Merged changes from branches/1.5-xserver (revision range 2432:2631) back to trunk.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@2 632fc199-4ca6-4c93-a231-07263d6284db
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..b63c602
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,14 @@
+noinst_LTLIBRARIES = libjpeg.la
+
+HDRS = jchuff.h jdct.h jdhuff.h jinclude.h jmemsys.h jpegint.h jpeglib.h \
+ jversion.h
+
+libjpeg_la_SOURCES = $(HDRS) jcapimin.c jcapistd.c jccoefct.c jccolor.c \
+ jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+ jcomapi.c jcparam.c jcphuff.c jcprepct.c jcsample.c jctrans.c \
+ jdapimin.c jdapistd.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+ jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+ jdmerge.c jdphuff.c jdpostct.c jdsample.c jdtrans.c jerror.c \
+ jfdctflt.c jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c \
+ jidctred.c jquant1.c jquant2.c jutils.c jmemmgr.c jmemnobs.c
+
diff --git a/config.guess b/config.guess
deleted file mode 100755
index 413ed41..0000000
--- a/config.guess
+++ /dev/null
@@ -1,883 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Written by Per Bothner <bothner@cygnus.com>.
-# The master version of this file is at the FSF in /home/gd/gnu/lib.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit system type (host/target name).
-#
-# Only a few systems have been added to this list; please add others
-# (but try to keep the structure clean).
-#
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 8/24/94.)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- cat <<EOF >dummy.s
- .globl main
- .ent main
-main:
- .frame \$30,0,\$26,0
- .prologue 0
- .long 0x47e03d80 # implver $0
- lda \$2,259
- .long 0x47e20c21 # amask $2,$1
- srl \$1,8,\$2
- sll \$2,2,\$2
- sll \$0,3,\$0
- addl \$1,\$0,\$0
- addl \$2,\$0,\$0
- ret \$31,(\$26),1
- .end main
-EOF
- ${CC-cc} dummy.s -o dummy 2>/dev/null
- if test "$?" = 0 ; then
- ./dummy
- case "$?" in
- 7)
- UNAME_MACHINE="alpha"
- ;;
- 15)
- UNAME_MACHINE="alphaev5"
- ;;
- 14)
- UNAME_MACHINE="alphaev56"
- ;;
- 10)
- UNAME_MACHINE="alphapca56"
- ;;
- 16)
- UNAME_MACHINE="alphaev6"
- ;;
- esac
- fi
- rm -f dummy.s dummy
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]`
- exit 0 ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit 0 ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-cbm-sysv4
- exit 0;;
- amiga:NetBSD:*:*)
- echo m68k-cbm-netbsd${UNAME_RELEASE}
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc64:OpenBSD:*:*)
- echo mips64el-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hkmips:OpenBSD:*:*)
- echo mips-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mips-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
- arm32:NetBSD:*:*)
- echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- exit 0 ;;
- SR2?01:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
- Pyramid*:OSx*:*:*|MIS*:OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit 0 ;;
- NILE:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit 0 ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit 0 ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
- atari*:NetBSD:*:*)
- echo m68k-atari-netbsd${UNAME_RELEASE}
- exit 0 ;;
- atari*:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3*:NetBSD:*:*)
- echo m68k-sun-netbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3*:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:NetBSD:*:*)
- echo m68k-apple-netbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit 0 ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- 2020:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- sed 's/^ //' << EOF >dummy.c
- int main (argc, argv) int argc; char **argv; {
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- ${CC-cc} dummy.c -o dummy \
- && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
- echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit 0 ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit 0 ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit 0 ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit 0 ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
- -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit 0 ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit 0 ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit 0 ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit 0 ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit 0 ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i?86:AIX:*:*)
- echo i386-ibm-aix
- exit 0 ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- sed 's/^ //' << EOF >dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
- echo rs6000-ibm-aix3.2.5
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit 0 ;;
- *:AIX:*:4)
- if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=4.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit 0 ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit 0 ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit 0 ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit 0 ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit 0 ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit 0 ;;
- 9000/[3478]??:HP-UX:*:*)
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;;
- 9000/8?? ) HP_ARCH=hppa1.0 ;;
- esac
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
- 3050*:HI-UX:*:*)
- sed 's/^ //' << EOF >dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
- echo unknown-hitachi-hiuxwe2
- exit 0 ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit 0 ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit 0 ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit 0 ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit 0 ;;
- i?86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit 0 ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit 0 ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit 0 ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit 0 ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit 0 ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit 0 ;;
- CRAY*X-MP:*:*:*)
- echo xmp-cray-unicos
- exit 0 ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE}
- exit 0 ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
- exit 0 ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE}
- exit 0 ;;
- CRAY-2:*:*:*)
- echo cray2-cray-unicos
- exit 0 ;;
- F300:UNIX_System_V:*:*)
- FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
- F301:UNIX_System_V:*:*)
- echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
- exit 0 ;;
- hp3[0-9][05]:NetBSD:*:*)
- echo m68k-hp-netbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- i?86:BSD/386:*:* | *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:FreeBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit 0 ;;
- *:NetBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- exit 0 ;;
- *:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- exit 0 ;;
- i*:CYGWIN*:*)
- echo i386-pc-cygwin32
- exit 0 ;;
- i*:MINGW*:*)
- echo i386-pc-mingw32
- exit 0 ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin32
- exit 0 ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- *:GNU:*:*)
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
- *:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us.
