The Independent JPEG Group's JPEG software v5
diff --git a/cjpeg.c b/cjpeg.c
new file mode 100644
index 0000000..33347f3
--- /dev/null
+++ b/cjpeg.c
@@ -0,0 +1,877 @@
+/*
+ * cjpeg.c
+ *
+ * Copyright (C) 1991-1994, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a command-line user interface for the JPEG compressor.
+ * It should work on any system with Unix- or MS-DOS-style command lines.
+ *
+ * Two different command line styles are permitted, depending on the
+ * compile-time switch TWO_FILE_COMMANDLINE:
+ *	cjpeg [options]  inputfile outputfile
+ *	cjpeg [options]  [inputfile]
+ * In the second style, output is always to standard output, which you'd
+ * normally redirect to a file or pipe to some other program.  Input is
+ * either from a named file or from standard input (typically redirected).
+ * The second style is convenient on Unix but is unhelpful on systems that
+ * don't support pipes.  Also, you MUST use the first style if your system
+ * doesn't do binary I/O to stdin/stdout.
+ * To simplify script writing, the "-outfile" switch is provided.  The syntax
+ *	cjpeg [options]  -outfile outputfile  inputfile
+ * works regardless of which command line style is used.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#define JMAKE_MSG_TABLE
+#include "cderror.h"		/* create message string table */
+#include "jversion.h"		/* for version message */
+
+#include <ctype.h>		/* to declare isupper(), tolower() */
+#ifdef NEED_SIGNAL_CATCHER
+#include <signal.h>		/* to declare signal() */
+#endif
+#ifdef USE_SETMODE
+#include <fcntl.h>		/* to declare setmode()'s parameter macros */
+/* If you have setmode() but not <io.h>, just delete this line: */
+#include <io.h>			/* to declare setmode() */
+#endif
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks declares it here */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
+#define READ_BINARY	"r"
+#define WRITE_BINARY	"w"
+#else
+#define READ_BINARY	"rb"
+#define WRITE_BINARY	"wb"
+#endif
+
+#ifndef EXIT_FAILURE		/* define exit() codes if not provided */
+#define EXIT_FAILURE  1
+#endif
+#ifndef EXIT_SUCCESS
+#ifdef VMS
+#define EXIT_SUCCESS  1		/* VMS is very nonstandard */
+#else
+#define EXIT_SUCCESS  0
+#endif
+#endif
+#ifndef EXIT_WARNING
+#ifdef VMS
+#define EXIT_WARNING  1		/* VMS is very nonstandard */
+#else
+#define EXIT_WARNING  2
+#endif
+#endif
+
+
+/*
+ * This routine determines what format the input file is,
+ * and selects the appropriate input-reading module.
+ *
+ * To determine which family of input formats the file belongs to,
+ * we may look only at the first byte of the file, since C does not
+ * guarantee that more than one character can be pushed back with ungetc.
+ * Looking at additional bytes would require one of these approaches:
+ *     1) assume we can fseek() the input file (fails for piped input);
+ *     2) assume we can push back more than one character (works in
+ *        some C implementations, but unportable);
+ *     3) provide our own buffering (breaks input readers that want to use
+ *        stdio directly, such as the RLE library);
+ * or  4) don't put back the data, and modify the input_init methods to assume
+ *        they start reading after the start of file (also breaks RLE library).
+ * #1 is attractive for MS-DOS but is untenable on Unix.
+ *
+ * The most portable solution for file types that can't be identified by their
+ * first byte is to make the user tell us what they are.  This is also the
+ * only approach for "raw" file types that contain only arbitrary values.
+ * We presently apply this method for Targa files.  Most of the time Targa
+ * files start with 0x00, so we recognize that case.  Potentially, however,
+ * a Targa file could start with any byte value (byte 0 is the length of the
+ * seldom-used ID field), so we provide a switch to force Targa input mode.
