| // Copyright (c) 2012 The Chromium Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| // Defining IPC Messages |
| // |
| // Your IPC messages will be defined by macros inside of an XXX_messages.h |
| // header file. Most of the time, the system can automatically generate all |
| // of messaging mechanism from these definitions, but sometimes some manual |
| // coding is required. In these cases, you will also have an XXX_messages.cc |
| // implemation file as well. |
| // |
| // The senders of your messages will include your XXX_messages.h file to |
| // get the full set of definitions they need to send your messages. |
| // |
| // Each XXX_messages.h file must be registered with the IPC system. This |
| // requires adding two things: |
| // - An XXXMsgStart value to the IPCMessageStart enum in ipc_message_start.h |
| // - An inclusion of XXX_messages.h file in a message generator .h file |
| // |
| // The XXXMsgStart value is an enumeration that ensures uniqueness for |
| // each different message file. Later, you will use this inside your |
| // XXX_messages.h file before invoking message declaration macros: |
| // #define IPC_MESSAGE_START XXXMsgStart |
| // ( ... your macro invocations go here ... ) |
| // |
| // Message Generator Files |
| // |
| // A message generator .h header file pulls in all other message-declaring |
| // headers for a given component. It is included by a message generator |
| // .cc file, which is where all the generated code will wind up. Typically, |
| // you will use an existing generator (e.g. common_message_generator.cc |
| // in /chrome/common), but there are circumstances where you may add a |
| // new one. |
| // |
| // In the rare cicrucmstances where you can't re-use an existing file, |
| // your YYY_message_generator.cc file for a component YYY would contain |
| // the following code: |
| // // Get basic type definitions. |
| // #define IPC_MESSAGE_IMPL |
| // #include "path/to/YYY_message_generator.h" |
| // // Generate constructors. |
| // #include "ipc/struct_constructor_macros.h" |
| // #include "path/to/YYY_message_generator.h" |
| // // Generate destructors. |
| // #include "ipc/struct_destructor_macros.h" |
| // #include "path/to/YYY_message_generator.h" |
| // // Generate param traits write methods. |
| // #include "ipc/param_traits_write_macros.h" |
| // namespace IPC { |
| // #include "path/to/YYY_message_generator.h" |
| // } // namespace IPC |
| // // Generate param traits read methods. |
| // #include "ipc/param_traits_read_macros.h" |
| // namespace IPC { |
| // #include "path/to/YYY_message_generator.h" |
| // } // namespace IPC |
| // // Generate param traits log methods. |
| // #include "ipc/param_traits_log_macros.h" |
| // namespace IPC { |
| // #include "path/to/YYY_message_generator.h" |
| // } // namespace IPC |
| // |
| // In cases where manual generation is required, in your XXX_messages.cc |
| // file, put the following after all the includes for param types: |
| // #define IPC_MESSAGE_IMPL |
| // #include "XXX_messages.h" |
| // (... implementation of traits not auto-generated ...) |
| // |
| // Multiple Inclusion |
| // |
| // The XXX_messages.h file will be multiply-included by the |
| // YYY_message_generator.cc file, so your XXX_messages file can't be |
| // guarded in the usual manner. Ideally, there will be no need for any |
| // inclusion guard, since the XXX_messages.h file should consist soley |
| // of inclusions of other headers (which are self-guarding) and IPC |
| // macros (which are multiply evaluating). |
| // |
| // Note that #pragma once cannot be used here; doing so would mark the whole |
| // file as being singly-included. Since your XXX_messages.h file is only |
| // partially-guarded, care must be taken to ensure that it is only included |
| // by other .cc files (and the YYY_message_generator.h file). Including an |
| // XXX_messages.h file in some other .h file may result in duplicate |
| // declarations and a compilation failure. |
| // |
| // Type Declarations |
| // |
| // It is generally a bad idea to have type definitions in a XXX_messages.h |
| // file; most likely the typedef will then be used in the message, as opposed |
| // to the struct iself. Later, an IPC message dispatcher wil need to call |
| // a function taking that type, and that function is declared in some other |
| // header. Thus, in order to get the type definition, the other header |
| // would have to include the XXX_messages.h file, violating the rule above |
| // about not including XXX_messages.h file in other .h files. |
| // |
| // One approach here is to move these type definitions to another (guarded) |
| // .h file and include this second .h in your XXX_messages.h file. This |
| // is still less than ideal, because the dispatched function would have to |
| // redeclare the typedef or include this second header. This may be |
| // reasonable in a few cases. |
| // |
| // Failing all of the above, then you will want to bracket the smallest |
| // possible section of your XXX_messages.h file containing these types |
| // with an include guard macro. Be aware that providing an incomplete |
| // class type declaration to avoid pulling in a long chain of headers is |
| // acceptable when your XXX_messages.h header is being included by the |
| // message sending caller's code, but not when the YYY_message_generator.c |
| // is building the messages. In addtion, due to the multiple inclusion |
| // restriction, these type ought to be guarded. Follow a convention like: |
| // #ifndef SOME_GUARD_MACRO |
| // #define SOME_GUARD_MACRO |
| // class some_class; // One incomplete class declaration |
