| // © 2016 and later: Unicode, Inc. and others. |
| // License & terms of use: http://www.unicode.org/copyright.html |
| /* |
| ****************************************************************************** |
| * |
| * Copyright (C) 2007-2012, International Business Machines |
| * Corporation and others. All Rights Reserved. |
| * |
| ****************************************************************************** |
| * file name: bmpset.cpp |
| * encoding: UTF-8 |
| * tab size: 8 (not used) |
| * indentation:4 |
| * |
| * created on: 2007jan29 |
| * created by: Markus W. Scherer |
| */ |
| |
| #include "unicode/utypes.h" |
| #include "unicode/uniset.h" |
| #include "unicode/utf8.h" |
| #include "unicode/utf16.h" |
| #include "cmemory.h" |
| #include "bmpset.h" |
| #include "uassert.h" |
| |
| U_NAMESPACE_BEGIN |
| |
| BMPSet::BMPSet(const int32_t *parentList, int32_t parentListLength) : |
| list(parentList), listLength(parentListLength) { |
| uprv_memset(asciiBytes, 0, sizeof(asciiBytes)); |
| uprv_memset(table7FF, 0, sizeof(table7FF)); |
| uprv_memset(bmpBlockBits, 0, sizeof(bmpBlockBits)); |
| |
| /* |
| * Set the list indexes for binary searches for |
| * U+0800, U+1000, U+2000, .., U+F000, U+10000. |
| * U+0800 is the first 3-byte-UTF-8 code point. Lower code points are |
| * looked up in the bit tables. |
| * The last pair of indexes is for finding supplementary code points. |
| */ |
| list4kStarts[0]=findCodePoint(0x800, 0, listLength-1); |
| int32_t i; |
| for(i=1; i<=0x10; ++i) { |
| list4kStarts[i]=findCodePoint(i<<12, list4kStarts[i-1], listLength-1); |
| } |
| list4kStarts[0x11]=listLength-1; |
| |
| initBits(); |
| overrideIllegal(); |
| } |
| |
| BMPSet::BMPSet(const BMPSet &otherBMPSet, const int32_t *newParentList, int32_t newParentListLength) : |
| list(newParentList), listLength(newParentListLength) { |
| uprv_memcpy(asciiBytes, otherBMPSet.asciiBytes, sizeof(asciiBytes)); |
| uprv_memcpy(table7FF, otherBMPSet.table7FF, sizeof(table7FF)); |
| uprv_memcpy(bmpBlockBits, otherBMPSet.bmpBlockBits, sizeof(bmpBlockBits)); |
| uprv_memcpy(list4kStarts, otherBMPSet.list4kStarts, sizeof(list4kStarts)); |
| } |
| |
| BMPSet::~BMPSet() { |
| } |
| |
| /* |
| * Set bits in a bit rectangle in "vertical" bit organization. |
| * start<limit<=0x800 |
| */ |
| static void set32x64Bits(uint32_t table[64], int32_t start, int32_t limit) { |
| U_ASSERT(start<limit); |
| U_ASSERT(limit<=0x800); |
| |
| int32_t lead=start>>6; // Named for UTF-8 2-byte lead byte with upper 5 bits. |
| int32_t trail=start&0x3f; // Named for UTF-8 2-byte trail byte with lower 6 bits. |
| |
| // Set one bit indicating an all-one block. |
| uint32_t bits=(uint32_t)1<<lead; |
| if((start+1)==limit) { // Single-character shortcut. |
| table[trail]|=bits; |
| return; |
| } |
| |
| int32_t limitLead=limit>>6; |
| int32_t limitTrail=limit&0x3f; |
| |
| if(lead==limitLead) { |
| // Partial vertical bit column. |
| while(trail<limitTrail) { |
| table[trail++]|=bits; |
| } |
| } else { |
| // Partial vertical bit column, |
| // followed by a bit rectangle, |
| // followed by another partial vertical bit column. |
| if(trail>0) { |
| do { |
| table[trail++]|=bits; |
| } while(trail<64); |
| ++lead; |
| } |
| if(lead<limitLead) { |
| bits=~((1<<lead)-1); |
