| kmod 10 |
| ======= |
| |
| - New features: |
| - Read coresize from /sys if supported |
| |
| - Add flag to kmod_module_probe_insert() to apply blacklisting during |
| probe only if mod is an alias. Now modprobe uses this flag by default. |
| This is needed to fix a change in behavior regarding module-init-tools |
| and ultimately makes us loading a blacklisted module. |
| |
| - Better formatting in man pages |
| |
| - Add option to disable building man pages at build time |
| |
| - Fixes in the testsuite and refactoring of LDPRELOAD'ed libraries |
| |
| - Re-licensing testsuite as LGPL |
| |
| kmod 9 |
| ====== |
| |
| - Improvements to the testsuite: |
| - Check for correct handling of softdep loops |
| - Check for correct handling of install command loops |
| |
| - Bug fixes: |
| - Fix build with compilers that don't support --gc-sections |
| - Handle errors when dealing with gzipped modules |
| - depmod now handles errors while writing indices, so it doesn't end up |
| with a corrupted index without telling the user |
| |
| kmod 8 |
| ====== |
| |
| - No new features, small bug fixes only. |
| - Fix a bug in "modprobe -c" output: be compatible with |
| module-init-tools |
| |
| - Give a useful error message when init_module fails due to bad |
| parameter or unknown symbols |
| |
| - Fix doc generation |
| |
| kmod 7 |
| ====== |
| |
| - Re-order dirs for configuration files to match the change in systemd and |
| udev: now the priority is: |
| 1. /etc/modprobe.d |
| 2. /run/modprobe.d |
| 3. /lib/modprobe.d |
| |
| - Fix setting CFLAGS/LDFLAGS in build system. This prevented us from not |
| allowing the user to set his preferences. |
| |
| - Bug fixes: |
| - Return same error codes of module-init-tools when removing modules |
| with modprobe |
| - Fix builtin output in "--show-depends" when target kernel is not the |
| same of the running kernel |
| - 'modprobe -r' always look at all command line arguments |
| - Fix '-q' usage in modprobe |
| |
| kmod 6 |
| ====== |
| |
| - New API in libkmod: |
| - kmod_module_apply_filter(): a generic function to apply filters in a |
| list of modules. This deprecates the use of |
| kmod_module_get_filtered_blacklist() |
| |
| - More tests in testsuite |
| |
| - Add compatibility with uClibc again |
| |
| - Lookup modules.builtin.bin to decide if a module is built in kernel |
| |
| - Downgrade some log messages so we don't annoy people with useless messages |
| |
| - Bug fixes: |
| - Flag --ignore-loaded was not being properly handled |
| - Infinite loop with softdeps |
| - Infinite loop with dumb user configuration with install commands |
| - Fix leak in index when there's a partial match |
| |
| - Move repository and tarballs to kernel.org |
| |
| kmod 5 |
| ====== |
| |
| - Break libkmod's API to insert a module like modprobe does. It now accepts |
| extra an extra argument to print its action and acceptable flags were |
| sanitized. |
| |
| - Share more code between modprobe and libkmod: using the new version of |
| kmod_module_probe_insert_module() it's possible to share a great amount of |
| code between modprobe and libkmod |
| |
| - modprobe no longer works with paths: it only accepts module names and/or |
| aliases now. |
| |
| - testsuite was added to repository, allowing automated tests to be run and |
| easing the way bugs are reproduced. |
| |
| - modprobe: when dumping configuration ('-c' option) separate config |
| and indexes by adding a commented line between them. |
| |
| - Fix bugs wrt normalizing aliases and module names |
| |
| - Fix bug wrt inserting an alias that resolves to multiple modules: we should |
| not stop on the first error, but rather continue to try loading other |
| modules. |
| |
| - Fix unaligned memory access in hash function, causing depmod to output wrong |
| information in ARMv5 |
| |
| - Fix man page build and install: now they are only installed if tools are |
| enabled |
| |
| kmod 4 |
| ====== |
| |
| - New APIs in libkmod to: |
| - Get configuration lists: blacklists, install commands, remove |
