |
| { |
| if ( ip >= limit ) |
| goto Syntax_Error; |
| val = ( (FT_Long)v - 247 ) * 256 + *ip++ + 108; |
| } |
| else if ( v < 255 ) |
| { |
| if ( ip >= limit ) |
| goto Syntax_Error; |
| val = -( (FT_Long)v - 251 ) * 256 - *ip++ - 108; |
| } |
| else |
| { |
| if ( ip + 3 >= limit ) |
| goto Syntax_Error; |
| val = ( (FT_Int32)ip[0] << 24 ) | |
| ( (FT_Int32)ip[1] << 16 ) | |
| ( (FT_Int32)ip[2] << 8 ) | |
| ip[3]; |
| ip += 4; |
| shift = 0; |
| } |
| if ( decoder->top - stack >= CFF_MAX_OPERANDS ) |
| goto Stack_Overflow; |
| |
| val <<= shift; |
| *decoder->top++ = val; |
| |
| #ifdef FT_DEBUG_LEVEL_TRACE |
| if ( !( val & 0xFFFF ) ) |
| FT_TRACE4(( " %d", (FT_Int32)( val >> 16 ) )); |
| else |
| FT_TRACE4(( " %.2f", val / 65536.0 )); |
| #endif |
| |
| } |
| else |
| { |
| FT_Fixed* args = decoder->top; |
| FT_Int num_args = args - decoder->stack; |
| FT_Int req_args; |
| |
| |
| /* find operator */ |
| op = cff_op_unknown; |
| |
| switch ( v ) |
| { |
| case 1: |
| op = cff_op_hstem; |
| break; |
| case 3: |
| op = cff_op_vstem; |
| break; |
| case 4: |
| op = cff_op_vmoveto; |
| break; |
| case 5: |
| op = cff_op_rlineto; |
| break; |
| case 6: |
| op = cff_op_hlineto; |
| break; |
| case 7: |
| op = cff_op_vlineto; |
| break; |
| case 8: |
| op = cff_op_rrcurveto; |
| break; |
| case 10: |
| op = cff_op_callsubr; |
| break; |
| case 11: |
| op = cff_op_return; |
| break; |
| case 12: |
| { |
| if ( ip >= limit ) |
| goto Syntax_Error; |
| v = *ip++; |
| |
| switch ( v ) |
| { |
| case 0: |
| op = cff_op_dotsection; |
| break; |
| case 3: |
| op = cff_op_and; |
| break; |
| case 4: |
| op = cff_op_or; |
| break; |
| case 5: |
| op = cff_op_not; |
| break; |
| case 8: |
| op = cff_op_store; |
| break; |
| case 9: |
| op = cff_op_abs; |
| break; |
| case 10: |
| op = cff_op_add; |
| break; |
| case 11: |
| op = cff_op_sub; |
| break; |
| case 12: |
| op = cff_op_div; |
| break; |
| case 13: |
| op = cff_op_load; |
| break; |
| case 14: |
| op = cff_op_neg; |
| break; |
| case 15: |
| op = cff_op_eq; |
| break; |
| case 18: |
| op = cff_op_drop; |
| break; |
| case 20: |
| op = cff_op_put; |
| break; |
| case 21: |
| op = cff_op_get; |
| break; |
| case 22: |
| op = cff_op_ifelse; |
| break; |
| case 23: |
| op = cff_op_random; |
| break; |
| case 24: |
| op = cff_op_mul; |
| break; |
| case 26: |
| op = cff_op_sqrt; |
| break; |
| case 27: |
| op = cff_op_dup; |
| break; |
| case 28: |
| op = cff_op_exch; |
| break; |
| case 29: |
| op = cff_op_index; |
| break; |
| case 30: |
| op = cff_op_roll; |
| break; |
| case 34: |
| op = cff_op_hflex; |
| break; |
| case 35: |
| op = cff_op_flex; |
| break; |
| case 36: |
| op = cff_op_hflex1; |
| break; |
| case 37: |
| op = cff_op_flex1; |
| break; |
| default: |
| /* decrement ip for syntax error message */ |
| ip--; |
| } |
| } |
| break; |
| case 14: |
| op = cff_op_endchar; |
| break; |
| case 16: |
| op = cff_op_blend; |
| break; |
| case 18: |
| op = cff_op_hstemhm; |
| break; |
| case 19: |
| op = cff_op_hintmask; |
| break; |
| case 20: |
| op = cff_op_cntrmask; |
| break; |
| case 21: |
| op = cff_op_rmoveto; |
| break; |
| case 22: |
| op = cff_op_hmoveto; |
| break; |
| case 23: |
| op = cff_op_vstemhm; |
| break; |
| case 24: |
| op = cff_op_rcurveline; |
| break; |
| case 25: |
| op = cff_op_rlinecurve; |
| break; |
| case 26: |
| op = cff_op_vvcurveto; |
| break; |
| case 27: |
| op = cff_op_hhcurveto; |
| break; |
| case 29: |
| op = cff_op_callgsubr; |
| break; |
| case 30: |
| op = cff_op_vhcurveto; |
| break; |
| case 31: |
| op = cff_op_hvcurveto; |
| break; |
| default: |
| ; |
| } |
| if ( op == cff_op_unknown ) |
| goto Syntax_Error; |
| |
| /* check arguments */ |
| req_args = cff_argument_counts[op]; |
| if ( req_args & CFF_COUNT_CHECK_WIDTH ) |
| { |
| args = stack; |
| |
| if ( num_args > 0 && decoder->read_width ) |
| { |
| /* If `nominal_width' is non-zero, the number is really a */ |
| /* difference against `nominal_width'. Else, the number here */ |
| /* is truly a width, not a difference against `nominal_width'. */ |
| /* If the font does not set `nominal_width', then */ |
| /* `nominal_width' defaults to zero, and so we can set */ |
| /* `glyph_width' to `nominal_width' plus number on the stack */ |
