| // |
| // Copyright 2016 gRPC authors. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| |
| #include "src/core/ext/filters/deadline/deadline_filter.h" |
| |
| #include <stdbool.h> |
| #include <string.h> |
| |
| #include <grpc/support/alloc.h> |
| #include <grpc/support/log.h> |
| #include <grpc/support/sync.h> |
| #include <grpc/support/time.h> |
| |
| #include "src/core/lib/channel/channel_stack_builder.h" |
| #include "src/core/lib/iomgr/exec_ctx.h" |
| #include "src/core/lib/iomgr/timer.h" |
| #include "src/core/lib/slice/slice_internal.h" |
| #include "src/core/lib/surface/channel_init.h" |
| |
| // |
| // grpc_deadline_state |
| // |
| |
| // The on_complete callback used when sending a cancel_error batch down the |
| // filter stack. Yields the call combiner when the batch returns. |
| static void yield_call_combiner(grpc_exec_ctx* exec_ctx, void* arg, |
| grpc_error* ignored) { |
| grpc_deadline_state* deadline_state = (grpc_deadline_state*)arg; |
| GRPC_CALL_COMBINER_STOP(exec_ctx, deadline_state->call_combiner, |
| "got on_complete from cancel_stream batch"); |
| GRPC_CALL_STACK_UNREF(exec_ctx, deadline_state->call_stack, "deadline_timer"); |
| } |
| |
| // This is called via the call combiner, so access to deadline_state is |
| // synchronized. |
| static void send_cancel_op_in_call_combiner(grpc_exec_ctx* exec_ctx, void* arg, |
| grpc_error* error) { |
| grpc_call_element* elem = (grpc_call_element*)arg; |
| grpc_deadline_state* deadline_state = (grpc_deadline_state*)elem->call_data; |
| grpc_transport_stream_op_batch* batch = grpc_make_transport_stream_op( |
| GRPC_CLOSURE_INIT(&deadline_state->timer_callback, yield_call_combiner, |
| deadline_state, grpc_schedule_on_exec_ctx)); |
| batch->cancel_stream = true; |
| batch->payload->cancel_stream.cancel_error = GRPC_ERROR_REF(error); |
| elem->filter->start_transport_stream_op_batch(exec_ctx, elem, batch); |
| } |
| |
| // Timer callback. |
| static void timer_callback(grpc_exec_ctx* exec_ctx, void* arg, |
| grpc_error* error) { |
| grpc_call_element* elem = (grpc_call_element*)arg; |
| grpc_deadline_state* deadline_state = (grpc_deadline_state*)elem->call_data; |
| if (error != GRPC_ERROR_CANCELLED) { |
| error = grpc_error_set_int( |
| GRPC_ERROR_CREATE_FROM_STATIC_STRING("Deadline Exceeded"), |
| GRPC_ERROR_INT_GRPC_STATUS, GRPC_STATUS_DEADLINE_EXCEEDED); |
| grpc_call_combiner_cancel(exec_ctx, deadline_state->call_combiner, |
| GRPC_ERROR_REF(error)); |
| GRPC_CLOSURE_INIT(&deadline_state->timer_callback, |
| send_cancel_op_in_call_combiner, elem, |
| grpc_schedule_on_exec_ctx); |
| GRPC_CALL_COMBINER_START(exec_ctx, deadline_state->call_combiner, |
| &deadline_state->timer_callback, error, |
| "deadline exceeded -- sending cancel_stream op"); |
| } else { |
| GRPC_CALL_STACK_UNREF(exec_ctx, deadline_state->call_stack, |
| "deadline_timer"); |
| } |
| } |
| |
| // Starts the deadline timer. |
| // This is called via the call combiner, so access to deadline_state is |
| // synchronized. |
| static void start_timer_if_needed(grpc_exec_ctx* exec_ctx, |
| grpc_call_element* elem, |
| gpr_timespec deadline) { |
| deadline = gpr_convert_clock_type(deadline, GPR_CLOCK_MONOTONIC); |
| if (gpr_time_cmp(deadline, gpr_inf_future(GPR_CLOCK_MONOTONIC)) == 0) { |
| return; |
| } |
| grpc_deadline_state* deadline_state = (grpc_deadline_state*)elem->call_data; |
| grpc_closure* closure = NULL; |
| switch (deadline_state->timer_state) { |
| case GRPC_DEADLINE_STATE_PENDING: |
| // Note: We do not start the timer if there is already a timer |
| return; |
| case GRPC_DEADLINE_STATE_FINISHED: |
| deadline_state->timer_state = GRPC_DEADLINE_STATE_PENDING; |
| // If we've already created and destroyed a timer, we always create a |
| // new closure: we have no other guarantee that the inlined closure is |
| // not in use (it may hold a pending call to timer_callback) |
| closure = |