| commands, aliases, options and softdeps |
| - Dump indexes |
| |
| - Several bugs fixed in libkmod, modprobe, depmod and modinfo |
| |
| - API documentation: if configure with run with --enable-gtk-doc, the API doc |
| will be generated by make. Gtk-doc is required for that. |
| |
| - Man pages are built, which replace man pages from module-init-tools |
| |
| - 'include' and 'config' options in *.conf files were deprecated |
| |
| - configure is not run by autogen.sh. Instead, a common set of options is |
| printed. If you are hacking on kmod, consider using bootstrap-configure |
| script. |
| |
| - 'modprobe -c' works as expected now. As opposed to module-init-tools, it |
| dumps the parsed configuration, not only the file contents. |
| |
| kmod 3 |
| ====== |
| |
| - New APIs in libkmod to: |
| - Get symbols from module, parsing the ELF section |
| - Get dependency symbols |
| - Check if resources are still valid or if libkmod must be reloaded |
| - Insert module like modprobe, checking (soft-)dependencies, commands, |
| blacklist. It can run commands by itself and to call a callback |
| function. |
| |
| - Support to load modules compressed with xz |
| |
| - Tools are now bundled together in a single tool called kmod. It can be |
| called using symlinks with the same names as tools from module-init-tools. |
| E.g: /usr/bin/lsmod -> /usr/bin/kmod. With this we are aiming to complete a |
| 1:1 replacement of module-init-tools. |
| |
| - The only missing tool, depmod, was added to kmod together with the necessary |
| APIs in libkmod. |
| |
| - If a program using libkmod runs for a long time, as for example udev, it must |
| check if it doesn't have to re-load libkmod. A new helper function was added |
| in libkmod to check if context is still valid and udev is already using it. |
| |
| - An 'unaligned access' bug was fixed. So those architecture that does not |
| handle unaligned access can use kmod, too. |
| |
| kmod 2 |
| ====== |
| |
| Some bugs fixed: the worst of them was with an infinite loop when an alias |
| matched more than one module. |
| |
| - New APIs in libkmod to: |
| - Get soft dependencies |
| - Get info from module files parsing ELF |
| - Get modversions from files parsing ELF |
| |
| - Support to load gzipped kernel modules: kmod can be compiled with support to |
| gzipped modules by giving the --enable-zlib flag |
| |
| - Support to forcefully load modules, both vermagic and modversion |
| |
| - Support to force and nowait removal flags |
| |
| - Configuration files are parsed in the same order as modprobe: files are |
| sorted alphabetically (independently of their dir) and files with the same |
| name obey a precedence order |
| |
| - New tool: kmod-modinfo |
| |
| - kmod-modprobe gained several features to be a 1:1 replacement for modprobe. |
| The only missing things are the options '--showconfig' and '-t / -l'. These |
| last ones have been deprecated long ago and they will be removed from |
| modprobe. A lot of effort has been put on kmod-modprobe to ensure it |
| maintains compabitility with modprobe. |
| |
| - linux-modules@vger.kernel.org became the official mailing list for kmod |
| |
| kmod 1 |
| ====== |
| |
| First version of kmod and its library, libkmod. |
| |
| In the libkmod it's currently possible to: |
| - List modules currently loaded |
| - Get information about loaded modules such as initstate, refcount, |
| holders, sections, address and size |
| - Lookup modules by alias, module name or path |
| - Insert modules: options from configuration and extra options can be |
| passed, but flags are not implemented, yet |
| - Remove modules |
| - Filter list of modules using blacklist |
| - For each module, get the its list of options and install/remove |
| commands |
| - Indexes can be loaded on startup to speedup lookups later |
| |
| Tools provided with the same set of options as in module-init-tools: |
| - kmod-lsmod |
| - kmod-insmod |
| - kmod-rmmod |
| - kmod-modprobe, with some functionality still missing (use of softdep, |
| dump configuration, show modversions) |