| |
| |
| # Doxyfile 1.8.9.1 |
| |
| # This file describes the settings to be used by the documentation system |
| # doxygen (www.doxygen.org) for a project. |
| # |
| # All text after a double hash (##) is considered a comment and is placed in |
| # front of the TAG it is preceding. |
| # |
| # All text after a single hash (#) is considered a comment and will be ignored. |
| # The format is: |
| # TAG = value [value, ...] |
| # For lists, items can also be appended using: |
| # TAG += value [value, ...] |
| # Values that contain spaces should be placed between quotes (\" \"). |
| |
| #--------------------------------------------------------------------------- |
| # Project related configuration options |
| #--------------------------------------------------------------------------- |
| |
| # This tag specifies the encoding used for all characters in the config file |
| # that follow. The default is UTF-8 which is also the encoding used for all text |
| # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv |
| # built into libc) for the transcoding. See http://www.gnu.org/software/libiconv |
| # for the list of possible encodings. |
| # The default value is: UTF-8. |
| |
| DOXYFILE_ENCODING = UTF-8 |
| |
| # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by |
| # double-quotes, unless you are using Doxywizard) that should identify the |
| # project for which the documentation is generated. This name is used in the |
| # title of most generated pages and in a few other places. |
| # The default value is: My Project. |
| |
| PROJECT_NAME = "GRPC C++" |
| |
| # The PROJECT_NUMBER tag can be used to enter a project or revision number. This |
| # could be handy for archiving the generated documentation or if some version |
| # control system is used. |
| |
| PROJECT_NUMBER = 0.13.0 |
| |
| # Using the PROJECT_BRIEF tag one can provide an optional one line description |
| # for a project that appears at the top of each page and should give viewer a |
| # quick idea about the purpose of the project. Keep the description short. |
| |
| PROJECT_BRIEF = |
| |
| # With the PROJECT_LOGO tag one can specify a logo or an icon that is included |
| # in the documentation. The maximum height of the logo should not exceed 55 |
| # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy |
| # the logo to the output directory. |
| |
| PROJECT_LOGO = |
| |
| # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path |
| # into which the generated documentation will be written. If a relative path is |
| # entered, it will be relative to the location where doxygen was started. If |
| # left blank the current directory will be used. |
| |
| OUTPUT_DIRECTORY = doc/ref/c++ |
| |
| # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- |
| # directories (in 2 levels) under the output directory of each output format and |
| # will distribute the generated files over these directories. Enabling this |
| # option can be useful when feeding doxygen a huge amount of source files, where |
| # putting all generated files in the same directory would otherwise causes |
| # performance problems for the file system. |
| # The default value is: NO. |
| |
| CREATE_SUBDIRS = NO |
| |
| # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII |
| # characters to appear in the names of generated files. If set to NO, non-ASCII |
| # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode |
| # U+3044. |
| # The default value is: NO. |
| |
| ALLOW_UNICODE_NAMES = NO |
| |
| # The OUTPUT_LANGUAGE tag is used to specify the language in which all |
| # documentation generated by doxygen is written. Doxygen will use this |
| # information to generate all constant output in the proper language. |
| # Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, |
| # Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), |
| # Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, |
| # Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), |
| # Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, |
| # Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, |
| # Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, |
| # Ukrainian and Vietnamese. |
| # The default value is: English. |
| |
| OUTPUT_LANGUAGE = English |
| |
| # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member |
| # descriptions after the members that are listed in the file and class |
| # documentation (similar to Javadoc). Set to NO to disable this. |
| # The default value is: YES. |
| |
| BRIEF_MEMBER_DESC = YES |
| |
| # If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief |
| # description of a member or function before the detailed description |
| # |
| # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the |
| # brief descriptions will be completely suppressed. |
| # The default value is: YES. |
| |
| REPEAT_BRIEF = YES |
| |
| # This tag implements a quasi-intelligent brief description abbreviator that is |
| # used to form the text in various listings. Each string in this list, if found |
| # as the leading text of the brief description, will be stripped from the text |
| # and the result, after processing the whole list, is used as the annotated |
| # text. Otherwise, the brief description is used as-is. If left blank, the |
| # following values are used ($name is automatically replaced with the name of |
| # the entity):The $name class, The $name widget, The $name file, is, provides, |
| # specifies, contains, represents, a, an and the. |
| |
| ABBREVIATE_BRIEF = |
| |
| # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then |
| # doxygen will generate a detailed section even if there is only a brief |
| # description. |
| # The default value is: NO. |
| |
| ALWAYS_DETAILED_SEC = NO |
| |
| # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all |
| # inherited members of a class in the documentation of that class as if those |
| # members were ordinary class members. Constructors, destructors and assignment |
| # operators of the base classes will not be shown. |
| # The default value is: NO. |
| |
| INLINE_INHERITED_MEMB = NO |
| |
| # If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path |
| # before files name in the file list and in the header files. If set to NO the |
| # shortest path that makes the file name unique will be used |
| # The default value is: YES. |
| |
| FULL_PATH_NAMES = YES |
| |
| # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. |
| # Stripping is only done if one of the specified strings matches the left-hand |
| # part of the path. The tag can be used to show relative paths in the file list. |
| # If left blank the directory from which doxygen is run is used as the path to |
| # strip. |
| # |
| # Note that you can specify absolute paths here, but also relative paths, which |
| # will be relative from the directory where doxygen is started. |
| # This tag requires that the tag FULL_PATH_NAMES is set to YES. |
| |
| STRIP_FROM_PATH = |
| |
| # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the |
| # path mentioned in the documentation of a class, which tells the reader which |
| # header file to include in order to use a class. If left blank only the name of |
| # the header file containing the class definition is used. Otherwise one should |
| # specify the list of include paths that are normally passed to the compiler |
| # using the -I flag. |
| |
| STRIP_FROM_INC_PATH = |
| |
| # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but |
| # less readable) file names. This can be useful is your file systems doesn't |
| # support long names like on DOS, Mac, or CD-ROM. |
| # The default value is: NO. |
| |
| SHORT_NAMES = NO |
| |
| # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the |
| # first line (until the first dot) of a Javadoc-style comment as the brief |
| # description. If set to NO, the Javadoc-style will behave just like regular Qt- |
| # style comments (thus requiring an explicit @brief command for a brief |
| # description.) |
| # The default value is: NO. |
| |
| JAVADOC_AUTOBRIEF = YES |
| |
| # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first |
| # line (until the first dot) of a Qt-style comment as the brief description. If |
| # set to NO, the Qt-style will behave just like regular Qt-style comments (thus |
| # requiring an explicit \brief command for a brief description.) |
| # The default value is: NO. |
| |
| QT_AUTOBRIEF = NO |
| |
| # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a |
| # multi-line C++ special comment block (i.e. a block of //! or /// comments) as |
| # a brief description. This used to be the default behavior. The new default is |
| # to treat a multi-line C++ comment block as a detailed description. Set this |
| # tag to YES if you prefer the old behavior instead. |
| # |
| # Note that setting this tag to YES also means that rational rose comments are |
| # not recognized any more. |
| # The default value is: NO. |
| |
| MULTILINE_CPP_IS_BRIEF = NO |
| |
| # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the |
| # documentation from any documented member that it re-implements. |
| # The default value is: YES. |
| |
| INHERIT_DOCS = YES |
| |
| # If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new |
| # page for each member. If set to NO, the documentation of a member will be part |
| # of the file/class/namespace that contains it. |
| # The default value is: NO. |
| |
| SEPARATE_MEMBER_PAGES = NO |
| |
| # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen |
| # uses this value to replace tabs by spaces in code fragments. |
| # Minimum value: 1, maximum value: 16, default value: 4. |
| |
| TAB_SIZE = 2 |
| |
| # This tag can be used to specify a number of aliases that act as commands in |
| # the documentation. An alias has the form: |
| # name=value |
| # For example adding |
| # "sideeffect=@par Side Effects:\n" |
| # will allow you to put the command \sideeffect (or @sideeffect) in the |
| # documentation, which will result in a user-defined paragraph with heading |
| # "Side Effects:". You can put \n's in the value part of an alias to insert |
| # newlines. |
| |
| ALIASES = |
| |
| # This tag can be used to specify a number of word-keyword mappings (TCL only). |
| # A mapping has the form "name=value". For example adding "class=itcl::class" |
| # will allow you to use the command class in the itcl::class meaning. |
| |
| TCL_SUBST = |
| |
| # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources |
| # only. Doxygen will then generate output that is more tailored for C. For |
| # instance, some of the names that are used will be different. The list of all |
| # members will be omitted, etc. |
| # The default value is: NO. |
| |
| OPTIMIZE_OUTPUT_FOR_C = YES |
| |
| # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or |
| # Python sources only. Doxygen will then generate output that is more tailored |
| # for that language. For instance, namespaces will be presented as packages, |
| # qualified scopes will look different, etc. |
| # The default value is: NO. |
| |
| OPTIMIZE_OUTPUT_JAVA = NO |
| |
| # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran |
| # sources. Doxygen will then generate output that is tailored for Fortran. |
| # The default value is: NO. |
| |
| OPTIMIZE_FOR_FORTRAN = NO |
| |
| # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL |
| # sources. Doxygen will then generate output that is tailored for VHDL. |
| # The default value is: NO. |
| |
| OPTIMIZE_OUTPUT_VHDL = NO |
| |
| # Doxygen selects the parser to use depending on the extension of the files it |
| # parses. With this tag you can assign which parser to use for a given |
| # extension. Doxygen has a built-in mapping, but you can override or extend it |
| # using this tag. The format is ext=language, where ext is a file extension, and |
| # language is one of the parsers supported by doxygen: IDL, Java, Javascript, |
| # C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: |
| # FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: |
| # Fortran. In the later case the parser tries to guess whether the code is fixed |
| # or free formatted code, this is the default for Fortran type files), VHDL. For |
| # instance to make doxygen treat .inc files as Fortran files (default is PHP), |
| # and .f files as C (default is Fortran), use: inc=Fortran f=C. |
| # |
| # Note: For files without extension you can use no_extension as a placeholder. |
| # |
| # Note that for custom extensions you also need to set FILE_PATTERNS otherwise |
| # the files are not read by doxygen. |
| |
| EXTENSION_MAPPING = |
| |
| # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments |
| # according to the Markdown format, which allows for more readable |
| # documentation. See http://daringfireball.net/projects/markdown/ for details. |
| # The output of markdown processing is further processed by doxygen, so you can |
| # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in |
| # case of backward compatibilities issues. |
| # The default value is: YES. |