| if(limitLead<0x20) { |
| bits&=(1<<limitLead)-1; |
| } |
| for(trail=0; trail<64; ++trail) { |
| table[trail]|=bits; |
| } |
| } |
| // limit<=0x800. If limit==0x800 then limitLead=32 and limitTrail=0. |
| // In that case, bits=1<<limitLead is undefined but the bits value |
| // is not used because trail<limitTrail is already false. |
| bits=(uint32_t)1<<((limitLead == 0x20) ? (limitLead - 1) : limitLead); |
| for(trail=0; trail<limitTrail; ++trail) { |
| table[trail]|=bits; |
| } |
| } |
| } |
| |
| void BMPSet::initBits() { |
| UChar32 start, limit; |
| int32_t listIndex=0; |
| |
| // Set asciiBytes[]. |
| do { |
| start=list[listIndex++]; |
| if(listIndex<listLength) { |
| limit=list[listIndex++]; |
| } else { |
| limit=0x110000; |
| } |
| if(start>=0x80) { |
| break; |
| } |
| do { |
| asciiBytes[start++]=1; |
| } while(start<limit && start<0x80); |
| } while(limit<=0x80); |
| |
| // Set table7FF[]. |
| while(start<0x800) { |
| set32x64Bits(table7FF, start, limit<=0x800 ? limit : 0x800); |
| if(limit>0x800) { |
| start=0x800; |
| break; |
| } |
| |
| start=list[listIndex++]; |
| if(listIndex<listLength) { |
| limit=list[listIndex++]; |
| } else { |
| limit=0x110000; |
| } |
| } |
| |
| // Set bmpBlockBits[]. |
| int32_t minStart=0x800; |
| while(start<0x10000) { |
| if(limit>0x10000) { |
| limit=0x10000; |
| } |
| |
| if(start<minStart) { |
| start=minStart; |
| } |
| if(start<limit) { // Else: Another range entirely in a known mixed-value block. |
| if(start&0x3f) { |
| // Mixed-value block of 64 code points. |
| start>>=6; |
| bmpBlockBits[start&0x3f]|=0x10001<<(start>>6); |
| start=(start+1)<<6; // Round up to the next block boundary. |
| minStart=start; // Ignore further ranges in this block. |
| } |
| if(start<limit) { |
| if(start<(limit&~0x3f)) { |
| // Multiple all-ones blocks of 64 code points each. |
| set32x64Bits(bmpBlockBits, start>>6, limit>>6); |
| } |
| |
| if(limit&0x3f) { |
| // Mixed-value block of 64 code points. |
| limit>>=6; |
| bmpBlockBits[limit&0x3f]|=0x10001<<(limit>>6); |
| limit=(limit+1)<<6; // Round up to the next block boundary. |
| minStart=limit; // Ignore further ranges in this block. |
| } |
| } |
| } |
| |
| if(limit==0x10000) { |
| break; |
| } |
| |
| start=list[listIndex++]; |
| if(listIndex<listLength) { |
| limit=list[listIndex++]; |
| } else { |
| limit=0x110000; |
| } |
| } |
| } |
| |
| /* |
| * Override some bits and bytes to the result of contains(FFFD) |
| * for faster validity checking at runtime. |
| * No need to set 0 values where they were reset to 0 in the constructor |
| * and not modified by initBits(). |
| * (asciiBytes[] trail bytes, table7FF[] 0..7F, bmpBlockBits[] 0..7FF) |
| * Need to set 0 values for surrogates D800..DFFF. |
| */ |
| void BMPSet::overrideIllegal() { |
| uint32_t bits, mask; |
| int32_t i; |
| |
| if(containsSlow(0xfffd, list4kStarts[0xf], list4kStarts[0x10])) { |
| // contains(FFFD)==TRUE |
| for(i=0x80; i<0xc0; ++i) { |
| asciiBytes[i]=1; |
| } |
| |
| bits=3; // Lead bytes 0xC0 and 0xC1. |
| for(i=0; i<64; ++i) { |
| table7FF[i]|=bits; |
| } |
| |
| bits=1; // Lead byte 0xE0. |
| for(i=0; i<32; ++i) { // First half of 4k block. |
| bmpBlockBits[i]|=bits; |
| } |
| |
| mask=~(0x10001<<0xd); // Lead byte 0xED. |
