Update to kernel headers v4.9.3.

Test: Built arm, arm64, x86, x86_64 targets.
Test: Booted on angler, and ran bionic unit tests (32 bit and 64 bit).

Change-Id: I1e1baf5e5ce74283d21140736aad64c25dbdbe4e
diff --git a/original/uapi/linux/nl80211.h b/original/uapi/linux/nl80211.h
index 2206941..d3cbe48 100644
--- a/original/uapi/linux/nl80211.h
+++ b/original/uapi/linux/nl80211.h
@@ -48,6 +48,7 @@
 #define NL80211_MULTICAST_GROUP_REG		"regulatory"
 #define NL80211_MULTICAST_GROUP_MLME		"mlme"
 #define NL80211_MULTICAST_GROUP_VENDOR		"vendor"
+#define NL80211_MULTICAST_GROUP_NAN		"nan"
 #define NL80211_MULTICAST_GROUP_TESTMODE	"testmode"
 
 /**
@@ -322,7 +323,7 @@
  * @NL80211_CMD_GET_SCAN: get scan results
  * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
  *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- *	probe requests at CCK rate or not. %NL80211_ATTR_MAC can be used to
+ *	probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to
  *	specify a BSSID to scan for; if not included, the wildcard BSSID will
  *	be used.
  * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
@@ -838,6 +839,41 @@
  *	not running. The driver indicates the status of the scan through
  *	cfg80211_scan_done().
  *
+ * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
+ *	%NL80211_ATTR_WDEV interface. This interface must have been previously
+ *	created with %NL80211_CMD_NEW_INTERFACE. After it has been started, the
+ *	NAN interface will create or join a cluster. This command must have a
+ *	valid %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
+ *	%NL80211_ATTR_NAN_DUAL attributes.
+ *	After this command NAN functions can be added.
+ * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
+ *	its %NL80211_ATTR_WDEV interface.
+ * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
+ *	with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
+ *	operation returns the strictly positive and unique instance id
+ *	(%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE)
+ *	of the function upon success.
+ *	Since instance ID's can be re-used, this cookie is the right
+ *	way to identify the function. This will avoid races when a termination
+ *	event is handled by the user space after it has already added a new
+ *	function that got the same instance id from the kernel as the one
+ *	which just terminated.
+ *	This cookie may be used in NAN events even before the command
+ *	returns, so userspace shouldn't process NAN events until it processes
+ *	the response to this command.
+ *	Look at %NL80211_ATTR_SOCKET_OWNER as well.
+ * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie.
+ *	This command is also used as a notification sent when a NAN function is
+ *	terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
+ *	and %NL80211_ATTR_COOKIE attributes.
+ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN configuration. NAN
+ *	must be operational (%NL80211_CMD_START_NAN was executed).
+ *	It must contain at least one of the following attributes:
+ *	%NL80211_ATTR_NAN_MASTER_PREF, %NL80211_ATTR_NAN_DUAL.
+ * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
+ *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
+ *	%NL80211_ATTR_COOKIE.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1026,6 +1062,13 @@
 
 	NL80211_CMD_ABORT_SCAN,
 
+	NL80211_CMD_START_NAN,
+	NL80211_CMD_STOP_NAN,
+	NL80211_CMD_ADD_NAN_FUNCTION,
+	NL80211_CMD_DEL_NAN_FUNCTION,
+	NL80211_CMD_CHANGE_NAN_CONFIG,
+	NL80211_CMD_NAN_MATCH,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1343,7 +1386,13 @@
  *	enum nl80211_band value is used as the index (nla_type() of the nested
  *	data. If a band is not included, it will be configured to allow all
  *	rates based on negotiated supported rates information. This attribute
- *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
+ *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP,
+ *	and joining mesh networks (not IBSS yet). In the later case, it must
+ *	specify just a single bitrate, which is to be used for the beacon.
+ *	The driver must also specify support for this with the extended
+ *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+ *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
+ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
  *
  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
@@ -1733,6 +1782,12 @@
  *	regulatory indoor configuration would be owned by the netlink socket
  *	that configured the indoor setting, and the indoor operation would be
  *	cleared when the socket is closed.
+ *	If set during NAN interface creation, the interface will be destroyed
+ *	if the socket is closed just like any other interface. Moreover, only
+ *	the netlink socket that created the interface will be allowed to add
+ *	and remove functions. NAN notifications will be sent in unicast to that
+ *	socket. Without this attribute, any socket can add functions and the
+ *	notifications will be sent to the %NL80211_MCGRP_NAN multicast group.
  *
  * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
  *	the TDLS link initiator.
@@ -1867,6 +1922,24 @@
  * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is
  *	used to pull the stored data for mesh peer in power save state.
  *
+ * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by
+ *	%NL80211_CMD_START_NAN and optionally with
+ *	%NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
+ *	Also, values 1 and 255 are reserved for certification purposes and
+ *	should not be used during a normal device operation.
+ * @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see
+ *	&enum nl80211_nan_dual_band_conf). This attribute is used with
+ *	%NL80211_CMD_START_NAN and optionally with
+ *	%NL80211_CMD_CHANGE_NAN_CONFIG.
+ * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
+ *	&enum nl80211_nan_func_attributes for description of this nested
+ *	attribute.
+ * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
+ *	See &enum nl80211_nan_match_attributes.
+ *
+ * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
+ *	used in various commands/events for specifying the BSSID.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2261,6 +2334,13 @@
 