| GRPC_CLOSURE_CREATE(timer_callback, elem, grpc_schedule_on_exec_ctx); |
| break; |
| case GRPC_DEADLINE_STATE_INITIAL: |
| deadline_state->timer_state = GRPC_DEADLINE_STATE_PENDING; |
| closure = |
| GRPC_CLOSURE_INIT(&deadline_state->timer_callback, timer_callback, |
| elem, grpc_schedule_on_exec_ctx); |
| break; |
| } |
| GPR_ASSERT(closure != NULL); |
| GRPC_CALL_STACK_REF(deadline_state->call_stack, "deadline_timer"); |
| grpc_timer_init(exec_ctx, &deadline_state->timer, deadline, closure, |
| gpr_now(GPR_CLOCK_MONOTONIC)); |
| } |
| |
| // Cancels the deadline timer. |
| // This is called via the call combiner, so access to deadline_state is |
| // synchronized. |
| static void cancel_timer_if_needed(grpc_exec_ctx* exec_ctx, |
| grpc_deadline_state* deadline_state) { |
| if (deadline_state->timer_state == GRPC_DEADLINE_STATE_PENDING) { |
| deadline_state->timer_state = GRPC_DEADLINE_STATE_FINISHED; |
| grpc_timer_cancel(exec_ctx, &deadline_state->timer); |
| } else { |
| // timer was either in STATE_INITAL (nothing to cancel) |
| // OR in STATE_FINISHED (again nothing to cancel) |
| } |
| } |
| |
| // Callback run when the call is complete. |
| static void on_complete(grpc_exec_ctx* exec_ctx, void* arg, grpc_error* error) { |
| grpc_deadline_state* deadline_state = (grpc_deadline_state*)arg; |
| cancel_timer_if_needed(exec_ctx, deadline_state); |
| // Invoke the next callback. |
| GRPC_CLOSURE_RUN(exec_ctx, deadline_state->next_on_complete, |
| GRPC_ERROR_REF(error)); |
| } |
| |
| // Inject our own on_complete callback into op. |
| static void inject_on_complete_cb(grpc_deadline_state* deadline_state, |
| grpc_transport_stream_op_batch* op) { |
| deadline_state->next_on_complete = op->on_complete; |
| GRPC_CLOSURE_INIT(&deadline_state->on_complete, on_complete, deadline_state, |
| grpc_schedule_on_exec_ctx); |
| op->on_complete = &deadline_state->on_complete; |
| } |
| |
| // Callback and associated state for starting the timer after call stack |
| // initialization has been completed. |
| struct start_timer_after_init_state { |
| bool in_call_combiner; |
| grpc_call_element* elem; |
| gpr_timespec deadline; |
| grpc_closure closure; |
| }; |
| static void start_timer_after_init(grpc_exec_ctx* exec_ctx, void* arg, |
| grpc_error* error) { |
| struct start_timer_after_init_state* state = |
| (struct start_timer_after_init_state*)arg; |
| grpc_deadline_state* deadline_state = |
| (grpc_deadline_state*)state->elem->call_data; |
| if (!state->in_call_combiner) { |
| // We are initially called without holding the call combiner, so we |
| // need to bounce ourselves into it. |
| state->in_call_combiner = true; |
| GRPC_CALL_COMBINER_START(exec_ctx, deadline_state->call_combiner, |
| &state->closure, GRPC_ERROR_REF(error), |
| "scheduling deadline timer"); |
| return; |
| } |
| start_timer_if_needed(exec_ctx, state->elem, state->deadline); |
| gpr_free(state); |
| GRPC_CALL_COMBINER_STOP(exec_ctx, deadline_state->call_combiner, |
| "done scheduling deadline timer"); |
| } |
| |
| void grpc_deadline_state_init(grpc_exec_ctx* exec_ctx, grpc_call_element* elem, |
| grpc_call_stack* call_stack, |
| grpc_call_combiner* call_combiner, |
| gpr_timespec deadline) { |
| grpc_deadline_state* deadline_state = (grpc_deadline_state*)elem->call_data; |
| deadline_state->call_stack = call_stack; |
| deadline_state->call_combiner = call_combiner; |
| // Deadline will always be infinite on servers, so the timer will only be |
| // set on clients with a finite deadline. |
| deadline = gpr_convert_clock_type(deadline, GPR_CLOCK_MONOTONIC); |
| if (gpr_time_cmp(deadline, gpr_inf_future(GPR_CLOCK_MONOTONIC)) != 0) { |
| // When the deadline passes, we indicate the failure by sending down |
| // an op with cancel_error set. However, we can't send down any ops |
| // until after the call stack is fully initialized. If we start the |
| // timer here, we have no guarantee that the timer won't pop before |
