| /* gpt.cc -- Functions for loading, saving, and manipulating legacy MBR and GPT partition |
| data. */ |
| |
| /* By Rod Smith, January to February, 2009 */ |
| |
| /* This program is copyright (c) 2009 by Roderick W. Smith. It is distributed |
| under the terms of the GNU GPL version 2, as detailed in the COPYING file. */ |
| |
| #define __STDC_LIMIT_MACROS |
| #define __STDC_CONSTANT_MACROS |
| |
| #include <stdio.h> |
| #include <unistd.h> |
| #include <stdlib.h> |
| #include <stdint.h> |
| #include <fcntl.h> |
| #include <string.h> |
| #include <time.h> |
| #include <sys/stat.h> |
| #include <errno.h> |
| #include "crc32.h" |
| #include "gpt.h" |
| #include "bsd.h" |
| #include "support.h" |
| #include "parttypes.h" |
| #include "attributes.h" |
| |
| using namespace std; |
| |
| /**************************************** |
| * * |
| * GPTData class and related structures * |
| * * |
| ****************************************/ |
| |
| GPTData::GPTData(void) { |
| blockSize = SECTOR_SIZE; // set a default |
| diskSize = 0; |
| partitions = NULL; |
| state = gpt_valid; |
| strcpy(device, ""); |
| mainCrcOk = 0; |
| secondCrcOk = 0; |
| mainPartsCrcOk = 0; |
| secondPartsCrcOk = 0; |
| apmFound = 0; |
| bsdFound = 0; |
| srand((unsigned int) time(NULL)); |
| SetGPTSize(NUM_GPT_ENTRIES); |
| } // GPTData default constructor |
| |
| // The following constructor loads GPT data from a device file |
| GPTData::GPTData(char* filename) { |
| blockSize = SECTOR_SIZE; // set a default |
| diskSize = 0; |
| partitions = NULL; |
| state = gpt_invalid; |
| strcpy(device, ""); |
| mainCrcOk = 0; |
| secondCrcOk = 0; |
| mainPartsCrcOk = 0; |
| secondPartsCrcOk = 0; |
| apmFound = 0; |
| bsdFound = 0; |
| srand((unsigned int) time(NULL)); |
| LoadPartitions(filename); |
| } // GPTData(char* filename) constructor |
| |
| GPTData::~GPTData(void) { |
| free(partitions); |
| } // GPTData destructor |
| |
| // Resizes GPT to specified number of entries. Creates a new table if |
| // necessary, copies data if it already exists. |
| int GPTData::SetGPTSize(uint32_t numEntries) { |
| struct GPTPart* newParts; |
| struct GPTPart* trash; |
| uint32_t i, high, copyNum; |
| int allOK = 1; |
| |
| // First, adjust numEntries upward, if necessary, to get a number |
| // that fills the allocated sectors |
| i = blockSize / GPT_SIZE; |
| if ((numEntries % i) != 0) { |
| printf("Adjusting GPT size from %lu ", (unsigned long) numEntries); |
| numEntries = ((numEntries / i) + 1) * i; |
| printf("to %lu to fill the sector\n", (unsigned long) numEntries); |
| } // if |
| |
| newParts = (GPTPart*) calloc(numEntries, sizeof (GPTPart)); |
| if (newParts != NULL) { |
| if (partitions != NULL) { // existing partitions; copy them over |
| GetPartRange(&i, &high); |
| if (numEntries < (high + 1)) { // Highest entry too high for new # |
| printf("The highest-numbered partition is %lu, which is greater than the requested\n" |
| "partition table size of %d; cannot resize. Perhaps sorting will help.\n", |
| (unsigned long) (high + 1), numEntries); |
| allOK = 0; |
| } else { // go ahead with copy |
| if (numEntries < mainHeader.numParts) |
| copyNum = numEntries; |
| else |
| copyNum = mainHeader.numParts; |
| for (i = 0; i < copyNum; i++) { |
| newParts[i] = partitions[i]; |
| } // for |
| trash = partitions; |
| partitions = newParts; |
| free(trash); |
| } // if |
| } else { // No existing partition table; just create it |
| partitions = newParts; |
| } // if/else existing partitions |
| mainHeader.numParts = numEntries; |
| secondHeader.numParts = numEntries; |
| mainHeader.firstUsableLBA = ((numEntries * GPT_SIZE) / blockSize) + 2 ; |
| secondHeader.firstUsableLBA = mainHeader.firstUsableLBA; |
| mainHeader.lastUsableLBA = diskSize - mainHeader.firstUsableLBA; |
| secondHeader.lastUsableLBA = mainHeader.lastUsableLBA; |
| secondHeader.partitionEntriesLBA = secondHeader.lastUsableLBA + UINT64_C(1); |
| if (diskSize > 0) |
| CheckGPTSize(); |
| } else { // Bad memory allocation |
| fprintf(stderr, "Error allocating memory for partition table!\n"); |
| allOK = 0; |
| } // if/else |
| return (allOK); |
| } // GPTData::SetGPTSize() |
| |
| // Checks to see if the GPT tables overrun existing partitions; if they |
| // do, issues a warning but takes no action. Returns number of problems |
| // detected (0 if OK, 1 to 2 if problems). |
| int GPTData::CheckGPTSize(void) { |
| uint64_t overlap, firstUsedBlock, lastUsedBlock; |
| uint32_t i; |
| int numProbs = 0; |
| |
| // first, locate the first & last used blocks |
| firstUsedBlock = UINT64_MAX; |
| lastUsedBlock = 0; |
| for (i = 0; i < mainHeader.numParts; i++) { |
| if ((partitions[i].GetFirstLBA() < firstUsedBlock) && |
| (partitions[i].GetFirstLBA() != 0)) |
| firstUsedBlock = partitions[i].GetFirstLBA(); |
| if (partitions[i].GetLastLBA() > lastUsedBlock) |
| lastUsedBlock = partitions[i].GetLastLBA(); |
| } // for |
| |
| // If the disk size is 0 (the default), then it means that various |
| // variables aren't yet set, so the below tests will be useless; |
| // therefore we should skip everything |
| if (diskSize != 0) { |
| if (mainHeader.firstUsableLBA > firstUsedBlock) { |
| overlap = mainHeader.firstUsableLBA - firstUsedBlock; |
| printf("Warning! Main partition table overlaps the first partition by %lu blocks!\n", |
| (unsigned long) overlap); |
| if (firstUsedBlock > 2) { |
| printf("Try reducing the partition table size by %lu entries.\n", |
| (unsigned long) (overlap * 4)); |
| printf("(Use the 's' item on the experts' menu.)\n"); |
| } else { |
| printf("You will need to delete this partition or resize it in another utility.\n"); |
| } // if/else |
| numProbs++; |
| } // Problem at start of disk |
| if (mainHeader.lastUsableLBA < lastUsedBlock) { |
| overlap = lastUsedBlock - mainHeader.lastUsableLBA; |
| printf("Warning! Secondary partition table overlaps the last partition by %lu blocks\n", |
| (unsigned long) overlap); |
| if (lastUsedBlock > (diskSize - 2)) { |
| printf("You will need to delete this partition or resize it in another utility.\n"); |
| } else { |
| printf("Try reducing the partition table size by %lu entries.\n", |
| (unsigned long) (overlap * 4)); |
| printf("(Use the 's' item on the experts' menu.)\n"); |
| } // if/else |
| numProbs++; |
| } // Problem at end of disk |
| } // if (diskSize != 0) |
| return numProbs; |
| } // GPTData::CheckGPTSize() |
| |
| // Tell user whether Apple Partition Map (APM) was discovered.... |
| void GPTData::ShowAPMState(void) { |
| if (apmFound) |
| printf(" APM: present\n"); |
| else |
| printf(" APM: not present\n"); |
| } // GPTData::ShowAPMState() |
| |
| // Tell user about the state of the GPT data.... |
| void GPTData::ShowGPTState(void) { |
| switch (state) { |
| case gpt_invalid: |
| printf(" GPT: not present\n"); |
| break; |
| case gpt_valid: |
| printf(" GPT: present\n"); |
| break; |
| case gpt_corrupt: |
| printf(" GPT: damaged\n"); |
| break; |
| default: |
| printf("\a GPT: unknown -- bug!\n"); |
| break; |
| } // switch |
| } // GPTData::ShowGPTState() |
| |
| // Scan for partition data. This function loads the MBR data (regular MBR or |
| // protective MBR) and loads BSD disklabel data (which is probably invalid). |
| // It also looks for APM data, forces a load of GPT data, and summarizes |
| // the results. |
| void GPTData::PartitionScan(int fd) { |
| BSDData bsdDisklabel; |
| // int bsdFound; |
| |
| printf("Partition table scan:\n"); |
| |
| // Read the MBR & check for BSD disklabel |
| protectiveMBR.ReadMBRData(fd); |
| protectiveMBR.ShowState(); |
| bsdDisklabel.ReadBSDData(fd, 0, diskSize - 1); |
| bsdFound = bsdDisklabel.ShowState(); |
| // bsdDisklabel.DisplayBSDData(); |
| |
| // Load the GPT data, whether or not it's valid |
| ForceLoadGPTData(fd); |
| ShowAPMState(); // Show whether there's an Apple Partition Map present |
| ShowGPTState(); // Show GPT status |
| printf("\n"); |
| |
| if (apmFound) { |
| printf("\n*******************************************************************\n"); |
| printf("This disk appears to contain an Apple-format (APM) partition table!\n"); |
| printf("It will be destroyed if you continue!\n"); |
| printf("*******************************************************************\n\n\a"); |
| } // if |
| /* if (bsdFound) { |
| printf("\n*************************************************************************\n"); |
| printf("This disk appears to contain a BSD disklabel! It will be destroyed if you\n" |
| "continue!\n"); |
| printf("*************************************************************************\n\n\a"); |
| } // if */ |
| } // GPTData::PartitionScan() |
| |
| // Read GPT data from a disk. |
| int GPTData::LoadPartitions(char* deviceFilename) { |
| int fd, err; |
| int allOK = 1, i; |
| uint64_t firstBlock, lastBlock; |
| BSDData bsdDisklabel; |
| |
| if ((fd = open(deviceFilename, O_RDONLY)) != -1) { |
| // store disk information.... |
| diskSize = disksize(fd, &err); |
| blockSize = (uint32_t) GetBlockSize(fd); |
| strcpy(device, deviceFilename); |