| |
| MARKDOWN_SUPPORT = YES |
| |
| # When enabled doxygen tries to link words that correspond to documented |
| # classes, or namespaces to their corresponding documentation. Such a link can |
| # be prevented in individual cases by putting a % sign in front of the word or |
| # globally by setting AUTOLINK_SUPPORT to NO. |
| # The default value is: YES. |
| |
| AUTOLINK_SUPPORT = YES |
| |
| # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want |
| # to include (a tag file for) the STL sources as input, then you should set this |
| # tag to YES in order to let doxygen match functions declarations and |
| # definitions whose arguments contain STL classes (e.g. func(std::string); |
| # versus func(std::string) {}). This also make the inheritance and collaboration |
| # diagrams that involve STL classes more complete and accurate. |
| # The default value is: NO. |
| |
| BUILTIN_STL_SUPPORT = NO |
| |
| # If you use Microsoft's C++/CLI language, you should set this option to YES to |
| # enable parsing support. |
| # The default value is: NO. |
| |
| CPP_CLI_SUPPORT = NO |
| |
| # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: |
| # http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen |
| # will parse them like normal C++ but will assume all classes use public instead |
| # of private inheritance when no explicit protection keyword is present. |
| # The default value is: NO. |
| |
| SIP_SUPPORT = NO |
| |
| # For Microsoft's IDL there are propget and propput attributes to indicate |
| # getter and setter methods for a property. Setting this option to YES will make |
| # doxygen to replace the get and set methods by a property in the documentation. |
| # This will only work if the methods are indeed getting or setting a simple |
| # type. If this is not the case, or you want to show the methods anyway, you |
| # should set this option to NO. |
| # The default value is: YES. |
| |
| IDL_PROPERTY_SUPPORT = YES |
| |
| # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC |
| # tag is set to YES then doxygen will reuse the documentation of the first |
| # member in the group (if any) for the other members of the group. By default |
| # all members of a group must be documented explicitly. |
| # The default value is: NO. |
| |
| DISTRIBUTE_GROUP_DOC = NO |
| |
| # Set the SUBGROUPING tag to YES to allow class member groups of the same type |
| # (for instance a group of public functions) to be put as a subgroup of that |
| # type (e.g. under the Public Functions section). Set it to NO to prevent |
| # subgrouping. Alternatively, this can be done per class using the |
| # \nosubgrouping command. |
| # The default value is: YES. |
| |
| SUBGROUPING = YES |
| |
| # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions |
| # are shown inside the group in which they are included (e.g. using \ingroup) |
| # instead of on a separate page (for HTML and Man pages) or section (for LaTeX |
| # and RTF). |
| # |
| # Note that this feature does not work in combination with |
| # SEPARATE_MEMBER_PAGES. |
| # The default value is: NO. |
| |
| INLINE_GROUPED_CLASSES = NO |
| |
| # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions |
| # with only public data fields or simple typedef fields will be shown inline in |
| # the documentation of the scope in which they are defined (i.e. file, |
| # namespace, or group documentation), provided this scope is documented. If set |
| # to NO, structs, classes, and unions are shown on a separate page (for HTML and |
| # Man pages) or section (for LaTeX and RTF). |
| # The default value is: NO. |
| |
| INLINE_SIMPLE_STRUCTS = NO |
| |
| # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or |
| # enum is documented as struct, union, or enum with the name of the typedef. So |
| # typedef struct TypeS {} TypeT, will appear in the documentation as a struct |
| # with name TypeT. When disabled the typedef will appear as a member of a file, |
| # namespace, or class. And the struct will be named TypeS. This can typically be |
| # useful for C code in case the coding convention dictates that all compound |
| # types are typedef'ed and only the typedef is referenced, never the tag name. |
| # The default value is: NO. |
| |
| TYPEDEF_HIDES_STRUCT = NO |
| |
| # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This |
| # cache is used to resolve symbols given their name and scope. Since this can be |
| # an expensive process and often the same symbol appears multiple times in the |
| # code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small |
| # doxygen will become slower. If the cache is too large, memory is wasted. The |
| # cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range |
| # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 |
| # symbols. At the end of a run doxygen will report the cache usage and suggest |
| # the optimal cache size from a speed point of view. |
| # Minimum value: 0, maximum value: 9, default value: 0. |
| |
| LOOKUP_CACHE_SIZE = 0 |
| |
| #--------------------------------------------------------------------------- |
| # Build related configuration options |
| #--------------------------------------------------------------------------- |
| |
| # If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in |
| # documentation are documented, even if no documentation was available. Private |
| # class members and static file members will be hidden unless the |
| # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. |
| # Note: This will also disable the warnings about undocumented members that are |
| # normally produced when WARNINGS is set to YES. |
| # The default value is: NO. |
| |
| EXTRACT_ALL = YES |
| |
| # If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will |
| # be included in the documentation. |
| # The default value is: NO. |
| |
| EXTRACT_PRIVATE = NO |
| |
| # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal |
| # scope will be included in the documentation. |
| # The default value is: NO. |
| |
| EXTRACT_PACKAGE = NO |
| |
| # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be |
| # included in the documentation. |
| # The default value is: NO. |
| |
| EXTRACT_STATIC = NO |
| |
| # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined |
| # locally in source files will be included in the documentation. If set to NO, |
| # only classes defined in header files are included. Does not have any effect |
| # for Java sources. |
| # The default value is: YES. |
| |
| EXTRACT_LOCAL_CLASSES = YES |
| |
| # This flag is only useful for Objective-C code. If set to YES, local methods, |
| # which are defined in the implementation section but not in the interface are |
| # included in the documentation. If set to NO, only methods in the interface are |
| # included. |
| # The default value is: NO. |
| |
| EXTRACT_LOCAL_METHODS = NO |
| |
| # If this flag is set to YES, the members of anonymous namespaces will be |
| # extracted and appear in the documentation as a namespace called |
| # 'anonymous_namespace{file}', where file will be replaced with the base name of |
| # the file that contains the anonymous namespace. By default anonymous namespace |
| # are hidden. |
| # The default value is: NO. |
| |
| EXTRACT_ANON_NSPACES = NO |
| |
| # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all |
| # undocumented members inside documented classes or files. If set to NO these |
| # members will be included in the various overviews, but no documentation |
| # section is generated. This option has no effect if EXTRACT_ALL is enabled. |
| # The default value is: NO. |
| |
| HIDE_UNDOC_MEMBERS = NO |
| |
| # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all |
| # undocumented classes that are normally visible in the class hierarchy. If set |
| # to NO, these classes will be included in the various overviews. This option |
| # has no effect if EXTRACT_ALL is enabled. |
| # The default value is: NO. |
| |
| HIDE_UNDOC_CLASSES = NO |
| |
| # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend |
| # (class|struct|union) declarations. If set to NO, these declarations will be |
| # included in the documentation. |
| # The default value is: NO. |
| |
| HIDE_FRIEND_COMPOUNDS = NO |
| |
| # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any |
| # documentation blocks found inside the body of a function. If set to NO, these |
| # blocks will be appended to the function's detailed documentation block. |
| # The default value is: NO. |
| |
| HIDE_IN_BODY_DOCS = NO |
| |
| # The INTERNAL_DOCS tag determines if documentation that is typed after a |
| # \internal command is included. If the tag is set to NO then the documentation |
| # will be excluded. Set it to YES to include the internal documentation. |
| # The default value is: NO. |
| |
| INTERNAL_DOCS = NO |
| |
| # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file |
| # names in lower-case letters. If set to YES, upper-case letters are also |
| # allowed. This is useful if you have classes or files whose names only differ |
| # in case and if your file system supports case sensitive file names. Windows |
| # and Mac users are advised to set this option to NO. |
| # The default value is: system dependent. |
| |
| CASE_SENSE_NAMES = NO |
| |
| # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with |
| # their full class and namespace scopes in the documentation. If set to YES, the |
| # scope will be hidden. |
| # The default value is: NO. |
| |
| HIDE_SCOPE_NAMES = NO |
| |
| # If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will |
| # append additional text to a page's title, such as Class Reference. If set to |
| # YES the compound reference will be hidden. |
| # The default value is: NO. |
| |
| HIDE_COMPOUND_REFERENCE= NO |
| |
| # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of |
| # the files that are included by a file in the documentation of that file. |
| # The default value is: YES. |
| |
| SHOW_INCLUDE_FILES = YES |
| |
| # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each |
| # grouped member an include statement to the documentation, telling the reader |
| # which file to include in order to use the member. |
| # The default value is: NO. |
| |
| SHOW_GROUPED_MEMB_INC = NO |
| |
| # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include |
| # files with double quotes in the documentation rather than with sharp brackets. |
| # The default value is: NO. |
| |
| FORCE_LOCAL_INCLUDES = NO |
| |
| # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the |
| # documentation for inline members. |
| # The default value is: YES. |
| |
| INLINE_INFO = YES |
| |
| # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the |
| # (detailed) documentation of file and class members alphabetically by member |
| # name. If set to NO, the members will appear in declaration order. |
| # The default value is: YES. |
| |
| SORT_MEMBER_DOCS = YES |
| |
| # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief |
| # descriptions of file, namespace and class members alphabetically by member |
| # name. If set to NO, the members will appear in declaration order. Note that |
| # this will also influence the order of the classes in the class list. |
| # The default value is: NO. |
| |
| SORT_BRIEF_DOCS = NO |
| |
| # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the |
| # (brief and detailed) documentation of class members so that constructors and |
| # destructors are listed first. If set to NO the constructors will appear in the |
| # respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. |
| # Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief |
| # member documentation. |
| # Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting |
| # detailed member documentation. |
| # The default value is: NO. |
| |
| SORT_MEMBERS_CTORS_1ST = NO |
| |
| # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy |
| # of group names into alphabetical order. If set to NO the group names will |
| # appear in their defined order. |
| # The default value is: NO. |
| |
| SORT_GROUP_NAMES = NO |
| |
| # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by |
| # fully-qualified names, including namespaces. If set to NO, the class list will |
| # be sorted only by class name, not including the namespace part. |
| # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. |
| # Note: This option applies only to the class list, not to the alphabetical |
| # list. |
| # The default value is: NO. |
| |
| SORT_BY_SCOPE_NAME = NO |
| |
| # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper |
| # type resolution of all parameters of a function it will reject a match between |
| # the prototype and the implementation of a member function even if there is |
| # only one candidate or it is obvious which candidate to choose by doing a |
| # simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still |
| # accept a match between prototype and implementation in such cases. |
| # The default value is: NO. |
| |