| // call stack initialization is finished. To avoid that problem, we |
| // create a closure to start the timer, and we schedule that closure |
| // to be run after call stack initialization is done. |
| struct start_timer_after_init_state* state = |
| (struct start_timer_after_init_state*)gpr_zalloc(sizeof(*state)); |
| state->elem = elem; |
| state->deadline = deadline; |
| GRPC_CLOSURE_INIT(&state->closure, start_timer_after_init, state, |
| grpc_schedule_on_exec_ctx); |
| GRPC_CLOSURE_SCHED(exec_ctx, &state->closure, GRPC_ERROR_NONE); |
| } |
| } |
| |
| void grpc_deadline_state_destroy(grpc_exec_ctx* exec_ctx, |
| grpc_call_element* elem) { |
| grpc_deadline_state* deadline_state = (grpc_deadline_state*)elem->call_data; |
| cancel_timer_if_needed(exec_ctx, deadline_state); |
| } |
| |
| void grpc_deadline_state_reset(grpc_exec_ctx* exec_ctx, grpc_call_element* elem, |
| gpr_timespec new_deadline) { |
| grpc_deadline_state* deadline_state = (grpc_deadline_state*)elem->call_data; |
| cancel_timer_if_needed(exec_ctx, deadline_state); |
| start_timer_if_needed(exec_ctx, elem, new_deadline); |
| } |
| |
| void grpc_deadline_state_client_start_transport_stream_op_batch( |
| grpc_exec_ctx* exec_ctx, grpc_call_element* elem, |
| grpc_transport_stream_op_batch* op) { |
| grpc_deadline_state* deadline_state = (grpc_deadline_state*)elem->call_data; |
| if (op->cancel_stream) { |
| cancel_timer_if_needed(exec_ctx, deadline_state); |
| } else { |
| // Make sure we know when the call is complete, so that we can cancel |
| // the timer. |
| if (op->recv_trailing_metadata) { |
| inject_on_complete_cb(deadline_state, op); |
| } |
| } |
| } |
| |
| // |
| // filter code |
| // |
| |
| // Constructor for channel_data. Used for both client and server filters. |
| static grpc_error* init_channel_elem(grpc_exec_ctx* exec_ctx, |
| grpc_channel_element* elem, |
| grpc_channel_element_args* args) { |
| GPR_ASSERT(!args->is_last); |
| return GRPC_ERROR_NONE; |
| } |
| |
| // Destructor for channel_data. Used for both client and server filters. |
| static void destroy_channel_elem(grpc_exec_ctx* exec_ctx, |
| grpc_channel_element* elem) {} |
| |
| // Call data used for both client and server filter. |
| typedef struct base_call_data { |
| grpc_deadline_state deadline_state; |
| } base_call_data; |
| |
| // Additional call data used only for the server filter. |
| typedef struct server_call_data { |
| base_call_data base; // Must be first. |
| // The closure for receiving initial metadata. |
| grpc_closure recv_initial_metadata_ready; |
| // Received initial metadata batch. |
| grpc_metadata_batch* recv_initial_metadata; |
| // The original recv_initial_metadata_ready closure, which we chain to |
| // after our own closure is invoked. |
| grpc_closure* next_recv_initial_metadata_ready; |
| } server_call_data; |
| |
| // Constructor for call_data. Used for both client and server filters. |
| static grpc_error* init_call_elem(grpc_exec_ctx* exec_ctx, |
| grpc_call_element* elem, |
| const grpc_call_element_args* args) { |
| grpc_deadline_state_init(exec_ctx, elem, args->call_stack, |
| args->call_combiner, args->deadline); |
| return GRPC_ERROR_NONE; |
| } |
| |
| // Destructor for call_data. Used for both client and server filters. |
| static void destroy_call_elem(grpc_exec_ctx* exec_ctx, grpc_call_element* elem, |
| const grpc_call_final_info* final_info, |
| grpc_closure* ignored) { |
| grpc_deadline_state_destroy(exec_ctx, elem); |
| } |
| |
| // Method for starting a call op for client filter. |
| static void client_start_transport_stream_op_batch( |
| grpc_exec_ctx* exec_ctx, grpc_call_element* elem, |
| grpc_transport_stream_op_batch* op) { |
| grpc_deadline_state_client_start_transport_stream_op_batch(exec_ctx, elem, |
| op); |
| // Chain to next filter. |
| grpc_call_next_op(exec_ctx, elem, op); |
| } |
| |
| // Callback for receiving initial metadata on the server. |