- ld_help_string=`ld --help 2>&1`
- ld_supported_emulations=`echo $ld_help_string \
- | sed -ne '/supported emulations:/!d
- s/[ ][ ]*/ /g
- s/.*supported emulations: *//
- s/ .*//
- p'`
- case "$ld_supported_emulations" in
- i?86linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 ;;
- i?86coff) echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 ;;
- sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
- m68klinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
- elf32ppc) echo "powerpc-unknown-linux-gnu" ; exit 0 ;;
- esac
-
- if test "${UNAME_MACHINE}" = "alpha" ; then
- sed 's/^ //' <<EOF >dummy.s
- .globl main
- .ent main
- main:
- .frame \$30,0,\$26,0
- .prologue 0
- .long 0x47e03d80 # implver $0
- lda \$2,259
- .long 0x47e20c21 # amask $2,$1
- srl \$1,8,\$2
- sll \$2,2,\$2
- sll \$0,3,\$0
- addl \$1,\$0,\$0
- addl \$2,\$0,\$0
- ret \$31,(\$26),1
- .end main
-EOF
- LIBC=""
- ${CC-cc} dummy.s -o dummy 2>/dev/null
- if test "$?" = 0 ; then
- ./dummy
- case "$?" in
- 7)
- UNAME_MACHINE="alpha"
- ;;
- 15)
- UNAME_MACHINE="alphaev5"
- ;;
- 14)
- UNAME_MACHINE="alphaev56"
- ;;
- 10)
- UNAME_MACHINE="alphapca56"
- ;;
- 16)
- UNAME_MACHINE="alphaev6"
- ;;
- esac
-
- objdump --private-headers dummy | \
- grep ld.so.1 > /dev/null
- if test "$?" = 0 ; then
- LIBC="libc1"
- fi
- fi
- rm -f dummy.s dummy
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
- elif test "${UNAME_MACHINE}" = "mips" ; then
- cat >dummy.c <<EOF
-main(argc, argv)
- int argc;
- char *argv[];
-{
-#ifdef __MIPSEB__
- printf ("%s-unknown-linux-gnu\n", argv[1]);
-#endif
-#ifdef __MIPSEL__
- printf ("%sel-unknown-linux-gnu\n", argv[1]);
-#endif
- return 0;
-}
-EOF
- ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
- else
- # Either a pre-BFD a.out linker (linux-gnuoldld)
- # or one that does not give us useful --help.
- # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
- # If ld does not provide *any* "supported emulations:"
- # that means it is gnuoldld.
- echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
- test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
-
- case "${UNAME_MACHINE}" in
- i?86)
- VENDOR=pc;
- ;;
- *)
- VENDOR=unknown;
- ;;
- esac
- # Determine whether the default compiler is a.out or elf
- cat >dummy.c <<EOF
-#include <features.h>
-main(argc, argv)
- int argc;
- char *argv[];
-{
-#ifdef __ELF__
-# ifdef __GLIBC__
-# if __GLIBC__ >= 2
- printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
-# else
- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-# endif
-# else
- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-# endif
-#else
- printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
-#endif
- return 0;
-}
-EOF
- ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
- fi ;;
-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
-# are messed up and put the nodename in both sysname and nodename.
- i?86:DYNIX/ptx:4*:*)
- echo i386-sequent-sysv4
- exit 0 ;;
- i?86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
- i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
- fi
- exit 0 ;;
- i?86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit 0 ;;
- pc:*:*:*)
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit 0 ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit 0 ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit 0 ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit 0 ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit 0 ;;
- M68*:*:R3V[567]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
- m68*:LynxOS:2.*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit 0 ;;
- i?86:LynxOS:2.*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit 0 ;;
- PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit 0 ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit 0 ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit 0 ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
- news*:NEWS-OS:*:6*)
- echo mips-sony-newsos6
- exit 0 ;;
- R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-cat >dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-#if !defined (ultrix)
- printf ("vax-dec-bsd\n"); exit (0);
-#else
- printf ("vax-dec-ultrix\n"); exit (0);
-#endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
-rm -f dummy.c dummy
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit 0 ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- c34*)
- echo c34-convex-bsd
- exit 0 ;;
- c38*)
- echo c38-convex-bsd
- exit 0 ;;
- c4*)
- echo c4-convex-bsd
- exit 0 ;;
- esac
-fi
-
-#echo '(Unable to guess system type)' 1>&2
-
-exit 1
diff --git a/config.sub b/config.sub
deleted file mode 100755
index 213a6d4..0000000
--- a/config.sub
+++ /dev/null
@@ -1,954 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script, version 1.1.
-# Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-if [ x$1 = x ]
-then
- echo Configuration name missing. 1>&2
- echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
- echo "or $0 ALIAS" 1>&2
- echo where ALIAS is a recognized configuration type. 1>&2
- exit 1
-fi
-
-# First pass through any local machine types.