+ */
+
+static boolean is_targa;	/* records user -targa switch */
+
+
+LOCAL cjpeg_source_ptr
+select_file_type (j_compress_ptr cinfo, FILE * infile)
+{
+  int c;
+
+  if (is_targa) {
+#ifdef TARGA_SUPPORTED
+    return jinit_read_targa(cinfo);
+#else
+    ERREXIT(cinfo, JERR_TGA_NOTCOMP);
+#endif
+  }
+
+  if ((c = getc(infile)) == EOF)
+    ERREXIT(cinfo, JERR_INPUT_EMPTY);
+  if (ungetc(c, infile) == EOF)
+    ERREXIT(cinfo, JERR_UNGETC_FAILED);
+
+  switch (c) {
+#ifdef BMP_SUPPORTED
+  case 'B':
+    return jinit_read_bmp(cinfo);
+#endif
+#ifdef GIF_SUPPORTED
+  case 'G':
+    return jinit_read_gif(cinfo);
+#endif
+#ifdef PPM_SUPPORTED
+  case 'P':
+    return jinit_read_ppm(cinfo);
+#endif
+#ifdef RLE_SUPPORTED
+  case 'R':
+    return jinit_read_rle(cinfo);
+#endif
+#ifdef TARGA_SUPPORTED
+  case 0x00:
+    return jinit_read_targa(cinfo);
+#endif
+  default:
+    ERREXIT(cinfo, JERR_UNKNOWN_FORMAT);
+    break;
+  }
+
+  return NULL;			/* suppress compiler warnings */
+}
+
+
+/*
+ * Signal catcher to ensure that temporary files are removed before aborting.
+ * NB: for Amiga Manx C this is actually a global routine named _abort();
+ * we put "#define signal_catcher _abort" in jconfig.h.  Talk about bogus...
+ */
+
+#ifdef NEED_SIGNAL_CATCHER
+
+static j_common_ptr sig_cinfo;
+
+GLOBAL void
+signal_catcher (int signum)
+{
+  if (sig_cinfo != NULL) {
+    if (sig_cinfo->err != NULL) /* turn off trace output */
+      sig_cinfo->err->trace_level = 0;
+    jpeg_destroy(sig_cinfo);	/* clean up memory allocation & temp files */
+  }
+  exit(EXIT_FAILURE);
+}
+
+#endif
+
+
+/*
+ * Optional routine to display a percent-done figure on stderr.
+ */
+
+#ifdef PROGRESS_REPORT
+
+METHODDEF void
+progress_monitor (j_common_ptr cinfo)
+{
+  cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress;
+  int total_passes = prog->pub.total_passes + prog->total_extra_passes;
+  int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit);
+
+  if (percent_done != prog->percent_done) {
+    prog->percent_done = percent_done;
+    if (total_passes > 1) {
+      fprintf(stderr, "\rPass %d/%d: %3d%% ",
+	      prog->pub.completed_passes + prog->completed_extra_passes + 1,
+	      total_passes, percent_done);
+    } else {
+      fprintf(stderr, "\r %3d%% ", percent_done);
+    }
+    fflush(stderr);
+  }
+}
+
+#endif
+
+
+/*
+ * Argument-parsing code.
+ * The switch parser is designed to be useful with DOS-style command line
+ * syntax, ie, intermixed switches and file names, where only the switches
+ * to the left of a given file name affect processing of that file.
+ * The main program in this file doesn't actually use this capability...