| PartitionScan(fd); // Check for partition types & print summary |
| |
| switch (UseWhichPartitions()) { |
| case use_mbr: |
| XFormPartitions(); |
| break; |
| case use_bsd: |
| bsdDisklabel.ReadBSDData(fd, 0, diskSize - 1); |
| // bsdDisklabel.DisplayBSDData(); |
| ClearGPTData(); |
| protectiveMBR.MakeProtectiveMBR(1); // clear boot area (option 1) |
| XFormDisklabel(&bsdDisklabel, 0); |
| break; |
| case use_gpt: |
| break; |
| case use_new: |
| ClearGPTData(); |
| protectiveMBR.MakeProtectiveMBR(); |
| break; |
| } // switch |
| |
| // Now find the first and last sectors used by partitions... |
| if (allOK) { |
| firstBlock = mainHeader.backupLBA; // start high |
| lastBlock = 0; // start low |
| for (i = 0; i < mainHeader.numParts; i++) { |
| if ((partitions[i].GetFirstLBA() < firstBlock) && |
| (partitions[i].GetFirstLBA() > 0)) |
| firstBlock = partitions[i].GetFirstLBA(); |
| if (partitions[i].GetLastLBA() > lastBlock) |
| lastBlock = partitions[i].GetLastLBA(); |
| } // for |
| } // if |
| CheckGPTSize(); |
| } else { |
| allOK = 0; |
| fprintf(stderr, "Problem opening %s for reading! Error is %d\n", |
| deviceFilename, errno); |
| if (errno == EACCES) { // User is probably not running as root |
| fprintf(stderr, "You must run this program as root or use sudo!\n"); |
| } // if |
| } // if/else |
| return (allOK); |
| } // GPTData::LoadPartitions() |
| |
| // Loads the GPT, as much as possible. Returns 1 if this seems to have |
| // succeeded, 0 if there are obvious problems.... |
| int GPTData::ForceLoadGPTData(int fd) { |
| int allOK = 1, validHeaders; |
| off_t seekTo; |
| char* storage; |
| uint32_t newCRC, sizeOfParts; |
| |
| // Seek to and read the main GPT header |
| lseek64(fd, 512, SEEK_SET); |
| read(fd, &mainHeader, 512); // read main GPT header |
| mainCrcOk = CheckHeaderCRC(&mainHeader); |
| if (IsLittleEndian() == 0) // big-endian system; adjust header byte order.... |
| ReverseHeaderBytes(&mainHeader); |
| |
| // Load backup header, check its CRC, and store the results of |
| // the check for future reference |
| seekTo = (diskSize * blockSize) - UINT64_C(512); |
| if (lseek64(fd, seekTo, SEEK_SET) != (off_t) -1) { |
| read(fd, &secondHeader, 512); // read secondary GPT header |
| secondCrcOk = CheckHeaderCRC(&secondHeader); |
| if (IsLittleEndian() == 0) // big-endian system; adjust header byte order.... |
| ReverseHeaderBytes(&secondHeader); |
| } else { |
| allOK = 0; |
| state = gpt_invalid; |
| fprintf(stderr, "Unable to seek to secondary GPT at sector %llu!\n", |
| diskSize - (UINT64_C(1))); |
| } // if/else lseek |
| |
| // Return valid headers code: 0 = both headers bad; 1 = main header |
| // good, backup bad; 2 = backup header good, main header bad; |
| // 3 = both headers good. Note these codes refer to valid GPT |
| // signatures and version numbers; more subtle problems will elude |
| // this check! |
| validHeaders = CheckHeaderValidity(); |
| |
| // Read partitions (from primary array) |
| if (validHeaders > 0) { // if at least one header is OK.... |
| // GPT appears to be valid.... |
| state = gpt_valid; |
| |
| // We're calling the GPT valid, but there's a possibility that one |
| // of the two headers is corrupt. If so, use the one that seems to |
| // be in better shape to regenerate the bad one |
| if (validHeaders == 2) { // valid backup header, invalid main header |
| printf("Caution: invalid main GPT header, but valid backup; regenerating main header\n" |
| "from backup!\n"); |
| RebuildMainHeader(); |
| mainCrcOk = secondCrcOk; // Since copied, use CRC validity of backup |
| } else if (validHeaders == 1) { // valid main header, invalid backup |
| printf("Caution: invalid backup GPT header, but valid main header; regenerating\n" |
| "backup header from main header.\n"); |
| RebuildSecondHeader(); |
| secondCrcOk = mainCrcOk; // Since regenerated, use CRC validity of main |
| } // if/else/if |
| |
| // Load the main partition table, including storing results of its |
| // CRC check |
| if (LoadMainTable() == 0) |
| allOK = 0; |
| |
| // Load backup partition table into temporary storage to check |
| // its CRC and store the results, then discard this temporary |
| // storage, since we don't use it in any but recovery operations |
| seekTo = secondHeader.partitionEntriesLBA * (off_t) blockSize; |
| if ((lseek64(fd, seekTo, SEEK_SET) != (off_t) -1) && (secondCrcOk)) { |
| sizeOfParts = secondHeader.numParts * secondHeader.sizeOfPartitionEntries; |
| storage = (char*) malloc(sizeOfParts); |
| read(fd, storage, sizeOfParts); |
| newCRC = chksum_crc32((unsigned char*) storage, sizeOfParts); |
| free(storage); |
| secondPartsCrcOk = (newCRC == secondHeader.partitionEntriesCRC); |
| } // if |
| |
| // Check for valid CRCs and warn if there are problems |
| if ((mainCrcOk == 0) || (secondCrcOk == 0) || (mainPartsCrcOk == 0) || |
| (secondPartsCrcOk == 0)) { |
| printf("Warning! One or more CRCs don't match. You should repair the disk!\n"); |
| state = gpt_corrupt; |
| } // if |
| } else { |
| state = gpt_invalid; |
| } // if/else |
| return allOK; |
| } // GPTData::ForceLoadGPTData() |
| |
| // Loads the partition tables pointed to by the main GPT header. The |
| // main GPT header in memory MUST be valid for this call to do anything |
| // sensible! |
| int GPTData::LoadMainTable(void) { |
| int fd, retval = 0; |
| uint32_t newCRC, sizeOfParts; |
| |
| if ((fd = open(device, O_RDONLY)) != -1) { |
| // Set internal data structures for number of partitions on the disk |
| SetGPTSize(mainHeader.numParts); |
| |
| // Load main partition table, and record whether its CRC |
| // matches the stored value |
| lseek64(fd, mainHeader.partitionEntriesLBA * blockSize, SEEK_SET); |
| sizeOfParts = mainHeader.numParts * mainHeader.sizeOfPartitionEntries; |
| read(fd, partitions, sizeOfParts); |
| newCRC = chksum_crc32((unsigned char*) partitions, sizeOfParts); |
| mainPartsCrcOk = (newCRC == mainHeader.partitionEntriesCRC); |
| if (IsLittleEndian() == 0) |
| ReversePartitionBytes(); |
| retval = 1; |
| } // if |
| return retval; |
| } // GPTData::LoadMainTable() |
| |
| // Examines the MBR & GPT data, and perhaps asks the user questions, to |
| // determine which set of data to use: the MBR (use_mbr), the GPT (use_gpt), |
| // or create a new set of partitions (use_new) |
| WhichToUse GPTData::UseWhichPartitions(void) { |
| WhichToUse which = use_new; |
| MBRValidity mbrState; |
| int answer; |
| |
| mbrState = protectiveMBR.GetValidity(); |
| |
| if ((state == gpt_invalid) && ((mbrState == mbr) || (mbrState == hybrid))) { |
| printf("\n\a***************************************************************\n" |
| "Found invalid GPT and valid MBR; converting MBR to GPT format.\n" |
| "THIS OPERATON IS POTENTIALLY DESTRUCTIVE! Exit by typing 'q' if\n" |
| "you don't want to convert your MBR partitions to GPT format!\n" |
| "***************************************************************\n\n"); |
| which = use_mbr; |
| } // if |
| |
| if ((state == gpt_invalid) && bsdFound) { |
| printf("\n\a**********************************************************************\n" |
| "Found invalid GPT and valid BSD disklabel; converting BSD disklabel\n" |
| "to GPT format. THIS OPERATON IS POTENTIALLY DESTRUCTIVE! Your first\n" |
| "BSD partition will likely be unusable. Exit by typing 'q' if you don't\n" |
| "want to convert your BSD partitions to GPT format!\n" |
| "**********************************************************************\n\n"); |
| which = use_bsd; |
| } // if |
| |
| if ((state == gpt_valid) && (mbrState == gpt)) { |
| printf("Found valid GPT with protective MBR; using GPT.\n"); |
| which = use_gpt; |
| } // if |
| if ((state == gpt_valid) && (mbrState == hybrid)) { |
| printf("Found valid GPT with hybrid MBR; using GPT.\n"); |
| printf("\aIf you change GPT partitions, you may need to re-create the hybrid MBR!\n"); |
| which = use_gpt; |
| } // if |
| if ((state == gpt_valid) && (mbrState == invalid)) { |
| printf("\aFound valid GPT with corrupt MBR; using GPT and will create new\nprotective MBR on save.\n"); |
| which = use_gpt; |
| protectiveMBR.MakeProtectiveMBR(); |
| } // if |
| if ((state == gpt_valid) && (mbrState == mbr)) { |
| printf("Found valid MBR and GPT. Which do you want to use?\n"); |
| answer = GetNumber(1, 3, 2, (char*) " 1 - MBR\n 2 - GPT\n 3 - Create blank GPT\n\nYour answer: "); |
| if (answer == 1) { |
| which = use_mbr; |
| } else if (answer == 2) { |
| which = use_gpt; |
| protectiveMBR.MakeProtectiveMBR(); |
| printf("Using GPT and creating fresh protective MBR.\n"); |
| } else which = use_new; |
| } // if |
| |
| // Nasty decisions here -- GPT is present, but corrupt (bad CRCs or other |
| // problems) |
| if (state == gpt_corrupt) { |
| if ((mbrState == mbr) || (mbrState == hybrid)) { |
| printf("Found valid MBR and corrupt GPT. Which do you want to use? (Using the\n" |
| "GPT MAY permit recovery of GPT data.)\n"); |
| answer = GetNumber(1, 3, 2, (char*) " 1 - MBR\n 2 - GPT\n 3 - Create blank GPT\n\nYour answer: "); |
| if (answer == 1) { |
| which = use_mbr; |
