| "\t\t(all)" = "\t\t(all)"; |
| "\t\t(none)" = "\t\t(none)"; |
| "\t%d entries" = "\t%d entries"; |
| "\t%s" = "\t%s"; |
| "\tAfter fault: continue" = "\tAfter fault: continue"; |
| "\tAlerts: %s" = "\tAlerts: %s"; |
| "\tBanner required" = "\tBanner required"; |
| "\tCharset sets:" = "\tCharset sets:"; |
| "\tConnection: direct" = "\tConnection: direct"; |
| "\tConnection: remote" = "\tConnection: remote"; |
| "\tContent types: any" = "\tContent types: any"; |
| "\tDefault page size:" = "\tDefault page size:"; |
| "\tDefault pitch:" = "\tDefault pitch:"; |
| "\tDefault port settings:" = "\tDefault port settings:"; |
| "\tDescription: %s" = "\tDescription: %s"; |
| "\tForm mounted:" = "\tForm mounted:"; |
| "\tForms allowed:" = "\tForms allowed:"; |
| "\tInterface: %s.ppd" = "\tInterface: %s.ppd"; |
| "\tInterface: %s/ppd/%s.ppd" = "\tInterface: %s/ppd/%s.ppd"; |
| "\tLocation: %s" = "\tLocation: %s"; |
| "\tOn fault: no alert" = "\tOn fault: no alert"; |
| "\tPrinter types: unknown" = "\tPrinter types: unknown"; |
| "\tStatus: %s" = "\tStatus: %s"; |
| "\tUsers allowed:" = "\tUsers allowed:"; |
| "\tUsers denied:" = "\tUsers denied:"; |
| "\tdaemon present" = "\tdaemon present"; |
| "\tno entries" = "\tno entries"; |
| "\tprinter is on device '%s' speed -1" = "\tprinter is on device ‘%s’ speed -1"; |
| "\tprinting is disabled" = "\tprinting is disabled"; |
| "\tprinting is enabled" = "\tprinting is enabled"; |
| "\tqueued for %s" = "\tqueued for %s"; |
| "\tqueuing is disabled" = "\tqueuing is disabled"; |
| "\tqueuing is enabled" = "\tqueuing is enabled"; |
| "\treason unknown" = "\treason unknown"; |
| "\n DETAILED CONFORMANCE TEST RESULTS" = "\n DETAILED CONFORMANCE TEST RESULTS"; |
| " REF: Page 15, section 3.1." = " REF: Page 15, section 3.1."; |
| " REF: Page 15, section 3.2." = " REF: Page 15, section 3.2."; |
| " REF: Page 19, section 3.3." = " REF: Page 19, section 3.3."; |
| " REF: Page 20, section 3.4." = " REF: Page 20, section 3.4."; |
| " REF: Page 27, section 3.5." = " REF: Page 27, section 3.5."; |
| " REF: Page 42, section 5.2." = " REF: Page 42, section 5.2."; |
| " REF: Pages 16-17, section 3.2." = " REF: Pages 16-17, section 3.2."; |
| " REF: Pages 42-45, section 5.2." = " REF: Pages 42-45, section 5.2."; |
| " REF: Pages 45-46, section 5.2." = " REF: Pages 45-46, section 5.2."; |
| " REF: Pages 48-49, section 5.2." = " REF: Pages 48-49, section 5.2."; |
| " REF: Pages 52-54, section 5.2." = " REF: Pages 52-54, section 5.2."; |
| " %-39.39s %.0f bytes" = " %-39.39s %.0f bytes"; |
| " PASS Default%s" = " PASS Default%s"; |
| " PASS DefaultImageableArea" = " PASS DefaultImageableArea"; |
| " PASS DefaultPaperDimension" = " PASS DefaultPaperDimension"; |
| " PASS FileVersion" = " PASS FileVersion"; |
| " PASS FormatVersion" = " PASS FormatVersion"; |
| " PASS LanguageEncoding" = " PASS LanguageEncoding"; |
| " PASS LanguageVersion" = " PASS LanguageVersion"; |
| " PASS Manufacturer" = " PASS Manufacturer"; |
| " PASS ModelName" = " PASS ModelName"; |
| " PASS NickName" = " PASS NickName"; |
| " PASS PCFileName" = " PASS PCFileName"; |
| " PASS PSVersion" = " PASS PSVersion"; |
| " PASS PageRegion" = " PASS PageRegion"; |
| " PASS PageSize" = " PASS PageSize"; |
| " PASS Product" = " PASS Product"; |
| " PASS ShortNickName" = " PASS ShortNickName"; |
| " WARN %s has no corresponding options." = " WARN %s has no corresponding options."; |
| " WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2." = " WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2."; |
| " WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17" = " WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17"; |
| " WARN File contains a mix of CR, LF, and CR LF line endings." = " WARN File contains a mix of CR, LF, and CR LF line endings."; |
| " WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3." = " WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3."; |
| " WARN Line %d only contains whitespace." = " WARN Line %d only contains whitespace."; |
| " WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3." = " WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3."; |
| " WARN Non-Windows PPD files should use lines ending with only LF, not CR LF." = " WARN Non-Windows PPD files should use lines ending with only LF, not CR LF."; |
| " WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2." = " WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2."; |
| " WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3."; |
| " WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3."; |
| " WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7."; |
| " WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7."; |
| " WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3." = " WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3."; |
| " %s \"%s %s\" conflicts with \"%s %s\"\n (constraint=\"%s %s %s %s\")." = " %s “%s %s” conflicts with “%s %s”\n (constraint=“%s %s %s %s”)."; |
| " %s %s %s does not exist." = " %s %s %s does not exist."; |
| " %s %s file \"%s\" has the wrong capitalization." = " %s %s file “%s” has the wrong capitalization."; |
| " %s Bad %s choice %s.\n REF: Page 122, section 5.17" = " %s Bad %s choice %s.\n REF: Page 122, section 5.17"; |
| " %s Bad UTF-8 \"%s\" translation string for option %s, choice %s." = " %s Bad UTF-8 “%s” translation string for option %s, choice %s."; |
| " %s Bad UTF-8 \"%s\" translation string for option %s." = " %s Bad UTF-8 “%s” translation string for option %s."; |
| " %s Bad cupsFilter value \"%s\"." = " %s Bad cupsFilter value “%s”."; |
| " %s Bad cupsFilter2 value \"%s\"." = " %s Bad cupsFilter2 value “%s”."; |
| " %s Bad cupsICCProfile %s." = " %s Bad cupsICCProfile %s."; |
| " %s Bad cupsPreFilter value \"%s\"." = " %s Bad cupsPreFilter value “%s”."; |
| " %s Bad cupsUIConstraints %s: \"%s\"" = " %s Bad cupsUIConstraints %s: “%s”"; |
| " %s Bad language \"%s\"." = " %s Bad language “%s”."; |
| " %s Bad permissions on %s file \"%s\"." = " %s Bad permissions on %s file “%s”."; |
| " %s Bad spelling of %s - should be %s." = " %s Bad spelling of %s - should be %s."; |
| " %s Cannot provide both APScanAppPath and APScanAppBundleID." = " %s Cannot provide both APScanAppPath and APScanAppBundleID."; |
| " %s Default choices conflicting." = " %s Default choices conflicting."; |
| " %s Empty cupsUIConstraints %s" = " %s Empty cupsUIConstraints %s"; |
| " %s Missing \"%s\" translation string for option %s, choice %s." = " %s Missing “%s” translation string for option %s, choice %s."; |
| " %s Missing \"%s\" translation string for option %s." = " %s Missing “%s” translation string for option %s."; |
| " %s Missing %s file \"%s\"." = " %s Missing %s file “%s”."; |
| " %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14." = " %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14."; |
| " %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14." = " %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14."; |
| " %s Missing choice *%s %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing choice *%s %s in UIConstraints “*%s %s *%s %s”."; |
| " %s Missing choice *%s %s in cupsUIConstraints %s: \"%s\"" = " %s Missing choice *%s %s in cupsUIConstraints %s: “%s”"; |
| " %s Missing cupsUIResolver %s" = " %s Missing cupsUIResolver %s"; |
| " %s Missing option %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing option %s in UIConstraints “*%s %s *%s %s”."; |
| " %s Missing option %s in cupsUIConstraints %s: \"%s\"" = " %s Missing option %s in cupsUIConstraints %s: “%s”"; |
| " %s No base translation \"%s\" is included in file." = " %s No base translation “%s” is included in file."; |
| " %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17" = " %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17"; |
| " %s Size \"%s\" defined for %s but not for %s." = " %s Size “%s” defined for %s but not for %s."; |
| " %s Size \"%s\" has unexpected dimensions (%gx%g)." = " %s Size “%s” has unexpected dimensions (%gx%g)."; |
| " %s Size \"%s\" should be \"%s\"." = " %s Size “%s” should be “%s”."; |
| " %s Size \"%s\" should be the Adobe standard name \"%s\"." = " %s Size “%s” should be the Adobe standard name “%s”."; |
| " %s cupsICCProfile %s hash value collides with %s." = " %s cupsICCProfile %s hash value collides with %s."; |
| " %s cupsUIResolver %s causes a loop." = " %s cupsUIResolver %s causes a loop."; |
| " %s cupsUIResolver %s does not list at least two different options." = " %s cupsUIResolver %s does not list at least two different options."; |
| " **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5" = " **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5"; |
| " **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5." = " **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5."; |
| " **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15." = " **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15."; |
| " **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15." = " **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15."; |
| " **FAIL** Bad FileVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FileVersion “%s”\n REF: Page 56, section 5.3."; |
| " **FAIL** Bad FormatVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FormatVersion “%s”\n REF: Page 56, section 5.3."; |
| " **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4." = " **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4."; |
| " **FAIL** Bad LanguageEncoding %s - must be ISOLatin1." = " **FAIL** Bad LanguageEncoding %s - must be ISOLatin1."; |
| " **FAIL** Bad LanguageVersion %s - must be English." = " **FAIL** Bad LanguageVersion %s - must be English."; |
| " **FAIL** Bad Manufacturer (should be \"%s\")\n REF: Page 211, table D.1." = " **FAIL** Bad Manufacturer (should be “%s”)\n REF: Page 211, table D.1."; |
| " **FAIL** Bad ModelName - \"%c\" not allowed in string.\n REF: Pages 59-60, section 5.3." = " **FAIL** Bad ModelName - “%c” not allowed in string.\n REF: Pages 59-60, section 5.3."; |
| " **FAIL** Bad PSVersion - not \"(string) int\".\n REF: Pages 62-64, section 5.3." = " **FAIL** Bad PSVersion - not “(string) int”.\n REF: Pages 62-64, section 5.3."; |
| " **FAIL** Bad Product - not \"(string)\".\n REF: Page 62, section 5.3." = " **FAIL** Bad Product - not “(string)”.\n REF: Page 62, section 5.3."; |
| " **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3." = " **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3."; |
| " **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9" = " **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9"; |
| " **FAIL** Default option code cannot be interpreted: %s" = " **FAIL** Default option code cannot be interpreted: %s"; |
| " **FAIL** Default translation string for option %s choice %s contains 8-bit characters." = " **FAIL** Default translation string for option %s choice %s contains 8-bit characters."; |
| " **FAIL** Default translation string for option %s contains 8-bit characters." = " **FAIL** Default translation string for option %s contains 8-bit characters."; |
| " **FAIL** Group names %s and %s differ only by case." = " **FAIL** Group names %s and %s differ only by case."; |
| " **FAIL** Multiple occurrences of option %s choice name %s." = " **FAIL** Multiple occurrences of option %s choice name %s."; |
| " **FAIL** Option %s choice names %s and %s differ only by case." = " **FAIL** Option %s choice names %s and %s differ only by case."; |
| " **FAIL** Option names %s and %s differ only by case." = " **FAIL** Option names %s and %s differ only by case."; |
| " **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5." = " **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5."; |
| " **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15."; |
| " **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15."; |
| " **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3."; |
| " **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3."; |
| " **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15."; |
| " **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3." = " **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3."; |
| " **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3." = " **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3."; |
| " **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3." = " **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3."; |
| " **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3." = " **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3."; |
| " **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3." = " **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3."; |
| " **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3." = " **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3."; |
| " **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3." = " **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3."; |
| " **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14." = " **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14."; |
| " **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14."; |
| " **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14."; |
| " **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15."; |
| " **FAIL** REQUIRED Product\n REF: Page 62, section 5.3." = " **FAIL** REQUIRED Product\n REF: Page 62, section 5.3."; |
| " **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3." = " **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3."; |
| " **FAIL** Unable to open PPD file - %s on line %d." = " **FAIL** Unable to open PPD file - %s on line %d."; |
| " %d ERRORS FOUND" = " %d ERRORS FOUND"; |
| " NO ERRORS FOUND" = " NO ERRORS FOUND"; |
| " --cr End lines with CR (Mac OS 9)." = " --cr End lines with CR (Mac OS 9)."; |
| " --crlf End lines with CR + LF (Windows)." = " --crlf End lines with CR + LF (Windows)."; |
| " --lf End lines with LF (UNIX/Linux/macOS)." = " --lf End lines with LF (UNIX/Linux/macOS)."; |
| " --list-filters List filters that will be used." = " --list-filters List filters that will be used."; |
| " -D Remove the input file when finished." = " -D Remove the input file when finished."; |
| " -D name=value Set named variable to value." = " -D name=value Set named variable to value."; |
| " -I include-dir Add include directory to search path." = " -I include-dir Add include directory to search path."; |
| " -P filename.ppd Set PPD file." = " -P filename.ppd Set PPD file."; |
| " -U username Specify username." = " -U username Specify username."; |
| " -c catalog.po Load the specified message catalog." = " -c catalog.po Load the specified message catalog."; |
| " -c cups-files.conf Set cups-files.conf file to use." = " -c cups-files.conf Set cups-files.conf file to use."; |
| " -d output-dir Specify the output directory." = " -d output-dir Specify the output directory."; |
| " -d printer Use the named printer." = " -d printer Use the named printer."; |
| " -e Use every filter from the PPD file." = " -e Use every filter from the PPD file."; |
| " -i mime/type Set input MIME type (otherwise auto-typed)." = " -i mime/type Set input MIME type (otherwise auto-typed)."; |
| " -j job-id[,N] Filter file N from the specified job (default is file 1)." = " -j job-id[,N] Filter file N from the specified job (default is file 1)."; |
| " -l lang[,lang,...] Specify the output language(s) (locale)." = " -l lang[,lang,…] Specify the output language(s) (locale)."; |
| " -m Use the ModelName value as the filename." = " -m Use the ModelName value as the filename."; |
| " -m mime/type Set output MIME type (otherwise application/pdf)." = " -m mime/type Set output MIME type (otherwise application/pdf)."; |
| " -n copies Set number of copies." = " -n copies Set number of copies."; |
| " -o filename.drv Set driver information file (otherwise ppdi.drv)." = " -o filename.drv Set driver information file (otherwise ppdi.drv)."; |
| " -o filename.ppd[.gz] Set output file (otherwise stdout)." = " -o filename.ppd[.gz] Set output file (otherwise stdout)."; |
| " -o name=value Set option(s)." = " -o name=value Set option(s)."; |
| " -p filename.ppd Set PPD file." = " -p filename.ppd Set PPD file."; |
| " -t Test PPDs instead of generating them." = " -t Test PPDs instead of generating them."; |
| " -t title Set title." = " -t title Set title."; |
| " -u Remove the PPD file when finished." = " -u Remove the PPD file when finished."; |
| " -v Be verbose." = " -v Be verbose."; |
| " -z Compress PPD files using GNU zip." = " -z Compress PPD files using GNU zip."; |
| " FAIL" = " FAIL"; |
| " PASS" = " PASS"; |
| "! expression Unary NOT of expression" = "! expression Unary NOT of expression"; |
| "\"%s\": Bad URI value \"%s\" - %s (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - %s (RFC 8011 section 5.1.6)."; |
| "\"%s\": Bad URI value \"%s\" - bad length %d (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - bad length %d (RFC 8011 section 5.1.6)."; |
| "\"%s\": Bad attribute name - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - bad length %d (RFC 8011 section 5.1.4)."; |
| "\"%s\": Bad attribute name - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - invalid character (RFC 8011 section 5.1.4)."; |
| "\"%s\": Bad boolean value %d (RFC 8011 section 5.1.21)." = "“%s”: Bad boolean value %d (RFC 8011 section 5.1.21)."; |
| "\"%s\": Bad charset value \"%s\" - bad characters (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad characters (RFC 8011 section 5.1.8)."; |
| "\"%s\": Bad charset value \"%s\" - bad length %d (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad length %d (RFC 8011 section 5.1.8)."; |
| "\"%s\": Bad dateTime UTC hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC hours %u (RFC 8011 section 5.1.15)."; |
| "\"%s\": Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15)."; |
| "\"%s\": Bad dateTime UTC sign '%c' (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC sign ‘%c’ (RFC 8011 section 5.1.15)."; |
| "\"%s\": Bad dateTime day %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime day %u (RFC 8011 section 5.1.15)."; |
| "\"%s\": Bad dateTime deciseconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime deciseconds %u (RFC 8011 section 5.1.15)."; |
| "\"%s\": Bad dateTime hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime hours %u (RFC 8011 section 5.1.15)."; |
| "\"%s\": Bad dateTime minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime minutes %u (RFC 8011 section 5.1.15)."; |
| "\"%s\": Bad dateTime month %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime month %u (RFC 8011 section 5.1.15)."; |
| "\"%s\": Bad dateTime seconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime seconds %u (RFC 8011 section 5.1.15)."; |
| "\"%s\": Bad enum value %d - out of range (RFC 8011 section 5.1.5)." = "“%s”: Bad enum value %d - out of range (RFC 8011 section 5.1.5)."; |
| "\"%s\": Bad keyword value \"%s\" - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - bad length %d (RFC 8011 section 5.1.4)."; |
| "\"%s\": Bad keyword value \"%s\" - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - invalid character (RFC 8011 section 5.1.4)."; |
| "\"%s\": Bad mimeMediaType value \"%s\" - bad characters (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad characters (RFC 8011 section 5.1.10)."; |
| "\"%s\": Bad mimeMediaType value \"%s\" - bad length %d (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad length %d (RFC 8011 section 5.1.10)."; |
| "\"%s\": Bad name value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.3)."; |
| "\"%s\": Bad name value \"%s\" - bad control character (PWG 5100.14 section 8.1)." = "“%s”: Bad name value “%s” - bad control character (PWG 5100.14 section 8.1)."; |
| "\"%s\": Bad name value \"%s\" - bad length %d (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad length %d (RFC 8011 section 5.1.3)."; |
| "\"%s\": Bad naturalLanguage value \"%s\" - bad characters (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad characters (RFC 8011 section 5.1.9)."; |
| "\"%s\": Bad naturalLanguage value \"%s\" - bad length %d (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad length %d (RFC 8011 section 5.1.9)."; |
| "\"%s\": Bad octetString value - bad length %d (RFC 8011 section 5.1.20)." = "“%s”: Bad octetString value - bad length %d (RFC 8011 section 5.1.20)."; |
| "\"%s\": Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14)." = "“%s”: Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14)."; |
| "\"%s\": Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16)."; |
| "\"%s\": Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16)."; |
| "\"%s\": Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16)."; |
| "\"%s\": Bad text value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.2)."; |
| "\"%s\": Bad text value \"%s\" - bad control character (PWG 5100.14 section 8.3)." = "“%s”: Bad text value “%s” - bad control character (PWG 5100.14 section 8.3)."; |
| "\"%s\": Bad text value \"%s\" - bad length %d (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad length %d (RFC 8011 section 5.1.2)."; |
| "\"%s\": Bad uriScheme value \"%s\" - bad characters (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad characters (RFC 8011 section 5.1.7)."; |
| "\"%s\": Bad uriScheme value \"%s\" - bad length %d (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad length %d (RFC 8011 section 5.1.7)."; |
| "\"requesting-user-name\" attribute in wrong group." = "“requesting-user-name” attribute in wrong group."; |
| "\"requesting-user-name\" attribute with wrong syntax." = "“requesting-user-name” attribute with wrong syntax."; |
| "%-7s %-7.7s %-7d %-31.31s %.0f bytes" = "%-7s %-7.7s %-7d %-31.31s %.0f bytes"; |
| "%d x %d mm" = "%d x %d mm"; |
| "%g x %g \"" = "%g x %g ″"; |
| "%s (%s)" = "%s (%s)"; |
| "%s (%s, %s)" = "%s (%s, %s)"; |
| "%s (Borderless)" = "%s (Borderless)"; |
| "%s (Borderless, %s)" = "%s (Borderless, %s)"; |
| "%s (Borderless, %s, %s)" = "%s (Borderless, %s, %s)"; |
| "%s accepting requests since %s" = "%s accepting requests since %s"; |
| "%s cannot be changed." = "%s cannot be changed."; |
| "%s is not implemented by the CUPS version of lpc." = "%s is not implemented by the CUPS version of lpc."; |
| "%s is not ready" = "%s is not ready"; |
| "%s is ready" = "%s is ready"; |
| "%s is ready and printing" = "%s is ready and printing"; |
| "%s job-id user title copies options [file]" = "%s job-id user title copies options [file]"; |
| "%s not accepting requests since %s -" = "%s not accepting requests since %s -"; |
| "%s not supported." = "%s not supported."; |
| "%s/%s accepting requests since %s" = "%s/%s accepting requests since %s"; |
| "%s/%s not accepting requests since %s -" = "%s/%s not accepting requests since %s -"; |
| "%s: %-33.33s [job %d localhost]" = "%s: %-33.33s [job %d localhost]"; |
| // TRANSLATORS: Message is "subject: error" |
| "%s: %s" = "%s: %s"; |
| "%s: %s failed: %s" = "%s: %s failed: %s"; |
| "%s: Bad printer URI \"%s\"." = "%s: Bad printer URI “%s”."; |
| "%s: Bad version %s for \"-V\"." = "%s: Bad version %s for “-V”."; |
| "%s: Don't know what to do." = "%s: Don’t know what to do."; |
| "%s: Error - %s" = "%s: Error - %s"; |
| "%s: Error - %s environment variable names non-existent destination \"%s\"." = "%s: Error - %s environment variable names non-existent destination “%s”."; |
| "%s: Error - add '/version=1.1' to server name." = "%s: Error - add ‘/version=1.1’ to server name."; |
| "%s: Error - bad job ID." = "%s: Error - bad job ID."; |
| "%s: Error - cannot print files and alter jobs simultaneously." = "%s: Error - cannot print files and alter jobs simultaneously."; |
| "%s: Error - cannot print from stdin if files or a job ID are provided." = "%s: Error - cannot print from stdin if files or a job ID are provided."; |
| "%s: Error - copies must be 1 or more." = "%s: Error - copies must be 1 or more."; |
| "%s: Error - expected character set after \"-S\" option." = "%s: Error - expected character set after “-S” option."; |
| "%s: Error - expected content type after \"-T\" option." = "%s: Error - expected content type after “-T” option."; |
| "%s: Error - expected copies after \"-#\" option." = "%s: Error - expected copies after “-#” option."; |
| "%s: Error - expected copies after \"-n\" option." = "%s: Error - expected copies after “-n” option."; |
| "%s: Error - expected destination after \"-P\" option." = "%s: Error - expected destination after “-P” option."; |
| "%s: Error - expected destination after \"-d\" option." = "%s: Error - expected destination after “-d” option."; |
| "%s: Error - expected form after \"-f\" option." = "%s: Error - expected form after “-f” option."; |
| "%s: Error - expected hold name after \"-H\" option." = "%s: Error - expected hold name after “-H” option."; |
| "%s: Error - expected hostname after \"-H\" option." = "%s: Error - expected hostname after “-H” option."; |
| "%s: Error - expected hostname after \"-h\" option." = "%s: Error - expected hostname after “-h” option."; |
| "%s: Error - expected mode list after \"-y\" option." = "%s: Error - expected mode list after “-y” option."; |
| "%s: Error - expected name after \"-%c\" option." = "%s: Error - expected name after “-%c” option."; |
| "%s: Error - expected option=value after \"-o\" option." = "%s: Error - expected option=value after “-o” option."; |
| "%s: Error - expected page list after \"-P\" option." = "%s: Error - expected page list after “-P” option."; |
| "%s: Error - expected priority after \"-%c\" option." = "%s: Error - expected priority after “-%c” option."; |
| "%s: Error - expected reason text after \"-r\" option." = "%s: Error - expected reason text after “-r” option."; |
| "%s: Error - expected title after \"-t\" option." = "%s: Error - expected title after “-t” option."; |
| "%s: Error - expected username after \"-U\" option." = "%s: Error - expected username after “-U” option."; |
| "%s: Error - expected username after \"-u\" option." = "%s: Error - expected username after “-u” option."; |
| "%s: Error - expected value after \"-%c\" option." = "%s: Error - expected value after “-%c” option."; |
| "%s: Error - need \"completed\", \"not-completed\", or \"all\" after \"-W\" option." = "%s: Error - need “completed”, “not-completed”, or “all” after “-W” option."; |
| "%s: Error - no default destination available." = "%s: Error - no default destination available."; |
| "%s: Error - priority must be between 1 and 100." = "%s: Error - priority must be between 1 and 100."; |
| "%s: Error - scheduler not responding." = "%s: Error - scheduler not responding."; |
| "%s: Error - too many files - \"%s\"." = "%s: Error - too many files - “%s”."; |
| "%s: Error - unable to access \"%s\" - %s" = "%s: Error - unable to access “%s” - %s"; |
| "%s: Error - unable to queue from stdin - %s." = "%s: Error - unable to queue from stdin - %s."; |
| "%s: Error - unknown destination \"%s\"." = "%s: Error - unknown destination “%s”."; |
| "%s: Error - unknown destination \"%s/%s\"." = "%s: Error - unknown destination “%s/%s”."; |
| "%s: Error - unknown option \"%c\"." = "%s: Error - unknown option “%c”."; |
| "%s: Error - unknown option \"%s\"." = "%s: Error - unknown option “%s”."; |
| "%s: Expected job ID after \"-i\" option." = "%s: Expected job ID after “-i” option."; |
| "%s: Invalid destination name in list \"%s\"." = "%s: Invalid destination name in list “%s”."; |
| "%s: Invalid filter string \"%s\"." = "%s: Invalid filter string “%s”."; |
| "%s: Missing filename for \"-P\"." = "%s: Missing filename for “-P”."; |
| "%s: Missing timeout for \"-T\"." = "%s: Missing timeout for “-T”."; |
| "%s: Missing version for \"-V\"." = "%s: Missing version for “-V”."; |
| "%s: Need job ID (\"-i jobid\") before \"-H restart\"." = "%s: Need job ID (“-i jobid”) before “-H restart”."; |
| "%s: No filter to convert from %s/%s to %s/%s." = "%s: No filter to convert from %s/%s to %s/%s."; |
| "%s: Operation failed: %s" = "%s: Operation failed: %s"; |
| "%s: Sorry, no encryption support." = "%s: Sorry, no encryption support."; |
| "%s: Unable to connect to \"%s:%d\": %s" = "%s: Unable to connect to “%s:%d”: %s"; |
| "%s: Unable to connect to server." = "%s: Unable to connect to server."; |
| "%s: Unable to contact server." = "%s: Unable to contact server."; |
| "%s: Unable to create PPD file: %s" = "%s: Unable to create PPD file: %s"; |
| "%s: Unable to determine MIME type of \"%s\"." = "%s: Unable to determine MIME type of “%s”."; |
| "%s: Unable to open \"%s\": %s" = "%s: Unable to open “%s”: %s"; |
| "%s: Unable to open %s: %s" = "%s: Unable to open %s: %s"; |
| "%s: Unable to open PPD file: %s on line %d." = "%s: Unable to open PPD file: %s on line %d."; |
| "%s: Unable to query printer: %s" = "%s: Unable to query printer: %s"; |
| "%s: Unable to read MIME database from \"%s\" or \"%s\"." = "%s: Unable to read MIME database from “%s” or “%s”."; |
| "%s: Unable to resolve \"%s\"." = "%s: Unable to resolve “%s”."; |
| "%s: Unknown argument \"%s\"." = "%s: Unknown argument “%s”."; |
| "%s: Unknown destination \"%s\"." = "%s: Unknown destination “%s”."; |
| "%s: Unknown destination MIME type %s/%s." = "%s: Unknown destination MIME type %s/%s."; |
| "%s: Unknown option \"%c\"." = "%s: Unknown option “%c”."; |
| "%s: Unknown option \"%s\"." = "%s: Unknown option “%s”."; |
| "%s: Unknown option \"-%c\"." = "%s: Unknown option “-%c”."; |
| "%s: Unknown source MIME type %s/%s." = "%s: Unknown source MIME type %s/%s."; |
| "%s: Warning - \"%c\" format modifier not supported - output may not be correct." = "%s: Warning - “%c” format modifier not supported - output may not be correct."; |
| "%s: Warning - character set option ignored." = "%s: Warning - character set option ignored."; |
| "%s: Warning - content type option ignored." = "%s: Warning - content type option ignored."; |
| "%s: Warning - form option ignored." = "%s: Warning - form option ignored."; |
| "%s: Warning - mode option ignored." = "%s: Warning - mode option ignored."; |
| "( expressions ) Group expressions" = "( expressions ) Group expressions"; |
| "- Cancel all jobs" = "- Cancel all jobs"; |
| "-# num-copies Specify the number of copies to print" = "-# num-copies Specify the number of copies to print"; |
| "--[no-]debug-logging Turn debug logging on/off" = "--[no-]debug-logging Turn debug logging on/off"; |
| "--[no-]remote-admin Turn remote administration on/off" = "--[no-]remote-admin Turn remote administration on/off"; |
| "--[no-]remote-any Allow/prevent access from the Internet" = "--[no-]remote-any Allow/prevent access from the Internet"; |
| "--[no-]share-printers Turn printer sharing on/off" = "--[no-]share-printers Turn printer sharing on/off"; |
| "--[no-]user-cancel-any Allow/prevent users to cancel any job" = "--[no-]user-cancel-any Allow/prevent users to cancel any job"; |
| "--device-id device-id Show models matching the given IEEE 1284 device ID" = "--device-id device-id Show models matching the given IEEE 1284 device ID"; |
| "--domain regex Match domain to regular expression" = "--domain regex Match domain to regular expression"; |
| "--exclude-schemes scheme-list\n Exclude the specified URI schemes" = "--exclude-schemes scheme-list\n Exclude the specified URI schemes"; |
| "--exec utility [argument ...] ;\n Execute program if true" = "--exec utility [argument …] ;\n Execute program if true"; |
| "--false Always false" = "--false Always false"; |
| "--help Show program help" = "--help Show program help"; |
| "--hold Hold new jobs" = "--hold Hold new jobs"; |
| "--host regex Match hostname to regular expression" = "--host regex Match hostname to regular expression"; |
| "--include-schemes scheme-list\n Include only the specified URI schemes" = "--include-schemes scheme-list\n Include only the specified URI schemes"; |
| "--ippserver filename Produce ippserver attribute file" = "--ippserver filename Produce ippserver attribute file"; |
| "--language locale Show models matching the given locale" = "--language locale Show models matching the given locale"; |
| "--local True if service is local" = "--local True if service is local"; |
| "--ls List attributes" = "--ls List attributes"; |
| "--make-and-model name Show models matching the given make and model name" = "--make-and-model name Show models matching the given make and model name"; |
| "--name regex Match service name to regular expression" = "--name regex Match service name to regular expression"; |
| "--no-web-forms Disable web forms for media and supplies" = "--no-web-forms Disable web forms for media and supplies"; |
| "--not expression Unary NOT of expression" = "--not expression Unary NOT of expression"; |
| "--pam-service service Use the named PAM service" = "--pam-service service Use the named PAM service"; |
| "--path regex Match resource path to regular expression" = "--path regex Match resource path to regular expression"; |
| "--port number[-number] Match port to number or range" = "--port number[-number] Match port to number or range"; |
| "--print Print URI if true" = "--print Print URI if true"; |
| "--print-name Print service name if true" = "--print-name Print service name if true"; |
| "--product name Show models matching the given PostScript product" = "--product name Show models matching the given PostScript product"; |
| "--quiet Quietly report match via exit code" = "--quiet Quietly report match via exit code"; |
| "--release Release previously held jobs" = "--release Release previously held jobs"; |
| "--remote True if service is remote" = "--remote True if service is remote"; |
| "--stop-after-include-error\n Stop tests after a failed INCLUDE" = "--stop-after-include-error\n Stop tests after a failed INCLUDE"; |
| "--timeout seconds Specify the maximum number of seconds to discover devices" = "--timeout seconds Specify the maximum number of seconds to discover devices"; |
| "--true Always true" = "--true Always true"; |
| "--txt key True if the TXT record contains the key" = "--txt key True if the TXT record contains the key"; |
| "--txt-* regex Match TXT record key to regular expression" = "--txt-* regex Match TXT record key to regular expression"; |
| "--uri regex Match URI to regular expression" = "--uri regex Match URI to regular expression"; |
| "--version Show program version" = "--version Show program version"; |
| "--version Show version" = "--version Show version"; |
| "-1" = "-1"; |
| "-10" = "-10"; |
| "-100" = "-100"; |
| "-105" = "-105"; |
| "-11" = "-11"; |
| "-110" = "-110"; |
| "-115" = "-115"; |
| "-12" = "-12"; |
| "-120" = "-120"; |
| "-13" = "-13"; |
| "-14" = "-14"; |
| "-15" = "-15"; |
| "-2" = "-2"; |
| "-2 Set 2-sided printing support (default=1-sided)" = "-2 Set 2-sided printing support (default=1-sided)"; |
| "-20" = "-20"; |
| "-25" = "-25"; |
| "-3" = "-3"; |
| "-30" = "-30"; |
| "-35" = "-35"; |
| "-4" = "-4"; |
| "-4 Connect using IPv4" = "-4 Connect using IPv4"; |
| "-40" = "-40"; |
| "-45" = "-45"; |
| "-5" = "-5"; |
| "-50" = "-50"; |
| "-55" = "-55"; |
| "-6" = "-6"; |
| "-6 Connect using IPv6" = "-6 Connect using IPv6"; |
| "-60" = "-60"; |
| "-65" = "-65"; |
| "-7" = "-7"; |
| "-70" = "-70"; |
| "-75" = "-75"; |
| "-8" = "-8"; |
| "-80" = "-80"; |
| "-85" = "-85"; |
| "-9" = "-9"; |
| "-90" = "-90"; |
| "-95" = "-95"; |
| "-A Enable authentication" = "-A Enable authentication"; |
| "-C Send requests using chunking (default)" = "-C Send requests using chunking (default)"; |
| "-D description Specify the textual description of the printer" = "-D description Specify the textual description of the printer"; |
| "-D device-uri Set the device URI for the printer" = "-D device-uri Set the device URI for the printer"; |
| "-E Enable and accept jobs on the printer (after -p)" = "-E Enable and accept jobs on the printer (after -p)"; |
| "-E Encrypt the connection to the server" = "-E Encrypt the connection to the server"; |
| "-E Test with encryption using HTTP Upgrade to TLS" = "-E Test with encryption using HTTP Upgrade to TLS"; |
| "-F Run in the foreground but detach from console." = "-F Run in the foreground but detach from console."; |
| "-F output-type/subtype Set the output format for the printer" = "-F output-type/subtype Set the output format for the printer"; |
| "-H Show the default server and port" = "-H Show the default server and port"; |
| "-H HH:MM Hold the job until the specified UTC time" = "-H HH:MM Hold the job until the specified UTC time"; |
| "-H hold Hold the job until released/resumed" = "-H hold Hold the job until released/resumed"; |
| "-H immediate Print the job as soon as possible" = "-H immediate Print the job as soon as possible"; |
| "-H restart Reprint the job" = "-H restart Reprint the job"; |
| "-H resume Resume a held job" = "-H resume Resume a held job"; |
| "-H server[:port] Connect to the named server and port" = "-H server[:port] Connect to the named server and port"; |
| "-I Ignore errors" = "-I Ignore errors"; |
| "-I {filename,filters,none,profiles}\n Ignore specific warnings" = "-I {filename,filters,none,profiles}\n Ignore specific warnings"; |
| "-K keypath Set location of server X.509 certificates and keys." = "-K keypath Set location of server X.509 certificates and keys."; |
| "-L Send requests using content-length" = "-L Send requests using content-length"; |
| "-L location Specify the textual location of the printer" = "-L location Specify the textual location of the printer"; |
| "-M manufacturer Set manufacturer name (default=Test)" = "-M manufacturer Set manufacturer name (default=Test)"; |
| "-P destination Show status for the specified destination" = "-P destination Show status for the specified destination"; |
| "-P destination Specify the destination" = "-P destination Specify the destination"; |
| "-P filename.plist Produce XML plist to a file and test report to standard output" = "-P filename.plist Produce XML plist to a file and test report to standard output"; |
| "-P filename.ppd Load printer attributes from PPD file" = "-P filename.ppd Load printer attributes from PPD file"; |
| "-P number[-number] Match port to number or range" = "-P number[-number] Match port to number or range"; |
| "-P page-list Specify a list of pages to print" = "-P page-list Specify a list of pages to print"; |
| "-R Show the ranking of jobs" = "-R Show the ranking of jobs"; |
| "-R name-default Remove the default value for the named option" = "-R name-default Remove the default value for the named option"; |
| "-R root-directory Set alternate root" = "-R root-directory Set alternate root"; |
| "-S Test with encryption using HTTPS" = "-S Test with encryption using HTTPS"; |
| "-T seconds Set the browse timeout in seconds" = "-T seconds Set the browse timeout in seconds"; |
| "-T seconds Set the receive/send timeout in seconds" = "-T seconds Set the receive/send timeout in seconds"; |
| "-T title Specify the job title" = "-T title Specify the job title"; |
| "-U username Specify the username to use for authentication" = "-U username Specify the username to use for authentication"; |
| "-U username Specify username to use for authentication" = "-U username Specify username to use for authentication"; |
| "-V version Set default IPP version" = "-V version Set default IPP version"; |
| "-W completed Show completed jobs" = "-W completed Show completed jobs"; |
| "-W not-completed Show pending jobs" = "-W not-completed Show pending jobs"; |
| "-W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}\n Issue warnings instead of errors" = "-W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}\n Issue warnings instead of errors"; |
| "-X Produce XML plist instead of plain text" = "-X Produce XML plist instead of plain text"; |
| "-a Cancel all jobs" = "-a Cancel all jobs"; |
| "-a Show jobs on all destinations" = "-a Show jobs on all destinations"; |
| "-a [destination(s)] Show the accepting state of destinations" = "-a [destination(s)] Show the accepting state of destinations"; |
| "-a filename.conf Load printer attributes from conf file" = "-a filename.conf Load printer attributes from conf file"; |
| "-c Make a copy of the print file(s)" = "-c Make a copy of the print file(s)"; |
| "-c Produce CSV output" = "-c Produce CSV output"; |
| "-c [class(es)] Show classes and their member printers" = "-c [class(es)] Show classes and their member printers"; |
| "-c class Add the named destination to a class" = "-c class Add the named destination to a class"; |
| "-c command Set print command" = "-c command Set print command"; |
| "-c cupsd.conf Set cupsd.conf file to use." = "-c cupsd.conf Set cupsd.conf file to use."; |
| "-d Show the default destination" = "-d Show the default destination"; |
| "-d destination Set default destination" = "-d destination Set default destination"; |
| "-d destination Set the named destination as the server default" = "-d destination Set the named destination as the server default"; |
| "-d destination Specify the destination" = "-d destination Specify the destination"; |
| "-d name=value Set named variable to value" = "-d name=value Set named variable to value"; |
| "-d regex Match domain to regular expression" = "-d regex Match domain to regular expression"; |
| "-d spool-directory Set spool directory" = "-d spool-directory Set spool directory"; |
| "-e Show available destinations on the network" = "-e Show available destinations on the network"; |
| "-f Run in the foreground." = "-f Run in the foreground."; |
| "-f filename Set default request filename" = "-f filename Set default request filename"; |
| "-f type/subtype[,...] Set supported file types" = "-f type/subtype[,…] Set supported file types"; |
| "-h Show this usage message." = "-h Show this usage message."; |
| "-h Validate HTTP response headers" = "-h Validate HTTP response headers"; |
| "-h regex Match hostname to regular expression" = "-h regex Match hostname to regular expression"; |
| "-h server[:port] Connect to the named server and port" = "-h server[:port] Connect to the named server and port"; |
| "-i iconfile.png Set icon file" = "-i iconfile.png Set icon file"; |
| "-i id Specify an existing job ID to modify" = "-i id Specify an existing job ID to modify"; |
| "-i ppd-file Specify a PPD file for the printer" = "-i ppd-file Specify a PPD file for the printer"; |
| "-i seconds Repeat the last file with the given time interval" = "-i seconds Repeat the last file with the given time interval"; |
| "-k Keep job spool files" = "-k Keep job spool files"; |
| "-l List attributes" = "-l List attributes"; |
| "-l Produce plain text output" = "-l Produce plain text output"; |
| "-l Run cupsd on demand." = "-l Run cupsd on demand."; |
| "-l Show supported options and values" = "-l Show supported options and values"; |
| "-l Show verbose (long) output" = "-l Show verbose (long) output"; |