| STRICT_PROTO_MATCHING = NO |
| |
| # The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo |
| # list. This list is created by putting \todo commands in the documentation. |
| # The default value is: YES. |
| |
| GENERATE_TODOLIST = YES |
| |
| # The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test |
| # list. This list is created by putting \test commands in the documentation. |
| # The default value is: YES. |
| |
| GENERATE_TESTLIST = YES |
| |
| # The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug |
| # list. This list is created by putting \bug commands in the documentation. |
| # The default value is: YES. |
| |
| GENERATE_BUGLIST = YES |
| |
| # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) |
| # the deprecated list. This list is created by putting \deprecated commands in |
| # the documentation. |
| # The default value is: YES. |
| |
| GENERATE_DEPRECATEDLIST= YES |
| |
| # The ENABLED_SECTIONS tag can be used to enable conditional documentation |
| # sections, marked by \if <section_label> ... \endif and \cond <section_label> |
| # ... \endcond blocks. |
| |
| ENABLED_SECTIONS = |
| |
| # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the |
| # initial value of a variable or macro / define can have for it to appear in the |
| # documentation. If the initializer consists of more lines than specified here |
| # it will be hidden. Use a value of 0 to hide initializers completely. The |
| # appearance of the value of individual variables and macros / defines can be |
| # controlled using \showinitializer or \hideinitializer command in the |
| # documentation regardless of this setting. |
| # Minimum value: 0, maximum value: 10000, default value: 30. |
| |
| MAX_INITIALIZER_LINES = 30 |
| |
| # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at |
| # the bottom of the documentation of classes and structs. If set to YES, the |
| # list will mention the files that were used to generate the documentation. |
| # The default value is: YES. |
| |
| SHOW_USED_FILES = YES |
| |
| # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This |
| # will remove the Files entry from the Quick Index and from the Folder Tree View |
| # (if specified). |
| # The default value is: YES. |
| |
| SHOW_FILES = YES |
| |
| # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces |
| # page. This will remove the Namespaces entry from the Quick Index and from the |
| # Folder Tree View (if specified). |
| # The default value is: YES. |
| |
| SHOW_NAMESPACES = YES |
| |
| # The FILE_VERSION_FILTER tag can be used to specify a program or script that |
| # doxygen should invoke to get the current version for each file (typically from |
| # the version control system). Doxygen will invoke the program by executing (via |
| # popen()) the command command input-file, where command is the value of the |
| # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided |
| # by doxygen. Whatever the program writes to standard output is used as the file |
| # version. For an example see the documentation. |
| |
| FILE_VERSION_FILTER = |
| |
| # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed |
| # by doxygen. The layout file controls the global structure of the generated |
| # output files in an output format independent way. To create the layout file |
| # that represents doxygen's defaults, run doxygen with the -l option. You can |
| # optionally specify a file name after the option, if omitted DoxygenLayout.xml |
| # will be used as the name of the layout file. |
| # |
| # Note that if you run doxygen from a directory containing a file called |
| # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE |
| # tag is left empty. |
| |
| LAYOUT_FILE = |
| |
| # The CITE_BIB_FILES tag can be used to specify one or more bib files containing |
| # the reference definitions. This must be a list of .bib files. The .bib |
| # extension is automatically appended if omitted. This requires the bibtex tool |
| # to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. |
| # For LaTeX the style of the bibliography can be controlled using |
| # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the |
| # search path. See also \cite for info how to create references. |
| |
| CITE_BIB_FILES = |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to warning and progress messages |
| #--------------------------------------------------------------------------- |
| |
| # The QUIET tag can be used to turn on/off the messages that are generated to |
| # standard output by doxygen. If QUIET is set to YES this implies that the |
| # messages are off. |
| # The default value is: NO. |
| |
| QUIET = NO |
| |
| # The WARNINGS tag can be used to turn on/off the warning messages that are |
| # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES |
| # this implies that the warnings are on. |
| # |
| # Tip: Turn warnings on while writing the documentation. |
| # The default value is: YES. |
| |
| WARNINGS = YES |
| |
| # If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate |
| # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag |
| # will automatically be disabled. |
| # The default value is: YES. |
| |
| WARN_IF_UNDOCUMENTED = YES |
| |
| # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for |
| # potential errors in the documentation, such as not documenting some parameters |
| # in a documented function, or documenting parameters that don't exist or using |
| # markup commands wrongly. |
| # The default value is: YES. |
| |
| WARN_IF_DOC_ERROR = YES |
| |
| # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that |
| # are documented, but have no documentation for their parameters or return |
| # value. If set to NO, doxygen will only warn about wrong or incomplete |
| # parameter documentation, but not about the absence of documentation. |
| # The default value is: NO. |
| |
| WARN_NO_PARAMDOC = NO |
| |
| # The WARN_FORMAT tag determines the format of the warning messages that doxygen |
| # can produce. The string should contain the $file, $line, and $text tags, which |
| # will be replaced by the file and line number from which the warning originated |
| # and the warning text. Optionally the format may contain $version, which will |
| # be replaced by the version of the file (if it could be obtained via |
| # FILE_VERSION_FILTER) |
| # The default value is: $file:$line: $text. |
| |
| WARN_FORMAT = "$file:$line: $text" |
| |
| # The WARN_LOGFILE tag can be used to specify a file to which warning and error |
| # messages should be written. If left blank the output is written to standard |
| # error (stderr). |
| |
| WARN_LOGFILE = |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the input files |
| #--------------------------------------------------------------------------- |
| |
| # The INPUT tag is used to specify the files and/or directories that contain |
| # documented source files. You may enter file names like myfile.cpp or |
| # directories like /usr/src/myproject. Separate the files or directories with |
| # spaces. |
| # Note: If this tag is empty the current directory is searched. |
| |
| INPUT = include/grpc++/channel.h \ |
| include/grpc++/client_context.h \ |
| include/grpc++/completion_queue.h \ |
| include/grpc++/create_channel.h \ |
| include/grpc++/generic/async_generic_service.h \ |
| include/grpc++/generic/generic_stub.h \ |
| include/grpc++/grpc++.h \ |
| include/grpc++/impl/call.h \ |
| include/grpc++/impl/client_unary_call.h \ |
| include/grpc++/impl/grpc_library.h \ |
| include/grpc++/impl/method_handler_impl.h \ |
| include/grpc++/impl/proto_utils.h \ |
| include/grpc++/impl/rpc_method.h \ |
| include/grpc++/impl/rpc_service_method.h \ |
| include/grpc++/impl/serialization_traits.h \ |
| include/grpc++/impl/server_builder_option.h \ |
| include/grpc++/impl/service_type.h \ |
| include/grpc++/impl/sync.h \ |
| include/grpc++/impl/sync_cxx11.h \ |
| include/grpc++/impl/sync_no_cxx11.h \ |
| include/grpc++/impl/thd.h \ |
| include/grpc++/impl/thd_cxx11.h \ |
| include/grpc++/impl/thd_no_cxx11.h \ |
| include/grpc++/security/auth_context.h \ |
| include/grpc++/security/auth_metadata_processor.h \ |
| include/grpc++/security/credentials.h \ |
| include/grpc++/security/server_credentials.h \ |
| include/grpc++/server.h \ |
| include/grpc++/server_builder.h \ |
| include/grpc++/server_context.h \ |
| include/grpc++/support/async_stream.h \ |
| include/grpc++/support/async_unary_call.h \ |
| include/grpc++/support/byte_buffer.h \ |
| include/grpc++/support/channel_arguments.h \ |
| include/grpc++/support/config.h \ |
| include/grpc++/support/config_protobuf.h \ |
| include/grpc++/support/slice.h \ |
| include/grpc++/support/status.h \ |
| include/grpc++/support/status_code_enum.h \ |
| include/grpc++/support/string_ref.h \ |
| include/grpc++/support/stub_options.h \ |
| include/grpc++/support/sync_stream.h \ |
| include/grpc++/support/time.h \ |
| include/grpc++/impl/codegen/async_stream.h \ |
| include/grpc++/impl/codegen/async_unary_call.h \ |
| include/grpc++/impl/codegen/call.h \ |
| include/grpc++/impl/codegen/call_hook.h \ |
| include/grpc++/impl/codegen/channel_interface.h \ |
| include/grpc++/impl/codegen/client_context.h \ |
| include/grpc++/impl/codegen/client_unary_call.h \ |
| include/grpc++/impl/codegen/completion_queue.h \ |
| include/grpc++/impl/codegen/completion_queue_tag.h \ |
| include/grpc++/impl/codegen/config.h \ |
| include/grpc++/impl/codegen/config_protobuf.h \ |
| include/grpc++/impl/codegen/grpc_library.h \ |
| include/grpc++/impl/codegen/method_handler_impl.h \ |
| include/grpc++/impl/codegen/proto_utils.h \ |
| include/grpc++/impl/codegen/rpc_method.h \ |
| include/grpc++/impl/codegen/rpc_service_method.h \ |
| include/grpc++/impl/codegen/security/auth_context.h \ |
| include/grpc++/impl/codegen/serialization_traits.h \ |
| include/grpc++/impl/codegen/server_context.h \ |
| include/grpc++/impl/codegen/server_interface.h \ |
| include/grpc++/impl/codegen/service_type.h \ |
| include/grpc++/impl/codegen/status.h \ |
| include/grpc++/impl/codegen/status_code_enum.h \ |
| include/grpc++/impl/codegen/string_ref.h \ |
| include/grpc++/impl/codegen/stub_options.h \ |
| include/grpc++/impl/codegen/sync.h \ |
| include/grpc++/impl/codegen/sync_cxx11.h \ |
| include/grpc++/impl/codegen/sync_no_cxx11.h \ |
| include/grpc++/impl/codegen/sync_stream.h \ |
| include/grpc++/impl/codegen/time.h |
| |
| # This tag can be used to specify the character encoding of the source files |
| # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses |
| # libiconv (or the iconv built into libc) for the transcoding. See the libiconv |
| # documentation (see: http://www.gnu.org/software/libiconv) for the list of |
| # possible encodings. |
| # The default value is: UTF-8. |
| |
| INPUT_ENCODING = UTF-8 |
| |
| # If the value of the INPUT tag contains directories, you can use the |
| # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and |
| # *.h) to filter out the source-files in the directories. If left blank the |
| # following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, |
| # *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, |
| # *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, |
| # *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, |
| # *.qsf, *.as and *.js. |
| |
| FILE_PATTERNS = |
| |
| # The RECURSIVE tag can be used to specify whether or not subdirectories should |
| # be searched for input files as well. |
| # The default value is: NO. |
| |
| RECURSIVE = NO |
| |
| # The EXCLUDE tag can be used to specify files and/or directories that should be |
| # excluded from the INPUT source files. This way you can easily exclude a |
| # subdirectory from a directory tree whose root is specified with the INPUT tag. |
| # |
| # Note that relative paths are relative to the directory from which doxygen is |
| # run. |
| |
| EXCLUDE = |
| |
| # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or |
| # directories that are symbolic links (a Unix file system feature) are excluded |
| # from the input. |
| # The default value is: NO. |
| |
| EXCLUDE_SYMLINKS = NO |
| |
| # If the value of the INPUT tag contains directories, you can use the |
| # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude |
| # certain files from those directories. |
| # |
| # Note that the wildcards are matched against the file with absolute path, so to |
| # exclude all test directories for example use the pattern */test/* |
| |
| EXCLUDE_PATTERNS = |
| |
| # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names |
| # (namespaces, classes, functions, etc.) that should be excluded from the |
| # output. The symbol name can be a fully qualified name, a word, or if the |
| # wildcard * is used, a substring. Examples: ANamespace, AClass, |
| # AClass::ANamespace, ANamespace::*Test |
| # |
| # Note that the wildcards are matched against the file with absolute path, so to |
| # exclude all test directories use the pattern */test/* |
| |
| EXCLUDE_SYMBOLS = |