-case $1 in
- *local*)
- echo $1
- exit 0
- ;;
- *)
- ;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- linux-gnu*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple)
- os=
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco5)
- os=sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
- | arme[lb] | pyramid | mn10200 | mn10300 \
- | tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \
- | alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \
- | i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
- | mips64 | mipsel | mips64el | mips64orion | mips64orionel \
- | mipstx39 | mipstx39el \
- | sparc | sparclet | sparclite | sparc64 | v850)
- basic_machine=$basic_machine-unknown
- ;;
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i[3456]86)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- vax-* | tahoe-* | i[3456]86-* | i860-* | m32r-* | m68k-* | m68000-* \
- | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
- | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
- | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* \
- | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \
- | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
- | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
- | sparc64-* | mips64-* | mipsel-* \
- | mips64el-* | mips64orion-* | mips64orionel-* \
- | mipstx39-* | mipstx39el-* \
- | f301-*)
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-cbm
- ;;
- amigaos | amigados)
- basic_machine=m68k-cbm
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-cbm
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- cray2)
- basic_machine=cray2-cray
- os=-unicos
- ;;
- [ctj]90-cray)
- basic_machine=c90-cray
- os=-unicos
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- os=-mvs
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i[3456]86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i[3456]86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i[3456]86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i[3456]86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- mipsel*-linux*)
- basic_machine=mipsel-unknown
- os=-linux-gnu
- ;;
- mips*-linux*)
- basic_machine=mips-unknown
- os=-linux-gnu
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pentium | p5)
- basic_machine=i586-intel
- ;;
- pentiumpro | p6)
- basic_machine=i686-intel
- ;;
- pentium-* | p5-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- k5)
- # We don't have specific support for AMD's K5 yet, so just call it a Pentium
- basic_machine=i586-amd
- ;;
- nexen)
- # We don't have specific support for Nexgen yet, so just call it a Pentium
- basic_machine=i586-nexgen
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=rs6000-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- xmp)
- basic_machine=xmp-cray
- os=-unicos
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- mips)
- if [ x$os = x-linux-gnu ]; then
- basic_machine=mips-unknown
- else
- basic_machine=mips-mips
- fi
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sparc)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -xenix)
- os=-xenix
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-semi)
- os=-aout
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-ibm)
- os=-aix
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f301-fujitsu)
- os=-uxpv
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -aix*)
- vendor=ibm
- ;;
- -hpux*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -vxsim* | -vxworks*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
diff --git a/configure b/configure
deleted file mode 100755
index 35c9db5..0000000
--- a/configure
+++ /dev/null
@@ -1,2011 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
- --enable-shared build shared library using GNU libtool"
-ac_help="$ac_help
- --enable-static build static library using GNU libtool"
-ac_help="$ac_help
- --enable-maxmem[=N] enable use of temp files, set max mem usage to N MB"
-ac_help="$ac_help
-"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
- ac_prev=
- continue
- fi
-
- case "$ac_option" in
- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
- *) ac_optarg= ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case "$ac_option" in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir="$ac_optarg" ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build="$ac_optarg" ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file="$ac_optarg" ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
- datadir="$ac_optarg" ;;
-
- -disable-* | --disable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- eval "enable_${ac_feature}=no" ;;
-
- -enable-* | --enable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_${ac_feature}='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix="$ac_optarg" ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he)
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
- --cache-file=FILE cache test results in FILE
- --help print this message
- --no-create do not create output files
- --quiet, --silent do not print \`checking...' messages
- --version print the version of autoconf that created configure
-Directory and file names:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [same as prefix]
- --bindir=DIR user executables in DIR [EPREFIX/bin]
- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data in DIR
- [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data in DIR
- [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
- --includedir=DIR C header files in DIR [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
- --infodir=DIR info documentation in DIR [PREFIX/info]
- --mandir=DIR man documentation in DIR [PREFIX/man]
- --srcdir=DIR find the sources in DIR [configure dir or ..]
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM
- run sed PROGRAM on installed program names
-EOF
- cat << EOF
-Host type:
- --build=BUILD configure for building on BUILD [BUILD=HOST]
- --host=HOST configure for HOST [guessed]
- --target=TARGET configure for TARGET [TARGET=HOST]
-Features and packages:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --x-includes=DIR X include files are in DIR
- --x-libraries=DIR X library files are in DIR
-EOF
- if test -n "$ac_help"; then
- echo "--enable and --with options recognized:$ac_help"
- fi
- exit 0 ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host="$ac_optarg" ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir="$ac_optarg" ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir="$ac_optarg" ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir="$ac_optarg" ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir="$ac_optarg" ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir="$ac_optarg" ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir="$ac_optarg" ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir="$ac_optarg" ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix="$ac_optarg" ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix="$ac_optarg" ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix="$ac_optarg" ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name="$ac_optarg" ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir="$ac_optarg" ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir="$ac_optarg" ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site="$ac_optarg" ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir="$ac_optarg" ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir="$ac_optarg" ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target="$ac_optarg" ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
- exit 0 ;;
-
- -with-* | --with-*)
- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
- *) ac_optarg=yes ;;
- esac
- eval "with_${ac_package}='$ac_optarg'" ;;
-
- -without-* | --without-*)
- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- eval "with_${ac_package}=no" ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes="$ac_optarg" ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries="$ac_optarg" ;;
-
- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
- ;;
-
- *=*)
- varname=`echo "$ac_option"|sed -e 's/=.*//'`
- # Reject names that aren't valid shell variable names.
- if test -n "`echo $varname| sed 's/[a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $varname: invalid shell variable name" 1>&2; exit 1; }
- fi
- val="`echo "$ac_option"|sed 's/[^=]*=//'`"
- test -n "$verbose" && echo " setting shell variable $varname to $val"
- eval "$varname='$val'"
- eval "export $varname" ;;
-
- *)
- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
- echo "configure: warning: $ac_option: invalid host type" 1>&2
- fi
- if test "x$nonopt" != xNONE; then
- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
- fi
- nonopt="$ac_option"
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
- exec 6>/dev/null
-else
- exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
- case "$ac_arg" in
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c) ;;
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
- esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=jcmaster.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_prog=$0
- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
- else
- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
- fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
-fi
-for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
- echo "loading site script $ac_site_file"
- . "$ac_site_file"
- fi
-done
-
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
- ac_n= ac_c='
-' ac_t=' '
- else
- ac_n=-n ac_c= ac_t=
- fi
-else
- ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:538: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:567: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- ac_prog_rejected=no
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# -gt 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- set dummy "$ac_dir/$ac_word" "$@"
- shift
- ac_cv_prog_CC="$@"
- fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:615: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 625 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:649: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:654: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:663: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gcc=yes
-else
- ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
- GCC=yes
- test "${CFLAGS+set}" = set || CFLAGS="-O2"
-else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-O"
-fi
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:681: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 696 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:702: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 713 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:719: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
-fi
- CPP="$ac_cv_prog_CPP"
-else
- ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
-echo $ac_n "checking for function prototypes""... $ac_c" 1>&6
-echo "configure:742: checking for function prototypes" >&5
-if eval "test \"`echo '$''{'ijg_cv_have_prototypes'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 747 "configure"
-#include "confdefs.h"
-
-int testfunction (int arg1, int * arg2); /* check prototypes */
-struct methods_struct { /* check method-pointer declarations */
- int (*error_exit) (char *msgtext);
- int (*trace_message) (char *msgtext);
- int (*another_method) (void);
-};
-int testfunction (int arg1, int * arg2) /* check definitions */
-{ return arg2[arg1]; }
-int test2function (void) /* check void arg list */
-{ return 0; }
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:765: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ijg_cv_have_prototypes=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ijg_cv_have_prototypes=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ijg_cv_have_prototypes" 1>&6
-if test $ijg_cv_have_prototypes = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_PROTOTYPES
-EOF
-
-else
- echo Your compiler does not seem to know about function prototypes.
