Eliminate "main is usually a function" warnings
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.1.x@780 632fc199-4ca6-4c93-a231-07263d6284db
diff --git a/jcmainct.c b/jcmainct.c
index e0279a7..bd0051a 100644
--- a/jcmainct.c
+++ b/jcmainct.c
@@ -68,32 +68,32 @@
METHODDEF(void)
start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
{
- my_main_ptr main = (my_main_ptr) cinfo->main;
+ my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
/* Do nothing in raw-data mode. */
if (cinfo->raw_data_in)
return;
- main->cur_iMCU_row = 0; /* initialize counters */
- main->rowgroup_ctr = 0;
- main->suspended = FALSE;
- main->pass_mode = pass_mode; /* save mode for use by process_data */
+ main_ptr->cur_iMCU_row = 0; /* initialize counters */
+ main_ptr->rowgroup_ctr = 0;
+ main_ptr->suspended = FALSE;
+ main_ptr->pass_mode = pass_mode; /* save mode for use by process_data */
switch (pass_mode) {
case JBUF_PASS_THRU:
#ifdef FULL_MAIN_BUFFER_SUPPORTED
- if (main->whole_image[0] != NULL)
+ if (main_ptr->whole_image[0] != NULL)
ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
#endif
- main->pub.process_data = process_data_simple_main;
+ main_ptr->pub.process_data = process_data_simple_main;
break;
#ifdef FULL_MAIN_BUFFER_SUPPORTED
case JBUF_SAVE_SOURCE:
case JBUF_CRANK_DEST:
case JBUF_SAVE_AND_PASS:
- if (main->whole_image[0] == NULL)
+ if (main_ptr->whole_image[0] == NULL)
ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
- main->pub.process_data = process_data_buffer_main;
+ main_ptr->pub.process_data = process_data_buffer_main;
break;
#endif
default:
@@ -114,46 +114,46 @@
JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
JDIMENSION in_rows_avail)
{
- my_main_ptr main = (my_main_ptr) cinfo->main;
+ my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
- while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
+ while (main_ptr->cur_iMCU_row < cinfo->total_iMCU_rows) {
/* Read input data if we haven't filled the main buffer yet */
- if (main->rowgroup_ctr < DCTSIZE)
+ if (main_ptr->rowgroup_ctr < DCTSIZE)
(*cinfo->prep->pre_process_data) (cinfo,
input_buf, in_row_ctr, in_rows_avail,
- main->buffer, &main->rowgroup_ctr,
+ main_ptr->buffer, &main_ptr->rowgroup_ctr,
(JDIMENSION) DCTSIZE);
/* If we don't have a full iMCU row buffered, return to application for
* more data. Note that preprocessor will always pad to fill the iMCU row
* at the bottom of the image.
*/
- if (main->rowgroup_ctr != DCTSIZE)
+ if (main_ptr->rowgroup_ctr != DCTSIZE)
return;
/* Send the completed row to the compressor */
- if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
+ if (! (*cinfo->coef->compress_data) (cinfo, main_ptr->buffer)) {
/* If compressor did not consume the whole row, then we must need to
* suspend processing and return to the application. In this situation
* we pretend we didn't yet consume the last input row; otherwise, if
* it happened to be the last row of the image, the application would
* think we were done.
*/
- if (! main->suspended) {
+ if (! main_ptr->suspended) {
(*in_row_ctr)--;
- main->suspended = TRUE;
+ main_ptr->suspended = TRUE;
}
return;
}
/* We did finish the row. Undo our little suspension hack if a previous
* call suspended; then mark the main buffer empty.