| // protectiveMBR.MakeProtectiveMBR(); |
| } else if (answer == 2) { |
| which = use_gpt; |
| } else which = use_new; |
| } else if (mbrState == invalid) { |
| printf("Found invalid MBR and corrupt GPT. What do you want to do? (Using the\n" |
| "GPT MAY permit recovery of GPT data.)\n"); |
| answer = GetNumber(1, 2, 1, (char*) " 1 - GPT\n 2 - Create blank GPT\n\nYour answer: "); |
| if (answer == 1) { |
| which = use_gpt; |
| } else which = use_new; |
| } else { // corrupt GPT, MBR indicates it's a GPT disk.... |
| printf("\a\a****************************************************************************\n" |
| "Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk\n" |
| "verification and recovery are STRONGLY recommended.\n" |
| "****************************************************************************\n"); |
| } // if/else/else |
| } // if (corrupt GPT) |
| |
| if (which == use_new) |
| printf("Creating new GPT entries.\n"); |
| |
| return which; |
| } // UseWhichPartitions() |
| |
| void GPTData::ResizePartitionTable(void) { |
| int newSize; |
| char prompt[255]; |
| uint32_t curLow, curHigh; |
| |
| printf("Current partition table size is %lu.\n", |
| (unsigned long) mainHeader.numParts); |
| GetPartRange(&curLow, &curHigh); |
| curHigh++; // since GetPartRange() returns numbers starting from 0... |
| // There's no point in having fewer than four partitions.... |
| if (curHigh < 4) |
| curHigh = 4; |
| sprintf(prompt, "Enter new size (%d up, default %d): ", (int) curHigh, |
| (int) NUM_GPT_ENTRIES); |
| newSize = GetNumber(4, 65535, 128, prompt); |
| if (newSize < 128) { |
| printf("Caution: The partition table size should officially be 16KB or larger,\n" |
| "which works out to 128 entries. In practice, smaller tables seem to\n" |
| "work with most OSes, but this practice is risky. I'm proceeding with\n" |
| "the resize, but you may want to reconsider this action and undo it.\n\n"); |
| } // if |
| SetGPTSize(newSize); |
| } // GPTData::ResizePartitionTable() |
| |
| // Find the low and high used partition numbers (numbered from 0). |
| // Return value is the number of partitions found. Note that the |
| // *low and *high values are both set to 0 when no partitions |
| // are found, as well as when a single partition in the first |
| // position exists. Thus, the return value is the only way to |
| // tell when no partitions exist. |
| int GPTData::GetPartRange(uint32_t *low, uint32_t *high) { |
| uint32_t i; |
| int numFound = 0; |
| |
| *low = mainHeader.numParts + 1; // code for "not found" |
| *high = 0; |
| if (mainHeader.numParts > 0) { // only try if partition table exists... |
| for (i = 0; i < mainHeader.numParts; i++) { |
| if (partitions[i].GetFirstLBA() != UINT64_C(0)) { // it exists |
| *high = i; // since we're counting up, set the high value |
| // Set the low value only if it's not yet found... |
| if (*low == (mainHeader.numParts + 1)) *low = i; |
| numFound++; |
| } // if |
| } // for |
| } // if |
| |
| // Above will leave *low pointing to its "not found" value if no partitions |
| // are defined, so reset to 0 if this is the case.... |
| if (*low == (mainHeader.numParts + 1)) |
| *low = 0; |
| return numFound; |
| } // GPTData::GetPartRange() |
| |
| // Display the basic GPT data |
| void GPTData::DisplayGPTData(void) { |
| int i, j; |
| char sizeInSI[255]; // String to hold size of disk in SI units |
| char tempStr[255]; |
| uint64_t temp, totalFree; |
| |
| BytesToSI(diskSize * blockSize, sizeInSI); |
| printf("Disk %s: %lu sectors, %s\n", device, |
| (unsigned long) diskSize, sizeInSI); |
| printf("Disk identifier (GUID): %s\n", GUIDToStr(mainHeader.diskGUID, tempStr)); |
| printf("Partition table holds up to %lu entries\n", (unsigned long) mainHeader.numParts); |
| printf("First usable sector is %lu, last usable sector is %lu\n", |
| (unsigned long) mainHeader.firstUsableLBA, |
| (unsigned long) mainHeader.lastUsableLBA); |
| totalFree = FindFreeBlocks(&i, &temp); |
| printf("Total free space is %llu sectors (%s)\n", totalFree, |
| BytesToSI(totalFree * (uint64_t) blockSize, sizeInSI)); |
| printf("\nNumber Start (sector) End (sector) Size Code Name\n"); |
| for (i = 0; i < mainHeader.numParts; i++) { |
| partitions[i].ShowSummary(i, blockSize, sizeInSI); |
| } // for |
| } // GPTData::DisplayGPTData() |
| |
| // Get partition number from user and then call ShowPartDetails(partNum) |
| // to show its detailed information |
| void GPTData::ShowDetails(void) { |
| int partNum; |
| uint32_t low, high; |
| |
| if (GetPartRange(&low, &high) > 0) { |
| partNum = GetPartNum(); |
| ShowPartDetails(partNum); |
| } else { |
| printf("No partitions\n"); |
| } // if/else |
| } // GPTData::ShowDetails() |
| |
| // Show detailed information on the specified partition |
| void GPTData::ShowPartDetails(uint32_t partNum) { |
| if (partitions[partNum].GetFirstLBA() != 0) { |
| partitions[partNum].ShowDetails(blockSize); |
| } else { |
| printf("Partition #%d does not exist.", (int) (partNum + 1)); |
| } // if |
| } // GPTData::ShowPartDetails() |
| |
| // Interactively create a partition |
| void GPTData::CreatePartition(void) { |
| uint64_t firstBlock, lastBlock, sector; |
| char prompt[255]; |
| int partNum, firstFreePart = 0; |
| |
| // Find first free partition... |
| while (partitions[firstFreePart].GetFirstLBA() != 0) { |
| firstFreePart++; |
| } // while |
| |
| if (((firstBlock = FindFirstAvailable()) != 0) && |
| (firstFreePart < mainHeader.numParts)) { |
| lastBlock = FindLastAvailable(firstBlock); |
| |
| // Get partition number.... |
| do { |
| sprintf(prompt, "Partition number (%d-%d, default %d): ", firstFreePart + 1, |
| mainHeader.numParts, firstFreePart + 1); |
| partNum = GetNumber(firstFreePart + 1, mainHeader.numParts, |
| firstFreePart + 1, prompt) - 1; |
| if (partitions[partNum].GetFirstLBA() != 0) |
| printf("partition %d is in use.\n", partNum + 1); |
| } while (partitions[partNum].GetFirstLBA() != 0); |
| |
| // Get first block for new partition... |
| sprintf(prompt, "First sector (%llu-%llu, default = %llu): ", firstBlock, |
| lastBlock, firstBlock); |
| do { |
| sector = GetNumber(firstBlock, lastBlock, firstBlock, prompt); |
| } while (IsFree(sector) == 0); |
| firstBlock = sector; |
| |
| // Get last block for new partitions... |
| lastBlock = FindLastInFree(firstBlock); |
| sprintf(prompt, "Last sector or +size or +sizeM or +sizeK (%llu-%llu, default = %d): ", |
| firstBlock, lastBlock, lastBlock); |
| do { |
| sector = GetLastSector(firstBlock, lastBlock, prompt); |
| } while (IsFree(sector) == 0); |
| lastBlock = sector; |
| |
| partitions[partNum].SetFirstLBA(firstBlock); |
| partitions[partNum].SetLastLBA(lastBlock); |
| |
| partitions[partNum].SetUniqueGUID(1); |
| partitions[partNum].ChangeType(); |
| partitions[partNum].SetName((unsigned char*) partitions[partNum].GetNameType(prompt)); |
| } else { |
| printf("No free sectors available\n"); |
| } // if/else |
| } // GPTData::CreatePartition() |
| |
| // Interactively delete a partition (duh!) |
| void GPTData::DeletePartition(void) { |
| int partNum; |
| uint32_t low, high; |
| char prompt[255]; |
| |
| if (GetPartRange(&low, &high) > 0) { |
| sprintf(prompt, "Partition number (%d-%d): ", low + 1, high + 1); |
| partNum = GetNumber(low + 1, high + 1, low, prompt); |
| partitions[partNum - 1].BlankPartition(); |
| } else { |
| printf("No partitions\n"); |
| } // if/else |
| } // GPTData::DeletePartition() |
| |
| // Find the first available block after the starting point; returns 0 if |
| // there are no available blocks left |
| uint64_t GPTData::FindFirstAvailable(uint64_t start) { |
| uint64_t first; |
| uint32_t i; |
| int firstMoved = 0; |
| |
| // Begin from the specified starting point or from the first usable |
| // LBA, whichever is greater... |
| if (start < mainHeader.firstUsableLBA) |
| first = mainHeader.firstUsableLBA; |
| else |
| first = start; |
| |
| // ...now search through all partitions; if first is within an |
| // existing partition, move it to the next sector after that |
| // partition and repeat. If first was moved, set firstMoved |
| // flag; repeat until firstMoved is not set, so as to catch |
| // cases where partitions are out of sequential order.... |
| do { |
| firstMoved = 0; |
| for (i = 0; i < mainHeader.numParts; i++) { |
| if ((first >= partitions[i].GetFirstLBA()) && |
| (first <= partitions[i].GetLastLBA())) { // in existing part. |
| first = partitions[i].GetLastLBA() + 1; |
| firstMoved = 1; |
| } // if |
| } // for |
| } while (firstMoved == 1); |
| if (first > mainHeader.lastUsableLBA) |
| first = 0; |
| return (first); |
| } // GPTData::FindFirstAvailable() |
| |
| // Find the last available block on the disk at or after the start |
| // block. Returns 0 if there are no available partitions after |
| // (or including) start. |
| uint64_t GPTData::FindLastAvailable(uint64_t start) { |
| uint64_t last; |
| uint32_t i; |
| int lastMoved = 0; |
| |
| // Start by assuming the last usable LBA is available.... |
| last = mainHeader.lastUsableLBA; |