| "-l location Set location of printer" = "-l location Set location of printer"; |
| "-m Send an email notification when the job completes" = "-m Send an email notification when the job completes"; |
| "-m Show models" = "-m Show models"; |
| "-m everywhere Specify the printer is compatible with IPP Everywhere" = "-m everywhere Specify the printer is compatible with IPP Everywhere"; |
| "-m model Set model name (default=Printer)" = "-m model Set model name (default=Printer)"; |
| "-m model Specify a standard model/PPD file for the printer" = "-m model Specify a standard model/PPD file for the printer"; |
| "-n count Repeat the last file the given number of times" = "-n count Repeat the last file the given number of times"; |
| "-n hostname Set hostname for printer" = "-n hostname Set hostname for printer"; |
| "-n num-copies Specify the number of copies to print" = "-n num-copies Specify the number of copies to print"; |
| "-n regex Match service name to regular expression" = "-n regex Match service name to regular expression"; |
| "-o Name=Value Specify the default value for the named PPD option " = "-o Name=Value Specify the default value for the named PPD option "; |
| "-o [destination(s)] Show jobs" = "-o [destination(s)] Show jobs"; |
| "-o cupsIPPSupplies=false\n Disable supply level reporting via IPP" = "-o cupsIPPSupplies=false\n Disable supply level reporting via IPP"; |
| "-o cupsSNMPSupplies=false\n Disable supply level reporting via SNMP" = "-o cupsSNMPSupplies=false\n Disable supply level reporting via SNMP"; |
| "-o job-k-limit=N Specify the kilobyte limit for per-user quotas" = "-o job-k-limit=N Specify the kilobyte limit for per-user quotas"; |
| "-o job-page-limit=N Specify the page limit for per-user quotas" = "-o job-page-limit=N Specify the page limit for per-user quotas"; |
| "-o job-quota-period=N Specify the per-user quota period in seconds" = "-o job-quota-period=N Specify the per-user quota period in seconds"; |
| "-o job-sheets=standard Print a banner page with the job" = "-o job-sheets=standard Print a banner page with the job"; |
| "-o media=size Specify the media size to use" = "-o media=size Specify the media size to use"; |
| "-o name-default=value Specify the default value for the named option" = "-o name-default=value Specify the default value for the named option"; |
| "-o name[=value] Set default option and value" = "-o name[=value] Set default option and value"; |
| "-o number-up=N Specify that input pages should be printed N-up (1, 2, 4, 6, 9, and 16 are supported)" = "-o number-up=N Specify that input pages should be printed N-up (1, 2, 4, 6, 9, and 16 are supported)"; |
| "-o option[=value] Specify a printer-specific option" = "-o option[=value] Specify a printer-specific option"; |
| "-o orientation-requested=N\n Specify portrait (3) or landscape (4) orientation" = "-o orientation-requested=N\n Specify portrait (3) or landscape (4) orientation"; |
| "-o print-quality=N Specify the print quality - draft (3), normal (4), or best (5)" = "-o print-quality=N Specify the print quality - draft (3), normal (4), or best (5)"; |
| "-o printer-error-policy=name\n Specify the printer error policy" = "-o printer-error-policy=name\n Specify the printer error policy"; |
| "-o printer-is-shared=true\n Share the printer" = "-o printer-is-shared=true\n Share the printer"; |
| "-o printer-op-policy=name\n Specify the printer operation policy" = "-o printer-op-policy=name\n Specify the printer operation policy"; |
| "-o sides=one-sided Specify 1-sided printing" = "-o sides=one-sided Specify 1-sided printing"; |
| "-o sides=two-sided-long-edge\n Specify 2-sided portrait printing" = "-o sides=two-sided-long-edge\n Specify 2-sided portrait printing"; |
| "-o sides=two-sided-short-edge\n Specify 2-sided landscape printing" = "-o sides=two-sided-short-edge\n Specify 2-sided landscape printing"; |
| "-p Print URI if true" = "-p Print URI if true"; |
| "-p [printer(s)] Show the processing state of destinations" = "-p [printer(s)] Show the processing state of destinations"; |
| "-p destination Specify a destination" = "-p destination Specify a destination"; |
| "-p destination Specify/add the named destination" = "-p destination Specify/add the named destination"; |
| "-p port Set port number for printer" = "-p port Set port number for printer"; |
| "-q Quietly report match via exit code" = "-q Quietly report match via exit code"; |
| "-q Run silently" = "-q Run silently"; |
| "-q Specify the job should be held for printing" = "-q Specify the job should be held for printing"; |
| "-q priority Specify the priority from low (1) to high (100)" = "-q priority Specify the priority from low (1) to high (100)"; |
| "-r Remove the file(s) after submission" = "-r Remove the file(s) after submission"; |
| "-r Show whether the CUPS server is running" = "-r Show whether the CUPS server is running"; |
| "-r True if service is remote" = "-r True if service is remote"; |
| "-r Use 'relaxed' open mode" = "-r Use ‘relaxed’ open mode"; |
| "-r class Remove the named destination from a class" = "-r class Remove the named destination from a class"; |
| "-r reason Specify a reason message that others can see" = "-r reason Specify a reason message that others can see"; |
| "-r subtype,[subtype] Set DNS-SD service subtype" = "-r subtype,[subtype] Set DNS-SD service subtype"; |
| "-s Be silent" = "-s Be silent"; |
| "-s Print service name if true" = "-s Print service name if true"; |
| "-s Show a status summary" = "-s Show a status summary"; |
| "-s cups-files.conf Set cups-files.conf file to use." = "-s cups-files.conf Set cups-files.conf file to use."; |
| "-s speed[,color-speed] Set speed in pages per minute" = "-s speed[,color-speed] Set speed in pages per minute"; |
| "-t Produce a test report" = "-t Produce a test report"; |
| "-t Show all status information" = "-t Show all status information"; |
| "-t Test the configuration file." = "-t Test the configuration file."; |
| "-t key True if the TXT record contains the key" = "-t key True if the TXT record contains the key"; |
| "-t title Specify the job title" = "-t title Specify the job title"; |
| "-u [user(s)] Show jobs queued by the current or specified users" = "-u [user(s)] Show jobs queued by the current or specified users"; |
| "-u allow:all Allow all users to print" = "-u allow:all Allow all users to print"; |
| "-u allow:list Allow the list of users or groups (@name) to print" = "-u allow:list Allow the list of users or groups (@name) to print"; |
| "-u deny:list Prevent the list of users or groups (@name) to print" = "-u deny:list Prevent the list of users or groups (@name) to print"; |
| "-u owner Specify the owner to use for jobs" = "-u owner Specify the owner to use for jobs"; |
| "-u regex Match URI to regular expression" = "-u regex Match URI to regular expression"; |
| "-v Be verbose" = "-v Be verbose"; |
| "-v Show devices" = "-v Show devices"; |
| "-v [printer(s)] Show the devices for each destination" = "-v [printer(s)] Show the devices for each destination"; |
| "-v device-uri Specify the device URI for the printer" = "-v device-uri Specify the device URI for the printer"; |
| "-vv Be very verbose" = "-vv Be very verbose"; |
| "-x Purge jobs rather than just canceling" = "-x Purge jobs rather than just canceling"; |
| "-x destination Remove default options for destination" = "-x destination Remove default options for destination"; |
| "-x destination Remove the named destination" = "-x destination Remove the named destination"; |
| "-x utility [argument ...] ;\n Execute program if true" = "-x utility [argument …] ;\n Execute program if true"; |
| "/etc/cups/lpoptions file names default destination that does not exist." = "/etc/cups/lpoptions file names default destination that does not exist."; |
| "0" = "0"; |
| "1" = "1"; |
| "1 inch/sec." = "1 inch/sec."; |
| "1.25x0.25\"" = "1.25x0.25″"; |
| "1.25x2.25\"" = "1.25x2.25″"; |
| "1.5 inch/sec." = "1.5 inch/sec."; |
| "1.50x0.25\"" = "1.50x0.25″"; |
| "1.50x0.50\"" = "1.50x0.50″"; |
| "1.50x1.00\"" = "1.50x1.00″"; |
| "1.50x2.00\"" = "1.50x2.00″"; |
| "10" = "10"; |
| "10 inches/sec." = "10 inches/sec."; |
| "10 x 11" = "10 x 11"; |
| "10 x 13" = "10 x 13"; |
| "10 x 14" = "10 x 14"; |
| "100" = "100"; |
| "100 mm/sec." = "100 mm/sec."; |
| "105" = "105"; |
| "11" = "11"; |
| "11 inches/sec." = "11 inches/sec."; |
| "110" = "110"; |
| "115" = "115"; |
| "12" = "12"; |
| "12 inches/sec." = "12 inches/sec."; |
| "12 x 11" = "12 x 11"; |
| "120" = "120"; |
| "120 mm/sec." = "120 mm/sec."; |
| "120x60dpi" = "120x60dpi"; |
| "120x72dpi" = "120x72dpi"; |
| "13" = "13"; |
| "136dpi" = "136dpi"; |
| "14" = "14"; |
| "15" = "15"; |
| "15 mm/sec." = "15 mm/sec."; |
| "15 x 11" = "15 x 11"; |
| "150 mm/sec." = "150 mm/sec."; |
| "150dpi" = "150dpi"; |
| "16" = "16"; |
| "17" = "17"; |
| "18" = "18"; |
| "180dpi" = "180dpi"; |
| "19" = "19"; |
| "2" = "2"; |
| "2 inches/sec." = "2 inches/sec."; |
| "2-Sided Printing" = "2-Sided Printing"; |
| "2.00x0.37\"" = "2.00x0.37″"; |
| "2.00x0.50\"" = "2.00x0.50″"; |
| "2.00x1.00\"" = "2.00x1.00″"; |
| "2.00x1.25\"" = "2.00x1.25″"; |
| "2.00x2.00\"" = "2.00x2.00″"; |
| "2.00x3.00\"" = "2.00x3.00″"; |
| "2.00x4.00\"" = "2.00x4.00″"; |
| "2.00x5.50\"" = "2.00x5.50″"; |
| "2.25x0.50\"" = "2.25x0.50″"; |
| "2.25x1.25\"" = "2.25x1.25″"; |
| "2.25x4.00\"" = "2.25x4.00″"; |
| "2.25x5.50\"" = "2.25x5.50″"; |
| "2.38x5.50\"" = "2.38x5.50″"; |
| "2.5 inches/sec." = "2.5 inches/sec."; |
| "2.50x1.00\"" = "2.50x1.00″"; |
| "2.50x2.00\"" = "2.50x2.00″"; |
| "2.75x1.25\"" = "2.75x1.25″"; |
| "2.9 x 1\"" = "2.9 x 1″"; |
| "20" = "20"; |
| "20 mm/sec." = "20 mm/sec."; |
| "200 mm/sec." = "200 mm/sec."; |
| "203dpi" = "203dpi"; |
| "21" = "21"; |
| "22" = "22"; |
| "23" = "23"; |
| "24" = "24"; |
| "24-Pin Series" = "24-Pin Series"; |
| "240x72dpi" = "240x72dpi"; |
| "25" = "25"; |
| "250 mm/sec." = "250 mm/sec."; |
| "26" = "26"; |
| "27" = "27"; |
| "28" = "28"; |
| "29" = "29"; |
| "3" = "3"; |
| "3 inches/sec." = "3 inches/sec."; |
| "3 x 5" = "3 x 5"; |
| "3.00x1.00\"" = "3.00x1.00″"; |
| "3.00x1.25\"" = "3.00x1.25″"; |
| "3.00x2.00\"" = "3.00x2.00″"; |
| "3.00x3.00\"" = "3.00x3.00″"; |
| "3.00x5.00\"" = "3.00x5.00″"; |
| "3.25x2.00\"" = "3.25x2.00″"; |
| "3.25x5.00\"" = "3.25x5.00″"; |
| "3.25x5.50\"" = "3.25x5.50″"; |
| "3.25x5.83\"" = "3.25x5.83″"; |
| "3.25x7.83\"" = "3.25x7.83″"; |
| "3.5 x 5" = "3.5 x 5"; |
| "3.5\" Disk" = "3.5″ Disk"; |
| "3.50x1.00\"" = "3.50x1.00″"; |
| "30" = "30"; |
| "30 mm/sec." = "30 mm/sec."; |
| "300 mm/sec." = "300 mm/sec."; |
| "300dpi" = "300dpi"; |
| "30859 Paint Can Label" = "30859 Paint Can Label"; |
| "35" = "35"; |
| "360dpi" = "360dpi"; |
| "360x180dpi" = "360x180dpi"; |
| "4" = "4"; |
| "4 inches/sec." = "4 inches/sec."; |
| "4.00x1.00\"" = "4.00x1.00″"; |
| "4.00x13.00\"" = "4.00x13.00″"; |
| "4.00x2.00\"" = "4.00x2.00″"; |
| "4.00x2.50\"" = "4.00x2.50″"; |
| "4.00x3.00\"" = "4.00x3.00″"; |
| "4.00x4.00\"" = "4.00x4.00″"; |
| "4.00x5.00\"" = "4.00x5.00″"; |
| "4.00x6.00\"" = "4.00x6.00″"; |
| "4.00x6.50\"" = "4.00x6.50″"; |
| "40" = "40"; |
| "40 mm/sec." = "40 mm/sec."; |
| "45" = "45"; |
| "5" = "5"; |
| "5 inches/sec." = "5 inches/sec."; |
| "5 x 7" = "5 x 7"; |
| "50" = "50"; |
| "55" = "55"; |
| "6" = "6"; |
| "6 inches/sec." = "6 inches/sec."; |
| "6.00x1.00\"" = "6.00x1.00″"; |
| "6.00x2.00\"" = "6.00x2.00″"; |
| "6.00x3.00\"" = "6.00x3.00″"; |
| "6.00x4.00\"" = "6.00x4.00″"; |
| "6.00x5.00\"" = "6.00x5.00″"; |
| "6.00x6.00\"" = "6.00x6.00″"; |
| "6.00x6.50\"" = "6.00x6.50″"; |
| "60" = "60"; |
| "60 mm/sec." = "60 mm/sec."; |
| "600dpi" = "600dpi"; |
| "60dpi" = "60dpi"; |
| "60x72dpi" = "60x72dpi"; |
| "65" = "65"; |
| "7" = "7"; |
| "7 inches/sec." = "7 inches/sec."; |
| "7 x 9" = "7 x 9"; |
| "70" = "70"; |
| "75" = "75"; |
| "8" = "8"; |
| "8 inches/sec." = "8 inches/sec."; |
| "8 x 10" = "8 x 10"; |
| "8.00x1.00\"" = "8.00x1.00″"; |
| "8.00x2.00\"" = "8.00x2.00″"; |
| "8.00x3.00\"" = "8.00x3.00″"; |
| "8.00x4.00\"" = "8.00x4.00″"; |
| "8.00x5.00\"" = "8.00x5.00″"; |
| "8.00x6.00\"" = "8.00x6.00″"; |
| "8.00x6.50\"" = "8.00x6.50″"; |
| "80" = "80"; |
| "80 mm/sec." = "80 mm/sec."; |
| "85" = "85"; |
| "9" = "9"; |
| "9 inches/sec." = "9 inches/sec."; |
| "9 x 11" = "9 x 11"; |
| "9 x 12" = "9 x 12"; |
| "9-Pin Series" = "9-Pin Series"; |
| "90" = "90"; |
| "95" = "95"; |
| "?Invalid help command unknown." = "?Invalid help command unknown."; |
| "A class named \"%s\" already exists." = "A class named “%s” already exists."; |
| "A printer named \"%s\" already exists." = "A printer named “%s” already exists."; |
| "A0" = "A0"; |
| "A0 Long Edge" = "A0 Long Edge"; |
| "A1" = "A1"; |
| "A1 Long Edge" = "A1 Long Edge"; |
| "A10" = "A10"; |
| "A2" = "A2"; |
| "A2 Long Edge" = "A2 Long Edge"; |
| "A3" = "A3"; |
| "A3 Long Edge" = "A3 Long Edge"; |
| "A3 Oversize" = "A3 Oversize"; |
| "A3 Oversize Long Edge" = "A3 Oversize Long Edge"; |
| "A4" = "A4"; |
| "A4 Long Edge" = "A4 Long Edge"; |
| "A4 Oversize" = "A4 Oversize"; |
| "A4 Small" = "A4 Small"; |
| "A5" = "A5"; |
| "A5 Long Edge" = "A5 Long Edge"; |
| "A5 Oversize" = "A5 Oversize"; |
| "A6" = "A6"; |
| "A6 Long Edge" = "A6 Long Edge"; |
| "A7" = "A7"; |
| "A8" = "A8"; |
| "A9" = "A9"; |
| "ANSI A" = "ANSI A"; |
| "ANSI B" = "ANSI B"; |
| "ANSI C" = "ANSI C"; |
| "ANSI D" = "ANSI D"; |
| "ANSI E" = "ANSI E"; |
| "ARCH C" = "ARCH C"; |
| "ARCH C Long Edge" = "ARCH C Long Edge"; |
| "ARCH D" = "ARCH D"; |
| "ARCH D Long Edge" = "ARCH D Long Edge"; |
| "ARCH E" = "ARCH E"; |
| "ARCH E Long Edge" = "ARCH E Long Edge"; |
| "Accept Jobs" = "Accept Jobs"; |
| "Accepted" = "Accepted"; |
| "Add Class" = "Add Class"; |
| "Add Printer" = "Add Printer"; |
| "Address" = "Address"; |
| "Administration" = "Administration"; |
| "Always" = "Always"; |
| "AppSocket/HP JetDirect" = "AppSocket/HP JetDirect"; |
| "Applicator" = "Applicator"; |
| "Attempt to set %s printer-state to bad value %d." = "Attempt to set %s printer-state to bad value %d."; |
| "Attribute \"%s\" is in the wrong group." = "Attribute “%s” is in the wrong group."; |
| "Attribute \"%s\" is the wrong value type." = "Attribute “%s” is the wrong value type."; |
| "Attribute groups are out of order (%x < %x)." = "Attribute groups are out of order (%x < %x)."; |
| "B0" = "B0"; |
| "B1" = "B1"; |
| "B10" = "B10"; |
| "B2" = "B2"; |
| "B3" = "B3"; |
| "B4" = "B4"; |
| "B5" = "B5"; |
| "B5 Oversize" = "B5 Oversize"; |
| "B6" = "B6"; |
| "B7" = "B7"; |
| "B8" = "B8"; |
| "B9" = "B9"; |
| "Bad \"printer-id\" value %d." = "Bad “printer-id” value %d."; |
| "Bad '%s' value." = "Bad ‘%s’ value."; |
| "Bad 'document-format' value \"%s\"." = "Bad ‘document-format’ value “%s”."; |
| "Bad CloseUI/JCLCloseUI" = "Bad CloseUI/JCLCloseUI"; |
| "Bad NULL dests pointer" = "Bad NULL dests pointer"; |
| "Bad OpenGroup" = "Bad OpenGroup"; |
| "Bad OpenUI/JCLOpenUI" = "Bad OpenUI/JCLOpenUI"; |
| "Bad OrderDependency" = "Bad OrderDependency"; |
| "Bad PPD cache file." = "Bad PPD cache file."; |
| "Bad PPD file." = "Bad PPD file."; |
| "Bad Request" = "Bad Request"; |
| "Bad SNMP version number" = "Bad SNMP version number"; |
| "Bad UIConstraints" = "Bad UIConstraints"; |
| "Bad URI." = "Bad URI."; |
| "Bad arguments to function" = "Bad arguments to function"; |
| "Bad copies value %d." = "Bad copies value %d."; |
| "Bad custom parameter" = "Bad custom parameter"; |
| "Bad device-uri \"%s\"." = "Bad device-uri “%s”."; |
| "Bad device-uri scheme \"%s\"." = "Bad device-uri scheme “%s”."; |
| "Bad document-format \"%s\"." = "Bad document-format “%s”."; |
| "Bad document-format-default \"%s\"." = "Bad document-format-default “%s”."; |
| "Bad filename buffer" = "Bad filename buffer"; |
| "Bad hostname/address in URI" = "Bad hostname/address in URI"; |
| "Bad job-name value: %s" = "Bad job-name value: %s"; |
| "Bad job-name value: Wrong type or count." = "Bad job-name value: Wrong type or count."; |
| "Bad job-priority value." = "Bad job-priority value."; |
| "Bad job-sheets value \"%s\"." = "Bad job-sheets value “%s”."; |
| "Bad job-sheets value type." = "Bad job-sheets value type."; |
| "Bad job-state value." = "Bad job-state value."; |
| "Bad job-uri \"%s\"." = "Bad job-uri “%s”."; |
| "Bad notify-pull-method \"%s\"." = "Bad notify-pull-method “%s”."; |
| "Bad notify-recipient-uri \"%s\"." = "Bad notify-recipient-uri “%s”."; |
| "Bad notify-user-data \"%s\"." = "Bad notify-user-data “%s”."; |
| "Bad number-up value %d." = "Bad number-up value %d."; |
| "Bad page-ranges values %d-%d." = "Bad page-ranges values %d-%d."; |
| "Bad port number in URI" = "Bad port number in URI"; |
| "Bad port-monitor \"%s\"." = "Bad port-monitor “%s”."; |
| "Bad printer-state value %d." = "Bad printer-state value %d."; |
| "Bad printer-uri." = "Bad printer-uri."; |
| "Bad request ID %d." = "Bad request ID %d."; |
| "Bad request version number %d.%d." = "Bad request version number %d.%d."; |
| "Bad resource in URI" = "Bad resource in URI"; |
| "Bad scheme in URI" = "Bad scheme in URI"; |
| "Bad username in URI" = "Bad username in URI"; |
| "Bad value string" = "Bad value string"; |
| "Bad/empty URI" = "Bad/empty URI"; |
| "Banners" = "Banners"; |
| "Bond Paper" = "Bond Paper"; |
| "Booklet" = "Booklet"; |
| "Boolean expected for waiteof option \"%s\"." = "Boolean expected for waiteof option “%s”."; |
| "Buffer overflow detected, aborting." = "Buffer overflow detected, aborting."; |
| "CMYK" = "CMYK"; |
| "CPCL Label Printer" = "CPCL Label Printer"; |
| "Cancel Jobs" = "Cancel Jobs"; |
| "Canceling print job." = "Canceling print job."; |
| "Cannot change printer-is-shared for remote queues." = "Cannot change printer-is-shared for remote queues."; |
| "Cannot share a remote Kerberized printer." = "Cannot share a remote Kerberized printer."; |
| "Cassette" = "Cassette"; |
| "Change Settings" = "Change Settings"; |
| "Character set \"%s\" not supported." = "Character set “%s” not supported."; |
| "Classes" = "Classes"; |
| "Clean Print Heads" = "Clean Print Heads"; |
| "Close-Job doesn't support the job-uri attribute." = "Close-Job doesn’t support the job-uri attribute."; |
| "Color" = "Color"; |
| "Color Mode" = "Color Mode"; |
| "Commands may be abbreviated. Commands are:\n\nexit help quit status ?" = "Commands may be abbreviated. Commands are:\n\nexit help quit status ?"; |
| "Community name uses indefinite length" = "Community name uses indefinite length"; |
| "Connected to printer." = "Connected to printer."; |
| "Connecting to printer." = "Connecting to printer."; |
| "Continue" = "Continue"; |
| "Continuous" = "Continuous"; |
| "Control file sent successfully." = "Control file sent successfully."; |
| "Copying print data." = "Copying print data."; |
| "Created" = "Created"; |
| "Credentials do not validate against site CA certificate." = "Credentials do not validate against site CA certificate."; |
| "Credentials have expired." = "Credentials have expired."; |
| "Custom" = "Custom"; |
| "CustominCutInterval" = "CustominCutInterval"; |
| "CustominTearInterval" = "CustominTearInterval"; |
| "Cut" = "Cut"; |
| "Cutter" = "Cutter"; |
| "DYMO" = "DYMO"; |
| "Dark" = "Dark"; |
| "Darkness" = "Darkness"; |
| "Data file sent successfully." = "Data file sent successfully."; |
| "Deep Color" = "Deep Color"; |
| "Deep Gray" = "Deep Gray"; |
| "Delete Class" = "Delete Class"; |
| "Delete Printer" = "Delete Printer"; |
| "DeskJet Series" = "DeskJet Series"; |
| "Destination \"%s\" is not accepting jobs." = "Destination “%s” is not accepting jobs."; |
| "Device CMYK" = "Device CMYK"; |
| "Device Gray" = "Device Gray"; |
| "Device RGB" = "Device RGB"; |
| "Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s" = "Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s"; |
| "Direct Thermal Media" = "Direct Thermal Media"; |
| "Directory \"%s\" contains a relative path." = "Directory “%s” contains a relative path."; |
| "Directory \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "Directory “%s” has insecure permissions (0%o/uid=%d/gid=%d)."; |
| "Directory \"%s\" is a file." = "Directory “%s” is a file."; |
| "Directory \"%s\" not available: %s" = "Directory “%s” not available: %s"; |
| "Directory \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "Directory “%s” permissions OK (0%o/uid=%d/gid=%d)."; |
| "Disabled" = "Disabled"; |
| "Document #%d does not exist in job #%d." = "Document #%d does not exist in job #%d."; |
| "Draft" = "Draft"; |
| "Duplexer" = "Duplexer"; |
| "EPL1 Label Printer" = "EPL1 Label Printer"; |
| "EPL2 Label Printer" = "EPL2 Label Printer"; |
| "Edit Configuration File" = "Edit Configuration File"; |
| "Encryption is not supported." = "Encryption is not supported."; |
| // TRANSLATORS: Banner/cover sheet after the print job. |
| "Ending Banner" = "Ending Banner"; |
| "English" = "English"; |
| "Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket." = "Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket."; |
| "Envelope #10" = "Envelope #10"; |
| "Envelope #11" = "Envelope #11"; |
| "Envelope #12" = "Envelope #12"; |
| "Envelope #14" = "Envelope #14"; |
| "Envelope #9" = "Envelope #9"; |
| "Envelope B4" = "Envelope B4"; |
| "Envelope B5" = "Envelope B5"; |
| "Envelope B6" = "Envelope B6"; |
| "Envelope C0" = "Envelope C0"; |
| "Envelope C1" = "Envelope C1"; |
| "Envelope C2" = "Envelope C2"; |
| "Envelope C3" = "Envelope C3"; |
| "Envelope C4" = "Envelope C4"; |
| "Envelope C5" = "Envelope C5"; |
| "Envelope C6" = "Envelope C6"; |
| "Envelope C65" = "Envelope C65"; |
| "Envelope C7" = "Envelope C7"; |
| "Envelope Choukei 3" = "Envelope Choukei 3"; |
| "Envelope Choukei 3 Long Edge" = "Envelope Choukei 3 Long Edge"; |
| "Envelope Choukei 4" = "Envelope Choukei 4"; |
| "Envelope Choukei 4 Long Edge" = "Envelope Choukei 4 Long Edge"; |
| "Envelope DL" = "Envelope DL"; |
| "Envelope Feed" = "Envelope Feed"; |
| "Envelope Invite" = "Envelope Invite"; |
| "Envelope Italian" = "Envelope Italian"; |
| "Envelope Kaku2" = "Envelope Kaku2"; |
| "Envelope Kaku2 Long Edge" = "Envelope Kaku2 Long Edge"; |
| "Envelope Kaku3" = "Envelope Kaku3"; |
| "Envelope Kaku3 Long Edge" = "Envelope Kaku3 Long Edge"; |
| "Envelope Monarch" = "Envelope Monarch"; |
| "Envelope PRC1" = "Envelope PRC1"; |
| "Envelope PRC1 Long Edge" = "Envelope PRC1 Long Edge"; |
| "Envelope PRC10" = "Envelope PRC10"; |
| "Envelope PRC10 Long Edge" = "Envelope PRC10 Long Edge"; |
| "Envelope PRC2" = "Envelope PRC2"; |
| "Envelope PRC2 Long Edge" = "Envelope PRC2 Long Edge"; |
| "Envelope PRC3" = "Envelope PRC3"; |
| "Envelope PRC3 Long Edge" = "Envelope PRC3 Long Edge"; |
| "Envelope PRC4" = "Envelope PRC4"; |
| "Envelope PRC4 Long Edge" = "Envelope PRC4 Long Edge"; |
| "Envelope PRC5 Long Edge" = "Envelope PRC5 Long Edge"; |
| "Envelope PRC5PRC5" = "Envelope PRC5PRC5"; |
| "Envelope PRC6" = "Envelope PRC6"; |
| "Envelope PRC6 Long Edge" = "Envelope PRC6 Long Edge"; |
| "Envelope PRC7" = "Envelope PRC7"; |
| "Envelope PRC7 Long Edge" = "Envelope PRC7 Long Edge"; |
| "Envelope PRC8" = "Envelope PRC8"; |
| "Envelope PRC8 Long Edge" = "Envelope PRC8 Long Edge"; |
| "Envelope PRC9" = "Envelope PRC9"; |
| "Envelope PRC9 Long Edge" = "Envelope PRC9 Long Edge"; |
| "Envelope Personal" = "Envelope Personal"; |
| "Envelope You4" = "Envelope You4"; |
| "Envelope You4 Long Edge" = "Envelope You4 Long Edge"; |
| "Environment Variables:" = "Environment Variables:"; |
| "Epson" = "Epson"; |
| "Error Policy" = "Error Policy"; |
| "Error reading raster data." = "Error reading raster data."; |
| "Error sending raster data." = "Error sending raster data."; |
| "Error: need hostname after \"-h\" option." = "Error: need hostname after “-h” option."; |
| "European Fanfold" = "European Fanfold"; |
| "European Fanfold Legal" = "European Fanfold Legal"; |
| "Every 10 Labels" = "Every 10 Labels"; |
| "Every 2 Labels" = "Every 2 Labels"; |
| "Every 3 Labels" = "Every 3 Labels"; |
| "Every 4 Labels" = "Every 4 Labels"; |
| "Every 5 Labels" = "Every 5 Labels"; |
| "Every 6 Labels" = "Every 6 Labels"; |
| "Every 7 Labels" = "Every 7 Labels"; |
| "Every 8 Labels" = "Every 8 Labels"; |
| "Every 9 Labels" = "Every 9 Labels"; |
| "Every Label" = "Every Label"; |
| "Executive" = "Executive"; |
| "Expectation Failed" = "Expectation Failed"; |
| "Expressions:" = "Expressions:"; |
| "Fast Grayscale" = "Fast Grayscale"; |
| "File \"%s\" contains a relative path." = "File “%s” contains a relative path."; |
| "File \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "File “%s” has insecure permissions (0%o/uid=%d/gid=%d)."; |
| "File \"%s\" is a directory." = "File “%s” is a directory."; |
| "File \"%s\" not available: %s" = "File “%s” not available: %s"; |
| "File \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "File “%s” permissions OK (0%o/uid=%d/gid=%d)."; |
| "File Folder" = "File Folder"; |
| "File device URIs have been disabled. To enable, see the FileDevice directive in \"%s/cups-files.conf\"." = "File device URIs have been disabled. To enable, see the FileDevice directive in “%s/cups-files.conf”."; |
| "Finished page %d." = "Finished page %d."; |
| "Finishing Preset" = "Finishing Preset"; |
| "Fold" = "Fold"; |
| "Folio" = "Folio"; |
| "Forbidden" = "Forbidden"; |
| "Found" = "Found"; |
| "General" = "General"; |
| "Generic" = "Generic"; |
| "Get-Response-PDU uses indefinite length" = "Get-Response-PDU uses indefinite length"; |
| "Glossy Paper" = "Glossy Paper"; |
| "Got a printer-uri attribute but no job-id." = "Got a printer-uri attribute but no job-id."; |
| "Grayscale" = "Grayscale"; |
| "HP" = "HP"; |
| "Hanging Folder" = "Hanging Folder"; |
| "Hash buffer too small." = "Hash buffer too small."; |
| "Help file not in index." = "Help file not in index."; |
| "High" = "High"; |
| "IPP 1setOf attribute with incompatible value tags." = "IPP 1setOf attribute with incompatible value tags."; |
| "IPP attribute has no name." = "IPP attribute has no name."; |
| "IPP attribute is not a member of the message." = "IPP attribute is not a member of the message."; |
| "IPP begCollection value not 0 bytes." = "IPP begCollection value not 0 bytes."; |
| "IPP boolean value not 1 byte." = "IPP boolean value not 1 byte."; |
| "IPP date value not 11 bytes." = "IPP date value not 11 bytes."; |
| "IPP endCollection value not 0 bytes." = "IPP endCollection value not 0 bytes."; |
| "IPP enum value not 4 bytes." = "IPP enum value not 4 bytes."; |
| "IPP extension tag larger than 0x7FFFFFFF." = "IPP extension tag larger than 0x7FFFFFFF."; |
| "IPP integer value not 4 bytes." = "IPP integer value not 4 bytes."; |
| "IPP language length overflows value." = "IPP language length overflows value."; |
| "IPP language length too large." = "IPP language length too large."; |
| "IPP member name is not empty." = "IPP member name is not empty."; |
| "IPP memberName value is empty." = "IPP memberName value is empty."; |
| "IPP memberName with no attribute." = "IPP memberName with no attribute."; |
| "IPP name larger than 32767 bytes." = "IPP name larger than 32767 bytes."; |
| "IPP nameWithLanguage value less than minimum 4 bytes." = "IPP nameWithLanguage value less than minimum 4 bytes."; |
| "IPP octetString length too large." = "IPP octetString length too large."; |
| "IPP rangeOfInteger value not 8 bytes." = "IPP rangeOfInteger value not 8 bytes."; |
| "IPP resolution value not 9 bytes." = "IPP resolution value not 9 bytes."; |
| "IPP string length overflows value." = "IPP string length overflows value."; |
| "IPP textWithLanguage value less than minimum 4 bytes." = "IPP textWithLanguage value less than minimum 4 bytes."; |
| "IPP value larger than 32767 bytes." = "IPP value larger than 32767 bytes."; |
| "IPPFIND_SERVICE_DOMAIN Domain name" = "IPPFIND_SERVICE_DOMAIN Domain name"; |
| "IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name" = "IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name"; |
| "IPPFIND_SERVICE_NAME Service instance name" = "IPPFIND_SERVICE_NAME Service instance name"; |
| "IPPFIND_SERVICE_PORT Port number" = "IPPFIND_SERVICE_PORT Port number"; |
| "IPPFIND_SERVICE_REGTYPE DNS-SD registration type" = "IPPFIND_SERVICE_REGTYPE DNS-SD registration type"; |
| "IPPFIND_SERVICE_SCHEME URI scheme" = "IPPFIND_SERVICE_SCHEME URI scheme"; |
| "IPPFIND_SERVICE_URI URI" = "IPPFIND_SERVICE_URI URI"; |
| "IPPFIND_TXT_* Value of TXT record key" = "IPPFIND_TXT_* Value of TXT record key"; |
| "ISOLatin1" = "ISOLatin1"; |
| "Illegal control character" = "Illegal control character"; |
| "Illegal main keyword string" = "Illegal main keyword string"; |
| "Illegal option keyword string" = "Illegal option keyword string"; |
| "Illegal translation string" = "Illegal translation string"; |
| "Illegal whitespace character" = "Illegal whitespace character"; |
| "Installable Options" = "Installable Options"; |
| "Installed" = "Installed"; |
| "IntelliBar Label Printer" = "IntelliBar Label Printer"; |
| "Intellitech" = "Intellitech"; |
| "Internal Server Error" = "Internal Server Error"; |
| "Internal error" = "Internal error"; |
| "Internet Postage 2-Part" = "Internet Postage 2-Part"; |
| "Internet Postage 3-Part" = "Internet Postage 3-Part"; |
| "Internet Printing Protocol" = "Internet Printing Protocol"; |
| "Invalid group tag." = "Invalid group tag."; |
| "Invalid media name arguments." = "Invalid media name arguments."; |
| "Invalid media size." = "Invalid media size."; |
| "Invalid named IPP attribute in collection." = "Invalid named IPP attribute in collection."; |
| "Invalid ppd-name value." = "Invalid ppd-name value."; |
| "Invalid printer command \"%s\"." = "Invalid printer command “%s”."; |
| "JCL" = "JCL"; |
| "JIS B0" = "JIS B0"; |
| "JIS B1" = "JIS B1"; |
| "JIS B10" = "JIS B10"; |
| "JIS B2" = "JIS B2"; |
| "JIS B3" = "JIS B3"; |
| "JIS B4" = "JIS B4"; |
| "JIS B4 Long Edge" = "JIS B4 Long Edge"; |
| "JIS B5" = "JIS B5"; |
| "JIS B5 Long Edge" = "JIS B5 Long Edge"; |
| "JIS B6" = "JIS B6"; |
| "JIS B6 Long Edge" = "JIS B6 Long Edge"; |
| "JIS B7" = "JIS B7"; |
| "JIS B8" = "JIS B8"; |
| "JIS B9" = "JIS B9"; |
| "Job #%d cannot be restarted - no files." = "Job #%d cannot be restarted - no files."; |
| "Job #%d does not exist." = "Job #%d does not exist."; |
| "Job #%d is already aborted - can't cancel." = "Job #%d is already aborted - can’t cancel."; |
| "Job #%d is already canceled - can't cancel." = "Job #%d is already canceled - can’t cancel."; |
| "Job #%d is already completed - can't cancel." = "Job #%d is already completed - can’t cancel."; |
| "Job #%d is finished and cannot be altered." = "Job #%d is finished and cannot be altered."; |
| "Job #%d is not complete." = "Job #%d is not complete."; |
| "Job #%d is not held for authentication." = "Job #%d is not held for authentication."; |
| "Job #%d is not held." = "Job #%d is not held."; |
| "Job Completed" = "Job Completed"; |
| "Job Created" = "Job Created"; |
| "Job Options Changed" = "Job Options Changed"; |
| "Job Stopped" = "Job Stopped"; |
| "Job is completed and cannot be changed." = "Job is completed and cannot be changed."; |
| "Job operation failed" = "Job operation failed"; |
| "Job state cannot be changed." = "Job state cannot be changed."; |
| "Job subscriptions cannot be renewed." = "Job subscriptions cannot be renewed."; |
| "Jobs" = "Jobs"; |
| "LPD/LPR Host or Printer" = "LPD/LPR Host or Printer"; |
| "LPDEST environment variable names default destination that does not exist." = "LPDEST environment variable names default destination that does not exist."; |
| "Label Printer" = "Label Printer"; |
| "Label Top" = "Label Top"; |
| "Language \"%s\" not supported." = "Language “%s” not supported."; |
| "Large Address" = "Large Address"; |
| "LaserJet Series PCL 4/5" = "LaserJet Series PCL 4/5"; |
| "Letter Oversize" = "Letter Oversize"; |
| "Letter Oversize Long Edge" = "Letter Oversize Long Edge"; |
| "Light" = "Light"; |
| "Line longer than the maximum allowed (255 characters)" = "Line longer than the maximum allowed (255 characters)"; |
| "List Available Printers" = "List Available Printers"; |
| "Listening on port %d." = "Listening on port %d."; |
| "Local printer created." = "Local printer created."; |
| "Long-Edge (Portrait)" = "Long-Edge (Portrait)"; |
| "Looking for printer." = "Looking for printer."; |
| "Main Roll" = "Main Roll"; |
| "Manual Feed" = "Manual Feed"; |
| "Media Size" = "Media Size"; |
| "Media Source" = "Media Source"; |
| "Media Tracking" = "Media Tracking"; |
| "Media Type" = "Media Type"; |
| "Medium" = "Medium"; |
| "Memory allocation error" = "Memory allocation error"; |
| "Missing CloseGroup" = "Missing CloseGroup"; |
| "Missing CloseUI/JCLCloseUI" = "Missing CloseUI/JCLCloseUI"; |
| "Missing PPD-Adobe-4.x header" = "Missing PPD-Adobe-4.x header"; |
| "Missing asterisk in column 1" = "Missing asterisk in column 1"; |
| "Missing document-number attribute." = "Missing document-number attribute."; |
| "Missing form variable" = "Missing form variable"; |
| "Missing last-document attribute in request." = "Missing last-document attribute in request."; |
| "Missing media or media-col." = "Missing media or media-col."; |
| "Missing media-size in media-col." = "Missing media-size in media-col."; |
| "Missing notify-subscription-ids attribute." = "Missing notify-subscription-ids attribute."; |
| "Missing option keyword" = "Missing option keyword"; |
| "Missing requesting-user-name attribute." = "Missing requesting-user-name attribute."; |
| "Missing required attribute \"%s\"." = "Missing required attribute “%s”."; |
| "Missing required attributes." = "Missing required attributes."; |
| "Missing resource in URI" = "Missing resource in URI"; |
| "Missing scheme in URI" = "Missing scheme in URI"; |
| "Missing value string" = "Missing value string"; |
| "Missing x-dimension in media-size." = "Missing x-dimension in media-size."; |
| "Missing y-dimension in media-size." = "Missing y-dimension in media-size."; |
| "Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s" = "Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s"; |
| "Modifiers:" = "Modifiers:"; |
| "Modify Class" = "Modify Class"; |
| "Modify Printer" = "Modify Printer"; |
| "Move All Jobs" = "Move All Jobs"; |
| "Move Job" = "Move Job"; |
| "Moved Permanently" = "Moved Permanently"; |
| "NULL PPD file pointer" = "NULL PPD file pointer"; |
| "Name OID uses indefinite length" = "Name OID uses indefinite length"; |
| "Nested classes are not allowed." = "Nested classes are not allowed."; |
| "Never" = "Never"; |
| "New credentials are not valid for name." = "New credentials are not valid for name."; |
| "New credentials are older than stored credentials." = "New credentials are older than stored credentials."; |
| "No" = "No"; |
| "No Content" = "No Content"; |
| "No IPP attributes." = "No IPP attributes."; |
| "No PPD name" = "No PPD name"; |
| "No VarBind SEQUENCE" = "No VarBind SEQUENCE"; |
| "No active connection" = "No active connection"; |
| "No active connection." = "No active connection."; |
| "No active jobs on %s." = "No active jobs on %s."; |
| "No attributes in request." = "No attributes in request."; |
| "No authentication information provided." = "No authentication information provided."; |
| "No common name specified." = "No common name specified."; |
| "No community name" = "No community name"; |
| "No default destination." = "No default destination."; |
| "No default printer." = "No default printer."; |
| "No destinations added." = "No destinations added."; |
| "No device URI found in argv[0] or in DEVICE_URI environment variable." = "No device URI found in argv[0] or in DEVICE_URI environment variable."; |
| "No error-index" = "No error-index"; |
| "No error-status" = "No error-status"; |
| "No file in print request." = "No file in print request."; |
| "No modification time" = "No modification time"; |
| "No name OID" = "No name OID"; |
| "No pages were found." = "No pages were found."; |
| "No printer name" = "No printer name"; |
| "No printer-uri found" = "No printer-uri found"; |
| "No printer-uri found for class" = "No printer-uri found for class"; |
| "No printer-uri in request." = "No printer-uri in request."; |
| "No request URI." = "No request URI."; |
| "No request protocol version." = "No request protocol version."; |
| "No request sent." = "No request sent."; |
| "No request-id" = "No request-id"; |
| "No stored credentials, not valid for name." = "No stored credentials, not valid for name."; |
| "No subscription attributes in request." = "No subscription attributes in request."; |
| "No subscriptions found." = "No subscriptions found."; |
| "No variable-bindings SEQUENCE" = "No variable-bindings SEQUENCE"; |
| "No version number" = "No version number"; |
| "Non-continuous (Mark sensing)" = "Non-continuous (Mark sensing)"; |
| "Non-continuous (Web sensing)" = "Non-continuous (Web sensing)"; |
| "None" = "None"; |
| "Normal" = "Normal"; |
| "Not Found" = "Not Found"; |
| "Not Implemented" = "Not Implemented"; |
| "Not Installed" = "Not Installed"; |
| "Not Modified" = "Not Modified"; |
| "Not Supported" = "Not Supported"; |
| "Not allowed to print." = "Not allowed to print."; |
| "Note" = "Note"; |
| "OK" = "OK"; |
| "Off (1-Sided)" = "Off (1-Sided)"; |
| "Oki" = "Oki"; |
| "Online Help" = "Online Help"; |
| "Only local users can create a local printer." = "Only local users can create a local printer."; |
| "Open of %s failed: %s" = "Open of %s failed: %s"; |
| "OpenGroup without a CloseGroup first" = "OpenGroup without a CloseGroup first"; |
| "OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first" = "OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first"; |
| "Operation Policy" = "Operation Policy"; |
| "Option \"%s\" cannot be included via %%%%IncludeFeature." = "Option “%s” cannot be included via %%%%IncludeFeature."; |
| "Options Installed" = "Options Installed"; |
| "Options:" = "Options:"; |
| "Other Media" = "Other Media"; |
| "Other Tray" = "Other Tray"; |
| "Out of date PPD cache file." = "Out of date PPD cache file."; |
| "Out of memory." = "Out of memory."; |
| "Output Mode" = "Output Mode"; |
| "PCL Laser Printer" = "PCL Laser Printer"; |
| "PRC16K" = "PRC16K"; |
| "PRC16K Long Edge" = "PRC16K Long Edge"; |
| "PRC32K" = "PRC32K"; |
| "PRC32K Long Edge" = "PRC32K Long Edge"; |
| "PRC32K Oversize" = "PRC32K Oversize"; |
| "PRC32K Oversize Long Edge" = "PRC32K Oversize Long Edge"; |
| "PRINTER environment variable names default destination that does not exist." = "PRINTER environment variable names default destination that does not exist."; |
| "Packet does not contain a Get-Response-PDU" = "Packet does not contain a Get-Response-PDU"; |
| "Packet does not start with SEQUENCE" = "Packet does not start with SEQUENCE"; |
| "ParamCustominCutInterval" = "ParamCustominCutInterval"; |
| "ParamCustominTearInterval" = "ParamCustominTearInterval"; |
| "Password for %s on %s? " = "Password for %s on %s? "; |
| "Pause Class" = "Pause Class"; |
| "Pause Printer" = "Pause Printer"; |
| "Peel-Off" = "Peel-Off"; |
| "Photo" = "Photo"; |
| "Photo Labels" = "Photo Labels"; |
| "Plain Paper" = "Plain Paper"; |
| "Policies" = "Policies"; |
| "Port Monitor" = "Port Monitor"; |
| "PostScript Printer" = "PostScript Printer"; |
| "Postcard" = "Postcard"; |
| "Postcard Double" = "Postcard Double"; |
| "Postcard Double Long Edge" = "Postcard Double Long Edge"; |
| "Postcard Long Edge" = "Postcard Long Edge"; |
| "Preparing to print." = "Preparing to print."; |
| "Print Density" = "Print Density"; |
| "Print Job:" = "Print Job:"; |
| "Print Mode" = "Print Mode"; |
| "Print Quality" = "Print Quality"; |
| "Print Rate" = "Print Rate"; |
| "Print Self-Test Page" = "Print Self-Test Page"; |
| "Print Speed" = "Print Speed"; |
| "Print Test Page" = "Print Test Page"; |
| "Print and Cut" = "Print and Cut"; |
| "Print and Tear" = "Print and Tear"; |
| "Print file sent." = "Print file sent."; |
| "Print job canceled at printer." = "Print job canceled at printer."; |
| "Print job too large." = "Print job too large."; |
| "Print job was not accepted." = "Print job was not accepted."; |
| "Printer \"%s\" already exists." = "Printer “%s” already exists."; |
| "Printer Added" = "Printer Added"; |
| "Printer Default" = "Printer Default"; |
| "Printer Deleted" = "Printer Deleted"; |
| "Printer Modified" = "Printer Modified"; |
| "Printer Paused" = "Printer Paused"; |
| "Printer Settings" = "Printer Settings"; |
| "Printer cannot print supplied content." = "Printer cannot print supplied content."; |
| "Printer cannot print with supplied options." = "Printer cannot print with supplied options."; |
| "Printer does not support required IPP attributes or document formats." = "Printer does not support required IPP attributes or document formats."; |
| "Printer:" = "Printer:"; |
| "Printers" = "Printers"; |
| "Printing page %d, %u%% complete." = "Printing page %d, %u%% complete."; |
| "Punch" = "Punch"; |
| "Quarto" = "Quarto"; |
| "Quota limit reached." = "Quota limit reached."; |
| "Rank Owner Job File(s) Total Size" = "Rank Owner Job File(s) Total Size"; |
| "Reject Jobs" = "Reject Jobs"; |
| "Remote host did not accept control file (%d)." = "Remote host did not accept control file (%d)."; |
| "Remote host did not accept data file (%d)." = "Remote host did not accept data file (%d)."; |
| "Reprint After Error" = "Reprint After Error"; |
| "Request Entity Too Large" = "Request Entity Too Large"; |
| "Resolution" = "Resolution"; |
| "Resume Class" = "Resume Class"; |
| "Resume Printer" = "Resume Printer"; |
| "Return Address" = "Return Address"; |
| "Rewind" = "Rewind"; |
| "SEQUENCE uses indefinite length" = "SEQUENCE uses indefinite length"; |
| "SSL/TLS Negotiation Error" = "SSL/TLS Negotiation Error"; |
| "Second Roll (DUO/Twin Only)" = "Second Roll (DUO/Twin Only)"; |
| "See Other" = "See Other"; |
| "See remote printer." = "See remote printer."; |
| "Self-signed credentials are blocked." = "Self-signed credentials are blocked."; |
| "Sending data to printer." = "Sending data to printer."; |
| "Server Restarted" = "Server Restarted"; |
| "Server Security Auditing" = "Server Security Auditing"; |
| "Server Started" = "Server Started"; |
| "Server Stopped" = "Server Stopped"; |
| "Server credentials not set." = "Server credentials not set."; |
| "Service Unavailable" = "Service Unavailable"; |
| "Set Allowed Users" = "Set Allowed Users"; |
| "Set As Server Default" = "Set As Server Default"; |
| "Set Class Options" = "Set Class Options"; |
| "Set Printer Options" = "Set Printer Options"; |
| "Set Publishing" = "Set Publishing"; |
| "Shipping Address" = "Shipping Address"; |
| "Short-Edge (Landscape)" = "Short-Edge (Landscape)"; |
| "Special Paper" = "Special Paper"; |
| "Spooling job, %.0f%% complete." = "Spooling job, %.0f%% complete."; |
| "Standard" = "Standard"; |
| "Staple" = "Staple"; |
| // TRANSLATORS: Banner/cover sheet before the print job. |