| // class_some_other_class; // Another incomplete class declaration |
| // #endif // SOME_GUARD_MACRO |
| // #ifdef IPC_MESSAGE_IMPL |
| // #include "path/to/some_class.h" // Full class declaration |
| // #include "path/to/some_other_class.h" // Full class declaration |
| // #endif // IPC_MESSAGE_IMPL |
| // (.. IPC macros using some_class and some_other_class ...) |
| // |
| // Macro Invocations |
| // |
| // You will use IPC message macro invocations for three things: |
| // - New struct definitions for IPC |
| // - Registering existing struct and enum definitions with IPC |
| // - Defining the messages themselves |
| // |
| // New structs are defined with IPC_STRUCT_BEGIN(), IPC_STRUCT_MEMBER(), |
| // IPC_STRUCT_END() family of macros. These cause the XXX_messages.h |
| // to proclaim equivalent struct declarations for use by callers, as well |
| // as later registering the type with the message generation. Note that |
| // IPC_STRUCT_MEMBER() is only permitted inside matching calls to |
| // IPC_STRUCT_BEGIN() / IPC_STRUCT_END(). There is also an |
| // IPC_STRUCT_BEGIN_WITH_PARENT(), which behaves like IPC_STRUCT_BEGIN(), |
| // but also accomodates structs that inherit from other structs. |
| // |
| // Externally-defined structs are registered with IPC_STRUCT_TRAITS_BEGIN(), |
| // IPC_STRUCT_TRAITS_MEMBER(), and IPC_STRUCT_TRAITS_END() macros. These |
| // cause registration of the types with message generation only. |
| // There's also IPC_STRUCT_TRAITS_PARENT, which is used to register a parent |
| // class (whose own traits are already defined). Note that |
| // IPC_STRUCT_TRAITS_MEMBER() and IPC_STRUCT_TRAITS_PARENT are only permitted |
| // inside matching calls to IPC_STRUCT_TRAITS_BEGIN() / |
| // IPC_STRUCT_TRAITS_END(). |
| // |
| // Enum types are registered with a single IPC_ENUM_TRAITS_VALIDATE() macro. |
| // There is no need to enumerate each value to the IPC mechanism. Instead, |
| // pass an expression in terms of the parameter |value| to provide |
| // range-checking. For convenience, the IPC_ENUM_TRAITS() is provided which |
| // performs no checking, passing everything including out-of-range values. |
| // Its use is discouraged. The IPC_ENUM_TRAITS_MAX_VALUE() macro can be used |
| // for the typical case where the enum must be in the range 0..maxvalue |
| // inclusive. The IPC_ENUM_TRAITS_MIN_MAX_VALUE() macro can be used for the |
| // less typical case where the enum must be in the range minvalue..maxvalue |
| // inclusive. |
| // |
| // Do not place semicolons following these IPC_ macro invocations. There |
| // is no reason to expect that their expansion corresponds one-to-one with |
| // C++ statements. |
| // |
| // Once the types have been declared / registered, message definitions follow. |
| // "Sync" messages are just synchronous calls, the Send() call doesn't return |
| // until a reply comes back. To declare a sync message, use the IPC_SYNC_ |
| // macros. The numbers at the end show how many input/output parameters there |
| // are (i.e. 1_2 is 1 in, 2 out). Input parameters are first, followed by |
| // output parameters. The caller uses Send([route id, ], in1, &out1, &out2). |
| // The receiver's handler function will be |
| // void OnSyncMessageName(const type1& in1, type2* out1, type3* out2) |
| // |
| // A caller can also send a synchronous message, while the receiver can respond |
| // at a later time. This is transparent from the sender's side. The receiver |
| // needs to use a different handler that takes in a IPC::Message* as the output |
| // type, stash the message, and when it has the data it can Send the message. |
| // |
| // Use the IPC_MESSAGE_HANDLER_DELAY_REPLY macro instead of IPC_MESSAGE_HANDLER |
| // IPC_MESSAGE_HANDLER_DELAY_REPLY(ViewHostMsg_SyncMessageName, |
| // OnSyncMessageName) |
| // |
| // The handler function will look like: |
| // void OnSyncMessageName(const type1& in1, IPC::Message* reply_msg); |
| // |
| // Receiver stashes the IPC::Message* pointer, and when it's ready, it does: |
| // ViewHostMsg_SyncMessageName::WriteReplyParams(reply_msg, out1, out2); |
| // Send(reply_msg); |
| |
| // Files that want to export their ipc messages should do |
| // #undef IPC_MESSAGE_EXPORT |
| // #define IPC_MESSAGE_EXPORT VISIBILITY_MACRO |
| // after including this header, but before using any of the macros below. |
| // (This needs to be before the include guard.) |
| #undef IPC_MESSAGE_EXPORT |
| #define IPC_MESSAGE_EXPORT |
| |
| #ifndef IPC_IPC_MESSAGE_MACROS_H_ |
| #define IPC_IPC_MESSAGE_MACROS_H_ |
| |
| #include "base/profiler/scoped_profile.h" |
| #include "ipc/ipc_message_utils.h" |
| #include "ipc/param_traits_macros.h" |
| |
| #if defined(IPC_MESSAGE_IMPL) |
| #include "ipc/ipc_message_utils_impl.h" |
| #endif |
| |
| // Convenience macro for defining structs without inheritance. Should not need |
| // to be subsequently redefined. |
| #define IPC_STRUCT_BEGIN(struct_name) \ |
| IPC_STRUCT_BEGIN_WITH_PARENT(struct_name, IPC::NoParams) |
| |
| // Macros for defining structs. Will be subsequently redefined. |
| #define IPC_STRUCT_BEGIN_WITH_PARENT(struct_name, parent) \ |
| struct struct_name; \ |
| IPC_STRUCT_TRAITS_BEGIN(struct_name) \ |
| IPC_STRUCT_TRAITS_END() \ |
| struct IPC_MESSAGE_EXPORT struct_name : parent { \ |
| struct_name(); \ |
| ~struct_name(); |
| // Optional variadic parameters specify the default value for this struct |
| // member. They are passed through to the constructor for |type|. |
| #define IPC_STRUCT_MEMBER(type, name, ...) type name; |
| #define IPC_STRUCT_END() }; |
| |