| |
| // ...now, similar to algorithm in FindFirstAvailable(), search |
| // through all partitions, moving last when it's in an existing |
| // partition. Set the lastMoved flag so we repeat to catch cases |
| // where partitions are out of logical order. |
| do { |
| lastMoved = 0; |
| for (i = 0; i < mainHeader.numParts; i++) { |
| if ((last >= partitions[i].GetFirstLBA()) && |
| (last <= partitions[i].GetLastLBA())) { // in existing part. |
| last = partitions[i].GetFirstLBA() - 1; |
| lastMoved = 1; |
| } // if |
| } // for |
| } while (lastMoved == 1); |
| if (last < mainHeader.firstUsableLBA) |
| last = 0; |
| return (last); |
| } // GPTData::FindLastAvailable() |
| |
| // Find the last available block in the free space pointed to by start. |
| uint64_t GPTData::FindLastInFree(uint64_t start) { |
| uint64_t nearestStart; |
| uint32_t i; |
| |
| nearestStart = mainHeader.lastUsableLBA; |
| for (i = 0; i < mainHeader.numParts; i++) { |
| if ((nearestStart > partitions[i].GetFirstLBA()) && |
| (partitions[i].GetFirstLBA() > start)) { |
| nearestStart = partitions[i].GetFirstLBA() - 1; |
| } // if |
| } // for |
| return (nearestStart); |
| } // GPTData::FindLastInFree() |
| |
| // Returns 1 if sector is unallocated, 0 if it's allocated to a partition |
| int GPTData::IsFree(uint64_t sector) { |
| int isFree = 1; |
| uint32_t i; |
| |
| for (i = 0; i < mainHeader.numParts; i++) { |
| if ((sector >= partitions[i].GetFirstLBA()) && |
| (sector <= partitions[i].GetLastLBA())) { |
| isFree = 0; |
| } // if |
| } // for |
| if ((sector < mainHeader.firstUsableLBA) || |
| (sector > mainHeader.lastUsableLBA)) { |
| isFree = 0; |
| } // if |
| return (isFree); |
| } // GPTData::IsFree() |
| |
| int GPTData::XFormPartitions(void) { |
| int i, numToConvert; |
| uint8_t origType; |
| struct newGUID; |
| char name[NAME_SIZE]; |
| |
| // Clear out old data & prepare basics.... |
| ClearGPTData(); |
| |
| // Convert the smaller of the # of GPT or MBR partitions |
| if (mainHeader.numParts > (NUM_LOGICALS + 4)) |
| numToConvert = NUM_LOGICALS + 4; |
| else |
| numToConvert = mainHeader.numParts; |
| |
| for (i = 0; i < numToConvert; i++) { |
| origType = protectiveMBR.GetType(i); |
| // don't waste CPU time trying to convert extended, hybrid protective, or |
| // null (non-existent) partitions |
| if ((origType != 0x05) && (origType != 0x0f) && (origType != 0x85) && |
| (origType != 0x00) && (origType != 0xEE)) |
| partitions[i] = protectiveMBR.AsGPT(i); |
| } // for |
| |
| // Convert MBR into protective MBR |
| protectiveMBR.MakeProtectiveMBR(); |
| |
| // Record that all original CRCs were OK so as not to raise flags |
| // when doing a disk verification |
| mainCrcOk = secondCrcOk = mainPartsCrcOk = secondPartsCrcOk = 1; |
| |
| return (1); |
| } // GPTData::XFormPartitions() |
| |
| // Transforms BSD disklable on the specified partition (numbered from 0). |
| // If an invalid partition number is given, the program prompts for one. |
| // Returns the number of new partitions created. |
| int GPTData::XFormDisklabel(int i) { |
| uint32_t low, high, partNum, startPart; |
| uint16_t hexCode; |
| int goOn = 1, numDone = 0; |
| BSDData disklabel; |
| |
| if (GetPartRange(&low, &high) != 0) { |
| if ((i < low) || (i > high)) |
| partNum = GetPartNum(); |
| else |
| partNum = (uint32_t) i; |
| |
| // Find the partition after the last used one |
| startPart = high + 1; |
| |
| // Now see if the specified partition has a BSD type code.... |
| hexCode = partitions[partNum].GetHexType(); |
| if ((hexCode != 0xa500) && (hexCode != 0xa900)) { |
| printf("Specified partition doesn't have a disklabel partition type " |
| "code.\nContinue anyway?"); |
| goOn = (GetYN() == 'Y'); |
| } // if |
| |
| // If all is OK, read the disklabel and convert it. |
| if (goOn) { |
| goOn = disklabel.ReadBSDData(device, partitions[partNum].GetFirstLBA(), |
| partitions[partNum].GetLastLBA()); |
| if ((goOn) && (disklabel.IsDisklabel())) { |
| numDone = XFormDisklabel(&disklabel, startPart); |
| if (numDone == 1) |
| printf("Converted %d BSD partition.\n", numDone); |
| else |
| printf("Converted %d BSD partitions.\n", numDone); |
| } else { |
| printf("Unable to convert partitions! Unrecognized BSD disklabel.\n"); |
| } // if/else |
| } // if |
| if (numDone > 0) { // converted partitions; delete carrier |
| partitions[partNum].BlankPartition(); |
| } // if |
| } else { |
| printf("No partitions\n"); |
| } // if/else |
| return numDone; |
| } // GPTData::XFormDisklable(int i) |
| |
| // Transform the partitions on an already-loaded BSD disklabel... |
| int GPTData::XFormDisklabel(BSDData* disklabel, int startPart) { |
| int i, numDone = 0; |
| |
| if ((disklabel->IsDisklabel()) && (startPart >= 0) && |
| (startPart < mainHeader.numParts)) { |
| for (i = 0; i < disklabel->GetNumParts(); i++) { |
| partitions[i + startPart] = disklabel->AsGPT(i); |
| if (partitions[i + startPart].GetFirstLBA() != UINT64_C(0)) |
| numDone++; |
| } // for |
| } // if |
| |
| // Record that all original CRCs were OK so as not to raise flags |
| // when doing a disk verification |
| mainCrcOk = secondCrcOk = mainPartsCrcOk = secondPartsCrcOk = 1; |
| |
| return numDone; |
| } // GPTData::XFormDisklabel(BSDData* disklabel) |
| |
| // Sort the GPT entries, eliminating gaps and making for a logical |
| // ordering. Relies on QuickSortGPT() for the bulk of the work |
| void GPTData::SortGPT(void) { |
| int i, lastPart = 0; |
| GPTPart temp; |
| |
| // First, find the last partition with data, so as not to |
| // spend needless time sorting empty entries.... |
| for (i = 0; i < mainHeader.numParts; i++) { |
| if (partitions[i].GetFirstLBA() > 0) |
| lastPart = i; |
| } // for |
| |
| // Now swap empties with the last partitions, to simplify the logic |
| // in the Quicksort function.... |
| i = 0; |
| while (i < lastPart) { |
| if (partitions[i].GetFirstLBA() == 0) { |
| temp = partitions[i]; |
| partitions[i] = partitions[lastPart]; |
| partitions[lastPart] = temp; |
| lastPart--; |
| } // if |
| i++; |
| } // while |
| |
| // Now call the recursive quick sort routine to do the real work.... |
| QuickSortGPT(partitions, 0, lastPart); |
| } // GPTData::SortGPT() |
| |
| // Blank the partition array |
| void GPTData::BlankPartitions(void) { |
| uint32_t i; |
| |
| for (i = 0; i < mainHeader.numParts; i++) { |
| partitions[i].BlankPartition(); |
| } // for |
| } // GPTData::BlankPartitions() |
| |
| // Set up data structures for entirely new set of partitions on the |
| // specified device. Returns 1 if OK, 0 if there were problems. |
| int GPTData::ClearGPTData(void) { |
| int goOn, i; |
| |
| // Set up the partition table.... |
| free(partitions); |
| partitions = NULL; |
| SetGPTSize(NUM_GPT_ENTRIES); |
| |
| // Now initialize a bunch of stuff that's static.... |
| mainHeader.signature = GPT_SIGNATURE; |
| mainHeader.revision = 0x00010000; |
| mainHeader.headerSize = (uint32_t) HEADER_SIZE; |
| mainHeader.reserved = 0; |
| mainHeader.currentLBA = UINT64_C(1); |
| mainHeader.partitionEntriesLBA = (uint64_t) 2; |
| mainHeader.sizeOfPartitionEntries = GPT_SIZE; |
| for (i = 0; i < GPT_RESERVED; i++) { |
| mainHeader.reserved2[i] = '\0'; |
| } // for |
| |
| // Now some semi-static items (computed based on end of disk) |
| mainHeader.backupLBA = diskSize - UINT64_C(1); |
| mainHeader.lastUsableLBA = diskSize - mainHeader.firstUsableLBA; |
| |
| // Set a unique GUID for the disk, based on random numbers |
| // rand() is only 32 bits, so multiply together to fill a 64-bit value |
| mainHeader.diskGUID.data1 = (uint64_t) rand() * (uint64_t) rand(); |
| mainHeader.diskGUID.data2 = (uint64_t) rand() * (uint64_t) rand(); |
| |
| // Copy main header to backup header |
| RebuildSecondHeader(); |
| |
| // Blank out the partitions array.... |
| BlankPartitions(); |
| |
| // Flag all CRCs as being OK.... |
| mainCrcOk = 1; |
| secondCrcOk = 1; |
| mainPartsCrcOk = 1; |
| secondPartsCrcOk = 1; |
| |
| return (goOn); |
| } // GPTData::ClearGPTData() |
| |
| // Prompt user for a partition number, then change its type code |
| // using ChangeGPTType(struct GPTPartition*) function. |
| void GPTData::ChangePartType(void) { |
| int partNum; |
| uint32_t low, high; |
| |
| if (GetPartRange(&low, &high) > 0) { |
| partNum = GetPartNum(); |
| partitions[partNum].ChangeType(); |
| } else { |
| printf("No partitions\n"); |
| } // if/else |
| } // GPTData::ChangePartType() |
| |
| // Prompts user for partition number and returns the result. |
| uint32_t GPTData::GetPartNum(void) { |
| uint32_t partNum; |
| uint32_t low, high; |
| char prompt[255]; |
| |
| if (GetPartRange(&low, &high) > 0) { |
| sprintf(prompt, "Partition number (%d-%d): ", low + 1, high + 1); |
| partNum = GetNumber(low + 1, high + 1, low, prompt); |
| } else partNum = 1; |
| return (partNum - 1); |
| } // GPTData::GetPartNum() |
| |
| void GPTData::SetAttributes(uint32_t partNum) { |
| Attributes theAttr; |
| |
| theAttr.SetAttributes(partitions[partNum].GetAttributes()); |
| theAttr.DisplayAttributes(); |