| /* -- for either case. */ |
| |
| FT_Int set_width_ok; |
| |
| |
| switch ( op ) |
| { |
| case cff_op_hmoveto: |
| case cff_op_vmoveto: |
| set_width_ok = num_args & 2; |
| break; |
| |
| case cff_op_hstem: |
| case cff_op_vstem: |
| case cff_op_hstemhm: |
| case cff_op_vstemhm: |
| case cff_op_rmoveto: |
| set_width_ok = num_args & 1; |
| break; |
| |
| case cff_op_endchar: |
| /* If there is a width specified for endchar, we either have */ |
| /* 1 argument or 5 arguments. We like to argue. */ |
| set_width_ok = ( ( num_args == 5 ) || ( num_args == 1 ) ); |
| break; |
| |
| default: |
| set_width_ok = 0; |
| break; |
| } |
| |
| if ( set_width_ok ) |
| { |
| decoder->glyph_width = decoder->nominal_width + |
| ( stack[0] >> 16 ); |
| |
| /* Consumed an argument. */ |
| num_args--; |
| args++; |
| } |
| } |
| |
| decoder->read_width = 0; |
| req_args = 0; |
| } |
| |
| req_args &= 15; |
| if ( num_args < req_args ) |
| goto Stack_Underflow; |
| args -= req_args; |
| num_args -= req_args; |
| |
| switch ( op ) |
| { |
| case cff_op_hstem: |
| case cff_op_vstem: |
| case cff_op_hstemhm: |
| case cff_op_vstemhm: |
| /* the number of arguments is always even here */ |
| FT_TRACE4(( op == cff_op_hstem ? " hstem" : |
| ( op == cff_op_vstem ? " vstem" : |
| ( op == cff_op_hstemhm ? " hstemhm" : " vstemhm" ) ) )); |
| |
| if ( hinter ) |
| hinter->stems( hinter->hints, |
| ( op == cff_op_hstem || op == cff_op_hstemhm ), |
| num_args / 2, |
| args ); |
| |
| decoder->num_hints += num_args / 2; |
| args = stack; |
| break; |
| |
| case cff_op_hintmask: |
| case cff_op_cntrmask: |
| FT_TRACE4(( op == cff_op_hintmask ? " hintmask" : " cntrmask" )); |
| |
| /* implement vstem when needed -- */ |
| /* the specification doesn't say it, but this also works */ |
| /* with the 'cntrmask' operator */ |
| /* */ |
| if ( num_args > 0 ) |
| { |
| if ( hinter ) |
| hinter->stems( hinter->hints, |
| 0, |
| num_args / 2, |
| args ); |
| |
| decoder->num_hints += num_args / 2; |
| } |
| |
| if ( hinter ) |
| { |
| if ( op == cff_op_hintmask ) |
| hinter->hintmask( hinter->hints, |
| builder->current->n_points, |
| decoder->num_hints, |
| ip ); |
| else |
| hinter->counter( hinter->hints, |
| decoder->num_hints, |
| ip ); |
| } |
| |
| #ifdef FT_DEBUG_LEVEL_TRACE |
| { |
| FT_UInt maskbyte; |
| |
| |
| FT_TRACE4(( " " )); |
| |
| for ( maskbyte = 0; |
| maskbyte < (FT_UInt)(( decoder->num_hints + 7 ) >> 3); |
| maskbyte++, ip++ ) |
| FT_TRACE4(( "%02X", *ip )); |
| } |
| #else |
| ip += ( decoder->num_hints + 7 ) >> 3; |
| #endif |
| if ( ip >= limit ) |
| goto Syntax_Error; |
| args = stack; |
| break; |
| |
| case cff_op_rmoveto: |
| FT_TRACE4(( " rmoveto" )); |
| |
| cff_builder_close_contour( builder ); |
| builder->path_begun = 0; |
| x += args[0]; |
| y += args[1]; |
| args = stack; |
| break; |
| |
| case cff_op_vmoveto: |
| FT_TRACE4(( " vmoveto" )); |
| |
| cff_builder_close_contour( builder ); |
| builder->path_begun = 0; |
| y += args[0]; |
| args = stack; |
| break; |
| |
| case cff_op_hmoveto: |
| FT_TRACE4(( " hmoveto" )); |
| |
| cff_builder_close_contour( builder ); |
| builder->path_begun = 0; |
| x += args[0]; |
| args = stack; |
| break; |
| |
| case cff_op_rlineto: |
| FT_TRACE4(( " rlineto" )); |
| |
| if ( cff_builder_start_point ( builder, x, y ) || |
| check_points( builder, num_args / 2 ) ) |
| goto Memory_Error; |
| |
| if ( num_args < 2 || num_args & 1 ) |
| goto Stack_Underflow; |
| |
| args = stack; |
| while ( args < decoder->top ) |
| { |
| x += args[0]; |
| y += args[1]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| args += 2; |
| } |
| args = stack; |
| break; |
| |
| case cff_op_hlineto: |
| case cff_op_vlineto: |
| { |
| FT_Int phase = ( op == cff_op_hlineto ); |
| |
| |
| FT_TRACE4(( op == cff_op_hlineto ? " hlineto" |
| : " vlineto" )); |
| |
| if ( cff_builder_start_point ( builder, x, y ) || |
| check_points( builder, num_args ) ) |
| goto Memory_Error; |
| |
| args = stack; |
| while (args < decoder->top ) |
| { |
| if ( phase ) |
| x += args[0]; |
| else |
| y += args[0]; |
| |
| if ( cff_builder_add_point1( builder, x, y ) ) |
| goto Memory_Error; |
| |
| args++; |
| phase ^= 1; |
| } |
| args = stack; |
| } |
| break; |