| // Message macros collect specific numbers of arguments and funnel them into |
| // the common message generation macro. These should never be redefined. |
| #define IPC_MESSAGE_CONTROL0(msg_class) \ |
| IPC_MESSAGE_DECL(EMPTY, CONTROL, msg_class, 0, 0, (), ()) |
| |
| #define IPC_MESSAGE_CONTROL1(msg_class, type1) \ |
| IPC_MESSAGE_DECL(ASYNC, CONTROL, msg_class, 1, 0, (type1), ()) |
| |
| #define IPC_MESSAGE_CONTROL2(msg_class, type1, type2) \ |
| IPC_MESSAGE_DECL(ASYNC, CONTROL, msg_class, 2, 0, (type1, type2), ()) |
| |
| #define IPC_MESSAGE_CONTROL3(msg_class, type1, type2, type3) \ |
| IPC_MESSAGE_DECL(ASYNC, CONTROL, msg_class, 3, 0, (type1, type2, type3), ()) |
| |
| #define IPC_MESSAGE_CONTROL4(msg_class, type1, type2, type3, type4) \ |
| IPC_MESSAGE_DECL(ASYNC, CONTROL, msg_class, 4, 0, (type1, type2, type3, type4), ()) |
| |
| #define IPC_MESSAGE_CONTROL5(msg_class, type1, type2, type3, type4, type5) \ |
| IPC_MESSAGE_DECL(ASYNC, CONTROL, msg_class, 5, 0, (type1, type2, type3, type4, type5), ()) |
| |
| #define IPC_MESSAGE_ROUTED0(msg_class) \ |
| IPC_MESSAGE_DECL(EMPTY, ROUTED, msg_class, 0, 0, (), ()) |
| |
| #define IPC_MESSAGE_ROUTED1(msg_class, type1) \ |
| IPC_MESSAGE_DECL(ASYNC, ROUTED, msg_class, 1, 0, (type1), ()) |
| |
| #define IPC_MESSAGE_ROUTED2(msg_class, type1, type2) \ |
| IPC_MESSAGE_DECL(ASYNC, ROUTED, msg_class, 2, 0, (type1, type2), ()) |
| |
| #define IPC_MESSAGE_ROUTED3(msg_class, type1, type2, type3) \ |
| IPC_MESSAGE_DECL(ASYNC, ROUTED, msg_class, 3, 0, (type1, type2, type3), ()) |
| |
| #define IPC_MESSAGE_ROUTED4(msg_class, type1, type2, type3, type4) \ |
| IPC_MESSAGE_DECL(ASYNC, ROUTED, msg_class, 4, 0, (type1, type2, type3, type4), ()) |
| |
| #define IPC_MESSAGE_ROUTED5(msg_class, type1, type2, type3, type4, type5) \ |
| IPC_MESSAGE_DECL(ASYNC, ROUTED, msg_class, 5, 0, (type1, type2, type3, type4, type5), ()) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL0_0(msg_class) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 0, 0, (), ()) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL0_1(msg_class, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 0, 1, (), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL0_2(msg_class, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 0, 2, (), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL0_3(msg_class, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 0, 3, (), (type1_out, type2_out, type3_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL0_4(msg_class, type1_out, type2_out, type3_out, type4_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 0, 4, (), (type1_out, type2_out, type3_out, type4_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL1_0(msg_class, type1_in) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 1, 0, (type1_in), ()) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL1_1(msg_class, type1_in, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 1, 1, (type1_in), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL1_2(msg_class, type1_in, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 1, 2, (type1_in), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL1_3(msg_class, type1_in, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 1, 3, (type1_in), (type1_out, type2_out, type3_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL1_4(msg_class, type1_in, type1_out, type2_out, type3_out, type4_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 1, 4, (type1_in), (type1_out, type2_out, type3_out, type4_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL2_0(msg_class, type1_in, type2_in) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 2, 0, (type1_in, type2_in), ()) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL2_1(msg_class, type1_in, type2_in, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 2, 1, (type1_in, type2_in), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL2_2(msg_class, type1_in, type2_in, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 2, 2, (type1_in, type2_in), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL2_3(msg_class, type1_in, type2_in, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 2, 3, (type1_in, type2_in), (type1_out, type2_out, type3_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL2_4(msg_class, type1_in, type2_in, type1_out, type2_out, type3_out, type4_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 2, 4, (type1_in, type2_in), (type1_out, type2_out, type3_out, type4_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL3_0(msg_class, type1_in, type2_in, type3_in) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 3, 0, (type1_in, type2_in, type3_in), ()) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL3_1(msg_class, type1_in, type2_in, type3_in, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 3, 1, (type1_in, type2_in, type3_in), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL3_2(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 3, 2, (type1_in, type2_in, type3_in), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL3_3(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 3, 3, (type1_in, type2_in, type3_in), (type1_out, type2_out, type3_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL3_4(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out, type3_out, type4_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 3, 4, (type1_in, type2_in, type3_in), (type1_out, type2_out, type3_out, type4_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL4_0(msg_class, type1_in, type2_in, type3_in, type4_in) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 4, 