| theAttr.ChangeAttributes(); |
| partitions[partNum].SetAttributes(theAttr.GetAttributes()); |
| } // GPTData::SetAttributes() |
| |
| void GPTData::SetName(uint32_t partNum, char* theName) { |
| if ((partNum >= 0) && (partNum < mainHeader.numParts)) |
| if (partitions[partNum].GetFirstLBA() > 0) |
| partitions[partNum].SetName((unsigned char*) theName); |
| } // GPTData::SetName |
| |
| // Set the disk GUID to the specified value. Note that the header CRCs must |
| // be recomputed after calling this function. |
| void GPTData::SetDiskGUID(GUIDData newGUID) { |
| mainHeader.diskGUID = newGUID; |
| secondHeader.diskGUID = newGUID; |
| } // SetDiskGUID() |
| |
| // Set the unique GUID of the specified partition. Returns 1 on |
| // successful completion, 0 if there were problems (invalid |
| // partition number). |
| int GPTData::SetPartitionGUID(uint32_t pn, GUIDData theGUID) { |
| int retval = 0; |
| |
| if (pn < mainHeader.numParts) { |
| if (partitions[pn].GetFirstLBA() != UINT64_C(0)) { |
| partitions[pn].SetUniqueGUID(theGUID); |
| retval = 1; |
| } // if |
| } // if |
| return retval; |
| } // GPTData::SetPartitionGUID() |
| |
| // Check the validity of the GPT header. Returns 1 if the main header |
| // is valid, 2 if the backup header is valid, 3 if both are valid, and |
| // 0 if neither is valid. Note that this function just checks the GPT |
| // signature and revision numbers, not CRCs or other data. |
| int GPTData::CheckHeaderValidity(void) { |
| int valid = 3; |
| |
| if (mainHeader.signature != GPT_SIGNATURE) { |
| valid -= 1; |
| // printf("Main GPT signature invalid; read 0x%016llX, should be\n0x%016llX\n", |
| // (unsigned long long) mainHeader.signature, (unsigned long long) GPT_SIGNATURE); |
| } else if ((mainHeader.revision != 0x00010000) && valid) { |
| valid -= 1; |
| printf("Unsupported GPT version in main header; read 0x%08lX, should be\n0x%08lX\n", |
| (unsigned long) mainHeader.revision, UINT32_C(0x00010000)); |
| } // if/else/if |
| |
| if (secondHeader.signature != GPT_SIGNATURE) { |
| valid -= 2; |
| // printf("Secondary GPT signature invalid; read 0x%016llX, should be\n0x%016llX\n", |
| // (unsigned long long) secondHeader.signature, (unsigned long long) GPT_SIGNATURE); |
| } else if ((secondHeader.revision != 0x00010000) && valid) { |
| valid -= 2; |
| printf("Unsupported GPT version in backup header; read 0x%08lX, should be\n0x%08lX\n", |
| (unsigned long) mainHeader.revision, UINT32_C(0x00010000)); |
| } // if/else/if |
| |
| // If MBR bad, check for an Apple disk signature |
| if ((protectiveMBR.GetValidity() == invalid) && |
| (((mainHeader.signature << 32) == APM_SIGNATURE1) || |
| (mainHeader.signature << 32) == APM_SIGNATURE2)) { |
| apmFound = 1; // Will display warning message later |
| } // if |
| |
| return valid; |
| } // GPTData::CheckHeaderValidity() |
| |
| // Check the header CRC to see if it's OK... |
| // Note: Must be called BEFORE byte-order reversal on big-endian |
| // systems! |
| int GPTData::CheckHeaderCRC(struct GPTHeader* header) { |
| uint32_t oldCRC, newCRC; |
| |
| // Back up old header CRC and then blank it, since it must be 0 for |
| // computation to be valid |
| oldCRC = header->headerCRC; |
| if (IsLittleEndian() == 0) |
| ReverseBytes(&oldCRC, 4); |
| header->headerCRC = UINT32_C(0); |
| |
| // Initialize CRC functions... |
| chksum_crc32gentab(); |
| |
| // Compute CRC, restore original, and return result of comparison |
| newCRC = chksum_crc32((unsigned char*) header, HEADER_SIZE); |
| mainHeader.headerCRC = oldCRC; |
| return (oldCRC == newCRC); |
| } // GPTData::CheckHeaderCRC() |
| |
| // Recompute all the CRCs. Must be called before saving (but after reversing |
| // byte order on big-endian systems) if any changes have been made. |
| void GPTData::RecomputeCRCs(void) { |
| uint32_t crc; |
| uint32_t trueNumParts, crcTemp; |
| int littleEndian = 1; |
| |
| // Initialize CRC functions... |
| chksum_crc32gentab(); |
| |
| littleEndian = IsLittleEndian(); |
| |
| // Compute CRC of partition tables & store in main and secondary headers |
| trueNumParts = mainHeader.numParts; |
| if (littleEndian == 0) |
| ReverseBytes(&trueNumParts, 4); // unreverse this key piece of data.... |
| crc = chksum_crc32((unsigned char*) partitions, trueNumParts * GPT_SIZE); |
| mainHeader.partitionEntriesCRC = crc; |
| secondHeader.partitionEntriesCRC = crc; |
| if (littleEndian == 0) { |
| ReverseBytes(&mainHeader.partitionEntriesCRC, 4); |
| ReverseBytes(&secondHeader.partitionEntriesCRC, 4); |
| } // if |
| |
| // Zero out GPT tables' own CRCs (required for correct computation) |
| mainHeader.headerCRC = 0; |
| secondHeader.headerCRC = 0; |
| |
| // Compute & store CRCs of main & secondary headers... |
| crc = chksum_crc32((unsigned char*) &mainHeader, HEADER_SIZE); |
| if (littleEndian == 0) |
| ReverseBytes(&crc, 4); |
| mainHeader.headerCRC = crc; |
| crc = chksum_crc32((unsigned char*) &secondHeader, HEADER_SIZE); |
| if (littleEndian == 0) |
| ReverseBytes(&crc, 4); |
| secondHeader.headerCRC = crc; |
| } // GPTData::RecomputeCRCs() |
| |
| // Perform detailed verification, reporting on any problems found, but |
| // do *NOT* recover from these problems. Returns the total number of |
| // problems identified. |
| int GPTData::Verify(void) { |
| int problems = 0, numSegments, i, j; |
| uint64_t totalFree, largestSegment; |
| char tempStr[255], siTotal[255], siLargest[255]; |
| |
| // First, check for CRC errors in the GPT data.... |
| if (!mainCrcOk) { |
| problems++; |
| printf("\nProblem: The CRC for the main GPT header is invalid. The main GPT header may\n" |
| "be corrupt. Consider loading the backup GPT header to rebuild the main GPT\n" |
| "header\n"); |
| } // if |
| if (!mainPartsCrcOk) { |
| problems++; |
| printf("\nProblem: The CRC for the main partition table is invalid. This table may be\n" |
| "corrupt. Consider loading the backup partition table.\n"); |
| } // if |
| if (!secondCrcOk) { |
| problems++; |
| printf("\nProblem: The CRC for the backup GPT header is invalid. The backup GPT header\n" |
| "may be corrupt. Consider using the main GPT header to rebuild the backup GPT\n" |
| "header.\n"); |
| } // if |
| if (!secondPartsCrcOk) { |
| problems++; |
| printf("\nCaution: The CRC for the backup partition table is invalid. This table may\n" |
| "be corrupt. This program will automatically create a new backup partition\n" |
| "table when you save your partitions.\n"); |
| } // if |
| |
| // Now check that critical main and backup GPT entries match |
| if (mainHeader.currentLBA != secondHeader.backupLBA) { |
| problems++; |
| printf("\nProblem: main GPT header's current LBA pointer (%llu) doesn't\n" |
| "match the backup GPT header's LBA pointer(%llu)\n", |
| (unsigned long long) mainHeader.currentLBA, |
| (unsigned long long) secondHeader.backupLBA); |
| } // if |
| if (mainHeader.backupLBA != secondHeader.currentLBA) { |
| problems++; |
| printf("\nProblem: main GPT header's backup LBA pointer (%llu) doesn't\n" |
| "match the backup GPT header's current LBA pointer (%llu)\n", |
| (unsigned long long) mainHeader.backupLBA, |
| (unsigned long long) secondHeader.currentLBA); |
| } // if |
| if (mainHeader.firstUsableLBA != secondHeader.firstUsableLBA) { |
| problems++; |
| printf("\nProblem: main GPT header's first usable LBA pointer (%llu) doesn't\n" |
| "match the backup GPT header's first usable LBA pointer (%llu)\n", |
| (unsigned long long) mainHeader.firstUsableLBA, |
| (unsigned long long) secondHeader.firstUsableLBA); |
| } // if |
| if (mainHeader.lastUsableLBA != secondHeader.lastUsableLBA) { |
| problems++; |
| printf("\nProblem: main GPT header's last usable LBA pointer (%llu) doesn't\n" |
| "match the backup GPT header's last usable LBA pointer (%llu)\n", |
| (unsigned long long) mainHeader.lastUsableLBA, |
| (unsigned long long) secondHeader.lastUsableLBA); |
| } // if |
| if ((mainHeader.diskGUID.data1 != secondHeader.diskGUID.data1) || |
| (mainHeader.diskGUID.data2 != secondHeader.diskGUID.data2)) { |
| problems++; |
| printf("\nProblem: main header's disk GUID (%s) doesn't\n", |
| GUIDToStr(mainHeader.diskGUID, tempStr)); |
| printf("match the backup GPT header's disk GUID (%s)\n", |
| GUIDToStr(secondHeader.diskGUID, tempStr)); |
| } // if |
| if (mainHeader.numParts != secondHeader.numParts) { |
| problems++; |
| printf("\nProblem: main GPT header's number of partitions (%lu) doesn't\n" |
| "match the backup GPT header's number of partitions (%lu)\n", |
| (unsigned long) mainHeader.numParts, |
| (unsigned long) secondHeader.numParts); |
| } // if |
| if (mainHeader.sizeOfPartitionEntries != secondHeader.sizeOfPartitionEntries) { |
| problems++; |
| printf("\nProblem: main GPT header's size of partition entries (%lu) doesn't\n" |
| "match the backup GPT header's size of partition entries (%lu)\n", |
| (unsigned long) mainHeader.sizeOfPartitionEntries, |
| (unsigned long) secondHeader.sizeOfPartitionEntries); |
| } // if |
| |
| // Now check for a few other miscellaneous problems... |
| // Check that the disk size will hold the data... |