| |
| # The EXAMPLE_PATH tag can be used to specify one or more files or directories |
| # that contain example code fragments that are included (see the \include |
| # command). |
| |
| EXAMPLE_PATH = |
| |
| # If the value of the EXAMPLE_PATH tag contains directories, you can use the |
| # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and |
| # *.h) to filter out the source-files in the directories. If left blank all |
| # files are included. |
| |
| EXAMPLE_PATTERNS = |
| |
| # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be |
| # searched for input files to be used with the \include or \dontinclude commands |
| # irrespective of the value of the RECURSIVE tag. |
| # The default value is: NO. |
| |
| EXAMPLE_RECURSIVE = NO |
| |
| # The IMAGE_PATH tag can be used to specify one or more files or directories |
| # that contain images that are to be included in the documentation (see the |
| # \image command). |
| |
| IMAGE_PATH = |
| |
| # The INPUT_FILTER tag can be used to specify a program that doxygen should |
| # invoke to filter for each input file. Doxygen will invoke the filter program |
| # by executing (via popen()) the command: |
| # |
| # <filter> <input-file> |
| # |
| # where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the |
| # name of an input file. Doxygen will then use the output that the filter |
| # program writes to standard output. If FILTER_PATTERNS is specified, this tag |
| # will be ignored. |
| # |
| # Note that the filter must not add or remove lines; it is applied before the |
| # code is scanned, but not when the output code is generated. If lines are added |
| # or removed, the anchors will not be placed correctly. |
| |
| INPUT_FILTER = |
| |
| # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern |
| # basis. Doxygen will compare the file name with each pattern and apply the |
| # filter if there is a match. The filters are a list of the form: pattern=filter |
| # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how |
| # filters are used. If the FILTER_PATTERNS tag is empty or if none of the |
| # patterns match the file name, INPUT_FILTER is applied. |
| |
| FILTER_PATTERNS = |
| |
| # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using |
| # INPUT_FILTER) will also be used to filter the input files that are used for |
| # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). |
| # The default value is: NO. |
| |
| FILTER_SOURCE_FILES = NO |
| |
| # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file |
| # pattern. A pattern will override the setting for FILTER_PATTERN (if any) and |
| # it is also possible to disable source filtering for a specific pattern using |
| # *.ext= (so without naming a filter). |
| # This tag requires that the tag FILTER_SOURCE_FILES is set to YES. |
| |
| FILTER_SOURCE_PATTERNS = |
| |
| # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that |
| # is part of the input, its contents will be placed on the main page |
| # (index.html). This can be useful if you have a project on for instance GitHub |
| # and want to reuse the introduction page also for the doxygen output. |
| |
| USE_MDFILE_AS_MAINPAGE = |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to source browsing |
| #--------------------------------------------------------------------------- |
| |
| # If the SOURCE_BROWSER tag is set to YES then a list of source files will be |
| # generated. Documented entities will be cross-referenced with these sources. |
| # |
| # Note: To get rid of all source code in the generated output, make sure that |
| # also VERBATIM_HEADERS is set to NO. |
| # The default value is: NO. |
| |
| SOURCE_BROWSER = NO |
| |
| # Setting the INLINE_SOURCES tag to YES will include the body of functions, |
| # classes and enums directly into the documentation. |
| # The default value is: NO. |
| |
| INLINE_SOURCES = NO |
| |
| # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any |
| # special comment blocks from generated source code fragments. Normal C, C++ and |
| # Fortran comments will always remain visible. |
| # The default value is: YES. |
| |
| STRIP_CODE_COMMENTS = YES |
| |
| # If the REFERENCED_BY_RELATION tag is set to YES then for each documented |
| # function all documented functions referencing it will be listed. |
| # The default value is: NO. |
| |
| REFERENCED_BY_RELATION = NO |
| |
| # If the REFERENCES_RELATION tag is set to YES then for each documented function |
| # all documented entities called/used by that function will be listed. |
| # The default value is: NO. |
| |
| REFERENCES_RELATION = NO |
| |
| # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set |
| # to YES then the hyperlinks from functions in REFERENCES_RELATION and |
| # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will |
| # link to the documentation. |
| # The default value is: YES. |
| |
| REFERENCES_LINK_SOURCE = YES |
| |
| # If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the |
| # source code will show a tooltip with additional information such as prototype, |
| # brief description and links to the definition and documentation. Since this |
| # will make the HTML file larger and loading of large files a bit slower, you |
| # can opt to disable this feature. |
| # The default value is: YES. |
| # This tag requires that the tag SOURCE_BROWSER is set to YES. |
| |
| SOURCE_TOOLTIPS = YES |
| |
| # If the USE_HTAGS tag is set to YES then the references to source code will |
| # point to the HTML generated by the htags(1) tool instead of doxygen built-in |
| # source browser. The htags tool is part of GNU's global source tagging system |
| # (see http://www.gnu.org/software/global/global.html). You will need version |
| # 4.8.6 or higher. |
| # |
| # To use it do the following: |
| # - Install the latest version of global |
| # - Enable SOURCE_BROWSER and USE_HTAGS in the config file |
| # - Make sure the INPUT points to the root of the source tree |
| # - Run doxygen as normal |
| # |
| # Doxygen will invoke htags (and that will in turn invoke gtags), so these |
| # tools must be available from the command line (i.e. in the search path). |
| # |
| # The result: instead of the source browser generated by doxygen, the links to |
| # source code will now point to the output of htags. |
| # The default value is: NO. |
| # This tag requires that the tag SOURCE_BROWSER is set to YES. |
| |
| USE_HTAGS = NO |
| |
| # If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a |
| # verbatim copy of the header file for each class for which an include is |
| # specified. Set to NO to disable this. |
| # See also: Section \class. |
| # The default value is: YES. |
| |
| VERBATIM_HEADERS = YES |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the alphabetical class index |
| #--------------------------------------------------------------------------- |
| |
| # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all |
| # compounds will be generated. Enable this if the project contains a lot of |
| # classes, structs, unions or interfaces. |
| # The default value is: YES. |
| |
| ALPHABETICAL_INDEX = YES |
| |
| # The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in |
| # which the alphabetical index list will be split. |
| # Minimum value: 1, maximum value: 20, default value: 5. |
| # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. |
| |
| COLS_IN_ALPHA_INDEX = 5 |
| |
| # In case all classes in a project start with a common prefix, all classes will |
| # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag |
| # can be used to specify a prefix (or a list of prefixes) that should be ignored |
| # while generating the index headers. |
| # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. |
| |
| IGNORE_PREFIX = |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the HTML output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output |
| # The default value is: YES. |
| |
| GENERATE_HTML = YES |
| |
| # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a |
| # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of |
| # it. |
| # The default directory is: html. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_OUTPUT = html |
| |
| # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each |
| # generated HTML page (for example: .htm, .php, .asp). |
| # The default value is: .html. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_FILE_EXTENSION = .html |
| |
| # The HTML_HEADER tag can be used to specify a user-defined HTML header file for |
| # each generated HTML page. If the tag is left blank doxygen will generate a |
| # standard header. |
| # |
| # To get valid HTML the header file that includes any scripts and style sheets |
| # that doxygen needs, which is dependent on the configuration options used (e.g. |
| # the setting GENERATE_TREEVIEW). It is highly recommended to start with a |
| # default header using |
| # doxygen -w html new_header.html new_footer.html new_stylesheet.css |
| # YourConfigFile |
| # and then modify the file new_header.html. See also section "Doxygen usage" |
| # for information on how to generate the default header that doxygen normally |
| # uses. |
| # Note: The header is subject to change so you typically have to regenerate the |
| # default header when upgrading to a newer version of doxygen. For a description |
| # of the possible markers and block names see the documentation. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_HEADER = |
| |
| # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each |
| # generated HTML page. If the tag is left blank doxygen will generate a standard |
| # footer. See HTML_HEADER for more information on how to generate a default |
| # footer and what special commands can be used inside the footer. See also |
| # section "Doxygen usage" for information on how to generate the default footer |
| # that doxygen normally uses. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_FOOTER = |
| |
| # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style |
| # sheet that is used by each HTML page. It can be used to fine-tune the look of |
| # the HTML output. If left blank doxygen will generate a default style sheet. |
| # See also section "Doxygen usage" for information on how to generate the style |
| # sheet that doxygen normally uses. |
| # Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as |
| # it is more robust and this tag (HTML_STYLESHEET) will in the future become |
| # obsolete. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_STYLESHEET = |
| |
| # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined |
| # cascading style sheets that are included after the standard style sheets |
| # created by doxygen. Using this option one can overrule certain style aspects. |
| # This is preferred over using HTML_STYLESHEET since it does not replace the |
| # standard style sheet and is therefore more robust against future updates. |
| # Doxygen will copy the style sheet files to the output directory. |
| # Note: The order of the extra style sheet files is of importance (e.g. the last |
| # style sheet in the list overrules the setting of the previous ones in the |
| # list). For an example see the documentation. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_EXTRA_STYLESHEET = |
| |
| # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or |
| # other source files which should be copied to the HTML output directory. Note |
| # that these files will be copied to the base HTML output directory. Use the |
| # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these |
| # files. In the HTML_STYLESHEET file, use the file name only. Also note that the |
| # files will be copied as-is; there are no commands or markers available. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_EXTRA_FILES = |
| |
| # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen |
| # will adjust the colors in the style sheet and background images according to |
| # this color. Hue is specified as an angle on a colorwheel, see |
| # http://en.wikipedia.org/wiki/Hue for more information. For instance the value |
| # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 |
| # purple, and 360 is red again. |
| # Minimum value: 0, maximum value: 359, default value: 220. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_COLORSTYLE_HUE = 220 |
| |
| # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors |
| # in the HTML output. For a value of 0 the output will use grayscales only. A |
| # value of 255 will produce the most vivid colors. |
| # Minimum value: 0, maximum value: 255, default value: 100. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_COLORSTYLE_SAT = 100 |
| |
| # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the |
| # luminance component of the colors in the HTML output. Values below 100 |
| # gradually make the output lighter, whereas values above 100 make the output |
| # darker. The value divided by 100 is the actual gamma applied, so 80 represents |
| # a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not |
