blob: 253b8972fb5a1c288401c295c47baa56d21c6e34 [file] [log] [blame]
;
; jsimdext.inc - common declarations
;
; Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
; Copyright 2010 D. R. Commander
;
; Based on
; x86 SIMD extension for IJG JPEG library - version 1.02
;
; Copyright (C) 1999-2006, MIYASAKA Masaru.
;
; This software is provided 'as-is', without any express or implied
; warranty. In no event will the authors be held liable for any damages
; arising from the use of this software.
;
; Permission is granted to anyone to use this software for any purpose,
; including commercial applications, and to alter it and redistribute it
; freely, subject to the following restrictions:
;
; 1. The origin of this software must not be misrepresented; you must not
; claim that you wrote the original software. If you use this software
; in a product, an acknowledgment in the product documentation would be
; appreciated but is not required.
; 2. Altered source versions must be plainly marked as such, and must not be
; misrepresented as being the original software.
; 3. This notice may not be removed or altered from any source distribution.
;
; [TAB8]
; ==========================================================================
; System-dependent configurations
%ifdef WIN32 ; ----(nasm -fwin32 -DWIN32 ...)--------
; * Microsoft Visual C++
; * MinGW (Minimalist GNU for Windows)
; * CygWin
; * LCC-Win32
; -- segment definition --
;
%ifdef __YASM_VER__
%define SEG_TEXT .text align=16
%define SEG_CONST .rdata align=16
%else
%define SEG_TEXT .text align=16 public use32 class=CODE
%define SEG_CONST .rdata align=16 public use32 class=CONST
%endif
%elifdef WIN64 ; ----(nasm -fwin64 -DWIN64 ...)--------
; * Microsoft Visual C++
; -- segment definition --
;
%ifdef __YASM_VER__
%define SEG_TEXT .text align=16
%define SEG_CONST .rdata align=16
%else
%define SEG_TEXT .text align=16 public use64 class=CODE
%define SEG_CONST .rdata align=16 public use64 class=CONST
%endif
%define EXTN(name) name ; foo() -> foo
%elifdef OBJ32 ; ----(nasm -fobj -DOBJ32 ...)----------
; * Borland C++ (Win32)
; -- segment definition --
;
%define SEG_TEXT .text align=16 public use32 class=CODE
%define SEG_CONST .data align=16 public use32 class=DATA
%elifdef ELF ; ----(nasm -felf[64] -DELF ...)------------
; * Linux
; * *BSD family Unix using elf format
; * Unix System V, including Solaris x86, UnixWare and SCO Unix
; mark stack as non-executable
section .note.GNU-stack noalloc noexec nowrite progbits
; -- segment definition --
;
%ifdef __x86_64__
%define SEG_TEXT .text progbits align=16
%define SEG_CONST .rodata progbits align=16
%else
%define SEG_TEXT .text progbits alloc exec nowrite align=16
%define SEG_CONST .rodata progbits alloc noexec nowrite align=16
%endif
; To make the code position-independent, append -DPIC to the commandline
;
%define GOT_SYMBOL _GLOBAL_OFFSET_TABLE_ ; ELF supports PIC
%define EXTN(name) name ; foo() -> foo
%elifdef AOUT ; ----(nasm -faoutb/aout -DAOUT ...)----
; * Older Linux using a.out format (nasm -f aout -DAOUT ...)
; * *BSD family Unix using a.out format (nasm -f aoutb -DAOUT ...)
; -- segment definition --
;
%define SEG_TEXT .text
%define SEG_CONST .data
; To make the code position-independent, append -DPIC to the commandline
;
%define GOT_SYMBOL __GLOBAL_OFFSET_TABLE_ ; BSD-style a.out supports PIC
%elifdef MACHO ; ----(nasm -fmacho -DMACHO ...)--------
; * NeXTstep/OpenStep/Rhapsody/Darwin/MacOS X (Mach-O format)
; -- segment definition --
;
%define SEG_TEXT .text ;align=16 ; nasm doesn't accept align=16. why?
%define SEG_CONST .rodata align=16
; The generation of position-independent code (PIC) is the default on Darwin.