| if (mainHeader.backupLBA > diskSize) { |
| problems++; |
| printf("\nProblem: Disk is too small to hold all the data!\n"); |
| printf("(Disk size is %llu sectors, needs to be %llu sectors.)\n", |
| (unsigned long long) diskSize, |
| (unsigned long long) mainHeader.backupLBA); |
| } // if |
| |
| // Check for overlapping partitions.... |
| for (i = 1; i < mainHeader.numParts; i++) { |
| for (j = 0; j < i; j++) { |
| if (partitions[i].DoTheyOverlap(&partitions[j])) { |
| problems++; |
| printf("\nProblem: partitions %d and %d overlap:\n", i + 1, j + 1); |
| printf(" Partition %d: %llu to %llu\n", i, |
| (unsigned long long) partitions[i].GetFirstLBA(), |
| (unsigned long long) partitions[i].GetLastLBA()); |
| printf(" Partition %d: %llu to %llu\n", j, |
| (unsigned long long) partitions[j].GetFirstLBA(), |
| (unsigned long long) partitions[j].GetLastLBA()); |
| } // if |
| } // for j... |
| } // for i... |
| |
| // Verify that partitions don't run into GPT data areas.... |
| problems += CheckGPTSize(); |
| |
| // Now compute available space, but only if no problems found, since |
| // problems could affect the results |
| if (problems == 0) { |
| totalFree = FindFreeBlocks(&numSegments, &largestSegment); |
| BytesToSI(totalFree * (uint64_t) blockSize, siTotal); |
| BytesToSI(largestSegment * (uint64_t) blockSize, siLargest); |
| printf("No problems found. %llu free sectors (%s) available in %u\n" |
| "segments, the largest of which is %llu sectors (%s) in size\n", |
| (unsigned long long) totalFree, |
| siTotal, numSegments, (unsigned long long) largestSegment, |
| siLargest); |
| } else { |
| printf("\nIdentified %d problems!\n", problems); |
| } // if/else |
| |
| return (problems); |
| } // GPTData::Verify() |
| |
| // Rebuild the main GPT header, using the secondary header as a model. |
| // Typically called when the main header has been found to be corrupt. |
| void GPTData::RebuildMainHeader(void) { |
| int i; |
| |
| mainHeader.signature = GPT_SIGNATURE; |
| mainHeader.revision = secondHeader.revision; |
| mainHeader.headerSize = HEADER_SIZE; |
| mainHeader.headerCRC = UINT32_C(0); |
| mainHeader.reserved = secondHeader.reserved; |
| mainHeader.currentLBA = secondHeader.backupLBA; |
| mainHeader.backupLBA = secondHeader.currentLBA; |
| mainHeader.firstUsableLBA = secondHeader.firstUsableLBA; |
| mainHeader.lastUsableLBA = secondHeader.lastUsableLBA; |
| mainHeader.diskGUID.data1 = secondHeader.diskGUID.data1; |
| mainHeader.diskGUID.data2 = secondHeader.diskGUID.data2; |
| mainHeader.partitionEntriesLBA = UINT64_C(2); |
| mainHeader.numParts = secondHeader.numParts; |
| mainHeader.sizeOfPartitionEntries = secondHeader.sizeOfPartitionEntries; |
| mainHeader.partitionEntriesCRC = secondHeader.partitionEntriesCRC; |
| for (i = 0 ; i < GPT_RESERVED; i++) |
| mainHeader.reserved2[i] = secondHeader.reserved2[i]; |
| } // GPTData::RebuildMainHeader() |
| |
| // Rebuild the secondary GPT header, using the main header as a model. |
| void GPTData::RebuildSecondHeader(void) { |
| int i; |
| |
| secondHeader.signature = GPT_SIGNATURE; |
| secondHeader.revision = mainHeader.revision; |
| secondHeader.headerSize = HEADER_SIZE; |
| secondHeader.headerCRC = UINT32_C(0); |
| secondHeader.reserved = mainHeader.reserved; |
| secondHeader.currentLBA = mainHeader.backupLBA; |
| secondHeader.backupLBA = mainHeader.currentLBA; |
| secondHeader.firstUsableLBA = mainHeader.firstUsableLBA; |
| secondHeader.lastUsableLBA = mainHeader.lastUsableLBA; |
| secondHeader.diskGUID.data1 = mainHeader.diskGUID.data1; |
| secondHeader.diskGUID.data2 = mainHeader.diskGUID.data2; |
| secondHeader.partitionEntriesLBA = secondHeader.lastUsableLBA + UINT64_C(1); |
| secondHeader.numParts = mainHeader.numParts; |
| secondHeader.sizeOfPartitionEntries = mainHeader.sizeOfPartitionEntries; |
| secondHeader.partitionEntriesCRC = mainHeader.partitionEntriesCRC; |
| for (i = 0 ; i < GPT_RESERVED; i++) |
| secondHeader.reserved2[i] = mainHeader.reserved2[i]; |
| } // RebuildSecondHeader() |
| |
| // Load the second (backup) partition table as the primary partition |
| // table. Used in repair functions |
| void GPTData::LoadSecondTableAsMain(void) { |
| int fd; |
| off_t seekTo; |
| uint32_t sizeOfParts, newCRC; |
| |
| if ((fd = open(device, O_RDONLY)) != -1) { |
| seekTo = secondHeader.partitionEntriesLBA * (off_t) blockSize; |
| if (lseek64(fd, seekTo, SEEK_SET) != (off_t) -1) { |
| SetGPTSize(secondHeader.numParts); |
| sizeOfParts = secondHeader.numParts * secondHeader.sizeOfPartitionEntries; |
| read(fd, partitions, sizeOfParts); |
| newCRC = chksum_crc32((unsigned char*) partitions, sizeOfParts); |
| secondPartsCrcOk = (newCRC == secondHeader.partitionEntriesCRC); |
| mainPartsCrcOk = secondPartsCrcOk; |
| if (IsLittleEndian() == 0) |
| ReversePartitionBytes(); |
| if (!secondPartsCrcOk) { |
| printf("Error! After loading backup partitions, the CRC still doesn't check out!\n"); |
| } // if |
| } else { |
| printf("Error! Couldn't seek to backup partition table!\n"); |
| } // if/else |
| } else { |
| printf("Error! Couldn't open device %s when recovering backup partition table!\n"); |
| } // if/else |
| } // GPTData::LoadSecondTableAsMain() |
| |
| // Finds the total number of free blocks, the number of segments in which |
| // they reside, and the size of the largest of those segments |
| uint64_t GPTData::FindFreeBlocks(int *numSegments, uint64_t *largestSegment) { |
| uint64_t start = UINT64_C(0); // starting point for each search |
| uint64_t totalFound = UINT64_C(0); // running total |
| uint64_t firstBlock; // first block in a segment |
| uint64_t lastBlock; // last block in a segment |
| uint64_t segmentSize; // size of segment in blocks |
| int num = 0; |
| |
| *largestSegment = UINT64_C(0); |
| do { |
| firstBlock = FindFirstAvailable(start); |
| if (firstBlock != UINT64_C(0)) { // something's free... |
| lastBlock = FindLastInFree(firstBlock); |
| segmentSize = lastBlock - firstBlock + UINT64_C(1); |
| if (segmentSize > *largestSegment) { |
| *largestSegment = segmentSize; |
| } // if |
| totalFound += segmentSize; |
| num++; |
| start = lastBlock + 1; |
| } // if |
| } while (firstBlock != 0); |
| *numSegments = num; |
| return totalFound; |
| } // GPTData::FindFreeBlocks() |
| |
| // Create a hybrid MBR -- an ugly, funky thing that helps GPT work with |
| // OSes that don't understand GPT. |
| void GPTData::MakeHybrid(void) { |
| uint32_t partNums[3]; |
| char line[255]; |
| int numParts, i, j, typeCode, bootable, mbrNum; |
| uint64_t length; |
| char fillItUp = 'M'; // fill extra partition entries? (Yes/No/Maybe) |
| char eeFirst; // Whether EFI GPT (0xEE) partition comes first in table |
| |
| printf("\nWARNING! Hybrid MBRs are flaky and potentially dangerous! If you decide not\n" |
| "to use one, just hit the Enter key at the below prompt and your MBR\n" |
| "partition table will be untouched.\n\n\a"); |
| |
| // Now get the numbers of up to three partitions to add to the |
| // hybrid MBR.... |
| printf("Type from one to three GPT partition numbers, separated by spaces, to be\n" |
| "added to the hybrid MBR, in sequence: "); |
| fgets(line, 255, stdin); |
| numParts = sscanf(line, "%d %d %d", &partNums[0], &partNums[1], &partNums[2]); |
| |
| if (numParts > 0) { |
| // Blank out the protective MBR, but leave the boot loader code |
| // alone.... |
| protectiveMBR.EmptyMBR(0); |
| protectiveMBR.SetDiskSize(diskSize); |
| printf("Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? "); |
| eeFirst = GetYN(); |
| } // if |
| |
| for (i = 0; i < numParts; i++) { |
| j = partNums[i] - 1; |
| printf("\nCreating entry for partition #%d\n", j + 1); |
| if ((j >= 0) && (j < mainHeader.numParts)) { |
| if (partitions[j].GetLastLBA() < UINT32_MAX) { |
| do { |
| printf("Enter an MBR hex code (default %02X): ", |
| typeHelper.GUIDToID(partitions[j].GetType()) / 256); |
| fgets(line, 255, stdin); |
| sscanf(line, "%x", &typeCode); |
| if (line[0] == '\n') |
| typeCode = partitions[j].GetHexType() / 256; |
| } while ((typeCode <= 0) || (typeCode > 255)); |
| printf("Set the bootable flag? "); |
| bootable = (GetYN() == 'Y'); |
| length = partitions[j].GetLengthLBA(); |
| if (eeFirst == 'Y') |
| mbrNum = i + 1; |
| else |
| mbrNum = i; |
| protectiveMBR.MakePart(mbrNum, (uint32_t) partitions[j].GetFirstLBA(), |
| (uint32_t) length, typeCode, bootable); |
| } else { // partition out of range |
| printf("Partition %d ends beyond the 2TiB limit of MBR partitions; omitting it.\n", |
| j + 1); |
| } // if/else |
| } else { |
| printf("Partition %d is out of range; omitting it.\n", j + 1); |
| } // if/else |
| } // for |
| |
| if (numParts > 0) { // User opted to create a hybrid MBR.... |
| // Create EFI protective partition that covers the start of the disk. |
| // If this location (covering the main GPT data structures) is omitted, |
| // Linux won't find any partitions on the disk. Note that this is |
| // NUMBERED AFTER the hybrid partitions, contrary to what the |
| // gptsync utility does. This is because Windows seems to choke on |