| bits=1<<0xd; |
| for(i=32; i<64; ++i) { // Second half of 4k block. |
| bmpBlockBits[i]=(bmpBlockBits[i]&mask)|bits; |
| } |
| } else { |
| // contains(FFFD)==FALSE |
| mask=~(0x10001<<0xd); // Lead byte 0xED. |
| for(i=32; i<64; ++i) { // Second half of 4k block. |
| bmpBlockBits[i]&=mask; |
| } |
| } |
| } |
| |
| int32_t BMPSet::findCodePoint(UChar32 c, int32_t lo, int32_t hi) const { |
| /* Examples: |
| findCodePoint(c) |
| set list[] c=0 1 3 4 7 8 |
| === ============== =========== |
| [] [110000] 0 0 0 0 0 0 |
| [\u0000-\u0003] [0, 4, 110000] 1 1 1 2 2 2 |
| [\u0004-\u0007] [4, 8, 110000] 0 0 0 1 1 2 |
| [:Any:] [0, 110000] 1 1 1 1 1 1 |
| */ |
| |
| // Return the smallest i such that c < list[i]. Assume |
| // list[len - 1] == HIGH and that c is legal (0..HIGH-1). |
| if (c < list[lo]) |
| return lo; |
| // High runner test. c is often after the last range, so an |
| // initial check for this condition pays off. |
| if (lo >= hi || c >= list[hi-1]) |
| return hi; |
| // invariant: c >= list[lo] |
| // invariant: c < list[hi] |
| for (;;) { |
| int32_t i = (lo + hi) >> 1; |
| if (i == lo) { |
| break; // Found! |
| } else if (c < list[i]) { |
| hi = i; |
| } else { |
| lo = i; |
| } |
| } |
| return hi; |
| } |
| |
| UBool |
| BMPSet::contains(UChar32 c) const { |
| if((uint32_t)c<=0x7f) { |
| return (UBool)asciiBytes[c]; |
| } else if((uint32_t)c<=0x7ff) { |
| return (UBool)((table7FF[c&0x3f]&((uint32_t)1<<(c>>6)))!=0); |
| } else if((uint32_t)c<0xd800 || (c>=0xe000 && c<=0xffff)) { |
| int lead=c>>12; |
| uint32_t twoBits=(bmpBlockBits[(c>>6)&0x3f]>>lead)&0x10001; |
| if(twoBits<=1) { |
| // All 64 code points with the same bits 15..6 |
| // are either in the set or not. |
| return (UBool)twoBits; |
| } else { |
| // Look up the code point in its 4k block of code points. |
| return containsSlow(c, list4kStarts[lead], list4kStarts[lead+1]); |
| } |
| } else if((uint32_t)c<=0x10ffff) { |
| // surrogate or supplementary code point |
| return containsSlow(c, list4kStarts[0xd], list4kStarts[0x11]); |
| } else { |
| // Out-of-range code points get FALSE, consistent with long-standing |
| // behavior of UnicodeSet::contains(c). |
| return FALSE; |
| } |
| } |
| |
| /* |
| * Check for sufficient length for trail unit for each surrogate pair. |
| * Handle single surrogates as surrogate code points as usual in ICU. |
| */ |
| const UChar * |
| BMPSet::span(const UChar *s, const UChar *limit, USetSpanCondition spanCondition) const { |
| UChar c, c2; |
| |
| if(spanCondition) { |
| // span |
| do { |
| c=*s; |
| if(c<=0x7f) { |
| if(!asciiBytes[c]) { |
| break; |
| } |
| } else if(c<=0x7ff) { |
| if((table7FF[c&0x3f]&((uint32_t)1<<(c>>6)))==0) { |
| break; |
| } |
| } else if(c<0xd800 || c>=0xe000) { |
| int lead=c>>12; |
| uint32_t twoBits=(bmpBlockBits[(c>>6)&0x3f]>>lead)&0x10001; |
| if(twoBits<=1) { |
| // All 64 code points with the same bits 15..6 |
| // are either in the set or not. |
| if(twoBits==0) { |
| break; |
| } |
| } else { |
| // Look up the code point in its 4k block of code points. |
| if(!containsSlow(c, list4kStarts[lead], list4kStarts[lead+1])) { |
| break; |
| } |
| } |
| } else if(c>=0xdc00 || (s+1)==limit || (c2=s[1])<0xdc00 || c2>=0xe000) { |
| // surrogate code point |