0, (type1_in, type2_in, type3_in, type4_in), ()) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL4_1(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 4, 1, (type1_in, type2_in, type3_in, type4_in), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL4_2(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 4, 2, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL4_3(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 4, 3, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out, type3_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL4_4(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out, type3_out, type4_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 4, 4, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out, type3_out, type4_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL5_0(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 5, 0, (type1_in, type2_in, type3_in, type4_in, type5_in), ()) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL5_1(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 5, 1, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL5_2(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 5, 2, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_CONTROL5_3(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, CONTROL, msg_class, 5, 3, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out, type2_out, type3_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED0_0(msg_class) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 0, 0, (), ()) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED0_1(msg_class, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 0, 1, (), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED0_2(msg_class, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 0, 2, (), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED0_3(msg_class, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 0, 3, (), (type1_out, type2_out, type3_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED0_4(msg_class, type1_out, type2_out, type3_out, type4_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 0, 4, (), (type1_out, type2_out, type3_out, type4_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED1_0(msg_class, type1_in) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 1, 0, (type1_in), ()) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED1_1(msg_class, type1_in, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 1, 1, (type1_in), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED1_2(msg_class, type1_in, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 1, 2, (type1_in), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED1_3(msg_class, type1_in, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 1, 3, (type1_in), (type1_out, type2_out, type3_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED1_4(msg_class, type1_in, type1_out, type2_out, type3_out, type4_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 1, 4, (type1_in), (type1_out, type2_out, type3_out, type4_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED2_0(msg_class, type1_in, type2_in) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 2, 0, (type1_in, type2_in), ()) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED2_1(msg_class, type1_in, type2_in, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 2, 1, (type1_in, type2_in), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED2_2(msg_class, type1_in, type2_in, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 2, 2, (type1_in, type2_in), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED2_3(msg_class, type1_in, type2_in, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 2, 3, (type1_in, type2_in), (type1_out, type2_out, type3_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED2_4(msg_class, type1_in, type2_in, type1_out, type2_out, type3_out, type4_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 2, 4, (type1_in, type2_in), (type1_out, type2_out, type3_out, type4_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED3_0(msg_class, type1_in, type2_in, type3_in) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 3, 0, (type1_in, type2_in, type3_in), ()) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED3_1(msg_class, type1_in, type2_in, type3_in, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 3, 1, (type1_in, type2_in, type3_in), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED3_2(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 3, 2, (type1_in, type2_in, type3_in), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED3_3(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 3, 3, (type1_in, type2_in, type3_in), (type1_out, type2_out, type3_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED3_4(msg_class, type1_in, type2_in, type3_in, type1_out, type2_out, type3_out, type4_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 3, 4, (type1_in, type2_in, type3_in), (type1_out, type2_out, type3_out, type4_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED4_0(msg_class, type1_in, type2_in, type3_in, type4_in) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 4, 0, (type1_in, type2_in, type3_in, type4_in), ()) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED4_1(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 4, 1, (type1_in, type2_in, type3_in, type4_in), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED4_2(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 4, 2, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED4_3(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 4, 3, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out, type3_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED4_4(msg_class, type1_in, type2_in, type3_in, type4_in, type1_out, type2_out, type3_out, type4_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 4, 4, (type1_in, type2_in, type3_in, type4_in), (type1_out, type2_out, type3_out, type4_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED5_0(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 5, 0, (type1_in, type2_in, type3_in, type4_in, type5_in), ()) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED5_1(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 5, 1, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED5_2(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 5, 2, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out, type2_out)) |