+ */
+
+
+static const char * progname;	/* program name for error messages */
+static char * outfilename;	/* for -outfile switch */
+
+
+LOCAL void
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "usage: %s [switches] ", progname);
+#ifdef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "inputfile outputfile\n");
+#else
+  fprintf(stderr, "[inputfile]\n");
+#endif
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -quality N     Compression quality (0..100; 5-95 is useful range)\n");
+  fprintf(stderr, "  -grayscale     Create monochrome JPEG file\n");
+#ifdef ENTROPY_OPT_SUPPORTED
+  fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
+#endif
+#ifdef TARGA_SUPPORTED
+  fprintf(stderr, "  -targa         Input file is Targa format (usually not needed)\n");
+#endif
+  fprintf(stderr, "Switches for advanced users:\n");
+#ifdef DCT_ISLOW_SUPPORTED
+  fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  fprintf(stderr, "  -dct fast      Use fast integer DCT (less accurate)%s\n",
+	  (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
+#endif
+  fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
+#ifdef INPUT_SMOOTHING_SUPPORTED
+  fprintf(stderr, "  -smooth N      Smooth dithered input (N=1..100 is strength)\n");
+#endif
+  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
+  fprintf(stderr, "  -outfile name  Specify name for output file\n");
+  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
+  fprintf(stderr, "Switches for wizards:\n");
+#ifdef C_ARITH_CODING_SUPPORTED
+  fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
+#endif
+  fprintf(stderr, "  -baseline      Force baseline output\n");
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+  fprintf(stderr, "  -nointerleave  Create noninterleaved JPEG file\n");
+#endif
+  fprintf(stderr, "  -qtables file  Use quantization tables given in file\n");
+  fprintf(stderr, "  -qslots N[,...]    Set component quantization tables\n");
+  fprintf(stderr, "  -sample HxV[,...]  Set component sampling factors\n");
+  exit(EXIT_FAILURE);
+}
+
+
+LOCAL boolean
+keymatch (char * arg, const char * keyword, int minchars)
+/* Case-insensitive matching of (possibly abbreviated) keyword switches. */
+/* keyword is the constant keyword (must be lower case already), */
+/* minchars is length of minimum legal abbreviation. */
+{
+  register int ca, ck;
+  register int nmatched = 0;
+
+  while ((ca = *arg++) != '\0') {
+    if ((ck = *keyword++) == '\0')
+      return FALSE;		/* arg longer than keyword, no good */
+    if (isupper(ca))		/* force arg to lcase (assume ck is already) */
+      ca = tolower(ca);
+    if (ca != ck)
+      return FALSE;		/* no good */
+    nmatched++;			/* count matched characters */
+  }
+  /* reached end of argument; fail if it's too short for unique abbrev */
+  if (nmatched < minchars)
+    return FALSE;
+  return TRUE;			/* A-OK */
+}
+
+
+LOCAL int
+qt_getc (FILE * file)
+/* Read next char, skipping over any comments (# to end of line) */
+/* A comment/newline sequence is returned as a newline */
+{
+  register int ch;
+  
+  ch = getc(file);
+  if (ch == '#') {
+    do {
+      ch = getc(file);
+    } while (ch != '\n' && ch != EOF);
+  }
+  return ch;
+}
+
+
+LOCAL long
+read_qt_integer (FILE * file)
+/* Read an unsigned decimal integer from a quantization-table file */
+/* Swallows one trailing character after the integer */
+{
+  register int ch;
+  register long val;
+  
+  /* Skip any leading whitespace, detect EOF */
+  do {
+    ch = qt_getc(file);
+    if (ch == EOF)
+      return EOF;
+  } while (isspace(ch));
+  
+  if (! isdigit(ch)) {
+    fprintf(stderr, "%s: bogus data in quantization file\n", progname);
+    exit(EXIT_FAILURE);
+  }
+
+  val = ch - '0';
+  while (ch = qt_getc(file), isdigit(ch)) {
+    val *= 10;
+    val += ch - '0';
+  }
+  return val;
+}
+
+
+LOCAL void
+read_quant_tables (j_compress_ptr cinfo, char * filename, int scale_factor,
+		   boolean force_baseline)
+/* Read a set of quantization tables from the specified file.
+ * The file is plain ASCII text: decimal numbers with whitespace between.
+ * Comments preceded by '#' may be included in the file.
+ * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values.
+ * The tables are implicitly numbered 0,1,etc.
+ * NOTE: does not affect the qslots mapping, which will default to selecting
+ * table 0 for luminance (or primary) components, 1 for chrominance components.