- echo Perhaps it needs a special switch to enable ANSI C mode.
- echo If so, we recommend running configure like this:
- echo " ./configure CC='cc -switch'"
- echo where -switch is the proper switch.
-fi
-ac_safe=`echo "stddef.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for stddef.h""... $ac_c" 1>&6
-echo "configure:792: checking for stddef.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 797 "configure"
-#include "confdefs.h"
-#include <stddef.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:802: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_STDDEF_H
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
-ac_safe=`echo "stdlib.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for stdlib.h""... $ac_c" 1>&6
-echo "configure:828: checking for stdlib.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 833 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_STDLIB_H
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
-ac_safe=`echo "string.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for string.h""... $ac_c" 1>&6
-echo "configure:864: checking for string.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 869 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define NEED_BSD_STRINGS
-EOF
-
-fi
-
-echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:900: checking for size_t" >&5
-cat > conftest.$ac_ext <<EOF
-#line 902 "configure"
-#include "confdefs.h"
-
-#ifdef HAVE_STDDEF_H
-#include <stddef.h>
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#include <stdio.h>
-#ifdef NEED_BSD_STRINGS
-#include <strings.h>
-#else
-#include <string.h>
-#endif
-typedef size_t my_size_t;
-
-int main() {
- my_size_t foovar;
-; return 0; }
-EOF
-if { (eval echo configure:923: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ijg_size_t_ok=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h"
-fi
-rm -f conftest*
-echo "$ac_t""$ijg_size_t_ok" 1>&6
-if test "$ijg_size_t_ok" != yes; then
-ac_safe=`echo "sys/types.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for sys/types.h""... $ac_c" 1>&6
-echo "configure:937: checking for sys/types.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 942 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:947: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define NEED_SYS_TYPES_H
-EOF
-
-cat > conftest.$ac_ext <<EOF
-#line 968 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "size_t" >/dev/null 2>&1; then
- rm -rf conftest*
- ijg_size_t_ok="size_t is in sys/types.h"
-else
- rm -rf conftest*
- ijg_size_t_ok=no
-fi
-rm -f conftest*
-
-else
- echo "$ac_t""no" 1>&6
-ijg_size_t_ok=no
-fi
-
-echo "$ac_t""$ijg_size_t_ok" 1>&6
-if test "$ijg_size_t_ok" = no; then
- echo Type size_t is not defined in any of the usual places.
- echo Try putting '"typedef unsigned int size_t;"' in jconfig.h.
-fi
-fi
-echo $ac_n "checking for type unsigned char""... $ac_c" 1>&6
-echo "configure:994: checking for type unsigned char" >&5
-cat > conftest.$ac_ext <<EOF
-#line 996 "configure"
-#include "confdefs.h"
-
-int main() {
- unsigned char un_char;
-; return 0; }
-EOF
-if { (eval echo configure:1003: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
-cat >> confdefs.h <<\EOF
-#define HAVE_UNSIGNED_CHAR
-EOF
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-fi
-rm -f conftest*
-echo $ac_n "checking for type unsigned short""... $ac_c" 1>&6
-echo "configure:1018: checking for type unsigned short" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1020 "configure"
-#include "confdefs.h"
-
-int main() {
- unsigned short un_short;
-; return 0; }
-EOF
-if { (eval echo configure:1027: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
-cat >> confdefs.h <<\EOF
-#define HAVE_UNSIGNED_SHORT
-EOF
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-fi
-rm -f conftest*
-echo $ac_n "checking for type void""... $ac_c" 1>&6
-echo "configure:1042: checking for type void" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1044 "configure"
-#include "confdefs.h"
-
-/* Caution: a C++ compiler will insist on valid prototypes */
-typedef void * void_ptr; /* check void * */
-#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */
-typedef void (*void_func) (int a, int b);
-#else
-typedef void (*void_func) ();
-#endif
-
-#ifdef HAVE_PROTOTYPES /* check void function result */
-void test3function (void_ptr arg1, void_func arg2)
-#else
-void test3function (arg1, arg2)
- void_ptr arg1;
- void_func arg2;
-#endif
-{
- char * locptr = (char *) arg1; /* check casting to and from void * */
- arg1 = (void *) locptr;
- (*arg2) (1, 2); /* check call of fcn returning void */
-}
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:1072: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define void char
-EOF
-
-fi
-rm -f conftest*
-
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1088: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1093 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this. */
-typedef int charset[2]; const charset x;
-/* SunOS 4.1.1 cc rejects this. */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this. */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in an arm
- of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:1142: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c_const=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c_const=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_const" 1>&6
-if test $ac_cv_c_const = no; then
- cat >> confdefs.h <<\EOF
-#define const
-EOF
-
-fi
-
-echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1163: checking for inline" >&5
-ijg_cv_inline=""
-cat > conftest.$ac_ext <<EOF
-#line 1166 "configure"
-#include "confdefs.h"
-
-int main() {
-} __inline__ int foo() { return 0; }
-int bar() { return foo();
-; return 0; }
-EOF
-if { (eval echo configure:1174: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ijg_cv_inline="__inline__"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- cat > conftest.$ac_ext <<EOF
-#line 1182 "configure"
-#include "confdefs.h"
-
-int main() {
-} __inline int foo() { return 0; }
-int bar() { return foo();
-; return 0; }
-EOF