| |
| case cff_op_rrcurveto: |
| FT_TRACE4(( " rrcurveto" )); |
| |
| /* check number of arguments; must be a multiple of 6 */ |
| if ( num_args % 6 != 0 ) |
| goto Stack_Underflow; |
| |
| if ( cff_builder_start_point ( builder, x, y ) || |
| check_points( builder, num_args / 2 ) ) |
| goto Memory_Error; |
| |
| args = stack; |
| while ( args < decoder->top ) |
| { |
| x += args[0]; |
| y += args[1]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[2]; |
| y += args[3]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[4]; |
| y += args[5]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| args += 6; |
| } |
| args = stack; |
| break; |
| |
| case cff_op_vvcurveto: |
| FT_TRACE4(( " vvcurveto" )); |
| |
| if ( cff_builder_start_point ( builder, x, y ) ) |
| goto Memory_Error; |
| |
| args = stack; |
| if ( num_args & 1 ) |
| { |
| x += args[0]; |
| args++; |
| num_args--; |
| } |
| |
| if ( num_args % 4 != 0 ) |
| goto Stack_Underflow; |
| |
| if ( check_points( builder, 3 * ( num_args / 4 ) ) ) |
| goto Memory_Error; |
| |
| while ( args < decoder->top ) |
| { |
| y += args[0]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[1]; |
| y += args[2]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| y += args[3]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| args += 4; |
| } |
| args = stack; |
| break; |
| |
| case cff_op_hhcurveto: |
| FT_TRACE4(( " hhcurveto" )); |
| |
| if ( cff_builder_start_point ( builder, x, y ) ) |
| goto Memory_Error; |
| |
| args = stack; |
| if ( num_args & 1 ) |
| { |
| y += args[0]; |
| args++; |
| num_args--; |
| } |
| |
| if ( num_args % 4 != 0 ) |
| goto Stack_Underflow; |
| |
| if ( check_points( builder, 3 * ( num_args / 4 ) ) ) |
| goto Memory_Error; |
| |
| while ( args < decoder->top ) |
| { |
| x += args[0]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[1]; |
| y += args[2]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[3]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| args += 4; |
| } |
| args = stack; |
| break; |
| |
| case cff_op_vhcurveto: |
| case cff_op_hvcurveto: |
| { |
| FT_Int phase; |
| |
| |
| FT_TRACE4(( op == cff_op_vhcurveto ? " vhcurveto" |
| : " hvcurveto" )); |
| |
| if ( cff_builder_start_point ( builder, x, y ) ) |
| goto Memory_Error; |
| |
| args = stack; |
| if (num_args < 4 || ( num_args % 4 ) > 1 ) |
| goto Stack_Underflow; |
| |
| if ( check_points( builder, ( num_args / 4 ) * 3 ) ) |
| goto Stack_Underflow; |
| |
| phase = ( op == cff_op_hvcurveto ); |
| |
| while ( num_args >= 4 ) |
| { |
| num_args -= 4; |
| if ( phase ) |
| { |
| x += args[0]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[1]; |
| y += args[2]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| y += args[3]; |
| if ( num_args == 1 ) |
| x += args[4]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| } |
| else |
| { |
| y += args[0]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[1]; |
| y += args[2]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[3]; |
| if ( num_args == 1 ) |
| y += args[4]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| } |
| args += 4; |
| phase ^= 1; |
| } |
| args = stack; |
| } |
| break; |
| |
| case cff_op_rlinecurve: |
| { |
| FT_Int num_lines = ( num_args - 6 ) / 2; |
| |
| |
| FT_TRACE4(( " rlinecurve" )); |
| |
| if ( num_args < 8 || ( num_args - 6 ) & 1 ) |
| goto Stack_Underflow; |
| |
| if ( cff_builder_start_point( builder, x, y ) || |
| check_points( builder, num_lines + 3 ) ) |
| goto Memory_Error; |
| |
| args = stack; |
| |
| /* first, add the line segments */ |
| while ( num_lines > 0 ) |
| { |
| x += args[0]; |
| y += args[1]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| args += 2; |
| num_lines--; |
| } |
| |
| /* then the curve */ |
| x += args[0]; |
| y += args[1]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[2]; |
| y += args[3]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[4]; |
| y += args[5]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| args = stack; |
| } |
| break; |
| |
| case cff_op_rcurveline: |
| { |
| FT_Int num_curves = ( num_args - 2 ) / 6; |
| |
| |
| FT_TRACE4(( " rcurveline" )); |
| |
| if ( num_args < 8 || ( num_args - 2 ) % 6 ) |
| goto Stack_Underflow; |
| |