+ * You must use -qslots if you want a different component->table mapping.
+ */
+{
+  /* ZIG[i] is the zigzag-order position of the i'th element of a DCT block */
+  /* read in natural order (left to right, top to bottom). */
+  static const int ZIG[DCTSIZE2] = {
+     0,  1,  5,  6, 14, 15, 27, 28,
+     2,  4,  7, 13, 16, 26, 29, 42,
+     3,  8, 12, 17, 25, 30, 41, 43,
+     9, 11, 18, 24, 31, 40, 44, 53,
+    10, 19, 23, 32, 39, 45, 52, 54,
+    20, 22, 33, 38, 46, 51, 55, 60,
+    21, 34, 37, 47, 50, 56, 59, 61,
+    35, 36, 48, 49, 57, 58, 62, 63
+    };
+  FILE * fp;
+  int tblno, i;
+  long val;
+  unsigned int table[DCTSIZE2];
+
+  if ((fp = fopen(filename, "r")) == NULL) {
+    fprintf(stderr, "%s: can't open %s\n", progname, filename);
+    exit(EXIT_FAILURE);
+  }
+  tblno = 0;
+
+  while ((val = read_qt_integer(fp)) != EOF) { /* read 1st element of table */
+    if (tblno >= NUM_QUANT_TBLS) {
+      fprintf(stderr, "%s: too many tables in file %s\n", progname, filename);
+      exit(EXIT_FAILURE);
+    }
+    table[0] = (unsigned int) val;
+    for (i = 1; i < DCTSIZE2; i++) {
+      if ((val = read_qt_integer(fp)) == EOF) {
+	fprintf(stderr, "%s: incomplete table in file %s\n", progname, filename);
+	exit(EXIT_FAILURE);
+      }
+      table[ZIG[i]] = (unsigned int) val;
+    }
+    jpeg_add_quant_table(cinfo, tblno, table, scale_factor, force_baseline);
+    tblno++;
+  }
+
+  fclose(fp);
+}
+
+
+LOCAL void
+set_quant_slots (j_compress_ptr cinfo, char *arg)
+/* Process a quantization-table-selectors parameter string, of the form
+ *     N[,N,...]
+ * If there are more components than parameters, the last value is replicated.
+ */
+{
+  int val = 0;			/* default table # */
+  int ci;
+  char ch;
+
+  for (ci = 0; ci < MAX_COMPONENTS; ci++) {
+    if (*arg) {
+      ch = ',';			/* if not set by sscanf, will be ',' */
+      if (sscanf(arg, "%d%c", &val, &ch) < 1)
+	usage();
+      if (ch != ',')
+	usage();		/* syntax check */
+      if (val < 0 || val >= NUM_QUANT_TBLS) {
+	fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n",
+		NUM_QUANT_TBLS-1);
+	exit(EXIT_FAILURE);
+      }
+      cinfo->comp_info[ci].quant_tbl_no = val;
+      while (*arg && *arg++ != ',') /* advance to next segment of arg string */
+	;
+    } else {
+      /* reached end of parameter, set remaining components to last table */
+      cinfo->comp_info[ci].quant_tbl_no = val;
+    }
+  }
+}
+
+
+LOCAL void
+set_sample_factors (j_compress_ptr cinfo, char *arg)
+/* Process a sample-factors parameter string, of the form
+ *     HxV[,HxV,...]
+ * If there are more components than parameters, "1x1" is assumed.