| "Starting Banner" = "Starting Banner"; |
| "Starting page %d." = "Starting page %d."; |
| "Statement" = "Statement"; |
| "Subscription #%d does not exist." = "Subscription #%d does not exist."; |
| "Substitutions:" = "Substitutions:"; |
| "Super A" = "Super A"; |
| "Super B" = "Super B"; |
| "Super B/A3" = "Super B/A3"; |
| "Switching Protocols" = "Switching Protocols"; |
| "Tabloid" = "Tabloid"; |
| "Tabloid Oversize" = "Tabloid Oversize"; |
| "Tabloid Oversize Long Edge" = "Tabloid Oversize Long Edge"; |
| "Tear" = "Tear"; |
| "Tear-Off" = "Tear-Off"; |
| "Tear-Off Adjust Position" = "Tear-Off Adjust Position"; |
| "The \"%s\" attribute is required for print jobs." = "The “%s” attribute is required for print jobs."; |
| "The %s attribute cannot be provided with job-ids." = "The %s attribute cannot be provided with job-ids."; |
| "The '%s' Job Status attribute cannot be supplied in a job creation request." = "The ‘%s’ Job Status attribute cannot be supplied in a job creation request."; |
| "The '%s' operation attribute cannot be supplied in a Create-Job request." = "The ‘%s’ operation attribute cannot be supplied in a Create-Job request."; |
| "The PPD file \"%s\" could not be found." = "The PPD file “%s” could not be found."; |
| "The PPD file \"%s\" could not be opened: %s" = "The PPD file “%s” could not be opened: %s"; |
| "The PPD file could not be opened." = "The PPD file could not be opened."; |
| "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)."; |
| "The notify-lease-duration attribute cannot be used with job subscriptions." = "The notify-lease-duration attribute cannot be used with job subscriptions."; |
| "The notify-user-data value is too large (%d > 63 octets)." = "The notify-user-data value is too large (%d > 63 octets)."; |
| "The printer configuration is incorrect or the printer no longer exists." = "The printer configuration is incorrect or the printer no longer exists."; |
| "The printer did not respond." = "The printer did not respond."; |
| "The printer is in use." = "The printer is in use."; |
| "The printer is not connected." = "The printer is not connected."; |
| "The printer is not responding." = "The printer is not responding."; |
| "The printer is now connected." = "The printer is now connected."; |
| "The printer is now online." = "The printer is now online."; |
| "The printer is offline." = "The printer is offline."; |
| "The printer is unreachable at this time." = "The printer is unreachable at this time."; |
| "The printer may not exist or is unavailable at this time." = "The printer may not exist or is unavailable at this time."; |
| "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (' \"), question mark (?), or the pound sign (#)." = "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (’ ″), question mark (?), or the pound sign (#)."; |
| "The printer or class does not exist." = "The printer or class does not exist."; |
| "The printer or class is not shared." = "The printer or class is not shared."; |
| "The printer-uri \"%s\" contains invalid characters." = "The printer-uri “%s” contains invalid characters."; |
| "The printer-uri attribute is required." = "The printer-uri attribute is required."; |
| "The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/classes/CLASSNAME”."; |
| "The printer-uri must be of the form \"ipp://HOSTNAME/printers/PRINTERNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/printers/PRINTERNAME”."; |
| "The web interface is currently disabled. Run \"cupsctl WebInterface=yes\" to enable it." = "The web interface is currently disabled. Run “cupsctl WebInterface=yes” to enable it."; |
| "The which-jobs value \"%s\" is not supported." = "The which-jobs value “%s” is not supported."; |
| "There are too many subscriptions." = "There are too many subscriptions."; |
| "There was an unrecoverable USB error." = "There was an unrecoverable USB error."; |
| "Thermal Transfer Media" = "Thermal Transfer Media"; |
| "Too many active jobs." = "Too many active jobs."; |
| "Too many job-sheets values (%d > 2)." = "Too many job-sheets values (%d > 2)."; |
| "Too many printer-state-reasons values (%d > %d)." = "Too many printer-state-reasons values (%d > %d)."; |
| "Transparency" = "Transparency"; |
| "Tray" = "Tray"; |
| "Tray 1" = "Tray 1"; |
| "Tray 2" = "Tray 2"; |
| "Tray 3" = "Tray 3"; |
| "Tray 4" = "Tray 4"; |
| "Trust on first use is disabled." = "Trust on first use is disabled."; |
| "URI Too Long" = "URI Too Long"; |
| "URI too large" = "URI too large"; |
| "US Fanfold" = "US Fanfold"; |
| "US Ledger" = "US Ledger"; |
| "US Legal" = "US Legal"; |
| "US Legal Oversize" = "US Legal Oversize"; |
| "US Letter" = "US Letter"; |
| "US Letter Long Edge" = "US Letter Long Edge"; |
| "US Letter Oversize" = "US Letter Oversize"; |
| "US Letter Oversize Long Edge" = "US Letter Oversize Long Edge"; |
| "US Letter Small" = "US Letter Small"; |
| "Unable to access cupsd.conf file" = "Unable to access cupsd.conf file"; |
| "Unable to access help file." = "Unable to access help file."; |
| "Unable to add class" = "Unable to add class"; |
| "Unable to add document to print job." = "Unable to add document to print job."; |
| "Unable to add job for destination \"%s\"." = "Unable to add job for destination “%s”."; |
| "Unable to add printer" = "Unable to add printer"; |
| "Unable to allocate memory for file types." = "Unable to allocate memory for file types."; |
| "Unable to allocate memory for page info" = "Unable to allocate memory for page info"; |
| "Unable to allocate memory for pages array" = "Unable to allocate memory for pages array"; |
| "Unable to allocate memory for printer" = "Unable to allocate memory for printer"; |
| "Unable to cancel print job." = "Unable to cancel print job."; |
| "Unable to change printer" = "Unable to change printer"; |
| "Unable to change printer-is-shared attribute" = "Unable to change printer-is-shared attribute"; |
| "Unable to change server settings" = "Unable to change server settings"; |
| "Unable to compile mimeMediaType regular expression: %s." = "Unable to compile mimeMediaType regular expression: %s."; |
| "Unable to compile naturalLanguage regular expression: %s." = "Unable to compile naturalLanguage regular expression: %s."; |
| "Unable to configure printer options." = "Unable to configure printer options."; |
| "Unable to connect to host." = "Unable to connect to host."; |
| "Unable to contact printer, queuing on next printer in class." = "Unable to contact printer, queuing on next printer in class."; |
| "Unable to copy PPD file - %s" = "Unable to copy PPD file - %s"; |
| "Unable to copy PPD file." = "Unable to copy PPD file."; |
| "Unable to create credentials from array." = "Unable to create credentials from array."; |
| "Unable to create printer-uri" = "Unable to create printer-uri"; |
| "Unable to create printer." = "Unable to create printer."; |
| "Unable to create server credentials." = "Unable to create server credentials."; |
| "Unable to create spool directory \"%s\": %s" = "Unable to create spool directory “%s”: %s"; |
| "Unable to create temporary file" = "Unable to create temporary file"; |
| "Unable to delete class" = "Unable to delete class"; |
| "Unable to delete printer" = "Unable to delete printer"; |
| "Unable to do maintenance command" = "Unable to do maintenance command"; |
| "Unable to edit cupsd.conf files larger than 1MB" = "Unable to edit cupsd.conf files larger than 1MB"; |
| "Unable to establish a secure connection to host (%d)." = "Unable to establish a secure connection to host (%d)."; |
| "Unable to establish a secure connection to host (certificate chain invalid)." = "Unable to establish a secure connection to host (certificate chain invalid)."; |
| "Unable to establish a secure connection to host (certificate not yet valid)." = "Unable to establish a secure connection to host (certificate not yet valid)."; |
| "Unable to establish a secure connection to host (expired certificate)." = "Unable to establish a secure connection to host (expired certificate)."; |
| "Unable to establish a secure connection to host (host name mismatch)." = "Unable to establish a secure connection to host (host name mismatch)."; |
| "Unable to establish a secure connection to host (peer dropped connection before responding)." = "Unable to establish a secure connection to host (peer dropped connection before responding)."; |
| "Unable to establish a secure connection to host (self-signed certificate)." = "Unable to establish a secure connection to host (self-signed certificate)."; |
| "Unable to establish a secure connection to host (untrusted certificate)." = "Unable to establish a secure connection to host (untrusted certificate)."; |
| "Unable to establish a secure connection to host." = "Unable to establish a secure connection to host."; |
| "Unable to execute command \"%s\": %s" = "Unable to execute command “%s”: %s"; |
| "Unable to find destination for job" = "Unable to find destination for job"; |
| "Unable to find printer." = "Unable to find printer."; |
| "Unable to find server credentials." = "Unable to find server credentials."; |
| "Unable to get backend exit status." = "Unable to get backend exit status."; |
| "Unable to get class list" = "Unable to get class list"; |
| "Unable to get class status" = "Unable to get class status"; |
| "Unable to get list of printer drivers" = "Unable to get list of printer drivers"; |
| "Unable to get printer attributes" = "Unable to get printer attributes"; |
| "Unable to get printer list" = "Unable to get printer list"; |
| "Unable to get printer status" = "Unable to get printer status"; |
| "Unable to get printer status." = "Unable to get printer status."; |
| "Unable to load help index." = "Unable to load help index."; |
| "Unable to locate printer \"%s\"." = "Unable to locate printer “%s”."; |
| "Unable to locate printer." = "Unable to locate printer."; |
| "Unable to modify class" = "Unable to modify class"; |
| "Unable to modify printer" = "Unable to modify printer"; |
| "Unable to move job" = "Unable to move job"; |
| "Unable to move jobs" = "Unable to move jobs"; |
| "Unable to open PPD file" = "Unable to open PPD file"; |
| "Unable to open cupsd.conf file:" = "Unable to open cupsd.conf file:"; |
| "Unable to open device file" = "Unable to open device file"; |
| "Unable to open document #%d in job #%d." = "Unable to open document #%d in job #%d."; |
| "Unable to open help file." = "Unable to open help file."; |
| "Unable to open print file" = "Unable to open print file"; |
| "Unable to open raster file" = "Unable to open raster file"; |
| "Unable to print test page" = "Unable to print test page"; |
| "Unable to read print data." = "Unable to read print data."; |
| "Unable to register \"%s.%s\": %d" = "Unable to register “%s.%s”: %d"; |
| "Unable to rename job document file." = "Unable to rename job document file."; |
| "Unable to resolve printer-uri." = "Unable to resolve printer-uri."; |
| "Unable to see in file" = "Unable to see in file"; |
| "Unable to send command to printer driver" = "Unable to send command to printer driver"; |
| "Unable to send data to printer." = "Unable to send data to printer."; |
| "Unable to set options" = "Unable to set options"; |
| "Unable to set server default" = "Unable to set server default"; |
| "Unable to start backend process." = "Unable to start backend process."; |
| "Unable to upload cupsd.conf file" = "Unable to upload cupsd.conf file"; |
| "Unable to use legacy USB class driver." = "Unable to use legacy USB class driver."; |
| "Unable to write print data" = "Unable to write print data"; |
| "Unable to write uncompressed print data: %s" = "Unable to write uncompressed print data: %s"; |
| "Unauthorized" = "Unauthorized"; |
| "Units" = "Units"; |
| "Unknown" = "Unknown"; |
| "Unknown choice \"%s\" for option \"%s\"." = "Unknown choice “%s” for option “%s”."; |
| "Unknown directive \"%s\" on line %d of \"%s\" ignored." = "Unknown directive “%s” on line %d of “%s” ignored."; |
| "Unknown encryption option value: \"%s\"." = "Unknown encryption option value: “%s”."; |
| "Unknown file order: \"%s\"." = "Unknown file order: “%s”."; |
| "Unknown format character: \"%c\"." = "Unknown format character: “%c”."; |
| "Unknown hash algorithm." = "Unknown hash algorithm."; |
| "Unknown media size name." = "Unknown media size name."; |
| "Unknown option \"%s\" with value \"%s\"." = "Unknown option “%s” with value “%s”."; |
| "Unknown option \"%s\"." = "Unknown option “%s”."; |
| "Unknown print mode: \"%s\"." = "Unknown print mode: “%s”."; |
| "Unknown printer-error-policy \"%s\"." = "Unknown printer-error-policy “%s”."; |
| "Unknown printer-op-policy \"%s\"." = "Unknown printer-op-policy “%s”."; |
| "Unknown request method." = "Unknown request method."; |
| "Unknown request version." = "Unknown request version."; |
| "Unknown scheme in URI" = "Unknown scheme in URI"; |
| "Unknown service name." = "Unknown service name."; |
| "Unknown version option value: \"%s\"." = "Unknown version option value: “%s”."; |
| "Unsupported 'compression' value \"%s\"." = "Unsupported ‘compression’ value “%s”."; |
| "Unsupported 'document-format' value \"%s\"." = "Unsupported ‘document-format’ value “%s”."; |
| "Unsupported 'job-hold-until' value." = "Unsupported ‘job-hold-until’ value."; |
| "Unsupported 'job-name' value." = "Unsupported ‘job-name’ value."; |
| "Unsupported character set \"%s\"." = "Unsupported character set “%s”."; |
| "Unsupported compression \"%s\"." = "Unsupported compression “%s”."; |
| "Unsupported document-format \"%s\"." = "Unsupported document-format “%s”."; |
| "Unsupported document-format \"%s/%s\"." = "Unsupported document-format “%s/%s”."; |
| "Unsupported format \"%s\"." = "Unsupported format “%s”."; |
| "Unsupported margins." = "Unsupported margins."; |
| "Unsupported media value." = "Unsupported media value."; |
| "Unsupported number-up value %d, using number-up=1." = "Unsupported number-up value %d, using number-up=1."; |
| "Unsupported number-up-layout value %s, using number-up-layout=lrtb." = "Unsupported number-up-layout value %s, using number-up-layout=lrtb."; |
| "Unsupported page-border value %s, using page-border=none." = "Unsupported page-border value %s, using page-border=none."; |
| "Unsupported raster data." = "Unsupported raster data."; |
| "Unsupported value type" = "Unsupported value type"; |
| "Upgrade Required" = "Upgrade Required"; |
| "Usage: %s [options] destination(s)" = "Usage: %s [options] destination(s)"; |
| "Usage: %s job-id user title copies options [file]" = "Usage: %s job-id user title copies options [file]"; |
| "Usage: cancel [options] [id]\n cancel [options] [destination]\n cancel [options] [destination-id]" = "Usage: cancel [options] [id]\n cancel [options] [destination]\n cancel [options] [destination-id]"; |
| "Usage: cupsctl [options] [param=value ... paramN=valueN]" = "Usage: cupsctl [options] [param=value … paramN=valueN]"; |
| "Usage: cupsd [options]" = "Usage: cupsd [options]"; |
| "Usage: cupsfilter [ options ] [ -- ] filename" = "Usage: cupsfilter [ options ] [ -- ] filename"; |
| "Usage: cupstestppd [options] filename1.ppd[.gz] [... filenameN.ppd[.gz]]\n program | cupstestppd [options] -" = "Usage: cupstestppd [options] filename1.ppd[.gz] [… filenameN.ppd[.gz]]\n program | cupstestppd [options] -"; |
| "Usage: ippeveprinter [options] \"name\"" = "Usage: ippeveprinter [options] “name”"; |
| "Usage: ippfind [options] regtype[,subtype][.domain.] ... [expression]\n ippfind [options] name[.regtype[.domain.]] ... [expression]\n ippfind --help\n ippfind --version" = "Usage: ippfind [options] regtype[,subtype][.domain.] … [expression]\n ippfind [options] name[.regtype[.domain.]] … [expression]\n ippfind --help\n ippfind --version"; |
| "Usage: ipptool [options] URI filename [ ... filenameN ]" = "Usage: ipptool [options] URI filename [ … filenameN ]"; |
| "Usage: lp [options] [--] [file(s)]\n lp [options] -i id" = "Usage: lp [options] [--] [file(s)]\n lp [options] -i id"; |
| "Usage: lpadmin [options] -d destination\n lpadmin [options] -p destination\n lpadmin [options] -p destination -c class\n lpadmin [options] -p destination -r class\n lpadmin [options] -x destination" = "Usage: lpadmin [options] -d destination\n lpadmin [options] -p destination\n lpadmin [options] -p destination -c class\n lpadmin [options] -p destination -r class\n lpadmin [options] -x destination"; |
| "Usage: lpinfo [options] -m\n lpinfo [options] -v" = "Usage: lpinfo [options] -m\n lpinfo [options] -v"; |
| "Usage: lpmove [options] job destination\n lpmove [options] source-destination destination" = "Usage: lpmove [options] job destination\n lpmove [options] source-destination destination"; |
| "Usage: lpoptions [options] -d destination\n lpoptions [options] [-p destination] [-l]\n lpoptions [options] [-p destination] -o option[=value]\n lpoptions [options] -x destination" = "Usage: lpoptions [options] -d destination\n lpoptions [options] [-p destination] [-l]\n lpoptions [options] [-p destination] -o option[=value]\n lpoptions [options] -x destination"; |
| "Usage: lpq [options] [+interval]" = "Usage: lpq [options] [+interval]"; |
| "Usage: lpr [options] [file(s)]" = "Usage: lpr [options] [file(s)]"; |
| "Usage: lprm [options] [id]\n lprm [options] -" = "Usage: lprm [options] [id]\n lprm [options] -"; |
| "Usage: lpstat [options]" = "Usage: lpstat [options]"; |
| "Usage: ppdc [options] filename.drv [ ... filenameN.drv ]" = "Usage: ppdc [options] filename.drv [ … filenameN.drv ]"; |
| "Usage: ppdhtml [options] filename.drv >filename.html" = "Usage: ppdhtml [options] filename.drv >filename.html"; |
| "Usage: ppdi [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdi [options] filename.ppd [ … filenameN.ppd ]"; |
| "Usage: ppdmerge [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdmerge [options] filename.ppd [ … filenameN.ppd ]"; |
| "Usage: ppdpo [options] -o filename.po filename.drv [ ... filenameN.drv ]" = "Usage: ppdpo [options] -o filename.po filename.drv [ … filenameN.drv ]"; |
| "Usage: snmp [host-or-ip-address]" = "Usage: snmp [host-or-ip-address]"; |
| "Using spool directory \"%s\"." = "Using spool directory “%s”."; |
| "Value uses indefinite length" = "Value uses indefinite length"; |
| "VarBind uses indefinite length" = "VarBind uses indefinite length"; |
| "Version uses indefinite length" = "Version uses indefinite length"; |
| "Waiting for job to complete." = "Waiting for job to complete."; |
| "Waiting for printer to become available." = "Waiting for printer to become available."; |
| "Waiting for printer to finish." = "Waiting for printer to finish."; |
| "Warning: This program will be removed in a future version of CUPS." = "Warning: This program will be removed in a future version of CUPS."; |
| "Web Interface is Disabled" = "Web Interface is Disabled"; |
| "Yes" = "Yes"; |
| "You cannot access this page." = "You cannot access this page."; |
| "You must access this page using the URL https://%s:%d%s." = "You must access this page using the URL https://%s:%d%s."; |
| "Your account does not have the necessary privileges." = "Your account does not have the necessary privileges."; |
| "ZPL Label Printer" = "ZPL Label Printer"; |
| "Zebra" = "Zebra"; |
| "aborted" = "aborted"; |
| // TRANSLATORS: Accuracy Units |
| "accuracy-units" = "Accuracy Units"; |
| // TRANSLATORS: Millimeters |
| "accuracy-units.mm" = "Millimeters"; |
| // TRANSLATORS: Nanometers |
| "accuracy-units.nm" = "Nanometers"; |
| // TRANSLATORS: Micrometers |
| "accuracy-units.um" = "Micrometers"; |
| // TRANSLATORS: Bale Output |
| "baling" = "Bale Output"; |
| // TRANSLATORS: Bale Using |
| "baling-type" = "Bale Using"; |
| // TRANSLATORS: Band |
| "baling-type.band" = "Band"; |
| // TRANSLATORS: Shrink Wrap |
| "baling-type.shrink-wrap" = "Shrink Wrap"; |
| // TRANSLATORS: Wrap |
| "baling-type.wrap" = "Wrap"; |
| // TRANSLATORS: Bale After |
| "baling-when" = "Bale After"; |
| // TRANSLATORS: Job |
| "baling-when.after-job" = "Job"; |
| // TRANSLATORS: Sets |
| "baling-when.after-sets" = "Sets"; |
| // TRANSLATORS: Bind Output |
| "binding" = "Bind Output"; |
| // TRANSLATORS: Bind Edge |
| "binding-reference-edge" = "Bind Edge"; |
| // TRANSLATORS: Bottom |
| "binding-reference-edge.bottom" = "Bottom"; |
| // TRANSLATORS: Left |
| "binding-reference-edge.left" = "Left"; |
| // TRANSLATORS: Right |
| "binding-reference-edge.right" = "Right"; |
| // TRANSLATORS: Top |
| "binding-reference-edge.top" = "Top"; |
| // TRANSLATORS: Binder Type |
| "binding-type" = "Binder Type"; |
| // TRANSLATORS: Adhesive |
| "binding-type.adhesive" = "Adhesive"; |
| // TRANSLATORS: Comb |
| "binding-type.comb" = "Comb"; |
| // TRANSLATORS: Flat |
| "binding-type.flat" = "Flat"; |
| // TRANSLATORS: Padding |
| "binding-type.padding" = "Padding"; |
| // TRANSLATORS: Perfect |
| "binding-type.perfect" = "Perfect"; |
| // TRANSLATORS: Spiral |
| "binding-type.spiral" = "Spiral"; |
| // TRANSLATORS: Tape |
| "binding-type.tape" = "Tape"; |
| // TRANSLATORS: Velo |
| "binding-type.velo" = "Velo"; |
| "canceled" = "canceled"; |
| // TRANSLATORS: Chamber Humidity |
| "chamber-humidity" = "Chamber Humidity"; |
| // TRANSLATORS: Chamber Temperature |
| "chamber-temperature" = "Chamber Temperature"; |
| // TRANSLATORS: Print Job Cost |
| "charge-info-message" = "Print Job Cost"; |
| // TRANSLATORS: Coat Sheets |
| "coating" = "Coat Sheets"; |
| // TRANSLATORS: Add Coating To |
| "coating-sides" = "Add Coating To"; |
| // TRANSLATORS: Back |
| "coating-sides.back" = "Back"; |
| // TRANSLATORS: Front and Back |
| "coating-sides.both" = "Front and Back"; |
| // TRANSLATORS: Front |
| "coating-sides.front" = "Front"; |
| // TRANSLATORS: Type of Coating |
| "coating-type" = "Type of Coating"; |
| // TRANSLATORS: Archival |
| "coating-type.archival" = "Archival"; |
| // TRANSLATORS: Archival Glossy |
| "coating-type.archival-glossy" = "Archival Glossy"; |
| // TRANSLATORS: Archival Matte |
| "coating-type.archival-matte" = "Archival Matte"; |
| // TRANSLATORS: Archival Semi Gloss |
| "coating-type.archival-semi-gloss" = "Archival Semi Gloss"; |
| // TRANSLATORS: Glossy |
| "coating-type.glossy" = "Glossy"; |
| // TRANSLATORS: High Gloss |
| "coating-type.high-gloss" = "High Gloss"; |
| // TRANSLATORS: Matte |
| "coating-type.matte" = "Matte"; |
| // TRANSLATORS: Semi-gloss |
| "coating-type.semi-gloss" = "Semi-gloss"; |
| // TRANSLATORS: Silicone |
| "coating-type.silicone" = "Silicone"; |
| // TRANSLATORS: Translucent |
| "coating-type.translucent" = "Translucent"; |
| "completed" = "completed"; |
| // TRANSLATORS: Print Confirmation Sheet |
| "confirmation-sheet-print" = "Print Confirmation Sheet"; |
| // TRANSLATORS: Copies |
| "copies" = "Copies"; |
| // TRANSLATORS: Back Cover |
| "cover-back" = "Back Cover"; |
| // TRANSLATORS: Front Cover |
| "cover-front" = "Front Cover"; |
| // TRANSLATORS: Cover Sheet Info |
| "cover-sheet-info" = "Cover Sheet Info"; |
| // TRANSLATORS: Date Time |
| "cover-sheet-info-supported.date-time" = "Date Time"; |
| // TRANSLATORS: From Name |
| "cover-sheet-info-supported.from-name" = "From Name"; |
| // TRANSLATORS: Logo |
| "cover-sheet-info-supported.logo" = "Logo"; |
| // TRANSLATORS: Message |
| "cover-sheet-info-supported.message" = "Message"; |
| // TRANSLATORS: Organization |
| "cover-sheet-info-supported.organization" = "Organization"; |
| // TRANSLATORS: Subject |
| "cover-sheet-info-supported.subject" = "Subject"; |
| // TRANSLATORS: To Name |
| "cover-sheet-info-supported.to-name" = "To Name"; |
| // TRANSLATORS: Printed Cover |
| "cover-type" = "Printed Cover"; |
| // TRANSLATORS: No Cover |
| "cover-type.no-cover" = "No Cover"; |
| // TRANSLATORS: Back Only |
| "cover-type.print-back" = "Back Only"; |
| // TRANSLATORS: Front and Back |
| "cover-type.print-both" = "Front and Back"; |
| // TRANSLATORS: Front Only |
| "cover-type.print-front" = "Front Only"; |
| // TRANSLATORS: None |
| "cover-type.print-none" = "None"; |
| // TRANSLATORS: Cover Output |
| "covering" = "Cover Output"; |
| // TRANSLATORS: Add Cover |
| "covering-name" = "Add Cover"; |
| // TRANSLATORS: Plain |
| "covering-name.plain" = "Plain"; |
| // TRANSLATORS: Pre-cut |
| "covering-name.pre-cut" = "Pre-cut"; |
| // TRANSLATORS: Pre-printed |
| "covering-name.pre-printed" = "Pre-printed"; |
| "cups-deviced failed to execute." = "cups-deviced failed to execute."; |
| "cups-driverd failed to execute." = "cups-driverd failed to execute."; |
| "cupsctl: Cannot set %s directly." = "cupsctl: Cannot set %s directly."; |
| "cupsctl: Unable to connect to server: %s" = "cupsctl: Unable to connect to server: %s"; |
| "cupsctl: Unknown option \"%s\"" = "cupsctl: Unknown option “%s”"; |
| "cupsctl: Unknown option \"-%c\"" = "cupsctl: Unknown option “-%c”"; |
| "cupsd: Expected config filename after \"-c\" option." = "cupsd: Expected config filename after “-c” option."; |
| "cupsd: Expected cups-files.conf filename after \"-s\" option." = "cupsd: Expected cups-files.conf filename after “-s” option."; |
| "cupsd: On-demand support not compiled in, running in normal mode." = "cupsd: On-demand support not compiled in, running in normal mode."; |
| "cupsd: Relative cups-files.conf filename not allowed." = "cupsd: Relative cups-files.conf filename not allowed."; |
| "cupsd: Unable to get current directory." = "cupsd: Unable to get current directory."; |
| "cupsd: Unable to get path to cups-files.conf file." = "cupsd: Unable to get path to cups-files.conf file."; |
| "cupsd: Unknown argument \"%s\" - aborting." = "cupsd: Unknown argument “%s” - aborting."; |
| "cupsd: Unknown option \"%c\" - aborting." = "cupsd: Unknown option “%c” - aborting."; |
| "cupsfilter: Invalid document number %d." = "cupsfilter: Invalid document number %d."; |
| "cupsfilter: Invalid job ID %d." = "cupsfilter: Invalid job ID %d."; |
| "cupsfilter: Only one filename can be specified." = "cupsfilter: Only one filename can be specified."; |
| "cupsfilter: Unable to get job file - %s" = "cupsfilter: Unable to get job file - %s"; |
| "cupstestppd: The -q option is incompatible with the -v option." = "cupstestppd: The -q option is incompatible with the -v option."; |
| "cupstestppd: The -v option is incompatible with the -q option." = "cupstestppd: The -v option is incompatible with the -q option."; |
| // TRANSLATORS: Detailed Status Message |
| "detailed-status-message" = "Detailed Status Message"; |
| "device for %s/%s: %s" = "device for %s/%s: %s"; |
| "device for %s: %s" = "device for %s: %s"; |
| // TRANSLATORS: Copies |
| "document-copies" = "Copies"; |
| // TRANSLATORS: Document Privacy Attributes |
| "document-privacy-attributes" = "Document Privacy Attributes"; |
| // TRANSLATORS: All |
| "document-privacy-attributes.all" = "All"; |
| // TRANSLATORS: Default |
| "document-privacy-attributes.default" = "Default"; |
| // TRANSLATORS: Document Description |
| "document-privacy-attributes.document-description" = "Document Description"; |
| // TRANSLATORS: Document Template |
| "document-privacy-attributes.document-template" = "Document Template"; |
| // TRANSLATORS: None |
| "document-privacy-attributes.none" = "None"; |
| // TRANSLATORS: Document Privacy Scope |
| "document-privacy-scope" = "Document Privacy Scope"; |
| // TRANSLATORS: All |
| "document-privacy-scope.all" = "All"; |
| // TRANSLATORS: Default |
| "document-privacy-scope.default" = "Default"; |
| // TRANSLATORS: None |
| "document-privacy-scope.none" = "None"; |
| // TRANSLATORS: Owner |
| "document-privacy-scope.owner" = "Owner"; |
| // TRANSLATORS: Document State |
| "document-state" = "Document State"; |
| // TRANSLATORS: Detailed Document State |
| "document-state-reasons" = "Detailed Document State"; |
| // TRANSLATORS: Aborted By System |
| "document-state-reasons.aborted-by-system" = "Aborted By System"; |
| // TRANSLATORS: Canceled At Device |
| "document-state-reasons.canceled-at-device" = "Canceled At Device"; |
| // TRANSLATORS: Canceled By Operator |
| "document-state-reasons.canceled-by-operator" = "Canceled By Operator"; |
| // TRANSLATORS: Canceled By User |
| "document-state-reasons.canceled-by-user" = "Canceled By User"; |
| // TRANSLATORS: Completed Successfully |
| "document-state-reasons.completed-successfully" = "Completed Successfully"; |
| // TRANSLATORS: Completed With Errors |
| "document-state-reasons.completed-with-errors" = "Completed With Errors"; |
| // TRANSLATORS: Completed With Warnings |
| "document-state-reasons.completed-with-warnings" = "Completed With Warnings"; |
| // TRANSLATORS: Compression Error |
| "document-state-reasons.compression-error" = "Compression Error"; |
| // TRANSLATORS: Data Insufficient |
| "document-state-reasons.data-insufficient" = "Data Insufficient"; |
| // TRANSLATORS: Digital Signature Did Not Verify |
| "document-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify"; |
| // TRANSLATORS: Digital Signature Type Not Supported |
| "document-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported"; |
| // TRANSLATORS: Digital Signature Wait |
| "document-state-reasons.digital-signature-wait" = "Digital Signature Wait"; |
| // TRANSLATORS: Document Access Error |
| "document-state-reasons.document-access-error" = "Document Access Error"; |
| // TRANSLATORS: Document Fetchable |
| "document-state-reasons.document-fetchable" = "Document Fetchable"; |
| // TRANSLATORS: Document Format Error |
| "document-state-reasons.document-format-error" = "Document Format Error"; |
| // TRANSLATORS: Document Password Error |
| "document-state-reasons.document-password-error" = "Document Password Error"; |
| // TRANSLATORS: Document Permission Error |
| "document-state-reasons.document-permission-error" = "Document Permission Error"; |
| // TRANSLATORS: Document Security Error |
| "document-state-reasons.document-security-error" = "Document Security Error"; |
| // TRANSLATORS: Document Unprintable Error |
| "document-state-reasons.document-unprintable-error" = "Document Unprintable Error"; |
| // TRANSLATORS: Errors Detected |
| "document-state-reasons.errors-detected" = "Errors Detected"; |
| // TRANSLATORS: Incoming |
| "document-state-reasons.incoming" = "Incoming"; |
| // TRANSLATORS: Interpreting |
| "document-state-reasons.interpreting" = "Interpreting"; |
| // TRANSLATORS: None |
| "document-state-reasons.none" = "None"; |
| // TRANSLATORS: Outgoing |
| "document-state-reasons.outgoing" = "Outgoing"; |
| // TRANSLATORS: Printing |
| "document-state-reasons.printing" = "Printing"; |
| // TRANSLATORS: Processing To Stop Point |
| "document-state-reasons.processing-to-stop-point" = "Processing To Stop Point"; |
| // TRANSLATORS: Queued |
| "document-state-reasons.queued" = "Queued"; |
| // TRANSLATORS: Queued For Marker |
| "document-state-reasons.queued-for-marker" = "Queued For Marker"; |
| // TRANSLATORS: Queued In Device |
| "document-state-reasons.queued-in-device" = "Queued In Device"; |
| // TRANSLATORS: Resources Are Not Ready |
| "document-state-reasons.resources-are-not-ready" = "Resources Are Not Ready"; |
| // TRANSLATORS: Resources Are Not Supported |
| "document-state-reasons.resources-are-not-supported" = "Resources Are Not Supported"; |
| // TRANSLATORS: Submission Interrupted |
| "document-state-reasons.submission-interrupted" = "Submission Interrupted"; |
| // TRANSLATORS: Transforming |
| "document-state-reasons.transforming" = "Transforming"; |
| // TRANSLATORS: Unsupported Compression |
| "document-state-reasons.unsupported-compression" = "Unsupported Compression"; |
| // TRANSLATORS: Unsupported Document Format |
| "document-state-reasons.unsupported-document-format" = "Unsupported Document Format"; |
| // TRANSLATORS: Warnings Detected |
| "document-state-reasons.warnings-detected" = "Warnings Detected"; |
| // TRANSLATORS: Pending |
| "document-state.3" = "Pending"; |
| // TRANSLATORS: Processing |
| "document-state.5" = "Processing"; |
| // TRANSLATORS: Stopped |
| "document-state.6" = "Stopped"; |
| // TRANSLATORS: Canceled |
| "document-state.7" = "Canceled"; |
| // TRANSLATORS: Aborted |
| "document-state.8" = "Aborted"; |
| // TRANSLATORS: Completed |
| "document-state.9" = "Completed"; |
| "error-index uses indefinite length" = "error-index uses indefinite length"; |
| "error-status uses indefinite length" = "error-status uses indefinite length"; |
| "expression --and expression\n Logical AND" = "expression --and expression\n Logical AND"; |
| "expression --or expression\n Logical OR" = "expression --or expression\n Logical OR"; |
| "expression expression Logical AND" = "expression expression Logical AND"; |
| // TRANSLATORS: Feed Orientation |
| "feed-orientation" = "Feed Orientation"; |
| // TRANSLATORS: Long Edge First |
| "feed-orientation.long-edge-first" = "Long Edge First"; |
| // TRANSLATORS: Short Edge First |
| "feed-orientation.short-edge-first" = "Short Edge First"; |
| // TRANSLATORS: Fetch Status Code |
| "fetch-status-code" = "Fetch Status Code"; |
| // TRANSLATORS: Finishing Template |
| "finishing-template" = "Finishing Template"; |
| // TRANSLATORS: Bale |
| "finishing-template.bale" = "Bale"; |
| // TRANSLATORS: Bind |
| "finishing-template.bind" = "Bind"; |
| // TRANSLATORS: Bind Bottom |
| "finishing-template.bind-bottom" = "Bind Bottom"; |
| // TRANSLATORS: Bind Left |
| "finishing-template.bind-left" = "Bind Left"; |
| // TRANSLATORS: Bind Right |
| "finishing-template.bind-right" = "Bind Right"; |
| // TRANSLATORS: Bind Top |
| "finishing-template.bind-top" = "Bind Top"; |
| // TRANSLATORS: Booklet Maker |
| "finishing-template.booklet-maker" = "Booklet Maker"; |
| // TRANSLATORS: Coat |
| "finishing-template.coat" = "Coat"; |
| // TRANSLATORS: Cover |
| "finishing-template.cover" = "Cover"; |
| // TRANSLATORS: Edge Stitch |
| "finishing-template.edge-stitch" = "Edge Stitch"; |
| // TRANSLATORS: Edge Stitch Bottom |
| "finishing-template.edge-stitch-bottom" = "Edge Stitch Bottom"; |
| // TRANSLATORS: Edge Stitch Left |
| "finishing-template.edge-stitch-left" = "Edge Stitch Left"; |
| // TRANSLATORS: Edge Stitch Right |
| "finishing-template.edge-stitch-right" = "Edge Stitch Right"; |
| // TRANSLATORS: Edge Stitch Top |
| "finishing-template.edge-stitch-top" = "Edge Stitch Top"; |
| // TRANSLATORS: Fold |
| "finishing-template.fold" = "Fold"; |
| // TRANSLATORS: Accordion Fold |
| "finishing-template.fold-accordion" = "Accordion Fold"; |
| // TRANSLATORS: Double Gate Fold |
| "finishing-template.fold-double-gate" = "Double Gate Fold"; |
| // TRANSLATORS: Engineering Z Fold |
| "finishing-template.fold-engineering-z" = "Engineering Z Fold"; |
| // TRANSLATORS: Gate Fold |
| "finishing-template.fold-gate" = "Gate Fold"; |
| // TRANSLATORS: Half Fold |
| "finishing-template.fold-half" = "Half Fold"; |
| // TRANSLATORS: Half Z Fold |
| "finishing-template.fold-half-z" = "Half Z Fold"; |
| // TRANSLATORS: Left Gate Fold |
| "finishing-template.fold-left-gate" = "Left Gate Fold"; |
| // TRANSLATORS: Letter Fold |
| "finishing-template.fold-letter" = "Letter Fold"; |
| // TRANSLATORS: Parallel Fold |
| "finishing-template.fold-parallel" = "Parallel Fold"; |
| // TRANSLATORS: Poster Fold |
| "finishing-template.fold-poster" = "Poster Fold"; |
| // TRANSLATORS: Right Gate Fold |
| "finishing-template.fold-right-gate" = "Right Gate Fold"; |
| // TRANSLATORS: Z Fold |
| "finishing-template.fold-z" = "Z Fold"; |
| // TRANSLATORS: JDF F10-1 |
| "finishing-template.jdf-f10-1" = "JDF F10-1"; |
| // TRANSLATORS: JDF F10-2 |
| "finishing-template.jdf-f10-2" = "JDF F10-2"; |
| // TRANSLATORS: JDF F10-3 |
| "finishing-template.jdf-f10-3" = "JDF F10-3"; |
| // TRANSLATORS: JDF F12-1 |
| "finishing-template.jdf-f12-1" = "JDF F12-1"; |
| // TRANSLATORS: JDF F12-10 |
| "finishing-template.jdf-f12-10" = "JDF F12-10"; |
| // TRANSLATORS: JDF F12-11 |
| "finishing-template.jdf-f12-11" = "JDF F12-11"; |
| // TRANSLATORS: JDF F12-12 |
| "finishing-template.jdf-f12-12" = "JDF F12-12"; |
| // TRANSLATORS: JDF F12-13 |
| "finishing-template.jdf-f12-13" = "JDF F12-13"; |
| // TRANSLATORS: JDF F12-14 |
| "finishing-template.jdf-f12-14" = "JDF F12-14"; |
| // TRANSLATORS: JDF F12-2 |
| "finishing-template.jdf-f12-2" = "JDF F12-2"; |
| // TRANSLATORS: JDF F12-3 |
| "finishing-template.jdf-f12-3" = "JDF F12-3"; |
| // TRANSLATORS: JDF F12-4 |
| "finishing-template.jdf-f12-4" = "JDF F12-4"; |
| // TRANSLATORS: JDF F12-5 |
| "finishing-template.jdf-f12-5" = "JDF F12-5"; |
| // TRANSLATORS: JDF F12-6 |
| "finishing-template.jdf-f12-6" = "JDF F12-6"; |
| // TRANSLATORS: JDF F12-7 |
| "finishing-template.jdf-f12-7" = "JDF F12-7"; |
| // TRANSLATORS: JDF F12-8 |
| "finishing-template.jdf-f12-8" = "JDF F12-8"; |
| // TRANSLATORS: JDF F12-9 |
| "finishing-template.jdf-f12-9" = "JDF F12-9"; |
| // TRANSLATORS: JDF F14-1 |
| "finishing-template.jdf-f14-1" = "JDF F14-1"; |
| // TRANSLATORS: JDF F16-1 |
| "finishing-template.jdf-f16-1" = "JDF F16-1"; |
| // TRANSLATORS: JDF F16-10 |
| "finishing-template.jdf-f16-10" = "JDF F16-10"; |
| // TRANSLATORS: JDF F16-11 |
| "finishing-template.jdf-f16-11" = "JDF F16-11"; |
| // TRANSLATORS: JDF F16-12 |
| "finishing-template.jdf-f16-12" = "JDF F16-12"; |
| // TRANSLATORS: JDF F16-13 |
| "finishing-template.jdf-f16-13" = "JDF F16-13"; |
| // TRANSLATORS: JDF F16-14 |
| "finishing-template.jdf-f16-14" = "JDF F16-14"; |
| // TRANSLATORS: JDF F16-2 |
| "finishing-template.jdf-f16-2" = "JDF F16-2"; |
| // TRANSLATORS: JDF F16-3 |
| "finishing-template.jdf-f16-3" = "JDF F16-3"; |
| // TRANSLATORS: JDF F16-4 |
| "finishing-template.jdf-f16-4" = "JDF F16-4"; |
| // TRANSLATORS: JDF F16-5 |
| "finishing-template.jdf-f16-5" = "JDF F16-5"; |
| // TRANSLATORS: JDF F16-6 |
| "finishing-template.jdf-f16-6" = "JDF F16-6"; |
| // TRANSLATORS: JDF F16-7 |
| "finishing-template.jdf-f16-7" = "JDF F16-7"; |
| // TRANSLATORS: JDF F16-8 |
| "finishing-template.jdf-f16-8" = "JDF F16-8"; |
| // TRANSLATORS: JDF F16-9 |
| "finishing-template.jdf-f16-9" = "JDF F16-9"; |
| // TRANSLATORS: JDF F18-1 |
| "finishing-template.jdf-f18-1" = "JDF F18-1"; |
| // TRANSLATORS: JDF F18-2 |
| "finishing-template.jdf-f18-2" = "JDF F18-2"; |
| // TRANSLATORS: JDF F18-3 |
| "finishing-template.jdf-f18-3" = "JDF F18-3"; |
| // TRANSLATORS: JDF F18-4 |
| "finishing-template.jdf-f18-4" = "JDF F18-4"; |
| // TRANSLATORS: JDF F18-5 |
| "finishing-template.jdf-f18-5" = "JDF F18-5"; |
| // TRANSLATORS: JDF F18-6 |
| "finishing-template.jdf-f18-6" = "JDF F18-6"; |
| // TRANSLATORS: JDF F18-7 |
| "finishing-template.jdf-f18-7" = "JDF F18-7"; |
| // TRANSLATORS: JDF F18-8 |
| "finishing-template.jdf-f18-8" = "JDF F18-8"; |
| // TRANSLATORS: JDF F18-9 |
| "finishing-template.jdf-f18-9" = "JDF F18-9"; |
| // TRANSLATORS: JDF F2-1 |
| "finishing-template.jdf-f2-1" = "JDF F2-1"; |
| // TRANSLATORS: JDF F20-1 |
| "finishing-template.jdf-f20-1" = "JDF F20-1"; |
| // TRANSLATORS: JDF F20-2 |
| "finishing-template.jdf-f20-2" = "JDF F20-2"; |
| // TRANSLATORS: JDF F24-1 |
| "finishing-template.jdf-f24-1" = "JDF F24-1"; |
| // TRANSLATORS: JDF F24-10 |
| "finishing-template.jdf-f24-10" = "JDF F24-10"; |
| // TRANSLATORS: JDF F24-11 |
| "finishing-template.jdf-f24-11" = "JDF F24-11"; |
| // TRANSLATORS: JDF F24-2 |
| "finishing-template.jdf-f24-2" = "JDF F24-2"; |
| // TRANSLATORS: JDF F24-3 |
| "finishing-template.jdf-f24-3" = "JDF F24-3"; |
| // TRANSLATORS: JDF F24-4 |
| "finishing-template.jdf-f24-4" = "JDF F24-4"; |
| // TRANSLATORS: JDF F24-5 |
| "finishing-template.jdf-f24-5" = "JDF F24-5"; |
| // TRANSLATORS: JDF F24-6 |
| "finishing-template.jdf-f24-6" = "JDF F24-6"; |
| // TRANSLATORS: JDF F24-7 |
| "finishing-template.jdf-f24-7" = "JDF F24-7"; |
| // TRANSLATORS: JDF F24-8 |
| "finishing-template.jdf-f24-8" = "JDF F24-8"; |
| // TRANSLATORS: JDF F24-9 |
| "finishing-template.jdf-f24-9" = "JDF F24-9"; |
| // TRANSLATORS: JDF F28-1 |
| "finishing-template.jdf-f28-1" = "JDF F28-1"; |
| // TRANSLATORS: JDF F32-1 |
| "finishing-template.jdf-f32-1" = "JDF F32-1"; |
| // TRANSLATORS: JDF F32-2 |
| "finishing-template.jdf-f32-2" = "JDF F32-2"; |
| // TRANSLATORS: JDF F32-3 |
| "finishing-template.jdf-f32-3" = "JDF F32-3"; |
| // TRANSLATORS: JDF F32-4 |
| "finishing-template.jdf-f32-4" = "JDF F32-4"; |
| // TRANSLATORS: JDF F32-5 |
| "finishing-template.jdf-f32-5" = "JDF F32-5"; |
| // TRANSLATORS: JDF F32-6 |
| "finishing-template.jdf-f32-6" = "JDF F32-6"; |
| // TRANSLATORS: JDF F32-7 |
| "finishing-template.jdf-f32-7" = "JDF F32-7"; |
| // TRANSLATORS: JDF F32-8 |
| "finishing-template.jdf-f32-8" = "JDF F32-8"; |
| // TRANSLATORS: JDF F32-9 |
| "finishing-template.jdf-f32-9" = "JDF F32-9"; |
| // TRANSLATORS: JDF F36-1 |
| "finishing-template.jdf-f36-1" = "JDF F36-1"; |
| // TRANSLATORS: JDF F36-2 |
| "finishing-template.jdf-f36-2" = "JDF F36-2"; |
| // TRANSLATORS: JDF F4-1 |
| "finishing-template.jdf-f4-1" = "JDF F4-1"; |
| // TRANSLATORS: JDF F4-2 |
| "finishing-template.jdf-f4-2" = "JDF F4-2"; |
| // TRANSLATORS: JDF F40-1 |
| "finishing-template.jdf-f40-1" = "JDF F40-1"; |
| // TRANSLATORS: JDF F48-1 |
| "finishing-template.jdf-f48-1" = "JDF F48-1"; |
| // TRANSLATORS: JDF F48-2 |
| "finishing-template.jdf-f48-2" = "JDF F48-2"; |
| // TRANSLATORS: JDF F6-1 |
| "finishing-template.jdf-f6-1" = "JDF F6-1"; |
| // TRANSLATORS: JDF F6-2 |
| "finishing-template.jdf-f6-2" = "JDF F6-2"; |
| // TRANSLATORS: JDF F6-3 |
| "finishing-template.jdf-f6-3" = "JDF F6-3"; |
| // TRANSLATORS: JDF F6-4 |
| "finishing-template.jdf-f6-4" = "JDF F6-4"; |
| // TRANSLATORS: JDF F6-5 |
| "finishing-template.jdf-f6-5" = "JDF F6-5"; |
| // TRANSLATORS: JDF F6-6 |
| "finishing-template.jdf-f6-6" = "JDF F6-6"; |
| // TRANSLATORS: JDF F6-7 |
| "finishing-template.jdf-f6-7" = "JDF F6-7"; |
| // TRANSLATORS: JDF F6-8 |
| "finishing-template.jdf-f6-8" = "JDF F6-8"; |
| // TRANSLATORS: JDF F64-1 |
| "finishing-template.jdf-f64-1" = "JDF F64-1"; |
| // TRANSLATORS: JDF F64-2 |
| "finishing-template.jdf-f64-2" = "JDF F64-2"; |
| // TRANSLATORS: JDF F8-1 |
| "finishing-template.jdf-f8-1" = "JDF F8-1"; |
| // TRANSLATORS: JDF F8-2 |
| "finishing-template.jdf-f8-2" = "JDF F8-2"; |
| // TRANSLATORS: JDF F8-3 |
| "finishing-template.jdf-f8-3" = "JDF F8-3"; |
| // TRANSLATORS: JDF F8-4 |
| "finishing-template.jdf-f8-4" = "JDF F8-4"; |
| // TRANSLATORS: JDF F8-5 |
| "finishing-template.jdf-f8-5" = "JDF F8-5"; |
| // TRANSLATORS: JDF F8-6 |
| "finishing-template.jdf-f8-6" = "JDF F8-6"; |
| // TRANSLATORS: JDF F8-7 |
| "finishing-template.jdf-f8-7" = "JDF F8-7"; |
| // TRANSLATORS: Jog Offset |
| "finishing-template.jog-offset" = "Jog Offset"; |
| // TRANSLATORS: Laminate |
| "finishing-template.laminate" = "Laminate"; |
| // TRANSLATORS: Punch |
| "finishing-template.punch" = "Punch"; |
| // TRANSLATORS: Punch Bottom Left |
| "finishing-template.punch-bottom-left" = "Punch Bottom Left"; |
| // TRANSLATORS: Punch Bottom Right |