-if { (eval echo configure:1190: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ijg_cv_inline="__inline"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- cat > conftest.$ac_ext <<EOF
-#line 1198 "configure"
-#include "confdefs.h"
-
-int main() {
-} inline int foo() { return 0; }
-int bar() { return foo();
-; return 0; }
-EOF
-if { (eval echo configure:1206: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ijg_cv_inline="inline"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-echo "$ac_t""$ijg_cv_inline" 1>&6
-cat >> confdefs.h <<EOF
-#define INLINE $ijg_cv_inline
-EOF
-
-echo $ac_n "checking for broken incomplete types""... $ac_c" 1>&6
-echo "configure:1224: checking for broken incomplete types" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1226 "configure"
-#include "confdefs.h"
- typedef struct undefined_structure * undef_struct_ptr;
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:1233: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- echo "$ac_t""ok" 1>&6
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""broken" 1>&6
-cat >> confdefs.h <<\EOF
-#define INCOMPLETE_TYPES_BROKEN
-EOF
-
-fi
-rm -f conftest*
-echo $ac_n "checking for short external names""... $ac_c" 1>&6
-echo "configure:1248: checking for short external names" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1250 "configure"
-#include "confdefs.h"
-
-int possibly_duplicate_function () { return 0; }
-int possibly_dupli_function () { return 1; }
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:1260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- rm -rf conftest*
- echo "$ac_t""ok" 1>&6
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""short" 1>&6
-cat >> confdefs.h <<\EOF
-#define NEED_SHORT_EXTERNAL_NAMES
-EOF
-
-fi
-rm -f conftest*
-echo $ac_n "checking to see if char is signed""... $ac_c" 1>&6
-echo "configure:1275: checking to see if char is signed" >&5
-if test "$cross_compiling" = yes; then
- echo Assuming that char is signed on target machine.
-echo If it is unsigned, this will be a little bit inefficient.
-
-else
- cat > conftest.$ac_ext <<EOF
-#line 1282 "configure"
-#include "confdefs.h"
-
-#ifdef HAVE_PROTOTYPES
-int is_char_signed (int arg)
-#else
-int is_char_signed (arg)
- int arg;
-#endif
-{
- if (arg == 189) { /* expected result for unsigned char */
- return 0; /* type char is unsigned */
- }
- else if (arg != -67) { /* expected result for signed char */
- printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
- printf("I fear the JPEG software will not work at all.\n\n");
- }
- return 1; /* assume char is signed otherwise */
-}
-char signed_char_check = (char) (-67);
-main() {
- exit(is_char_signed((int) signed_char_check));
-}
-EOF
-if { (eval echo configure:1306: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define CHAR_IS_UNSIGNED
-EOF
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- echo "$ac_t""yes" 1>&6
-fi
-rm -fr conftest*
-fi
-
-echo $ac_n "checking to see if right shift is signed""... $ac_c" 1>&6
-echo "configure:1323: checking to see if right shift is signed" >&5
-if test "$cross_compiling" = yes; then
- echo "$ac_t""Assuming that right shift is signed on target machine." 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1328 "configure"
-#include "confdefs.h"
-
-#ifdef HAVE_PROTOTYPES
-int is_shifting_signed (long arg)
-#else
-int is_shifting_signed (arg)
- long arg;
-#endif
-/* See whether right-shift on a long is signed or not. */
-{
- long res = arg >> 4;
-
- if (res == -0x7F7E80CL) { /* expected result for signed shift */
- return 1; /* right shift is signed */
- }
- /* see if unsigned-shift hack will fix it. */
- /* we can't just test exact value since it depends on width of long... */
- res |= (~0L) << (32-4);
- if (res == -0x7F7E80CL) { /* expected result now? */
- return 0; /* right shift is unsigned */
- }
- printf("Right shift isn't acting as I expect it to.\n");
- printf("I fear the JPEG software will not work at all.\n\n");
- return 0; /* try it with unsigned anyway */
-}
-main() {
- exit(is_shifting_signed(-0x7F7E80B1L));
-}
-EOF
-if { (eval echo configure:1358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define RIGHT_SHIFT_IS_UNSIGNED
-EOF
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- echo "$ac_t""yes" 1>&6
-fi
-rm -fr conftest*
-fi
-
-echo $ac_n "checking to see if fopen accepts b spec""... $ac_c" 1>&6
-echo "configure:1375: checking to see if fopen accepts b spec" >&5
-if test "$cross_compiling" = yes; then
- echo "$ac_t""Assuming that it does." 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1380 "configure"
-#include "confdefs.h"
-
-#include <stdio.h>
-main() {
- if (fopen("conftestdata", "wb") != NULL)
- exit(0);
- exit(1);
-}
-EOF
-if { (eval echo configure:1390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
- echo "$ac_t""yes" 1>&6
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define DONT_USE_B_MODE
-EOF
-
-fi
-rm -fr conftest*
-fi
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1436: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- for ac_prog in ginstall installbsd scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- # OSF/1 installbsd also uses dspmsg, but is usable.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
- ;;
- esac
- done
- IFS="$ac_save_IFS"
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
- fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1488: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-# Decide whether to use libtool,
-# and if so whether to build shared, static, or both flavors of library.
-LTSHARED="no"
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- LTSHARED="$enableval"
-fi
-
-LTSTATIC="no"
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
- enableval="$enable_static"
- LTSTATIC="$enableval"
-fi
-
-if test "x$LTSHARED" != xno -o "x$LTSTATIC" != xno; then
- USELIBTOOL="yes"
- LIBTOOL="./libtool"
- O="lo"
- A="la"
- LN='$(LIBTOOL) --mode=link $(CC)'
- INSTALL_LIB='$(LIBTOOL) --mode=install ${INSTALL}'
- INSTALL_PROGRAM="\$(LIBTOOL) --mode=install $INSTALL_PROGRAM"
-else
- USELIBTOOL="no"
- LIBTOOL=""
- O="o"
- A="a"
- LN='$(CC)'
- INSTALL_LIB="$INSTALL_DATA"
-fi
-
-
-
-
-
-
-# Configure libtool if needed.