| if ( cff_builder_start_point ( builder, x, y ) || |
| check_points( builder, num_curves*3 + 2 ) ) |
| goto Memory_Error; |
| |
| args = stack; |
| |
| /* first, add the curves */ |
| while ( num_curves > 0 ) |
| { |
| x += args[0]; |
| y += args[1]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[2]; |
| y += args[3]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| x += args[4]; |
| y += args[5]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| args += 6; |
| num_curves--; |
| } |
| |
| /* then the final line */ |
| x += args[0]; |
| y += args[1]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| args = stack; |
| } |
| break; |
| |
| case cff_op_hflex1: |
| { |
| FT_Pos start_y; |
| |
| |
| FT_TRACE4(( " hflex1" )); |
| |
| args = stack; |
| |
| /* adding five more points; 4 control points, 1 on-curve point */ |
| /* make sure we have enough space for the start point if it */ |
| /* needs to be added.. */ |
| if ( cff_builder_start_point( builder, x, y ) || |
| check_points( builder, 6 ) ) |
| goto Memory_Error; |
| |
| /* Record the starting point's y postion for later use */ |
| start_y = y; |
| |
| /* first control point */ |
| x += args[0]; |
| y += args[1]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* second control point */ |
| x += args[2]; |
| y += args[3]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* join point; on curve, with y-value the same as the last */ |
| /* control point's y-value */ |
| x += args[4]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| /* third control point, with y-value the same as the join */ |
| /* point's y-value */ |
| x += args[5]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* fourth control point */ |
| x += args[6]; |
| y += args[7]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* ending point, with y-value the same as the start */ |
| x += args[8]; |
| y = start_y; |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args = stack; |
| break; |
| } |
| |
| case cff_op_hflex: |
| { |
| FT_Pos start_y; |
| |
| |
| FT_TRACE4(( " hflex" )); |
| |
| args = stack; |
| |
| /* adding six more points; 4 control points, 2 on-curve points */ |
| if ( cff_builder_start_point( builder, x, y ) || |
| check_points ( builder, 6 ) ) |
| goto Memory_Error; |
| |
| /* record the starting point's y-position for later use */ |
| start_y = y; |
| |
| /* first control point */ |
| x += args[0]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* second control point */ |
| x += args[1]; |
| y += args[2]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* join point; on curve, with y-value the same as the last */ |
| /* control point's y-value */ |
| x += args[3]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| /* third control point, with y-value the same as the join */ |
| /* point's y-value */ |
| x += args[4]; |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* fourth control point */ |
| x += args[5]; |
| y = start_y; |
| cff_builder_add_point( builder, x, y, 0 ); |
| |
| /* ending point, with y-value the same as the start point's */ |
| /* y-value -- we don't add this point, though */ |
| x += args[6]; |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args = stack; |
| break; |
| } |
| |
| case cff_op_flex1: |
| { |
| FT_Pos start_x, start_y; /* record start x, y values for alter */ |
| /* use */ |
| FT_Int dx = 0, dy = 0; /* used in horizontal/vertical */ |
| /* algorithm below */ |
| FT_Int horizontal, count; |
| |
| |
| FT_TRACE4(( " flex1" )); |
| |
| /* adding six more points; 4 control points, 2 on-curve points */ |
| if ( cff_builder_start_point( builder, x, y ) || |
| check_points( builder, 6 ) ) |
| goto Memory_Error; |
| |
| /* record the starting point's x, y postion for later use */ |
| start_x = x; |
| start_y = y; |
| |
| /* XXX: figure out whether this is supposed to be a horizontal */ |
| /* or vertical flex; the Type 2 specification is vague... */ |
| |
| args = stack; |
| |
| /* grab up to the last argument */ |
| for ( count = 5; count > 0; count-- ) |
| { |
| dx += args[0]; |
| dy += args[1]; |
| args += 2; |
| } |
| |
| /* rewind */ |
| args = stack; |
| |
| if ( dx < 0 ) dx = -dx; |
| if ( dy < 0 ) dy = -dy; |
| |
| /* strange test, but here it is... */ |