| # change the gamma. |
| # Minimum value: 40, maximum value: 240, default value: 80. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_COLORSTYLE_GAMMA = 80 |
| |
| # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML |
| # page will contain the date and time when the page was generated. Setting this |
| # to NO can help when comparing the output of multiple runs. |
| # The default value is: YES. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_TIMESTAMP = YES |
| |
| # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML |
| # documentation will contain sections that can be hidden and shown after the |
| # page has loaded. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_DYNAMIC_SECTIONS = NO |
| |
| # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries |
| # shown in the various tree structured indices initially; the user can expand |
| # and collapse entries dynamically later on. Doxygen will expand the tree to |
| # such a level that at most the specified number of entries are visible (unless |
| # a fully collapsed tree already exceeds this amount). So setting the number of |
| # entries 1 will produce a full collapsed tree by default. 0 is a special value |
| # representing an infinite number of entries and will result in a full expanded |
| # tree by default. |
| # Minimum value: 0, maximum value: 9999, default value: 100. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| HTML_INDEX_NUM_ENTRIES = 100 |
| |
| # If the GENERATE_DOCSET tag is set to YES, additional index files will be |
| # generated that can be used as input for Apple's Xcode 3 integrated development |
| # environment (see: http://developer.apple.com/tools/xcode/), introduced with |
| # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a |
| # Makefile in the HTML output directory. Running make will produce the docset in |
| # that directory and running make install will install the docset in |
| # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at |
| # startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html |
| # for more information. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| GENERATE_DOCSET = NO |
| |
| # This tag determines the name of the docset feed. A documentation feed provides |
| # an umbrella under which multiple documentation sets from a single provider |
| # (such as a company or product suite) can be grouped. |
| # The default value is: Doxygen generated docs. |
| # This tag requires that the tag GENERATE_DOCSET is set to YES. |
| |
| DOCSET_FEEDNAME = "Doxygen generated docs" |
| |
| # This tag specifies a string that should uniquely identify the documentation |
| # set bundle. This should be a reverse domain-name style string, e.g. |
| # com.mycompany.MyDocSet. Doxygen will append .docset to the name. |
| # The default value is: org.doxygen.Project. |
| # This tag requires that the tag GENERATE_DOCSET is set to YES. |
| |
| DOCSET_BUNDLE_ID = org.doxygen.Project |
| |
| # The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify |
| # the documentation publisher. This should be a reverse domain-name style |
| # string, e.g. com.mycompany.MyDocSet.documentation. |
| # The default value is: org.doxygen.Publisher. |
| # This tag requires that the tag GENERATE_DOCSET is set to YES. |
| |
| DOCSET_PUBLISHER_ID = org.doxygen.Publisher |
| |
| # The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. |
| # The default value is: Publisher. |
| # This tag requires that the tag GENERATE_DOCSET is set to YES. |
| |
| DOCSET_PUBLISHER_NAME = Publisher |
| |
| # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three |
| # additional HTML index files: index.hhp, index.hhc, and index.hhk. The |
| # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop |
| # (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on |
| # Windows. |
| # |
| # The HTML Help Workshop contains a compiler that can convert all HTML output |
| # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML |
| # files are now used as the Windows 98 help format, and will replace the old |
| # Windows help format (.hlp) on all Windows platforms in the future. Compressed |
| # HTML files also contain an index, a table of contents, and you can search for |
| # words in the documentation. The HTML workshop also contains a viewer for |
| # compressed HTML files. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| GENERATE_HTMLHELP = NO |
| |
| # The CHM_FILE tag can be used to specify the file name of the resulting .chm |
| # file. You can add a path in front of the file if the result should not be |
| # written to the html output directory. |
| # This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
| |
| CHM_FILE = |
| |
| # The HHC_LOCATION tag can be used to specify the location (absolute path |
| # including file name) of the HTML help compiler (hhc.exe). If non-empty, |
| # doxygen will try to run the HTML help compiler on the generated index.hhp. |
| # The file has to be specified with full path. |
| # This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
| |
| HHC_LOCATION = |
| |
| # The GENERATE_CHI flag controls if a separate .chi index file is generated |
| # (YES) or that it should be included in the master .chm file (NO). |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
| |
| GENERATE_CHI = NO |
| |
| # The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) |
| # and project file content. |
| # This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
| |
| CHM_INDEX_ENCODING = |
| |
| # The BINARY_TOC flag controls whether a binary table of contents is generated |
| # (YES) or a normal table of contents (NO) in the .chm file. Furthermore it |
| # enables the Previous and Next buttons. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
| |
| BINARY_TOC = NO |
| |
| # The TOC_EXPAND flag can be set to YES to add extra items for group members to |
| # the table of contents of the HTML help documentation and to the tree view. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
| |
| TOC_EXPAND = NO |
| |
| # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and |
| # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that |
| # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help |
| # (.qch) of the generated HTML documentation. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| GENERATE_QHP = NO |
| |
| # If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify |
| # the file name of the resulting .qch file. The path specified is relative to |
| # the HTML output folder. |
| # This tag requires that the tag GENERATE_QHP is set to YES. |
| |
| QCH_FILE = |
| |
| # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help |
| # Project output. For more information please see Qt Help Project / Namespace |
| # (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). |
| # The default value is: org.doxygen.Project. |
| # This tag requires that the tag GENERATE_QHP is set to YES. |
| |
| QHP_NAMESPACE = org.doxygen.Project |
| |
| # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt |
| # Help Project output. For more information please see Qt Help Project / Virtual |
| # Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- |
| # folders). |
| # The default value is: doc. |
| # This tag requires that the tag GENERATE_QHP is set to YES. |
| |
| QHP_VIRTUAL_FOLDER = doc |
| |
| # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom |
| # filter to add. For more information please see Qt Help Project / Custom |
| # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- |
| # filters). |
| # This tag requires that the tag GENERATE_QHP is set to YES. |
| |
| QHP_CUST_FILTER_NAME = |
| |
| # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the |
| # custom filter to add. For more information please see Qt Help Project / Custom |
| # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- |
| # filters). |
| # This tag requires that the tag GENERATE_QHP is set to YES. |
| |
| QHP_CUST_FILTER_ATTRS = |
| |
| # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this |
| # project's filter section matches. Qt Help Project / Filter Attributes (see: |
| # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). |
| # This tag requires that the tag GENERATE_QHP is set to YES. |
| |
| QHP_SECT_FILTER_ATTRS = |
| |
| # The QHG_LOCATION tag can be used to specify the location of Qt's |
| # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the |
| # generated .qhp file. |
| # This tag requires that the tag GENERATE_QHP is set to YES. |
| |
| QHG_LOCATION = |
| |
| # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be |
| # generated, together with the HTML files, they form an Eclipse help plugin. To |
| # install this plugin and make it available under the help contents menu in |
| # Eclipse, the contents of the directory containing the HTML and XML files needs |
| # to be copied into the plugins directory of eclipse. The name of the directory |
| # within the plugins directory should be the same as the ECLIPSE_DOC_ID value. |
| # After copying Eclipse needs to be restarted before the help appears. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| GENERATE_ECLIPSEHELP = NO |
| |
| # A unique identifier for the Eclipse help plugin. When installing the plugin |
| # the directory name containing the HTML and XML files should also have this |
| # name. Each documentation set should have its own identifier. |
| # The default value is: org.doxygen.Project. |
| # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. |
| |
| ECLIPSE_DOC_ID = org.doxygen.Project |
| |
| # If you want full control over the layout of the generated HTML pages it might |
| # be necessary to disable the index and replace it with your own. The |
| # DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top |
| # of each HTML page. A value of NO enables the index and the value YES disables |
| # it. Since the tabs in the index contain the same information as the navigation |
| # tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| DISABLE_INDEX = NO |
| |
| # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index |
| # structure should be generated to display hierarchical information. If the tag |
| # value is set to YES, a side panel will be generated containing a tree-like |
| # index structure (just like the one that is generated for HTML Help). For this |
| # to work a browser that supports JavaScript, DHTML, CSS and frames is required |
| # (i.e. any modern browser). Windows users are probably better off using the |
| # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can |
| # further fine-tune the look of the index. As an example, the default style |
| # sheet generated by doxygen has an example that shows how to put an image at |
| # the root of the tree instead of the PROJECT_NAME. Since the tree basically has |
| # the same information as the tab index, you could consider setting |
| # DISABLE_INDEX to YES when enabling this option. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| GENERATE_TREEVIEW = NO |
| |
| # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that |
| # doxygen will group on one line in the generated HTML documentation. |
| # |
| # Note that a value of 0 will completely suppress the enum values from appearing |
| # in the overview section. |
| # Minimum value: 0, maximum value: 20, default value: 4. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| ENUM_VALUES_PER_LINE = 4 |
| |
| # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used |
| # to set the initial width (in pixels) of the frame in which the tree is shown. |
| # Minimum value: 0, maximum value: 1500, default value: 250. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| TREEVIEW_WIDTH = 250 |
| |
| # If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to |
| # external symbols imported via tag files in a separate window. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| EXT_LINKS_IN_WINDOW = NO |
| |
| # Use this tag to change the font size of LaTeX formulas included as images in |
| # the HTML documentation. When you change the font size after a successful |
| # doxygen run you need to manually remove any form_*.png images from the HTML |
| # output directory to force them to be regenerated. |
| # Minimum value: 8, maximum value: 50, default value: 10. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| FORMULA_FONTSIZE = 10 |
| |
| # Use the FORMULA_TRANPARENT tag to determine whether or not the images |
| # generated for formulas are transparent PNGs. Transparent PNGs are not |
| # supported properly for IE 6.0, but are supported on all modern browsers. |
| # |
| # Note that when changing this option you need to delete any form_*.png files in |
| # the HTML output directory before the changes have effect. |
| # The default value is: YES. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| FORMULA_TRANSPARENT = YES |
| |
| # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see |
| # http://www.mathjax.org) which uses client side Javascript for the rendering |
| # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX |
| # installed or if you want to formulas look prettier in the HTML output. When |
| # enabled you may also need to install MathJax separately and configure the path |
| # to it using the MATHJAX_RELPATH option. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| USE_MATHJAX = NO |
| |
| # When MathJax is enabled you can set the default output format to be used for |
| # the MathJax output. See the MathJax site (see: |
| # http://docs.mathjax.org/en/latest/output.html) for more details. |
| # Possible values are: HTML-CSS (which is slower, but has the best |
| # compatibility), NativeMML (i.e. MathML) and SVG. |
| # The default value is: HTML-CSS. |
| # This tag requires that the tag USE_MATHJAX is set to YES. |
| |
| MATHJAX_FORMAT = HTML-CSS |
| |
| # When MathJax is enabled you need to specify the location relative to the HTML |
| # output directory using the MATHJAX_RELPATH option. The destination directory |
| # should contain the MathJax.js script. For instance, if the mathjax directory |
| # is located at the same level as the HTML output directory, then |
| # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax |
| # Content Delivery Network so you can quickly see the result without installing |
| # MathJax. However, it is strongly recommended to install a local copy of |
| # MathJax from http://www.mathjax.org before deployment. |
| # The default value is: http://cdn.mathjax.org/mathjax/latest. |
| # This tag requires that the tag USE_MATHJAX is set to YES. |
| |
| MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest |
| |
| # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax |
| # extension names that should be enabled during MathJax rendering. For example |
| # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols |
| # This tag requires that the tag USE_MATHJAX is set to YES. |
| |
| MATHJAX_EXTENSIONS = |
| |
| # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces |
| # of code that will be used on startup of the MathJax code. See the MathJax site |
| # (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an |
| # example see the documentation. |
| # This tag requires that the tag USE_MATHJAX is set to YES. |
| |
| MATHJAX_CODEFILE = |
| |
| # When the SEARCHENGINE tag is enabled doxygen will generate a search box for |
| # the HTML output. The underlying search engine uses javascript and DHTML and |
| # should work on any modern browser. Note that when using HTML help |
| # (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) |
| # there is already a search function so this one should typically be disabled. |
| # For large projects the javascript based search engine can be slow, then |
| # enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to |
| # search using the keyboard; to jump to the search box use <access key> + S |
| # (what the <access key> is depends on the OS and browser, but it is typically |
| # <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down |
| # key> to jump into the search results window, the results can be navigated |
| # using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel |
| # the search. The filter options can be selected when the cursor is inside the |
| # search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> |
| # to select a filter and <Enter> or <escape> to activate or cancel the filter |
| # option. |
| # The default value is: YES. |
| # This tag requires that the tag GENERATE_HTML is set to YES. |
| |
| SEARCHENGINE = YES |
| |
| # When the SERVER_BASED_SEARCH tag is enabled the search engine will be |
| # implemented using a web server instead of a web client using Javascript. There |
| # are two flavors of web server based searching depending on the EXTERNAL_SEARCH |
| # setting. When disabled, doxygen will generate a PHP script for searching and |
| # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing |
| # and searching needs to be provided by external tools. See the section |
| # "External Indexing and Searching" for details. |
| # The default value is: NO. |
| # This tag requires that the tag SEARCHENGINE is set to YES. |
| |
| SERVER_BASED_SEARCH = NO |
| |
| # When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP |
| # script for searching. Instead the search results are written to an XML file |
| # which needs to be processed by an external indexer. Doxygen will invoke an |
| # external search engine pointed to by the SEARCHENGINE_URL option to obtain the |
| # search results. |
| # |
| # Doxygen ships with an example indexer (doxyindexer) and search engine |
| # (doxysearch.cgi) which are based on the open source search engine library |
| # Xapian (see: http://xapian.org/). |
| # |
| # See the section "External Indexing and Searching" for details. |
| # The default value is: NO. |
| # This tag requires that the tag SEARCHENGINE is set to YES. |
| |
| EXTERNAL_SEARCH = NO |
| |
| # The SEARCHENGINE_URL should point to a search engine hosted by a web server |
| # which will return the search results when EXTERNAL_SEARCH is enabled. |
| # |
| # Doxygen ships with an example indexer (doxyindexer) and search engine |
| # (doxysearch.cgi) which are based on the open source search engine library |
| # Xapian (see: http://xapian.org/). See the section "External Indexing and |
| # Searching" for details. |
| # This tag requires that the tag SEARCHENGINE is set to YES. |
| |
| SEARCHENGINE_URL = |
| |
| # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed |
| # search data is written to a file for indexing by an external tool. With the |
| # SEARCHDATA_FILE tag the name of this file can be specified. |
| # The default file is: searchdata.xml. |
| # This tag requires that the tag SEARCHENGINE is set to YES. |
| |
| SEARCHDATA_FILE = searchdata.xml |
| |
| # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the |
| # EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is |
| # useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple |
| # projects and redirect the results back to the right project. |
| # This tag requires that the tag SEARCHENGINE is set to YES. |
| |
| EXTERNAL_SEARCH_ID = |
| |
| # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen |
| # projects other than the one defined by this configuration file, but that are |
| # all added to the same external search index. Each project needs to have a |
| # unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of |
| # to a relative location where the documentation can be found. The format is: |
| # EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... |
| # This tag requires that the tag SEARCHENGINE is set to YES. |
| |
| EXTRA_SEARCH_MAPPINGS = |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the LaTeX output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. |
| # The default value is: YES. |
| |
| GENERATE_LATEX = NO |
| |
| # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a |
| # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of |
| # it. |
| # The default directory is: latex. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| LATEX_OUTPUT = latex |
| |
| # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be |
| # invoked. |
| # |
| # Note that when enabling USE_PDFLATEX this option is only used for generating |
| # bitmaps for formulas in the HTML output, but not in the Makefile that is |
| # written to the output directory. |
| # The default file is: latex. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| LATEX_CMD_NAME = latex |
| |
| # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate |
| # index for LaTeX. |
| # The default file is: makeindex. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| MAKEINDEX_CMD_NAME = makeindex |
| |
| # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX |
| # documents. This may be useful for small projects and may help to save some |
| # trees in general. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| COMPACT_LATEX = NO |
| |
| # The PAPER_TYPE tag can be used to set the paper type that is used by the |
| # printer. |
| # Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x |
| # 14 inches) and executive (7.25 x 10.5 inches). |
| # The default value is: a4. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| PAPER_TYPE = a4 |
| |
| # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names |
| # that should be included in the LaTeX output. To get the times font for |
| # instance you can specify |
| # EXTRA_PACKAGES=times |
| # If left blank no extra packages will be included. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| EXTRA_PACKAGES = |
| |
| # The LATEX_HEADER tag can be used to specify a personal LaTeX header for the |
| # generated LaTeX document. The header should contain everything until the first |
| # chapter. If it is left blank doxygen will generate a standard header. See |
| # section "Doxygen usage" for information on how to let doxygen write the |
| # default header to a separate file. |
| # |
| # Note: Only use a user-defined header if you know what you are doing! The |
| # following commands have a special meaning inside the header: $title, |
| # $datetime, $date, $doxygenversion, $projectname, $projectnumber, |
| # $projectbrief, $projectlogo. Doxygen will replace $title with the empty |
| # string, for the replacement values of the other commands the user is referred |
| # to HTML_HEADER. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| LATEX_HEADER = |
| |
| # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the |
| # generated LaTeX document. The footer should contain everything after the last |
| # chapter. If it is left blank doxygen will generate a standard footer. See |
| # LATEX_HEADER for more information on how to generate a default footer and what |
| # special commands can be used inside the footer. |
| # |
| # Note: Only use a user-defined footer if you know what you are doing! |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| LATEX_FOOTER = |
| |
| # The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined |
| # LaTeX style sheets that are included after the standard style sheets created |
| # by doxygen. Using this option one can overrule certain style aspects. Doxygen |
| # will copy the style sheet files to the output directory. |
| # Note: The order of the extra style sheet files is of importance (e.g. the last |
| # style sheet in the list overrules the setting of the previous ones in the |
| # list). |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| LATEX_EXTRA_STYLESHEET = |
| |
| # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or |
| # other source files which should be copied to the LATEX_OUTPUT output |
| # directory. Note that the files will be copied as-is; there are no commands or |
| # markers available. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| LATEX_EXTRA_FILES = |
| |
| # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is |
| # prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will |
| # contain links (just like the HTML output) instead of page references. This |
| # makes the output suitable for online browsing using a PDF viewer. |
| # The default value is: YES. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| PDF_HYPERLINKS = YES |
| |
| # If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate |
| # the PDF file directly from the LaTeX files. Set this option to YES, to get a |
| # higher quality PDF documentation. |
| # The default value is: YES. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| USE_PDFLATEX = YES |
| |
| # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode |
| # command to the generated LaTeX files. This will instruct LaTeX to keep running |
| # if errors occur, instead of asking the user for help. This option is also used |
| # when generating formulas in HTML. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| LATEX_BATCHMODE = NO |
| |
| # If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the |
| # index chapters (such as File Index, Compound Index, etc.) in the output. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| LATEX_HIDE_INDICES = NO |
| |
| # If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source |
| # code with syntax highlighting in the LaTeX output. |
| # |
| # Note that which sources are shown also depends on other settings such as |
| # SOURCE_BROWSER. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| LATEX_SOURCE_CODE = NO |
| |
| # The LATEX_BIB_STYLE tag can be used to specify the style to use for the |
| # bibliography, e.g. plainnat, or ieeetr. See |
| # http://en.wikipedia.org/wiki/BibTeX and \cite for more info. |
| # The default value is: plain. |
| # This tag requires that the tag GENERATE_LATEX is set to YES. |
| |
| LATEX_BIB_STYLE = plain |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the RTF output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The |
| # RTF output is optimized for Word 97 and may not look too pretty with other RTF |