| "finishing-template.punch-bottom-right" = "Punch Bottom Right"; |
| // TRANSLATORS: 2-hole Punch Bottom |
| "finishing-template.punch-dual-bottom" = "2-hole Punch Bottom"; |
| // TRANSLATORS: 2-hole Punch Left |
| "finishing-template.punch-dual-left" = "2-hole Punch Left"; |
| // TRANSLATORS: 2-hole Punch Right |
| "finishing-template.punch-dual-right" = "2-hole Punch Right"; |
| // TRANSLATORS: 2-hole Punch Top |
| "finishing-template.punch-dual-top" = "2-hole Punch Top"; |
| // TRANSLATORS: Multi-hole Punch Bottom |
| "finishing-template.punch-multiple-bottom" = "Multi-hole Punch Bottom"; |
| // TRANSLATORS: Multi-hole Punch Left |
| "finishing-template.punch-multiple-left" = "Multi-hole Punch Left"; |
| // TRANSLATORS: Multi-hole Punch Right |
| "finishing-template.punch-multiple-right" = "Multi-hole Punch Right"; |
| // TRANSLATORS: Multi-hole Punch Top |
| "finishing-template.punch-multiple-top" = "Multi-hole Punch Top"; |
| // TRANSLATORS: 4-hole Punch Bottom |
| "finishing-template.punch-quad-bottom" = "4-hole Punch Bottom"; |
| // TRANSLATORS: 4-hole Punch Left |
| "finishing-template.punch-quad-left" = "4-hole Punch Left"; |
| // TRANSLATORS: 4-hole Punch Right |
| "finishing-template.punch-quad-right" = "4-hole Punch Right"; |
| // TRANSLATORS: 4-hole Punch Top |
| "finishing-template.punch-quad-top" = "4-hole Punch Top"; |
| // TRANSLATORS: Punch Top Left |
| "finishing-template.punch-top-left" = "Punch Top Left"; |
| // TRANSLATORS: Punch Top Right |
| "finishing-template.punch-top-right" = "Punch Top Right"; |
| // TRANSLATORS: 3-hole Punch Bottom |
| "finishing-template.punch-triple-bottom" = "3-hole Punch Bottom"; |
| // TRANSLATORS: 3-hole Punch Left |
| "finishing-template.punch-triple-left" = "3-hole Punch Left"; |
| // TRANSLATORS: 3-hole Punch Right |
| "finishing-template.punch-triple-right" = "3-hole Punch Right"; |
| // TRANSLATORS: 3-hole Punch Top |
| "finishing-template.punch-triple-top" = "3-hole Punch Top"; |
| // TRANSLATORS: Saddle Stitch |
| "finishing-template.saddle-stitch" = "Saddle Stitch"; |
| // TRANSLATORS: Staple |
| "finishing-template.staple" = "Staple"; |
| // TRANSLATORS: Staple Bottom Left |
| "finishing-template.staple-bottom-left" = "Staple Bottom Left"; |
| // TRANSLATORS: Staple Bottom Right |
| "finishing-template.staple-bottom-right" = "Staple Bottom Right"; |
| // TRANSLATORS: 2 Staples on Bottom |
| "finishing-template.staple-dual-bottom" = "2 Staples on Bottom"; |
| // TRANSLATORS: 2 Staples on Left |
| "finishing-template.staple-dual-left" = "2 Staples on Left"; |
| // TRANSLATORS: 2 Staples on Right |
| "finishing-template.staple-dual-right" = "2 Staples on Right"; |
| // TRANSLATORS: 2 Staples on Top |
| "finishing-template.staple-dual-top" = "2 Staples on Top"; |
| // TRANSLATORS: Staple Top Left |
| "finishing-template.staple-top-left" = "Staple Top Left"; |
| // TRANSLATORS: Staple Top Right |
| "finishing-template.staple-top-right" = "Staple Top Right"; |
| // TRANSLATORS: 3 Staples on Bottom |
| "finishing-template.staple-triple-bottom" = "3 Staples on Bottom"; |
| // TRANSLATORS: 3 Staples on Left |
| "finishing-template.staple-triple-left" = "3 Staples on Left"; |
| // TRANSLATORS: 3 Staples on Right |
| "finishing-template.staple-triple-right" = "3 Staples on Right"; |
| // TRANSLATORS: 3 Staples on Top |
| "finishing-template.staple-triple-top" = "3 Staples on Top"; |
| // TRANSLATORS: Trim |
| "finishing-template.trim" = "Trim"; |
| // TRANSLATORS: Trim After Every Set |
| "finishing-template.trim-after-copies" = "Trim After Every Set"; |
| // TRANSLATORS: Trim After Every Document |
| "finishing-template.trim-after-documents" = "Trim After Every Document"; |
| // TRANSLATORS: Trim After Job |
| "finishing-template.trim-after-job" = "Trim After Job"; |
| // TRANSLATORS: Trim After Every Page |
| "finishing-template.trim-after-pages" = "Trim After Every Page"; |
| // TRANSLATORS: Trim After Every Set |
| "finishing-template.trim-after-sets" = "Trim After Every Set"; |
| // TRANSLATORS: Trim After Every Page |
| "finishing-template.trim-after-sheets" = "Trim After Every Page"; |
| // TRANSLATORS: Finishings |
| "finishings" = "Finishings"; |
| // TRANSLATORS: Finishings |
| "finishings-col" = "Finishings"; |
| // TRANSLATORS: Fold |
| "finishings.10" = "Fold"; |
| // TRANSLATORS: Z Fold |
| "finishings.100" = "Z Fold"; |
| // TRANSLATORS: Engineering Z Fold |
| "finishings.101" = "Engineering Z Fold"; |
| // TRANSLATORS: Trim |
| "finishings.11" = "Trim"; |
| // TRANSLATORS: Bale |
| "finishings.12" = "Bale"; |
| // TRANSLATORS: Booklet Maker |
| "finishings.13" = "Booklet Maker"; |
| // TRANSLATORS: Jog Offset |
| "finishings.14" = "Jog Offset"; |
| // TRANSLATORS: Coat |
| "finishings.15" = "Coat"; |
| // TRANSLATORS: Laminate |
| "finishings.16" = "Laminate"; |
| // TRANSLATORS: Staple Top Left |
| "finishings.20" = "Staple Top Left"; |
| // TRANSLATORS: Staple Bottom Left |
| "finishings.21" = "Staple Bottom Left"; |
| // TRANSLATORS: Staple Top Right |
| "finishings.22" = "Staple Top Right"; |
| // TRANSLATORS: Staple Bottom Right |
| "finishings.23" = "Staple Bottom Right"; |
| // TRANSLATORS: Edge Stitch Left |
| "finishings.24" = "Edge Stitch Left"; |
| // TRANSLATORS: Edge Stitch Top |
| "finishings.25" = "Edge Stitch Top"; |
| // TRANSLATORS: Edge Stitch Right |
| "finishings.26" = "Edge Stitch Right"; |
| // TRANSLATORS: Edge Stitch Bottom |
| "finishings.27" = "Edge Stitch Bottom"; |
| // TRANSLATORS: 2 Staples on Left |
| "finishings.28" = "2 Staples on Left"; |
| // TRANSLATORS: 2 Staples on Top |
| "finishings.29" = "2 Staples on Top"; |
| // TRANSLATORS: None |
| "finishings.3" = "None"; |
| // TRANSLATORS: 2 Staples on Right |
| "finishings.30" = "2 Staples on Right"; |
| // TRANSLATORS: 2 Staples on Bottom |
| "finishings.31" = "2 Staples on Bottom"; |
| // TRANSLATORS: 3 Staples on Left |
| "finishings.32" = "3 Staples on Left"; |
| // TRANSLATORS: 3 Staples on Top |
| "finishings.33" = "3 Staples on Top"; |
| // TRANSLATORS: 3 Staples on Right |
| "finishings.34" = "3 Staples on Right"; |
| // TRANSLATORS: 3 Staples on Bottom |
| "finishings.35" = "3 Staples on Bottom"; |
| // TRANSLATORS: Staple |
| "finishings.4" = "Staple"; |
| // TRANSLATORS: Punch |
| "finishings.5" = "Punch"; |
| // TRANSLATORS: Bind Left |
| "finishings.50" = "Bind Left"; |
| // TRANSLATORS: Bind Top |
| "finishings.51" = "Bind Top"; |
| // TRANSLATORS: Bind Right |
| "finishings.52" = "Bind Right"; |
| // TRANSLATORS: Bind Bottom |
| "finishings.53" = "Bind Bottom"; |
| // TRANSLATORS: Cover |
| "finishings.6" = "Cover"; |
| // TRANSLATORS: Trim Pages |
| "finishings.60" = "Trim Pages"; |
| // TRANSLATORS: Trim Documents |
| "finishings.61" = "Trim Documents"; |
| // TRANSLATORS: Trim Copies |
| "finishings.62" = "Trim Copies"; |
| // TRANSLATORS: Trim Job |
| "finishings.63" = "Trim Job"; |
| // TRANSLATORS: Bind |
| "finishings.7" = "Bind"; |
| // TRANSLATORS: Punch Top Left |
| "finishings.70" = "Punch Top Left"; |
| // TRANSLATORS: Punch Bottom Left |
| "finishings.71" = "Punch Bottom Left"; |
| // TRANSLATORS: Punch Top Right |
| "finishings.72" = "Punch Top Right"; |
| // TRANSLATORS: Punch Bottom Right |
| "finishings.73" = "Punch Bottom Right"; |
| // TRANSLATORS: 2-hole Punch Left |
| "finishings.74" = "2-hole Punch Left"; |
| // TRANSLATORS: 2-hole Punch Top |
| "finishings.75" = "2-hole Punch Top"; |
| // TRANSLATORS: 2-hole Punch Right |
| "finishings.76" = "2-hole Punch Right"; |
| // TRANSLATORS: 2-hole Punch Bottom |
| "finishings.77" = "2-hole Punch Bottom"; |
| // TRANSLATORS: 3-hole Punch Left |
| "finishings.78" = "3-hole Punch Left"; |
| // TRANSLATORS: 3-hole Punch Top |
| "finishings.79" = "3-hole Punch Top"; |
| // TRANSLATORS: Saddle Stitch |
| "finishings.8" = "Saddle Stitch"; |
| // TRANSLATORS: 3-hole Punch Right |
| "finishings.80" = "3-hole Punch Right"; |
| // TRANSLATORS: 3-hole Punch Bottom |
| "finishings.81" = "3-hole Punch Bottom"; |
| // TRANSLATORS: 4-hole Punch Left |
| "finishings.82" = "4-hole Punch Left"; |
| // TRANSLATORS: 4-hole Punch Top |
| "finishings.83" = "4-hole Punch Top"; |
| // TRANSLATORS: 4-hole Punch Right |
| "finishings.84" = "4-hole Punch Right"; |
| // TRANSLATORS: 4-hole Punch Bottom |
| "finishings.85" = "4-hole Punch Bottom"; |
| // TRANSLATORS: Multi-hole Punch Left |
| "finishings.86" = "Multi-hole Punch Left"; |
| // TRANSLATORS: Multi-hole Punch Top |
| "finishings.87" = "Multi-hole Punch Top"; |
| // TRANSLATORS: Multi-hole Punch Right |
| "finishings.88" = "Multi-hole Punch Right"; |
| // TRANSLATORS: Multi-hole Punch Bottom |
| "finishings.89" = "Multi-hole Punch Bottom"; |
| // TRANSLATORS: Edge Stitch |
| "finishings.9" = "Edge Stitch"; |
| // TRANSLATORS: Accordion Fold |
| "finishings.90" = "Accordion Fold"; |
| // TRANSLATORS: Double Gate Fold |
| "finishings.91" = "Double Gate Fold"; |
| // TRANSLATORS: Gate Fold |
| "finishings.92" = "Gate Fold"; |
| // TRANSLATORS: Half Fold |
| "finishings.93" = "Half Fold"; |
| // TRANSLATORS: Half Z Fold |
| "finishings.94" = "Half Z Fold"; |
| // TRANSLATORS: Left Gate Fold |
| "finishings.95" = "Left Gate Fold"; |
| // TRANSLATORS: Letter Fold |
| "finishings.96" = "Letter Fold"; |
| // TRANSLATORS: Parallel Fold |
| "finishings.97" = "Parallel Fold"; |
| // TRANSLATORS: Poster Fold |
| "finishings.98" = "Poster Fold"; |
| // TRANSLATORS: Right Gate Fold |
| "finishings.99" = "Right Gate Fold"; |
| // TRANSLATORS: Fold |
| "folding" = "Fold"; |
| // TRANSLATORS: Fold Direction |
| "folding-direction" = "Fold Direction"; |
| // TRANSLATORS: Inward |
| "folding-direction.inward" = "Inward"; |
| // TRANSLATORS: Outward |
| "folding-direction.outward" = "Outward"; |
| // TRANSLATORS: Fold Position |
| "folding-offset" = "Fold Position"; |
| // TRANSLATORS: Fold Edge |
| "folding-reference-edge" = "Fold Edge"; |
| // TRANSLATORS: Bottom |
| "folding-reference-edge.bottom" = "Bottom"; |
| // TRANSLATORS: Left |
| "folding-reference-edge.left" = "Left"; |
| // TRANSLATORS: Right |
| "folding-reference-edge.right" = "Right"; |
| // TRANSLATORS: Top |
| "folding-reference-edge.top" = "Top"; |
| // TRANSLATORS: Font Name |
| "font-name-requested" = "Font Name"; |
| // TRANSLATORS: Font Size |
| "font-size-requested" = "Font Size"; |
| // TRANSLATORS: Force Front Side |
| "force-front-side" = "Force Front Side"; |
| // TRANSLATORS: From Name |
| "from-name" = "From Name"; |
| "held" = "held"; |
| "help\t\tGet help on commands." = "help\t\tGet help on commands."; |
| "idle" = "idle"; |
| // TRANSLATORS: Imposition Template |
| "imposition-template" = "Imposition Template"; |
| // TRANSLATORS: None |
| "imposition-template.none" = "None"; |
| // TRANSLATORS: Signature |
| "imposition-template.signature" = "Signature"; |
| // TRANSLATORS: Insert Page Number |
| "insert-after-page-number" = "Insert Page Number"; |
| // TRANSLATORS: Insert Count |
| "insert-count" = "Insert Count"; |
| // TRANSLATORS: Insert Sheet |
| "insert-sheet" = "Insert Sheet"; |
| "ippeveprinter: Unable to open \"%s\": %s on line %d." = "ippeveprinter: Unable to open “%s”: %s on line %d."; |
| "ippfind: Bad regular expression: %s" = "ippfind: Bad regular expression: %s"; |
| "ippfind: Cannot use --and after --or." = "ippfind: Cannot use --and after --or."; |
| "ippfind: Expected key name after %s." = "ippfind: Expected key name after %s."; |
| "ippfind: Expected port range after %s." = "ippfind: Expected port range after %s."; |
| "ippfind: Expected program after %s." = "ippfind: Expected program after %s."; |
| "ippfind: Expected semi-colon after %s." = "ippfind: Expected semi-colon after %s."; |
| "ippfind: Missing close brace in substitution." = "ippfind: Missing close brace in substitution."; |
| "ippfind: Missing close parenthesis." = "ippfind: Missing close parenthesis."; |
| "ippfind: Missing expression before \"--and\"." = "ippfind: Missing expression before “--and”."; |
| "ippfind: Missing expression before \"--or\"." = "ippfind: Missing expression before “--or”."; |
| "ippfind: Missing key name after %s." = "ippfind: Missing key name after %s."; |
| "ippfind: Missing name after %s." = "ippfind: Missing name after %s."; |
| "ippfind: Missing open parenthesis." = "ippfind: Missing open parenthesis."; |
| "ippfind: Missing program after %s." = "ippfind: Missing program after %s."; |
| "ippfind: Missing regular expression after %s." = "ippfind: Missing regular expression after %s."; |
| "ippfind: Missing semi-colon after %s." = "ippfind: Missing semi-colon after %s."; |
| "ippfind: Out of memory." = "ippfind: Out of memory."; |
| "ippfind: Too many parenthesis." = "ippfind: Too many parenthesis."; |
| "ippfind: Unable to browse or resolve: %s" = "ippfind: Unable to browse or resolve: %s"; |
| "ippfind: Unable to execute \"%s\": %s" = "ippfind: Unable to execute “%s”: %s"; |
| "ippfind: Unable to use Bonjour: %s" = "ippfind: Unable to use Bonjour: %s"; |
| "ippfind: Unknown variable \"{%s}\"." = "ippfind: Unknown variable “{%s}”."; |
| "ipptool: \"-i\" and \"-n\" are incompatible with \"--ippserver\", \"-P\", and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “--ippserver”, “-P”, and “-X”."; |
| "ipptool: \"-i\" and \"-n\" are incompatible with \"-P\" and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “-P” and “-X”."; |
| "ipptool: Bad URI \"%s\"." = "ipptool: Bad URI “%s”."; |
| "ipptool: Invalid seconds for \"-i\"." = "ipptool: Invalid seconds for “-i”."; |
| "ipptool: May only specify a single URI." = "ipptool: May only specify a single URI."; |
| "ipptool: Missing count for \"-n\"." = "ipptool: Missing count for “-n”."; |
| "ipptool: Missing filename for \"--ippserver\"." = "ipptool: Missing filename for “--ippserver”."; |
| "ipptool: Missing filename for \"-f\"." = "ipptool: Missing filename for “-f”."; |
| "ipptool: Missing name=value for \"-d\"." = "ipptool: Missing name=value for “-d”."; |
| "ipptool: Missing seconds for \"-i\"." = "ipptool: Missing seconds for “-i”."; |
| "ipptool: URI required before test file." = "ipptool: URI required before test file."; |
| // TRANSLATORS: Job Account ID |
| "job-account-id" = "Job Account ID"; |
| // TRANSLATORS: Job Account Type |
| "job-account-type" = "Job Account Type"; |
| // TRANSLATORS: General |
| "job-account-type.general" = "General"; |
| // TRANSLATORS: Group |
| "job-account-type.group" = "Group"; |
| // TRANSLATORS: None |
| "job-account-type.none" = "None"; |
| // TRANSLATORS: Job Accounting Output Bin |
| "job-accounting-output-bin" = "Job Accounting Output Bin"; |
| // TRANSLATORS: Job Accounting Sheets |
| "job-accounting-sheets" = "Job Accounting Sheets"; |
| // TRANSLATORS: Type of Job Accounting Sheets |
| "job-accounting-sheets-type" = "Type of Job Accounting Sheets"; |
| // TRANSLATORS: None |
| "job-accounting-sheets-type.none" = "None"; |
| // TRANSLATORS: Standard |
| "job-accounting-sheets-type.standard" = "Standard"; |
| // TRANSLATORS: Job Accounting User ID |
| "job-accounting-user-id" = "Job Accounting User ID"; |
| // TRANSLATORS: Job Cancel After |
| "job-cancel-after" = "Cancel job after"; |
| // TRANSLATORS: Copies |
| "job-copies" = "Copies"; |
| // TRANSLATORS: Back Cover |
| "job-cover-back" = "Back Cover"; |
| // TRANSLATORS: Front Cover |
| "job-cover-front" = "Front Cover"; |
| // TRANSLATORS: Delay Output Until |
| "job-delay-output-until" = "Delay Output Until"; |
| // TRANSLATORS: Delay Output Until |
| "job-delay-output-until-time" = "Delay Output Until"; |
| // TRANSLATORS: Daytime |
| "job-delay-output-until.day-time" = "Daytime"; |
| // TRANSLATORS: Evening |
| "job-delay-output-until.evening" = "Evening"; |
| // TRANSLATORS: Released |
| "job-delay-output-until.indefinite" = "Released"; |
| // TRANSLATORS: Night |
| "job-delay-output-until.night" = "Night"; |
| // TRANSLATORS: No Delay |
| "job-delay-output-until.no-delay-output" = "No Delay"; |
| // TRANSLATORS: Second Shift |
| "job-delay-output-until.second-shift" = "Second Shift"; |
| // TRANSLATORS: Third Shift |
| "job-delay-output-until.third-shift" = "Third Shift"; |
| // TRANSLATORS: Weekend |
| "job-delay-output-until.weekend" = "Weekend"; |
| // TRANSLATORS: On Error |
| "job-error-action" = "On Error"; |
| // TRANSLATORS: Abort Job |
| "job-error-action.abort-job" = "Abort Job"; |
| // TRANSLATORS: Cancel Job |
| "job-error-action.cancel-job" = "Cancel Job"; |
| // TRANSLATORS: Continue Job |
| "job-error-action.continue-job" = "Continue Job"; |
| // TRANSLATORS: Suspend Job |
| "job-error-action.suspend-job" = "Suspend Job"; |
| // TRANSLATORS: Print Error Sheet |
| "job-error-sheet" = "Print Error Sheet"; |
| // TRANSLATORS: Type of Error Sheet |
| "job-error-sheet-type" = "Type of Error Sheet"; |
| // TRANSLATORS: None |
| "job-error-sheet-type.none" = "None"; |
| // TRANSLATORS: Standard |
| "job-error-sheet-type.standard" = "Standard"; |
| // TRANSLATORS: Print Error Sheet |
| "job-error-sheet-when" = "Print Error Sheet"; |
| // TRANSLATORS: Always |
| "job-error-sheet-when.always" = "Always"; |
| // TRANSLATORS: On Error |
| "job-error-sheet-when.on-error" = "On Error"; |
| // TRANSLATORS: Job Finishings |
| "job-finishings" = "Job Finishings"; |
| // TRANSLATORS: Hold Until |
| "job-hold-until" = "Hold Until"; |
| // TRANSLATORS: Hold Until |
| "job-hold-until-time" = "Hold Until"; |
| // TRANSLATORS: Daytime |
| "job-hold-until.day-time" = "Daytime"; |
| // TRANSLATORS: Evening |
| "job-hold-until.evening" = "Evening"; |
| // TRANSLATORS: Released |
| "job-hold-until.indefinite" = "Released"; |
| // TRANSLATORS: Night |
| "job-hold-until.night" = "Night"; |
| // TRANSLATORS: No Hold |
| "job-hold-until.no-hold" = "No Hold"; |
| // TRANSLATORS: Second Shift |
| "job-hold-until.second-shift" = "Second Shift"; |
| // TRANSLATORS: Third Shift |
| "job-hold-until.third-shift" = "Third Shift"; |
| // TRANSLATORS: Weekend |
| "job-hold-until.weekend" = "Weekend"; |
| // TRANSLATORS: Job Mandatory Attributes |
| "job-mandatory-attributes" = "Job Mandatory Attributes"; |
| // TRANSLATORS: Title |
| "job-name" = "Title"; |
| // TRANSLATORS: Job Pages |
| "job-pages" = "Job Pages"; |
| // TRANSLATORS: Job Pages |
| "job-pages-col" = "Job Pages"; |
| // TRANSLATORS: Job Phone Number |
| "job-phone-number" = "Job Phone Number"; |
| "job-printer-uri attribute missing." = "job-printer-uri attribute missing."; |
| // TRANSLATORS: Job Priority |
| "job-priority" = "Job Priority"; |
| // TRANSLATORS: Job Privacy Attributes |
| "job-privacy-attributes" = "Job Privacy Attributes"; |
| // TRANSLATORS: All |
| "job-privacy-attributes.all" = "All"; |
| // TRANSLATORS: Default |
| "job-privacy-attributes.default" = "Default"; |
| // TRANSLATORS: Job Description |
| "job-privacy-attributes.job-description" = "Job Description"; |
| // TRANSLATORS: Job Template |
| "job-privacy-attributes.job-template" = "Job Template"; |
| // TRANSLATORS: None |
| "job-privacy-attributes.none" = "None"; |
| // TRANSLATORS: Job Privacy Scope |
| "job-privacy-scope" = "Job Privacy Scope"; |
| // TRANSLATORS: All |
| "job-privacy-scope.all" = "All"; |
| // TRANSLATORS: Default |
| "job-privacy-scope.default" = "Default"; |
| // TRANSLATORS: None |
| "job-privacy-scope.none" = "None"; |
| // TRANSLATORS: Owner |
| "job-privacy-scope.owner" = "Owner"; |
| // TRANSLATORS: Job Recipient Name |
| "job-recipient-name" = "Job Recipient Name"; |
| // TRANSLATORS: Job Retain Until |
| "job-retain-until" = "Retain job until"; |
| // TRANSLATORS: Job Retain Until Interval |
| "job-retain-until-interval" = "Retain job until interval"; |
| // TRANSLATORS: Job Retain Until Time |
| "job-retain-until-time" = "Retain job until time"; |
| // TRANSLATORS: End Of Day |
| "job-retain-until.end-of-day" = "End of day"; |
| // TRANSLATORS: End Of Month |
| "job-retain-until.end-of-month" = "End of month"; |
| // TRANSLATORS: End Of Week |
| "job-retain-until.end-of-week" = "End of week"; |
| // TRANSLATORS: Indefinite |
| "job-retain-until.indefinite" = "Indefinitely"; |
| // TRANSLATORS: None |
| "job-retain-until.none" = "Never"; |
| // TRANSLATORS: Job Save Disposition |
| "job-save-disposition" = "Job Save Disposition"; |
| // TRANSLATORS: Job Sheet Message |
| "job-sheet-message" = "Job Sheet Message"; |
| // TRANSLATORS: Banner Page |
| "job-sheets" = "Banner Page"; |
| // TRANSLATORS: Banner Page |
| "job-sheets-col" = "Banner Page"; |
| // TRANSLATORS: First Page in Document |
| "job-sheets.first-print-stream-page" = "First Page in Document"; |
| // TRANSLATORS: Start and End Sheets |
| "job-sheets.job-both-sheet" = "Start and End Sheets"; |
| // TRANSLATORS: End Sheet |
| "job-sheets.job-end-sheet" = "End Sheet"; |
| // TRANSLATORS: Start Sheet |
| "job-sheets.job-start-sheet" = "Start Sheet"; |
| // TRANSLATORS: None |
| "job-sheets.none" = "None"; |
| // TRANSLATORS: Standard |
| "job-sheets.standard" = "Standard"; |
| // TRANSLATORS: Job State |
| "job-state" = "Job State"; |
| // TRANSLATORS: Job State Message |
| "job-state-message" = "Job State Message"; |
| // TRANSLATORS: Detailed Job State |
| "job-state-reasons" = "Detailed Job State"; |
| // TRANSLATORS: Stopping |
| "job-state-reasons.aborted-by-system" = "Aborted By System"; |
| // TRANSLATORS: Account Authorization Failed |
| "job-state-reasons.account-authorization-failed" = "Account Authorization Failed"; |
| // TRANSLATORS: Account Closed |
| "job-state-reasons.account-closed" = "Account Closed"; |
| // TRANSLATORS: Account Info Needed |
| "job-state-reasons.account-info-needed" = "Account Info Needed"; |
| // TRANSLATORS: Account Limit Reached |
| "job-state-reasons.account-limit-reached" = "Account Limit Reached"; |
| // TRANSLATORS: Decompression error |
| "job-state-reasons.compression-error" = "Compression Error"; |
| // TRANSLATORS: Conflicting Attributes |
| "job-state-reasons.conflicting-attributes" = "Conflicting Attributes"; |
| // TRANSLATORS: Connected To Destination |
| "job-state-reasons.connected-to-destination" = "Connected To Destination"; |
| // TRANSLATORS: Connecting To Destination |
| "job-state-reasons.connecting-to-destination" = "Connecting To Destination"; |
| // TRANSLATORS: Destination Uri Failed |
| "job-state-reasons.destination-uri-failed" = "Destination Uri Failed"; |
| // TRANSLATORS: Digital Signature Did Not Verify |
| "job-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify"; |
| // TRANSLATORS: Digital Signature Type Not Supported |
| "job-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported"; |
| // TRANSLATORS: Document Access Error |
| "job-state-reasons.document-access-error" = "Document Access Error"; |
| // TRANSLATORS: Document Format Error |
| "job-state-reasons.document-format-error" = "Document Format Error"; |
| // TRANSLATORS: Document Password Error |
| "job-state-reasons.document-password-error" = "Document Password Error"; |
| // TRANSLATORS: Document Permission Error |
| "job-state-reasons.document-permission-error" = "Document Permission Error"; |
| // TRANSLATORS: Document Security Error |
| "job-state-reasons.document-security-error" = "Document Security Error"; |
| // TRANSLATORS: Document Unprintable Error |
| "job-state-reasons.document-unprintable-error" = "Document Unprintable Error"; |
| // TRANSLATORS: Errors Detected |
| "job-state-reasons.errors-detected" = "Errors Detected"; |
| // TRANSLATORS: Canceled at printer |
| "job-state-reasons.job-canceled-at-device" = "Job Canceled At Device"; |
| // TRANSLATORS: Canceled by operator |
| "job-state-reasons.job-canceled-by-operator" = "Job Canceled By Operator"; |
| // TRANSLATORS: Canceled by user |
| "job-state-reasons.job-canceled-by-user" = "Job Canceled By User"; |
| // TRANSLATORS: |
| "job-state-reasons.job-completed-successfully" = "Job Completed Successfully"; |
| // TRANSLATORS: Completed with errors |
| "job-state-reasons.job-completed-with-errors" = "Job Completed With Errors"; |
| // TRANSLATORS: Completed with warnings |
| "job-state-reasons.job-completed-with-warnings" = "Job Completed With Warnings"; |
| // TRANSLATORS: Insufficient data |
| "job-state-reasons.job-data-insufficient" = "Job Data Insufficient"; |
| // TRANSLATORS: Job Delay Output Until Specified |
| "job-state-reasons.job-delay-output-until-specified" = "Job Delay Output Until Specified"; |
| // TRANSLATORS: Job Digital Signature Wait |
| "job-state-reasons.job-digital-signature-wait" = "Job Digital Signature Wait"; |
| // TRANSLATORS: Job Fetchable |
| "job-state-reasons.job-fetchable" = "Job Fetchable"; |
| // TRANSLATORS: Job Held For Review |
| "job-state-reasons.job-held-for-review" = "Job Held For Review"; |
| // TRANSLATORS: Job held |
| "job-state-reasons.job-hold-until-specified" = "Job Hold Until Specified"; |
| // TRANSLATORS: Incoming |
| "job-state-reasons.job-incoming" = "Job Incoming"; |
| // TRANSLATORS: Interpreting |
| "job-state-reasons.job-interpreting" = "Job Interpreting"; |
| // TRANSLATORS: Outgoing |
| "job-state-reasons.job-outgoing" = "Job Outgoing"; |
| // TRANSLATORS: Job Password Wait |
| "job-state-reasons.job-password-wait" = "Job Password Wait"; |
| // TRANSLATORS: Job Printed Successfully |
| "job-state-reasons.job-printed-successfully" = "Job Printed Successfully"; |
| // TRANSLATORS: Job Printed With Errors |
| "job-state-reasons.job-printed-with-errors" = "Job Printed With Errors"; |
| // TRANSLATORS: Job Printed With Warnings |
| "job-state-reasons.job-printed-with-warnings" = "Job Printed With Warnings"; |
| // TRANSLATORS: Printing |
| "job-state-reasons.job-printing" = "Job Printing"; |
| // TRANSLATORS: Preparing to print |
| "job-state-reasons.job-queued" = "Job Queued"; |
| // TRANSLATORS: Processing document |
| "job-state-reasons.job-queued-for-marker" = "Job Queued For Marker"; |
| // TRANSLATORS: Job Release Wait |
| "job-state-reasons.job-release-wait" = "Job Release Wait"; |
| // TRANSLATORS: Restartable |
| "job-state-reasons.job-restartable" = "Job Restartable"; |
| // TRANSLATORS: Job Resuming |
| "job-state-reasons.job-resuming" = "Job Resuming"; |
| // TRANSLATORS: Job Saved Successfully |
| "job-state-reasons.job-saved-successfully" = "Job Saved Successfully"; |
| // TRANSLATORS: Job Saved With Errors |
| "job-state-reasons.job-saved-with-errors" = "Job Saved With Errors"; |
| // TRANSLATORS: Job Saved With Warnings |
| "job-state-reasons.job-saved-with-warnings" = "Job Saved With Warnings"; |
| // TRANSLATORS: Job Saving |
| "job-state-reasons.job-saving" = "Job Saving"; |
| // TRANSLATORS: Job Spooling |
| "job-state-reasons.job-spooling" = "Job Spooling"; |
| // TRANSLATORS: Job Streaming |
| "job-state-reasons.job-streaming" = "Job Streaming"; |
| // TRANSLATORS: Suspended |
| "job-state-reasons.job-suspended" = "Job Suspended"; |
| // TRANSLATORS: Job Suspended By Operator |
| "job-state-reasons.job-suspended-by-operator" = "Job Suspended By Operator"; |
| // TRANSLATORS: Job Suspended By System |
| "job-state-reasons.job-suspended-by-system" = "Job Suspended By System"; |
| // TRANSLATORS: Job Suspended By User |
| "job-state-reasons.job-suspended-by-user" = "Job Suspended By User"; |
| // TRANSLATORS: Job Suspending |
| "job-state-reasons.job-suspending" = "Job Suspending"; |
| // TRANSLATORS: Job Transferring |
| "job-state-reasons.job-transferring" = "Job Transferring"; |
| // TRANSLATORS: Transforming |
| "job-state-reasons.job-transforming" = "Job Transforming"; |
| // TRANSLATORS: None |
| "job-state-reasons.none" = "None"; |
| // TRANSLATORS: Printer offline |
| "job-state-reasons.printer-stopped" = "Printer Stopped"; |
| // TRANSLATORS: Printer partially stopped |
| "job-state-reasons.printer-stopped-partly" = "Printer Stopped Partly"; |
| // TRANSLATORS: Stopping |
| "job-state-reasons.processing-to-stop-point" = "Processing To Stop Point"; |
| // TRANSLATORS: Ready |
| "job-state-reasons.queued-in-device" = "Queued In Device"; |
| // TRANSLATORS: Resources Are Not Ready |
| "job-state-reasons.resources-are-not-ready" = "Resources Are Not Ready"; |
| // TRANSLATORS: Resources Are Not Supported |
| "job-state-reasons.resources-are-not-supported" = "Resources Are Not Supported"; |
| // TRANSLATORS: Service offline |
| "job-state-reasons.service-off-line" = "Service Off Line"; |
| // TRANSLATORS: Submission Interrupted |
| "job-state-reasons.submission-interrupted" = "Submission Interrupted"; |
| // TRANSLATORS: Unsupported Attributes Or Values |
| "job-state-reasons.unsupported-attributes-or-values" = "Unsupported Attributes Or Values"; |
| // TRANSLATORS: Unsupported Compression |
| "job-state-reasons.unsupported-compression" = "Unsupported Compression"; |
| // TRANSLATORS: Unsupported Document Format |
| "job-state-reasons.unsupported-document-format" = "Unsupported Document Format"; |
| // TRANSLATORS: Waiting For User Action |
| "job-state-reasons.waiting-for-user-action" = "Waiting For User Action"; |
| // TRANSLATORS: Warnings Detected |
| "job-state-reasons.warnings-detected" = "Warnings Detected"; |
| // TRANSLATORS: Pending |
| "job-state.3" = "Pending"; |
| // TRANSLATORS: Held |
| "job-state.4" = "Held"; |
| // TRANSLATORS: Processing |
| "job-state.5" = "Processing"; |
| // TRANSLATORS: Stopped |
| "job-state.6" = "Stopped"; |
| // TRANSLATORS: Canceled |
| "job-state.7" = "Canceled"; |
| // TRANSLATORS: Aborted |
| "job-state.8" = "Aborted"; |
| // TRANSLATORS: Completed |
| "job-state.9" = "Completed"; |
| // TRANSLATORS: Laminate Pages |
| "laminating" = "Laminate Pages"; |
| // TRANSLATORS: Laminate |
| "laminating-sides" = "Laminate"; |
| // TRANSLATORS: Back Only |
| "laminating-sides.back" = "Back Only"; |
| // TRANSLATORS: Front and Back |
| "laminating-sides.both" = "Front and Back"; |
| // TRANSLATORS: Front Only |
| "laminating-sides.front" = "Front Only"; |
| // TRANSLATORS: Type of Lamination |
| "laminating-type" = "Type of Lamination"; |
| // TRANSLATORS: Archival |
| "laminating-type.archival" = "Archival"; |
| // TRANSLATORS: Glossy |
| "laminating-type.glossy" = "Glossy"; |
| // TRANSLATORS: High Gloss |
| "laminating-type.high-gloss" = "High Gloss"; |
| // TRANSLATORS: Matte |
| "laminating-type.matte" = "Matte"; |
| // TRANSLATORS: Semi-gloss |
| "laminating-type.semi-gloss" = "Semi-gloss"; |
| // TRANSLATORS: Translucent |
| "laminating-type.translucent" = "Translucent"; |
| // TRANSLATORS: Logo |
| "logo" = "Logo"; |
| "lpadmin: Class name can only contain printable characters." = "lpadmin: Class name can only contain printable characters."; |
| "lpadmin: Expected PPD after \"-%c\" option." = "lpadmin: Expected PPD after “-%c” option."; |
| "lpadmin: Expected allow/deny:userlist after \"-u\" option." = "lpadmin: Expected allow/deny:userlist after “-u” option."; |
| "lpadmin: Expected class after \"-r\" option." = "lpadmin: Expected class after “-r” option."; |
| "lpadmin: Expected class name after \"-c\" option." = "lpadmin: Expected class name after “-c” option."; |
| "lpadmin: Expected description after \"-D\" option." = "lpadmin: Expected description after “-D” option."; |
| "lpadmin: Expected device URI after \"-v\" option." = "lpadmin: Expected device URI after “-v” option."; |
| "lpadmin: Expected file type(s) after \"-I\" option." = "lpadmin: Expected file type(s) after “-I” option."; |
| "lpadmin: Expected hostname after \"-h\" option." = "lpadmin: Expected hostname after “-h” option."; |
| "lpadmin: Expected location after \"-L\" option." = "lpadmin: Expected location after “-L” option."; |
| "lpadmin: Expected model after \"-m\" option." = "lpadmin: Expected model after “-m” option."; |
| "lpadmin: Expected name after \"-R\" option." = "lpadmin: Expected name after “-R” option."; |
| "lpadmin: Expected name=value after \"-o\" option." = "lpadmin: Expected name=value after “-o” option."; |
| "lpadmin: Expected printer after \"-p\" option." = "lpadmin: Expected printer after “-p” option."; |
| "lpadmin: Expected printer name after \"-d\" option." = "lpadmin: Expected printer name after “-d” option."; |
| "lpadmin: Expected printer or class after \"-x\" option." = "lpadmin: Expected printer or class after “-x” option."; |
| "lpadmin: No member names were seen." = "lpadmin: No member names were seen."; |
| "lpadmin: Printer %s is already a member of class %s." = "lpadmin: Printer %s is already a member of class %s."; |
| "lpadmin: Printer %s is not a member of class %s." = "lpadmin: Printer %s is not a member of class %s."; |
| "lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS." = "lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS."; |
| "lpadmin: Printer name can only contain printable characters." = "lpadmin: Printer name can only contain printable characters."; |
| "lpadmin: Raw queues are deprecated and will stop working in a future version of CUPS." = "lpadmin: Raw queues are deprecated and will stop working in a future version of CUPS."; |
| "lpadmin: Raw queues are no longer supported on macOS." = "lpadmin: Raw queues are no longer supported on macOS."; |
| "lpadmin: System V interface scripts are no longer supported for security reasons." = "lpadmin: System V interface scripts are no longer supported for security reasons."; |
| "lpadmin: Unable to add a printer to the class:\n You must specify a printer name first." = "lpadmin: Unable to add a printer to the class:\n You must specify a printer name first."; |
| "lpadmin: Unable to connect to server: %s" = "lpadmin: Unable to connect to server: %s"; |
| "lpadmin: Unable to create temporary file" = "lpadmin: Unable to create temporary file"; |
| "lpadmin: Unable to delete option:\n You must specify a printer name first." = "lpadmin: Unable to delete option:\n You must specify a printer name first."; |
| "lpadmin: Unable to open PPD \"%s\": %s" = "lpadmin: Unable to open PPD “%s”: %s"; |
| "lpadmin: Unable to open PPD \"%s\": %s on line %d." = "lpadmin: Unable to open PPD “%s”: %s on line %d."; |
| "lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first." = "lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first."; |
| "lpadmin: Unable to set the printer options:\n You must specify a printer name first." = "lpadmin: Unable to set the printer options:\n You must specify a printer name first."; |
| "lpadmin: Unknown allow/deny option \"%s\"." = "lpadmin: Unknown allow/deny option “%s”."; |
| "lpadmin: Unknown argument \"%s\"." = "lpadmin: Unknown argument “%s”."; |
| "lpadmin: Unknown option \"%c\"." = "lpadmin: Unknown option “%c”."; |
| "lpadmin: Use the 'everywhere' model for shared printers." = "lpadmin: Use the ‘everywhere’ model for shared printers."; |
| "lpadmin: Warning - content type list ignored." = "lpadmin: Warning - content type list ignored."; |
| "lpc> " = "lpc> "; |
| "lpinfo: Expected 1284 device ID string after \"--device-id\"." = "lpinfo: Expected 1284 device ID string after “--device-id”."; |
| "lpinfo: Expected language after \"--language\"." = "lpinfo: Expected language after “--language”."; |
| "lpinfo: Expected make and model after \"--make-and-model\"." = "lpinfo: Expected make and model after “--make-and-model”."; |
| "lpinfo: Expected product string after \"--product\"." = "lpinfo: Expected product string after “--product”."; |
| "lpinfo: Expected scheme list after \"--exclude-schemes\"." = "lpinfo: Expected scheme list after “--exclude-schemes”."; |
| "lpinfo: Expected scheme list after \"--include-schemes\"." = "lpinfo: Expected scheme list after “--include-schemes”."; |
| "lpinfo: Expected timeout after \"--timeout\"." = "lpinfo: Expected timeout after “--timeout”."; |
| "lpmove: Unable to connect to server: %s" = "lpmove: Unable to connect to server: %s"; |
| "lpmove: Unknown argument \"%s\"." = "lpmove: Unknown argument “%s”."; |
| "lpoptions: No printers." = "lpoptions: No printers."; |
| "lpoptions: Unable to add printer or instance: %s" = "lpoptions: Unable to add printer or instance: %s"; |
| "lpoptions: Unable to get PPD file for %s: %s" = "lpoptions: Unable to get PPD file for %s: %s"; |
| "lpoptions: Unable to open PPD file for %s." = "lpoptions: Unable to open PPD file for %s."; |
| "lpoptions: Unknown printer or class." = "lpoptions: Unknown printer or class."; |
| "lpstat: error - %s environment variable names non-existent destination \"%s\"." = "lpstat: error - %s environment variable names non-existent destination \"%s\"."; |
| // TRANSLATORS: Amount of Material |
| "material-amount" = "Amount of Material"; |
| // TRANSLATORS: Amount Units |
| "material-amount-units" = "Amount Units"; |
| // TRANSLATORS: Grams |
| "material-amount-units.g" = "Grams"; |
| // TRANSLATORS: Kilograms |
| "material-amount-units.kg" = "Kilograms"; |
| // TRANSLATORS: Liters |
| "material-amount-units.l" = "Liters"; |
| // TRANSLATORS: Meters |
| "material-amount-units.m" = "Meters"; |
| // TRANSLATORS: Milliliters |
| "material-amount-units.ml" = "Milliliters"; |
| // TRANSLATORS: Millimeters |
| "material-amount-units.mm" = "Millimeters"; |
| // TRANSLATORS: Material Color |
| "material-color" = "Material Color"; |
| // TRANSLATORS: Material Diameter |
| "material-diameter" = "Material Diameter"; |
| // TRANSLATORS: Material Diameter Tolerance |
| "material-diameter-tolerance" = "Material Diameter Tolerance"; |
| // TRANSLATORS: Material Fill Density |
| "material-fill-density" = "Material Fill Density"; |
| // TRANSLATORS: Material Name |
| "material-name" = "Material Name"; |
| // TRANSLATORS: Material Nozzle Diameter |
| "material-nozzle-diameter" = "Material Nozzle Diameter"; |
| // TRANSLATORS: Use Material For |
| "material-purpose" = "Use Material For"; |
| // TRANSLATORS: Everything |
| "material-purpose.all" = "Everything"; |
| // TRANSLATORS: Base |
| "material-purpose.base" = "Base"; |
| // TRANSLATORS: In-fill |
| "material-purpose.in-fill" = "In-fill"; |
| // TRANSLATORS: Shell |
| "material-purpose.shell" = "Shell"; |
| // TRANSLATORS: Supports |
| "material-purpose.support" = "Supports"; |
| // TRANSLATORS: Feed Rate |
| "material-rate" = "Feed Rate"; |
| // TRANSLATORS: Feed Rate Units |
| "material-rate-units" = "Feed Rate Units"; |
| // TRANSLATORS: Milligrams per second |
| "material-rate-units.mg_second" = "Milligrams per second"; |
| // TRANSLATORS: Milliliters per second |
| "material-rate-units.ml_second" = "Milliliters per second"; |
| // TRANSLATORS: Millimeters per second |
| "material-rate-units.mm_second" = "Millimeters per second"; |
| // TRANSLATORS: Material Retraction |
| "material-retraction" = "Material Retraction"; |
| // TRANSLATORS: Material Shell Thickness |
| "material-shell-thickness" = "Material Shell Thickness"; |
| // TRANSLATORS: Material Temperature |
| "material-temperature" = "Material Temperature"; |
| // TRANSLATORS: Material Type |
| "material-type" = "Material Type"; |
| // TRANSLATORS: ABS |
| "material-type.abs" = "ABS"; |
| // TRANSLATORS: Carbon Fiber ABS |
| "material-type.abs-carbon-fiber" = "Carbon Fiber ABS"; |
| // TRANSLATORS: Carbon Nanotube ABS |
| "material-type.abs-carbon-nanotube" = "Carbon Nanotube ABS"; |
| // TRANSLATORS: Chocolate |
| "material-type.chocolate" = "Chocolate"; |
| // TRANSLATORS: Gold |
| "material-type.gold" = "Gold"; |
| // TRANSLATORS: Nylon |
| "material-type.nylon" = "Nylon"; |
| // TRANSLATORS: Pet |
| "material-type.pet" = "Pet"; |
| // TRANSLATORS: Photopolymer |
| "material-type.photopolymer" = "Photopolymer"; |
| // TRANSLATORS: PLA |
| "material-type.pla" = "PLA"; |
| // TRANSLATORS: Conductive PLA |
| "material-type.pla-conductive" = "Conductive PLA"; |
| // TRANSLATORS: Pla Dissolvable |
| "material-type.pla-dissolvable" = "Pla Dissolvable"; |
| // TRANSLATORS: Flexible PLA |
| "material-type.pla-flexible" = "Flexible PLA"; |
| // TRANSLATORS: Magnetic PLA |
| "material-type.pla-magnetic" = "Magnetic PLA"; |
| // TRANSLATORS: Steel PLA |
| "material-type.pla-steel" = "Steel PLA"; |
| // TRANSLATORS: Stone PLA |
| "material-type.pla-stone" = "Stone PLA"; |
| // TRANSLATORS: Wood PLA |
| "material-type.pla-wood" = "Wood PLA"; |
| // TRANSLATORS: Polycarbonate |
| "material-type.polycarbonate" = "Polycarbonate"; |
| // TRANSLATORS: Dissolvable PVA |
| "material-type.pva-dissolvable" = "Dissolvable PVA"; |
| // TRANSLATORS: Silver |
| "material-type.silver" = "Silver"; |
| // TRANSLATORS: Titanium |
| "material-type.titanium" = "Titanium"; |
| // TRANSLATORS: Wax |
| "material-type.wax" = "Wax"; |
| // TRANSLATORS: Materials |
| "materials-col" = "Materials"; |
| // TRANSLATORS: Media |
| "media" = "Media"; |
| // TRANSLATORS: Back Coating of Media |
| "media-back-coating" = "Back Coating of Media"; |
| // TRANSLATORS: Glossy |
| "media-back-coating.glossy" = "Glossy"; |
| // TRANSLATORS: High Gloss |
| "media-back-coating.high-gloss" = "High Gloss"; |
| // TRANSLATORS: Matte |
| "media-back-coating.matte" = "Matte"; |
| // TRANSLATORS: None |
| "media-back-coating.none" = "None"; |
| // TRANSLATORS: Satin |
| "media-back-coating.satin" = "Satin"; |
| // TRANSLATORS: Semi-gloss |
| "media-back-coating.semi-gloss" = "Semi-gloss"; |
| // TRANSLATORS: Media Bottom Margin |
| "media-bottom-margin" = "Media Bottom Margin"; |
| // TRANSLATORS: Media |
| "media-col" = "Media"; |
| // TRANSLATORS: Media Color |
| "media-color" = "Media Color"; |
| // TRANSLATORS: Black |
| "media-color.black" = "Black"; |
| // TRANSLATORS: Blue |
| "media-color.blue" = "Blue"; |
| // TRANSLATORS: Brown |
| "media-color.brown" = "Brown"; |
| // TRANSLATORS: Buff |
| "media-color.buff" = "Buff"; |
| // TRANSLATORS: Clear Black |
| "media-color.clear-black" = "Clear Black"; |
| // TRANSLATORS: Clear Blue |
| "media-color.clear-blue" = "Clear Blue"; |
| // TRANSLATORS: Clear Brown |
| "media-color.clear-brown" = "Clear Brown"; |
| // TRANSLATORS: Clear Buff |
| "media-color.clear-buff" = "Clear Buff"; |
| // TRANSLATORS: Clear Cyan |
| "media-color.clear-cyan" = "Clear Cyan"; |
| // TRANSLATORS: Clear Gold |
| "media-color.clear-gold" = "Clear Gold"; |
| // TRANSLATORS: Clear Goldenrod |
| "media-color.clear-goldenrod" = "Clear Goldenrod"; |
| // TRANSLATORS: Clear Gray |
| "media-color.clear-gray" = "Clear Gray"; |
| // TRANSLATORS: Clear Green |
| "media-color.clear-green" = "Clear Green"; |
| // TRANSLATORS: Clear Ivory |
| "media-color.clear-ivory" = "Clear Ivory"; |
| // TRANSLATORS: Clear Magenta |
| "media-color.clear-magenta" = "Clear Magenta"; |
| // TRANSLATORS: Clear Multi Color |
| "media-color.clear-multi-color" = "Clear Multi Color"; |
| // TRANSLATORS: Clear Mustard |
| "media-color.clear-mustard" = "Clear Mustard"; |
| // TRANSLATORS: Clear Orange |
| "media-color.clear-orange" = "Clear Orange"; |
| // TRANSLATORS: Clear Pink |
| "media-color.clear-pink" = "Clear Pink"; |
| // TRANSLATORS: Clear Red |
| "media-color.clear-red" = "Clear Red"; |
| // TRANSLATORS: Clear Silver |
| "media-color.clear-silver" = "Clear Silver"; |
| // TRANSLATORS: Clear Turquoise |
| "media-color.clear-turquoise" = "Clear Turquoise"; |
| // TRANSLATORS: Clear Violet |
| "media-color.clear-violet" = "Clear Violet"; |