| |
| #define IPC_SYNC_MESSAGE_ROUTED5_3(msg_class, type1_in, type2_in, type3_in, type4_in, type5_in, type1_out, type2_out, type3_out) \ |
| IPC_MESSAGE_DECL(SYNC, ROUTED, msg_class, 5, 3, (type1_in, type2_in, type3_in, type4_in, type5_in), (type1_out, type2_out, type3_out)) |
| |
| // The following macros define the common set of methods provided by ASYNC |
| // message classes. |
| // This macro is for all the async IPCs that don't pass an extra parameter using |
| // IPC_BEGIN_MESSAGE_MAP_WITH_PARAM. |
| #define IPC_ASYNC_MESSAGE_METHODS_GENERIC \ |
| template<class T, class S, class P, class Method> \ |
| static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \ |
| Method func) { \ |
| Schema::Param p; \ |
| if (Read(msg, &p)) { \ |
| DispatchToMethod(obj, func, p); \ |
| return true; \ |
| } \ |
| return false; \ |
| } |
| |
| // The following macros are for for async IPCs which have a dispatcher with an |
| // extra parameter specified using IPC_BEGIN_MESSAGE_MAP_WITH_PARAM. |
| #define IPC_ASYNC_MESSAGE_METHODS_1 \ |
| IPC_ASYNC_MESSAGE_METHODS_GENERIC \ |
| template<class T, class S, class P, typename TA> \ |
| static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \ |
| void (T::*func)(P*, TA)) { \ |
| Schema::Param p; \ |
| if (Read(msg, &p)) { \ |
| (obj->*func)(parameter, p.a); \ |
| return true; \ |
| } \ |
| return false; \ |
| } |
| #define IPC_ASYNC_MESSAGE_METHODS_2 \ |
| IPC_ASYNC_MESSAGE_METHODS_GENERIC \ |
| template<class T, class S, class P, typename TA, typename TB> \ |
| static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \ |
| void (T::*func)(P*, TA, TB)) { \ |
| Schema::Param p; \ |
| if (Read(msg, &p)) { \ |
| (obj->*func)(parameter, p.a, p.b); \ |
| return true; \ |
| } \ |
| return false; \ |
| } |
| #define IPC_ASYNC_MESSAGE_METHODS_3 \ |
| IPC_ASYNC_MESSAGE_METHODS_GENERIC \ |
| template<class T, class S, class P, typename TA, typename TB, typename TC> \ |
| static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \ |
| void (T::*func)(P*, TA, TB, TC)) { \ |
| Schema::Param p; \ |
| if (Read(msg, &p)) { \ |
| (obj->*func)(parameter, p.a, p.b, p.c); \ |
| return true; \ |
| } \ |
| return false; \ |
| } |
| #define IPC_ASYNC_MESSAGE_METHODS_4 \ |
| IPC_ASYNC_MESSAGE_METHODS_GENERIC \ |
| template<class T, class S, class P, typename TA, typename TB, typename TC, \ |
| typename TD> \ |
| static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \ |
| void (T::*func)(P*, TA, TB, TC, TD)) { \ |
| Schema::Param p; \ |
| if (Read(msg, &p)) { \ |
| (obj->*func)(parameter, p.a, p.b, p.c, p.d); \ |
| return true; \ |
| } \ |
| return false; \ |
| } |
| #define IPC_ASYNC_MESSAGE_METHODS_5 \ |
| IPC_ASYNC_MESSAGE_METHODS_GENERIC \ |
| template<class T, class S, class P, typename TA, typename TB, typename TC, \ |
| typename TD, typename TE> \ |
| static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \ |
| void (T::*func)(P*, TA, TB, TC, TD, TE)) { \ |
| Schema::Param p; \ |
| if (Read(msg, &p)) { \ |
| (obj->*func)(parameter, p.a, p.b, p.c, p.d, p.e); \ |
| return true; \ |
| } \ |
| return false; \ |
| } |
| |
| // The following macros define the common set of methods provided by SYNC |
| // message classes. |
| #define IPC_SYNC_MESSAGE_METHODS_GENERIC \ |
| template<class T, class S, class P, class Method> \ |
| static bool Dispatch(const Message* msg, T* obj, S* sender, P* parameter, \ |
| Method func) { \ |
| Schema::SendParam send_params; \ |
| bool ok = ReadSendParam(msg, &send_params); \ |
| return Schema::DispatchWithSendParams(ok, send_params, msg, obj, sender, \ |
| func); \ |
| } \ |
| template<class T, class P, class Method> \ |
| static bool DispatchDelayReply(const Message* msg, T* obj, P* parameter, \ |
| Method func) { \ |
| Schema::SendParam send_params; \ |
| bool ok = ReadSendParam(msg, &send_params); \ |
| return Schema::DispatchDelayReplyWithSendParams(ok, send_params, msg, \ |
| obj, func); \ |
| } |
| #define IPC_SYNC_MESSAGE_METHODS_0 \ |
| IPC_SYNC_MESSAGE_METHODS_GENERIC |
| #define IPC_SYNC_MESSAGE_METHODS_1 \ |
| IPC_SYNC_MESSAGE_METHODS_GENERIC \ |
| template<typename TA> \ |
| static void WriteReplyParams(Message* reply, TA a) { \ |
| Schema::WriteReplyParams(reply, a); \ |
| } |
| #define IPC_SYNC_MESSAGE_METHODS_2 \ |
| IPC_SYNC_MESSAGE_METHODS_GENERIC \ |
| template<typename TA, typename TB> \ |
| static void WriteReplyParams(Message* reply, TA a, TB b) { \ |
| Schema::WriteReplyParams(reply, a, b); \ |
| } |
| #define IPC_SYNC_MESSAGE_METHODS_3 \ |
| IPC_SYNC_MESSAGE_METHODS_GENERIC \ |
| template<typename TA, typename TB, typename TC> \ |
| static void WriteReplyParams(Message* reply, TA a, TB b, TC c) { \ |
| Schema::WriteReplyParams(reply, a, b, c); \ |
| } |
| #define IPC_SYNC_MESSAGE_METHODS_4 \ |
| IPC_SYNC_MESSAGE_METHODS_GENERIC \ |
| template<typename TA, typename TB, typename TC, typename TD> \ |