| # readers/editors. |
| # The default value is: NO. |
| |
| GENERATE_RTF = NO |
| |
| # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a |
| # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of |
| # it. |
| # The default directory is: rtf. |
| # This tag requires that the tag GENERATE_RTF is set to YES. |
| |
| RTF_OUTPUT = rtf |
| |
| # If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF |
| # documents. This may be useful for small projects and may help to save some |
| # trees in general. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_RTF is set to YES. |
| |
| COMPACT_RTF = NO |
| |
| # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will |
| # contain hyperlink fields. The RTF file will contain links (just like the HTML |
| # output) instead of page references. This makes the output suitable for online |
| # browsing using Word or some other Word compatible readers that support those |
| # fields. |
| # |
| # Note: WordPad (write) and others do not support links. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_RTF is set to YES. |
| |
| RTF_HYPERLINKS = NO |
| |
| # Load stylesheet definitions from file. Syntax is similar to doxygen's config |
| # file, i.e. a series of assignments. You only have to provide replacements, |
| # missing definitions are set to their default value. |
| # |
| # See also section "Doxygen usage" for information on how to generate the |
| # default style sheet that doxygen normally uses. |
| # This tag requires that the tag GENERATE_RTF is set to YES. |
| |
| RTF_STYLESHEET_FILE = |
| |
| # Set optional variables used in the generation of an RTF document. Syntax is |
| # similar to doxygen's config file. A template extensions file can be generated |
| # using doxygen -e rtf extensionFile. |
| # This tag requires that the tag GENERATE_RTF is set to YES. |
| |
| RTF_EXTENSIONS_FILE = |
| |
| # If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code |
| # with syntax highlighting in the RTF output. |
| # |
| # Note that which sources are shown also depends on other settings such as |
| # SOURCE_BROWSER. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_RTF is set to YES. |
| |
| RTF_SOURCE_CODE = NO |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the man page output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for |
| # classes and files. |
| # The default value is: NO. |
| |
| GENERATE_MAN = NO |
| |
| # The MAN_OUTPUT tag is used to specify where the man pages will be put. If a |
| # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of |
| # it. A directory man3 will be created inside the directory specified by |
| # MAN_OUTPUT. |
| # The default directory is: man. |
| # This tag requires that the tag GENERATE_MAN is set to YES. |
| |
| MAN_OUTPUT = man |
| |
| # The MAN_EXTENSION tag determines the extension that is added to the generated |
| # man pages. In case the manual section does not start with a number, the number |
| # 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is |
| # optional. |
| # The default value is: .3. |
| # This tag requires that the tag GENERATE_MAN is set to YES. |
| |
| MAN_EXTENSION = .3 |
| |
| # The MAN_SUBDIR tag determines the name of the directory created within |
| # MAN_OUTPUT in which the man pages are placed. If defaults to man followed by |
| # MAN_EXTENSION with the initial . removed. |
| # This tag requires that the tag GENERATE_MAN is set to YES. |
| |
| MAN_SUBDIR = |
| |
| # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it |
| # will generate one additional man file for each entity documented in the real |
| # man page(s). These additional files only source the real man page, but without |
| # them the man command would be unable to find the correct page. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_MAN is set to YES. |
| |
| MAN_LINKS = NO |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the XML output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that |
| # captures the structure of the code including all documentation. |
| # The default value is: NO. |
| |
| GENERATE_XML = NO |
| |
| # The XML_OUTPUT tag is used to specify where the XML pages will be put. If a |
| # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of |
| # it. |
| # The default directory is: xml. |
| # This tag requires that the tag GENERATE_XML is set to YES. |
| |
| XML_OUTPUT = xml |
| |
| # If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program |
| # listings (including syntax highlighting and cross-referencing information) to |
| # the XML output. Note that enabling this will significantly increase the size |
| # of the XML output. |
| # The default value is: YES. |
| # This tag requires that the tag GENERATE_XML is set to YES. |
| |
| XML_PROGRAMLISTING = YES |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the DOCBOOK output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files |
| # that can be used to generate PDF. |
| # The default value is: NO. |
| |
| GENERATE_DOCBOOK = NO |
| |
| # The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. |
| # If a relative path is entered the value of OUTPUT_DIRECTORY will be put in |
| # front of it. |
| # The default directory is: docbook. |
| # This tag requires that the tag GENERATE_DOCBOOK is set to YES. |
| |
| DOCBOOK_OUTPUT = docbook |
| |
| # If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the |
| # program listings (including syntax highlighting and cross-referencing |
| # information) to the DOCBOOK output. Note that enabling this will significantly |
| # increase the size of the DOCBOOK output. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_DOCBOOK is set to YES. |
| |
| DOCBOOK_PROGRAMLISTING = NO |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options for the AutoGen Definitions output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an |
| # AutoGen Definitions (see http://autogen.sf.net) file that captures the |
| # structure of the code including all documentation. Note that this feature is |
| # still experimental and incomplete at the moment. |
| # The default value is: NO. |
| |
| GENERATE_AUTOGEN_DEF = NO |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the Perl module output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module |
| # file that captures the structure of the code including all documentation. |
| # |
| # Note that this feature is still experimental and incomplete at the moment. |
| # The default value is: NO. |
| |
| GENERATE_PERLMOD = NO |
| |
| # If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary |
| # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI |
| # output from the Perl module output. |
| # The default value is: NO. |
| # This tag requires that the tag GENERATE_PERLMOD is set to YES. |
| |
| PERLMOD_LATEX = NO |
| |
| # If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely |
| # formatted so it can be parsed by a human reader. This is useful if you want to |
| # understand what is going on. On the other hand, if this tag is set to NO, the |
| # size of the Perl module output will be much smaller and Perl will parse it |
| # just the same. |
| # The default value is: YES. |
| # This tag requires that the tag GENERATE_PERLMOD is set to YES. |
| |
| PERLMOD_PRETTY = YES |
| |
| # The names of the make variables in the generated doxyrules.make file are |
| # prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful |
| # so different doxyrules.make files included by the same Makefile don't |
| # overwrite each other's variables. |
| # This tag requires that the tag GENERATE_PERLMOD is set to YES. |
| |
| PERLMOD_MAKEVAR_PREFIX = |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the preprocessor |
| #--------------------------------------------------------------------------- |
| |
| # If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all |
| # C-preprocessor directives found in the sources and include files. |
| # The default value is: YES. |
| |
| ENABLE_PREPROCESSING = YES |
| |
| # If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names |
| # in the source code. If set to NO, only conditional compilation will be |
| # performed. Macro expansion can be done in a controlled way by setting |
| # EXPAND_ONLY_PREDEF to YES. |
| # The default value is: NO. |
| # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
| |
| MACRO_EXPANSION = YES |
| |
| # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then |
| # the macro expansion is limited to the macros specified with the PREDEFINED and |
| # EXPAND_AS_DEFINED tags. |
| # The default value is: NO. |
| # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
| |
| EXPAND_ONLY_PREDEF = NO |
| |
| # If the SEARCH_INCLUDES tag is set to YES, the include files in the |
| # INCLUDE_PATH will be searched if a #include is found. |
| # The default value is: YES. |
| # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
| |
| SEARCH_INCLUDES = YES |
| |
| # The INCLUDE_PATH tag can be used to specify one or more directories that |
| # contain include files that are not input files but should be processed by the |
| # preprocessor. |
| # This tag requires that the tag SEARCH_INCLUDES is set to YES. |
| |
| INCLUDE_PATH = |
| |
| # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard |
| # patterns (like *.h and *.hpp) to filter out the header-files in the |
| # directories. If left blank, the patterns specified with FILE_PATTERNS will be |
| # used. |
| # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
| |
| INCLUDE_FILE_PATTERNS = |
| |
| # The PREDEFINED tag can be used to specify one or more macro names that are |
| # defined before the preprocessor is started (similar to the -D option of e.g. |
| # gcc). The argument of the tag is a list of macros of the form: name or |
| # name=definition (no spaces). If the definition and the "=" are omitted, "=1" |
| # is assumed. To prevent a macro definition from being undefined via #undef or |
| # recursively expanded use the := operator instead of the = operator. |
| # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
| |
| PREDEFINED = GRPC_FINAL= GRPC_OVERIDE= |
| |
| # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this |
| # tag can be used to specify a list of macro names that should be expanded. The |
| # macro definition that is found in the sources will be used. Use the PREDEFINED |
| # tag if you want to use a different macro definition that overrules the |
| # definition found in the source code. |
| # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
| |
| EXPAND_AS_DEFINED = |
| |
| # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will |
| # remove all references to function-like macros that are alone on a line, have |
| # an all uppercase name, and do not end with a semicolon. Such function macros |
| # are typically used for boiler-plate code, and will confuse the parser if not |
| # removed. |
| # The default value is: YES. |
| # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
| |
| SKIP_FUNCTION_MACROS = YES |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to external references |
| #--------------------------------------------------------------------------- |
| |
| # The TAGFILES tag can be used to specify one or more tag files. For each tag |
| # file the location of the external documentation should be added. The format of |
| # a tag file without this location is as follows: |
| # TAGFILES = file1 file2 ... |
| # Adding location for the tag files is done as follows: |
| # TAGFILES = file1=loc1 "file2 = loc2" ... |
| # where loc1 and loc2 can be relative or absolute paths or URLs. See the |
| # section "Linking to external documentation" for more information about the use |
| # of tag files. |
| # Note: Each tag file must have a unique name (where the name does NOT include |
| # the path). If a tag file is not located in the directory in which doxygen is |
| # run, you must also specify the path to the tagfile here. |
| |
| TAGFILES = |
| |
| # When a file name is specified after GENERATE_TAGFILE, doxygen will create a |
| # tag file that is based on the input files it reads. See section "Linking to |
| # external documentation" for more information about the usage of tag files. |
| |
| GENERATE_TAGFILE = |
| |
| # If the ALLEXTERNALS tag is set to YES, all external class will be listed in |
| # the class index. If set to NO, only the inherited external classes will be |
| # listed. |
| # The default value is: NO. |
| |
| ALLEXTERNALS = NO |
| |
| # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed |
| # in the modules index. If set to NO, only the current project's groups will be |
| # listed. |
| # The default value is: YES. |
| |
| EXTERNAL_GROUPS = YES |
| |
| # If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in |
| # the related pages index. If set to NO, only the current project's pages will |
| # be listed. |
| # The default value is: YES. |
| |
| EXTERNAL_PAGES = YES |
| |
| # The PERL_PATH should be the absolute path and name of the perl script |