| // disks with a 0xEE partition in the first slot and subsequent |
| // additional partitions, unless it boots from the disk. |
| if (eeFirst == 'Y') |
| mbrNum = 0; |
| else |
| mbrNum = numParts; |
| protectiveMBR.MakePart(mbrNum, 1, protectiveMBR.FindLastInFree(1), 0xEE); |
| |
| // ... and for good measure, if there are any partition spaces left, |
| // optionally create more protective EFI partitions to cover as much |
| // space as possible.... |
| for (i = 0; i < 4; i++) { |
| if (protectiveMBR.GetType(i) == 0x00) { // unused entry.... |
| if (fillItUp == 'M') { |
| printf("\nUnused partition space(s) found. Use one to protect more partitions? "); |
| fillItUp = GetYN(); |
| typeCode = 0x00; // use this to flag a need to get type code |
| } // if |
| if (fillItUp == 'Y') { |
| while ((typeCode <= 0) || (typeCode > 255)) { |
| printf("Enter an MBR hex code (EE is EFI GPT, but may confuse MacOS): "); |
| // Comment on above: Mac OS treats disks with more than one |
| // 0xEE MBR partition as MBR disks, not as GPT disks. |
| fgets(line, 255, stdin); |
| sscanf(line, "%x", &typeCode); |
| if (line[0] == '\n') |
| typeCode = 0; |
| } // while |
| protectiveMBR.MakeBiggestPart(i, typeCode); // make a partition |
| } // if (fillItUp == 'Y') |
| } // if unused entry |
| } // for (i = 0; i < 4; i++) |
| } // if (numParts > 0) |
| } // GPTData::MakeHybrid() |
| |
| // Create a fresh protective MBR. |
| void GPTData::MakeProtectiveMBR(void) { |
| protectiveMBR.MakeProtectiveMBR(); |
| } // GPTData::MakeProtectiveMBR(void) |
| |
| // Writes GPT (and protective MBR) to disk. Returns 1 on successful |
| // write, 0 if there was a problem. |
| int GPTData::SaveGPTData(void) { |
| int allOK = 1, i, j; |
| char answer, line[256]; |
| int fd; |
| uint64_t secondTable; |
| uint32_t numParts; |
| off_t offset; |
| |
| if (strlen(device) == 0) { |
| printf("Device not defined.\n"); |
| } // if |
| |
| // First do some final sanity checks.... |
| // Is there enough space to hold the GPT headers and partition tables, |
| // given the partition sizes? |
| if (CheckGPTSize() > 0) { |
| allOK = 0; |
| } // if |
| |
| // Check that disk is really big enough to handle this... |
| if (mainHeader.backupLBA > diskSize) { |
| fprintf(stderr, "Error! Disk is too small -- either the original MBR is corrupt or you're\n"); |
| fprintf(stderr, "working from an MBR copied to a file! Aborting!\n"); |
| printf("(Disk size is %ld sectors, needs to be %ld sectors.)\n", diskSize, |
| mainHeader.backupLBA); |
| allOK = 0; |
| } // if |
| |
| // Check for overlapping partitions.... |
| for (i = 1; i < mainHeader.numParts; i++) { |
| for (j = 0; j < i; j++) { |
| if (partitions[i].DoTheyOverlap(&partitions[j])) { |
| fprintf(stderr, "\Error: partitions %d and %d overlap:\n", i + 1, j + 1); |
| fprintf(stderr, " Partition %d: %llu to %llu\n", i, |
| (unsigned long long) partitions[i].GetFirstLBA(), |
| (unsigned long long) partitions[i].GetLastLBA()); |
| fprintf(stderr, " Partition %d: %llu to %llu\n", j, |
| (unsigned long long) partitions[j].GetFirstLBA(), |
| (unsigned long long) partitions[j].GetLastLBA()); |
| fprintf(stderr, "Aborting write operation!\n"); |
| allOK = 0; |
| } // if |
| } // for j... |
| } // for i... |
| |
| // Pull out some data that's needed before doing byte-order reversal on |
| // big-endian systems.... |
| numParts = mainHeader.numParts; |
| secondTable = secondHeader.partitionEntriesLBA; |
| if (IsLittleEndian() == 0) { |
| // Reverse partition bytes first, since that function requires non-reversed |
| // data from the main header.... |
| ReversePartitionBytes(); |
| ReverseHeaderBytes(&mainHeader); |
| ReverseHeaderBytes(&secondHeader); |
| } // if |
| RecomputeCRCs(); |
| |
| if (allOK) { |
| printf("\nFinal checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING\n"); |
| printf("MBR PARTITIONS!! THIS PROGRAM IS BETA QUALITY AT BEST. IF YOU LOSE ALL YOUR\n"); |
| printf("DATA, YOU HAVE ONLY YOURSELF TO BLAME IF YOU ANSWER 'Y' BELOW!\n\n"); |
| printf("Do you want to proceed, possibly destroying your data? (Y/N) "); |
| fgets(line, 255, stdin); |
| sscanf(line, "%c", &answer); |
| if ((answer == 'Y') || (answer == 'y')) { |
| printf("OK; writing new GPT partition table.\n"); |
| } else { |
| allOK = 0; |
| } // if/else |
| } // if |
| |
| // Do it! |
| if (allOK) { |
| fd = open(device, O_WRONLY); // try to open the device; may fail.... |
| #ifdef __APPLE__ |
| // MacOS X requires a shared lock under some circumstances.... |
| if (fd < 0) { |
| fd = open(device, O_WRONLY|O_SHLOCK); |
| } // if |
| #endif |
| if (fd != -1) { |
| // First, write the protective MBR... |
| protectiveMBR.WriteMBRData(fd); |
| |
| // Now write the main GPT header... |
| if (allOK) |
| if (write(fd, &mainHeader, 512) == -1) |
| allOK = 0; |
| |
| // Now write the main partition tables... |
| if (allOK) { |
| if (write(fd, partitions, GPT_SIZE * numParts) == -1) |
| allOK = 0; |
| } // if |
| |
| // Now seek to near the end to write the secondary GPT.... |
| if (allOK) { |
| offset = (off_t) secondTable * (off_t) (blockSize); |
| if (lseek64(fd, offset, SEEK_SET) == (off_t) - 1) { |
| allOK = 0; |
| printf("Unable to seek to end of disk!\n"); |
| } // if |
| } // if |
| |
| // Now write the secondary partition tables.... |
| if (allOK) |
| if (write(fd, partitions, GPT_SIZE * numParts) == -1) |
| allOK = 0; |
| |
| // Now write the secondary GPT header... |
| if (allOK) |
| if (write(fd, &secondHeader, 512) == -1) |
| allOK = 0; |
| |
| // re-read the partition table |
| if (allOK) { |
| sync(); |
| #ifdef __APPLE__ |
| printf("Warning: The kernel may continue to use old or deleted partitions.\n" |
| "You should reboot or remove the drive.\n"); |
| /* don't know if this helps |
| * it definitely will get things on disk though: |
| * http://topiks.org/mac-os-x/0321278542/ch12lev1sec8.html */ |
| i = ioctl(fd, DKIOCSYNCHRONIZECACHE); |
| #else |
| #ifdef __FreeBSD__ |
| sleep(2); |
| i = ioctl(fd, DIOCGFLUSH); |
| printf("Warning: The kernel is still using the old partition table.\n"); |
| #else |
| sleep(2); |
| i = ioctl(fd, BLKRRPART); |
| if (i) |
| printf("Warning: The kernel is still using the old partition table.\n" |
| "The new table will be used at the next reboot.\n"); |
| #endif |
| #endif |
| } // if |
| |
| if (allOK) { // writes completed OK |
| printf("The operation has completed successfully.\n"); |
| } else { |
| printf("Warning! An error was reported when writing the partition table! This error\n"); |
| printf("MIGHT be harmless, but you may have trashed the disk! Use parted and, if\n"); |
| printf("necessary, restore your original partition table.\n"); |
| } // if/else |
| close(fd); |
| } else { |
| fprintf(stderr, "Unable to open device %s for writing! Errno is %d! Aborting!\n", device, errno); |
| allOK = 0; |
| } // if/else |
| } else { |
| printf("Aborting write of new partition table.\n"); |
| } // if |
| |
| if (IsLittleEndian() == 0) { |
| // Reverse (normalize) header bytes first, since ReversePartitionBytes() |
| // requires non-reversed data in mainHeader... |
| ReverseHeaderBytes(&mainHeader); |
| ReverseHeaderBytes(&secondHeader); |
| ReversePartitionBytes(); |
| } // if |
| |
| return (allOK); |
| } // GPTData::SaveGPTData() |
| |
| // Save GPT data to a backup file. This function does much less error |
| // checking than SaveGPTData(). It can therefore preserve many types of |
| // corruption for later analysis; however, it preserves only the MBR, |
| // the main GPT header, the backup GPT header, and the main partition |
| // table; it discards the backup partition table, since it should be |
| // identical to the main partition table on healthy disks. |
| int GPTData::SaveGPTBackup(char* filename) { |
| int fd, allOK = 1; |
| uint32_t numParts; |
| |
| if ((fd = open(filename, O_WRONLY | O_CREAT, S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH)) != -1) { |
| // Reverse the byte order, if necessary.... |
| numParts = mainHeader.numParts; |
| if (IsLittleEndian() == 0) { |
| ReversePartitionBytes(); |
| ReverseHeaderBytes(&mainHeader); |
| ReverseHeaderBytes(&secondHeader); |
| } // if |
| |
| // Now write the protective MBR... |
| protectiveMBR.WriteMBRData(fd); |
| |
| // Now write the main GPT header... |
| if (allOK) |
| if (write(fd, &mainHeader, 512) == -1) |
| allOK = 0; |
| |
| // Now write the secondary GPT header... |
| if (allOK) |
| if (write(fd, &secondHeader, 512) == -1) |
| allOK = 0; |
| |
| // Now write the main partition tables... |
| if (allOK) { |
| if (write(fd, partitions, GPT_SIZE * numParts) == -1) |
| allOK = 0; |
| } // if |
| |
| if (allOK) { // writes completed OK |
| printf("The operation has completed successfully.\n"); |
| } else { |
| printf("Warning! An error was reported when writing the backup file.\n"); |
| printf("It may not be useable!\n"); |
| } // if/else |
| close(fd); |
| |
| // Now reverse the byte-order reversal, if necessary.... |
| if (IsLittleEndian() == 0) { |
| ReverseHeaderBytes(&mainHeader); |