-if test $USELIBTOOL = yes; then
- disable_shared=
- disable_static=
- if test "x$LTSHARED" = xno; then
- disable_shared="--disable-shared"
- fi
- if test "x$LTSTATIC" = xno; then
- disable_static="--disable-static"
- fi
- $srcdir/ltconfig $disable_shared $disable_static $srcdir/ltmain.sh
-fi
-
-# Select memory manager depending on user input.
-# If no "-enable-maxmem", use jmemnobs
-MEMORYMGR='jmemnobs.$(O)'
-MAXMEM="no"
-# Check whether --enable-maxmem or --disable-maxmem was given.
-if test "${enable_maxmem+set}" = set; then
- enableval="$enable_maxmem"
- MAXMEM="$enableval"
-fi
-
-# support --with-maxmem for backwards compatibility with IJG V5.
-# Check whether --with-maxmem or --without-maxmem was given.
-if test "${with_maxmem+set}" = set; then
- withval="$with_maxmem"
- MAXMEM="$withval"
-fi
-
-if test "x$MAXMEM" = xyes; then
- MAXMEM=1
-fi
-if test "x$MAXMEM" != xno; then
- if test -n "`echo $MAXMEM | sed 's/[0-9]//g'`"; then
- { echo "configure: error: non-numeric argument to --enable-maxmem" 1>&2; exit 1; }
- fi
- DEFAULTMAXMEM=`expr $MAXMEM \* 1048576`
-cat >> confdefs.h <<EOF
-#define DEFAULT_MAX_MEM ${DEFAULTMAXMEM}
-EOF
-
-echo $ac_n "checking for 'tmpfile()'""... $ac_c" 1>&6
-echo "configure:1596: checking for 'tmpfile()'" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1598 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-int main() {
- FILE * tfile = tmpfile();
-; return 0; }
-EOF
-if { (eval echo configure:1605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
-MEMORYMGR='jmemansi.$(O)'
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-MEMORYMGR='jmemname.$(O)'
-cat >> confdefs.h <<\EOF
-#define NEED_SIGNAL_CATCHER
-EOF
-
-echo $ac_n "checking for 'mktemp()'""... $ac_c" 1>&6
-echo "configure:1620: checking for 'mktemp()'" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1622 "configure"
-#include "confdefs.h"
-
-int main() {
- char fname[80]; mktemp(fname);
-; return 0; }
-EOF
-if { (eval echo configure:1629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define NO_MKTEMP
-EOF
-
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-
-
-# Extract the library version ID from jpeglib.h.
-echo $ac_n "checking libjpeg version number""... $ac_c" 1>&6
-echo "configure:1650: checking libjpeg version number" >&5
-JPEG_LIB_VERSION=`sed -e '/^#define JPEG_LIB_VERSION/!d' -e 's/^[^0-9]*\([0-9][0-9]*\).*$/\1/' $srcdir/jpeglib.h`
-echo "$ac_t""$JPEG_LIB_VERSION" 1>&6
-
-
-# Prepare to massage makefile.cfg correctly.
-if test $ijg_cv_have_prototypes = yes; then
- A2K_DEPS=""
- COM_A2K="# "
-else
- A2K_DEPS="ansi2knr"
- COM_A2K=""
-fi
-
-
-# ansi2knr needs -DBSD if string.h is missing
-if test $ac_cv_header_string_h = no; then
- ANSI2KNRFLAGS="-DBSD"
-else
- ANSI2KNRFLAGS=""
-fi
-
-# Substitutions to enable or disable libtool-related stuff
-if test $USELIBTOOL = yes -a $ijg_cv_have_prototypes = yes; then
- COM_LT=""
-else
- COM_LT="# "
-fi
-
-if test "x$LTSHARED" != xno; then
- FORCE_INSTALL_LIB="install-lib"
-else
- FORCE_INSTALL_LIB=""
-fi
-
-# Set up -I directives
-if test "x$srcdir" = x.; then
- INCLUDEFLAGS='-I$(srcdir)'
-else
- INCLUDEFLAGS='-I. -I$(srcdir)'
-fi
-
-trap '' 1 2 15
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-DEFS=-DHAVE_CONFIG_H
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
- case "\$ac_option" in
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
- exit 0 ;;
- -help | --help | --hel | --he | --h)
- echo "\$ac_cs_usage"; exit 0 ;;
- *) echo "\$ac_cs_usage"; exit 1 ;;
- esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile:makefile.cfg jconfig.h:jconfig.cfg" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@CC@%$CC%g
-s%@CPP@%$CPP%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@RANLIB@%$RANLIB%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@O@%$O%g
-s%@A@%$A%g
-s%@LN@%$LN%g
-s%@INSTALL_LIB@%$INSTALL_LIB%g
-s%@MEMORYMGR@%$MEMORYMGR%g
-s%@JPEG_LIB_VERSION@%$JPEG_LIB_VERSION%g
-s%@A2K_DEPS@%$A2K_DEPS%g
-s%@COM_A2K@%$COM_A2K%g
-s%@ANSI2KNRFLAGS@%$ANSI2KNRFLAGS%g
-s%@COM_LT@%$COM_LT%g
-s%@FORCE_INSTALL_LIB@%$FORCE_INSTALL_LIB%g
-s%@INCLUDEFLAGS@%$INCLUDEFLAGS%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile:makefile.cfg"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- *) ac_file_in="${ac_file}.in" ;;
- esac
-
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- # The file is in a subdirectory.