| static void WriteReplyParams(Message* reply, TA a, TB b, TC c, TD d) { \ |
| Schema::WriteReplyParams(reply, a, b, c, d); \ |
| } |
| #define IPC_SYNC_MESSAGE_METHODS_5 \ |
| IPC_SYNC_MESSAGE_METHODS_GENERIC \ |
| template<typename TA, typename TB, typename TC, typename TD, typename TE> \ |
| static void WriteReplyParams(Message* reply, TA a, TB b, TC c, TD d, TE e) { \ |
| Schema::WriteReplyParams(reply, a, b, c, d, e); \ |
| } |
| |
| // Common message macro which dispatches into one of the 6 (sync x kind) |
| // routines. There is a way that these 6 cases can be lumped together, |
| // but the macros get very complicated in that case. |
| // Note: intended be redefined to generate other information. |
| #define IPC_MESSAGE_DECL(sync, kind, msg_class, \ |
| in_cnt, out_cnt, in_list, out_list) \ |
| IPC_##sync##_##kind##_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| IPC_MESSAGE_EXTRA(sync, kind, msg_class, in_cnt, out_cnt, in_list, out_list) |
| |
| #define IPC_EMPTY_CONTROL_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| class IPC_MESSAGE_EXPORT msg_class : public IPC::Message { \ |
| public: \ |
| typedef IPC::Message Schema; \ |
| enum { ID = IPC_MESSAGE_ID() }; \ |
| msg_class() : IPC::Message(MSG_ROUTING_CONTROL, ID, PRIORITY_NORMAL) {} \ |
| static void Log(std::string* name, const Message* msg, std::string* l); \ |
| }; |
| |
| #define IPC_EMPTY_ROUTED_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| class IPC_MESSAGE_EXPORT msg_class : public IPC::Message { \ |
| public: \ |
| typedef IPC::Message Schema; \ |
| enum { ID = IPC_MESSAGE_ID() }; \ |
| msg_class(int32 routing_id) \ |
| : IPC::Message(routing_id, ID, PRIORITY_NORMAL) {} \ |
| static void Log(std::string* name, const Message* msg, std::string* l); \ |
| }; |
| |
| #define IPC_ASYNC_CONTROL_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| class IPC_MESSAGE_EXPORT msg_class : public IPC::Message { \ |
| public: \ |
| typedef IPC::MessageSchema<IPC_TUPLE_IN_##in_cnt in_list> Schema; \ |
| typedef Schema::Param Param; \ |
| enum { ID = IPC_MESSAGE_ID() }; \ |
| msg_class(IPC_TYPE_IN_##in_cnt in_list); \ |
| virtual ~msg_class(); \ |
| static bool Read(const Message* msg, Schema::Param* p); \ |
| static void Log(std::string* name, const Message* msg, std::string* l); \ |
| IPC_ASYNC_MESSAGE_METHODS_##in_cnt \ |
| }; |
| |
| #define IPC_ASYNC_ROUTED_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| class IPC_MESSAGE_EXPORT msg_class : public IPC::Message { \ |
| public: \ |
| typedef IPC::MessageSchema<IPC_TUPLE_IN_##in_cnt in_list> Schema; \ |
| typedef Schema::Param Param; \ |
| enum { ID = IPC_MESSAGE_ID() }; \ |
| msg_class(int32 routing_id IPC_COMMA_##in_cnt \ |
| IPC_TYPE_IN_##in_cnt in_list); \ |
| virtual ~msg_class(); \ |
| static bool Read(const Message* msg, Schema::Param* p); \ |
| static void Log(std::string* name, const Message* msg, std::string* l); \ |
| IPC_ASYNC_MESSAGE_METHODS_##in_cnt \ |
| }; |
| |
| #define IPC_SYNC_CONTROL_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| class IPC_MESSAGE_EXPORT msg_class : public IPC::SyncMessage { \ |
| public: \ |
| typedef IPC::SyncMessageSchema<IPC_TUPLE_IN_##in_cnt in_list, \ |
| IPC_TUPLE_OUT_##out_cnt out_list> Schema; \ |
| typedef Schema::ReplyParam ReplyParam; \ |
| typedef Schema::SendParam SendParam; \ |
| enum { ID = IPC_MESSAGE_ID() }; \ |
| msg_class(IPC_TYPE_IN_##in_cnt in_list \ |
| IPC_COMMA_AND_##in_cnt(IPC_COMMA_##out_cnt) \ |
| IPC_TYPE_OUT_##out_cnt out_list); \ |
| virtual ~msg_class(); \ |
| static bool ReadSendParam(const Message* msg, Schema::SendParam* p); \ |
| static bool ReadReplyParam( \ |
| const Message* msg, \ |
| TupleTypes<ReplyParam>::ValueTuple* p); \ |
| static void Log(std::string* name, const Message* msg, std::string* l); \ |
| IPC_SYNC_MESSAGE_METHODS_##out_cnt \ |
| }; |
| |
| #define IPC_SYNC_ROUTED_DECL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| class IPC_MESSAGE_EXPORT msg_class : public IPC::SyncMessage { \ |
| public: \ |
| typedef IPC::SyncMessageSchema<IPC_TUPLE_IN_##in_cnt in_list, \ |
| IPC_TUPLE_OUT_##out_cnt out_list> Schema; \ |
| typedef Schema::ReplyParam ReplyParam; \ |
| typedef Schema::SendParam SendParam; \ |
| enum { ID = IPC_MESSAGE_ID() }; \ |
| msg_class(int32 routing_id \ |
| IPC_COMMA_OR_##in_cnt(IPC_COMMA_##out_cnt) \ |
| IPC_TYPE_IN_##in_cnt in_list \ |
| IPC_COMMA_AND_##in_cnt(IPC_COMMA_##out_cnt) \ |
| IPC_TYPE_OUT_##out_cnt out_list); \ |
| virtual ~msg_class(); \ |
| static bool ReadSendParam(const Message* msg, Schema::SendParam* p); \ |
| static bool ReadReplyParam( \ |
| const Message* msg, \ |
| TupleTypes<ReplyParam>::ValueTuple* p); \ |
| static void Log(std::string* name, const Message* msg, std::string* l); \ |
| IPC_SYNC_MESSAGE_METHODS_##out_cnt \ |
| }; |
| |
| #if defined(IPC_MESSAGE_IMPL) |
| |
| // "Implementation" inclusion produces constructors, destructors, and |
| // logging functions, except for the no-arg special cases, where the |
| // implementation occurs in the declaration, and there is no special |
| // logging function. |
| #define IPC_MESSAGE_EXTRA(sync, kind, msg_class, \ |
| in_cnt, out_cnt, in_list, out_list) \ |
| IPC_##sync##_##kind##_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| IPC_##sync##_MESSAGE_LOG(msg_class) |
| |
| #define IPC_EMPTY_CONTROL_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) |
| #define IPC_EMPTY_ROUTED_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) |
| |
| #define IPC_ASYNC_CONTROL_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| msg_class::msg_class(IPC_TYPE_IN_##in_cnt in_list) : \ |
| IPC::Message(MSG_ROUTING_CONTROL, ID, PRIORITY_NORMAL) { \ |