| # interpreter (i.e. the result of 'which perl'). |
| # The default file (with absolute path) is: /usr/bin/perl. |
| |
| PERL_PATH = /usr/bin/perl |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the dot tool |
| #--------------------------------------------------------------------------- |
| |
| # If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram |
| # (in HTML and LaTeX) for classes with base or super classes. Setting the tag to |
| # NO turns the diagrams off. Note that this option also works with HAVE_DOT |
| # disabled, but it is recommended to install and use dot, since it yields more |
| # powerful graphs. |
| # The default value is: YES. |
| |
| CLASS_DIAGRAMS = YES |
| |
| # You can define message sequence charts within doxygen comments using the \msc |
| # command. Doxygen will then run the mscgen tool (see: |
| # http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the |
| # documentation. The MSCGEN_PATH tag allows you to specify the directory where |
| # the mscgen tool resides. If left empty the tool is assumed to be found in the |
| # default search path. |
| |
| MSCGEN_PATH = |
| |
| # You can include diagrams made with dia in doxygen documentation. Doxygen will |
| # then run dia to produce the diagram and insert it in the documentation. The |
| # DIA_PATH tag allows you to specify the directory where the dia binary resides. |
| # If left empty dia is assumed to be found in the default search path. |
| |
| DIA_PATH = |
| |
| # If set to YES the inheritance and collaboration graphs will hide inheritance |
| # and usage relations if the target is undocumented or is not a class. |
| # The default value is: YES. |
| |
| HIDE_UNDOC_RELATIONS = YES |
| |
| # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is |
| # available from the path. This tool is part of Graphviz (see: |
| # http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent |
| # Bell Labs. The other options in this section have no effect if this option is |
| # set to NO |
| # The default value is: NO. |
| |
| HAVE_DOT = YES |
| |
| # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed |
| # to run in parallel. When set to 0 doxygen will base this on the number of |
| # processors available in the system. You can set it explicitly to a value |
| # larger than 0 to get control over the balance between CPU load and processing |
| # speed. |
| # Minimum value: 0, maximum value: 32, default value: 0. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DOT_NUM_THREADS = 0 |
| |
| # When you want a differently looking font in the dot files that doxygen |
| # generates you can specify the font name using DOT_FONTNAME. You need to make |
| # sure dot is able to find the font, which can be done by putting it in a |
| # standard location or by setting the DOTFONTPATH environment variable or by |
| # setting DOT_FONTPATH to the directory containing the font. |
| # The default value is: Helvetica. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DOT_FONTNAME = Helvetica |
| |
| # The DOT_FONTSIZE tag can be used to set the size (in points) of the font of |
| # dot graphs. |
| # Minimum value: 4, maximum value: 24, default value: 10. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DOT_FONTSIZE = 10 |
| |
| # By default doxygen will tell dot to use the default font as specified with |
| # DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set |
| # the path where dot can find it using this tag. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DOT_FONTPATH = |
| |
| # If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for |
| # each documented class showing the direct and indirect inheritance relations. |
| # Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. |
| # The default value is: YES. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| CLASS_GRAPH = NO |
| |
| # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a |
| # graph for each documented class showing the direct and indirect implementation |
| # dependencies (inheritance, containment, and class references variables) of the |
| # class with other documented classes. |
| # The default value is: YES. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| COLLABORATION_GRAPH = NO |
| |
| # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for |
| # groups, showing the direct groups dependencies. |
| # The default value is: YES. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| GROUP_GRAPHS = NO |
| |
| # If the UML_LOOK tag is set to YES, doxygen will generate inheritance and |
| # collaboration diagrams in a style similar to the OMG's Unified Modeling |
| # Language. |
| # The default value is: NO. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| UML_LOOK = NO |
| |
| # If the UML_LOOK tag is enabled, the fields and methods are shown inside the |
| # class node. If there are many fields or methods and many nodes the graph may |
| # become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the |
| # number of items for each type to make the size more manageable. Set this to 0 |
| # for no limit. Note that the threshold may be exceeded by 50% before the limit |
| # is enforced. So when you set the threshold to 10, up to 15 fields may appear, |
| # but if the number exceeds 15, the total amount of fields shown is limited to |
| # 10. |
| # Minimum value: 0, maximum value: 100, default value: 10. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| UML_LIMIT_NUM_FIELDS = 10 |
| |
| # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and |
| # collaboration graphs will show the relations between templates and their |
| # instances. |
| # The default value is: NO. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| TEMPLATE_RELATIONS = NO |
| |
| # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to |
| # YES then doxygen will generate a graph for each documented file showing the |
| # direct and indirect include dependencies of the file with other documented |
| # files. |
| # The default value is: YES. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| INCLUDE_GRAPH = NO |
| |
| # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are |
| # set to YES then doxygen will generate a graph for each documented file showing |
| # the direct and indirect include dependencies of the file with other documented |
| # files. |
| # The default value is: YES. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| INCLUDED_BY_GRAPH = NO |
| |
| # If the CALL_GRAPH tag is set to YES then doxygen will generate a call |
| # dependency graph for every global function or class method. |
| # |
| # Note that enabling this option will significantly increase the time of a run. |
| # So in most cases it will be better to enable call graphs for selected |
| # functions only using the \callgraph command. |
| # The default value is: NO. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| CALL_GRAPH = NO |
| |
| # If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller |
| # dependency graph for every global function or class method. |
| # |
| # Note that enabling this option will significantly increase the time of a run. |
| # So in most cases it will be better to enable caller graphs for selected |
| # functions only using the \callergraph command. |
| # The default value is: NO. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| CALLER_GRAPH = NO |
| |
| # If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical |
| # hierarchy of all classes instead of a textual one. |
| # The default value is: YES. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| GRAPHICAL_HIERARCHY = NO |
| |
| # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the |
| # dependencies a directory has on other directories in a graphical way. The |
| # dependency relations are determined by the #include relations between the |
| # files in the directories. |
| # The default value is: YES. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DIRECTORY_GRAPH = NO |
| |
| # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images |
| # generated by dot. |
| # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order |
| # to make the SVG files visible in IE 9+ (other browsers do not have this |
| # requirement). |
| # Possible values are: png, jpg, gif and svg. |
| # The default value is: png. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DOT_IMAGE_FORMAT = png |
| |
| # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to |
| # enable generation of interactive SVG images that allow zooming and panning. |
| # |
| # Note that this requires a modern browser other than Internet Explorer. Tested |
| # and working are Firefox, Chrome, Safari, and Opera. |
| # Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make |
| # the SVG files visible. Older versions of IE do not have SVG support. |
| # The default value is: NO. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| INTERACTIVE_SVG = NO |
| |
| # The DOT_PATH tag can be used to specify the path where the dot tool can be |
| # found. If left blank, it is assumed the dot tool can be found in the path. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DOT_PATH = |
| |
| # The DOTFILE_DIRS tag can be used to specify one or more directories that |
| # contain dot files that are included in the documentation (see the \dotfile |
| # command). |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DOTFILE_DIRS = |
| |
| # The MSCFILE_DIRS tag can be used to specify one or more directories that |
| # contain msc files that are included in the documentation (see the \mscfile |
| # command). |
| |
| MSCFILE_DIRS = |
| |
| # The DIAFILE_DIRS tag can be used to specify one or more directories that |
| # contain dia files that are included in the documentation (see the \diafile |
| # command). |
| |
| DIAFILE_DIRS = |
| |
| # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the |
| # path where java can find the plantuml.jar file. If left blank, it is assumed |
| # PlantUML is not used or called during a preprocessing step. Doxygen will |
| # generate a warning when it encounters a \startuml command in this case and |
| # will not generate output for the diagram. |
| |
| PLANTUML_JAR_PATH = |
| |
| # When using plantuml, the specified paths are searched for files specified by |
| # the !include statement in a plantuml block. |
| |
| PLANTUML_INCLUDE_PATH = |
| |
| # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes |
| # that will be shown in the graph. If the number of nodes in a graph becomes |
| # larger than this value, doxygen will truncate the graph, which is visualized |
| # by representing a node as a red box. Note that doxygen if the number of direct |
| # children of the root node in a graph is already larger than |
| # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that |
| # the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. |
| # Minimum value: 0, maximum value: 10000, default value: 50. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DOT_GRAPH_MAX_NODES = 50 |
| |
| # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs |
| # generated by dot. A depth value of 3 means that only nodes reachable from the |
| # root by following a path via at most 3 edges will be shown. Nodes that lay |
| # further from the root node will be omitted. Note that setting this option to 1 |
| # or 2 may greatly reduce the computation time needed for large code bases. Also |
| # note that the size of a graph can be further restricted by |
| # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. |
| # Minimum value: 0, maximum value: 1000, default value: 0. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| MAX_DOT_GRAPH_DEPTH = 0 |
| |
| # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent |
| # background. This is disabled by default, because dot on Windows does not seem |
| # to support this out of the box. |
| # |
| # Warning: Depending on the platform used, enabling this option may lead to |
| # badly anti-aliased labels on the edges of a graph (i.e. they become hard to |
| # read). |
| # The default value is: NO. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DOT_TRANSPARENT = NO |
| |
| # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output |
| # files in one run (i.e. multiple -o and -T options on the command line). This |
| # makes dot run faster, but since only newer versions of dot (>1.8.10) support |
| # this, this feature is disabled by default. |
| # The default value is: NO. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DOT_MULTI_TARGETS = NO |
| |
| # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page |
| # explaining the meaning of the various boxes and arrows in the dot generated |
| # graphs. |
| # The default value is: YES. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| GENERATE_LEGEND = YES |
| |
| # If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot |
| # files that are used to generate the various graphs. |
| # The default value is: YES. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| |
| DOT_CLEANUP = YES |
| |