| horizontal = ( dx > dy ); |
| |
| for ( count = 5; count > 0; count-- ) |
| { |
| x += args[0]; |
| y += args[1]; |
| cff_builder_add_point( builder, x, y, (FT_Bool)( count == 3 ) ); |
| args += 2; |
| } |
| |
| /* is last operand an x- or y-delta? */ |
| if ( horizontal ) |
| { |
| x += args[0]; |
| y = start_y; |
| } |
| else |
| { |
| x = start_x; |
| y += args[0]; |
| } |
| |
| cff_builder_add_point( builder, x, y, 1 ); |
| |
| args = stack; |
| break; |
| } |
| |
| case cff_op_flex: |
| { |
| FT_UInt count; |
| |
| |
| FT_TRACE4(( " flex" )); |
| |
| if ( cff_builder_start_point( builder, x, y ) || |
| check_points( builder, 6 ) ) |
| goto Memory_Error; |
| |
| args = stack; |
| for ( count = 6; count > 0; count-- ) |
| { |
| x += args[0]; |
| y += args[1]; |
| cff_builder_add_point( builder, x, y, |
| (FT_Bool)( count == 3 || count == 0 ) ); |
| args += 2; |
| } |
| |
| args = stack; |
| } |
| break; |
| |
| case cff_op_endchar: |
| FT_TRACE4(( " endchar" )); |
| |
| /* We are going to emulate the seac operator. */ |
| if ( num_args == 4 ) |
| { |
| error = cff_operator_seac( decoder, |
| args[0] >> 16, args[1] >> 16, |
| args[2] >> 16, args[3] >> 16 ); |
| args += 4; |
| } |
| |
| if ( !error ) |
| error = CFF_Err_Ok; |
| |
| cff_builder_close_contour( builder ); |
| |
| /* close hints recording session */ |
| if ( hinter ) |
| { |
| if (hinter->close( hinter->hints, builder->current->n_points ) ) |
| goto Syntax_Error; |
| |
| /* apply hints to the loaded glyph outline now */ |
| hinter->apply( hinter->hints, |
| builder->current, |
| (PSH_Globals)builder->hints_globals, |
| builder->hint_flags ); |
| } |
| |
| /* add current outline to the glyph slot */ |
| FT_GlyphLoader_Add( builder->loader ); |
| |
| /* return now! */ |
| FT_TRACE4(( "\n\n" )); |
| return error; |
| |
| case cff_op_abs: |
| FT_TRACE4(( " abs" )); |
| |
| if ( args[0] < 0 ) |
| args[0] = -args[0]; |
| args++; |
| break; |
| |
| case cff_op_add: |
| FT_TRACE4(( " add" )); |
| |
| args[0] += args[1]; |
| args++; |
| break; |
| |
| case cff_op_sub: |
| FT_TRACE4(( " sub" )); |
| |
| args[0] -= args[1]; |
| args++; |
| break; |
| |
| case cff_op_div: |
| FT_TRACE4(( " div" )); |
| |
| args[0] = FT_DivFix( args[0], args[1] ); |
| args++; |
| break; |
| |
| case cff_op_neg: |
| FT_TRACE4(( " neg" )); |
| |
| args[0] = -args[0]; |
| args++; |
| break; |
| |
| case cff_op_random: |
| { |
| FT_Fixed Rand; |
| |
| |
| FT_TRACE4(( " rand" )); |
| |
| Rand = seed; |
| if ( Rand >= 0x8000 ) |
| Rand++; |
| |
| args[0] = Rand; |
| seed = FT_MulFix( seed, 0x10000L - seed ); |
| if ( seed == 0 ) |
| seed += 0x2873; |
| args++; |
| } |
| break; |
| |
| case cff_op_mul: |
| FT_TRACE4(( " mul" )); |
| |
| args[0] = FT_MulFix( args[0], args[1] ); |
| args++; |
| break; |
| |
| case cff_op_sqrt: |
| FT_TRACE4(( " sqrt" )); |
| |
| if ( args[0] > 0 ) |
| { |
| FT_Int count = 9; |
| FT_Fixed root = args[0]; |
| FT_Fixed new_root; |
| |
| |
| for (;;) |
| { |
| new_root = ( root + FT_DivFix( args[0], root ) + 1 ) >> 1; |
| if ( new_root == root || count <= 0 ) |
| break; |
| root = new_root; |
| } |
| args[0] = new_root; |
| } |
| else |
| args[0] = 0; |
| args++; |
| break; |
| |
| case cff_op_drop: |
| /* nothing */ |
| FT_TRACE4(( " drop" )); |
| |
| break; |
| |
| case cff_op_exch: |
| { |
| FT_Fixed tmp; |
| |
| |
| FT_TRACE4(( " exch" )); |
| |
| tmp = args[0]; |
| args[0] = args[1]; |
| args[1] = tmp; |
| args += 2; |
| } |
| break; |
| |
| case cff_op_index: |
| { |
| FT_Int idx = args[0] >> 16; |
| |
| |
| FT_TRACE4(( " index" )); |
| |
| if ( idx < 0 ) |
| idx = 0; |
| else if ( idx > num_args - 2 ) |
| idx = num_args - 2; |
| args[0] = args[-( idx + 1 )]; |
| args++; |
| } |
| break; |
| |
| case cff_op_roll: |
| { |
| FT_Int count = (FT_Int)( args[0] >> 16 ); |
| FT_Int idx = (FT_Int)( args[1] >> 16 ); |
| |
| |
| FT_TRACE4(( " roll" )); |
| |
| if ( count <= 0 ) |
| count = 1; |
| |
| args -= count; |
| if ( args < stack ) |
| goto Stack_Underflow; |
| |
| if ( idx >= 0 ) |
| { |
| while ( idx > 0 ) |
| { |
| FT_Fixed tmp = args[count - 1]; |
| FT_Int i; |
| |
| |
| for ( i = count - 2; i >= 0; i-- ) |
| args[i + 1] = args[i]; |
| args[0] = tmp; |
| idx--; |
| } |
| } |
| else |
| { |
| while ( idx < 0 ) |