| if(!containsSlow(c, list4kStarts[0xd], list4kStarts[0xe])) { |
| break; |
| } |
| } else { |
| // surrogate pair |
| if(!containsSlow(U16_GET_SUPPLEMENTARY(c, c2), list4kStarts[0x10], list4kStarts[0x11])) { |
| break; |
| } |
| ++s; |
| } |
| } while(++s<limit); |
| } else { |
| // span not |
| do { |
| c=*s; |
| if(c<=0x7f) { |
| if(asciiBytes[c]) { |
| break; |
| } |
| } else if(c<=0x7ff) { |
| if((table7FF[c&0x3f]&((uint32_t)1<<(c>>6)))!=0) { |
| break; |
| } |
| } else if(c<0xd800 || c>=0xe000) { |
| int lead=c>>12; |
| uint32_t twoBits=(bmpBlockBits[(c>>6)&0x3f]>>lead)&0x10001; |
| if(twoBits<=1) { |
| // All 64 code points with the same bits 15..6 |
| // are either in the set or not. |
| if(twoBits!=0) { |
| break; |
| } |
| } else { |
| // Look up the code point in its 4k block of code points. |
| if(containsSlow(c, list4kStarts[lead], list4kStarts[lead+1])) { |
| break; |
| } |
| } |
| } else if(c>=0xdc00 || (s+1)==limit || (c2=s[1])<0xdc00 || c2>=0xe000) { |
| // surrogate code point |
| if(containsSlow(c, list4kStarts[0xd], list4kStarts[0xe])) { |
| break; |
| } |
| } else { |
| // surrogate pair |
| if(containsSlow(U16_GET_SUPPLEMENTARY(c, c2), list4kStarts[0x10], list4kStarts[0x11])) { |
| break; |
| } |
| ++s; |
| } |
| } while(++s<limit); |
| } |
| return s; |
| } |
| |
| /* Symmetrical with span(). */ |
| const UChar * |
| BMPSet::spanBack(const UChar *s, const UChar *limit, USetSpanCondition spanCondition) const { |
| UChar c, c2; |
| |
| if(spanCondition) { |
| // span |
| for(;;) { |
| c=*(--limit); |
| if(c<=0x7f) { |
| if(!asciiBytes[c]) { |
| break; |
| } |
| } else if(c<=0x7ff) { |
| if((table7FF[c&0x3f]&((uint32_t)1<<(c>>6)))==0) { |
| break; |
| } |
| } else if(c<0xd800 || c>=0xe000) { |
| int lead=c>>12; |
| uint32_t twoBits=(bmpBlockBits[(c>>6)&0x3f]>>lead)&0x10001; |
| if(twoBits<=1) { |
| // All 64 code points with the same bits 15..6 |
| // are either in the set or not. |
| if(twoBits==0) { |
| break; |
| } |
| } else { |
| // Look up the code point in its 4k block of code points. |
| if(!containsSlow(c, list4kStarts[lead], list4kStarts[lead+1])) { |
| break; |
| } |
| } |
| } else if(c<0xdc00 || s==limit || (c2=*(limit-1))<0xd800 || c2>=0xdc00) { |
| // surrogate code point |
| if(!containsSlow(c, list4kStarts[0xd], list4kStarts[0xe])) { |
| break; |
| } |
| } else { |
| // surrogate pair |
| if(!containsSlow(U16_GET_SUPPLEMENTARY(c2, c), list4kStarts[0x10], list4kStarts[0x11])) { |
| break; |
| } |
| --limit; |
| } |
| if(s==limit) { |
| return s; |
| } |
| } |
| } else { |
| // span not |
| for(;;) { |
| c=*(--limit); |
| if(c<=0x7f) { |
| if(asciiBytes[c]) { |
| break; |
| } |
| } else if(c<=0x7ff) { |
| if((table7FF[c&0x3f]&((uint32_t)1<<(c>>6)))!=0) { |
| break; |
| } |
| } else if(c<0xd800 || c>=0xe000) { |
| int lead=c>>12; |
| uint32_t twoBits=(bmpBlockBits[(c>>6)&0x3f]>>lead)&0x10001; |
| if(twoBits<=1) { |
| // All 64 code points with the same bits 15..6 |
| // are either in the set or not. |
| if(twoBits!=0) { |
| break; |
| } |
| } else { |
| // Look up the code point in its 4k block of code points. |
| if(containsSlow(c, list4kStarts[lead], list4kStarts[lead+1])) { |
| break; |
| } |
| } |
| } else if(c<0xdc00 || s==limit || (c2=*(limit-1))<0xd800 || c2>=0xdc00) { |