| Schema::Write(this, IPC_NAME_IN_##in_cnt in_list); \ |
| } \ |
| msg_class::~msg_class() {} \ |
| bool msg_class::Read(const Message* msg, Schema::Param* p) { \ |
| return Schema::Read(msg, p); \ |
| } |
| |
| #define IPC_ASYNC_ROUTED_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| msg_class::msg_class(int32 routing_id IPC_COMMA_##in_cnt \ |
| IPC_TYPE_IN_##in_cnt in_list) : \ |
| IPC::Message(routing_id, ID, PRIORITY_NORMAL) { \ |
| Schema::Write(this, IPC_NAME_IN_##in_cnt in_list); \ |
| } \ |
| msg_class::~msg_class() {} \ |
| bool msg_class::Read(const Message* msg, Schema::Param* p) { \ |
| return Schema::Read(msg, p); \ |
| } |
| |
| #define IPC_SYNC_CONTROL_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| msg_class::msg_class(IPC_TYPE_IN_##in_cnt in_list \ |
| IPC_COMMA_AND_##in_cnt(IPC_COMMA_##out_cnt) \ |
| IPC_TYPE_OUT_##out_cnt out_list) : \ |
| IPC::SyncMessage(MSG_ROUTING_CONTROL, ID, PRIORITY_NORMAL, \ |
| new IPC::ParamDeserializer<Schema::ReplyParam>( \ |
| IPC_NAME_OUT_##out_cnt out_list)) { \ |
| Schema::Write(this, IPC_NAME_IN_##in_cnt in_list); \ |
| } \ |
| msg_class::~msg_class() {} \ |
| bool msg_class::ReadSendParam(const Message* msg, Schema::SendParam* p) { \ |
| return Schema::ReadSendParam(msg, p); \ |
| } \ |
| bool msg_class::ReadReplyParam(const Message* msg, \ |
| TupleTypes<ReplyParam>::ValueTuple* p) { \ |
| return Schema::ReadReplyParam(msg, p); \ |
| } |
| |
| #define IPC_SYNC_ROUTED_IMPL(msg_class, in_cnt, out_cnt, in_list, out_list) \ |
| msg_class::msg_class(int32 routing_id \ |
| IPC_COMMA_OR_##in_cnt(IPC_COMMA_##out_cnt) \ |
| IPC_TYPE_IN_##in_cnt in_list \ |
| IPC_COMMA_AND_##in_cnt(IPC_COMMA_##out_cnt) \ |
| IPC_TYPE_OUT_##out_cnt out_list) : \ |
| IPC::SyncMessage(routing_id, ID, PRIORITY_NORMAL, \ |
| new IPC::ParamDeserializer<Schema::ReplyParam>( \ |
| IPC_NAME_OUT_##out_cnt out_list)) { \ |
| Schema::Write(this, IPC_NAME_IN_##in_cnt in_list); \ |
| } \ |
| msg_class::~msg_class() {} \ |
| bool msg_class::ReadSendParam(const Message* msg, Schema::SendParam* p) { \ |
| return Schema::ReadSendParam(msg, p); \ |
| } \ |
| bool msg_class::ReadReplyParam(const Message* msg, \ |
| TupleTypes<ReplyParam>::ValueTuple* p) { \ |
| return Schema::ReadReplyParam(msg, p); \ |
| } |
| |
| #define IPC_EMPTY_MESSAGE_LOG(msg_class) \ |
| void msg_class::Log(std::string* name, \ |
| const Message* msg, \ |
| std::string* l) { \ |
| if (name) \ |
| *name = #msg_class; \ |
| } |
| |
| #define IPC_ASYNC_MESSAGE_LOG(msg_class) \ |
| void msg_class::Log(std::string* name, \ |
| const Message* msg, \ |
| std::string* l) { \ |
| if (name) \ |
| *name = #msg_class; \ |
| if (!msg || !l) \ |
| return; \ |
| Schema::Param p; \ |
| if (Schema::Read(msg, &p)) \ |
| IPC::LogParam(p, l); \ |
| } |
| |
| #define IPC_SYNC_MESSAGE_LOG(msg_class) \ |
| void msg_class::Log(std::string* name, \ |
| const Message* msg, \ |
| std::string* l) { \ |
| if (name) \ |
| *name = #msg_class; \ |
| if (!msg || !l) \ |
| return; \ |
| if (msg->is_sync()) { \ |
| TupleTypes<Schema::SendParam>::ValueTuple p; \ |
| if (Schema::ReadSendParam(msg, &p)) \ |
| IPC::LogParam(p, l); \ |
| AddOutputParamsToLog(msg, l); \ |
| } else { \ |
| TupleTypes<Schema::ReplyParam>::ValueTuple p; \ |
| if (Schema::ReadReplyParam(msg, &p)) \ |
| IPC::LogParam(p, l); \ |
| } \ |
| } |
| |
| #elif defined(IPC_MESSAGE_MACROS_LOG_ENABLED) |
| |
| #ifndef IPC_LOG_TABLE_ADD_ENTRY |
| #error You need to define IPC_LOG_TABLE_ADD_ENTRY(msg_id, logger) |
| #endif |
| |
| // "Log table" inclusion produces extra logging registration code. |
| #define IPC_MESSAGE_EXTRA(sync, kind, msg_class, \ |
| in_cnt, out_cnt, in_list, out_list) \ |
| class LoggerRegisterHelper##msg_class { \ |
| public: \ |
| LoggerRegisterHelper##msg_class() { \ |
| const uint32 msg_id = static_cast<uint32>(msg_class::ID); \ |
| IPC_LOG_TABLE_ADD_ENTRY(msg_id, msg_class::Log); \ |
| } \ |
| }; \ |
| LoggerRegisterHelper##msg_class g_LoggerRegisterHelper##msg_class; |
| |
| #else |
| |
| // Normal inclusion produces nothing extra. |
| #define IPC_MESSAGE_EXTRA(sync, kind, msg_class, \ |
| in_cnt, out_cnt, in_list, out_list) |
| |
| #endif // defined(IPC_MESSAGE_IMPL) |
| |
| // Handle variable sized argument lists. These are usually invoked by token |
| // pasting against the argument counts. |
| #define IPC_TYPE_IN_0() |
| #define IPC_TYPE_IN_1(t1) const t1& arg1 |
| #define IPC_TYPE_IN_2(t1, t2) const t1& arg1, const t2& arg2 |
| #define IPC_TYPE_IN_3(t1, t2, t3) const t1& arg1, const t2& arg2, const t3& arg3 |
| #define IPC_TYPE_IN_4(t1, t2, t3, t4) const t1& arg1, const t2& arg2, const t3& arg3, const t4& arg4 |
| #define IPC_TYPE_IN_5(t1, t2, t3, t4, t5) const t1& arg1, const t2& arg2, const t3& arg3, const t4& arg4, const t5& arg5 |
| |
| #define IPC_TYPE_OUT_0() |
| #define IPC_TYPE_OUT_1(t1) t1* arg6 |
| #define IPC_TYPE_OUT_2(t1, t2) t1* arg6, t2* arg7 |
| #define IPC_TYPE_OUT_3(t1, t2, t3) t1* arg6, t2* arg7, t3* arg8 |
| #define IPC_TYPE_OUT_4(t1, t2, t3, t4) t1* arg6, t2* arg7, t3* arg8, t4* arg9 |
| |
| #define IPC_TUPLE_IN_0() Tuple0 |
| #define IPC_TUPLE_IN_1(t1) Tuple1<t1> |
| #define IPC_TUPLE_IN_2(t1, t2) Tuple2<t1, t2> |
| #define IPC_TUPLE_IN_3(t1, t2, t3) Tuple3<t1, t2, t3> |
| #define IPC_TUPLE_IN_4(t1, t2, t3, t4) Tuple4<t1, t2, t3, t4> |
| #define IPC_TUPLE_IN_5(t1, t2, t3, t4, t5) Tuple5<t1, t2, t3, t4, t5> |
| |
| #define IPC_TUPLE_OUT_0() Tuple0 |
| #define IPC_TUPLE_OUT_1(t1) Tuple1<t1&> |
| #define IPC_TUPLE_OUT_2(t1, t2) Tuple2<t1&, t2&> |
| #define IPC_TUPLE_OUT_3(t1, t2, t3) Tuple3<t1&, t2&, t3&> |
| #define IPC_TUPLE_OUT_4(t1, t2, t3, t4) Tuple4<t1&, t2&, t3&, t4&> |