| { |
| FT_Fixed tmp = args[0]; |
| FT_Int i; |
| |
| |
| for ( i = 0; i < count - 1; i++ ) |
| args[i] = args[i + 1]; |
| args[count - 1] = tmp; |
| idx++; |
| } |
| } |
| args += count; |
| } |
| break; |
| |
| case cff_op_dup: |
| FT_TRACE4(( " dup" )); |
| |
| args[1] = args[0]; |
| args++; |
| break; |
| |
| case cff_op_put: |
| { |
| FT_Fixed val = args[0]; |
| FT_Int idx = (FT_Int)( args[1] >> 16 ); |
| |
| |
| FT_TRACE4(( " put" )); |
| |
| if ( idx >= 0 && idx < decoder->len_buildchar ) |
| decoder->buildchar[idx] = val; |
| } |
| break; |
| |
| case cff_op_get: |
| { |
| FT_Int idx = (FT_Int)( args[0] >> 16 ); |
| FT_Fixed val = 0; |
| |
| |
| FT_TRACE4(( " get" )); |
| |
| if ( idx >= 0 && idx < decoder->len_buildchar ) |
| val = decoder->buildchar[idx]; |
| |
| args[0] = val; |
| args++; |
| } |
| break; |
| |
| case cff_op_store: |
| FT_TRACE4(( " store ")); |
| |
| goto Unimplemented; |
| |
| case cff_op_load: |
| FT_TRACE4(( " load" )); |
| |
| goto Unimplemented; |
| |
| case cff_op_dotsection: |
| /* this operator is deprecated and ignored by the parser */ |
| FT_TRACE4(( " dotsection" )); |
| break; |
| |
| case cff_op_and: |
| { |
| FT_Fixed cond = args[0] && args[1]; |
| |
| |
| FT_TRACE4(( " and" )); |
| |
| args[0] = cond ? 0x10000L : 0; |
| args++; |
| } |
| break; |
| |
| case cff_op_or: |
| { |
| FT_Fixed cond = args[0] || args[1]; |
| |
| |
| FT_TRACE4(( " or" )); |
| |
| args[0] = cond ? 0x10000L : 0; |
| args++; |
| } |
| break; |
| |
| case cff_op_eq: |
| { |
| FT_Fixed cond = !args[0]; |
| |
| |
| FT_TRACE4(( " eq" )); |
| |
| args[0] = cond ? 0x10000L : 0; |
| args++; |
| } |
| break; |
| |
| case cff_op_ifelse: |
| { |
| FT_Fixed cond = (args[2] <= args[3]); |
| |
| |
| FT_TRACE4(( " ifelse" )); |
| |
| if ( !cond ) |
| args[0] = args[1]; |
| args++; |
| } |
| break; |
| |
| case cff_op_callsubr: |
| { |
| FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) + |
| decoder->locals_bias ); |
| |
| |
| FT_TRACE4(( " callsubr(%d)", idx )); |
| |
| if ( idx >= decoder->num_locals ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" )); |
| FT_ERROR(( " invalid local subr index\n" )); |
| goto Syntax_Error; |
| } |
| |
| if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " too many nested subrs\n" )); |
| goto Syntax_Error; |
| } |
| |
| zone->cursor = ip; /* save current instruction pointer */ |
| |
| zone++; |
| zone->base = decoder->locals[idx]; |
| zone->limit = decoder->locals[idx + 1]; |
| zone->cursor = zone->base; |
| |
| if ( !zone->base ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " invoking empty subrs!\n" )); |
| goto Syntax_Error; |
| } |
| |
| decoder->zone = zone; |
| ip = zone->base; |
| limit = zone->limit; |
| } |
| break; |
| |
| case cff_op_callgsubr: |
| { |
| FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) + |
| decoder->globals_bias ); |
| |
| |
| FT_TRACE4(( " callgsubr(%d)", idx )); |
| |
| if ( idx >= decoder->num_globals ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" )); |
| FT_ERROR(( " invalid global subr index\n" )); |
| goto Syntax_Error; |
| } |
| |
| if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " too many nested subrs\n" )); |
| goto Syntax_Error; |
| } |
| |
| zone->cursor = ip; /* save current instruction pointer */ |
| |
| zone++; |
| zone->base = decoder->globals[idx]; |
| zone->limit = decoder->globals[idx + 1]; |
| zone->cursor = zone->base; |
| |
| if ( !zone->base ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " invoking empty subrs!\n" )); |
| goto Syntax_Error; |
| } |
| |
| decoder->zone = zone; |
| ip = zone->base; |
| limit = zone->limit; |
| } |
| break; |
| |
| case cff_op_return: |
| FT_TRACE4(( " return" )); |
| |
| if ( decoder->zone <= decoder->zones ) |
| { |
| FT_ERROR(( "cff_decoder_parse_charstrings:" |
| " unexpected return\n" )); |
| goto Syntax_Error; |
| } |
| |
| decoder->zone--; |
| zone = decoder->zone; |
| ip = zone->cursor; |
| limit = zone->limit; |
| break; |
| |
| default: |
| Unimplemented: |
| FT_ERROR(( "Unimplemented opcode: %d", ip[-1] )); |
| |
| if ( ip[-1] == 12 ) |
| FT_ERROR(( " %d", ip[0] )); |
| FT_ERROR(( "\n" )); |
| |
| return CFF_Err_Unimplemented_Feature; |
| } |
| |
| decoder->top = args; |
| |