+ */
+{
+  int ci, val1, val2;
+  char ch1, ch2;
+
+  for (ci = 0; ci < MAX_COMPONENTS; ci++) {
+    if (*arg) {
+      ch2 = ',';		/* if not set by sscanf, will be ',' */
+      if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3)
+	usage();
+      if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',')
+	usage();		/* syntax check */
+      if (val1 <= 0 || val1 > 4 || val2 <= 0 || val2 > 4) {
+	fprintf(stderr, "JPEG sampling factors must be 1..4\n");
+	exit(EXIT_FAILURE);
+      }
+      cinfo->comp_info[ci].h_samp_factor = val1;
+      cinfo->comp_info[ci].v_samp_factor = val2;
+      while (*arg && *arg++ != ',') /* advance to next segment of arg string */
+	;
+    } else {
+      /* reached end of parameter, set remaining components to 1x1 sampling */
+      cinfo->comp_info[ci].h_samp_factor = 1;
+      cinfo->comp_info[ci].v_samp_factor = 1;
+    }
+  }
+}
+
+
+LOCAL int
+parse_switches (j_compress_ptr cinfo, int argc, char **argv,
+		int last_file_arg_seen, boolean for_real)
+/* Parse optional switches.
+ * Returns argv[] index of first file-name argument (== argc if none).
+ * Any file names with indexes <= last_file_arg_seen are ignored;
+ * they have presumably been processed in a previous iteration.
+ * (Pass 0 for last_file_arg_seen on the first or only iteration.)
+ * for_real is FALSE on the first (dummy) pass; we may skip any expensive
+ * processing.
+ */
+{
+  int argn;
+  char * arg;
+  int quality;			/* -quality parameter */
+  int q_scale_factor;		/* scaling percentage for -qtables */
+  boolean force_baseline;
+  char * qtablefile = NULL;	/* saves -qtables filename if any */
+  char * qslotsarg = NULL;	/* saves -qslots parm if any */
+  char * samplearg = NULL;	/* saves -sample parm if any */
+
+  /* Set up default JPEG parameters. */
+  /* Note that default -quality level need not, and does not,
+   * match the default scaling for an explicit -qtables argument.
+   */
+  quality = 75;			/* default -quality value */
+  q_scale_factor = 100;		/* default to no scaling for -qtables */
+  force_baseline = FALSE;	/* by default, allow 16-bit quantizers */
+  is_targa = FALSE;
+  outfilename = NULL;
+  cinfo->err->trace_level = 0;
+
+  /* Scan command line options, adjust parameters */
+
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (*arg != '-') {
+      /* Not a switch, must be a file name argument */
+      if (argn <= last_file_arg_seen) {
+	outfilename = NULL;	/* -outfile applies to just one input file */
+	continue;		/* ignore this name if previously processed */
+      }
+      break;			/* else done parsing switches */
+    }
+    arg++;			/* advance past switch marker character */
+
+    if (keymatch(arg, "arithmetic", 1)) {
+      /* Use arithmetic coding. */
+#ifdef C_ARITH_CODING_SUPPORTED
+      cinfo->arith_code = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "baseline", 1)) {
+      /* Force baseline output (8-bit quantizer values). */
+      force_baseline = TRUE;
+
+    } else if (keymatch(arg, "dct", 2)) {
+      /* Select DCT algorithm. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "int", 1)) {
+	cinfo->dct_method = JDCT_ISLOW;
+      } else if (keymatch(argv[argn], "fast", 2)) {
+	cinfo->dct_method = JDCT_IFAST;
+      } else if (keymatch(argv[argn], "float", 2)) {
+	cinfo->dct_method = JDCT_FLOAT;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
+      /* Enable debug printouts. */
+      /* On first -d, print version identification */
+      static boolean printed_version = FALSE;
+
+      if (! printed_version) {
+	fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n",
+		JVERSION, JCOPYRIGHT);
+	printed_version = TRUE;
+      }
+      cinfo->err->trace_level++;
+
+    } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
+      /* Force a monochrome JPEG file to be generated. */
+      jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
+
+    } else if (keymatch(arg, "maxmemory", 3)) {
+      /* Maximum memory in Kb (or Mb with 'm'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (ch == 'm' || ch == 'M')
+	lval *= 1000L;
+      cinfo->mem->max_memory_to_use = lval * 1000L;
+
+    } else if (keymatch(arg, "nointerleave", 3)) {
+      /* Create noninterleaved file. */
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+      cinfo->interleave = FALSE;
+#else
+      fprintf(stderr, "%s: sorry, multiple-scan support was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
+      /* Enable entropy parm optimization. */
+#ifdef ENTROPY_OPT_SUPPORTED
+      cinfo->optimize_coding = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "outfile", 4)) {
+      /* Set output file name. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      outfilename = argv[argn];	/* save it away for later use */
+
+    } else if (keymatch(arg, "quality", 1)) {
+      /* Quality factor (quantization table scaling factor). */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &quality) != 1)
+	usage();
+      /* Change scale factor in case -qtables is present. */
+      q_scale_factor = jpeg_quality_scaling(quality);
+
+    } else if (keymatch(arg, "qslots", 2)) {
+      /* Quantization table slot numbers. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      qslotsarg = argv[argn];
+      /* Must delay setting qslots until after we have processed any
+       * colorspace-determining switches, since jpeg_set_colorspace sets
+       * default quant table numbers.