| // surrogate code point |
| if(containsSlow(c, list4kStarts[0xd], list4kStarts[0xe])) { |
| break; |
| } |
| } else { |
| // surrogate pair |
| if(containsSlow(U16_GET_SUPPLEMENTARY(c2, c), list4kStarts[0x10], list4kStarts[0x11])) { |
| break; |
| } |
| --limit; |
| } |
| if(s==limit) { |
| return s; |
| } |
| } |
| } |
| return limit+1; |
| } |
| |
| /* |
| * Precheck for sufficient trail bytes at end of string only once per span. |
| * Check validity. |
| */ |
| const uint8_t * |
| BMPSet::spanUTF8(const uint8_t *s, int32_t length, USetSpanCondition spanCondition) const { |
| const uint8_t *limit=s+length; |
| uint8_t b=*s; |
| if((int8_t)b>=0) { |
| // Initial all-ASCII span. |
| if(spanCondition) { |
| do { |
| if(!asciiBytes[b] || ++s==limit) { |
| return s; |
| } |
| b=*s; |
| } while((int8_t)b>=0); |
| } else { |
| do { |
| if(asciiBytes[b] || ++s==limit) { |
| return s; |
| } |
| b=*s; |
| } while((int8_t)b>=0); |
| } |
| length=(int32_t)(limit-s); |
| } |
| |
| if(spanCondition!=USET_SPAN_NOT_CONTAINED) { |
| spanCondition=USET_SPAN_CONTAINED; // Pin to 0/1 values. |
| } |
| |
| const uint8_t *limit0=limit; |
| |
| /* |
| * Make sure that the last 1/2/3/4-byte sequence before limit is complete |
| * or runs into a lead byte. |
| * In the span loop compare s with limit only once |
| * per multi-byte character. |
| * |
| * Give a trailing illegal sequence the same value as the result of contains(FFFD), |
| * including it if that is part of the span, otherwise set limit0 to before |
| * the truncated sequence. |
| */ |
| b=*(limit-1); |
| if((int8_t)b<0) { |
| // b>=0x80: lead or trail byte |
| if(b<0xc0) { |
| // single trail byte, check for preceding 3- or 4-byte lead byte |
| if(length>=2 && (b=*(limit-2))>=0xe0) { |
| limit-=2; |
| if(asciiBytes[0x80]!=spanCondition) { |
| limit0=limit; |
| } |
| } else if(b<0xc0 && b>=0x80 && length>=3 && (b=*(limit-3))>=0xf0) { |
| // 4-byte lead byte with only two trail bytes |
| limit-=3; |
| if(asciiBytes[0x80]!=spanCondition) { |
| limit0=limit; |
| } |
| } |
| } else { |
| // lead byte with no trail bytes |
| --limit; |
| if(asciiBytes[0x80]!=spanCondition) { |
| limit0=limit; |
| } |
| } |
| } |
| |
| uint8_t t1, t2, t3; |
| |
| while(s<limit) { |
| b=*s; |
| if(b<0xc0) { |
| // ASCII; or trail bytes with the result of contains(FFFD). |
| if(spanCondition) { |
| do { |
| if(!asciiBytes[b]) { |
| return s; |
| } else if(++s==limit) { |
| return limit0; |
| } |
| b=*s; |
| } while(b<0xc0); |
| } else { |
| do { |
| if(asciiBytes[b]) { |
| return s; |
| } else if(++s==limit) { |
| return limit0; |
| } |
| b=*s; |
| } while(b<0xc0); |
| } |
| } |
| ++s; // Advance past the lead byte. |
| if(b>=0xe0) { |
| if(b<0xf0) { |
| if( /* handle U+0000..U+FFFF inline */ |
| (t1=(uint8_t)(s[0]-0x80)) <= 0x3f && |
| (t2=(uint8_t)(s[1]-0x80)) <= 0x3f |
| ) { |
| b&=0xf; |
| uint32_t twoBits=(bmpBlockBits[t1]>>b)&0x10001; |
| if(twoBits<=1) { |
| // All 64 code points with this lead byte and middle trail byte |
| // are either in the set or not. |
| if(twoBits!=(uint32_t)spanCondition) { |
| return s-1; |
| } |
| } else { |
| // Look up the code point in its 4k block of code points. |
| UChar32 c=(b<<12)|(t1<<6)|t2; |
| if(containsSlow(c, list4kStarts[b], list4kStarts[b+1]) != spanCondition) { |