| |
| #define IPC_NAME_IN_0() MakeTuple() |
| #define IPC_NAME_IN_1(t1) MakeRefTuple(arg1) |
| #define IPC_NAME_IN_2(t1, t2) MakeRefTuple(arg1, arg2) |
| #define IPC_NAME_IN_3(t1, t2, t3) MakeRefTuple(arg1, arg2, arg3) |
| #define IPC_NAME_IN_4(t1, t2, t3, t4) MakeRefTuple(arg1, arg2, arg3, arg4) |
| #define IPC_NAME_IN_5(t1, t2, t3, t4, t5) MakeRefTuple(arg1, arg2, arg3, arg4, arg5) |
| |
| #define IPC_NAME_OUT_0() MakeTuple() |
| #define IPC_NAME_OUT_1(t1) MakeRefTuple(*arg6) |
| #define IPC_NAME_OUT_2(t1, t2) MakeRefTuple(*arg6, *arg7) |
| #define IPC_NAME_OUT_3(t1, t2, t3) MakeRefTuple(*arg6, *arg7, *arg8) |
| #define IPC_NAME_OUT_4(t1, t2, t3, t4) MakeRefTuple(*arg6, *arg7, *arg8, *arg9) |
| |
| // There are places where the syntax requires a comma if there are input args, |
| // if there are input args and output args, or if there are input args or |
| // output args. These macros allow generation of the comma as needed; invoke |
| // by token pasting against the argument counts. |
| #define IPC_COMMA_0 |
| #define IPC_COMMA_1 , |
| #define IPC_COMMA_2 , |
| #define IPC_COMMA_3 , |
| #define IPC_COMMA_4 , |
| #define IPC_COMMA_5 , |
| |
| #define IPC_COMMA_AND_0(x) |
| #define IPC_COMMA_AND_1(x) x |
| #define IPC_COMMA_AND_2(x) x |
| #define IPC_COMMA_AND_3(x) x |
| #define IPC_COMMA_AND_4(x) x |
| #define IPC_COMMA_AND_5(x) x |
| |
| #define IPC_COMMA_OR_0(x) x |
| #define IPC_COMMA_OR_1(x) , |
| #define IPC_COMMA_OR_2(x) , |
| #define IPC_COMMA_OR_3(x) , |
| #define IPC_COMMA_OR_4(x) , |
| #define IPC_COMMA_OR_5(x) , |
| |
| // Message IDs |
| // Note: we currently use __LINE__ to give unique IDs to messages within |
| // a file. They're globally unique since each file defines its own |
| // IPC_MESSAGE_START. |
| #define IPC_MESSAGE_ID() ((IPC_MESSAGE_START << 16) + __LINE__) |
| #define IPC_MESSAGE_ID_CLASS(id) ((id) >> 16) |
| #define IPC_MESSAGE_ID_LINE(id) ((id) & 0xffff) |
| |
| // Message crackers and handlers. Usage: |
| // |
| // bool MyClass::OnMessageReceived(const IPC::Message& msg) { |
| // bool handled = true; |
| // IPC_BEGIN_MESSAGE_MAP(MyClass, msg) |
| // IPC_MESSAGE_HANDLER(MsgClassOne, OnMsgClassOne) |
| // ...more handlers here ... |
| // IPC_MESSAGE_HANDLER(MsgClassTen, OnMsgClassTen) |
| // IPC_MESSAGE_UNHANDLED(handled = false) |
| // IPC_END_MESSAGE_MAP() |
| // return handled; |
| // } |
| |
| |
| #define IPC_BEGIN_MESSAGE_MAP(class_name, msg) \ |
| { \ |
| typedef class_name _IpcMessageHandlerClass ALLOW_UNUSED; \ |
| void* param__ = NULL; \ |
| const IPC::Message& ipc_message__ = msg; \ |
| switch (ipc_message__.type()) { |
| |
| // gcc gives the following error now when using decltype so type typeof there: |
| // error: identifier 'decltype' will become a keyword in C++0x [-Werror=c++0x-compat] |
| #if defined(OS_WIN) |
| #define IPC_DECLTYPE decltype |
| #else |
| #define IPC_DECLTYPE typeof |
| #endif |
| |
| #define IPC_BEGIN_MESSAGE_MAP_WITH_PARAM(class_name, msg, param) \ |
| { \ |
| typedef class_name _IpcMessageHandlerClass ALLOW_UNUSED; \ |
| IPC_DECLTYPE(param) param__ = param; \ |
| const IPC::Message& ipc_message__ = msg; \ |
| switch (ipc_message__.type()) { |
| |
| #define IPC_MESSAGE_FORWARD(msg_class, obj, member_func) \ |
| case msg_class::ID: { \ |
| TRACK_RUN_IN_THIS_SCOPED_REGION(member_func); \ |
| if (!msg_class::Dispatch(&ipc_message__, obj, this, param__, \ |
| &member_func)) \ |
| ipc_message__.set_dispatch_error(); \ |
| } \ |
| break; |
| |
| #define IPC_MESSAGE_HANDLER(msg_class, member_func) \ |
| IPC_MESSAGE_FORWARD(msg_class, this, _IpcMessageHandlerClass::member_func) |
| |
| #define IPC_MESSAGE_FORWARD_DELAY_REPLY(msg_class, obj, member_func) \ |
| case msg_class::ID: { \ |
| TRACK_RUN_IN_THIS_SCOPED_REGION(member_func); \ |
| if (!msg_class::DispatchDelayReply(&ipc_message__, obj, param__, \ |
| &member_func)) \ |
| ipc_message__.set_dispatch_error(); \ |
| } \ |
| break; |
| |
| #define IPC_MESSAGE_HANDLER_DELAY_REPLY(msg_class, member_func) \ |
| IPC_MESSAGE_FORWARD_DELAY_REPLY(msg_class, this, \ |
| _IpcMessageHandlerClass::member_func) |
| |
| // TODO(jar): fix chrome frame to always supply |code| argument. |
| #define IPC_MESSAGE_HANDLER_GENERIC(msg_class, code) \ |
| case msg_class::ID: { \ |
| /* TRACK_RUN_IN_THIS_SCOPED_REGION(code); TODO(jar) */ \ |
| code; \ |
| } \ |
| break; |
| |
| #define IPC_REPLY_HANDLER(func) \ |
| case IPC_REPLY_ID: { \ |
| TRACK_RUN_IN_THIS_SCOPED_REGION(func); \ |
| func(ipc_message__); \ |
| } \ |
| break; |
| |
| |
| #define IPC_MESSAGE_UNHANDLED(code) \ |
| default: { \ |
| code; \ |
| } \ |
| break; |
| |
| #define IPC_MESSAGE_UNHANDLED_ERROR() \ |
| IPC_MESSAGE_UNHANDLED(NOTREACHED() << \ |
| "Invalid message with type = " << \ |
| ipc_message__.type()) |
| |
| #define IPC_END_MESSAGE_MAP() \ |
| } \ |
| } |
| |
| // This corresponds to an enum value from IPCMessageStart. |
| #define IPC_MESSAGE_CLASS(message) \ |
| IPC_MESSAGE_ID_CLASS(message.type()) |
| |
| #endif // IPC_IPC_MESSAGE_MACROS_H_ |
| |
| // The following #ifdef cannot be removed. Although the code is semantically |
| // equivalent without the #ifdef, VS2013 contains a bug where it is |
| // over-aggressive in optimizing out #includes. Putting the #ifdef is a |
| // workaround for this bug. See http://goo.gl/eGt2Fb for more details. |
| // This can be removed once VS2013 is fixed. |
| #ifdef IPC_MESSAGE_START |
| // Clean up IPC_MESSAGE_START in this unguarded section so that the |
| // XXX_messages.h files need not do so themselves. This makes the |
| // XXX_messages.h files easier to write. |
| #undef IPC_MESSAGE_START |
| #endif |