- test ! -d "$ac_dir" && mkdir "$ac_dir"
- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
- # A "../" for each directory in $ac_dir_suffix.
- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
- else
- ac_dir_suffix= ac_dots=
- fi
-
- case "$ac_given_srcdir" in
- .) srcdir=.
- if test -z "$ac_dots"; then top_srcdir=.
- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
- *) # Relative path.
- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
- top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
-
- case "$ac_given_INSTALL" in
- [/$]*) INSTALL="$ac_given_INSTALL" ;;
- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
- esac
-
- echo creating "$ac_file"
- rm -f "$ac_file"
- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
- case "$ac_file" in
- *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
- *) ac_comsub= ;;
- esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_uB='\([ ]\)%\1#\2define\3'
-ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
-
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="jconfig.h:jconfig.cfg"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- *) ac_file_in="${ac_file}.in" ;;
- esac
-
- echo creating $ac_file
-
- rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
-
-EOF
-
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h. And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
-
-# This sed command replaces #undef with comments. This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-EOF
-
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
-
-rm -f conftest.tail
-while :
-do
- ac_lines=`grep -c . conftest.vals`
- # grep -c gives empty output for an empty file on some AIX systems.
- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
- # Write a limited-size here document to conftest.frag.
- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
- echo 'CEOF
- sed -f conftest.frag conftest.in > conftest.out
- rm -f conftest.in
- mv conftest.out conftest.in
-' >> $CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
- rm -f conftest.vals
- mv conftest.tail conftest.vals
-done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
- rm -f conftest.frag conftest.h
- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
- cat conftest.in >> conftest.h
- rm -f conftest.in
- if cmp -s $ac_file conftest.h 2>/dev/null; then
- echo "$ac_file is unchanged"
- rm -f conftest.h
- else
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- # The file is in a subdirectory.
- test ! -d "$ac_dir" && mkdir "$ac_dir"
- fi
- rm -f $ac_file
- mv conftest.h $ac_file
- fi
-fi; done
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..b8ada44
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,80 @@
+# -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ([2.61])
+AC_INIT([libjpeg], [6.b])
+
+AM_INIT_AUTOMAKE([-Wall foreign dist-bzip2])
+
+# Always build with prototypes
+AC_DEFINE([HAVE_PROTOTYPES], 1, [Define if your compiler supports prototypes])
+# Don't use undefined types
+AC_DEFINE([INCOMPLETE_TYPES_BROKEN], 1, [Define if you want use complete types])
+
+# Checks for programs.
+AC_PROG_CC
+AC_PROG_INSTALL
+AC_PROG_LIBTOOL
+AC_PROG_LN_S
+
+# Checks for libraries.
+
+# Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS([stddef.h stdlib.h string.h])
+AC_CHECK_HEADER([sys/types.h], AC_DEFINE([NEED_SYS_TYPES_H], 1, [Define if you have sys/types.h]))
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_C_CHAR_UNSIGNED
+AC_C_INLINE
+AC_TYPE_SIZE_T
+AC_CHECK_TYPES([unsigned char, unsigned short])
+
+AC_MSG_CHECKING([if right shift is signed])
+AC_TRY_RUN(
+ [#include <stdio.h>
+ int is_shifting_signed (long arg) {
+ long res = arg >> 4;
+
+ if (res == -0x7F7E80CL)
+ return 1; /* right shift is signed */
+
+ /* see if unsigned-shift hack will fix it. */
+ /* we can't just test exact value since it depends on width of long... */
+ res |= (~0L) << (32-4);
+ if (res == -0x7F7E80CL)
+ return 0; /* right shift is unsigned */
+
+ printf("Right shift isn't acting as I expect it to.\n");
+ printf("I fear the JPEG software will not work at all.\n\n");
+ return 0; /* try it with unsigned anyway */
+ }
+ int main (void) {
+ exit(is_shifting_signed(-0x7F7E80B1L));
+ }],
+ [AC_MSG_RESULT(no)
+ AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED], 1, [Define if shift is unsigned])],
+ [AC_MSG_RESULT(yes)],
+ [AC_MSG_RESULT(Assuming that right shift is signed on target machine.)])
+
+# test whether global names are unique to at least 15 chars
+AC_MSG_CHECKING([for short external names])
+AC_TRY_LINK(
+ [int possibly_duplicate_function () { return 0; }
+ int possibly_dupli_function () { return 1; }], [ ],
+ [AC_MSG_RESULT(ok)],
+ [AC_MSG_RESULT(short)
+ AC_DEFINE([NEED_SHORT_EXTERNAL_NAMES], 1, [Define if you need short function names])])
+
+# Checks for library functions.
+AC_FUNC_MALLOC
+AC_CHECK_FUNCS([memset memcpy], [],
+ [AC_DEFINE([NEED_BSD_STRINGS], 1,
+ [Define if you have BSD-like bzero and bcopy])])
+
+# config.h should not be included
+AC_CONFIG_HEADERS([config.h])
+AC_CONFIG_HEADERS([jconfig.h])
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/install-sh b/install-sh
deleted file mode 100755
index e843669..0000000
--- a/install-sh
+++ /dev/null
@@ -1,250 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- true
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- else
- instcmd=mkdir
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f $src -o -d $src ]
- then
- true
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- true
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- true
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
-
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- true
- fi
-
- pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
- else
- true
- fi
-
-# Make a temp file name in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd $src $dsttmp &&
-
- trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
-
-fi &&
-
-
-exit 0
diff --git a/jchuff.c b/jchuff.c
index f235250..20388bd 100644
--- a/jchuff.c
+++ b/jchuff.c
@@ -297,7 +297,7 @@
* between calls, so 24 bits are sufficient.