| // TRANSLATORS: Clear White |
| "media-color.clear-white" = "Clear White"; |
| // TRANSLATORS: Clear Yellow |
| "media-color.clear-yellow" = "Clear Yellow"; |
| // TRANSLATORS: Cyan |
| "media-color.cyan" = "Cyan"; |
| // TRANSLATORS: Dark Blue |
| "media-color.dark-blue" = "Dark Blue"; |
| // TRANSLATORS: Dark Brown |
| "media-color.dark-brown" = "Dark Brown"; |
| // TRANSLATORS: Dark Buff |
| "media-color.dark-buff" = "Dark Buff"; |
| // TRANSLATORS: Dark Cyan |
| "media-color.dark-cyan" = "Dark Cyan"; |
| // TRANSLATORS: Dark Gold |
| "media-color.dark-gold" = "Dark Gold"; |
| // TRANSLATORS: Dark Goldenrod |
| "media-color.dark-goldenrod" = "Dark Goldenrod"; |
| // TRANSLATORS: Dark Gray |
| "media-color.dark-gray" = "Dark Gray"; |
| // TRANSLATORS: Dark Green |
| "media-color.dark-green" = "Dark Green"; |
| // TRANSLATORS: Dark Ivory |
| "media-color.dark-ivory" = "Dark Ivory"; |
| // TRANSLATORS: Dark Magenta |
| "media-color.dark-magenta" = "Dark Magenta"; |
| // TRANSLATORS: Dark Mustard |
| "media-color.dark-mustard" = "Dark Mustard"; |
| // TRANSLATORS: Dark Orange |
| "media-color.dark-orange" = "Dark Orange"; |
| // TRANSLATORS: Dark Pink |
| "media-color.dark-pink" = "Dark Pink"; |
| // TRANSLATORS: Dark Red |
| "media-color.dark-red" = "Dark Red"; |
| // TRANSLATORS: Dark Silver |
| "media-color.dark-silver" = "Dark Silver"; |
| // TRANSLATORS: Dark Turquoise |
| "media-color.dark-turquoise" = "Dark Turquoise"; |
| // TRANSLATORS: Dark Violet |
| "media-color.dark-violet" = "Dark Violet"; |
| // TRANSLATORS: Dark Yellow |
| "media-color.dark-yellow" = "Dark Yellow"; |
| // TRANSLATORS: Gold |
| "media-color.gold" = "Gold"; |
| // TRANSLATORS: Goldenrod |
| "media-color.goldenrod" = "Goldenrod"; |
| // TRANSLATORS: Gray |
| "media-color.gray" = "Gray"; |
| // TRANSLATORS: Green |
| "media-color.green" = "Green"; |
| // TRANSLATORS: Ivory |
| "media-color.ivory" = "Ivory"; |
| // TRANSLATORS: Light Black |
| "media-color.light-black" = "Light Black"; |
| // TRANSLATORS: Light Blue |
| "media-color.light-blue" = "Light Blue"; |
| // TRANSLATORS: Light Brown |
| "media-color.light-brown" = "Light Brown"; |
| // TRANSLATORS: Light Buff |
| "media-color.light-buff" = "Light Buff"; |
| // TRANSLATORS: Light Cyan |
| "media-color.light-cyan" = "Light Cyan"; |
| // TRANSLATORS: Light Gold |
| "media-color.light-gold" = "Light Gold"; |
| // TRANSLATORS: Light Goldenrod |
| "media-color.light-goldenrod" = "Light Goldenrod"; |
| // TRANSLATORS: Light Gray |
| "media-color.light-gray" = "Light Gray"; |
| // TRANSLATORS: Light Green |
| "media-color.light-green" = "Light Green"; |
| // TRANSLATORS: Light Ivory |
| "media-color.light-ivory" = "Light Ivory"; |
| // TRANSLATORS: Light Magenta |
| "media-color.light-magenta" = "Light Magenta"; |
| // TRANSLATORS: Light Mustard |
| "media-color.light-mustard" = "Light Mustard"; |
| // TRANSLATORS: Light Orange |
| "media-color.light-orange" = "Light Orange"; |
| // TRANSLATORS: Light Pink |
| "media-color.light-pink" = "Light Pink"; |
| // TRANSLATORS: Light Red |
| "media-color.light-red" = "Light Red"; |
| // TRANSLATORS: Light Silver |
| "media-color.light-silver" = "Light Silver"; |
| // TRANSLATORS: Light Turquoise |
| "media-color.light-turquoise" = "Light Turquoise"; |
| // TRANSLATORS: Light Violet |
| "media-color.light-violet" = "Light Violet"; |
| // TRANSLATORS: Light Yellow |
| "media-color.light-yellow" = "Light Yellow"; |
| // TRANSLATORS: Magenta |
| "media-color.magenta" = "Magenta"; |
| // TRANSLATORS: Multi-color |
| "media-color.multi-color" = "Multi-color"; |
| // TRANSLATORS: Mustard |
| "media-color.mustard" = "Mustard"; |
| // TRANSLATORS: No Color |
| "media-color.no-color" = "No Color"; |
| // TRANSLATORS: Orange |
| "media-color.orange" = "Orange"; |
| // TRANSLATORS: Pink |
| "media-color.pink" = "Pink"; |
| // TRANSLATORS: Red |
| "media-color.red" = "Red"; |
| // TRANSLATORS: Silver |
| "media-color.silver" = "Silver"; |
| // TRANSLATORS: Turquoise |
| "media-color.turquoise" = "Turquoise"; |
| // TRANSLATORS: Violet |
| "media-color.violet" = "Violet"; |
| // TRANSLATORS: White |
| "media-color.white" = "White"; |
| // TRANSLATORS: Yellow |
| "media-color.yellow" = "Yellow"; |
| // TRANSLATORS: Front Coating of Media |
| "media-front-coating" = "Front Coating of Media"; |
| // TRANSLATORS: Media Grain |
| "media-grain" = "Media Grain"; |
| // TRANSLATORS: Cross-Feed Direction |
| "media-grain.x-direction" = "Cross-Feed Direction"; |
| // TRANSLATORS: Feed Direction |
| "media-grain.y-direction" = "Feed Direction"; |
| // TRANSLATORS: Media Hole Count |
| "media-hole-count" = "Media Hole Count"; |
| // TRANSLATORS: Media Info |
| "media-info" = "Media Info"; |
| // TRANSLATORS: Force Media |
| "media-input-tray-check" = "Force Media"; |
| // TRANSLATORS: Media Left Margin |
| "media-left-margin" = "Media Left Margin"; |
| // TRANSLATORS: Pre-printed Media |
| "media-pre-printed" = "Pre-printed Media"; |
| // TRANSLATORS: Blank |
| "media-pre-printed.blank" = "Blank"; |
| // TRANSLATORS: Letterhead |
| "media-pre-printed.letter-head" = "Letterhead"; |
| // TRANSLATORS: Pre-printed |
| "media-pre-printed.pre-printed" = "Pre-printed"; |
| // TRANSLATORS: Recycled Media |
| "media-recycled" = "Recycled Media"; |
| // TRANSLATORS: None |
| "media-recycled.none" = "None"; |
| // TRANSLATORS: Standard |
| "media-recycled.standard" = "Standard"; |
| // TRANSLATORS: Media Right Margin |
| "media-right-margin" = "Media Right Margin"; |
| // TRANSLATORS: Media Dimensions |
| "media-size" = "Media Dimensions"; |
| // TRANSLATORS: Media Name |
| "media-size-name" = "Media Name"; |
| // TRANSLATORS: Media Source |
| "media-source" = "Media Source"; |
| // TRANSLATORS: Alternate |
| "media-source.alternate" = "Alternate"; |
| // TRANSLATORS: Alternate Roll |
| "media-source.alternate-roll" = "Alternate Roll"; |
| // TRANSLATORS: Automatic |
| "media-source.auto" = "Automatic"; |
| // TRANSLATORS: Bottom |
| "media-source.bottom" = "Bottom"; |
| // TRANSLATORS: By-pass Tray |
| "media-source.by-pass-tray" = "By-pass Tray"; |
| // TRANSLATORS: Center |
| "media-source.center" = "Center"; |
| // TRANSLATORS: Disc |
| "media-source.disc" = "Disc"; |
| // TRANSLATORS: Envelope |
| "media-source.envelope" = "Envelope"; |
| // TRANSLATORS: Hagaki |
| "media-source.hagaki" = "Hagaki"; |
| // TRANSLATORS: Large Capacity |
| "media-source.large-capacity" = "Large Capacity"; |
| // TRANSLATORS: Left |
| "media-source.left" = "Left"; |
| // TRANSLATORS: Main |
| "media-source.main" = "Main"; |
| // TRANSLATORS: Main Roll |
| "media-source.main-roll" = "Main Roll"; |
| // TRANSLATORS: Manual |
| "media-source.manual" = "Manual"; |
| // TRANSLATORS: Middle |
| "media-source.middle" = "Middle"; |
| // TRANSLATORS: Photo |
| "media-source.photo" = "Photo"; |
| // TRANSLATORS: Rear |
| "media-source.rear" = "Rear"; |
| // TRANSLATORS: Right |
| "media-source.right" = "Right"; |
| // TRANSLATORS: Roll 1 |
| "media-source.roll-1" = "Roll 1"; |
| // TRANSLATORS: Roll 10 |
| "media-source.roll-10" = "Roll 10"; |
| // TRANSLATORS: Roll 2 |
| "media-source.roll-2" = "Roll 2"; |
| // TRANSLATORS: Roll 3 |
| "media-source.roll-3" = "Roll 3"; |
| // TRANSLATORS: Roll 4 |
| "media-source.roll-4" = "Roll 4"; |
| // TRANSLATORS: Roll 5 |
| "media-source.roll-5" = "Roll 5"; |
| // TRANSLATORS: Roll 6 |
| "media-source.roll-6" = "Roll 6"; |
| // TRANSLATORS: Roll 7 |
| "media-source.roll-7" = "Roll 7"; |
| // TRANSLATORS: Roll 8 |
| "media-source.roll-8" = "Roll 8"; |
| // TRANSLATORS: Roll 9 |
| "media-source.roll-9" = "Roll 9"; |
| // TRANSLATORS: Side |
| "media-source.side" = "Side"; |
| // TRANSLATORS: Top |
| "media-source.top" = "Top"; |
| // TRANSLATORS: Tray 1 |
| "media-source.tray-1" = "Tray 1"; |
| // TRANSLATORS: Tray 10 |
| "media-source.tray-10" = "Tray 10"; |
| // TRANSLATORS: Tray 11 |
| "media-source.tray-11" = "Tray 11"; |
| // TRANSLATORS: Tray 12 |
| "media-source.tray-12" = "Tray 12"; |
| // TRANSLATORS: Tray 13 |
| "media-source.tray-13" = "Tray 13"; |
| // TRANSLATORS: Tray 14 |
| "media-source.tray-14" = "Tray 14"; |
| // TRANSLATORS: Tray 15 |
| "media-source.tray-15" = "Tray 15"; |
| // TRANSLATORS: Tray 16 |
| "media-source.tray-16" = "Tray 16"; |
| // TRANSLATORS: Tray 17 |
| "media-source.tray-17" = "Tray 17"; |
| // TRANSLATORS: Tray 18 |
| "media-source.tray-18" = "Tray 18"; |
| // TRANSLATORS: Tray 19 |
| "media-source.tray-19" = "Tray 19"; |
| // TRANSLATORS: Tray 2 |
| "media-source.tray-2" = "Tray 2"; |
| // TRANSLATORS: Tray 20 |
| "media-source.tray-20" = "Tray 20"; |
| // TRANSLATORS: Tray 3 |
| "media-source.tray-3" = "Tray 3"; |
| // TRANSLATORS: Tray 4 |
| "media-source.tray-4" = "Tray 4"; |
| // TRANSLATORS: Tray 5 |
| "media-source.tray-5" = "Tray 5"; |
| // TRANSLATORS: Tray 6 |
| "media-source.tray-6" = "Tray 6"; |
| // TRANSLATORS: Tray 7 |
| "media-source.tray-7" = "Tray 7"; |
| // TRANSLATORS: Tray 8 |
| "media-source.tray-8" = "Tray 8"; |
| // TRANSLATORS: Tray 9 |
| "media-source.tray-9" = "Tray 9"; |
| // TRANSLATORS: Media Thickness |
| "media-thickness" = "Media Thickness"; |
| // TRANSLATORS: Media Tooth (Texture) |
| "media-tooth" = "Media Tooth (Texture)"; |
| // TRANSLATORS: Antique |
| "media-tooth.antique" = "Antique"; |
| // TRANSLATORS: Extra Smooth |
| "media-tooth.calendared" = "Extra Smooth"; |
| // TRANSLATORS: Coarse |
| "media-tooth.coarse" = "Coarse"; |
| // TRANSLATORS: Fine |
| "media-tooth.fine" = "Fine"; |
| // TRANSLATORS: Linen |
| "media-tooth.linen" = "Linen"; |
| // TRANSLATORS: Medium |
| "media-tooth.medium" = "Medium"; |
| // TRANSLATORS: Smooth |
| "media-tooth.smooth" = "Smooth"; |
| // TRANSLATORS: Stipple |
| "media-tooth.stipple" = "Stipple"; |
| // TRANSLATORS: Rough |
| "media-tooth.uncalendared" = "Rough"; |
| // TRANSLATORS: Vellum |
| "media-tooth.vellum" = "Vellum"; |
| // TRANSLATORS: Media Top Margin |
| "media-top-margin" = "Media Top Margin"; |
| // TRANSLATORS: Media Type |
| "media-type" = "Media Type"; |
| // TRANSLATORS: Aluminum |
| "media-type.aluminum" = "Aluminum"; |
| // TRANSLATORS: Automatic |
| "media-type.auto" = "Automatic"; |
| // TRANSLATORS: Back Print Film |
| "media-type.back-print-film" = "Back Print Film"; |
| // TRANSLATORS: Cardboard |
| "media-type.cardboard" = "Cardboard"; |
| // TRANSLATORS: Cardstock |
| "media-type.cardstock" = "Cardstock"; |
| // TRANSLATORS: CD |
| "media-type.cd" = "CD"; |
| // TRANSLATORS: Photo Advanced Paper |
| "media-type.com.hp.advanced-photo" = "Photo Advanced Paper"; |
| // TRANSLATORS: Brochure Glossy Paper |
| "media-type.com.hp.brochure-glossy" = "Brochure Glossy Paper"; |
| // TRANSLATORS: Brochure Matte Paper |
| "media-type.com.hp.brochure-matte" = "Brochure Matte Paper"; |
| // TRANSLATORS: Matte Coverstock |
| "media-type.com.hp.cover-matte" = "Matte Coverstock"; |
| // TRANSLATORS: EcoSMART Lite Paper |
| "media-type.com.hp.ecosmart-lite" = "EcoSMART Lite Paper"; |
| // TRANSLATORS: Everyday Glossy Paper |
| "media-type.com.hp.everyday-glossy" = "Everyday Glossy Paper"; |
| // TRANSLATORS: Everyday Matte Paper |
| "media-type.com.hp.everyday-matte" = "Everyday Matte Paper"; |
| // TRANSLATORS: Extra Heavyweight Paper |
| "media-type.com.hp.extra-heavy" = "Extra Heavyweight Paper"; |
| // TRANSLATORS: Intermediate Paper |
| "media-type.com.hp.intermediate" = "Intermediate Paper"; |
| // TRANSLATORS: Mid-Weight Paper |
| "media-type.com.hp.mid-weight" = "Mid-Weight Paper"; |
| // TRANSLATORS: Inkjet Premium Paper |
| "media-type.com.hp.premium-inkjet" = "Inkjet Premium Paper"; |
| // TRANSLATORS: Photo Premium Paper |
| "media-type.com.hp.premium-photo" = "Photo Premium Paper"; |
| // TRANSLATORS: Premium Matte Presentation Paper |
| "media-type.com.hp.premium-presentation-matte" = "Premium Matte Presentation Paper"; |
| // TRANSLATORS: Continuous |
| "media-type.continuous" = "Continuous"; |
| // TRANSLATORS: Continuous Long |
| "media-type.continuous-long" = "Continuous Long"; |
| // TRANSLATORS: Continuous Short |
| "media-type.continuous-short" = "Continuous Short"; |
| // TRANSLATORS: Corrugated Board |
| "media-type.corrugated-board" = "Corrugated Board"; |
| // TRANSLATORS: Optical Disc |
| "media-type.disc" = "Optical Disc"; |
| // TRANSLATORS: Glossy Optical Disc |
| "media-type.disc-glossy" = "Glossy Optical Disc"; |
| // TRANSLATORS: High Gloss Optical Disc |
| "media-type.disc-high-gloss" = "High Gloss Optical Disc"; |
| // TRANSLATORS: Matte Optical Disc |
| "media-type.disc-matte" = "Matte Optical Disc"; |
| // TRANSLATORS: Satin Optical Disc |
| "media-type.disc-satin" = "Satin Optical Disc"; |
| // TRANSLATORS: Semi-Gloss Optical Disc |
| "media-type.disc-semi-gloss" = "Semi-Gloss Optical Disc"; |
| // TRANSLATORS: Double Wall |
| "media-type.double-wall" = "Double Wall"; |
| // TRANSLATORS: Dry Film |
| "media-type.dry-film" = "Dry Film"; |
| // TRANSLATORS: DVD |
| "media-type.dvd" = "DVD"; |
| // TRANSLATORS: Embossing Foil |
| "media-type.embossing-foil" = "Embossing Foil"; |
| // TRANSLATORS: End Board |
| "media-type.end-board" = "End Board"; |
| // TRANSLATORS: Envelope |
| "media-type.envelope" = "Envelope"; |
| // TRANSLATORS: Archival Envelope |
| "media-type.envelope-archival" = "Archival Envelope"; |
| // TRANSLATORS: Bond Envelope |
| "media-type.envelope-bond" = "Bond Envelope"; |
| // TRANSLATORS: Coated Envelope |
| "media-type.envelope-coated" = "Coated Envelope"; |
| // TRANSLATORS: Cotton Envelope |
| "media-type.envelope-cotton" = "Cotton Envelope"; |
| // TRANSLATORS: Fine Envelope |
| "media-type.envelope-fine" = "Fine Envelope"; |
| // TRANSLATORS: Heavyweight Envelope |
| "media-type.envelope-heavyweight" = "Heavyweight Envelope"; |
| // TRANSLATORS: Inkjet Envelope |
| "media-type.envelope-inkjet" = "Inkjet Envelope"; |
| // TRANSLATORS: Lightweight Envelope |
| "media-type.envelope-lightweight" = "Lightweight Envelope"; |
| // TRANSLATORS: Plain Envelope |
| "media-type.envelope-plain" = "Plain Envelope"; |
| // TRANSLATORS: Preprinted Envelope |
| "media-type.envelope-preprinted" = "Preprinted Envelope"; |
| // TRANSLATORS: Windowed Envelope |
| "media-type.envelope-window" = "Windowed Envelope"; |
| // TRANSLATORS: Fabric |
| "media-type.fabric" = "Fabric"; |
| // TRANSLATORS: Archival Fabric |
| "media-type.fabric-archival" = "Archival Fabric"; |
| // TRANSLATORS: Glossy Fabric |
| "media-type.fabric-glossy" = "Glossy Fabric"; |
| // TRANSLATORS: High Gloss Fabric |
| "media-type.fabric-high-gloss" = "High Gloss Fabric"; |
| // TRANSLATORS: Matte Fabric |
| "media-type.fabric-matte" = "Matte Fabric"; |
| // TRANSLATORS: Semi-Gloss Fabric |
| "media-type.fabric-semi-gloss" = "Semi-Gloss Fabric"; |
| // TRANSLATORS: Waterproof Fabric |
| "media-type.fabric-waterproof" = "Waterproof Fabric"; |
| // TRANSLATORS: Film |
| "media-type.film" = "Film"; |
| // TRANSLATORS: Flexo Base |
| "media-type.flexo-base" = "Flexo Base"; |
| // TRANSLATORS: Flexo Photo Polymer |
| "media-type.flexo-photo-polymer" = "Flexo Photo Polymer"; |
| // TRANSLATORS: Flute |
| "media-type.flute" = "Flute"; |
| // TRANSLATORS: Foil |
| "media-type.foil" = "Foil"; |
| // TRANSLATORS: Full Cut Tabs |
| "media-type.full-cut-tabs" = "Full Cut Tabs"; |
| // TRANSLATORS: Glass |
| "media-type.glass" = "Glass"; |
| // TRANSLATORS: Glass Colored |
| "media-type.glass-colored" = "Glass Colored"; |
| // TRANSLATORS: Glass Opaque |
| "media-type.glass-opaque" = "Glass Opaque"; |
| // TRANSLATORS: Glass Surfaced |
| "media-type.glass-surfaced" = "Glass Surfaced"; |
| // TRANSLATORS: Glass Textured |
| "media-type.glass-textured" = "Glass Textured"; |
| // TRANSLATORS: Gravure Cylinder |
| "media-type.gravure-cylinder" = "Gravure Cylinder"; |
| // TRANSLATORS: Image Setter Paper |
| "media-type.image-setter-paper" = "Image Setter Paper"; |
| // TRANSLATORS: Imaging Cylinder |
| "media-type.imaging-cylinder" = "Imaging Cylinder"; |
| // TRANSLATORS: Photo Paper Plus Glossy II |
| "media-type.jp.co.canon-photo-paper-plus-glossy-ii" = "Photo Paper Plus Glossy II"; |
| // TRANSLATORS: Photo Paper Pro Platinum |
| "media-type.jp.co.canon-photo-paper-pro-platinum" = "Photo Paper Pro Platinum"; |
| // TRANSLATORS: Photo Paper Plus Glossy II |
| "media-type.jp.co.canon_photo-paper-plus-glossy-ii" = "Photo Paper Plus Glossy II"; |
| // TRANSLATORS: Photo Paper Pro Platinum |
| "media-type.jp.co.canon_photo-paper-pro-platinum" = "Photo Paper Pro Platinum"; |
| // TRANSLATORS: Labels |
| "media-type.labels" = "Labels"; |
| // TRANSLATORS: Colored Labels |
| "media-type.labels-colored" = "Colored Labels"; |
| // TRANSLATORS: Glossy Labels |
| "media-type.labels-glossy" = "Glossy Labels"; |
| // TRANSLATORS: High Gloss Labels |
| "media-type.labels-high-gloss" = "High Gloss Labels"; |
| // TRANSLATORS: Inkjet Labels |
| "media-type.labels-inkjet" = "Inkjet Labels"; |
| // TRANSLATORS: Matte Labels |
| "media-type.labels-matte" = "Matte Labels"; |
| // TRANSLATORS: Permanent Labels |
| "media-type.labels-permanent" = "Permanent Labels"; |
| // TRANSLATORS: Satin Labels |
| "media-type.labels-satin" = "Satin Labels"; |
| // TRANSLATORS: Security Labels |
| "media-type.labels-security" = "Security Labels"; |
| // TRANSLATORS: Semi-Gloss Labels |
| "media-type.labels-semi-gloss" = "Semi-Gloss Labels"; |
| // TRANSLATORS: Laminating Foil |
| "media-type.laminating-foil" = "Laminating Foil"; |
| // TRANSLATORS: Letterhead |
| "media-type.letterhead" = "Letterhead"; |
| // TRANSLATORS: Metal |
| "media-type.metal" = "Metal"; |
| // TRANSLATORS: Metal Glossy |
| "media-type.metal-glossy" = "Metal Glossy"; |
| // TRANSLATORS: Metal High Gloss |
| "media-type.metal-high-gloss" = "Metal High Gloss"; |
| // TRANSLATORS: Metal Matte |
| "media-type.metal-matte" = "Metal Matte"; |
| // TRANSLATORS: Metal Satin |
| "media-type.metal-satin" = "Metal Satin"; |
| // TRANSLATORS: Metal Semi Gloss |
| "media-type.metal-semi-gloss" = "Metal Semi Gloss"; |
| // TRANSLATORS: Mounting Tape |
| "media-type.mounting-tape" = "Mounting Tape"; |
| // TRANSLATORS: Multi Layer |
| "media-type.multi-layer" = "Multi Layer"; |
| // TRANSLATORS: Multi Part Form |
| "media-type.multi-part-form" = "Multi Part Form"; |
| // TRANSLATORS: Other |
| "media-type.other" = "Other"; |
| // TRANSLATORS: Paper |
| "media-type.paper" = "Paper"; |
| // TRANSLATORS: Photo Paper |
| "media-type.photographic" = "Photo Paper"; |
| // TRANSLATORS: Photographic Archival |
| "media-type.photographic-archival" = "Photographic Archival"; |
| // TRANSLATORS: Photo Film |
| "media-type.photographic-film" = "Photo Film"; |
| // TRANSLATORS: Glossy Photo Paper |
| "media-type.photographic-glossy" = "Glossy Photo Paper"; |
| // TRANSLATORS: High Gloss Photo Paper |
| "media-type.photographic-high-gloss" = "High Gloss Photo Paper"; |
| // TRANSLATORS: Matte Photo Paper |
| "media-type.photographic-matte" = "Matte Photo Paper"; |
| // TRANSLATORS: Satin Photo Paper |
| "media-type.photographic-satin" = "Satin Photo Paper"; |
| // TRANSLATORS: Semi-Gloss Photo Paper |
| "media-type.photographic-semi-gloss" = "Semi-Gloss Photo Paper"; |
| // TRANSLATORS: Plastic |
| "media-type.plastic" = "Plastic"; |
| // TRANSLATORS: Plastic Archival |
| "media-type.plastic-archival" = "Plastic Archival"; |
| // TRANSLATORS: Plastic Colored |
| "media-type.plastic-colored" = "Plastic Colored"; |
| // TRANSLATORS: Plastic Glossy |
| "media-type.plastic-glossy" = "Plastic Glossy"; |
| // TRANSLATORS: Plastic High Gloss |
| "media-type.plastic-high-gloss" = "Plastic High Gloss"; |
| // TRANSLATORS: Plastic Matte |
| "media-type.plastic-matte" = "Plastic Matte"; |
| // TRANSLATORS: Plastic Satin |
| "media-type.plastic-satin" = "Plastic Satin"; |
| // TRANSLATORS: Plastic Semi Gloss |
| "media-type.plastic-semi-gloss" = "Plastic Semi Gloss"; |
| // TRANSLATORS: Plate |
| "media-type.plate" = "Plate"; |
| // TRANSLATORS: Polyester |
| "media-type.polyester" = "Polyester"; |
| // TRANSLATORS: Pre Cut Tabs |
| "media-type.pre-cut-tabs" = "Pre Cut Tabs"; |
| // TRANSLATORS: Roll |
| "media-type.roll" = "Roll"; |
| // TRANSLATORS: Screen |
| "media-type.screen" = "Screen"; |
| // TRANSLATORS: Screen Paged |
| "media-type.screen-paged" = "Screen Paged"; |
| // TRANSLATORS: Self Adhesive |
| "media-type.self-adhesive" = "Self Adhesive"; |
| // TRANSLATORS: Self Adhesive Film |
| "media-type.self-adhesive-film" = "Self Adhesive Film"; |
| // TRANSLATORS: Shrink Foil |
| "media-type.shrink-foil" = "Shrink Foil"; |
| // TRANSLATORS: Single Face |
| "media-type.single-face" = "Single Face"; |
| // TRANSLATORS: Single Wall |
| "media-type.single-wall" = "Single Wall"; |
| // TRANSLATORS: Sleeve |
| "media-type.sleeve" = "Sleeve"; |
| // TRANSLATORS: Stationery |
| "media-type.stationery" = "Stationery"; |
| // TRANSLATORS: Stationery Archival |
| "media-type.stationery-archival" = "Stationery Archival"; |
| // TRANSLATORS: Coated Paper |
| "media-type.stationery-coated" = "Coated Paper"; |
| // TRANSLATORS: Stationery Cotton |
| "media-type.stationery-cotton" = "Stationery Cotton"; |
| // TRANSLATORS: Vellum Paper |
| "media-type.stationery-fine" = "Vellum Paper"; |
| // TRANSLATORS: Heavyweight Paper |
| "media-type.stationery-heavyweight" = "Heavyweight Paper"; |
| // TRANSLATORS: Stationery Heavyweight Coated |
| "media-type.stationery-heavyweight-coated" = "Stationery Heavyweight Coated"; |
| // TRANSLATORS: Stationery Inkjet Paper |
| "media-type.stationery-inkjet" = "Stationery Inkjet Paper"; |
| // TRANSLATORS: Letterhead |
| "media-type.stationery-letterhead" = "Letterhead"; |
| // TRANSLATORS: Lightweight Paper |
| "media-type.stationery-lightweight" = "Lightweight Paper"; |
| // TRANSLATORS: Preprinted Paper |
| "media-type.stationery-preprinted" = "Preprinted Paper"; |
| // TRANSLATORS: Punched Paper |
| "media-type.stationery-prepunched" = "Punched Paper"; |
| // TRANSLATORS: Tab Stock |
| "media-type.tab-stock" = "Tab Stock"; |
| // TRANSLATORS: Tractor |
| "media-type.tractor" = "Tractor"; |
| // TRANSLATORS: Transfer |
| "media-type.transfer" = "Transfer"; |
| // TRANSLATORS: Transparency |
| "media-type.transparency" = "Transparency"; |
| // TRANSLATORS: Triple Wall |
| "media-type.triple-wall" = "Triple Wall"; |
| // TRANSLATORS: Wet Film |
| "media-type.wet-film" = "Wet Film"; |
| // TRANSLATORS: Media Weight (grams per m²) |
| "media-weight-metric" = "Media Weight (grams per m²)"; |
| // TRANSLATORS: 28 x 40″ |
| "media.asme_f_28x40in" = "28 x 40″"; |
| // TRANSLATORS: A4 or US Letter |
| "media.choice_iso_a4_210x297mm_na_letter_8.5x11in" = "A4 or US Letter"; |
| // TRANSLATORS: 2a0 |
| "media.iso_2a0_1189x1682mm" = "2a0"; |
| // TRANSLATORS: A0 |
| "media.iso_a0_841x1189mm" = "A0"; |
| // TRANSLATORS: A0x3 |
| "media.iso_a0x3_1189x2523mm" = "A0x3"; |
| // TRANSLATORS: A10 |
| "media.iso_a10_26x37mm" = "A10"; |
| // TRANSLATORS: A1 |
| "media.iso_a1_594x841mm" = "A1"; |
| // TRANSLATORS: A1x3 |
| "media.iso_a1x3_841x1783mm" = "A1x3"; |
| // TRANSLATORS: A1x4 |
| "media.iso_a1x4_841x2378mm" = "A1x4"; |
| // TRANSLATORS: A2 |
| "media.iso_a2_420x594mm" = "A2"; |
| // TRANSLATORS: A2x3 |
| "media.iso_a2x3_594x1261mm" = "A2x3"; |
| // TRANSLATORS: A2x4 |
| "media.iso_a2x4_594x1682mm" = "A2x4"; |
| // TRANSLATORS: A2x5 |
| "media.iso_a2x5_594x2102mm" = "A2x5"; |
| // TRANSLATORS: A3 (Extra) |
| "media.iso_a3-extra_322x445mm" = "A3 (Extra)"; |
| // TRANSLATORS: A3 |
| "media.iso_a3_297x420mm" = "A3"; |
| // TRANSLATORS: A3x3 |
| "media.iso_a3x3_420x891mm" = "A3x3"; |
| // TRANSLATORS: A3x4 |
| "media.iso_a3x4_420x1189mm" = "A3x4"; |
| // TRANSLATORS: A3x5 |
| "media.iso_a3x5_420x1486mm" = "A3x5"; |
| // TRANSLATORS: A3x6 |
| "media.iso_a3x6_420x1783mm" = "A3x6"; |
| // TRANSLATORS: A3x7 |
| "media.iso_a3x7_420x2080mm" = "A3x7"; |
| // TRANSLATORS: A4 (Extra) |
| "media.iso_a4-extra_235.5x322.3mm" = "A4 (Extra)"; |
| // TRANSLATORS: A4 (Tab) |
| "media.iso_a4-tab_225x297mm" = "A4 (Tab)"; |
| // TRANSLATORS: A4 |
| "media.iso_a4_210x297mm" = "A4"; |
| // TRANSLATORS: A4x3 |
| "media.iso_a4x3_297x630mm" = "A4x3"; |
| // TRANSLATORS: A4x4 |
| "media.iso_a4x4_297x841mm" = "A4x4"; |
| // TRANSLATORS: A4x5 |
| "media.iso_a4x5_297x1051mm" = "A4x5"; |
| // TRANSLATORS: A4x6 |
| "media.iso_a4x6_297x1261mm" = "A4x6"; |
| // TRANSLATORS: A4x7 |
| "media.iso_a4x7_297x1471mm" = "A4x7"; |
| // TRANSLATORS: A4x8 |
| "media.iso_a4x8_297x1682mm" = "A4x8"; |
| // TRANSLATORS: A4x9 |
| "media.iso_a4x9_297x1892mm" = "A4x9"; |
| // TRANSLATORS: A5 (Extra) |
| "media.iso_a5-extra_174x235mm" = "A5 (Extra)"; |
| // TRANSLATORS: A5 |
| "media.iso_a5_148x210mm" = "A5"; |
| // TRANSLATORS: A6 |
| "media.iso_a6_105x148mm" = "A6"; |
| // TRANSLATORS: A7 |
| "media.iso_a7_74x105mm" = "A7"; |
| // TRANSLATORS: A8 |
| "media.iso_a8_52x74mm" = "A8"; |
| // TRANSLATORS: A9 |
| "media.iso_a9_37x52mm" = "A9"; |
| // TRANSLATORS: B0 |
| "media.iso_b0_1000x1414mm" = "B0"; |
| // TRANSLATORS: B10 |
| "media.iso_b10_31x44mm" = "B10"; |
| // TRANSLATORS: B1 |
| "media.iso_b1_707x1000mm" = "B1"; |
| // TRANSLATORS: B2 |
| "media.iso_b2_500x707mm" = "B2"; |
| // TRANSLATORS: B3 |
| "media.iso_b3_353x500mm" = "B3"; |
| // TRANSLATORS: B4 |
| "media.iso_b4_250x353mm" = "B4"; |
| // TRANSLATORS: B5 (Extra) |
| "media.iso_b5-extra_201x276mm" = "B5 (Extra)"; |
| // TRANSLATORS: Envelope B5 |
| "media.iso_b5_176x250mm" = "Envelope B5"; |
| // TRANSLATORS: B6 |
| "media.iso_b6_125x176mm" = "B6"; |
| // TRANSLATORS: Envelope B6/C4 |
| "media.iso_b6c4_125x324mm" = "Envelope B6/C4"; |
| // TRANSLATORS: B7 |
| "media.iso_b7_88x125mm" = "B7"; |
| // TRANSLATORS: B8 |
| "media.iso_b8_62x88mm" = "B8"; |
| // TRANSLATORS: B9 |
| "media.iso_b9_44x62mm" = "B9"; |
| // TRANSLATORS: CEnvelope 0 |
| "media.iso_c0_917x1297mm" = "CEnvelope 0"; |
| // TRANSLATORS: CEnvelope 10 |
| "media.iso_c10_28x40mm" = "CEnvelope 10"; |
| // TRANSLATORS: CEnvelope 1 |
| "media.iso_c1_648x917mm" = "CEnvelope 1"; |
| // TRANSLATORS: CEnvelope 2 |
| "media.iso_c2_458x648mm" = "CEnvelope 2"; |
| // TRANSLATORS: CEnvelope 3 |
| "media.iso_c3_324x458mm" = "CEnvelope 3"; |
| // TRANSLATORS: CEnvelope 4 |
| "media.iso_c4_229x324mm" = "CEnvelope 4"; |
| // TRANSLATORS: CEnvelope 5 |
| "media.iso_c5_162x229mm" = "CEnvelope 5"; |
| // TRANSLATORS: CEnvelope 6 |
| "media.iso_c6_114x162mm" = "CEnvelope 6"; |
| // TRANSLATORS: CEnvelope 6c5 |
| "media.iso_c6c5_114x229mm" = "CEnvelope 6c5"; |
| // TRANSLATORS: CEnvelope 7 |
| "media.iso_c7_81x114mm" = "CEnvelope 7"; |
| // TRANSLATORS: CEnvelope 7c6 |
| "media.iso_c7c6_81x162mm" = "CEnvelope 7c6"; |
| // TRANSLATORS: CEnvelope 8 |
| "media.iso_c8_57x81mm" = "CEnvelope 8"; |
| // TRANSLATORS: CEnvelope 9 |
| "media.iso_c9_40x57mm" = "CEnvelope 9"; |
| // TRANSLATORS: Envelope DL |
| "media.iso_dl_110x220mm" = "Envelope DL"; |
| // TRANSLATORS: Id-1 |
| "media.iso_id-1_53.98x85.6mm" = "Id-1"; |
| // TRANSLATORS: Id-3 |
| "media.iso_id-3_88x125mm" = "Id-3"; |
| // TRANSLATORS: ISO RA0 |
| "media.iso_ra0_860x1220mm" = "ISO RA0"; |
| // TRANSLATORS: ISO RA1 |
| "media.iso_ra1_610x860mm" = "ISO RA1"; |
| // TRANSLATORS: ISO RA2 |
| "media.iso_ra2_430x610mm" = "ISO RA2"; |
| // TRANSLATORS: ISO RA3 |
| "media.iso_ra3_305x430mm" = "ISO RA3"; |
| // TRANSLATORS: ISO RA4 |
| "media.iso_ra4_215x305mm" = "ISO RA4"; |
| // TRANSLATORS: ISO SRA0 |
| "media.iso_sra0_900x1280mm" = "ISO SRA0"; |
| // TRANSLATORS: ISO SRA1 |
| "media.iso_sra1_640x900mm" = "ISO SRA1"; |
| // TRANSLATORS: ISO SRA2 |
| "media.iso_sra2_450x640mm" = "ISO SRA2"; |
| // TRANSLATORS: ISO SRA3 |
| "media.iso_sra3_320x450mm" = "ISO SRA3"; |
| // TRANSLATORS: ISO SRA4 |
| "media.iso_sra4_225x320mm" = "ISO SRA4"; |
| // TRANSLATORS: JIS B0 |
| "media.jis_b0_1030x1456mm" = "JIS B0"; |
| // TRANSLATORS: JIS B10 |
| "media.jis_b10_32x45mm" = "JIS B10"; |
| // TRANSLATORS: JIS B1 |
| "media.jis_b1_728x1030mm" = "JIS B1"; |
| // TRANSLATORS: JIS B2 |
| "media.jis_b2_515x728mm" = "JIS B2"; |
| // TRANSLATORS: JIS B3 |
| "media.jis_b3_364x515mm" = "JIS B3"; |
| // TRANSLATORS: JIS B4 |
| "media.jis_b4_257x364mm" = "JIS B4"; |
| // TRANSLATORS: JIS B5 |
| "media.jis_b5_182x257mm" = "JIS B5"; |
| // TRANSLATORS: JIS B6 |
| "media.jis_b6_128x182mm" = "JIS B6"; |
| // TRANSLATORS: JIS B7 |
| "media.jis_b7_91x128mm" = "JIS B7"; |
| // TRANSLATORS: JIS B8 |
| "media.jis_b8_64x91mm" = "JIS B8"; |
| // TRANSLATORS: JIS B9 |
| "media.jis_b9_45x64mm" = "JIS B9"; |
| // TRANSLATORS: JIS Executive |
| "media.jis_exec_216x330mm" = "JIS Executive"; |
| // TRANSLATORS: Envelope Chou 2 |
| "media.jpn_chou2_111.1x146mm" = "Envelope Chou 2"; |
| // TRANSLATORS: Envelope Chou 3 |
| "media.jpn_chou3_120x235mm" = "Envelope Chou 3"; |
| // TRANSLATORS: Envelope Chou 40 |
| "media.jpn_chou40_90x225mm" = "Envelope Chou 40"; |
| // TRANSLATORS: Envelope Chou 4 |
| "media.jpn_chou4_90x205mm" = "Envelope Chou 4"; |
| // TRANSLATORS: Hagaki |
| "media.jpn_hagaki_100x148mm" = "Hagaki"; |
| // TRANSLATORS: Envelope Kahu |
| "media.jpn_kahu_240x322.1mm" = "Envelope Kahu"; |
| // TRANSLATORS: 270 x 382mm |
| "media.jpn_kaku1_270x382mm" = "270 x 382mm"; |
| // TRANSLATORS: Envelope Kahu 2 |
| "media.jpn_kaku2_240x332mm" = "Envelope Kahu 2"; |
| // TRANSLATORS: 216 x 277mm |
| "media.jpn_kaku3_216x277mm" = "216 x 277mm"; |
| // TRANSLATORS: 197 x 267mm |
| "media.jpn_kaku4_197x267mm" = "197 x 267mm"; |
| // TRANSLATORS: 190 x 240mm |
| "media.jpn_kaku5_190x240mm" = "190 x 240mm"; |
| // TRANSLATORS: 142 x 205mm |
| "media.jpn_kaku7_142x205mm" = "142 x 205mm"; |
| // TRANSLATORS: 119 x 197mm |
| "media.jpn_kaku8_119x197mm" = "119 x 197mm"; |
| // TRANSLATORS: Oufuku Reply Postcard |
| "media.jpn_oufuku_148x200mm" = "Oufuku Reply Postcard"; |
| // TRANSLATORS: Envelope You 4 |
| "media.jpn_you4_105x235mm" = "Envelope You 4"; |
| // TRANSLATORS: 10 x 11″ |
| "media.na_10x11_10x11in" = "10 x 11″"; |
| // TRANSLATORS: 10 x 13″ |
| "media.na_10x13_10x13in" = "10 x 13″"; |
| // TRANSLATORS: 10 x 14″ |
| "media.na_10x14_10x14in" = "10 x 14″"; |
| // TRANSLATORS: 10 x 15″ |
| "media.na_10x15_10x15in" = "10 x 15″"; |
| // TRANSLATORS: 11 x 12″ |
| "media.na_11x12_11x12in" = "11 x 12″"; |
| // TRANSLATORS: 11 x 15″ |
| "media.na_11x15_11x15in" = "11 x 15″"; |
| // TRANSLATORS: 12 x 19″ |
| "media.na_12x19_12x19in" = "12 x 19″"; |
| // TRANSLATORS: 5 x 7″ |
| "media.na_5x7_5x7in" = "5 x 7″"; |
| // TRANSLATORS: 6 x 9″ |
| "media.na_6x9_6x9in" = "6 x 9″"; |
| // TRANSLATORS: 7 x 9″ |
| "media.na_7x9_7x9in" = "7 x 9″"; |
| // TRANSLATORS: 9 x 11″ |
| "media.na_9x11_9x11in" = "9 x 11″"; |
| // TRANSLATORS: Envelope A2 |
| "media.na_a2_4.375x5.75in" = "Envelope A2"; |
| // TRANSLATORS: 9 x 12″ |
| "media.na_arch-a_9x12in" = "9 x 12″"; |
| // TRANSLATORS: 12 x 18″ |
| "media.na_arch-b_12x18in" = "12 x 18″"; |
| // TRANSLATORS: 18 x 24″ |
| "media.na_arch-c_18x24in" = "18 x 24″"; |
| // TRANSLATORS: 24 x 36″ |
| "media.na_arch-d_24x36in" = "24 x 36″"; |
| // TRANSLATORS: 26 x 38″ |
| "media.na_arch-e2_26x38in" = "26 x 38″"; |
| // TRANSLATORS: 27 x 39″ |
| "media.na_arch-e3_27x39in" = "27 x 39″"; |
| // TRANSLATORS: 36 x 48″ |
| "media.na_arch-e_36x48in" = "36 x 48″"; |
| // TRANSLATORS: 12 x 19.17″ |
| "media.na_b-plus_12x19.17in" = "12 x 19.17″"; |
| // TRANSLATORS: Envelope C5 |
| "media.na_c5_6.5x9.5in" = "Envelope C5"; |
| // TRANSLATORS: 17 x 22″ |
| "media.na_c_17x22in" = "17 x 22″"; |
| // TRANSLATORS: 22 x 34″ |
| "media.na_d_22x34in" = "22 x 34″"; |
| // TRANSLATORS: 34 x 44″ |
| "media.na_e_34x44in" = "34 x 44″"; |
| // TRANSLATORS: 11 x 14″ |
| "media.na_edp_11x14in" = "11 x 14″"; |
| // TRANSLATORS: 12 x 14″ |
| "media.na_eur-edp_12x14in" = "12 x 14″"; |
| // TRANSLATORS: Executive |
| "media.na_executive_7.25x10.5in" = "Executive"; |
| // TRANSLATORS: 44 x 68″ |
| "media.na_f_44x68in" = "44 x 68″"; |
| // TRANSLATORS: European Fanfold |
| "media.na_fanfold-eur_8.5x12in" = "European Fanfold"; |
| // TRANSLATORS: US Fanfold |
| "media.na_fanfold-us_11x14.875in" = "US Fanfold"; |
| // TRANSLATORS: Foolscap |
| "media.na_foolscap_8.5x13in" = "Foolscap"; |
| // TRANSLATORS: 8 x 13″ |
| "media.na_govt-legal_8x13in" = "8 x 13″"; |
| // TRANSLATORS: 8 x 10″ |
| "media.na_govt-letter_8x10in" = "8 x 10″"; |
| // TRANSLATORS: 3 x 5″ |
| "media.na_index-3x5_3x5in" = "3 x 5″"; |
| // TRANSLATORS: 6 x 8″ |
| "media.na_index-4x6-ext_6x8in" = "6 x 8″"; |
| // TRANSLATORS: 4 x 6″ |
| "media.na_index-4x6_4x6in" = "4 x 6″"; |
| // TRANSLATORS: 5 x 8″ |
| "media.na_index-5x8_5x8in" = "5 x 8″"; |
| // TRANSLATORS: Statement |
| "media.na_invoice_5.5x8.5in" = "Statement"; |
| // TRANSLATORS: 11 x 17″ |
| "media.na_ledger_11x17in" = "11 x 17″"; |
| // TRANSLATORS: US Legal (Extra) |
| "media.na_legal-extra_9.5x15in" = "US Legal (Extra)"; |
| // TRANSLATORS: US Legal |
| "media.na_legal_8.5x14in" = "US Legal"; |
| // TRANSLATORS: US Letter (Extra) |
| "media.na_letter-extra_9.5x12in" = "US Letter (Extra)"; |
| // TRANSLATORS: US Letter (Plus) |
| "media.na_letter-plus_8.5x12.69in" = "US Letter (Plus)"; |
| // TRANSLATORS: US Letter |
| "media.na_letter_8.5x11in" = "US Letter"; |
| // TRANSLATORS: Envelope Monarch |
| "media.na_monarch_3.875x7.5in" = "Envelope Monarch"; |
| // TRANSLATORS: Envelope #10 |
| "media.na_number-10_4.125x9.5in" = "Envelope #10"; |
| // TRANSLATORS: Envelope #11 |
| "media.na_number-11_4.5x10.375in" = "Envelope #11"; |
| // TRANSLATORS: Envelope #12 |
| "media.na_number-12_4.75x11in" = "Envelope #12"; |
| // TRANSLATORS: Envelope #14 |
| "media.na_number-14_5x11.5in" = "Envelope #14"; |
| // TRANSLATORS: Envelope #9 |
| "media.na_number-9_3.875x8.875in" = "Envelope #9"; |
| // TRANSLATORS: 8.5 x 13.4″ |
| "media.na_oficio_8.5x13.4in" = "8.5 x 13.4″"; |
| // TRANSLATORS: Envelope Personal |
| "media.na_personal_3.625x6.5in" = "Envelope Personal"; |
| // TRANSLATORS: Quarto |
| "media.na_quarto_8.5x10.83in" = "Quarto"; |
| // TRANSLATORS: 8.94 x 14″ |
| "media.na_super-a_8.94x14in" = "8.94 x 14″"; |
| // TRANSLATORS: 13 x 19″ |
| "media.na_super-b_13x19in" = "13 x 19″"; |
| // TRANSLATORS: 30 x 42″ |
| "media.na_wide-format_30x42in" = "30 x 42″"; |
| // TRANSLATORS: 12 x 16″ |
| "media.oe_12x16_12x16in" = "12 x 16″"; |
| // TRANSLATORS: 14 x 17″ |
| "media.oe_14x17_14x17in" = "14 x 17″"; |
| // TRANSLATORS: 18 x 22″ |
| "media.oe_18x22_18x22in" = "18 x 22″"; |
| // TRANSLATORS: 17 x 24″ |
| "media.oe_a2plus_17x24in" = "17 x 24″"; |
| // TRANSLATORS: 2 x 3.5″ |
| "media.oe_business-card_2x3.5in" = "2 x 3.5″"; |
| // TRANSLATORS: 10 x 12″ |
| "media.oe_photo-10r_10x12in" = "10 x 12″"; |
| // TRANSLATORS: 20 x 24″ |
| "media.oe_photo-20r_20x24in" = "20 x 24″"; |
| // TRANSLATORS: 3.5 x 5″ |
| "media.oe_photo-l_3.5x5in" = "3.5 x 5″"; |
| // TRANSLATORS: 10 x 15″ |
| "media.oe_photo-s10r_10x15in" = "10 x 15″"; |
| // TRANSLATORS: 4 x 4″ |
| "media.oe_square-photo_4x4in" = "4 x 4″"; |
| // TRANSLATORS: 5 x 5″ |
| "media.oe_square-photo_5x5in" = "5 x 5″"; |
| // TRANSLATORS: 184 x 260mm |
| "media.om_16k_184x260mm" = "184 x 260mm"; |
| // TRANSLATORS: 195 x 270mm |
| "media.om_16k_195x270mm" = "195 x 270mm"; |
| // TRANSLATORS: 55 x 85mm |
| "media.om_business-card_55x85mm" = "55 x 85mm"; |
| // TRANSLATORS: 55 x 91mm |
| "media.om_business-card_55x91mm" = "55 x 91mm"; |
| // TRANSLATORS: 54 x 86mm |
| "media.om_card_54x86mm" = "54 x 86mm"; |
| // TRANSLATORS: 275 x 395mm |
| "media.om_dai-pa-kai_275x395mm" = "275 x 395mm"; |
| // TRANSLATORS: 89 x 119mm |
| "media.om_dsc-photo_89x119mm" = "89 x 119mm"; |
| // TRANSLATORS: Folio |
| "media.om_folio-sp_215x315mm" = "Folio"; |
| // TRANSLATORS: Folio (Special) |
| "media.om_folio_210x330mm" = "Folio (Special)"; |
| // TRANSLATORS: Envelope Invitation |
| "media.om_invite_220x220mm" = "Envelope Invitation"; |
| // TRANSLATORS: Envelope Italian |
| "media.om_italian_110x230mm" = "Envelope Italian"; |
| // TRANSLATORS: 198 x 275mm |
| "media.om_juuro-ku-kai_198x275mm" = "198 x 275mm"; |
| // TRANSLATORS: 200 x 300 |
| "media.om_large-photo_200x300" = "200 x 300"; |
| // TRANSLATORS: 130 x 180mm |
| "media.om_medium-photo_130x180mm" = "130 x 180mm"; |
| // TRANSLATORS: 267 x 389mm |
| "media.om_pa-kai_267x389mm" = "267 x 389mm"; |
| // TRANSLATORS: Envelope Postfix |
| "media.om_postfix_114x229mm" = "Envelope Postfix"; |
| // TRANSLATORS: 100 x 150mm |
| "media.om_small-photo_100x150mm" = "100 x 150mm"; |
| // TRANSLATORS: 89 x 89mm |
| "media.om_square-photo_89x89mm" = "89 x 89mm"; |
| // TRANSLATORS: 100 x 200mm |
| "media.om_wide-photo_100x200mm" = "100 x 200mm"; |
| // TRANSLATORS: Envelope Chinese #10 |
| "media.prc_10_324x458mm" = "Envelope Chinese #10"; |
| // TRANSLATORS: Chinese 16k |
| "media.prc_16k_146x215mm" = "Chinese 16k"; |
| // TRANSLATORS: Envelope Chinese #1 |
| "media.prc_1_102x165mm" = "Envelope Chinese #1"; |
| // TRANSLATORS: Envelope Chinese #2 |
| "media.prc_2_102x176mm" = "Envelope Chinese #2"; |
| // TRANSLATORS: Chinese 32k |
| "media.prc_32k_97x151mm" = "Chinese 32k"; |
| // TRANSLATORS: Envelope Chinese #3 |
| "media.prc_3_125x176mm" = "Envelope Chinese #3"; |
| // TRANSLATORS: Envelope Chinese #4 |
| "media.prc_4_110x208mm" = "Envelope Chinese #4"; |
| // TRANSLATORS: Envelope Chinese #5 |
| "media.prc_5_110x220mm" = "Envelope Chinese #5"; |
| // TRANSLATORS: Envelope Chinese #6 |
| "media.prc_6_120x320mm" = "Envelope Chinese #6"; |
| // TRANSLATORS: Envelope Chinese #7 |
| "media.prc_7_160x230mm" = "Envelope Chinese #7"; |
| // TRANSLATORS: Envelope Chinese #8 |
| "media.prc_8_120x309mm" = "Envelope Chinese #8"; |
| // TRANSLATORS: ROC 16k |
| "media.roc_16k_7.75x10.75in" = "ROC 16k"; |
| // TRANSLATORS: ROC 8k |
| "media.roc_8k_10.75x15.5in" = "ROC 8k"; |
| "members of class %s:" = "members of class %s:"; |
| // TRANSLATORS: Multiple Document Handling |
| "multiple-document-handling" = "Multiple Document Handling"; |
| // TRANSLATORS: Separate Documents Collated Copies |
| "multiple-document-handling.separate-documents-collated-copies" = "Separate Documents Collated Copies"; |
| // TRANSLATORS: Separate Documents Uncollated Copies |
| "multiple-document-handling.separate-documents-uncollated-copies" = "Separate Documents Uncollated Copies"; |
| // TRANSLATORS: Single Document |
| "multiple-document-handling.single-document" = "Single Document"; |
| // TRANSLATORS: Single Document New Sheet |
| "multiple-document-handling.single-document-new-sheet" = "Single Document New Sheet"; |
| // TRANSLATORS: Multiple Object Handling |
| "multiple-object-handling" = "Multiple Object Handling"; |
| // TRANSLATORS: Multiple Object Handling Actual |
| "multiple-object-handling-actual" = "Multiple Object Handling Actual"; |
| // TRANSLATORS: Automatic |
| "multiple-object-handling.auto" = "Automatic"; |
| // TRANSLATORS: Best Fit |
| "multiple-object-handling.best-fit" = "Best Fit"; |
| // TRANSLATORS: Best Quality |
| "multiple-object-handling.best-quality" = "Best Quality"; |
| // TRANSLATORS: Best Speed |
| "multiple-object-handling.best-speed" = "Best Speed"; |
| // TRANSLATORS: One At A Time |
| "multiple-object-handling.one-at-a-time" = "One At A Time"; |
| // TRANSLATORS: On Timeout |
| "multiple-operation-time-out-action" = "On Timeout"; |
| // TRANSLATORS: Abort Job |
| "multiple-operation-time-out-action.abort-job" = "Abort Job"; |
| // TRANSLATORS: Hold Job |
| "multiple-operation-time-out-action.hold-job" = "Hold Job"; |
| // TRANSLATORS: Process Job |
| "multiple-operation-time-out-action.process-job" = "Process Job"; |
| "no entries" = "no entries"; |
| "no system default destination" = "no system default destination"; |
| // TRANSLATORS: Noise Removal |
| "noise-removal" = "Noise Removal"; |
| // TRANSLATORS: Notify Attributes |
| "notify-attributes" = "Notify Attributes"; |
| // TRANSLATORS: Notify Charset |
| "notify-charset" = "Notify Charset"; |
| // TRANSLATORS: Notify Events |
| "notify-events" = "Notify Events"; |
| "notify-events not specified." = "notify-events not specified."; |
| // TRANSLATORS: Document Completed |
| "notify-events.document-completed" = "Document Completed"; |
| // TRANSLATORS: Document Config Changed |
| "notify-events.document-config-changed" = "Document Config Changed"; |
| // TRANSLATORS: Document Created |
| "notify-events.document-created" = "Document Created"; |
| // TRANSLATORS: Document Fetchable |
| "notify-events.document-fetchable" = "Document Fetchable"; |
| // TRANSLATORS: Document State Changed |
| "notify-events.document-state-changed" = "Document State Changed"; |
| // TRANSLATORS: Document Stopped |
| "notify-events.document-stopped" = "Document Stopped"; |
| // TRANSLATORS: Job Completed |
| "notify-events.job-completed" = "Job Completed"; |
| // TRANSLATORS: Job Config Changed |
| "notify-events.job-config-changed" = "Job Config Changed"; |
| // TRANSLATORS: Job Created |
| "notify-events.job-created" = "Job Created"; |
| // TRANSLATORS: Job Fetchable |
| "notify-events.job-fetchable" = "Job Fetchable"; |
| // TRANSLATORS: Job Progress |
| "notify-events.job-progress" = "Job Progress"; |
| // TRANSLATORS: Job State Changed |
| "notify-events.job-state-changed" = "Job State Changed"; |
| // TRANSLATORS: Job Stopped |
| "notify-events.job-stopped" = "Job Stopped"; |
| // TRANSLATORS: None |
| "notify-events.none" = "None"; |
| // TRANSLATORS: Printer Config Changed |
| "notify-events.printer-config-changed" = "Printer Config Changed"; |
| // TRANSLATORS: Printer Finishings Changed |
| "notify-events.printer-finishings-changed" = "Printer Finishings Changed"; |
| // TRANSLATORS: Printer Media Changed |
| "notify-events.printer-media-changed" = "Printer Media Changed"; |
| // TRANSLATORS: Printer Queue Order Changed |
| "notify-events.printer-queue-order-changed" = "Printer Queue Order Changed"; |
| // TRANSLATORS: Printer Restarted |
| "notify-events.printer-restarted" = "Printer Restarted"; |
| // TRANSLATORS: Printer Shutdown |
| "notify-events.printer-shutdown" = "Printer Shutdown"; |
| // TRANSLATORS: Printer State Changed |
| "notify-events.printer-state-changed" = "Printer State Changed"; |
| // TRANSLATORS: Printer Stopped |
| "notify-events.printer-stopped" = "Printer Stopped"; |
| // TRANSLATORS: Notify Get Interval |
| "notify-get-interval" = "Notify Get Interval"; |
| // TRANSLATORS: Notify Lease Duration |
| "notify-lease-duration" = "Notify Lease Duration"; |
| // TRANSLATORS: Notify Natural Language |
| "notify-natural-language" = "Notify Natural Language"; |
| // TRANSLATORS: Notify Pull Method |
| "notify-pull-method" = "Notify Pull Method"; |
| // TRANSLATORS: Notify Recipient |
| "notify-recipient-uri" = "Notify Recipient"; |
| "notify-recipient-uri URI \"%s\" is already used." = "notify-recipient-uri URI “%s” is already used."; |
| "notify-recipient-uri URI \"%s\" uses unknown scheme." = "notify-recipient-uri URI \"%s\" uses unknown scheme."; |
| // TRANSLATORS: Notify Sequence Numbers |
| "notify-sequence-numbers" = "Notify Sequence Numbers"; |