| return s-1; |
| } |
| } |
| s+=2; |
| continue; |
| } |
| } else if( /* handle U+10000..U+10FFFF inline */ |
| (t1=(uint8_t)(s[0]-0x80)) <= 0x3f && |
| (t2=(uint8_t)(s[1]-0x80)) <= 0x3f && |
| (t3=(uint8_t)(s[2]-0x80)) <= 0x3f |
| ) { |
| // Give an illegal sequence the same value as the result of contains(FFFD). |
| UChar32 c=((UChar32)(b-0xf0)<<18)|((UChar32)t1<<12)|(t2<<6)|t3; |
| if( ( (0x10000<=c && c<=0x10ffff) ? |
| containsSlow(c, list4kStarts[0x10], list4kStarts[0x11]) : |
| asciiBytes[0x80] |
| ) != spanCondition |
| ) { |
| return s-1; |
| } |
| s+=3; |
| continue; |
| } |
| } else /* 0xc0<=b<0xe0 */ { |
| if( /* handle U+0000..U+07FF inline */ |
| (t1=(uint8_t)(*s-0x80)) <= 0x3f |
| ) { |
| if((USetSpanCondition)((table7FF[t1]&((uint32_t)1<<(b&0x1f)))!=0) != spanCondition) { |
| return s-1; |
| } |
| ++s; |
| continue; |
| } |
| } |
| |
| // Give an illegal sequence the same value as the result of contains(FFFD). |
| // Handle each byte of an illegal sequence separately to simplify the code; |
| // no need to optimize error handling. |
| if(asciiBytes[0x80]!=spanCondition) { |
| return s-1; |
| } |
| } |
| |
| return limit0; |
| } |
| |
| /* |
| * While going backwards through UTF-8 optimize only for ASCII. |
| * Unlike UTF-16, UTF-8 is not forward-backward symmetrical, that is, it is not |
| * possible to tell from the last byte in a multi-byte sequence how many |
| * preceding bytes there should be. Therefore, going backwards through UTF-8 |
| * is much harder than going forward. |
| */ |
| int32_t |
| BMPSet::spanBackUTF8(const uint8_t *s, int32_t length, USetSpanCondition spanCondition) const { |
| if(spanCondition!=USET_SPAN_NOT_CONTAINED) { |
| spanCondition=USET_SPAN_CONTAINED; // Pin to 0/1 values. |
| } |
| |
| uint8_t b; |
| |
| do { |
| b=s[--length]; |
| if((int8_t)b>=0) { |
| // ASCII sub-span |
| if(spanCondition) { |
| do { |
| if(!asciiBytes[b]) { |
| return length+1; |
| } else if(length==0) { |
| return 0; |
| } |
| b=s[--length]; |
| } while((int8_t)b>=0); |
| } else { |
| do { |
| if(asciiBytes[b]) { |
| return length+1; |
| } else if(length==0) { |
| return 0; |
| } |
| b=s[--length]; |
| } while((int8_t)b>=0); |
| } |
| } |
| |
| int32_t prev=length; |
| UChar32 c; |
| // trail byte: collect a multi-byte character |
| // (or lead byte in last-trail position) |
| c=utf8_prevCharSafeBody(s, 0, &length, b, -3); |
| // c is a valid code point, not ASCII, not a surrogate |
| if(c<=0x7ff) { |
| if((USetSpanCondition)((table7FF[c&0x3f]&((uint32_t)1<<(c>>6)))!=0) != spanCondition) { |
| return prev+1; |
| } |
| } else if(c<=0xffff) { |
| int lead=c>>12; |
| uint32_t twoBits=(bmpBlockBits[(c>>6)&0x3f]>>lead)&0x10001; |
| if(twoBits<=1) { |
| // All 64 code points with the same bits 15..6 |
| // are either in the set or not. |
| if(twoBits!=(uint32_t)spanCondition) { |
| return prev+1; |
| } |
| } else { |
| // Look up the code point in its 4k block of code points. |
| if(containsSlow(c, list4kStarts[lead], list4kStarts[lead+1]) != spanCondition) { |
| return prev+1; |
| } |
| } |
| } else { |
| if(containsSlow(c, list4kStarts[0x10], list4kStarts[0x11]) != spanCondition) { |
| return prev+1; |
| } |
| } |
| } while(length>0); |
| return 0; |
| } |
| |
| U_NAMESPACE_END |