 	NL80211_ATTR_MESH_PEER_AID,
 
+	NL80211_ATTR_NAN_MASTER_PREF,
+	NL80211_ATTR_NAN_DUAL,
+	NL80211_ATTR_NAN_FUNC,
+	NL80211_ATTR_NAN_MATCH,
+
+	NL80211_ATTR_BSSID,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2339,6 +2419,7 @@
  *	commands to create and destroy one
  * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
  *	This mode corresponds to the MIB variable dot11OCBActivated=true
+ * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
  * @NUM_NL80211_IFTYPES: number of defined interface types
  *
@@ -2359,6 +2440,7 @@
 	NL80211_IFTYPE_P2P_GO,
 	NL80211_IFTYPE_P2P_DEVICE,
 	NL80211_IFTYPE_OCB,
+	NL80211_IFTYPE_NAN,
 
 	/* keep last */
 	NUM_NL80211_IFTYPES,
@@ -4551,6 +4633,12 @@
  *	(if available).
  * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
  *	channel dwell time.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
+ *	configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
+ *	configuration (AP/mesh) with HT rates.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
+ *	configuration (AP/mesh) with VHT rates.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4562,6 +4650,9 @@
 	NL80211_EXT_FEATURE_SCAN_START_TIME,
 	NL80211_EXT_FEATURE_BSS_PARENT_TSF,
 	NL80211_EXT_FEATURE_SET_SCAN_DWELL,
+	NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+	NL80211_EXT_FEATURE_BEACON_RATE_HT,
+	NL80211_EXT_FEATURE_BEACON_RATE_VHT,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -4855,4 +4946,186 @@
 	NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
 };
 