| ReverseHeaderBytes(&secondHeader); |
| ReversePartitionBytes(); |
| } // if |
| } else { |
| fprintf(stderr, "Unable to open file %s for writing! Aborting!\n", filename); |
| allOK = 0; |
| } // if/else |
| return allOK; |
| } // GPTData::SaveGPTBackup() |
| |
| // Load GPT data from a backup file created by SaveGPTBackup(). This function |
| // does minimal error checking. It returns 1 if it completed successfully, |
| // 0 if there was a problem. In the latter case, it creates a new empty |
| // set of partitions. |
| int GPTData::LoadGPTBackup(char* filename) { |
| int fd, allOK = 1, val; |
| uint32_t numParts, sizeOfEntries, sizeOfParts, newCRC; |
| int littleEndian = 1; |
| |
| if ((fd = open(filename, O_RDONLY)) != -1) { |
| if (IsLittleEndian() == 0) |
| littleEndian = 0; |
| |
| // Let the MBRData class load the saved MBR... |
| protectiveMBR.ReadMBRData(fd, 0); // 0 = don't check block size |
| |
| // Load the main GPT header, check its vaility, and set the GPT |
| // size based on the data |
| read(fd, &mainHeader, 512); |
| mainCrcOk = CheckHeaderCRC(&mainHeader); |
| |
| // Reverse byte order, if necessary |
| if (littleEndian == 0) { |
| ReverseHeaderBytes(&mainHeader); |
| } // if |
| |
| // Load the backup GPT header in much the same way as the main |
| // GPT header.... |
| read(fd, &secondHeader, 512); |
| secondCrcOk = CheckHeaderCRC(&secondHeader); |
| |
| // Reverse byte order, if necessary |
| if (littleEndian == 0) { |
| ReverseHeaderBytes(&secondHeader); |
| } // if |
| |
| // Return valid headers code: 0 = both headers bad; 1 = main header |
| // good, backup bad; 2 = backup header good, main header bad; |
| // 3 = both headers good. Note these codes refer to valid GPT |
| // signatures and version numbers; more subtle problems will elude |
| // this check! |
| if ((val = CheckHeaderValidity()) > 0) { |
| if (val == 2) { // only backup header seems to be good |
| numParts = secondHeader.numParts; |
| sizeOfEntries = secondHeader.sizeOfPartitionEntries; |
| } else { // main header is OK |
| numParts = mainHeader.numParts; |
| sizeOfEntries = mainHeader.sizeOfPartitionEntries; |
| } // if/else |
| |
| SetGPTSize(numParts); |
| |
| // If current disk size doesn't match that of backup.... |
| if (secondHeader.currentLBA != diskSize - UINT64_C(1)) { |
| printf("Warning! Current disk size doesn't match that of the backup!\n" |
| "Adjusting sizes to match, but subsequent problems are possible!\n"); |
| secondHeader.currentLBA = mainHeader.backupLBA = diskSize - UINT64_C(1); |
| mainHeader.lastUsableLBA = diskSize - mainHeader.firstUsableLBA; |
| secondHeader.lastUsableLBA = mainHeader.lastUsableLBA; |
| secondHeader.partitionEntriesLBA = secondHeader.lastUsableLBA + UINT64_C(1); |
| } // if |
| |
| // Load main partition table, and record whether its CRC |
| // matches the stored value |
| sizeOfParts = numParts * sizeOfEntries; |
| read(fd, partitions, sizeOfParts); |
| |
| newCRC = chksum_crc32((unsigned char*) partitions, sizeOfParts); |
| mainPartsCrcOk = (newCRC == mainHeader.partitionEntriesCRC); |
| secondPartsCrcOk = (newCRC == secondHeader.partitionEntriesCRC); |
| // Reverse byte order, if necessary |
| if (littleEndian == 0) { |
| ReversePartitionBytes(); |
| } // if |
| |
| } else { |
| allOK = 0; |
| } // if/else |
| } else { |
| allOK = 0; |
| fprintf(stderr, "Unable to open file %s for reading! Aborting!\n", filename); |
| } // if/else |
| |
| // Something went badly wrong, so blank out partitions |
| if (allOK == 0) { |
| ClearGPTData(); |
| protectiveMBR.MakeProtectiveMBR(); |
| } // if |
| return allOK; |
| } // GPTData::LoadGPTBackup() |
| |
| // This function destroys the on-disk GPT structures. Returns 1 if the |
| // user confirms destruction, 0 if the user aborts. |
| int GPTData::DestroyGPT(void) { |
| int fd, i, doMore; |
| char blankSector[512], goOn; |
| |
| for (i = 0; i < 512; i++) { |
| blankSector[i] = '\0'; |
| } // for |
| |
| printf("\a\aAbout to wipe out GPT on %s. Proceed? ", device); |
| goOn = GetYN(); |
| if (goOn == 'Y') { |
| fd = open(device, O_WRONLY); |
| #ifdef __APPLE__ |
| // MacOS X requires a shared lock under some circumstances.... |
| if (fd < 0) { |
| fd = open(device, O_WRONLY|O_SHLOCK); |
| } // if |
| #endif |
| if (fd != -1) { |
| lseek64(fd, mainHeader.currentLBA * 512, SEEK_SET); // seek to GPT header |
| write(fd, blankSector, 512); // blank it out |
| lseek64(fd, mainHeader.partitionEntriesLBA * 512, SEEK_SET); // seek to partition table |
| for (i = 0; i < GetBlocksInPartTable(); i++) |
| write(fd, blankSector, 512); |
| lseek64(fd, secondHeader.partitionEntriesLBA * 512, SEEK_SET); // seek to partition table |
| for (i = 0; i < GetBlocksInPartTable(); i++) |
| write(fd, blankSector, 512); |
| lseek64(fd, secondHeader.currentLBA * 512, SEEK_SET); // seek to GPT header |
| write(fd, blankSector, 512); // blank it out |
| printf("Blank out MBR? "); |
| if (GetYN() == 'Y') { |
| lseek64(fd, 0, SEEK_SET); |
| write(fd, blankSector, 512); // blank it out |
| } // if blank MBR |
| close(fd); |
| printf("GPT data structures destroyed! You may now partition the disk using fdisk or\n" |
| "other utilities. Program will now terminate.\n"); |
| } else { |
| printf("Problem opening %s for writing! Program will now terminate.\n"); |
| } // if/else (fd != -1) |
| } // if (goOn == 'Y') |
| return (goOn == 'Y'); |
| } // GPTData::DestroyGPT() |
| |
| void GPTData::ReverseHeaderBytes(struct GPTHeader* header) { |
| ReverseBytes(&header->signature, 8); |
| ReverseBytes(&header->revision, 4); |
| ReverseBytes(&header->headerSize, 4); |
| ReverseBytes(&header->headerCRC, 4); |
| ReverseBytes(&header->reserved, 4); |
| ReverseBytes(&header->currentLBA, 8); |
| ReverseBytes(&header->backupLBA, 8); |
| ReverseBytes(&header->firstUsableLBA, 8); |
| ReverseBytes(&header->lastUsableLBA, 8); |
| ReverseBytes(&header->partitionEntriesLBA, 8); |
| ReverseBytes(&header->numParts, 4); |
| ReverseBytes(&header->sizeOfPartitionEntries, 4); |
| ReverseBytes(&header->partitionEntriesCRC, 4); |
| ReverseBytes(&header->reserved2, GPT_RESERVED); |
| ReverseBytes(&header->diskGUID.data1, 8); |
| ReverseBytes(&header->diskGUID.data2, 8); |
| } // GPTData::ReverseHeaderBytes() |
| |
| // IMPORTANT NOTE: This function requires non-reversed mainHeader |
| // structure! |
| void GPTData::ReversePartitionBytes() { |
| uint32_t i; |
| |
| // Check GPT signature on big-endian systems; this will mismatch |
| // if the function is called out of order. Unfortunately, it'll also |
| // mismatch if there's data corruption. |
| if ((mainHeader.signature != GPT_SIGNATURE) && (IsLittleEndian() == 0)) { |
| printf("GPT signature mismatch in GPTData::ReversePartitionBytes(). This indicates\n" |
| "data corruption or a misplaced call to this function.\n"); |
| } // if signature mismatch.... |
| for (i = 0; i < mainHeader.numParts; i++) { |
| partitions[i].ReversePartBytes(); |
| } // for |
| } // GPTData::ReversePartitionBytes() |
| |
| /****************************************** |
| * * |
| * Additional non-class support functions * |
| * * |
| ******************************************/ |
| |
| // Check to be sure that data type sizes are correct. The basic types (uint*_t) should |
| // never fail these tests, but the struct types may fail depending on compile options. |
| // Specifically, the -fpack-struct option to gcc may be required to ensure proper structure |
| // sizes. |
| int SizesOK(void) { |
| int allOK = 1; |
| |
| if (sizeof(uint8_t) != 1) { |
| fprintf(stderr, "uint8_t is %d bytes, should be 1 byte; aborting!\n", sizeof(uint8_t)); |
| allOK = 0; |
| } // if |
| if (sizeof(uint16_t) != 2) { |
| fprintf(stderr, "uint16_t is %d bytes, should be 2 bytes; aborting!\n", sizeof(uint16_t)); |
| allOK = 0; |
| } // if |
| if (sizeof(uint32_t) != 4) { |
| fprintf(stderr, "uint32_t is %d bytes, should be 4 bytes; aborting!\n", sizeof(uint32_t)); |
| allOK = 0; |
| } // if |
| if (sizeof(uint64_t) != 8) { |
| fprintf(stderr, "uint64_t is %d bytes, should be 8 bytes; aborting!\n", sizeof(uint64_t)); |
| allOK = 0; |
| } // if |
| if (sizeof(struct MBRRecord) != 16) { |
| fprintf(stderr, "MBRRecord is %d bytes, should be 16 bytes; aborting!\n", sizeof(MBRRecord)); |
| allOK = 0; |
| } // if |
| if (sizeof(struct EBRRecord) != 512) { |
| fprintf(stderr, "EBRRecord is %d bytes, should be 512 bytes; aborting!\n", sizeof(EBRRecord)); |
| allOK = 0; |
| } // if |
| if (sizeof(struct GPTHeader) != 512) { |
| fprintf(stderr, "GPTHeader is %d bytes, should be 512 bytes; aborting!\n", sizeof(GPTHeader)); |
| allOK = 0; |
| } // if |
| if (sizeof(GPTPart) != 128) { |
| fprintf(stderr, "GPTPart is %d bytes, should be 128 bytes; aborting!\n", sizeof(GPTPart)); |
| allOK = 0; |
| } // if |
| // Determine endianness; set allOK = 0 if running on big-endian hardware |
| if (IsLittleEndian() == 0) { |
| fprintf(stderr, "\aRunning on big-endian hardware. Big-endian support is new and poorly" |
| " tested!\nBeware!\n"); |
| // allOK = 0; |
| } // if |
| return (allOK); |
| } // SizesOK() |