| static void recv_initial_metadata_ready(grpc_exec_ctx* exec_ctx, void* arg, |
| grpc_error* error) { |
| grpc_call_element* elem = (grpc_call_element*)arg; |
| server_call_data* calld = (server_call_data*)elem->call_data; |
| // Get deadline from metadata and start the timer if needed. |
| start_timer_if_needed(exec_ctx, elem, calld->recv_initial_metadata->deadline); |
| // Invoke the next callback. |
| calld->next_recv_initial_metadata_ready->cb( |
| exec_ctx, calld->next_recv_initial_metadata_ready->cb_arg, error); |
| } |
| |
| // Method for starting a call op for server filter. |
| static void server_start_transport_stream_op_batch( |
| grpc_exec_ctx* exec_ctx, grpc_call_element* elem, |
| grpc_transport_stream_op_batch* op) { |
| server_call_data* calld = (server_call_data*)elem->call_data; |
| if (op->cancel_stream) { |
| cancel_timer_if_needed(exec_ctx, &calld->base.deadline_state); |
| } else { |
| // If we're receiving initial metadata, we need to get the deadline |
| // from the recv_initial_metadata_ready callback. So we inject our |
| // own callback into that hook. |
| if (op->recv_initial_metadata) { |
| calld->next_recv_initial_metadata_ready = |
| op->payload->recv_initial_metadata.recv_initial_metadata_ready; |
| calld->recv_initial_metadata = |
| op->payload->recv_initial_metadata.recv_initial_metadata; |
| GRPC_CLOSURE_INIT(&calld->recv_initial_metadata_ready, |
| recv_initial_metadata_ready, elem, |
| grpc_schedule_on_exec_ctx); |
| op->payload->recv_initial_metadata.recv_initial_metadata_ready = |
| &calld->recv_initial_metadata_ready; |
| } |
| // Make sure we know when the call is complete, so that we can cancel |
| // the timer. |
| // Note that we trigger this on recv_trailing_metadata, even though |
| // the client never sends trailing metadata, because this is the |
| // hook that tells us when the call is complete on the server side. |
| if (op->recv_trailing_metadata) { |
| inject_on_complete_cb(&calld->base.deadline_state, op); |
| } |
| } |
| // Chain to next filter. |
| grpc_call_next_op(exec_ctx, elem, op); |
| } |
| |
| const grpc_channel_filter grpc_client_deadline_filter = { |
| client_start_transport_stream_op_batch, |
| grpc_channel_next_op, |
| sizeof(base_call_data), |
| init_call_elem, |
| grpc_call_stack_ignore_set_pollset_or_pollset_set, |
| destroy_call_elem, |
| 0, // sizeof(channel_data) |
| init_channel_elem, |
| destroy_channel_elem, |
| grpc_channel_next_get_info, |
| "deadline", |
| }; |
| |
| const grpc_channel_filter grpc_server_deadline_filter = { |
| server_start_transport_stream_op_batch, |
| grpc_channel_next_op, |
| sizeof(server_call_data), |
| init_call_elem, |
| grpc_call_stack_ignore_set_pollset_or_pollset_set, |
| destroy_call_elem, |
| 0, // sizeof(channel_data) |
| init_channel_elem, |
| destroy_channel_elem, |
| grpc_channel_next_get_info, |
| "deadline", |
| }; |
| |
| bool grpc_deadline_checking_enabled(const grpc_channel_args* channel_args) { |
| return grpc_channel_arg_get_bool( |
| grpc_channel_args_find(channel_args, GRPC_ARG_ENABLE_DEADLINE_CHECKS), |
| !grpc_channel_args_want_minimal_stack(channel_args)); |
| } |
| |
| static bool maybe_add_deadline_filter(grpc_exec_ctx* exec_ctx, |
| grpc_channel_stack_builder* builder, |
| void* arg) { |
| return grpc_deadline_checking_enabled( |
| grpc_channel_stack_builder_get_channel_arguments(builder)) |
| ? grpc_channel_stack_builder_prepend_filter( |
| builder, (const grpc_channel_filter*)arg, NULL, NULL) |
| : true; |
| } |
| |
| void grpc_deadline_filter_init(void) { |
| grpc_channel_init_register_stage( |
| GRPC_CLIENT_DIRECT_CHANNEL, GRPC_CHANNEL_INIT_BUILTIN_PRIORITY, |
| maybe_add_deadline_filter, (void*)&grpc_client_deadline_filter); |
| grpc_channel_init_register_stage( |
| GRPC_SERVER_CHANNEL, GRPC_CHANNEL_INIT_BUILTIN_PRIORITY, |
| maybe_add_deadline_filter, (void*)&grpc_server_deadline_filter); |
| } |
| |
| void grpc_deadline_filter_shutdown(void) {} |