| // TRANSLATORS: Notify Subscription Ids |
| "notify-subscription-ids" = "Notify Subscription Ids"; |
| // TRANSLATORS: Notify Time Interval |
| "notify-time-interval" = "Notify Time Interval"; |
| // TRANSLATORS: Notify User Data |
| "notify-user-data" = "Notify User Data"; |
| // TRANSLATORS: Notify Wait |
| "notify-wait" = "Notify Wait"; |
| // TRANSLATORS: Number Of Retries |
| "number-of-retries" = "Number Of Retries"; |
| // TRANSLATORS: Number-Up |
| "number-up" = "Number-Up"; |
| // TRANSLATORS: Object Offset |
| "object-offset" = "Object Offset"; |
| // TRANSLATORS: Object Size |
| "object-size" = "Object Size"; |
| // TRANSLATORS: Organization Name |
| "organization-name" = "Organization Name"; |
| // TRANSLATORS: Orientation |
| "orientation-requested" = "Orientation"; |
| // TRANSLATORS: Portrait |
| "orientation-requested.3" = "Portrait"; |
| // TRANSLATORS: Landscape |
| "orientation-requested.4" = "Landscape"; |
| // TRANSLATORS: Reverse Landscape |
| "orientation-requested.5" = "Reverse Landscape"; |
| // TRANSLATORS: Reverse Portrait |
| "orientation-requested.6" = "Reverse Portrait"; |
| // TRANSLATORS: None |
| "orientation-requested.7" = "None"; |
| // TRANSLATORS: Scanned Image Options |
| "output-attributes" = "Scanned Image Options"; |
| // TRANSLATORS: Output Tray |
| "output-bin" = "Output Tray"; |
| // TRANSLATORS: Automatic |
| "output-bin.auto" = "Automatic"; |
| // TRANSLATORS: Bottom |
| "output-bin.bottom" = "Bottom"; |
| // TRANSLATORS: Center |
| "output-bin.center" = "Center"; |
| // TRANSLATORS: Face Down |
| "output-bin.face-down" = "Face Down"; |
| // TRANSLATORS: Face Up |
| "output-bin.face-up" = "Face Up"; |
| // TRANSLATORS: Large Capacity |
| "output-bin.large-capacity" = "Large Capacity"; |
| // TRANSLATORS: Left |
| "output-bin.left" = "Left"; |
| // TRANSLATORS: Mailbox 1 |
| "output-bin.mailbox-1" = "Mailbox 1"; |
| // TRANSLATORS: Mailbox 10 |
| "output-bin.mailbox-10" = "Mailbox 10"; |
| // TRANSLATORS: Mailbox 2 |
| "output-bin.mailbox-2" = "Mailbox 2"; |
| // TRANSLATORS: Mailbox 3 |
| "output-bin.mailbox-3" = "Mailbox 3"; |
| // TRANSLATORS: Mailbox 4 |
| "output-bin.mailbox-4" = "Mailbox 4"; |
| // TRANSLATORS: Mailbox 5 |
| "output-bin.mailbox-5" = "Mailbox 5"; |
| // TRANSLATORS: Mailbox 6 |
| "output-bin.mailbox-6" = "Mailbox 6"; |
| // TRANSLATORS: Mailbox 7 |
| "output-bin.mailbox-7" = "Mailbox 7"; |
| // TRANSLATORS: Mailbox 8 |
| "output-bin.mailbox-8" = "Mailbox 8"; |
| // TRANSLATORS: Mailbox 9 |
| "output-bin.mailbox-9" = "Mailbox 9"; |
| // TRANSLATORS: Middle |
| "output-bin.middle" = "Middle"; |
| // TRANSLATORS: My Mailbox |
| "output-bin.my-mailbox" = "My Mailbox"; |
| // TRANSLATORS: Rear |
| "output-bin.rear" = "Rear"; |
| // TRANSLATORS: Right |
| "output-bin.right" = "Right"; |
| // TRANSLATORS: Side |
| "output-bin.side" = "Side"; |
| // TRANSLATORS: Stacker 1 |
| "output-bin.stacker-1" = "Stacker 1"; |
| // TRANSLATORS: Stacker 10 |
| "output-bin.stacker-10" = "Stacker 10"; |
| // TRANSLATORS: Stacker 2 |
| "output-bin.stacker-2" = "Stacker 2"; |
| // TRANSLATORS: Stacker 3 |
| "output-bin.stacker-3" = "Stacker 3"; |
| // TRANSLATORS: Stacker 4 |
| "output-bin.stacker-4" = "Stacker 4"; |
| // TRANSLATORS: Stacker 5 |
| "output-bin.stacker-5" = "Stacker 5"; |
| // TRANSLATORS: Stacker 6 |
| "output-bin.stacker-6" = "Stacker 6"; |
| // TRANSLATORS: Stacker 7 |
| "output-bin.stacker-7" = "Stacker 7"; |
| // TRANSLATORS: Stacker 8 |
| "output-bin.stacker-8" = "Stacker 8"; |
| // TRANSLATORS: Stacker 9 |
| "output-bin.stacker-9" = "Stacker 9"; |
| // TRANSLATORS: Top |
| "output-bin.top" = "Top"; |
| // TRANSLATORS: Tray 1 |
| "output-bin.tray-1" = "Tray 1"; |
| // TRANSLATORS: Tray 10 |
| "output-bin.tray-10" = "Tray 10"; |
| // TRANSLATORS: Tray 2 |
| "output-bin.tray-2" = "Tray 2"; |
| // TRANSLATORS: Tray 3 |
| "output-bin.tray-3" = "Tray 3"; |
| // TRANSLATORS: Tray 4 |
| "output-bin.tray-4" = "Tray 4"; |
| // TRANSLATORS: Tray 5 |
| "output-bin.tray-5" = "Tray 5"; |
| // TRANSLATORS: Tray 6 |
| "output-bin.tray-6" = "Tray 6"; |
| // TRANSLATORS: Tray 7 |
| "output-bin.tray-7" = "Tray 7"; |
| // TRANSLATORS: Tray 8 |
| "output-bin.tray-8" = "Tray 8"; |
| // TRANSLATORS: Tray 9 |
| "output-bin.tray-9" = "Tray 9"; |
| // TRANSLATORS: Scanned Image Quality |
| "output-compression-quality-factor" = "Scanned Image Quality"; |
| // TRANSLATORS: Page Delivery |
| "page-delivery" = "Page Delivery"; |
| // TRANSLATORS: Reverse Order Face-down |
| "page-delivery.reverse-order-face-down" = "Reverse Order Face-down"; |
| // TRANSLATORS: Reverse Order Face-up |
| "page-delivery.reverse-order-face-up" = "Reverse Order Face-up"; |
| // TRANSLATORS: Same Order Face-down |
| "page-delivery.same-order-face-down" = "Same Order Face-down"; |
| // TRANSLATORS: Same Order Face-up |
| "page-delivery.same-order-face-up" = "Same Order Face-up"; |
| // TRANSLATORS: System Specified |
| "page-delivery.system-specified" = "System Specified"; |
| // TRANSLATORS: Page Order Received |
| "page-order-received" = "Page Order Received"; |
| // TRANSLATORS: 1 To N |
| "page-order-received.1-to-n-order" = "1 To N"; |
| // TRANSLATORS: N To 1 |
| "page-order-received.n-to-1-order" = "N To 1"; |
| // TRANSLATORS: Page Ranges |
| "page-ranges" = "Page Ranges"; |
| // TRANSLATORS: Pages |
| "pages" = "Pages"; |
| // TRANSLATORS: Pages Per Subset |
| "pages-per-subset" = "Pages Per Subset"; |
| // TRANSLATORS: Pclm Raster Back Side |
| "pclm-raster-back-side" = "Pclm Raster Back Side"; |
| // TRANSLATORS: Flipped |
| "pclm-raster-back-side.flipped" = "Flipped"; |
| // TRANSLATORS: Normal |
| "pclm-raster-back-side.normal" = "Normal"; |
| // TRANSLATORS: Rotated |
| "pclm-raster-back-side.rotated" = "Rotated"; |
| // TRANSLATORS: Pclm Source Resolution |
| "pclm-source-resolution" = "Pclm Source Resolution"; |
| "pending" = "pending"; |
| // TRANSLATORS: Platform Shape |
| "platform-shape" = "Platform Shape"; |
| // TRANSLATORS: Round |
| "platform-shape.ellipse" = "Round"; |
| // TRANSLATORS: Rectangle |
| "platform-shape.rectangle" = "Rectangle"; |
| // TRANSLATORS: Platform Temperature |
| "platform-temperature" = "Platform Temperature"; |
| // TRANSLATORS: Post-dial String |
| "post-dial-string" = "Post-dial String"; |
| "ppdc: Adding include directory \"%s\"." = "ppdc: Adding include directory “%s”."; |
| "ppdc: Adding/updating UI text from %s." = "ppdc: Adding/updating UI text from %s."; |
| "ppdc: Bad boolean value (%s) on line %d of %s." = "ppdc: Bad boolean value (%s) on line %d of %s."; |
| "ppdc: Bad font attribute: %s" = "ppdc: Bad font attribute: %s"; |
| "ppdc: Bad resolution name \"%s\" on line %d of %s." = "ppdc: Bad resolution name “%s” on line %d of %s."; |
| "ppdc: Bad status keyword %s on line %d of %s." = "ppdc: Bad status keyword %s on line %d of %s."; |
| "ppdc: Bad variable substitution ($%c) on line %d of %s." = "ppdc: Bad variable substitution ($%c) on line %d of %s."; |
| "ppdc: Choice found on line %d of %s with no Option." = "ppdc: Choice found on line %d of %s with no Option."; |
| "ppdc: Duplicate #po for locale %s on line %d of %s." = "ppdc: Duplicate #po for locale %s on line %d of %s."; |
| "ppdc: Expected a filter definition on line %d of %s." = "ppdc: Expected a filter definition on line %d of %s."; |
| "ppdc: Expected a program name on line %d of %s." = "ppdc: Expected a program name on line %d of %s."; |
| "ppdc: Expected boolean value on line %d of %s." = "ppdc: Expected boolean value on line %d of %s."; |
| "ppdc: Expected charset after Font on line %d of %s." = "ppdc: Expected charset after Font on line %d of %s."; |
| "ppdc: Expected choice code on line %d of %s." = "ppdc: Expected choice code on line %d of %s."; |
| "ppdc: Expected choice name/text on line %d of %s." = "ppdc: Expected choice name/text on line %d of %s."; |
| "ppdc: Expected color order for ColorModel on line %d of %s." = "ppdc: Expected color order for ColorModel on line %d of %s."; |
| "ppdc: Expected colorspace for ColorModel on line %d of %s." = "ppdc: Expected colorspace for ColorModel on line %d of %s."; |
| "ppdc: Expected compression for ColorModel on line %d of %s." = "ppdc: Expected compression for ColorModel on line %d of %s."; |
| "ppdc: Expected constraints string for UIConstraints on line %d of %s." = "ppdc: Expected constraints string for UIConstraints on line %d of %s."; |
| "ppdc: Expected driver type keyword following DriverType on line %d of %s." = "ppdc: Expected driver type keyword following DriverType on line %d of %s."; |
| "ppdc: Expected duplex type after Duplex on line %d of %s." = "ppdc: Expected duplex type after Duplex on line %d of %s."; |
| "ppdc: Expected encoding after Font on line %d of %s." = "ppdc: Expected encoding after Font on line %d of %s."; |
| "ppdc: Expected filename after #po %s on line %d of %s." = "ppdc: Expected filename after #po %s on line %d of %s."; |
| "ppdc: Expected group name/text on line %d of %s." = "ppdc: Expected group name/text on line %d of %s."; |
| "ppdc: Expected include filename on line %d of %s." = "ppdc: Expected include filename on line %d of %s."; |
| "ppdc: Expected integer on line %d of %s." = "ppdc: Expected integer on line %d of %s."; |
| "ppdc: Expected locale after #po on line %d of %s." = "ppdc: Expected locale after #po on line %d of %s."; |
| "ppdc: Expected name after %s on line %d of %s." = "ppdc: Expected name after %s on line %d of %s."; |
| "ppdc: Expected name after FileName on line %d of %s." = "ppdc: Expected name after FileName on line %d of %s."; |
| "ppdc: Expected name after Font on line %d of %s." = "ppdc: Expected name after Font on line %d of %s."; |
| "ppdc: Expected name after Manufacturer on line %d of %s." = "ppdc: Expected name after Manufacturer on line %d of %s."; |
| "ppdc: Expected name after MediaSize on line %d of %s." = "ppdc: Expected name after MediaSize on line %d of %s."; |
| "ppdc: Expected name after ModelName on line %d of %s." = "ppdc: Expected name after ModelName on line %d of %s."; |
| "ppdc: Expected name after PCFileName on line %d of %s." = "ppdc: Expected name after PCFileName on line %d of %s."; |
| "ppdc: Expected name/text after %s on line %d of %s." = "ppdc: Expected name/text after %s on line %d of %s."; |
| "ppdc: Expected name/text after Installable on line %d of %s." = "ppdc: Expected name/text after Installable on line %d of %s."; |
| "ppdc: Expected name/text after Resolution on line %d of %s." = "ppdc: Expected name/text after Resolution on line %d of %s."; |
| "ppdc: Expected name/text combination for ColorModel on line %d of %s." = "ppdc: Expected name/text combination for ColorModel on line %d of %s."; |
| "ppdc: Expected option name/text on line %d of %s." = "ppdc: Expected option name/text on line %d of %s."; |
| "ppdc: Expected option section on line %d of %s." = "ppdc: Expected option section on line %d of %s."; |
| "ppdc: Expected option type on line %d of %s." = "ppdc: Expected option type on line %d of %s."; |
| "ppdc: Expected override field after Resolution on line %d of %s." = "ppdc: Expected override field after Resolution on line %d of %s."; |
| "ppdc: Expected quoted string on line %d of %s." = "ppdc: Expected quoted string on line %d of %s."; |
| "ppdc: Expected real number on line %d of %s." = "ppdc: Expected real number on line %d of %s."; |
| "ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s."; |
| "ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s."; |
| "ppdc: Expected selector after %s on line %d of %s." = "ppdc: Expected selector after %s on line %d of %s."; |
| "ppdc: Expected status after Font on line %d of %s." = "ppdc: Expected status after Font on line %d of %s."; |
| "ppdc: Expected string after Copyright on line %d of %s." = "ppdc: Expected string after Copyright on line %d of %s."; |
| "ppdc: Expected string after Version on line %d of %s." = "ppdc: Expected string after Version on line %d of %s."; |
| "ppdc: Expected two option names on line %d of %s." = "ppdc: Expected two option names on line %d of %s."; |
| "ppdc: Expected value after %s on line %d of %s." = "ppdc: Expected value after %s on line %d of %s."; |
| "ppdc: Expected version after Font on line %d of %s." = "ppdc: Expected version after Font on line %d of %s."; |
| "ppdc: Invalid #include/#po filename \"%s\"." = "ppdc: Invalid #include/#po filename “%s”."; |
| "ppdc: Invalid cost for filter on line %d of %s." = "ppdc: Invalid cost for filter on line %d of %s."; |
| "ppdc: Invalid empty MIME type for filter on line %d of %s." = "ppdc: Invalid empty MIME type for filter on line %d of %s."; |
| "ppdc: Invalid empty program name for filter on line %d of %s." = "ppdc: Invalid empty program name for filter on line %d of %s."; |
| "ppdc: Invalid option section \"%s\" on line %d of %s." = "ppdc: Invalid option section “%s” on line %d of %s."; |
| "ppdc: Invalid option type \"%s\" on line %d of %s." = "ppdc: Invalid option type “%s” on line %d of %s."; |
| "ppdc: Loading driver information file \"%s\"." = "ppdc: Loading driver information file “%s”."; |
| "ppdc: Loading messages for locale \"%s\"." = "ppdc: Loading messages for locale “%s”."; |
| "ppdc: Loading messages from \"%s\"." = "ppdc: Loading messages from “%s”."; |
| "ppdc: Missing #endif at end of \"%s\"." = "ppdc: Missing #endif at end of “%s”."; |
| "ppdc: Missing #if on line %d of %s." = "ppdc: Missing #if on line %d of %s."; |
| "ppdc: Need a msgid line before any translation strings on line %d of %s." = "ppdc: Need a msgid line before any translation strings on line %d of %s."; |
| "ppdc: No message catalog provided for locale %s." = "ppdc: No message catalog provided for locale %s."; |
| "ppdc: Option %s defined in two different groups on line %d of %s." = "ppdc: Option %s defined in two different groups on line %d of %s."; |
| "ppdc: Option %s redefined with a different type on line %d of %s." = "ppdc: Option %s redefined with a different type on line %d of %s."; |
| "ppdc: Option constraint must *name on line %d of %s." = "ppdc: Option constraint must *name on line %d of %s."; |
| "ppdc: Too many nested #if's on line %d of %s." = "ppdc: Too many nested #if’s on line %d of %s."; |
| "ppdc: Unable to create PPD file \"%s\" - %s." = "ppdc: Unable to create PPD file “%s” - %s."; |
| "ppdc: Unable to create output directory %s: %s" = "ppdc: Unable to create output directory %s: %s"; |
| "ppdc: Unable to create output pipes: %s" = "ppdc: Unable to create output pipes: %s"; |
| "ppdc: Unable to execute cupstestppd: %s" = "ppdc: Unable to execute cupstestppd: %s"; |
| "ppdc: Unable to find #po file %s on line %d of %s." = "ppdc: Unable to find #po file %s on line %d of %s."; |
| "ppdc: Unable to find include file \"%s\" on line %d of %s." = "ppdc: Unable to find include file “%s” on line %d of %s."; |
| "ppdc: Unable to find localization for \"%s\" - %s" = "ppdc: Unable to find localization for “%s” - %s"; |
| "ppdc: Unable to load localization file \"%s\" - %s" = "ppdc: Unable to load localization file “%s” - %s"; |
| "ppdc: Unable to open %s: %s" = "ppdc: Unable to open %s: %s"; |
| "ppdc: Undefined variable (%s) on line %d of %s." = "ppdc: Undefined variable (%s) on line %d of %s."; |
| "ppdc: Unexpected text on line %d of %s." = "ppdc: Unexpected text on line %d of %s."; |
| "ppdc: Unknown driver type %s on line %d of %s." = "ppdc: Unknown driver type %s on line %d of %s."; |
| "ppdc: Unknown duplex type \"%s\" on line %d of %s." = "ppdc: Unknown duplex type “%s” on line %d of %s."; |
| "ppdc: Unknown media size \"%s\" on line %d of %s." = "ppdc: Unknown media size “%s” on line %d of %s."; |
| "ppdc: Unknown message catalog format for \"%s\"." = "ppdc: Unknown message catalog format for “%s”."; |
| "ppdc: Unknown token \"%s\" seen on line %d of %s." = "ppdc: Unknown token “%s” seen on line %d of %s."; |
| "ppdc: Unknown trailing characters in real number \"%s\" on line %d of %s." = "ppdc: Unknown trailing characters in real number “%s” on line %d of %s."; |
| "ppdc: Unterminated string starting with %c on line %d of %s." = "ppdc: Unterminated string starting with %c on line %d of %s."; |
| "ppdc: Warning - overlapping filename \"%s\"." = "ppdc: Warning - overlapping filename “%s”."; |
| "ppdc: Writing %s." = "ppdc: Writing %s."; |
| "ppdc: Writing PPD files to directory \"%s\"." = "ppdc: Writing PPD files to directory “%s”."; |
| "ppdmerge: Bad LanguageVersion \"%s\" in %s." = "ppdmerge: Bad LanguageVersion “%s” in %s."; |
| "ppdmerge: Ignoring PPD file %s." = "ppdmerge: Ignoring PPD file %s."; |
| "ppdmerge: Unable to backup %s to %s - %s" = "ppdmerge: Unable to backup %s to %s - %s"; |
| // TRANSLATORS: Pre-dial String |
| "pre-dial-string" = "Pre-dial String"; |
| // TRANSLATORS: Number-Up Layout |
| "presentation-direction-number-up" = "Number-Up Layout"; |
| // TRANSLATORS: Top-bottom, Right-left |
| "presentation-direction-number-up.tobottom-toleft" = "Top-bottom, Right-left"; |
| // TRANSLATORS: Top-bottom, Left-right |
| "presentation-direction-number-up.tobottom-toright" = "Top-bottom, Left-right"; |
| // TRANSLATORS: Right-left, Top-bottom |
| "presentation-direction-number-up.toleft-tobottom" = "Right-left, Top-bottom"; |
| // TRANSLATORS: Right-left, Bottom-top |
| "presentation-direction-number-up.toleft-totop" = "Right-left, Bottom-top"; |
| // TRANSLATORS: Left-right, Top-bottom |
| "presentation-direction-number-up.toright-tobottom" = "Left-right, Top-bottom"; |
| // TRANSLATORS: Left-right, Bottom-top |
| "presentation-direction-number-up.toright-totop" = "Left-right, Bottom-top"; |
| // TRANSLATORS: Bottom-top, Right-left |
| "presentation-direction-number-up.totop-toleft" = "Bottom-top, Right-left"; |
| // TRANSLATORS: Bottom-top, Left-right |
| "presentation-direction-number-up.totop-toright" = "Bottom-top, Left-right"; |
| // TRANSLATORS: Print Accuracy |
| "print-accuracy" = "Print Accuracy"; |
| // TRANSLATORS: Print Base |
| "print-base" = "Print Base"; |
| // TRANSLATORS: Print Base Actual |
| "print-base-actual" = "Print Base Actual"; |
| // TRANSLATORS: Brim |
| "print-base.brim" = "Brim"; |
| // TRANSLATORS: None |
| "print-base.none" = "None"; |
| // TRANSLATORS: Raft |
| "print-base.raft" = "Raft"; |
| // TRANSLATORS: Skirt |
| "print-base.skirt" = "Skirt"; |
| // TRANSLATORS: Standard |
| "print-base.standard" = "Standard"; |
| // TRANSLATORS: Print Color Mode |
| "print-color-mode" = "Print Color Mode"; |
| // TRANSLATORS: Automatic |
| "print-color-mode.auto" = "Automatic"; |
| // TRANSLATORS: Auto Monochrome |
| "print-color-mode.auto-monochrome" = "Auto Monochrome"; |
| // TRANSLATORS: Text |
| "print-color-mode.bi-level" = "Text"; |
| // TRANSLATORS: Color |
| "print-color-mode.color" = "Color"; |
| // TRANSLATORS: Highlight |
| "print-color-mode.highlight" = "Highlight"; |
| // TRANSLATORS: Monochrome |
| "print-color-mode.monochrome" = "Monochrome"; |
| // TRANSLATORS: Process Text |
| "print-color-mode.process-bi-level" = "Process Text"; |
| // TRANSLATORS: Process Monochrome |
| "print-color-mode.process-monochrome" = "Process Monochrome"; |
| // TRANSLATORS: Print Optimization |
| "print-content-optimize" = "Print Optimization"; |
| // TRANSLATORS: Print Content Optimize Actual |
| "print-content-optimize-actual" = "Print Optimization"; |
| // TRANSLATORS: Automatic |
| "print-content-optimize.auto" = "Automatic"; |
| // TRANSLATORS: Graphics |
| "print-content-optimize.graphic" = "Graphics"; |
| // TRANSLATORS: Graphics |
| "print-content-optimize.graphics" = "Graphics"; |
| // TRANSLATORS: Photo |
| "print-content-optimize.photo" = "Photo"; |
| // TRANSLATORS: Text |
| "print-content-optimize.text" = "Text"; |
| // TRANSLATORS: Text and Graphics |
| "print-content-optimize.text-and-graphic" = "Text and Graphics"; |
| // TRANSLATORS: Text And Graphics |
| "print-content-optimize.text-and-graphics" = "Text and Graphics"; |
| // TRANSLATORS: Print Objects |
| "print-objects" = "Print Objects"; |
| // TRANSLATORS: Print Quality |
| "print-quality" = "Print Quality"; |
| // TRANSLATORS: Draft |
| "print-quality.3" = "Draft"; |
| // TRANSLATORS: Normal |
| "print-quality.4" = "Normal"; |
| // TRANSLATORS: High |
| "print-quality.5" = "High"; |
| // TRANSLATORS: Print Rendering Intent |
| "print-rendering-intent" = "Print Rendering Intent"; |
| // TRANSLATORS: Absolute |
| "print-rendering-intent.absolute" = "Absolute"; |
| // TRANSLATORS: Automatic |
| "print-rendering-intent.auto" = "Automatic"; |
| // TRANSLATORS: Perceptual |
| "print-rendering-intent.perceptual" = "Perceptual"; |
| // TRANSLATORS: Relative |
| "print-rendering-intent.relative" = "Relative"; |
| // TRANSLATORS: Relative w/Black Point Compensation |
| "print-rendering-intent.relative-bpc" = "Relative w/Black Point Compensation"; |
| // TRANSLATORS: Saturation |
| "print-rendering-intent.saturation" = "Saturation"; |
| // TRANSLATORS: Print Scaling |
| "print-scaling" = "Print Scaling"; |
| // TRANSLATORS: Automatic |
| "print-scaling.auto" = "Automatic"; |
| // TRANSLATORS: Auto-fit |
| "print-scaling.auto-fit" = "Auto-fit"; |
| // TRANSLATORS: Fill |
| "print-scaling.fill" = "Fill"; |
| // TRANSLATORS: Fit |
| "print-scaling.fit" = "Fit"; |
| // TRANSLATORS: None |
| "print-scaling.none" = "None"; |
| // TRANSLATORS: Print Supports |
| "print-supports" = "Print Supports"; |
| // TRANSLATORS: Print Supports Actual |
| "print-supports-actual" = "Print Supports Actual"; |
| // TRANSLATORS: With Specified Material |
| "print-supports.material" = "With Specified Material"; |
| // TRANSLATORS: None |
| "print-supports.none" = "None"; |
| // TRANSLATORS: Standard |
| "print-supports.standard" = "Standard"; |
| "printer %s disabled since %s -" = "printer %s disabled since %s -"; |
| "printer %s is holding new jobs. enabled since %s" = "printer %s is holding new jobs. enabled since %s"; |
| "printer %s is idle. enabled since %s" = "printer %s is idle. enabled since %s"; |
| "printer %s now printing %s-%d. enabled since %s" = "printer %s now printing %s-%d. enabled since %s"; |
| "printer %s/%s disabled since %s -" = "printer %s/%s disabled since %s -"; |
| "printer %s/%s is idle. enabled since %s" = "printer %s/%s is idle. enabled since %s"; |
| "printer %s/%s now printing %s-%d. enabled since %s" = "printer %s/%s now printing %s-%d. enabled since %s"; |
| // TRANSLATORS: Printer Kind |
| "printer-kind" = "Printer Kind"; |
| // TRANSLATORS: Disc |
| "printer-kind.disc" = "Disc"; |
| // TRANSLATORS: Document |
| "printer-kind.document" = "Document"; |
| // TRANSLATORS: Envelope |
| "printer-kind.envelope" = "Envelope"; |
| // TRANSLATORS: Label |
| "printer-kind.label" = "Label"; |
| // TRANSLATORS: Large Format |
| "printer-kind.large-format" = "Large format"; |
| // TRANSLATORS: Photo |
| "printer-kind.photo" = "Photo"; |
| // TRANSLATORS: Postcard |
| "printer-kind.postcard" = "Postcard"; |
| // TRANSLATORS: Receipt |
| "printer-kind.receipt" = "Receipt"; |
| // TRANSLATORS: Roll |
| "printer-kind.roll" = "Roll"; |
| // TRANSLATORS: Message From Operator |
| "printer-message-from-operator" = "Message From Operator"; |
| // TRANSLATORS: Print Resolution |
| "printer-resolution" = "Print Resolution"; |
| // TRANSLATORS: Printer State |
| "printer-state" = "Printer State"; |
| // TRANSLATORS: Detailed Printer State |
| "printer-state-reasons" = "Detailed Printer State"; |
| // TRANSLATORS: Old Alerts Have Been Removed |
| "printer-state-reasons.alert-removal-of-binary-change-entry" = "Old Alerts Have Been Removed"; |
| // TRANSLATORS: Bander Added |
| "printer-state-reasons.bander-added" = "Bander Added"; |
| // TRANSLATORS: Bander Almost Empty |
| "printer-state-reasons.bander-almost-empty" = "Bander Almost Empty"; |
| // TRANSLATORS: Bander Almost Full |
| "printer-state-reasons.bander-almost-full" = "Bander Almost Full"; |
| // TRANSLATORS: Bander At Limit |
| "printer-state-reasons.bander-at-limit" = "Bander At Limit"; |
| // TRANSLATORS: Bander Closed |
| "printer-state-reasons.bander-closed" = "Bander Closed"; |
| // TRANSLATORS: Bander Configuration Change |
| "printer-state-reasons.bander-configuration-change" = "Bander Configuration Change"; |
| // TRANSLATORS: Bander Cover Closed |
| "printer-state-reasons.bander-cover-closed" = "Bander Cover Closed"; |
| // TRANSLATORS: Bander Cover Open |
| "printer-state-reasons.bander-cover-open" = "Bander Cover Open"; |
| // TRANSLATORS: Bander Empty |
| "printer-state-reasons.bander-empty" = "Bander Empty"; |
| // TRANSLATORS: Bander Full |
| "printer-state-reasons.bander-full" = "Bander Full"; |
| // TRANSLATORS: Bander Interlock Closed |
| "printer-state-reasons.bander-interlock-closed" = "Bander Interlock Closed"; |
| // TRANSLATORS: Bander Interlock Open |
| "printer-state-reasons.bander-interlock-open" = "Bander Interlock Open"; |
| // TRANSLATORS: Bander Jam |
| "printer-state-reasons.bander-jam" = "Bander Jam"; |
| // TRANSLATORS: Bander Life Almost Over |
| "printer-state-reasons.bander-life-almost-over" = "Bander Life Almost Over"; |
| // TRANSLATORS: Bander Life Over |
| "printer-state-reasons.bander-life-over" = "Bander Life Over"; |
| // TRANSLATORS: Bander Memory Exhausted |
| "printer-state-reasons.bander-memory-exhausted" = "Bander Memory Exhausted"; |
| // TRANSLATORS: Bander Missing |
| "printer-state-reasons.bander-missing" = "Bander Missing"; |
| // TRANSLATORS: Bander Motor Failure |
| "printer-state-reasons.bander-motor-failure" = "Bander Motor Failure"; |
| // TRANSLATORS: Bander Near Limit |
| "printer-state-reasons.bander-near-limit" = "Bander Near Limit"; |
| // TRANSLATORS: Bander Offline |
| "printer-state-reasons.bander-offline" = "Bander Offline"; |
| // TRANSLATORS: Bander Opened |
| "printer-state-reasons.bander-opened" = "Bander Opened"; |
| // TRANSLATORS: Bander Over Temperature |
| "printer-state-reasons.bander-over-temperature" = "Bander Over Temperature"; |
| // TRANSLATORS: Bander Power Saver |
| "printer-state-reasons.bander-power-saver" = "Bander Power Saver"; |
| // TRANSLATORS: Bander Recoverable Failure |
| "printer-state-reasons.bander-recoverable-failure" = "Bander Recoverable Failure"; |
| // TRANSLATORS: Bander Recoverable Storage |
| "printer-state-reasons.bander-recoverable-storage" = "Bander Recoverable Storage"; |
| // TRANSLATORS: Bander Removed |
| "printer-state-reasons.bander-removed" = "Bander Removed"; |
| // TRANSLATORS: Bander Resource Added |
| "printer-state-reasons.bander-resource-added" = "Bander Resource Added"; |
| // TRANSLATORS: Bander Resource Removed |
| "printer-state-reasons.bander-resource-removed" = "Bander Resource Removed"; |
| // TRANSLATORS: Bander Thermistor Failure |
| "printer-state-reasons.bander-thermistor-failure" = "Bander Thermistor Failure"; |
| // TRANSLATORS: Bander Timing Failure |
| "printer-state-reasons.bander-timing-failure" = "Bander Timing Failure"; |
| // TRANSLATORS: Bander Turned Off |
| "printer-state-reasons.bander-turned-off" = "Bander Turned Off"; |
| // TRANSLATORS: Bander Turned On |
| "printer-state-reasons.bander-turned-on" = "Bander Turned On"; |
| // TRANSLATORS: Bander Under Temperature |
| "printer-state-reasons.bander-under-temperature" = "Bander Under Temperature"; |
| // TRANSLATORS: Bander Unrecoverable Failure |
| "printer-state-reasons.bander-unrecoverable-failure" = "Bander Unrecoverable Failure"; |
| // TRANSLATORS: Bander Unrecoverable Storage Error |
| "printer-state-reasons.bander-unrecoverable-storage-error" = "Bander Unrecoverable Storage Error"; |
| // TRANSLATORS: Bander Warming Up |
| "printer-state-reasons.bander-warming-up" = "Bander Warming Up"; |
| // TRANSLATORS: Binder Added |
| "printer-state-reasons.binder-added" = "Binder Added"; |
| // TRANSLATORS: Binder Almost Empty |
| "printer-state-reasons.binder-almost-empty" = "Binder Almost Empty"; |
| // TRANSLATORS: Binder Almost Full |
| "printer-state-reasons.binder-almost-full" = "Binder Almost Full"; |
| // TRANSLATORS: Binder At Limit |
| "printer-state-reasons.binder-at-limit" = "Binder At Limit"; |
| // TRANSLATORS: Binder Closed |
| "printer-state-reasons.binder-closed" = "Binder Closed"; |
| // TRANSLATORS: Binder Configuration Change |
| "printer-state-reasons.binder-configuration-change" = "Binder Configuration Change"; |
| // TRANSLATORS: Binder Cover Closed |
| "printer-state-reasons.binder-cover-closed" = "Binder Cover Closed"; |
| // TRANSLATORS: Binder Cover Open |
| "printer-state-reasons.binder-cover-open" = "Binder Cover Open"; |
| // TRANSLATORS: Binder Empty |
| "printer-state-reasons.binder-empty" = "Binder Empty"; |
| // TRANSLATORS: Binder Full |
| "printer-state-reasons.binder-full" = "Binder Full"; |
| // TRANSLATORS: Binder Interlock Closed |
| "printer-state-reasons.binder-interlock-closed" = "Binder Interlock Closed"; |
| // TRANSLATORS: Binder Interlock Open |
| "printer-state-reasons.binder-interlock-open" = "Binder Interlock Open"; |
| // TRANSLATORS: Binder Jam |
| "printer-state-reasons.binder-jam" = "Binder Jam"; |
| // TRANSLATORS: Binder Life Almost Over |
| "printer-state-reasons.binder-life-almost-over" = "Binder Life Almost Over"; |
| // TRANSLATORS: Binder Life Over |
| "printer-state-reasons.binder-life-over" = "Binder Life Over"; |
| // TRANSLATORS: Binder Memory Exhausted |
| "printer-state-reasons.binder-memory-exhausted" = "Binder Memory Exhausted"; |
| // TRANSLATORS: Binder Missing |
| "printer-state-reasons.binder-missing" = "Binder Missing"; |
| // TRANSLATORS: Binder Motor Failure |
| "printer-state-reasons.binder-motor-failure" = "Binder Motor Failure"; |
| // TRANSLATORS: Binder Near Limit |
| "printer-state-reasons.binder-near-limit" = "Binder Near Limit"; |
| // TRANSLATORS: Binder Offline |
| "printer-state-reasons.binder-offline" = "Binder Offline"; |
| // TRANSLATORS: Binder Opened |
| "printer-state-reasons.binder-opened" = "Binder Opened"; |
| // TRANSLATORS: Binder Over Temperature |
| "printer-state-reasons.binder-over-temperature" = "Binder Over Temperature"; |
| // TRANSLATORS: Binder Power Saver |
| "printer-state-reasons.binder-power-saver" = "Binder Power Saver"; |
| // TRANSLATORS: Binder Recoverable Failure |
| "printer-state-reasons.binder-recoverable-failure" = "Binder Recoverable Failure"; |
| // TRANSLATORS: Binder Recoverable Storage |
| "printer-state-reasons.binder-recoverable-storage" = "Binder Recoverable Storage"; |
| // TRANSLATORS: Binder Removed |
| "printer-state-reasons.binder-removed" = "Binder Removed"; |
| // TRANSLATORS: Binder Resource Added |
| "printer-state-reasons.binder-resource-added" = "Binder Resource Added"; |
| // TRANSLATORS: Binder Resource Removed |
| "printer-state-reasons.binder-resource-removed" = "Binder Resource Removed"; |
| // TRANSLATORS: Binder Thermistor Failure |
| "printer-state-reasons.binder-thermistor-failure" = "Binder Thermistor Failure"; |
| // TRANSLATORS: Binder Timing Failure |
| "printer-state-reasons.binder-timing-failure" = "Binder Timing Failure"; |
| // TRANSLATORS: Binder Turned Off |
| "printer-state-reasons.binder-turned-off" = "Binder Turned Off"; |
| // TRANSLATORS: Binder Turned On |
| "printer-state-reasons.binder-turned-on" = "Binder Turned On"; |
| // TRANSLATORS: Binder Under Temperature |
| "printer-state-reasons.binder-under-temperature" = "Binder Under Temperature"; |
| // TRANSLATORS: Binder Unrecoverable Failure |
| "printer-state-reasons.binder-unrecoverable-failure" = "Binder Unrecoverable Failure"; |
| // TRANSLATORS: Binder Unrecoverable Storage Error |
| "printer-state-reasons.binder-unrecoverable-storage-error" = "Binder Unrecoverable Storage Error"; |
| // TRANSLATORS: Binder Warming Up |
| "printer-state-reasons.binder-warming-up" = "Binder Warming Up"; |
| // TRANSLATORS: Camera Failure |
| "printer-state-reasons.camera-failure" = "Camera Failure"; |
| // TRANSLATORS: Chamber Cooling |
| "printer-state-reasons.chamber-cooling" = "Chamber Cooling"; |
| // TRANSLATORS: Chamber Failure |
| "printer-state-reasons.chamber-failure" = "Chamber Failure"; |
| // TRANSLATORS: Chamber Heating |
| "printer-state-reasons.chamber-heating" = "Chamber Heating"; |
| // TRANSLATORS: Chamber Temperature High |
| "printer-state-reasons.chamber-temperature-high" = "Chamber Temperature High"; |
| // TRANSLATORS: Chamber Temperature Low |
| "printer-state-reasons.chamber-temperature-low" = "Chamber Temperature Low"; |
| // TRANSLATORS: Cleaner Life Almost Over |
| "printer-state-reasons.cleaner-life-almost-over" = "Cleaner Life Almost Over"; |
| // TRANSLATORS: Cleaner Life Over |
| "printer-state-reasons.cleaner-life-over" = "Cleaner Life Over"; |
| // TRANSLATORS: Configuration Change |
| "printer-state-reasons.configuration-change" = "Configuration Change"; |
| // TRANSLATORS: Connecting To Device |
| "printer-state-reasons.connecting-to-device" = "Connecting To Device"; |
| // TRANSLATORS: Cover Open |
| "printer-state-reasons.cover-open" = "Cover Open"; |
| // TRANSLATORS: Deactivated |
| "printer-state-reasons.deactivated" = "Deactivated"; |
| // TRANSLATORS: Developer Empty |
| "printer-state-reasons.developer-empty" = "Developer Empty"; |
| // TRANSLATORS: Developer Low |
| "printer-state-reasons.developer-low" = "Developer Low"; |
| // TRANSLATORS: Die Cutter Added |
| "printer-state-reasons.die-cutter-added" = "Die Cutter Added"; |
| // TRANSLATORS: Die Cutter Almost Empty |
| "printer-state-reasons.die-cutter-almost-empty" = "Die Cutter Almost Empty"; |
| // TRANSLATORS: Die Cutter Almost Full |
| "printer-state-reasons.die-cutter-almost-full" = "Die Cutter Almost Full"; |
| // TRANSLATORS: Die Cutter At Limit |
| "printer-state-reasons.die-cutter-at-limit" = "Die Cutter At Limit"; |
| // TRANSLATORS: Die Cutter Closed |
| "printer-state-reasons.die-cutter-closed" = "Die Cutter Closed"; |
| // TRANSLATORS: Die Cutter Configuration Change |
| "printer-state-reasons.die-cutter-configuration-change" = "Die Cutter Configuration Change"; |
| // TRANSLATORS: Die Cutter Cover Closed |
| "printer-state-reasons.die-cutter-cover-closed" = "Die Cutter Cover Closed"; |
| // TRANSLATORS: Die Cutter Cover Open |
| "printer-state-reasons.die-cutter-cover-open" = "Die Cutter Cover Open"; |
| // TRANSLATORS: Die Cutter Empty |
| "printer-state-reasons.die-cutter-empty" = "Die Cutter Empty"; |
| // TRANSLATORS: Die Cutter Full |
| "printer-state-reasons.die-cutter-full" = "Die Cutter Full"; |
| // TRANSLATORS: Die Cutter Interlock Closed |
| "printer-state-reasons.die-cutter-interlock-closed" = "Die Cutter Interlock Closed"; |
| // TRANSLATORS: Die Cutter Interlock Open |
| "printer-state-reasons.die-cutter-interlock-open" = "Die Cutter Interlock Open"; |
| // TRANSLATORS: Die Cutter Jam |
| "printer-state-reasons.die-cutter-jam" = "Die Cutter Jam"; |
| // TRANSLATORS: Die Cutter Life Almost Over |
| "printer-state-reasons.die-cutter-life-almost-over" = "Die Cutter Life Almost Over"; |
| // TRANSLATORS: Die Cutter Life Over |
| "printer-state-reasons.die-cutter-life-over" = "Die Cutter Life Over"; |
| // TRANSLATORS: Die Cutter Memory Exhausted |
| "printer-state-reasons.die-cutter-memory-exhausted" = "Die Cutter Memory Exhausted"; |
| // TRANSLATORS: Die Cutter Missing |
| "printer-state-reasons.die-cutter-missing" = "Die Cutter Missing"; |
| // TRANSLATORS: Die Cutter Motor Failure |
| "printer-state-reasons.die-cutter-motor-failure" = "Die Cutter Motor Failure"; |
| // TRANSLATORS: Die Cutter Near Limit |
| "printer-state-reasons.die-cutter-near-limit" = "Die Cutter Near Limit"; |
| // TRANSLATORS: Die Cutter Offline |
| "printer-state-reasons.die-cutter-offline" = "Die Cutter Offline"; |
| // TRANSLATORS: Die Cutter Opened |
| "printer-state-reasons.die-cutter-opened" = "Die Cutter Opened"; |
| // TRANSLATORS: Die Cutter Over Temperature |
| "printer-state-reasons.die-cutter-over-temperature" = "Die Cutter Over Temperature"; |
| // TRANSLATORS: Die Cutter Power Saver |
| "printer-state-reasons.die-cutter-power-saver" = "Die Cutter Power Saver"; |
| // TRANSLATORS: Die Cutter Recoverable Failure |
| "printer-state-reasons.die-cutter-recoverable-failure" = "Die Cutter Recoverable Failure"; |
| // TRANSLATORS: Die Cutter Recoverable Storage |
| "printer-state-reasons.die-cutter-recoverable-storage" = "Die Cutter Recoverable Storage"; |
| // TRANSLATORS: Die Cutter Removed |
| "printer-state-reasons.die-cutter-removed" = "Die Cutter Removed"; |
| // TRANSLATORS: Die Cutter Resource Added |
| "printer-state-reasons.die-cutter-resource-added" = "Die Cutter Resource Added"; |
| // TRANSLATORS: Die Cutter Resource Removed |
| "printer-state-reasons.die-cutter-resource-removed" = "Die Cutter Resource Removed"; |
| // TRANSLATORS: Die Cutter Thermistor Failure |
| "printer-state-reasons.die-cutter-thermistor-failure" = "Die Cutter Thermistor Failure"; |
| // TRANSLATORS: Die Cutter Timing Failure |
| "printer-state-reasons.die-cutter-timing-failure" = "Die Cutter Timing Failure"; |
| // TRANSLATORS: Die Cutter Turned Off |
| "printer-state-reasons.die-cutter-turned-off" = "Die Cutter Turned Off"; |
| // TRANSLATORS: Die Cutter Turned On |
| "printer-state-reasons.die-cutter-turned-on" = "Die Cutter Turned On"; |
| // TRANSLATORS: Die Cutter Under Temperature |
| "printer-state-reasons.die-cutter-under-temperature" = "Die Cutter Under Temperature"; |
| // TRANSLATORS: Die Cutter Unrecoverable Failure |
| "printer-state-reasons.die-cutter-unrecoverable-failure" = "Die Cutter Unrecoverable Failure"; |
| // TRANSLATORS: Die Cutter Unrecoverable Storage Error |
| "printer-state-reasons.die-cutter-unrecoverable-storage-error" = "Die Cutter Unrecoverable Storage Error"; |
| // TRANSLATORS: Die Cutter Warming Up |
| "printer-state-reasons.die-cutter-warming-up" = "Die Cutter Warming Up"; |
| // TRANSLATORS: Door Open |
| "printer-state-reasons.door-open" = "Door Open"; |
| // TRANSLATORS: Extruder Cooling |
| "printer-state-reasons.extruder-cooling" = "Extruder Cooling"; |
| // TRANSLATORS: Extruder Failure |
| "printer-state-reasons.extruder-failure" = "Extruder Failure"; |
| // TRANSLATORS: Extruder Heating |
| "printer-state-reasons.extruder-heating" = "Extruder Heating"; |
| // TRANSLATORS: Extruder Jam |
| "printer-state-reasons.extruder-jam" = "Extruder Jam"; |
| // TRANSLATORS: Extruder Temperature High |
| "printer-state-reasons.extruder-temperature-high" = "Extruder Temperature High"; |
| // TRANSLATORS: Extruder Temperature Low |
| "printer-state-reasons.extruder-temperature-low" = "Extruder Temperature Low"; |
| // TRANSLATORS: Fan Failure |
| "printer-state-reasons.fan-failure" = "Fan Failure"; |
| // TRANSLATORS: Fax Modem Life Almost Over |
| "printer-state-reasons.fax-modem-life-almost-over" = "Fax Modem Life Almost Over"; |
| // TRANSLATORS: Fax Modem Life Over |
| "printer-state-reasons.fax-modem-life-over" = "Fax Modem Life Over"; |
| // TRANSLATORS: Fax Modem Missing |
| "printer-state-reasons.fax-modem-missing" = "Fax Modem Missing"; |
| // TRANSLATORS: Fax Modem Turned Off |
| "printer-state-reasons.fax-modem-turned-off" = "Fax Modem Turned Off"; |
| // TRANSLATORS: Fax Modem Turned On |
| "printer-state-reasons.fax-modem-turned-on" = "Fax Modem Turned On"; |
| // TRANSLATORS: Folder Added |
| "printer-state-reasons.folder-added" = "Folder Added"; |
| // TRANSLATORS: Folder Almost Empty |
| "printer-state-reasons.folder-almost-empty" = "Folder Almost Empty"; |
| // TRANSLATORS: Folder Almost Full |
| "printer-state-reasons.folder-almost-full" = "Folder Almost Full"; |
| // TRANSLATORS: Folder At Limit |
| "printer-state-reasons.folder-at-limit" = "Folder At Limit"; |
| // TRANSLATORS: Folder Closed |
| "printer-state-reasons.folder-closed" = "Folder Closed"; |
| // TRANSLATORS: Folder Configuration Change |
| "printer-state-reasons.folder-configuration-change" = "Folder Configuration Change"; |
| // TRANSLATORS: Folder Cover Closed |
| "printer-state-reasons.folder-cover-closed" = "Folder Cover Closed"; |
| // TRANSLATORS: Folder Cover Open |
| "printer-state-reasons.folder-cover-open" = "Folder Cover Open"; |
| // TRANSLATORS: Folder Empty |
| "printer-state-reasons.folder-empty" = "Folder Empty"; |
| // TRANSLATORS: Folder Full |
| "printer-state-reasons.folder-full" = "Folder Full"; |
| // TRANSLATORS: Folder Interlock Closed |
| "printer-state-reasons.folder-interlock-closed" = "Folder Interlock Closed"; |
| // TRANSLATORS: Folder Interlock Open |
| "printer-state-reasons.folder-interlock-open" = "Folder Interlock Open"; |
| // TRANSLATORS: Folder Jam |
| "printer-state-reasons.folder-jam" = "Folder Jam"; |
| // TRANSLATORS: Folder Life Almost Over |
| "printer-state-reasons.folder-life-almost-over" = "Folder Life Almost Over"; |
| // TRANSLATORS: Folder Life Over |
| "printer-state-reasons.folder-life-over" = "Folder Life Over"; |
| // TRANSLATORS: Folder Memory Exhausted |
| "printer-state-reasons.folder-memory-exhausted" = "Folder Memory Exhausted"; |
| // TRANSLATORS: Folder Missing |
| "printer-state-reasons.folder-missing" = "Folder Missing"; |
| // TRANSLATORS: Folder Motor Failure |
| "printer-state-reasons.folder-motor-failure" = "Folder Motor Failure"; |
| // TRANSLATORS: Folder Near Limit |
| "printer-state-reasons.folder-near-limit" = "Folder Near Limit"; |
| // TRANSLATORS: Folder Offline |
| "printer-state-reasons.folder-offline" = "Folder Offline"; |
| // TRANSLATORS: Folder Opened |
| "printer-state-reasons.folder-opened" = "Folder Opened"; |
| // TRANSLATORS: Folder Over Temperature |
| "printer-state-reasons.folder-over-temperature" = "Folder Over Temperature"; |
| // TRANSLATORS: Folder Power Saver |
| "printer-state-reasons.folder-power-saver" = "Folder Power Saver"; |
| // TRANSLATORS: Folder Recoverable Failure |
| "printer-state-reasons.folder-recoverable-failure" = "Folder Recoverable Failure"; |
| // TRANSLATORS: Folder Recoverable Storage |
| "printer-state-reasons.folder-recoverable-storage" = "Folder Recoverable Storage"; |
| // TRANSLATORS: Folder Removed |
| "printer-state-reasons.folder-removed" = "Folder Removed"; |
| // TRANSLATORS: Folder Resource Added |
| "printer-state-reasons.folder-resource-added" = "Folder Resource Added"; |
| // TRANSLATORS: Folder Resource Removed |
| "printer-state-reasons.folder-resource-removed" = "Folder Resource Removed"; |
| // TRANSLATORS: Folder Thermistor Failure |
| "printer-state-reasons.folder-thermistor-failure" = "Folder Thermistor Failure"; |
| // TRANSLATORS: Folder Timing Failure |
| "printer-state-reasons.folder-timing-failure" = "Folder Timing Failure"; |
| // TRANSLATORS: Folder Turned Off |
| "printer-state-reasons.folder-turned-off" = "Folder Turned Off"; |
| // TRANSLATORS: Folder Turned On |
| "printer-state-reasons.folder-turned-on" = "Folder Turned On"; |
| // TRANSLATORS: Folder Under Temperature |
| "printer-state-reasons.folder-under-temperature" = "Folder Under Temperature"; |
| // TRANSLATORS: Folder Unrecoverable Failure |
| "printer-state-reasons.folder-unrecoverable-failure" = "Folder Unrecoverable Failure"; |