;
%define PIC
%define GOT_SYMBOL _MACHO_PIC_ ; Mach-O style code-relative addressing
%else ; ----(Other case)----------------------
; -- segment definition --
;
%define SEG_TEXT .text
%define SEG_CONST .data
%endif ; ----------------------------------------------
; ==========================================================================
; --------------------------------------------------------------------------
; Common types
;
%ifdef __x86_64__
%define POINTER qword ; general pointer type
%define SIZEOF_POINTER SIZEOF_QWORD ; sizeof(POINTER)
%define POINTER_BIT QWORD_BIT ; sizeof(POINTER)*BYTE_BIT
%else
%define POINTER dword ; general pointer type
%define SIZEOF_POINTER SIZEOF_DWORD ; sizeof(POINTER)
%define POINTER_BIT DWORD_BIT ; sizeof(POINTER)*BYTE_BIT
%endif
%define INT dword ; signed integer type
%define SIZEOF_INT SIZEOF_DWORD ; sizeof(INT)
%define INT_BIT DWORD_BIT ; sizeof(INT)*BYTE_BIT
%define FP32 dword ; IEEE754 single
%define SIZEOF_FP32 SIZEOF_DWORD ; sizeof(FP32)
%define FP32_BIT DWORD_BIT ; sizeof(FP32)*BYTE_BIT
%define MMWORD qword ; int64 (MMX register)
%define SIZEOF_MMWORD SIZEOF_QWORD ; sizeof(MMWORD)
%define MMWORD_BIT QWORD_BIT ; sizeof(MMWORD)*BYTE_BIT
; NASM is buggy and doesn't properly handle operand sizes for SSE
; instructions, so for now we have to define XMMWORD as blank.
%define XMMWORD ; int128 (SSE register)
%define SIZEOF_XMMWORD SIZEOF_OWORD ; sizeof(XMMWORD)
%define XMMWORD_BIT OWORD_BIT ; sizeof(XMMWORD)*BYTE_BIT
; Similar hacks for when we load a dword or MMWORD into an xmm# register
%define XMM_DWORD
%define XMM_MMWORD
%define SIZEOF_BYTE 1 ; sizeof(BYTE)
%define SIZEOF_WORD 2 ; sizeof(WORD)
%define SIZEOF_DWORD 4 ; sizeof(DWORD)
%define SIZEOF_QWORD 8 ; sizeof(QWORD)
%define SIZEOF_OWORD 16 ; sizeof(OWORD)
%define BYTE_BIT 8 ; CHAR_BIT in C
%define WORD_BIT 16 ; sizeof(WORD)*BYTE_BIT
%define DWORD_BIT 32 ; sizeof(DWORD)*BYTE_BIT
%define QWORD_BIT 64 ; sizeof(QWORD)*BYTE_BIT
%define OWORD_BIT 128 ; sizeof(OWORD)*BYTE_BIT
; --------------------------------------------------------------------------
; External Symbol Name
;
%ifndef EXTN
%define EXTN(name) _ %+ name ; foo() -> _foo
%endif
; --------------------------------------------------------------------------
; Macros for position-independent code (PIC) support
;
%ifndef GOT_SYMBOL
%undef PIC
%endif
%ifdef PIC ; -------------------------------------------
%ifidn GOT_SYMBOL,_MACHO_PIC_ ; --------------------
; At present, nasm doesn't seem to support PIC generation for Mach-O.
; The PIC support code below is a little tricky.
SECTION SEG_CONST
const_base:
%define GOTOFF(got,sym) (got) + (sym) - const_base
%imacro get_GOT 1
; NOTE: this macro destroys ecx resister.