+       */
+
+    } else if (keymatch(arg, "qtables", 2)) {
+      /* Quantization tables fetched from file. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      qtablefile = argv[argn];
+      /* We postpone actually reading the file in case -quality comes later. */
+
+    } else if (keymatch(arg, "restart", 1)) {
+      /* Restart interval in MCU rows (or in MCUs with 'b'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (lval < 0 || lval > 65535L)
+	usage();
+      if (ch == 'b' || ch == 'B') {
+	cinfo->restart_interval = (unsigned int) lval;
+	cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
+      } else {
+	cinfo->restart_in_rows = (int) lval;
+	/* restart_interval will be computed during startup */
+      }
+
+    } else if (keymatch(arg, "sample", 2)) {
+      /* Set sampling factors. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      samplearg = argv[argn];
+      /* Must delay setting sample factors until after we have processed any
+       * colorspace-determining switches, since jpeg_set_colorspace sets
+       * default sampling factors.
+       */
+
+    } else if (keymatch(arg, "smooth", 2)) {
+      /* Set input smoothing factor. */
+      int val;
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &val) != 1)
+	usage();
+      if (val < 0 || val > 100)
+	usage();
+      cinfo->smoothing_factor = val;
+
+    } else if (keymatch(arg, "targa", 1)) {
+      /* Input file is Targa format. */
+      is_targa = TRUE;
+
+    } else {
+      usage();			/* bogus switch */
+    }
+  }
+
+  /* Post-switch-scanning cleanup */
+
+  if (for_real) {
+
+    /* Set quantization tables for selected quality. */
+    /* Some or all may be overridden if -qtables is present. */
+    jpeg_set_quality(cinfo, quality, force_baseline);
+
+    if (qtablefile != NULL)	/* process -qtables if it was present */
+      read_quant_tables(cinfo, qtablefile, q_scale_factor, force_baseline);
+
+    if (qslotsarg != NULL)	/* process -qslots if it was present */
+      set_quant_slots(cinfo, qslotsarg);
+
+    if (samplearg != NULL)	/* process -sample if it was present */
+      set_sample_factors(cinfo, samplearg);
+
+  }
+
+  return argn;			/* return index of next arg (file name) */
+}
+
+
+/*
+ * The main program.
+ */
+
+GLOBAL int
+main (int argc, char **argv)
+{
+  struct jpeg_compress_struct cinfo;
+  struct jpeg_error_mgr jerr;
+#ifdef PROGRESS_REPORT
+  struct cdjpeg_progress_mgr progress;
+#endif
+  int file_index;
+  cjpeg_source_ptr src_mgr;
+  FILE * input_file;
+  FILE * output_file;
+  JDIMENSION num_scanlines;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "cjpeg";		/* in case C library doesn't provide it */
+
+  /* Initialize the JPEG compression object with default error handling. */
+  cinfo.err = jpeg_std_error(&jerr);
+  jpeg_create_compress(&cinfo);
+  /* Add some application-specific error messages (from cderror.h) */
+  jerr.addon_message_table = addon_message_table;
+  jerr.first_addon_message = JMSG_FIRSTADDONCODE;
+  jerr.last_addon_message = JMSG_LASTADDONCODE;
+
+  /* Now safe to enable signal catcher. */
+#ifdef NEED_SIGNAL_CATCHER
+  sig_cinfo = (j_common_ptr) &cinfo;
+  signal(SIGINT, signal_catcher);
+#ifdef SIGTERM			/* not all systems have SIGTERM */
+  signal(SIGTERM, signal_catcher);
+#endif
+#endif
+
+  /* Initialize JPEG parameters.