| // TRANSLATORS: Folder Unrecoverable Storage Error |
| "printer-state-reasons.folder-unrecoverable-storage-error" = "Folder Unrecoverable Storage Error"; |
| // TRANSLATORS: Folder Warming Up |
| "printer-state-reasons.folder-warming-up" = "Folder Warming Up"; |
| // TRANSLATORS: Fuser temperature high |
| "printer-state-reasons.fuser-over-temp" = "Fuser Over Temp"; |
| // TRANSLATORS: Fuser temperature low |
| "printer-state-reasons.fuser-under-temp" = "Fuser Under Temp"; |
| // TRANSLATORS: Hold New Jobs |
| "printer-state-reasons.hold-new-jobs" = "Hold New Jobs"; |
| // TRANSLATORS: Identify Printer |
| "printer-state-reasons.identify-printer-requested" = "Identify Printer"; |
| // TRANSLATORS: Imprinter Added |
| "printer-state-reasons.imprinter-added" = "Imprinter Added"; |
| // TRANSLATORS: Imprinter Almost Empty |
| "printer-state-reasons.imprinter-almost-empty" = "Imprinter Almost Empty"; |
| // TRANSLATORS: Imprinter Almost Full |
| "printer-state-reasons.imprinter-almost-full" = "Imprinter Almost Full"; |
| // TRANSLATORS: Imprinter At Limit |
| "printer-state-reasons.imprinter-at-limit" = "Imprinter At Limit"; |
| // TRANSLATORS: Imprinter Closed |
| "printer-state-reasons.imprinter-closed" = "Imprinter Closed"; |
| // TRANSLATORS: Imprinter Configuration Change |
| "printer-state-reasons.imprinter-configuration-change" = "Imprinter Configuration Change"; |
| // TRANSLATORS: Imprinter Cover Closed |
| "printer-state-reasons.imprinter-cover-closed" = "Imprinter Cover Closed"; |
| // TRANSLATORS: Imprinter Cover Open |
| "printer-state-reasons.imprinter-cover-open" = "Imprinter Cover Open"; |
| // TRANSLATORS: Imprinter Empty |
| "printer-state-reasons.imprinter-empty" = "Imprinter Empty"; |
| // TRANSLATORS: Imprinter Full |
| "printer-state-reasons.imprinter-full" = "Imprinter Full"; |
| // TRANSLATORS: Imprinter Interlock Closed |
| "printer-state-reasons.imprinter-interlock-closed" = "Imprinter Interlock Closed"; |
| // TRANSLATORS: Imprinter Interlock Open |
| "printer-state-reasons.imprinter-interlock-open" = "Imprinter Interlock Open"; |
| // TRANSLATORS: Imprinter Jam |
| "printer-state-reasons.imprinter-jam" = "Imprinter Jam"; |
| // TRANSLATORS: Imprinter Life Almost Over |
| "printer-state-reasons.imprinter-life-almost-over" = "Imprinter Life Almost Over"; |
| // TRANSLATORS: Imprinter Life Over |
| "printer-state-reasons.imprinter-life-over" = "Imprinter Life Over"; |
| // TRANSLATORS: Imprinter Memory Exhausted |
| "printer-state-reasons.imprinter-memory-exhausted" = "Imprinter Memory Exhausted"; |
| // TRANSLATORS: Imprinter Missing |
| "printer-state-reasons.imprinter-missing" = "Imprinter Missing"; |
| // TRANSLATORS: Imprinter Motor Failure |
| "printer-state-reasons.imprinter-motor-failure" = "Imprinter Motor Failure"; |
| // TRANSLATORS: Imprinter Near Limit |
| "printer-state-reasons.imprinter-near-limit" = "Imprinter Near Limit"; |
| // TRANSLATORS: Imprinter Offline |
| "printer-state-reasons.imprinter-offline" = "Imprinter Offline"; |
| // TRANSLATORS: Imprinter Opened |
| "printer-state-reasons.imprinter-opened" = "Imprinter Opened"; |
| // TRANSLATORS: Imprinter Over Temperature |
| "printer-state-reasons.imprinter-over-temperature" = "Imprinter Over Temperature"; |
| // TRANSLATORS: Imprinter Power Saver |
| "printer-state-reasons.imprinter-power-saver" = "Imprinter Power Saver"; |
| // TRANSLATORS: Imprinter Recoverable Failure |
| "printer-state-reasons.imprinter-recoverable-failure" = "Imprinter Recoverable Failure"; |
| // TRANSLATORS: Imprinter Recoverable Storage |
| "printer-state-reasons.imprinter-recoverable-storage" = "Imprinter Recoverable Storage"; |
| // TRANSLATORS: Imprinter Removed |
| "printer-state-reasons.imprinter-removed" = "Imprinter Removed"; |
| // TRANSLATORS: Imprinter Resource Added |
| "printer-state-reasons.imprinter-resource-added" = "Imprinter Resource Added"; |
| // TRANSLATORS: Imprinter Resource Removed |
| "printer-state-reasons.imprinter-resource-removed" = "Imprinter Resource Removed"; |
| // TRANSLATORS: Imprinter Thermistor Failure |
| "printer-state-reasons.imprinter-thermistor-failure" = "Imprinter Thermistor Failure"; |
| // TRANSLATORS: Imprinter Timing Failure |
| "printer-state-reasons.imprinter-timing-failure" = "Imprinter Timing Failure"; |
| // TRANSLATORS: Imprinter Turned Off |
| "printer-state-reasons.imprinter-turned-off" = "Imprinter Turned Off"; |
| // TRANSLATORS: Imprinter Turned On |
| "printer-state-reasons.imprinter-turned-on" = "Imprinter Turned On"; |
| // TRANSLATORS: Imprinter Under Temperature |
| "printer-state-reasons.imprinter-under-temperature" = "Imprinter Under Temperature"; |
| // TRANSLATORS: Imprinter Unrecoverable Failure |
| "printer-state-reasons.imprinter-unrecoverable-failure" = "Imprinter Unrecoverable Failure"; |
| // TRANSLATORS: Imprinter Unrecoverable Storage Error |
| "printer-state-reasons.imprinter-unrecoverable-storage-error" = "Imprinter Unrecoverable Storage Error"; |
| // TRANSLATORS: Imprinter Warming Up |
| "printer-state-reasons.imprinter-warming-up" = "Imprinter Warming Up"; |
| // TRANSLATORS: Input Cannot Feed Size Selected |
| "printer-state-reasons.input-cannot-feed-size-selected" = "Input Cannot Feed Size Selected"; |
| // TRANSLATORS: Input Manual Input Request |
| "printer-state-reasons.input-manual-input-request" = "Input Manual Input Request"; |
| // TRANSLATORS: Input Media Color Change |
| "printer-state-reasons.input-media-color-change" = "Input Media Color Change"; |
| // TRANSLATORS: Input Media Form Parts Change |
| "printer-state-reasons.input-media-form-parts-change" = "Input Media Form Parts Change"; |
| // TRANSLATORS: Input Media Size Change |
| "printer-state-reasons.input-media-size-change" = "Input Media Size Change"; |
| // TRANSLATORS: Input Media Tray Failure |
| "printer-state-reasons.input-media-tray-failure" = "Input Media Tray Failure"; |
| // TRANSLATORS: Input Media Tray Feed Error |
| "printer-state-reasons.input-media-tray-feed-error" = "Input Media Tray Feed Error"; |
| // TRANSLATORS: Input Media Tray Jam |
| "printer-state-reasons.input-media-tray-jam" = "Input Media Tray Jam"; |
| // TRANSLATORS: Input Media Type Change |
| "printer-state-reasons.input-media-type-change" = "Input Media Type Change"; |
| // TRANSLATORS: Input Media Weight Change |
| "printer-state-reasons.input-media-weight-change" = "Input Media Weight Change"; |
| // TRANSLATORS: Input Pick Roller Failure |
| "printer-state-reasons.input-pick-roller-failure" = "Input Pick Roller Failure"; |
| // TRANSLATORS: Input Pick Roller Life Over |
| "printer-state-reasons.input-pick-roller-life-over" = "Input Pick Roller Life Over"; |
| // TRANSLATORS: Input Pick Roller Life Warn |
| "printer-state-reasons.input-pick-roller-life-warn" = "Input Pick Roller Life Warn"; |
| // TRANSLATORS: Input Pick Roller Missing |
| "printer-state-reasons.input-pick-roller-missing" = "Input Pick Roller Missing"; |
| // TRANSLATORS: Input Tray Elevation Failure |
| "printer-state-reasons.input-tray-elevation-failure" = "Input Tray Elevation Failure"; |
| // TRANSLATORS: Paper tray is missing |
| "printer-state-reasons.input-tray-missing" = "Input Tray Missing"; |
| // TRANSLATORS: Input Tray Position Failure |
| "printer-state-reasons.input-tray-position-failure" = "Input Tray Position Failure"; |
| // TRANSLATORS: Inserter Added |
| "printer-state-reasons.inserter-added" = "Inserter Added"; |
| // TRANSLATORS: Inserter Almost Empty |
| "printer-state-reasons.inserter-almost-empty" = "Inserter Almost Empty"; |
| // TRANSLATORS: Inserter Almost Full |
| "printer-state-reasons.inserter-almost-full" = "Inserter Almost Full"; |
| // TRANSLATORS: Inserter At Limit |
| "printer-state-reasons.inserter-at-limit" = "Inserter At Limit"; |
| // TRANSLATORS: Inserter Closed |
| "printer-state-reasons.inserter-closed" = "Inserter Closed"; |
| // TRANSLATORS: Inserter Configuration Change |
| "printer-state-reasons.inserter-configuration-change" = "Inserter Configuration Change"; |
| // TRANSLATORS: Inserter Cover Closed |
| "printer-state-reasons.inserter-cover-closed" = "Inserter Cover Closed"; |
| // TRANSLATORS: Inserter Cover Open |
| "printer-state-reasons.inserter-cover-open" = "Inserter Cover Open"; |
| // TRANSLATORS: Inserter Empty |
| "printer-state-reasons.inserter-empty" = "Inserter Empty"; |
| // TRANSLATORS: Inserter Full |
| "printer-state-reasons.inserter-full" = "Inserter Full"; |
| // TRANSLATORS: Inserter Interlock Closed |
| "printer-state-reasons.inserter-interlock-closed" = "Inserter Interlock Closed"; |
| // TRANSLATORS: Inserter Interlock Open |
| "printer-state-reasons.inserter-interlock-open" = "Inserter Interlock Open"; |
| // TRANSLATORS: Inserter Jam |
| "printer-state-reasons.inserter-jam" = "Inserter Jam"; |
| // TRANSLATORS: Inserter Life Almost Over |
| "printer-state-reasons.inserter-life-almost-over" = "Inserter Life Almost Over"; |
| // TRANSLATORS: Inserter Life Over |
| "printer-state-reasons.inserter-life-over" = "Inserter Life Over"; |
| // TRANSLATORS: Inserter Memory Exhausted |
| "printer-state-reasons.inserter-memory-exhausted" = "Inserter Memory Exhausted"; |
| // TRANSLATORS: Inserter Missing |
| "printer-state-reasons.inserter-missing" = "Inserter Missing"; |
| // TRANSLATORS: Inserter Motor Failure |
| "printer-state-reasons.inserter-motor-failure" = "Inserter Motor Failure"; |
| // TRANSLATORS: Inserter Near Limit |
| "printer-state-reasons.inserter-near-limit" = "Inserter Near Limit"; |
| // TRANSLATORS: Inserter Offline |
| "printer-state-reasons.inserter-offline" = "Inserter Offline"; |
| // TRANSLATORS: Inserter Opened |
| "printer-state-reasons.inserter-opened" = "Inserter Opened"; |
| // TRANSLATORS: Inserter Over Temperature |
| "printer-state-reasons.inserter-over-temperature" = "Inserter Over Temperature"; |
| // TRANSLATORS: Inserter Power Saver |
| "printer-state-reasons.inserter-power-saver" = "Inserter Power Saver"; |
| // TRANSLATORS: Inserter Recoverable Failure |
| "printer-state-reasons.inserter-recoverable-failure" = "Inserter Recoverable Failure"; |
| // TRANSLATORS: Inserter Recoverable Storage |
| "printer-state-reasons.inserter-recoverable-storage" = "Inserter Recoverable Storage"; |
| // TRANSLATORS: Inserter Removed |
| "printer-state-reasons.inserter-removed" = "Inserter Removed"; |
| // TRANSLATORS: Inserter Resource Added |
| "printer-state-reasons.inserter-resource-added" = "Inserter Resource Added"; |
| // TRANSLATORS: Inserter Resource Removed |
| "printer-state-reasons.inserter-resource-removed" = "Inserter Resource Removed"; |
| // TRANSLATORS: Inserter Thermistor Failure |
| "printer-state-reasons.inserter-thermistor-failure" = "Inserter Thermistor Failure"; |
| // TRANSLATORS: Inserter Timing Failure |
| "printer-state-reasons.inserter-timing-failure" = "Inserter Timing Failure"; |
| // TRANSLATORS: Inserter Turned Off |
| "printer-state-reasons.inserter-turned-off" = "Inserter Turned Off"; |
| // TRANSLATORS: Inserter Turned On |
| "printer-state-reasons.inserter-turned-on" = "Inserter Turned On"; |
| // TRANSLATORS: Inserter Under Temperature |
| "printer-state-reasons.inserter-under-temperature" = "Inserter Under Temperature"; |
| // TRANSLATORS: Inserter Unrecoverable Failure |
| "printer-state-reasons.inserter-unrecoverable-failure" = "Inserter Unrecoverable Failure"; |
| // TRANSLATORS: Inserter Unrecoverable Storage Error |
| "printer-state-reasons.inserter-unrecoverable-storage-error" = "Inserter Unrecoverable Storage Error"; |
| // TRANSLATORS: Inserter Warming Up |
| "printer-state-reasons.inserter-warming-up" = "Inserter Warming Up"; |
| // TRANSLATORS: Interlock Closed |
| "printer-state-reasons.interlock-closed" = "Interlock Closed"; |
| // TRANSLATORS: Interlock Open |
| "printer-state-reasons.interlock-open" = "Interlock Open"; |
| // TRANSLATORS: Interpreter Cartridge Added |
| "printer-state-reasons.interpreter-cartridge-added" = "Interpreter Cartridge Added"; |
| // TRANSLATORS: Interpreter Cartridge Removed |
| "printer-state-reasons.interpreter-cartridge-deleted" = "Interpreter Cartridge Removed"; |
| // TRANSLATORS: Interpreter Complex Page Encountered |
| "printer-state-reasons.interpreter-complex-page-encountered" = "Interpreter Complex Page Encountered"; |
| // TRANSLATORS: Interpreter Memory Decrease |
| "printer-state-reasons.interpreter-memory-decrease" = "Interpreter Memory Decrease"; |
| // TRANSLATORS: Interpreter Memory Increase |
| "printer-state-reasons.interpreter-memory-increase" = "Interpreter Memory Increase"; |
| // TRANSLATORS: Interpreter Resource Added |
| "printer-state-reasons.interpreter-resource-added" = "Interpreter Resource Added"; |
| // TRANSLATORS: Interpreter Resource Deleted |
| "printer-state-reasons.interpreter-resource-deleted" = "Interpreter Resource Deleted"; |
| // TRANSLATORS: Printer resource unavailable |
| "printer-state-reasons.interpreter-resource-unavailable" = "Interpreter Resource Unavailable"; |
| // TRANSLATORS: Lamp At End of Life |
| "printer-state-reasons.lamp-at-eol" = "Lamp At End of Life"; |
| // TRANSLATORS: Lamp Failure |
| "printer-state-reasons.lamp-failure" = "Lamp Failure"; |
| // TRANSLATORS: Lamp Near End of Life |
| "printer-state-reasons.lamp-near-eol" = "Lamp Near End of Life"; |
| // TRANSLATORS: Laser At End of Life |
| "printer-state-reasons.laser-at-eol" = "Laser At End of Life"; |
| // TRANSLATORS: Laser Failure |
| "printer-state-reasons.laser-failure" = "Laser Failure"; |
| // TRANSLATORS: Laser Near End of Life |
| "printer-state-reasons.laser-near-eol" = "Laser Near End of Life"; |
| // TRANSLATORS: Envelope Maker Added |
| "printer-state-reasons.make-envelope-added" = "Envelope Maker Added"; |
| // TRANSLATORS: Envelope Maker Almost Empty |
| "printer-state-reasons.make-envelope-almost-empty" = "Envelope Maker Almost Empty"; |
| // TRANSLATORS: Envelope Maker Almost Full |
| "printer-state-reasons.make-envelope-almost-full" = "Envelope Maker Almost Full"; |
| // TRANSLATORS: Envelope Maker At Limit |
| "printer-state-reasons.make-envelope-at-limit" = "Envelope Maker At Limit"; |
| // TRANSLATORS: Envelope Maker Closed |
| "printer-state-reasons.make-envelope-closed" = "Envelope Maker Closed"; |
| // TRANSLATORS: Envelope Maker Configuration Change |
| "printer-state-reasons.make-envelope-configuration-change" = "Envelope Maker Configuration Change"; |
| // TRANSLATORS: Envelope Maker Cover Closed |
| "printer-state-reasons.make-envelope-cover-closed" = "Envelope Maker Cover Closed"; |
| // TRANSLATORS: Envelope Maker Cover Open |
| "printer-state-reasons.make-envelope-cover-open" = "Envelope Maker Cover Open"; |
| // TRANSLATORS: Envelope Maker Empty |
| "printer-state-reasons.make-envelope-empty" = "Envelope Maker Empty"; |
| // TRANSLATORS: Envelope Maker Full |
| "printer-state-reasons.make-envelope-full" = "Envelope Maker Full"; |
| // TRANSLATORS: Envelope Maker Interlock Closed |
| "printer-state-reasons.make-envelope-interlock-closed" = "Envelope Maker Interlock Closed"; |
| // TRANSLATORS: Envelope Maker Interlock Open |
| "printer-state-reasons.make-envelope-interlock-open" = "Envelope Maker Interlock Open"; |
| // TRANSLATORS: Envelope Maker Jam |
| "printer-state-reasons.make-envelope-jam" = "Envelope Maker Jam"; |
| // TRANSLATORS: Envelope Maker Life Almost Over |
| "printer-state-reasons.make-envelope-life-almost-over" = "Envelope Maker Life Almost Over"; |
| // TRANSLATORS: Envelope Maker Life Over |
| "printer-state-reasons.make-envelope-life-over" = "Envelope Maker Life Over"; |
| // TRANSLATORS: Envelope Maker Memory Exhausted |
| "printer-state-reasons.make-envelope-memory-exhausted" = "Envelope Maker Memory Exhausted"; |
| // TRANSLATORS: Envelope Maker Missing |
| "printer-state-reasons.make-envelope-missing" = "Envelope Maker Missing"; |
| // TRANSLATORS: Envelope Maker Motor Failure |
| "printer-state-reasons.make-envelope-motor-failure" = "Envelope Maker Motor Failure"; |
| // TRANSLATORS: Envelope Maker Near Limit |
| "printer-state-reasons.make-envelope-near-limit" = "Envelope Maker Near Limit"; |
| // TRANSLATORS: Envelope Maker Offline |
| "printer-state-reasons.make-envelope-offline" = "Envelope Maker Offline"; |
| // TRANSLATORS: Envelope Maker Opened |
| "printer-state-reasons.make-envelope-opened" = "Envelope Maker Opened"; |
| // TRANSLATORS: Envelope Maker Over Temperature |
| "printer-state-reasons.make-envelope-over-temperature" = "Envelope Maker Over Temperature"; |
| // TRANSLATORS: Envelope Maker Power Saver |
| "printer-state-reasons.make-envelope-power-saver" = "Envelope Maker Power Saver"; |
| // TRANSLATORS: Envelope Maker Recoverable Failure |
| "printer-state-reasons.make-envelope-recoverable-failure" = "Envelope Maker Recoverable Failure"; |
| // TRANSLATORS: Envelope Maker Recoverable Storage |
| "printer-state-reasons.make-envelope-recoverable-storage" = "Envelope Maker Recoverable Storage"; |
| // TRANSLATORS: Envelope Maker Removed |
| "printer-state-reasons.make-envelope-removed" = "Envelope Maker Removed"; |
| // TRANSLATORS: Envelope Maker Resource Added |
| "printer-state-reasons.make-envelope-resource-added" = "Envelope Maker Resource Added"; |
| // TRANSLATORS: Envelope Maker Resource Removed |
| "printer-state-reasons.make-envelope-resource-removed" = "Envelope Maker Resource Removed"; |
| // TRANSLATORS: Envelope Maker Thermistor Failure |
| "printer-state-reasons.make-envelope-thermistor-failure" = "Envelope Maker Thermistor Failure"; |
| // TRANSLATORS: Envelope Maker Timing Failure |
| "printer-state-reasons.make-envelope-timing-failure" = "Envelope Maker Timing Failure"; |
| // TRANSLATORS: Envelope Maker Turned Off |
| "printer-state-reasons.make-envelope-turned-off" = "Envelope Maker Turned Off"; |
| // TRANSLATORS: Envelope Maker Turned On |
| "printer-state-reasons.make-envelope-turned-on" = "Envelope Maker Turned On"; |
| // TRANSLATORS: Envelope Maker Under Temperature |
| "printer-state-reasons.make-envelope-under-temperature" = "Envelope Maker Under Temperature"; |
| // TRANSLATORS: Envelope Maker Unrecoverable Failure |
| "printer-state-reasons.make-envelope-unrecoverable-failure" = "Envelope Maker Unrecoverable Failure"; |
| // TRANSLATORS: Envelope Maker Unrecoverable Storage Error |
| "printer-state-reasons.make-envelope-unrecoverable-storage-error" = "Envelope Maker Unrecoverable Storage Error"; |
| // TRANSLATORS: Envelope Maker Warming Up |
| "printer-state-reasons.make-envelope-warming-up" = "Envelope Maker Warming Up"; |
| // TRANSLATORS: Marker Adjusting Print Quality |
| "printer-state-reasons.marker-adjusting-print-quality" = "Marker Adjusting Print Quality"; |
| // TRANSLATORS: Marker Cleaner Missing |
| "printer-state-reasons.marker-cleaner-missing" = "Marker Cleaner Missing"; |
| // TRANSLATORS: Marker Developer Almost Empty |
| "printer-state-reasons.marker-developer-almost-empty" = "Marker Developer Almost Empty"; |
| // TRANSLATORS: Marker Developer Empty |
| "printer-state-reasons.marker-developer-empty" = "Marker Developer Empty"; |
| // TRANSLATORS: Marker Developer Missing |
| "printer-state-reasons.marker-developer-missing" = "Marker Developer Missing"; |
| // TRANSLATORS: Marker Fuser Missing |
| "printer-state-reasons.marker-fuser-missing" = "Marker Fuser Missing"; |
| // TRANSLATORS: Marker Fuser Thermistor Failure |
| "printer-state-reasons.marker-fuser-thermistor-failure" = "Marker Fuser Thermistor Failure"; |
| // TRANSLATORS: Marker Fuser Timing Failure |
| "printer-state-reasons.marker-fuser-timing-failure" = "Marker Fuser Timing Failure"; |
| // TRANSLATORS: Marker Ink Almost Empty |
| "printer-state-reasons.marker-ink-almost-empty" = "Low ink"; |
| // TRANSLATORS: Marker Ink Empty |
| "printer-state-reasons.marker-ink-empty" = "Ink empty"; |
| // TRANSLATORS: Marker Ink Missing |
| "printer-state-reasons.marker-ink-missing" = "Ink missing"; |
| // TRANSLATORS: Marker Opc Missing |
| "printer-state-reasons.marker-opc-missing" = "OPC missing"; |
| // TRANSLATORS: Marker Print Ribbon Almost Empty |
| "printer-state-reasons.marker-print-ribbon-almost-empty" = "Print ribbon Almost Empty"; |
| // TRANSLATORS: Marker Print Ribbon Empty |
| "printer-state-reasons.marker-print-ribbon-empty" = "Print ribbon Empty"; |
| // TRANSLATORS: Marker Print Ribbon Missing |
| "printer-state-reasons.marker-print-ribbon-missing" = "Print ribbon missing"; |
| // TRANSLATORS: Marker Supply Almost Empty |
| "printer-state-reasons.marker-supply-almost-empty" = "Ink/toner almost empty"; |
| // TRANSLATORS: Ink/toner empty |
| "printer-state-reasons.marker-supply-empty" = "Ink/toner empty"; |
| // TRANSLATORS: Ink/toner low |
| "printer-state-reasons.marker-supply-low" = "Ink/toner low"; |
| // TRANSLATORS: Marker Supply Missing |
| "printer-state-reasons.marker-supply-missing" = "Ink/toner missing"; |
| // TRANSLATORS: Marker Toner Cartridge Missing |
| "printer-state-reasons.marker-toner-cartridge-missing" = "Toner cartridge missing"; |
| // TRANSLATORS: Marker Toner Missing |
| "printer-state-reasons.marker-toner-missing" = "Toner missing"; |
| // TRANSLATORS: Ink/toner waste bin almost full |
| "printer-state-reasons.marker-waste-almost-full" = "Ink/toner waste bin almost full"; |
| // TRANSLATORS: Ink/toner waste bin full |
| "printer-state-reasons.marker-waste-full" = "Ink/toner waste bin full"; |
| // TRANSLATORS: Marker Waste Ink Receptacle Almost Full |
| "printer-state-reasons.marker-waste-ink-receptacle-almost-full" = "Marker Waste Ink Receptacle Almost Full"; |
| // TRANSLATORS: Marker Waste Ink Receptacle Full |
| "printer-state-reasons.marker-waste-ink-receptacle-full" = "Marker Waste Ink Receptacle Full"; |
| // TRANSLATORS: Marker Waste Ink Receptacle Missing |
| "printer-state-reasons.marker-waste-ink-receptacle-missing" = "Marker Waste Ink Receptacle Missing"; |
| // TRANSLATORS: Marker Waste Missing |
| "printer-state-reasons.marker-waste-missing" = "Ink/toner waste bin missing"; |
| // TRANSLATORS: Marker Waste Toner Receptacle Almost Full |
| "printer-state-reasons.marker-waste-toner-receptacle-almost-full" = "Marker Waste Toner Receptacle Almost Full"; |
| // TRANSLATORS: Marker Waste Toner Receptacle Full |
| "printer-state-reasons.marker-waste-toner-receptacle-full" = "Marker Waste Toner Receptacle Full"; |
| // TRANSLATORS: Marker Waste Toner Receptacle Missing |
| "printer-state-reasons.marker-waste-toner-receptacle-missing" = "Marker Waste Toner Receptacle Missing"; |
| // TRANSLATORS: Material Empty |
| "printer-state-reasons.material-empty" = "Material Empty"; |
| // TRANSLATORS: Material Low |
| "printer-state-reasons.material-low" = "Material Low"; |
| // TRANSLATORS: Material Needed |
| "printer-state-reasons.material-needed" = "Material Needed"; |
| // TRANSLATORS: Media Drying |
| "printer-state-reasons.media-drying" = "Media Drying"; |
| // TRANSLATORS: Paper tray is empty |
| "printer-state-reasons.media-empty" = "Media Empty"; |
| // TRANSLATORS: Paper jam |
| "printer-state-reasons.media-jam" = "Media Jam"; |
| // TRANSLATORS: Paper tray is almost empty |
| "printer-state-reasons.media-low" = "Paper tray is almost empty"; |
| // TRANSLATORS: Load paper |
| "printer-state-reasons.media-needed" = "Load paper"; |
| // TRANSLATORS: Media Path Cannot Do 2-Sided Printing |
| "printer-state-reasons.media-path-cannot-duplex-media-selected" = "Media Path Cannot Do 2-Sided Printing"; |
| // TRANSLATORS: Media Path Failure |
| "printer-state-reasons.media-path-failure" = "Media Path Failure"; |
| // TRANSLATORS: Media Path Input Empty |
| "printer-state-reasons.media-path-input-empty" = "Media Path Input Empty"; |
| // TRANSLATORS: Media Path Input Feed Error |
| "printer-state-reasons.media-path-input-feed-error" = "Media Path Input Feed Error"; |
| // TRANSLATORS: Media Path Input Jam |
| "printer-state-reasons.media-path-input-jam" = "Media Path Input Jam"; |
| // TRANSLATORS: Media Path Input Request |
| "printer-state-reasons.media-path-input-request" = "Media Path Input Request"; |
| // TRANSLATORS: Media Path Jam |
| "printer-state-reasons.media-path-jam" = "Media Path Jam"; |
| // TRANSLATORS: Media Path Media Tray Almost Full |
| "printer-state-reasons.media-path-media-tray-almost-full" = "Media Path Media Tray Almost Full"; |
| // TRANSLATORS: Media Path Media Tray Full |
| "printer-state-reasons.media-path-media-tray-full" = "Media Path Media Tray Full"; |
| // TRANSLATORS: Media Path Media Tray Missing |
| "printer-state-reasons.media-path-media-tray-missing" = "Media Path Media Tray Missing"; |
| // TRANSLATORS: Media Path Output Feed Error |
| "printer-state-reasons.media-path-output-feed-error" = "Media Path Output Feed Error"; |
| // TRANSLATORS: Media Path Output Full |
| "printer-state-reasons.media-path-output-full" = "Media Path Output Full"; |
| // TRANSLATORS: Media Path Output Jam |
| "printer-state-reasons.media-path-output-jam" = "Media Path Output Jam"; |
| // TRANSLATORS: Media Path Pick Roller Failure |
| "printer-state-reasons.media-path-pick-roller-failure" = "Media Path Pick Roller Failure"; |
| // TRANSLATORS: Media Path Pick Roller Life Over |
| "printer-state-reasons.media-path-pick-roller-life-over" = "Media Path Pick Roller Life Over"; |
| // TRANSLATORS: Media Path Pick Roller Life Warn |
| "printer-state-reasons.media-path-pick-roller-life-warn" = "Media Path Pick Roller Life Warn"; |
| // TRANSLATORS: Media Path Pick Roller Missing |
| "printer-state-reasons.media-path-pick-roller-missing" = "Media Path Pick Roller Missing"; |
| // TRANSLATORS: Motor Failure |
| "printer-state-reasons.motor-failure" = "Motor Failure"; |
| // TRANSLATORS: Printer going offline |
| "printer-state-reasons.moving-to-paused" = "Moving To Paused"; |
| // TRANSLATORS: None |
| "printer-state-reasons.none" = "None"; |
| // TRANSLATORS: Optical Photoconductor Life Over |
| "printer-state-reasons.opc-life-over" = "Optical Photoconductor Life Over"; |
| // TRANSLATORS: OPC almost at end-of-life |
| "printer-state-reasons.opc-near-eol" = "Optical Photoconductor Near End-of-life"; |
| // TRANSLATORS: Check the printer for errors |
| "printer-state-reasons.other" = "Other"; |
| // TRANSLATORS: Output bin is almost full |
| "printer-state-reasons.output-area-almost-full" = "Output Area Almost Full"; |
| // TRANSLATORS: Output bin is full |
| "printer-state-reasons.output-area-full" = "Output Area Full"; |
| // TRANSLATORS: Output Mailbox Select Failure |
| "printer-state-reasons.output-mailbox-select-failure" = "Output Mailbox Select Failure"; |
| // TRANSLATORS: Output Media Tray Failure |
| "printer-state-reasons.output-media-tray-failure" = "Output Media Tray Failure"; |
| // TRANSLATORS: Output Media Tray Feed Error |
| "printer-state-reasons.output-media-tray-feed-error" = "Output Media Tray Feed Error"; |
| // TRANSLATORS: Output Media Tray Jam |
| "printer-state-reasons.output-media-tray-jam" = "Output Media Tray Jam"; |
| // TRANSLATORS: Output tray is missing |
| "printer-state-reasons.output-tray-missing" = "Output Tray Missing"; |
| // TRANSLATORS: Paused |
| "printer-state-reasons.paused" = "Paused"; |
| // TRANSLATORS: Perforater Added |
| "printer-state-reasons.perforater-added" = "Perforater Added"; |
| // TRANSLATORS: Perforater Almost Empty |
| "printer-state-reasons.perforater-almost-empty" = "Perforater Almost Empty"; |
| // TRANSLATORS: Perforater Almost Full |
| "printer-state-reasons.perforater-almost-full" = "Perforater Almost Full"; |
| // TRANSLATORS: Perforater At Limit |
| "printer-state-reasons.perforater-at-limit" = "Perforater At Limit"; |
| // TRANSLATORS: Perforater Closed |
| "printer-state-reasons.perforater-closed" = "Perforater Closed"; |
| // TRANSLATORS: Perforater Configuration Change |
| "printer-state-reasons.perforater-configuration-change" = "Perforater Configuration Change"; |
| // TRANSLATORS: Perforater Cover Closed |
| "printer-state-reasons.perforater-cover-closed" = "Perforater Cover Closed"; |
| // TRANSLATORS: Perforater Cover Open |
| "printer-state-reasons.perforater-cover-open" = "Perforater Cover Open"; |
| // TRANSLATORS: Perforater Empty |
| "printer-state-reasons.perforater-empty" = "Perforater Empty"; |
| // TRANSLATORS: Perforater Full |
| "printer-state-reasons.perforater-full" = "Perforater Full"; |
| // TRANSLATORS: Perforater Interlock Closed |
| "printer-state-reasons.perforater-interlock-closed" = "Perforater Interlock Closed"; |
| // TRANSLATORS: Perforater Interlock Open |
| "printer-state-reasons.perforater-interlock-open" = "Perforater Interlock Open"; |
| // TRANSLATORS: Perforater Jam |
| "printer-state-reasons.perforater-jam" = "Perforater Jam"; |
| // TRANSLATORS: Perforater Life Almost Over |
| "printer-state-reasons.perforater-life-almost-over" = "Perforater Life Almost Over"; |
| // TRANSLATORS: Perforater Life Over |
| "printer-state-reasons.perforater-life-over" = "Perforater Life Over"; |
| // TRANSLATORS: Perforater Memory Exhausted |
| "printer-state-reasons.perforater-memory-exhausted" = "Perforater Memory Exhausted"; |
| // TRANSLATORS: Perforater Missing |
| "printer-state-reasons.perforater-missing" = "Perforater Missing"; |
| // TRANSLATORS: Perforater Motor Failure |
| "printer-state-reasons.perforater-motor-failure" = "Perforater Motor Failure"; |
| // TRANSLATORS: Perforater Near Limit |
| "printer-state-reasons.perforater-near-limit" = "Perforater Near Limit"; |
| // TRANSLATORS: Perforater Offline |
| "printer-state-reasons.perforater-offline" = "Perforater Offline"; |
| // TRANSLATORS: Perforater Opened |
| "printer-state-reasons.perforater-opened" = "Perforater Opened"; |
| // TRANSLATORS: Perforater Over Temperature |
| "printer-state-reasons.perforater-over-temperature" = "Perforater Over Temperature"; |
| // TRANSLATORS: Perforater Power Saver |
| "printer-state-reasons.perforater-power-saver" = "Perforater Power Saver"; |
| // TRANSLATORS: Perforater Recoverable Failure |
| "printer-state-reasons.perforater-recoverable-failure" = "Perforater Recoverable Failure"; |
| // TRANSLATORS: Perforater Recoverable Storage |
| "printer-state-reasons.perforater-recoverable-storage" = "Perforater Recoverable Storage"; |
| // TRANSLATORS: Perforater Removed |
| "printer-state-reasons.perforater-removed" = "Perforater Removed"; |
| // TRANSLATORS: Perforater Resource Added |
| "printer-state-reasons.perforater-resource-added" = "Perforater Resource Added"; |
| // TRANSLATORS: Perforater Resource Removed |
| "printer-state-reasons.perforater-resource-removed" = "Perforater Resource Removed"; |
| // TRANSLATORS: Perforater Thermistor Failure |
| "printer-state-reasons.perforater-thermistor-failure" = "Perforater Thermistor Failure"; |
| // TRANSLATORS: Perforater Timing Failure |
| "printer-state-reasons.perforater-timing-failure" = "Perforater Timing Failure"; |
| // TRANSLATORS: Perforater Turned Off |
| "printer-state-reasons.perforater-turned-off" = "Perforater Turned Off"; |
| // TRANSLATORS: Perforater Turned On |
| "printer-state-reasons.perforater-turned-on" = "Perforater Turned On"; |
| // TRANSLATORS: Perforater Under Temperature |
| "printer-state-reasons.perforater-under-temperature" = "Perforater Under Temperature"; |
| // TRANSLATORS: Perforater Unrecoverable Failure |
| "printer-state-reasons.perforater-unrecoverable-failure" = "Perforater Unrecoverable Failure"; |
| // TRANSLATORS: Perforater Unrecoverable Storage Error |
| "printer-state-reasons.perforater-unrecoverable-storage-error" = "Perforater Unrecoverable Storage Error"; |
| // TRANSLATORS: Perforater Warming Up |
| "printer-state-reasons.perforater-warming-up" = "Perforater Warming Up"; |
| // TRANSLATORS: Platform Cooling |
| "printer-state-reasons.platform-cooling" = "Platform Cooling"; |
| // TRANSLATORS: Platform Failure |
| "printer-state-reasons.platform-failure" = "Platform Failure"; |
| // TRANSLATORS: Platform Heating |
| "printer-state-reasons.platform-heating" = "Platform Heating"; |
| // TRANSLATORS: Platform Temperature High |
| "printer-state-reasons.platform-temperature-high" = "Platform Temperature High"; |
| // TRANSLATORS: Platform Temperature Low |
| "printer-state-reasons.platform-temperature-low" = "Platform Temperature Low"; |
| // TRANSLATORS: Power Down |
| "printer-state-reasons.power-down" = "Power Down"; |
| // TRANSLATORS: Power Up |
| "printer-state-reasons.power-up" = "Power Up"; |
| // TRANSLATORS: Printer Reset Manually |
| "printer-state-reasons.printer-manual-reset" = "Printer Reset Manually"; |
| // TRANSLATORS: Printer Reset Remotely |
| "printer-state-reasons.printer-nms-reset" = "Printer Reset Remotely"; |
| // TRANSLATORS: Printer Ready To Print |
| "printer-state-reasons.printer-ready-to-print" = "Printer Ready To Print"; |
| // TRANSLATORS: Puncher Added |
| "printer-state-reasons.puncher-added" = "Puncher Added"; |
| // TRANSLATORS: Puncher Almost Empty |
| "printer-state-reasons.puncher-almost-empty" = "Puncher Almost Empty"; |
| // TRANSLATORS: Puncher Almost Full |
| "printer-state-reasons.puncher-almost-full" = "Puncher Almost Full"; |
| // TRANSLATORS: Puncher At Limit |
| "printer-state-reasons.puncher-at-limit" = "Puncher At Limit"; |
| // TRANSLATORS: Puncher Closed |
| "printer-state-reasons.puncher-closed" = "Puncher Closed"; |
| // TRANSLATORS: Puncher Configuration Change |
| "printer-state-reasons.puncher-configuration-change" = "Puncher Configuration Change"; |
| // TRANSLATORS: Puncher Cover Closed |
| "printer-state-reasons.puncher-cover-closed" = "Puncher Cover Closed"; |
| // TRANSLATORS: Puncher Cover Open |
| "printer-state-reasons.puncher-cover-open" = "Puncher Cover Open"; |
| // TRANSLATORS: Puncher Empty |
| "printer-state-reasons.puncher-empty" = "Puncher Empty"; |
| // TRANSLATORS: Puncher Full |
| "printer-state-reasons.puncher-full" = "Puncher Full"; |
| // TRANSLATORS: Puncher Interlock Closed |
| "printer-state-reasons.puncher-interlock-closed" = "Puncher Interlock Closed"; |
| // TRANSLATORS: Puncher Interlock Open |
| "printer-state-reasons.puncher-interlock-open" = "Puncher Interlock Open"; |
| // TRANSLATORS: Puncher Jam |
| "printer-state-reasons.puncher-jam" = "Puncher Jam"; |
| // TRANSLATORS: Puncher Life Almost Over |
| "printer-state-reasons.puncher-life-almost-over" = "Puncher Life Almost Over"; |
| // TRANSLATORS: Puncher Life Over |
| "printer-state-reasons.puncher-life-over" = "Puncher Life Over"; |
| // TRANSLATORS: Puncher Memory Exhausted |
| "printer-state-reasons.puncher-memory-exhausted" = "Puncher Memory Exhausted"; |
| // TRANSLATORS: Puncher Missing |
| "printer-state-reasons.puncher-missing" = "Puncher Missing"; |
| // TRANSLATORS: Puncher Motor Failure |
| "printer-state-reasons.puncher-motor-failure" = "Puncher Motor Failure"; |
| // TRANSLATORS: Puncher Near Limit |
| "printer-state-reasons.puncher-near-limit" = "Puncher Near Limit"; |
| // TRANSLATORS: Puncher Offline |
| "printer-state-reasons.puncher-offline" = "Puncher Offline"; |
| // TRANSLATORS: Puncher Opened |
| "printer-state-reasons.puncher-opened" = "Puncher Opened"; |
| // TRANSLATORS: Puncher Over Temperature |
| "printer-state-reasons.puncher-over-temperature" = "Puncher Over Temperature"; |
| // TRANSLATORS: Puncher Power Saver |
| "printer-state-reasons.puncher-power-saver" = "Puncher Power Saver"; |
| // TRANSLATORS: Puncher Recoverable Failure |
| "printer-state-reasons.puncher-recoverable-failure" = "Puncher Recoverable Failure"; |
| // TRANSLATORS: Puncher Recoverable Storage |
| "printer-state-reasons.puncher-recoverable-storage" = "Puncher Recoverable Storage"; |
| // TRANSLATORS: Puncher Removed |
| "printer-state-reasons.puncher-removed" = "Puncher Removed"; |
| // TRANSLATORS: Puncher Resource Added |
| "printer-state-reasons.puncher-resource-added" = "Puncher Resource Added"; |
| // TRANSLATORS: Puncher Resource Removed |
| "printer-state-reasons.puncher-resource-removed" = "Puncher Resource Removed"; |
| // TRANSLATORS: Puncher Thermistor Failure |
| "printer-state-reasons.puncher-thermistor-failure" = "Puncher Thermistor Failure"; |
| // TRANSLATORS: Puncher Timing Failure |
| "printer-state-reasons.puncher-timing-failure" = "Puncher Timing Failure"; |
| // TRANSLATORS: Puncher Turned Off |
| "printer-state-reasons.puncher-turned-off" = "Puncher Turned Off"; |
| // TRANSLATORS: Puncher Turned On |
| "printer-state-reasons.puncher-turned-on" = "Puncher Turned On"; |
| // TRANSLATORS: Puncher Under Temperature |
| "printer-state-reasons.puncher-under-temperature" = "Puncher Under Temperature"; |
| // TRANSLATORS: Puncher Unrecoverable Failure |
| "printer-state-reasons.puncher-unrecoverable-failure" = "Puncher Unrecoverable Failure"; |
| // TRANSLATORS: Puncher Unrecoverable Storage Error |
| "printer-state-reasons.puncher-unrecoverable-storage-error" = "Puncher Unrecoverable Storage Error"; |
| // TRANSLATORS: Puncher Warming Up |
| "printer-state-reasons.puncher-warming-up" = "Puncher Warming Up"; |
| // TRANSLATORS: Separation Cutter Added |
| "printer-state-reasons.separation-cutter-added" = "Separation Cutter Added"; |
| // TRANSLATORS: Separation Cutter Almost Empty |
| "printer-state-reasons.separation-cutter-almost-empty" = "Separation Cutter Almost Empty"; |
| // TRANSLATORS: Separation Cutter Almost Full |
| "printer-state-reasons.separation-cutter-almost-full" = "Separation Cutter Almost Full"; |
| // TRANSLATORS: Separation Cutter At Limit |
| "printer-state-reasons.separation-cutter-at-limit" = "Separation Cutter At Limit"; |
| // TRANSLATORS: Separation Cutter Closed |
| "printer-state-reasons.separation-cutter-closed" = "Separation Cutter Closed"; |
| // TRANSLATORS: Separation Cutter Configuration Change |
| "printer-state-reasons.separation-cutter-configuration-change" = "Separation Cutter Configuration Change"; |
| // TRANSLATORS: Separation Cutter Cover Closed |
| "printer-state-reasons.separation-cutter-cover-closed" = "Separation Cutter Cover Closed"; |
| // TRANSLATORS: Separation Cutter Cover Open |
| "printer-state-reasons.separation-cutter-cover-open" = "Separation Cutter Cover Open"; |
| // TRANSLATORS: Separation Cutter Empty |
| "printer-state-reasons.separation-cutter-empty" = "Separation Cutter Empty"; |
| // TRANSLATORS: Separation Cutter Full |
| "printer-state-reasons.separation-cutter-full" = "Separation Cutter Full"; |
| // TRANSLATORS: Separation Cutter Interlock Closed |
| "printer-state-reasons.separation-cutter-interlock-closed" = "Separation Cutter Interlock Closed"; |
| // TRANSLATORS: Separation Cutter Interlock Open |
| "printer-state-reasons.separation-cutter-interlock-open" = "Separation Cutter Interlock Open"; |
| // TRANSLATORS: Separation Cutter Jam |
| "printer-state-reasons.separation-cutter-jam" = "Separation Cutter Jam"; |
| // TRANSLATORS: Separation Cutter Life Almost Over |
| "printer-state-reasons.separation-cutter-life-almost-over" = "Separation Cutter Life Almost Over"; |
| // TRANSLATORS: Separation Cutter Life Over |
| "printer-state-reasons.separation-cutter-life-over" = "Separation Cutter Life Over"; |
| // TRANSLATORS: Separation Cutter Memory Exhausted |
| "printer-state-reasons.separation-cutter-memory-exhausted" = "Separation Cutter Memory Exhausted"; |
| // TRANSLATORS: Separation Cutter Missing |
| "printer-state-reasons.separation-cutter-missing" = "Separation Cutter Missing"; |
| // TRANSLATORS: Separation Cutter Motor Failure |
| "printer-state-reasons.separation-cutter-motor-failure" = "Separation Cutter Motor Failure"; |
| // TRANSLATORS: Separation Cutter Near Limit |
| "printer-state-reasons.separation-cutter-near-limit" = "Separation Cutter Near Limit"; |
| // TRANSLATORS: Separation Cutter Offline |
| "printer-state-reasons.separation-cutter-offline" = "Separation Cutter Offline"; |
| // TRANSLATORS: Separation Cutter Opened |
| "printer-state-reasons.separation-cutter-opened" = "Separation Cutter Opened"; |
| // TRANSLATORS: Separation Cutter Over Temperature |
| "printer-state-reasons.separation-cutter-over-temperature" = "Separation Cutter Over Temperature"; |
| // TRANSLATORS: Separation Cutter Power Saver |
| "printer-state-reasons.separation-cutter-power-saver" = "Separation Cutter Power Saver"; |
| // TRANSLATORS: Separation Cutter Recoverable Failure |
| "printer-state-reasons.separation-cutter-recoverable-failure" = "Separation Cutter Recoverable Failure"; |
| // TRANSLATORS: Separation Cutter Recoverable Storage |
| "printer-state-reasons.separation-cutter-recoverable-storage" = "Separation Cutter Recoverable Storage"; |
| // TRANSLATORS: Separation Cutter Removed |
| "printer-state-reasons.separation-cutter-removed" = "Separation Cutter Removed"; |
| // TRANSLATORS: Separation Cutter Resource Added |
| "printer-state-reasons.separation-cutter-resource-added" = "Separation Cutter Resource Added"; |
| // TRANSLATORS: Separation Cutter Resource Removed |
| "printer-state-reasons.separation-cutter-resource-removed" = "Separation Cutter Resource Removed"; |
| // TRANSLATORS: Separation Cutter Thermistor Failure |
| "printer-state-reasons.separation-cutter-thermistor-failure" = "Separation Cutter Thermistor Failure"; |
| // TRANSLATORS: Separation Cutter Timing Failure |
| "printer-state-reasons.separation-cutter-timing-failure" = "Separation Cutter Timing Failure"; |
| // TRANSLATORS: Separation Cutter Turned Off |
| "printer-state-reasons.separation-cutter-turned-off" = "Separation Cutter Turned Off"; |
| // TRANSLATORS: Separation Cutter Turned On |
| "printer-state-reasons.separation-cutter-turned-on" = "Separation Cutter Turned On"; |
| // TRANSLATORS: Separation Cutter Under Temperature |
| "printer-state-reasons.separation-cutter-under-temperature" = "Separation Cutter Under Temperature"; |
| // TRANSLATORS: Separation Cutter Unrecoverable Failure |
| "printer-state-reasons.separation-cutter-unrecoverable-failure" = "Separation Cutter Unrecoverable Failure"; |
| // TRANSLATORS: Separation Cutter Unrecoverable Storage Error |
| "printer-state-reasons.separation-cutter-unrecoverable-storage-error" = "Separation Cutter Unrecoverable Storage Error"; |
| // TRANSLATORS: Separation Cutter Warming Up |
| "printer-state-reasons.separation-cutter-warming-up" = "Separation Cutter Warming Up"; |
| // TRANSLATORS: Sheet Rotator Added |
| "printer-state-reasons.sheet-rotator-added" = "Sheet Rotator Added"; |
| // TRANSLATORS: Sheet Rotator Almost Empty |
| "printer-state-reasons.sheet-rotator-almost-empty" = "Sheet Rotator Almost Empty"; |
| // TRANSLATORS: Sheet Rotator Almost Full |
| "printer-state-reasons.sheet-rotator-almost-full" = "Sheet Rotator Almost Full"; |
| // TRANSLATORS: Sheet Rotator At Limit |
| "printer-state-reasons.sheet-rotator-at-limit" = "Sheet Rotator At Limit"; |
| // TRANSLATORS: Sheet Rotator Closed |
| "printer-state-reasons.sheet-rotator-closed" = "Sheet Rotator Closed"; |
| // TRANSLATORS: Sheet Rotator Configuration Change |