+/**
+ * enum nl80211_nan_dual_band_conf - NAN dual band configuration
+ *
+ * Defines the NAN dual band mode of operation
+ *
+ * @NL80211_NAN_BAND_DEFAULT: device default mode
+ * @NL80211_NAN_BAND_2GHZ: 2.4GHz mode
+ * @NL80211_NAN_BAND_5GHZ: 5GHz mode
+  */
+enum nl80211_nan_dual_band_conf {
+	NL80211_NAN_BAND_DEFAULT	= 1 << 0,
+	NL80211_NAN_BAND_2GHZ		= 1 << 1,
+	NL80211_NAN_BAND_5GHZ		= 1 << 2,
+};
+
+/**
+ * enum nl80211_nan_function_type - NAN function type
+ *
+ * Defines the function type of a NAN function
+ *
+ * @NL80211_NAN_FUNC_PUBLISH: function is publish
+ * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
+ * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
+ */
+enum nl80211_nan_function_type {
+	NL80211_NAN_FUNC_PUBLISH,
+	NL80211_NAN_FUNC_SUBSCRIBE,
+	NL80211_NAN_FUNC_FOLLOW_UP,
+
+	/* keep last */
+	__NL80211_NAN_FUNC_TYPE_AFTER_LAST,
+	NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1,
+};
+
+/**
+ * enum nl80211_nan_publish_type - NAN publish tx type
+ *
+ * Defines how to send publish Service Discovery Frames
+ *
+ * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited
+ * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited
+ */
+enum nl80211_nan_publish_type {
+	NL80211_NAN_SOLICITED_PUBLISH = 1 << 0,
+	NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1,
+};
+
+/**
+ * enum nl80211_nan_func_term_reason - NAN functions termination reason
+ *
+ * Defines termination reasons of a NAN function
+ *
+ * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user
+ * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout
+ * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored
+ */
+enum nl80211_nan_func_term_reason {
+	NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST,
+	NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED,
+	NL80211_NAN_FUNC_TERM_REASON_ERROR,
+};
+
+#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6
+#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff
+#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff
+
+/**
+ * enum nl80211_nan_func_attributes - NAN function attributes
+ * @__NL80211_NAN_FUNC_INVALID: invalid
+ * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8).
+ * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as
+ *	specified in NAN spec. This is a binary attribute.
+ * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is
+ *	publish. Defines the transmission type for the publish Service Discovery
+ *	Frame, see &enum nl80211_nan_publish_type. Its type is u8.
+ * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited
+ *	publish. Should the solicited publish Service Discovery Frame be sent to
+ *	the NAN Broadcast address. This is a flag.
+ * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is
+ *	subscribe. Is the subscribe active. This is a flag.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up.
+ *	The instance ID for the follow up Service Discovery Frame. This is u8.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
+ *	is follow up. This is a u8.
+ *	The requestor instance ID for the follow up Service Discovery Frame.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
+ *	follow up Service Discovery Frame. This is a binary attribute.
+ * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
+ *	close range. The range itself (RSSI) is defined by the device.
+ *	This is a flag.
+ * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should
+ *	stay active. If not present infinite TTL is assumed. This is a u32.
+ * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service
+ *	specific info. This is a binary attribute.
+ * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
+ *	See &enum nl80211_nan_srf_attributes.
+ * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested
+ *	attribute. It is a list of binary values.
+ * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a
+ *	nested attribute. It is a list of binary values.
+ * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function.
+ *	Its type is u8 and it cannot be 0.
+ * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason.
+ *	See &enum nl80211_nan_func_term_reason.
+ *
+ * @NUM_NL80211_NAN_FUNC_ATTR: internal
+ * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
+ */
+enum nl80211_nan_func_attributes {
+	__NL80211_NAN_FUNC_INVALID,
+	NL80211_NAN_FUNC_TYPE,
+	NL80211_NAN_FUNC_SERVICE_ID,
+	NL80211_NAN_FUNC_PUBLISH_TYPE,
+	NL80211_NAN_FUNC_PUBLISH_BCAST,
+	NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE,
+	NL80211_NAN_FUNC_FOLLOW_UP_ID,
+	NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID,
+	NL80211_NAN_FUNC_FOLLOW_UP_DEST,
+	NL80211_NAN_FUNC_CLOSE_RANGE,
+	NL80211_NAN_FUNC_TTL,
+	NL80211_NAN_FUNC_SERVICE_INFO,
+	NL80211_NAN_FUNC_SRF,
+	NL80211_NAN_FUNC_RX_MATCH_FILTER,
+	NL80211_NAN_FUNC_TX_MATCH_FILTER,
+	NL80211_NAN_FUNC_INSTANCE_ID,
+	NL80211_NAN_FUNC_TERM_REASON,
+
+	/* keep last */
+	NUM_NL80211_NAN_FUNC_ATTR,
+	NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1
+};
+
+/**
+ * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes
+ * @__NL80211_NAN_SRF_INVALID: invalid
+ * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
+ *	This is a flag.
+ * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
+ *	&NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
+ * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
+ *	&NL80211_NAN_SRF_BF is present. This is a u8.
+ * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
+ *	and only if &NL80211_NAN_SRF_BF isn't present. This is a nested
+ *	attribute. Each nested attribute is a MAC address.
+ * @NUM_NL80211_NAN_SRF_ATTR: internal
+ * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
+ */
+enum nl80211_nan_srf_attributes {
+	__NL80211_NAN_SRF_INVALID,
+	NL80211_NAN_SRF_INCLUDE,
+	NL80211_NAN_SRF_BF,
+	NL80211_NAN_SRF_BF_IDX,
+	NL80211_NAN_SRF_MAC_ADDRS,
+
+	/* keep last */
+	NUM_NL80211_NAN_SRF_ATTR,
+	NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1,
+};
+
+/**
+ * enum nl80211_nan_match_attributes - NAN match attributes
+ * @__NL80211_NAN_MATCH_INVALID: invalid
+ * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the
+ *	match. This is a nested attribute.
+ *	See &enum nl80211_nan_func_attributes.
+ * @NL80211_NAN_MATCH_FUNC_PEER: the peer function
+ *	that caused the match. This is a nested attribute.
+ *	See &enum nl80211_nan_func_attributes.
+ *
+ * @NUM_NL80211_NAN_MATCH_ATTR: internal
+ * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
+ */
+enum nl80211_nan_match_attributes {
+	__NL80211_NAN_MATCH_INVALID,
+	NL80211_NAN_MATCH_FUNC_LOCAL,
+	NL80211_NAN_MATCH_FUNC_PEER,
+
+	/* keep last */
+	NUM_NL80211_NAN_MATCH_ATTR,
+	NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
+};
+
 #endif /* __LINUX_NL80211_H */