*/
- if (main->suspended) {
+ if (main_ptr->suspended) {
(*in_row_ctr)++;
- main->suspended = FALSE;
+ main_ptr->suspended = FALSE;
}
- main->rowgroup_ctr = 0;
- main->cur_iMCU_row++;
+ main_ptr->rowgroup_ctr = 0;
+ main_ptr->cur_iMCU_row++;
}
}
@@ -173,22 +173,22 @@
my_main_ptr main = (my_main_ptr) cinfo->main;
int ci;
jpeg_component_info *compptr;
- boolean writing = (main->pass_mode != JBUF_CRANK_DEST);
+ boolean writing = (main_ptr->pass_mode != JBUF_CRANK_DEST);
- while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
+ while (main_ptr->cur_iMCU_row < cinfo->total_iMCU_rows) {
/* Realign the virtual buffers if at the start of an iMCU row. */
- if (main->rowgroup_ctr == 0) {
+ if (main_ptr->rowgroup_ctr == 0) {
for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
ci++, compptr++) {
- main->buffer[ci] = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, main->whole_image[ci],
- main->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE),
+ main_ptr->buffer[ci] = (*cinfo->mem->access_virt_sarray)
+ ((j_common_ptr) cinfo, main_ptr->whole_image[ci],
+ main_ptr->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE),
(JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing);
}
/* In a read pass, pretend we just read some source data. */
if (! writing) {
*in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE;
- main->rowgroup_ctr = DCTSIZE;
+ main_ptr->rowgroup_ctr = DCTSIZE;
}
}
@@ -197,40 +197,40 @@
if (writing) {
(*cinfo->prep->pre_process_data) (cinfo,
input_buf, in_row_ctr, in_rows_avail,
- main->buffer, &main->rowgroup_ctr,
+ main_ptr->buffer, &main_ptr->rowgroup_ctr,
(JDIMENSION) DCTSIZE);
/* Return to application if we need more data to fill the iMCU row. */
- if (main->rowgroup_ctr < DCTSIZE)
+ if (main_ptr->rowgroup_ctr < DCTSIZE)
return;
}
/* Emit data, unless this is a sink-only pass. */
- if (main->pass_mode != JBUF_SAVE_SOURCE) {
- if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
+ if (main_ptr->pass_mode != JBUF_SAVE_SOURCE) {
+ if (! (*cinfo->coef->compress_data) (cinfo, main_ptr->buffer)) {
/* If compressor did not consume the whole row, then we must need to
* suspend processing and return to the application. In this situation
* we pretend we didn't yet consume the last input row; otherwise, if
* it happened to be the last row of the image, the application would
* think we were done.
*/
- if (! main->suspended) {
+ if (! main_ptr->suspended) {
(*in_row_ctr)--;
- main->suspended = TRUE;
+ main_ptr->suspended = TRUE;
}
return;
}
/* We did finish the row. Undo our little suspension hack if a previous
* call suspended; then mark the main buffer empty.
*/
- if (main->suspended) {
+ if (main_ptr->suspended) {
(*in_row_ctr)++;
- main->suspended = FALSE;
+ main_ptr->suspended = FALSE;
}
}
/* If get here, we are done with this iMCU row. Mark buffer empty. */
- main->rowgroup_ctr = 0;
- main->cur_iMCU_row++;
+ main_ptr->rowgroup_ctr = 0;
+ main_ptr->cur_iMCU_row++;
}
}
@@ -244,15 +244,15 @@
GLOBAL(void)
jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer)
{
- my_main_ptr main;
+ my_main_ptr main_ptr;
int ci;
jpeg_component_info *compptr;
- main = (my_main_ptr)
+ main_ptr = (my_main_ptr)
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
SIZEOF(my_main_controller));
- cinfo->main = (struct jpeg_c_main_controller *) main;
- main->pub.start_pass = start_pass_main;
+ cinfo->main = (struct jpeg_c_main_controller *) main_ptr;
+ main_ptr->pub.start_pass = start_pass_main;
/* We don't need to create a buffer in raw-data mode. */
if (cinfo->raw_data_in)
@@ -267,7 +267,7 @@
/* Note we pad the bottom to a multiple of the iMCU height */
for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
ci++, compptr++) {
- main->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
+ main_ptr->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
compptr->width_in_blocks * DCTSIZE,
(JDIMENSION) jround_up((long) compptr->height_in_blocks,
@@ -279,12 +279,12 @@
#endif
} else {
#ifdef FULL_MAIN_BUFFER_SUPPORTED
- main->whole_image[0] = NULL; /* flag for no virtual arrays */
+ main_ptr->whole_image[0] = NULL; /* flag for no virtual arrays */
#endif
/* Allocate a strip buffer for each component */
for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
ci++, compptr++) {
- main->buffer[ci] = (*cinfo->mem->alloc_sarray)
+ main_ptr->buffer[ci] = (*cinfo->mem->alloc_sarray)
((j_common_ptr) cinfo, JPOOL_IMAGE,
compptr->width_in_blocks * DCTSIZE,
(JDIMENSION) (compptr->v_samp_factor * DCTSIZE));