| "printer-state-reasons.sheet-rotator-configuration-change" = "Sheet Rotator Configuration Change"; |
| // TRANSLATORS: Sheet Rotator Cover Closed |
| "printer-state-reasons.sheet-rotator-cover-closed" = "Sheet Rotator Cover Closed"; |
| // TRANSLATORS: Sheet Rotator Cover Open |
| "printer-state-reasons.sheet-rotator-cover-open" = "Sheet Rotator Cover Open"; |
| // TRANSLATORS: Sheet Rotator Empty |
| "printer-state-reasons.sheet-rotator-empty" = "Sheet Rotator Empty"; |
| // TRANSLATORS: Sheet Rotator Full |
| "printer-state-reasons.sheet-rotator-full" = "Sheet Rotator Full"; |
| // TRANSLATORS: Sheet Rotator Interlock Closed |
| "printer-state-reasons.sheet-rotator-interlock-closed" = "Sheet Rotator Interlock Closed"; |
| // TRANSLATORS: Sheet Rotator Interlock Open |
| "printer-state-reasons.sheet-rotator-interlock-open" = "Sheet Rotator Interlock Open"; |
| // TRANSLATORS: Sheet Rotator Jam |
| "printer-state-reasons.sheet-rotator-jam" = "Sheet Rotator Jam"; |
| // TRANSLATORS: Sheet Rotator Life Almost Over |
| "printer-state-reasons.sheet-rotator-life-almost-over" = "Sheet Rotator Life Almost Over"; |
| // TRANSLATORS: Sheet Rotator Life Over |
| "printer-state-reasons.sheet-rotator-life-over" = "Sheet Rotator Life Over"; |
| // TRANSLATORS: Sheet Rotator Memory Exhausted |
| "printer-state-reasons.sheet-rotator-memory-exhausted" = "Sheet Rotator Memory Exhausted"; |
| // TRANSLATORS: Sheet Rotator Missing |
| "printer-state-reasons.sheet-rotator-missing" = "Sheet Rotator Missing"; |
| // TRANSLATORS: Sheet Rotator Motor Failure |
| "printer-state-reasons.sheet-rotator-motor-failure" = "Sheet Rotator Motor Failure"; |
| // TRANSLATORS: Sheet Rotator Near Limit |
| "printer-state-reasons.sheet-rotator-near-limit" = "Sheet Rotator Near Limit"; |
| // TRANSLATORS: Sheet Rotator Offline |
| "printer-state-reasons.sheet-rotator-offline" = "Sheet Rotator Offline"; |
| // TRANSLATORS: Sheet Rotator Opened |
| "printer-state-reasons.sheet-rotator-opened" = "Sheet Rotator Opened"; |
| // TRANSLATORS: Sheet Rotator Over Temperature |
| "printer-state-reasons.sheet-rotator-over-temperature" = "Sheet Rotator Over Temperature"; |
| // TRANSLATORS: Sheet Rotator Power Saver |
| "printer-state-reasons.sheet-rotator-power-saver" = "Sheet Rotator Power Saver"; |
| // TRANSLATORS: Sheet Rotator Recoverable Failure |
| "printer-state-reasons.sheet-rotator-recoverable-failure" = "Sheet Rotator Recoverable Failure"; |
| // TRANSLATORS: Sheet Rotator Recoverable Storage |
| "printer-state-reasons.sheet-rotator-recoverable-storage" = "Sheet Rotator Recoverable Storage"; |
| // TRANSLATORS: Sheet Rotator Removed |
| "printer-state-reasons.sheet-rotator-removed" = "Sheet Rotator Removed"; |
| // TRANSLATORS: Sheet Rotator Resource Added |
| "printer-state-reasons.sheet-rotator-resource-added" = "Sheet Rotator Resource Added"; |
| // TRANSLATORS: Sheet Rotator Resource Removed |
| "printer-state-reasons.sheet-rotator-resource-removed" = "Sheet Rotator Resource Removed"; |
| // TRANSLATORS: Sheet Rotator Thermistor Failure |
| "printer-state-reasons.sheet-rotator-thermistor-failure" = "Sheet Rotator Thermistor Failure"; |
| // TRANSLATORS: Sheet Rotator Timing Failure |
| "printer-state-reasons.sheet-rotator-timing-failure" = "Sheet Rotator Timing Failure"; |
| // TRANSLATORS: Sheet Rotator Turned Off |
| "printer-state-reasons.sheet-rotator-turned-off" = "Sheet Rotator Turned Off"; |
| // TRANSLATORS: Sheet Rotator Turned On |
| "printer-state-reasons.sheet-rotator-turned-on" = "Sheet Rotator Turned On"; |
| // TRANSLATORS: Sheet Rotator Under Temperature |
| "printer-state-reasons.sheet-rotator-under-temperature" = "Sheet Rotator Under Temperature"; |
| // TRANSLATORS: Sheet Rotator Unrecoverable Failure |
| "printer-state-reasons.sheet-rotator-unrecoverable-failure" = "Sheet Rotator Unrecoverable Failure"; |
| // TRANSLATORS: Sheet Rotator Unrecoverable Storage Error |
| "printer-state-reasons.sheet-rotator-unrecoverable-storage-error" = "Sheet Rotator Unrecoverable Storage Error"; |
| // TRANSLATORS: Sheet Rotator Warming Up |
| "printer-state-reasons.sheet-rotator-warming-up" = "Sheet Rotator Warming Up"; |
| // TRANSLATORS: Printer offline |
| "printer-state-reasons.shutdown" = "Shutdown"; |
| // TRANSLATORS: Slitter Added |
| "printer-state-reasons.slitter-added" = "Slitter Added"; |
| // TRANSLATORS: Slitter Almost Empty |
| "printer-state-reasons.slitter-almost-empty" = "Slitter Almost Empty"; |
| // TRANSLATORS: Slitter Almost Full |
| "printer-state-reasons.slitter-almost-full" = "Slitter Almost Full"; |
| // TRANSLATORS: Slitter At Limit |
| "printer-state-reasons.slitter-at-limit" = "Slitter At Limit"; |
| // TRANSLATORS: Slitter Closed |
| "printer-state-reasons.slitter-closed" = "Slitter Closed"; |
| // TRANSLATORS: Slitter Configuration Change |
| "printer-state-reasons.slitter-configuration-change" = "Slitter Configuration Change"; |
| // TRANSLATORS: Slitter Cover Closed |
| "printer-state-reasons.slitter-cover-closed" = "Slitter Cover Closed"; |
| // TRANSLATORS: Slitter Cover Open |
| "printer-state-reasons.slitter-cover-open" = "Slitter Cover Open"; |
| // TRANSLATORS: Slitter Empty |
| "printer-state-reasons.slitter-empty" = "Slitter Empty"; |
| // TRANSLATORS: Slitter Full |
| "printer-state-reasons.slitter-full" = "Slitter Full"; |
| // TRANSLATORS: Slitter Interlock Closed |
| "printer-state-reasons.slitter-interlock-closed" = "Slitter Interlock Closed"; |
| // TRANSLATORS: Slitter Interlock Open |
| "printer-state-reasons.slitter-interlock-open" = "Slitter Interlock Open"; |
| // TRANSLATORS: Slitter Jam |
| "printer-state-reasons.slitter-jam" = "Slitter Jam"; |
| // TRANSLATORS: Slitter Life Almost Over |
| "printer-state-reasons.slitter-life-almost-over" = "Slitter Life Almost Over"; |
| // TRANSLATORS: Slitter Life Over |
| "printer-state-reasons.slitter-life-over" = "Slitter Life Over"; |
| // TRANSLATORS: Slitter Memory Exhausted |
| "printer-state-reasons.slitter-memory-exhausted" = "Slitter Memory Exhausted"; |
| // TRANSLATORS: Slitter Missing |
| "printer-state-reasons.slitter-missing" = "Slitter Missing"; |
| // TRANSLATORS: Slitter Motor Failure |
| "printer-state-reasons.slitter-motor-failure" = "Slitter Motor Failure"; |
| // TRANSLATORS: Slitter Near Limit |
| "printer-state-reasons.slitter-near-limit" = "Slitter Near Limit"; |
| // TRANSLATORS: Slitter Offline |
| "printer-state-reasons.slitter-offline" = "Slitter Offline"; |
| // TRANSLATORS: Slitter Opened |
| "printer-state-reasons.slitter-opened" = "Slitter Opened"; |
| // TRANSLATORS: Slitter Over Temperature |
| "printer-state-reasons.slitter-over-temperature" = "Slitter Over Temperature"; |
| // TRANSLATORS: Slitter Power Saver |
| "printer-state-reasons.slitter-power-saver" = "Slitter Power Saver"; |
| // TRANSLATORS: Slitter Recoverable Failure |
| "printer-state-reasons.slitter-recoverable-failure" = "Slitter Recoverable Failure"; |
| // TRANSLATORS: Slitter Recoverable Storage |
| "printer-state-reasons.slitter-recoverable-storage" = "Slitter Recoverable Storage"; |
| // TRANSLATORS: Slitter Removed |
| "printer-state-reasons.slitter-removed" = "Slitter Removed"; |
| // TRANSLATORS: Slitter Resource Added |
| "printer-state-reasons.slitter-resource-added" = "Slitter Resource Added"; |
| // TRANSLATORS: Slitter Resource Removed |
| "printer-state-reasons.slitter-resource-removed" = "Slitter Resource Removed"; |
| // TRANSLATORS: Slitter Thermistor Failure |
| "printer-state-reasons.slitter-thermistor-failure" = "Slitter Thermistor Failure"; |
| // TRANSLATORS: Slitter Timing Failure |
| "printer-state-reasons.slitter-timing-failure" = "Slitter Timing Failure"; |
| // TRANSLATORS: Slitter Turned Off |
| "printer-state-reasons.slitter-turned-off" = "Slitter Turned Off"; |
| // TRANSLATORS: Slitter Turned On |
| "printer-state-reasons.slitter-turned-on" = "Slitter Turned On"; |
| // TRANSLATORS: Slitter Under Temperature |
| "printer-state-reasons.slitter-under-temperature" = "Slitter Under Temperature"; |
| // TRANSLATORS: Slitter Unrecoverable Failure |
| "printer-state-reasons.slitter-unrecoverable-failure" = "Slitter Unrecoverable Failure"; |
| // TRANSLATORS: Slitter Unrecoverable Storage Error |
| "printer-state-reasons.slitter-unrecoverable-storage-error" = "Slitter Unrecoverable Storage Error"; |
| // TRANSLATORS: Slitter Warming Up |
| "printer-state-reasons.slitter-warming-up" = "Slitter Warming Up"; |
| // TRANSLATORS: Spool Area Full |
| "printer-state-reasons.spool-area-full" = "Spool Area Full"; |
| // TRANSLATORS: Stacker Added |
| "printer-state-reasons.stacker-added" = "Stacker Added"; |
| // TRANSLATORS: Stacker Almost Empty |
| "printer-state-reasons.stacker-almost-empty" = "Stacker Almost Empty"; |
| // TRANSLATORS: Stacker Almost Full |
| "printer-state-reasons.stacker-almost-full" = "Stacker Almost Full"; |
| // TRANSLATORS: Stacker At Limit |
| "printer-state-reasons.stacker-at-limit" = "Stacker At Limit"; |
| // TRANSLATORS: Stacker Closed |
| "printer-state-reasons.stacker-closed" = "Stacker Closed"; |
| // TRANSLATORS: Stacker Configuration Change |
| "printer-state-reasons.stacker-configuration-change" = "Stacker Configuration Change"; |
| // TRANSLATORS: Stacker Cover Closed |
| "printer-state-reasons.stacker-cover-closed" = "Stacker Cover Closed"; |
| // TRANSLATORS: Stacker Cover Open |
| "printer-state-reasons.stacker-cover-open" = "Stacker Cover Open"; |
| // TRANSLATORS: Stacker Empty |
| "printer-state-reasons.stacker-empty" = "Stacker Empty"; |
| // TRANSLATORS: Stacker Full |
| "printer-state-reasons.stacker-full" = "Stacker Full"; |
| // TRANSLATORS: Stacker Interlock Closed |
| "printer-state-reasons.stacker-interlock-closed" = "Stacker Interlock Closed"; |
| // TRANSLATORS: Stacker Interlock Open |
| "printer-state-reasons.stacker-interlock-open" = "Stacker Interlock Open"; |
| // TRANSLATORS: Stacker Jam |
| "printer-state-reasons.stacker-jam" = "Stacker Jam"; |
| // TRANSLATORS: Stacker Life Almost Over |
| "printer-state-reasons.stacker-life-almost-over" = "Stacker Life Almost Over"; |
| // TRANSLATORS: Stacker Life Over |
| "printer-state-reasons.stacker-life-over" = "Stacker Life Over"; |
| // TRANSLATORS: Stacker Memory Exhausted |
| "printer-state-reasons.stacker-memory-exhausted" = "Stacker Memory Exhausted"; |
| // TRANSLATORS: Stacker Missing |
| "printer-state-reasons.stacker-missing" = "Stacker Missing"; |
| // TRANSLATORS: Stacker Motor Failure |
| "printer-state-reasons.stacker-motor-failure" = "Stacker Motor Failure"; |
| // TRANSLATORS: Stacker Near Limit |
| "printer-state-reasons.stacker-near-limit" = "Stacker Near Limit"; |
| // TRANSLATORS: Stacker Offline |
| "printer-state-reasons.stacker-offline" = "Stacker Offline"; |
| // TRANSLATORS: Stacker Opened |
| "printer-state-reasons.stacker-opened" = "Stacker Opened"; |
| // TRANSLATORS: Stacker Over Temperature |
| "printer-state-reasons.stacker-over-temperature" = "Stacker Over Temperature"; |
| // TRANSLATORS: Stacker Power Saver |
| "printer-state-reasons.stacker-power-saver" = "Stacker Power Saver"; |
| // TRANSLATORS: Stacker Recoverable Failure |
| "printer-state-reasons.stacker-recoverable-failure" = "Stacker Recoverable Failure"; |
| // TRANSLATORS: Stacker Recoverable Storage |
| "printer-state-reasons.stacker-recoverable-storage" = "Stacker Recoverable Storage"; |
| // TRANSLATORS: Stacker Removed |
| "printer-state-reasons.stacker-removed" = "Stacker Removed"; |
| // TRANSLATORS: Stacker Resource Added |
| "printer-state-reasons.stacker-resource-added" = "Stacker Resource Added"; |
| // TRANSLATORS: Stacker Resource Removed |
| "printer-state-reasons.stacker-resource-removed" = "Stacker Resource Removed"; |
| // TRANSLATORS: Stacker Thermistor Failure |
| "printer-state-reasons.stacker-thermistor-failure" = "Stacker Thermistor Failure"; |
| // TRANSLATORS: Stacker Timing Failure |
| "printer-state-reasons.stacker-timing-failure" = "Stacker Timing Failure"; |
| // TRANSLATORS: Stacker Turned Off |
| "printer-state-reasons.stacker-turned-off" = "Stacker Turned Off"; |
| // TRANSLATORS: Stacker Turned On |
| "printer-state-reasons.stacker-turned-on" = "Stacker Turned On"; |
| // TRANSLATORS: Stacker Under Temperature |
| "printer-state-reasons.stacker-under-temperature" = "Stacker Under Temperature"; |
| // TRANSLATORS: Stacker Unrecoverable Failure |
| "printer-state-reasons.stacker-unrecoverable-failure" = "Stacker Unrecoverable Failure"; |
| // TRANSLATORS: Stacker Unrecoverable Storage Error |
| "printer-state-reasons.stacker-unrecoverable-storage-error" = "Stacker Unrecoverable Storage Error"; |
| // TRANSLATORS: Stacker Warming Up |
| "printer-state-reasons.stacker-warming-up" = "Stacker Warming Up"; |
| // TRANSLATORS: Stapler Added |
| "printer-state-reasons.stapler-added" = "Stapler Added"; |
| // TRANSLATORS: Stapler Almost Empty |
| "printer-state-reasons.stapler-almost-empty" = "Stapler Almost Empty"; |
| // TRANSLATORS: Stapler Almost Full |
| "printer-state-reasons.stapler-almost-full" = "Stapler Almost Full"; |
| // TRANSLATORS: Stapler At Limit |
| "printer-state-reasons.stapler-at-limit" = "Stapler At Limit"; |
| // TRANSLATORS: Stapler Closed |
| "printer-state-reasons.stapler-closed" = "Stapler Closed"; |
| // TRANSLATORS: Stapler Configuration Change |
| "printer-state-reasons.stapler-configuration-change" = "Stapler Configuration Change"; |
| // TRANSLATORS: Stapler Cover Closed |
| "printer-state-reasons.stapler-cover-closed" = "Stapler Cover Closed"; |
| // TRANSLATORS: Stapler Cover Open |
| "printer-state-reasons.stapler-cover-open" = "Stapler Cover Open"; |
| // TRANSLATORS: Stapler Empty |
| "printer-state-reasons.stapler-empty" = "Stapler Empty"; |
| // TRANSLATORS: Stapler Full |
| "printer-state-reasons.stapler-full" = "Stapler Full"; |
| // TRANSLATORS: Stapler Interlock Closed |
| "printer-state-reasons.stapler-interlock-closed" = "Stapler Interlock Closed"; |
| // TRANSLATORS: Stapler Interlock Open |
| "printer-state-reasons.stapler-interlock-open" = "Stapler Interlock Open"; |
| // TRANSLATORS: Stapler Jam |
| "printer-state-reasons.stapler-jam" = "Stapler Jam"; |
| // TRANSLATORS: Stapler Life Almost Over |
| "printer-state-reasons.stapler-life-almost-over" = "Stapler Life Almost Over"; |
| // TRANSLATORS: Stapler Life Over |
| "printer-state-reasons.stapler-life-over" = "Stapler Life Over"; |
| // TRANSLATORS: Stapler Memory Exhausted |
| "printer-state-reasons.stapler-memory-exhausted" = "Stapler Memory Exhausted"; |
| // TRANSLATORS: Stapler Missing |
| "printer-state-reasons.stapler-missing" = "Stapler Missing"; |
| // TRANSLATORS: Stapler Motor Failure |
| "printer-state-reasons.stapler-motor-failure" = "Stapler Motor Failure"; |
| // TRANSLATORS: Stapler Near Limit |
| "printer-state-reasons.stapler-near-limit" = "Stapler Near Limit"; |
| // TRANSLATORS: Stapler Offline |
| "printer-state-reasons.stapler-offline" = "Stapler Offline"; |
| // TRANSLATORS: Stapler Opened |
| "printer-state-reasons.stapler-opened" = "Stapler Opened"; |
| // TRANSLATORS: Stapler Over Temperature |
| "printer-state-reasons.stapler-over-temperature" = "Stapler Over Temperature"; |
| // TRANSLATORS: Stapler Power Saver |
| "printer-state-reasons.stapler-power-saver" = "Stapler Power Saver"; |
| // TRANSLATORS: Stapler Recoverable Failure |
| "printer-state-reasons.stapler-recoverable-failure" = "Stapler Recoverable Failure"; |
| // TRANSLATORS: Stapler Recoverable Storage |
| "printer-state-reasons.stapler-recoverable-storage" = "Stapler Recoverable Storage"; |
| // TRANSLATORS: Stapler Removed |
| "printer-state-reasons.stapler-removed" = "Stapler Removed"; |
| // TRANSLATORS: Stapler Resource Added |
| "printer-state-reasons.stapler-resource-added" = "Stapler Resource Added"; |
| // TRANSLATORS: Stapler Resource Removed |
| "printer-state-reasons.stapler-resource-removed" = "Stapler Resource Removed"; |
| // TRANSLATORS: Stapler Thermistor Failure |
| "printer-state-reasons.stapler-thermistor-failure" = "Stapler Thermistor Failure"; |
| // TRANSLATORS: Stapler Timing Failure |
| "printer-state-reasons.stapler-timing-failure" = "Stapler Timing Failure"; |
| // TRANSLATORS: Stapler Turned Off |
| "printer-state-reasons.stapler-turned-off" = "Stapler Turned Off"; |
| // TRANSLATORS: Stapler Turned On |
| "printer-state-reasons.stapler-turned-on" = "Stapler Turned On"; |
| // TRANSLATORS: Stapler Under Temperature |
| "printer-state-reasons.stapler-under-temperature" = "Stapler Under Temperature"; |
| // TRANSLATORS: Stapler Unrecoverable Failure |
| "printer-state-reasons.stapler-unrecoverable-failure" = "Stapler Unrecoverable Failure"; |
| // TRANSLATORS: Stapler Unrecoverable Storage Error |
| "printer-state-reasons.stapler-unrecoverable-storage-error" = "Stapler Unrecoverable Storage Error"; |
| // TRANSLATORS: Stapler Warming Up |
| "printer-state-reasons.stapler-warming-up" = "Stapler Warming Up"; |
| // TRANSLATORS: Stitcher Added |
| "printer-state-reasons.stitcher-added" = "Stitcher Added"; |
| // TRANSLATORS: Stitcher Almost Empty |
| "printer-state-reasons.stitcher-almost-empty" = "Stitcher Almost Empty"; |
| // TRANSLATORS: Stitcher Almost Full |
| "printer-state-reasons.stitcher-almost-full" = "Stitcher Almost Full"; |
| // TRANSLATORS: Stitcher At Limit |
| "printer-state-reasons.stitcher-at-limit" = "Stitcher At Limit"; |
| // TRANSLATORS: Stitcher Closed |
| "printer-state-reasons.stitcher-closed" = "Stitcher Closed"; |
| // TRANSLATORS: Stitcher Configuration Change |
| "printer-state-reasons.stitcher-configuration-change" = "Stitcher Configuration Change"; |
| // TRANSLATORS: Stitcher Cover Closed |
| "printer-state-reasons.stitcher-cover-closed" = "Stitcher Cover Closed"; |
| // TRANSLATORS: Stitcher Cover Open |
| "printer-state-reasons.stitcher-cover-open" = "Stitcher Cover Open"; |
| // TRANSLATORS: Stitcher Empty |
| "printer-state-reasons.stitcher-empty" = "Stitcher Empty"; |
| // TRANSLATORS: Stitcher Full |
| "printer-state-reasons.stitcher-full" = "Stitcher Full"; |
| // TRANSLATORS: Stitcher Interlock Closed |
| "printer-state-reasons.stitcher-interlock-closed" = "Stitcher Interlock Closed"; |
| // TRANSLATORS: Stitcher Interlock Open |
| "printer-state-reasons.stitcher-interlock-open" = "Stitcher Interlock Open"; |
| // TRANSLATORS: Stitcher Jam |
| "printer-state-reasons.stitcher-jam" = "Stitcher Jam"; |
| // TRANSLATORS: Stitcher Life Almost Over |
| "printer-state-reasons.stitcher-life-almost-over" = "Stitcher Life Almost Over"; |
| // TRANSLATORS: Stitcher Life Over |
| "printer-state-reasons.stitcher-life-over" = "Stitcher Life Over"; |
| // TRANSLATORS: Stitcher Memory Exhausted |
| "printer-state-reasons.stitcher-memory-exhausted" = "Stitcher Memory Exhausted"; |
| // TRANSLATORS: Stitcher Missing |
| "printer-state-reasons.stitcher-missing" = "Stitcher Missing"; |
| // TRANSLATORS: Stitcher Motor Failure |
| "printer-state-reasons.stitcher-motor-failure" = "Stitcher Motor Failure"; |
| // TRANSLATORS: Stitcher Near Limit |
| "printer-state-reasons.stitcher-near-limit" = "Stitcher Near Limit"; |
| // TRANSLATORS: Stitcher Offline |
| "printer-state-reasons.stitcher-offline" = "Stitcher Offline"; |
| // TRANSLATORS: Stitcher Opened |
| "printer-state-reasons.stitcher-opened" = "Stitcher Opened"; |
| // TRANSLATORS: Stitcher Over Temperature |
| "printer-state-reasons.stitcher-over-temperature" = "Stitcher Over Temperature"; |
| // TRANSLATORS: Stitcher Power Saver |
| "printer-state-reasons.stitcher-power-saver" = "Stitcher Power Saver"; |
| // TRANSLATORS: Stitcher Recoverable Failure |
| "printer-state-reasons.stitcher-recoverable-failure" = "Stitcher Recoverable Failure"; |
| // TRANSLATORS: Stitcher Recoverable Storage |
| "printer-state-reasons.stitcher-recoverable-storage" = "Stitcher Recoverable Storage"; |
| // TRANSLATORS: Stitcher Removed |
| "printer-state-reasons.stitcher-removed" = "Stitcher Removed"; |
| // TRANSLATORS: Stitcher Resource Added |
| "printer-state-reasons.stitcher-resource-added" = "Stitcher Resource Added"; |
| // TRANSLATORS: Stitcher Resource Removed |
| "printer-state-reasons.stitcher-resource-removed" = "Stitcher Resource Removed"; |
| // TRANSLATORS: Stitcher Thermistor Failure |
| "printer-state-reasons.stitcher-thermistor-failure" = "Stitcher Thermistor Failure"; |
| // TRANSLATORS: Stitcher Timing Failure |
| "printer-state-reasons.stitcher-timing-failure" = "Stitcher Timing Failure"; |
| // TRANSLATORS: Stitcher Turned Off |
| "printer-state-reasons.stitcher-turned-off" = "Stitcher Turned Off"; |
| // TRANSLATORS: Stitcher Turned On |
| "printer-state-reasons.stitcher-turned-on" = "Stitcher Turned On"; |
| // TRANSLATORS: Stitcher Under Temperature |
| "printer-state-reasons.stitcher-under-temperature" = "Stitcher Under Temperature"; |
| // TRANSLATORS: Stitcher Unrecoverable Failure |
| "printer-state-reasons.stitcher-unrecoverable-failure" = "Stitcher Unrecoverable Failure"; |
| // TRANSLATORS: Stitcher Unrecoverable Storage Error |
| "printer-state-reasons.stitcher-unrecoverable-storage-error" = "Stitcher Unrecoverable Storage Error"; |
| // TRANSLATORS: Stitcher Warming Up |
| "printer-state-reasons.stitcher-warming-up" = "Stitcher Warming Up"; |
| // TRANSLATORS: Partially stopped |
| "printer-state-reasons.stopped-partly" = "Stopped Partly"; |
| // TRANSLATORS: Stopping |
| "printer-state-reasons.stopping" = "Stopping"; |
| // TRANSLATORS: Subunit Added |
| "printer-state-reasons.subunit-added" = "Subunit Added"; |
| // TRANSLATORS: Subunit Almost Empty |
| "printer-state-reasons.subunit-almost-empty" = "Subunit Almost Empty"; |
| // TRANSLATORS: Subunit Almost Full |
| "printer-state-reasons.subunit-almost-full" = "Subunit Almost Full"; |
| // TRANSLATORS: Subunit At Limit |
| "printer-state-reasons.subunit-at-limit" = "Subunit At Limit"; |
| // TRANSLATORS: Subunit Closed |
| "printer-state-reasons.subunit-closed" = "Subunit Closed"; |
| // TRANSLATORS: Subunit Cooling Down |
| "printer-state-reasons.subunit-cooling-down" = "Subunit Cooling Down"; |
| // TRANSLATORS: Subunit Empty |
| "printer-state-reasons.subunit-empty" = "Subunit Empty"; |
| // TRANSLATORS: Subunit Full |
| "printer-state-reasons.subunit-full" = "Subunit Full"; |
| // TRANSLATORS: Subunit Life Almost Over |
| "printer-state-reasons.subunit-life-almost-over" = "Subunit Life Almost Over"; |
| // TRANSLATORS: Subunit Life Over |
| "printer-state-reasons.subunit-life-over" = "Subunit Life Over"; |
| // TRANSLATORS: Subunit Memory Exhausted |
| "printer-state-reasons.subunit-memory-exhausted" = "Subunit Memory Exhausted"; |
| // TRANSLATORS: Subunit Missing |
| "printer-state-reasons.subunit-missing" = "Subunit Missing"; |
| // TRANSLATORS: Subunit Motor Failure |
| "printer-state-reasons.subunit-motor-failure" = "Subunit Motor Failure"; |
| // TRANSLATORS: Subunit Near Limit |
| "printer-state-reasons.subunit-near-limit" = "Subunit Near Limit"; |
| // TRANSLATORS: Subunit Offline |
| "printer-state-reasons.subunit-offline" = "Subunit Offline"; |
| // TRANSLATORS: Subunit Opened |
| "printer-state-reasons.subunit-opened" = "Subunit Opened"; |
| // TRANSLATORS: Subunit Over Temperature |
| "printer-state-reasons.subunit-over-temperature" = "Subunit Over Temperature"; |
| // TRANSLATORS: Subunit Power Saver |
| "printer-state-reasons.subunit-power-saver" = "Subunit Power Saver"; |
| // TRANSLATORS: Subunit Recoverable Failure |
| "printer-state-reasons.subunit-recoverable-failure" = "Subunit Recoverable Failure"; |
| // TRANSLATORS: Subunit Recoverable Storage |
| "printer-state-reasons.subunit-recoverable-storage" = "Subunit Recoverable Storage"; |
| // TRANSLATORS: Subunit Removed |
| "printer-state-reasons.subunit-removed" = "Subunit Removed"; |
| // TRANSLATORS: Subunit Resource Added |
| "printer-state-reasons.subunit-resource-added" = "Subunit Resource Added"; |
| // TRANSLATORS: Subunit Resource Removed |
| "printer-state-reasons.subunit-resource-removed" = "Subunit Resource Removed"; |
| // TRANSLATORS: Subunit Thermistor Failure |
| "printer-state-reasons.subunit-thermistor-failure" = "Subunit Thermistor Failure"; |
| // TRANSLATORS: Subunit Timing Failure |
| "printer-state-reasons.subunit-timing-Failure" = "Subunit Timing Failure"; |
| // TRANSLATORS: Subunit Turned Off |
| "printer-state-reasons.subunit-turned-off" = "Subunit Turned Off"; |
| // TRANSLATORS: Subunit Turned On |
| "printer-state-reasons.subunit-turned-on" = "Subunit Turned On"; |
| // TRANSLATORS: Subunit Under Temperature |
| "printer-state-reasons.subunit-under-temperature" = "Subunit Under Temperature"; |
| // TRANSLATORS: Subunit Unrecoverable Failure |
| "printer-state-reasons.subunit-unrecoverable-failure" = "Subunit Unrecoverable Failure"; |
| // TRANSLATORS: Subunit Unrecoverable Storage |
| "printer-state-reasons.subunit-unrecoverable-storage" = "Subunit Unrecoverable Storage"; |
| // TRANSLATORS: Subunit Warming Up |
| "printer-state-reasons.subunit-warming-up" = "Subunit Warming Up"; |
| // TRANSLATORS: Printer stopped responding |
| "printer-state-reasons.timed-out" = "Timed Out"; |
| // TRANSLATORS: Out of toner |
| "printer-state-reasons.toner-empty" = "Toner Empty"; |
| // TRANSLATORS: Toner low |
| "printer-state-reasons.toner-low" = "Toner Low"; |
| // TRANSLATORS: Trimmer Added |
| "printer-state-reasons.trimmer-added" = "Trimmer Added"; |
| // TRANSLATORS: Trimmer Almost Empty |
| "printer-state-reasons.trimmer-almost-empty" = "Trimmer Almost Empty"; |
| // TRANSLATORS: Trimmer Almost Full |
| "printer-state-reasons.trimmer-almost-full" = "Trimmer Almost Full"; |
| // TRANSLATORS: Trimmer At Limit |
| "printer-state-reasons.trimmer-at-limit" = "Trimmer At Limit"; |
| // TRANSLATORS: Trimmer Closed |
| "printer-state-reasons.trimmer-closed" = "Trimmer Closed"; |
| // TRANSLATORS: Trimmer Configuration Change |
| "printer-state-reasons.trimmer-configuration-change" = "Trimmer Configuration Change"; |
| // TRANSLATORS: Trimmer Cover Closed |
| "printer-state-reasons.trimmer-cover-closed" = "Trimmer Cover Closed"; |
| // TRANSLATORS: Trimmer Cover Open |
| "printer-state-reasons.trimmer-cover-open" = "Trimmer Cover Open"; |
| // TRANSLATORS: Trimmer Empty |
| "printer-state-reasons.trimmer-empty" = "Trimmer Empty"; |
| // TRANSLATORS: Trimmer Full |
| "printer-state-reasons.trimmer-full" = "Trimmer Full"; |
| // TRANSLATORS: Trimmer Interlock Closed |
| "printer-state-reasons.trimmer-interlock-closed" = "Trimmer Interlock Closed"; |
| // TRANSLATORS: Trimmer Interlock Open |
| "printer-state-reasons.trimmer-interlock-open" = "Trimmer Interlock Open"; |
| // TRANSLATORS: Trimmer Jam |
| "printer-state-reasons.trimmer-jam" = "Trimmer Jam"; |
| // TRANSLATORS: Trimmer Life Almost Over |
| "printer-state-reasons.trimmer-life-almost-over" = "Trimmer Life Almost Over"; |
| // TRANSLATORS: Trimmer Life Over |
| "printer-state-reasons.trimmer-life-over" = "Trimmer Life Over"; |
| // TRANSLATORS: Trimmer Memory Exhausted |
| "printer-state-reasons.trimmer-memory-exhausted" = "Trimmer Memory Exhausted"; |
| // TRANSLATORS: Trimmer Missing |
| "printer-state-reasons.trimmer-missing" = "Trimmer Missing"; |
| // TRANSLATORS: Trimmer Motor Failure |
| "printer-state-reasons.trimmer-motor-failure" = "Trimmer Motor Failure"; |
| // TRANSLATORS: Trimmer Near Limit |
| "printer-state-reasons.trimmer-near-limit" = "Trimmer Near Limit"; |
| // TRANSLATORS: Trimmer Offline |
| "printer-state-reasons.trimmer-offline" = "Trimmer Offline"; |
| // TRANSLATORS: Trimmer Opened |
| "printer-state-reasons.trimmer-opened" = "Trimmer Opened"; |
| // TRANSLATORS: Trimmer Over Temperature |
| "printer-state-reasons.trimmer-over-temperature" = "Trimmer Over Temperature"; |
| // TRANSLATORS: Trimmer Power Saver |
| "printer-state-reasons.trimmer-power-saver" = "Trimmer Power Saver"; |
| // TRANSLATORS: Trimmer Recoverable Failure |
| "printer-state-reasons.trimmer-recoverable-failure" = "Trimmer Recoverable Failure"; |
| // TRANSLATORS: Trimmer Recoverable Storage |
| "printer-state-reasons.trimmer-recoverable-storage" = "Trimmer Recoverable Storage"; |
| // TRANSLATORS: Trimmer Removed |
| "printer-state-reasons.trimmer-removed" = "Trimmer Removed"; |
| // TRANSLATORS: Trimmer Resource Added |
| "printer-state-reasons.trimmer-resource-added" = "Trimmer Resource Added"; |
| // TRANSLATORS: Trimmer Resource Removed |
| "printer-state-reasons.trimmer-resource-removed" = "Trimmer Resource Removed"; |
| // TRANSLATORS: Trimmer Thermistor Failure |
| "printer-state-reasons.trimmer-thermistor-failure" = "Trimmer Thermistor Failure"; |
| // TRANSLATORS: Trimmer Timing Failure |
| "printer-state-reasons.trimmer-timing-failure" = "Trimmer Timing Failure"; |
| // TRANSLATORS: Trimmer Turned Off |
| "printer-state-reasons.trimmer-turned-off" = "Trimmer Turned Off"; |
| // TRANSLATORS: Trimmer Turned On |
| "printer-state-reasons.trimmer-turned-on" = "Trimmer Turned On"; |
| // TRANSLATORS: Trimmer Under Temperature |
| "printer-state-reasons.trimmer-under-temperature" = "Trimmer Under Temperature"; |
| // TRANSLATORS: Trimmer Unrecoverable Failure |
| "printer-state-reasons.trimmer-unrecoverable-failure" = "Trimmer Unrecoverable Failure"; |
| // TRANSLATORS: Trimmer Unrecoverable Storage Error |
| "printer-state-reasons.trimmer-unrecoverable-storage-error" = "Trimmer Unrecoverable Storage Error"; |
| // TRANSLATORS: Trimmer Warming Up |
| "printer-state-reasons.trimmer-warming-up" = "Trimmer Warming Up"; |
| // TRANSLATORS: Unknown |
| "printer-state-reasons.unknown" = "Unknown"; |
| // TRANSLATORS: Wrapper Added |
| "printer-state-reasons.wrapper-added" = "Wrapper Added"; |
| // TRANSLATORS: Wrapper Almost Empty |
| "printer-state-reasons.wrapper-almost-empty" = "Wrapper Almost Empty"; |
| // TRANSLATORS: Wrapper Almost Full |
| "printer-state-reasons.wrapper-almost-full" = "Wrapper Almost Full"; |
| // TRANSLATORS: Wrapper At Limit |
| "printer-state-reasons.wrapper-at-limit" = "Wrapper At Limit"; |
| // TRANSLATORS: Wrapper Closed |
| "printer-state-reasons.wrapper-closed" = "Wrapper Closed"; |
| // TRANSLATORS: Wrapper Configuration Change |
| "printer-state-reasons.wrapper-configuration-change" = "Wrapper Configuration Change"; |
| // TRANSLATORS: Wrapper Cover Closed |
| "printer-state-reasons.wrapper-cover-closed" = "Wrapper Cover Closed"; |
| // TRANSLATORS: Wrapper Cover Open |
| "printer-state-reasons.wrapper-cover-open" = "Wrapper Cover Open"; |
| // TRANSLATORS: Wrapper Empty |
| "printer-state-reasons.wrapper-empty" = "Wrapper Empty"; |
| // TRANSLATORS: Wrapper Full |
| "printer-state-reasons.wrapper-full" = "Wrapper Full"; |
| // TRANSLATORS: Wrapper Interlock Closed |
| "printer-state-reasons.wrapper-interlock-closed" = "Wrapper Interlock Closed"; |
| // TRANSLATORS: Wrapper Interlock Open |
| "printer-state-reasons.wrapper-interlock-open" = "Wrapper Interlock Open"; |
| // TRANSLATORS: Wrapper Jam |
| "printer-state-reasons.wrapper-jam" = "Wrapper Jam"; |
| // TRANSLATORS: Wrapper Life Almost Over |
| "printer-state-reasons.wrapper-life-almost-over" = "Wrapper Life Almost Over"; |
| // TRANSLATORS: Wrapper Life Over |
| "printer-state-reasons.wrapper-life-over" = "Wrapper Life Over"; |
| // TRANSLATORS: Wrapper Memory Exhausted |
| "printer-state-reasons.wrapper-memory-exhausted" = "Wrapper Memory Exhausted"; |
| // TRANSLATORS: Wrapper Missing |
| "printer-state-reasons.wrapper-missing" = "Wrapper Missing"; |
| // TRANSLATORS: Wrapper Motor Failure |
| "printer-state-reasons.wrapper-motor-failure" = "Wrapper Motor Failure"; |
| // TRANSLATORS: Wrapper Near Limit |
| "printer-state-reasons.wrapper-near-limit" = "Wrapper Near Limit"; |
| // TRANSLATORS: Wrapper Offline |
| "printer-state-reasons.wrapper-offline" = "Wrapper Offline"; |
| // TRANSLATORS: Wrapper Opened |
| "printer-state-reasons.wrapper-opened" = "Wrapper Opened"; |
| // TRANSLATORS: Wrapper Over Temperature |
| "printer-state-reasons.wrapper-over-temperature" = "Wrapper Over Temperature"; |
| // TRANSLATORS: Wrapper Power Saver |
| "printer-state-reasons.wrapper-power-saver" = "Wrapper Power Saver"; |
| // TRANSLATORS: Wrapper Recoverable Failure |
| "printer-state-reasons.wrapper-recoverable-failure" = "Wrapper Recoverable Failure"; |
| // TRANSLATORS: Wrapper Recoverable Storage |
| "printer-state-reasons.wrapper-recoverable-storage" = "Wrapper Recoverable Storage"; |
| // TRANSLATORS: Wrapper Removed |
| "printer-state-reasons.wrapper-removed" = "Wrapper Removed"; |
| // TRANSLATORS: Wrapper Resource Added |
| "printer-state-reasons.wrapper-resource-added" = "Wrapper Resource Added"; |
| // TRANSLATORS: Wrapper Resource Removed |
| "printer-state-reasons.wrapper-resource-removed" = "Wrapper Resource Removed"; |
| // TRANSLATORS: Wrapper Thermistor Failure |
| "printer-state-reasons.wrapper-thermistor-failure" = "Wrapper Thermistor Failure"; |
| // TRANSLATORS: Wrapper Timing Failure |
| "printer-state-reasons.wrapper-timing-failure" = "Wrapper Timing Failure"; |
| // TRANSLATORS: Wrapper Turned Off |
| "printer-state-reasons.wrapper-turned-off" = "Wrapper Turned Off"; |
| // TRANSLATORS: Wrapper Turned On |
| "printer-state-reasons.wrapper-turned-on" = "Wrapper Turned On"; |
| // TRANSLATORS: Wrapper Under Temperature |
| "printer-state-reasons.wrapper-under-temperature" = "Wrapper Under Temperature"; |
| // TRANSLATORS: Wrapper Unrecoverable Failure |
| "printer-state-reasons.wrapper-unrecoverable-failure" = "Wrapper Unrecoverable Failure"; |
| // TRANSLATORS: Wrapper Unrecoverable Storage Error |
| "printer-state-reasons.wrapper-unrecoverable-storage-error" = "Wrapper Unrecoverable Storage Error"; |
| // TRANSLATORS: Wrapper Warming Up |
| "printer-state-reasons.wrapper-warming-up" = "Wrapper Warming Up"; |
| // TRANSLATORS: Idle |
| "printer-state.3" = "Idle"; |
| // TRANSLATORS: Processing |
| "printer-state.4" = "Processing"; |
| // TRANSLATORS: Stopped |
| "printer-state.5" = "Stopped"; |
| // TRANSLATORS: Printer Uptime |
| "printer-up-time" = "Printer Uptime"; |
| "processing" = "processing"; |
| // TRANSLATORS: Proof Print |
| "proof-print" = "Proof Print"; |
| // TRANSLATORS: Proof Print Copies |
| "proof-print-copies" = "Proof Print Copies"; |
| // TRANSLATORS: Punching |
| "punching" = "Punching"; |
| // TRANSLATORS: Punching Locations |
| "punching-locations" = "Punching Locations"; |
| // TRANSLATORS: Punching Offset |
| "punching-offset" = "Punching Offset"; |
| // TRANSLATORS: Punch Edge |
| "punching-reference-edge" = "Punch Edge"; |
| // TRANSLATORS: Bottom |
| "punching-reference-edge.bottom" = "Bottom"; |
| // TRANSLATORS: Left |
| "punching-reference-edge.left" = "Left"; |
| // TRANSLATORS: Right |
| "punching-reference-edge.right" = "Right"; |
| // TRANSLATORS: Top |
| "punching-reference-edge.top" = "Top"; |
| "request id is %s-%d (%d file(s))" = "request id is %s-%d (%d file(s))"; |
| "request-id uses indefinite length" = "request-id uses indefinite length"; |
| // TRANSLATORS: Requested Attributes |
| "requested-attributes" = "Requested Attributes"; |
| // TRANSLATORS: Retry Interval |
| "retry-interval" = "Retry Interval"; |
| // TRANSLATORS: Retry Timeout |
| "retry-time-out" = "Retry Timeout"; |
| // TRANSLATORS: Save Disposition |
| "save-disposition" = "Save Disposition"; |
| // TRANSLATORS: None |
| "save-disposition.none" = "None"; |
| // TRANSLATORS: Print and Save |
| "save-disposition.print-save" = "Print and Save"; |
| // TRANSLATORS: Save Only |
| "save-disposition.save-only" = "Save Only"; |
| // TRANSLATORS: Save Document Format |
| "save-document-format" = "Save Document Format"; |
| // TRANSLATORS: Save Info |
| "save-info" = "Save Info"; |
| // TRANSLATORS: Save Location |
| "save-location" = "Save Location"; |
| // TRANSLATORS: Save Name |
| "save-name" = "Save Name"; |
| "scheduler is not running" = "scheduler is not running"; |
| "scheduler is running" = "scheduler is running"; |
| // TRANSLATORS: Separator Sheets |
| "separator-sheets" = "Separator Sheets"; |
| // TRANSLATORS: Type of Separator Sheets |
| "separator-sheets-type" = "Type of Separator Sheets"; |
| // TRANSLATORS: Start and End Sheets |
| "separator-sheets-type.both-sheets" = "Start and End Sheets"; |
| // TRANSLATORS: End Sheet |
| "separator-sheets-type.end-sheet" = "End Sheet"; |
| // TRANSLATORS: None |
| "separator-sheets-type.none" = "None"; |
| // TRANSLATORS: Slip Sheets |
| "separator-sheets-type.slip-sheets" = "Slip Sheets"; |
| // TRANSLATORS: Start Sheet |
| "separator-sheets-type.start-sheet" = "Start Sheet"; |
| // TRANSLATORS: 2-Sided Printing |
| "sides" = "2-Sided Printing"; |
| // TRANSLATORS: Off |
| "sides.one-sided" = "Off"; |
| // TRANSLATORS: On (Portrait) |
| "sides.two-sided-long-edge" = "On (Portrait)"; |
| // TRANSLATORS: On (Landscape) |
| "sides.two-sided-short-edge" = "On (Landscape)"; |
| "stat of %s failed: %s" = "stat of %s failed: %s"; |
| "status\t\tShow status of daemon and queue." = "status\t\tShow status of daemon and queue."; |
| // TRANSLATORS: Status Message |
| "status-message" = "Status Message"; |
| // TRANSLATORS: Staple |
| "stitching" = "Staple"; |
| // TRANSLATORS: Stitching Angle |
| "stitching-angle" = "Stitching Angle"; |
| // TRANSLATORS: Stitching Locations |
| "stitching-locations" = "Stitching Locations"; |
| // TRANSLATORS: Staple Method |
| "stitching-method" = "Staple Method"; |
| // TRANSLATORS: Automatic |
| "stitching-method.auto" = "Automatic"; |
| // TRANSLATORS: Crimp |
| "stitching-method.crimp" = "Crimp"; |
| // TRANSLATORS: Wire |
| "stitching-method.wire" = "Wire"; |
| // TRANSLATORS: Stitching Offset |
| "stitching-offset" = "Stitching Offset"; |
| // TRANSLATORS: Staple Edge |
| "stitching-reference-edge" = "Staple Edge"; |
| // TRANSLATORS: Bottom |
| "stitching-reference-edge.bottom" = "Bottom"; |
| // TRANSLATORS: Left |
| "stitching-reference-edge.left" = "Left"; |
| // TRANSLATORS: Right |
| "stitching-reference-edge.right" = "Right"; |
| // TRANSLATORS: Top |
| "stitching-reference-edge.top" = "Top"; |
| "stopped" = "stopped"; |
| // TRANSLATORS: Subject |
| "subject" = "Subject"; |
| // TRANSLATORS: Subscription Privacy Attributes |
| "subscription-privacy-attributes" = "Subscription Privacy Attributes"; |
| // TRANSLATORS: All |
| "subscription-privacy-attributes.all" = "All"; |
| // TRANSLATORS: Default |
| "subscription-privacy-attributes.default" = "Default"; |
| // TRANSLATORS: None |
| "subscription-privacy-attributes.none" = "None"; |
| // TRANSLATORS: Subscription Description |
| "subscription-privacy-attributes.subscription-description" = "Subscription Description"; |
| // TRANSLATORS: Subscription Template |
| "subscription-privacy-attributes.subscription-template" = "Subscription Template"; |
| // TRANSLATORS: Subscription Privacy Scope |
| "subscription-privacy-scope" = "Subscription Privacy Scope"; |
| // TRANSLATORS: All |
| "subscription-privacy-scope.all" = "All"; |
| // TRANSLATORS: Default |
| "subscription-privacy-scope.default" = "Default"; |
| // TRANSLATORS: None |
| "subscription-privacy-scope.none" = "None"; |
| // TRANSLATORS: Owner |
| "subscription-privacy-scope.owner" = "Owner"; |
| "system default destination: %s" = "system default destination: %s"; |
| "system default destination: %s/%s" = "system default destination: %s/%s"; |
| // TRANSLATORS: T33 Subaddress |
| "t33-subaddress" = "T33 Subaddress"; |
| // TRANSLATORS: To Name |
| "to-name" = "To Name"; |
| // TRANSLATORS: Transmission Status |
| "transmission-status" = "Transmission Status"; |
| // TRANSLATORS: Pending |
| "transmission-status.3" = "Pending"; |
| // TRANSLATORS: Pending Retry |
| "transmission-status.4" = "Pending Retry"; |
| // TRANSLATORS: Processing |
| "transmission-status.5" = "Processing"; |
| // TRANSLATORS: Canceled |
| "transmission-status.7" = "Canceled"; |
| // TRANSLATORS: Aborted |
| "transmission-status.8" = "Aborted"; |
| // TRANSLATORS: Completed |
| "transmission-status.9" = "Completed"; |
| // TRANSLATORS: Cut |
| "trimming" = "Cut"; |
| // TRANSLATORS: Cut Position |
| "trimming-offset" = "Cut Position"; |
| // TRANSLATORS: Cut Edge |
| "trimming-reference-edge" = "Cut Edge"; |
| // TRANSLATORS: Bottom |
| "trimming-reference-edge.bottom" = "Bottom"; |
| // TRANSLATORS: Left |
| "trimming-reference-edge.left" = "Left"; |
| // TRANSLATORS: Right |
| "trimming-reference-edge.right" = "Right"; |
| // TRANSLATORS: Top |
| "trimming-reference-edge.top" = "Top"; |
| // TRANSLATORS: Type of Cut |
| "trimming-type" = "Type of Cut"; |
| // TRANSLATORS: Draw Line |
| "trimming-type.draw-line" = "Draw Line"; |
| // TRANSLATORS: Full |
| "trimming-type.full" = "Full"; |
| // TRANSLATORS: Partial |
| "trimming-type.partial" = "Partial"; |
| // TRANSLATORS: Perforate |
| "trimming-type.perforate" = "Perforate"; |
| // TRANSLATORS: Score |
| "trimming-type.score" = "Score"; |
| // TRANSLATORS: Tab |
| "trimming-type.tab" = "Tab"; |
| // TRANSLATORS: Cut After |
| "trimming-when" = "Cut After"; |
| // TRANSLATORS: Every Document |
| "trimming-when.after-documents" = "Every Document"; |
| // TRANSLATORS: Job |
| "trimming-when.after-job" = "Job"; |
| // TRANSLATORS: Every Set |
| "trimming-when.after-sets" = "Every Set"; |
| // TRANSLATORS: Every Page |
| "trimming-when.after-sheets" = "Every Page"; |
| "unknown" = "unknown"; |
| "untitled" = "untitled"; |
| "variable-bindings uses indefinite length" = "variable-bindings uses indefinite length"; |
| // TRANSLATORS: X Accuracy |
| "x-accuracy" = "X Accuracy"; |
| // TRANSLATORS: X Dimension |
| "x-dimension" = "X Dimension"; |
| // TRANSLATORS: X Offset |
| "x-offset" = "X Offset"; |
| // TRANSLATORS: X Origin |
| "x-origin" = "X Origin"; |
| // TRANSLATORS: Y Accuracy |
| "y-accuracy" = "Y Accuracy"; |
| // TRANSLATORS: Y Dimension |
| "y-dimension" = "Y Dimension"; |
| // TRANSLATORS: Y Offset |
| "y-offset" = "Y Offset"; |
| // TRANSLATORS: Y Origin |
| "y-origin" = "Y Origin"; |
| // TRANSLATORS: Z Accuracy |
| "z-accuracy" = "Z Accuracy"; |
| // TRANSLATORS: Z Dimension |
| "z-dimension" = "Z Dimension"; |
| // TRANSLATORS: Z Offset |
| "z-offset" = "Z Offset"; |
| "{service_domain} Domain name" = "{service_domain} Domain name"; |
| "{service_hostname} Fully-qualified domain name" = "{service_hostname} Fully-qualified domain name"; |
| "{service_name} Service instance name" = "{service_name} Service instance name"; |
| "{service_port} Port number" = "{service_port} Port number"; |
| "{service_regtype} DNS-SD registration type" = "{service_regtype} DNS-SD registration type"; |
| "{service_scheme} URI scheme" = "{service_scheme} URI scheme"; |
| "{service_uri} URI" = "{service_uri} URI"; |
| "{txt_*} Value of TXT record key" = "{txt_*} Value of TXT record key"; |
| "{} URI" = "{} URI"; |
| "~/.cups/lpoptions file names default destination that does not exist." = "~/.cups/lpoptions file names default destination that does not exist."; |