| } /* general operator processing */ |
| |
| } /* while ip < limit */ |
| |
| FT_TRACE4(( "..end..\n\n" )); |
| |
| return error; |
| |
| Syntax_Error: |
| FT_TRACE4(( "cff_decoder_parse_charstrings: syntax error!" )); |
| return CFF_Err_Invalid_File_Format; |
| |
| Stack_Underflow: |
| FT_TRACE4(( "cff_decoder_parse_charstrings: stack underflow!" )); |
| return CFF_Err_Too_Few_Arguments; |
| |
| Stack_Overflow: |
| FT_TRACE4(( "cff_decoder_parse_charstrings: stack overflow!" )); |
| return CFF_Err_Stack_Overflow; |
| |
| Memory_Error: |
| return builder->error; |
| } |
| |
| |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /********** *********/ |
| /********** *********/ |
| /********** COMPUTE THE MAXIMUM ADVANCE WIDTH *********/ |
| /********** *********/ |
| /********** The following code is in charge of computing *********/ |
| /********** the maximum advance width of the font. It *********/ |
| /********** quickly processes each glyph charstring to *********/ |
| /********** extract the value from either a `sbw' or `seac' *********/ |
| /********** operator. *********/ |
| /********** *********/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| |
| |
| #if 0 /* unused until we support pure CFF fonts */ |
| |
| |
| FT_LOCAL_DEF( FT_Error ) |
| cff_compute_max_advance( TT_Face face, |
| FT_Int* max_advance ) |
| { |
| FT_Error error = 0; |
| CFF_Decoder decoder; |
| FT_Int glyph_index; |
| CFF_Font cff = (CFF_Font)face->other; |
| |
| |
| *max_advance = 0; |
| |
| /* Initialize load decoder */ |
| cff_decoder_init( &decoder, face, 0, 0, 0 ); |
| |
| decoder.builder.metrics_only = 1; |
| decoder.builder.load_points = 0; |
| |
| /* For each glyph, parse the glyph charstring and extract */ |
| /* the advance width. */ |
| for ( glyph_index = 0; glyph_index < face->root.num_glyphs; |
| glyph_index++ ) |
| { |
| FT_Byte* charstring; |
| FT_ULong charstring_len; |
| |
| |
| /* now get load the unscaled outline */ |
| error = cff_index_access_element( &cff->charstrings_index, glyph_index, |
| &charstring, &charstring_len ); |
| if ( !error ) |
| { |
| cff_decoder_prepare( &decoder, glyph_index ); |
| error = cff_decoder_parse_charstrings( &decoder, |
| charstring, charstring_len ); |
| |
| cff_index_forget_element( &cff->charstrings_index, &charstring ); |
| } |
| |
| /* ignore the error if one has occurred -- skip to next glyph */ |
| error = 0; |
| } |
| |
| *max_advance = decoder.builder.advance.x; |
| |
| return CFF_Err_Ok; |
| } |
| |
| |
| #endif /* 0 */ |
| |
| |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /********** *********/ |
| /********** *********/ |
| /********** UNHINTED GLYPH LOADER *********/ |
| /********** *********/ |
| /********** The following code is in charge of loading a *********/ |
| /********** single outline. It completely ignores hinting *********/ |
| /********** and is used when FT_LOAD_NO_HINTING is set. *********/ |
| /********** *********/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| /*************************************************************************/ |
| |
| |
| FT_LOCAL_DEF( FT_Error ) |
| cff_slot_load( CFF_GlyphSlot glyph, |
| CFF_Size size, |
| FT_Int glyph_index, |
| FT_Int load_flags ) |
| { |
| FT_Error error; |
| CFF_Decoder decoder; |
| TT_Face face = (TT_Face)glyph->root.face; |
| FT_Bool hinting; |
| CFF_Font cff = (CFF_Font)face->extra.data; |
| |
| FT_Matrix font_matrix; |
| FT_Vector font_offset; |
| |
| |
| if ( load_flags & FT_LOAD_NO_RECURSE ) |
| load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING; |
| |
| glyph->x_scale = 0x10000L; |
| glyph->y_scale = 0x10000L; |
| if ( size ) |
| { |
| glyph->x_scale = size->metrics.x_scale; |
| glyph->y_scale = size->metrics.y_scale; |
| } |
| |
| glyph->root.outline.n_points = 0; |
| glyph->root.outline.n_contours = 0; |
| |
| hinting = FT_BOOL( ( load_flags & FT_LOAD_NO_SCALE ) == 0 && |
| ( load_flags & FT_LOAD_NO_HINTING ) == 0 ); |
| |
| glyph->root.format = ft_glyph_format_outline; /* by default */ |
| |
| { |
| FT_Byte* charstring; |
| FT_ULong charstring_len; |
| |
| |
| cff_decoder_init( &decoder, face, size, glyph, hinting ); |
| |
| decoder.builder.no_recurse = |
| (FT_Bool)( ( load_flags & FT_LOAD_NO_RECURSE ) != 0 ); |