*/
-INLINE
+inline
LOCAL(boolean)
emit_bits (working_state * state, unsigned int code, int size)
/* Emit some bits; return TRUE if successful, FALSE if must suspend */
diff --git a/jconfig.cfg b/jconfig.cfg
deleted file mode 100644
index 36a04fa..0000000
--- a/jconfig.cfg
+++ /dev/null
@@ -1,44 +0,0 @@
-/* jconfig.cfg --- source file edited by configure script */
-/* see jconfig.doc for explanations */
-
-#undef HAVE_PROTOTYPES
-#undef HAVE_UNSIGNED_CHAR
-#undef HAVE_UNSIGNED_SHORT
-#undef void
-#undef const
-#undef CHAR_IS_UNSIGNED
-#undef HAVE_STDDEF_H
-#undef HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-/* Define this if you get warnings about undefined structures. */
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-#undef INLINE
-/* These are for configuring the JPEG memory manager. */
-#undef DEFAULT_MAX_MEM
-#undef NO_MKTEMP
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#undef TWO_FILE_COMMANDLINE
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-
-/* Define this if you want percent-done progress reports from cjpeg/djpeg. */
-#undef PROGRESS_REPORT
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jconfig.h b/jconfig.h
deleted file mode 100644
index 7e291c7..0000000
--- a/jconfig.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS /* we presume a 32-bit flat memory model */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-/* Define "boolean" as unsigned char, not int, per Windows custom */
-#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */
-typedef unsigned char boolean;
-#endif
-#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */
-
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE /* optional */
-#define USE_SETMODE /* Microsoft has setmode() */
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT /* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jconfig.h.in b/jconfig.h.in
new file mode 100644
index 0000000..4a10697
--- /dev/null
+++ b/jconfig.h.in
@@ -0,0 +1,46 @@
+/* Define if your compiler supports prototypes */
+#undef HAVE_PROTOTYPES
+
+/* Define to 1 if you have the <stddef.h> header file. */
+#undef HAVE_STDDEF_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if the system has the type `unsigned char'. */
+#undef HAVE_UNSIGNED_CHAR
+
+/* Define to 1 if the system has the type `unsigned short'. */
+#undef HAVE_UNSIGNED_SHORT
+
+/* Define if you want use complete types */
+#undef INCOMPLETE_TYPES_BROKEN
+
+/* Define if you have BSD-like bzero and bcopy */
+#undef NEED_BSD_STRINGS
+
+/* Define if you need short function names */
+#undef NEED_SHORT_EXTERNAL_NAMES
+
+/* Define if you have sys/types.h */
+#undef NEED_SYS_TYPES_H
+
+/* Define if shift is unsigned */
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+/* Define to 1 if type `char' is unsigned and you are not using gcc. */
+#ifndef __CHAR_UNSIGNED__
+# undef __CHAR_UNSIGNED__
+#endif
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+ calls it, or to nothing if 'inline' is not supported under any name. */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
diff --git a/jcphuff.c b/jcphuff.c
index 07f9178..7b235d7 100644
--- a/jcphuff.c
+++ b/jcphuff.c
@@ -223,7 +223,7 @@
* between calls, so 24 bits are sufficient.
*/
-INLINE
+inline
LOCAL(void)
emit_bits (phuff_entropy_ptr entropy, unsigned int code, int size)
/* Emit some bits, unless we are in gather mode */
@@ -276,7 +276,7 @@
* Emit (or just count) a Huffman symbol.
*/
-INLINE
+inline
LOCAL(void)
emit_symbol (phuff_entropy_ptr entropy, int tbl_no, int symbol)
{
diff --git a/jmorecfg.h b/jmorecfg.h
index 54a7d1c..69d4fe0 100644
--- a/jmorecfg.h
+++ b/jmorecfg.h
@@ -62,11 +62,11 @@
#else /* not HAVE_UNSIGNED_CHAR */
typedef char JSAMPLE;
-#ifdef CHAR_IS_UNSIGNED
+#ifdef __CHAR_UNSIGNED__
#define GETJSAMPLE(value) ((int) (value))
#else
#define GETJSAMPLE(value) ((int) (value) & 0xFF)
-#endif /* CHAR_IS_UNSIGNED */
+#endif /* __CHAR_UNSIGNED__ */
#endif /* HAVE_UNSIGNED_CHAR */
@@ -113,11 +113,11 @@
#else /* not HAVE_UNSIGNED_CHAR */
typedef char JOCTET;
-#ifdef CHAR_IS_UNSIGNED
+#ifdef __CHAR_UNSIGNED__
#define GETJOCTET(value) (value)
#else
#define GETJOCTET(value) ((value) & 0xFF)
-#endif /* CHAR_IS_UNSIGNED */
+#endif /* __CHAR_UNSIGNED__ */
#endif /* HAVE_UNSIGNED_CHAR */
@@ -134,11 +134,11 @@
#ifdef HAVE_UNSIGNED_CHAR
typedef unsigned char UINT8;
#else /* not HAVE_UNSIGNED_CHAR */
-#ifdef CHAR_IS_UNSIGNED
+#ifdef __CHAR_UNSIGNED__
typedef char UINT8;
-#else /* not CHAR_IS_UNSIGNED */
+#else /* not __CHAR_UNSIGNED__ */
typedef short UINT8;
-#endif /* CHAR_IS_UNSIGNED */
+#endif /* __CHAR_UNSIGNED__ */
#endif /* HAVE_UNSIGNED_CHAR */
/* UINT16 must hold at least the values 0..65535. */
@@ -319,21 +319,6 @@
/* Definitions for speed-related optimizations. */
-
-/* If your compiler supports inline functions, define INLINE
- * as the inline keyword; otherwise define it as empty.
- */
-
-#ifndef INLINE
-#ifdef __GNUC__ /* for instance, GNU C knows about inline */
-#define INLINE __inline__
-#endif
-#ifndef INLINE
-#define INLINE /* default is to define it as empty */
-#endif
-#endif
-
-
/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying
* two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER
* as short on such a machine. MULTIPLIER must be at least 16 bits wide.