+   * Much of this may be overridden later.
+   * In particular, we don't yet know the input file's color space,
+   * but we need to provide some value for jpeg_set_defaults() to work.
+   */
+
+  cinfo.in_color_space = JCS_RGB; /* arbitrary guess */
+  jpeg_set_defaults(&cinfo);
+
+  /* Scan command line to find file names.
+   * It is convenient to use just one switch-parsing routine, but the switch
+   * values read here are ignored; we will rescan the switches after opening
+   * the input file.
+   */
+
+  file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
+
+#ifdef TWO_FILE_COMMANDLINE
+  /* Must have either -outfile switch or explicit output file name */
+  if (outfilename == NULL) {
+    if (file_index != argc-2) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+    outfilename = argv[file_index+1];
+  } else {
+    if (file_index != argc-1) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+  }
+#else
+  /* Unix style: expect zero or one file name */
+  if (file_index < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+#endif /* TWO_FILE_COMMANDLINE */
+
+  /* Open the input file. */
+  if (file_index < argc) {
+    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+#ifdef USE_SETMODE		/* need to hack file mode? */
+    setmode(fileno(stdin), O_BINARY);
+#endif
+#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
+    if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open stdin\n", progname);
+      exit(EXIT_FAILURE);
+    }
+#else
+    input_file = stdin;
+#endif
+  }
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+#ifdef USE_SETMODE		/* need to hack file mode? */
+    setmode(fileno(stdout), O_BINARY);
+#endif
+#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
+    if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open stdout\n", progname);
+      exit(EXIT_FAILURE);
+    }
+#else
+    output_file = stdout;
+#endif
+  }
+
+#ifdef PROGRESS_REPORT
+  /* Enable progress display, unless trace output is on */
+  if (jerr.trace_level == 0) {
+    progress.pub.progress_monitor = progress_monitor;
+    progress.completed_extra_passes = 0;
+    progress.total_extra_passes = 0;
+    progress.percent_done = -1;
+    cinfo.progress = &progress.pub;
+  }
+#endif
+
+  /* Figure out the input file format, and set up to read it. */
+  src_mgr = select_file_type(&cinfo, input_file);
+  src_mgr->input_file = input_file;
+
+  /* Read the input file header to obtain file size & colorspace. */
+  (*src_mgr->start_input) (&cinfo, src_mgr);
+
+  /* Now that we know input colorspace, fix colorspace-dependent defaults */
+  jpeg_default_colorspace(&cinfo);
+
+  /* Adjust default compression parameters by re-parsing the options */
+  file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
+
+  /* Specify data destination for compression */
+  jpeg_stdio_dest(&cinfo, output_file);
+
+  /* Start compressor */
+  jpeg_start_compress(&cinfo, TRUE);
+
+  /* Process data */
+  while (cinfo.next_scanline < cinfo.image_height) {
+    num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr);
+    (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines);
+  }
+
+  /* Finish compression and release memory */
+  (*src_mgr->finish_input) (&cinfo, src_mgr);
+  jpeg_finish_compress(&cinfo);
+  jpeg_destroy_compress(&cinfo);
+
+#ifdef PROGRESS_REPORT
+  /* Clear away progress display */
+  if (jerr.trace_level == 0) {
+    fprintf(stderr, "\r                \r");
+    fflush(stderr);
+  }
+#endif
+
+  /* All done. */
+  exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}