| |
| /* now load the unscaled outline */ |
| error = cff_index_access_element( &cff->charstrings_index, glyph_index, |
| &charstring, &charstring_len ); |
| if ( !error ) |
| { |
| CFF_IndexRec csindex = cff->charstrings_index; |
| |
| |
| cff_decoder_prepare( &decoder, glyph_index ); |
| error = cff_decoder_parse_charstrings( &decoder, |
| charstring, charstring_len ); |
| |
| cff_index_forget_element( &cff->charstrings_index, &charstring ); |
| |
| /* We set control_data and control_len if charstrings is loaded. */ |
| /* See how charstring loads at cff_index_access_element() in */ |
| /* cffload.c. */ |
| |
| glyph->root.control_data = |
| csindex.bytes + csindex.offsets[glyph_index] - 1; |
| glyph->root.control_len = |
| charstring_len; |
| } |
| |
| /* save new glyph tables */ |
| cff_builder_done( &decoder.builder ); |
| } |
| |
| font_matrix = cff->top_font.font_dict.font_matrix; |
| font_offset = cff->top_font.font_dict.font_offset; |
| |
| /* Now, set the metrics -- this is rather simple, as */ |
| /* the left side bearing is the xMin, and the top side */ |
| /* bearing the yMax. */ |
| if ( !error ) |
| { |
| /* For composite glyphs, return only left side bearing and */ |
| /* advance width. */ |
| if ( load_flags & FT_LOAD_NO_RECURSE ) |
| { |
| FT_Slot_Internal internal = glyph->root.internal; |
| |
| |
| glyph->root.metrics.horiBearingX = decoder.builder.left_bearing.x; |
| glyph->root.metrics.horiAdvance = decoder.glyph_width; |
| internal->glyph_matrix = font_matrix; |
| internal->glyph_delta = font_offset; |
| internal->glyph_transformed = 1; |
| } |
| else |
| { |
| FT_BBox cbox; |
| FT_Glyph_Metrics* metrics = &glyph->root.metrics; |
| |
| |
| /* copy the _unscaled_ advance width */ |
| metrics->horiAdvance = decoder.glyph_width; |
| glyph->root.linearHoriAdvance = decoder.glyph_width; |
| glyph->root.internal->glyph_transformed = 0; |
| |
| /* make up vertical metrics */ |
| metrics->vertBearingX = 0; |
| metrics->vertBearingY = 0; |
| metrics->vertAdvance = 0; |
| |
| glyph->root.linearVertAdvance = 0; |
| |
| glyph->root.format = ft_glyph_format_outline; |
| |
| glyph->root.outline.flags = 0; |
| if ( size && size->metrics.y_ppem < 24 ) |
| glyph->root.outline.flags |= ft_outline_high_precision; |
| |
| glyph->root.outline.flags |= ft_outline_reverse_fill; |
| |
| /* apply the font matrix */ |
| FT_Outline_Transform( &glyph->root.outline, &font_matrix ); |
| |
| FT_Outline_Translate( &glyph->root.outline, |
| font_offset.x, |
| font_offset.y ); |
| |
| if ( ( load_flags & FT_LOAD_NO_SCALE ) == 0 ) |
| { |
| /* scale the outline and the metrics */ |
| FT_Int n; |
| FT_Outline* cur = &glyph->root.outline; |
| FT_Vector* vec = cur->points; |
| FT_Fixed x_scale = glyph->x_scale; |
| FT_Fixed y_scale = glyph->y_scale; |
| |
| |
| /* First of all, scale the points */ |
| if ( !hinting ) |
| for ( n = cur->n_points; n > 0; n--, vec++ ) |
| { |
| vec->x = FT_MulFix( vec->x, x_scale ); |
| vec->y = FT_MulFix( vec->y, y_scale ); |
| } |
| |
| FT_Outline_Get_CBox( &glyph->root.outline, &cbox ); |
| |
| /* Then scale the metrics */ |
| metrics->horiAdvance = FT_MulFix( metrics->horiAdvance, x_scale ); |
| metrics->vertAdvance = FT_MulFix( metrics->vertAdvance, y_scale ); |
| |
| metrics->vertBearingX = FT_MulFix( metrics->vertBearingX, x_scale ); |
| metrics->vertBearingY = FT_MulFix( metrics->vertBearingY, y_scale ); |
| |
| if ( hinting ) |
| { |
| metrics->horiAdvance = ( metrics->horiAdvance + 32 ) & -64; |
| metrics->vertAdvance = ( metrics->vertAdvance + 32 ) & -64; |
| |
| metrics->vertBearingX = ( metrics->vertBearingX + 32 ) & -64; |
| metrics->vertBearingY = ( metrics->vertBearingY + 32 ) & -64; |
| } |
| } |
| |
| /* compute the other metrics */ |
| FT_Outline_Get_CBox( &glyph->root.outline, &cbox ); |
| |
| /* grid fit the bounding box if necessary */ |
| if ( hinting ) |
| { |
| cbox.xMin &= -64; |
| cbox.yMin &= -64; |
| cbox.xMax = ( cbox.xMax + 63 ) & -64; |
| cbox.yMax = ( cbox.yMax + 63 ) & -64; |
| } |
| |
| metrics->width = cbox.xMax - cbox.xMin; |
| metrics->height = cbox.yMax - cbox.yMin; |
| |
| metrics->horiBearingX = cbox.xMin; |
| metrics->horiBearingY = cbox.yMax; |
| } |
| } |
| |
| return error; |
| } |
| |
| |
| /* END */ |