call %%geteip
add ecx, byte (%%ref - $)
jmp short %%adjust
%%geteip:
mov ecx, POINTER [esp]
ret
%%adjust:
push ebp
xor ebp,ebp ; ebp = 0
%ifidni %1,ebx ; (%1 == ebx)
; db 0x8D,0x9C + jmp near const_base =
; lea ebx, [ecx+ebp*8+(const_base-%%ref)] ; 8D,9C,E9,(offset32)
db 0x8D,0x9C ; 8D,9C
jmp near const_base ; E9,(const_base-%%ref)
%%ref:
%else ; (%1 != ebx)
; db 0x8D,0x8C + jmp near const_base =
; lea ecx, [ecx+ebp*8+(const_base-%%ref)] ; 8D,8C,E9,(offset32)
db 0x8D,0x8C ; 8D,8C
jmp near const_base ; E9,(const_base-%%ref)
%%ref: mov %1, ecx
%endif ; (%1 == ebx)
pop ebp
%endmacro
%else ; GOT_SYMBOL != _MACHO_PIC_ ----------------
%define GOTOFF(got,sym) (got) + (sym) wrt ..gotoff
%imacro get_GOT 1
extern GOT_SYMBOL
call %%geteip
add %1, GOT_SYMBOL + $$ - $ wrt ..gotpc
jmp short %%done
%%geteip:
mov %1, POINTER [esp]
ret
%%done:
%endmacro
%endif ; GOT_SYMBOL == _MACHO_PIC_ ----------------
%imacro pushpic 1.nolist
push %1
%endmacro
%imacro poppic 1.nolist
pop %1
%endmacro
%imacro movpic 2.nolist
mov %1,%2
%endmacro
%else ; !PIC -----------------------------------------
%define GOTOFF(got,sym) (sym)
%imacro get_GOT 1.nolist
%endmacro
%imacro pushpic 1.nolist
%endmacro
%imacro poppic 1.nolist
%endmacro
%imacro movpic 2.nolist
%endmacro
%endif ; PIC -----------------------------------------
; --------------------------------------------------------------------------
; Align the next instruction on {2,4,8,16,..}-byte boundary.
; ".balign n,,m" in GNU as
;
%define MSKLE(x,y) (~(((y) & 0xFFFF) - ((x) & 0xFFFF)) >> 16)
%define FILLB(b,n) (($$-(b)) & ((n)-1))
%imacro alignx 1-2.nolist 0xFFFF
%%bs: times MSKLE(FILLB(%%bs,%1),%2) & MSKLE(16,FILLB($,%1)) & FILLB($,%1) \
db 0x90 ; nop
times MSKLE(FILLB(%%bs,%1),%2) & FILLB($,%1)/9 \
db 0x8D,0x9C,0x23,0x00,0x00,0x00,0x00 ; lea ebx,[ebx+0x00000000]
times MSKLE(FILLB(%%bs,%1),%2) & FILLB($,%1)/7 \
db 0x8D,0xAC,0x25,0x00,0x00,0x00,0x00 ; lea ebp,[ebp+0x00000000]
times MSKLE(FILLB(%%bs,%1),%2) & FILLB($,%1)/6 \
db 0x8D,0xAD,0x00,0x00,0x00,0x00 ; lea ebp,[ebp+0x00000000]
times MSKLE(FILLB(%%bs,%1),%2) & FILLB($,%1)/4 \
db 0x8D,0x6C,0x25,0x00 ; lea ebp,[ebp+0x00]
times MSKLE(FILLB(%%bs,%1),%2) & FILLB($,%1)/3 \
db 0x8D,0x6D,0x00 ; lea ebp,[ebp+0x00]
times MSKLE(FILLB(%%bs,%1),%2) & FILLB($,%1)/2 \
db 0x8B,0xED ; mov ebp,ebp
times MSKLE(FILLB(%%bs,%1),%2) & FILLB($,%1)/1 \
db 0x90 ; nop
%endmacro
; Align the next data on {2,4,8,16,..}-byte boundary.
;
%imacro alignz 1.nolist
align %1, db 0 ; filling zeros
%endmacro
%ifdef __x86_64__
%ifdef WIN64
%imacro collect_args 0
push r12
push r13
push r14
push r15
mov r10, rcx
mov r11, rdx
mov r12, r8
mov r13, r9
mov r14, [rax+48]
mov r15, [rax+56]
push rsi
push rdi
sub rsp, SIZEOF_XMMWORD
movaps XMMWORD [rsp], xmm6
sub rsp, SIZEOF_XMMWORD
movaps XMMWORD [rsp], xmm7
%endmacro
%imacro uncollect_args 0
movaps xmm7, XMMWORD [rsp]
add rsp, SIZEOF_XMMWORD
movaps xmm6, XMMWORD [rsp]
add rsp, SIZEOF_XMMWORD
pop rdi
pop rsi
pop r15
pop r14
pop r13
pop r12
%endmacro
%else
%imacro collect_args 0
push r10
push r11
push r12
push r13
push r14
push r15
mov r10, rdi
mov r11, rsi
mov r12, rdx
mov r13, rcx
mov r14, r8
mov r15, r9
%endmacro
%imacro uncollect_args 0
pop r15
pop r14
pop r13
pop r12
pop r11
pop r10
%endmacro
%endif
%endif
; --------------------------------------------------------------------------
; Defines picked up from the C headers
;
%include "jsimdcfg.inc"
; --------------------------------------------------------------------------