blob: cfbaca40f1b42d54ee55d6ea9776f1c435bd0f94 [file] [log] [blame]
Thomas G. Lane5ead57a1998-03-27 00:00:00 +00001/*
2 * transupp.h
3 *
Guido Vollbeding5829cb22012-01-15 00:00:00 +00004 * Copyright (C) 1997-2011, Thomas G. Lane, Guido Vollbeding.
Thomas G. Lane5ead57a1998-03-27 00:00:00 +00005 * This file is part of the Independent JPEG Group's software.
6 * For conditions of distribution and use, see the accompanying README file.
7 *
8 * This file contains declarations for image transformation routines and
9 * other utility code used by the jpegtran sample application. These are
10 * NOT part of the core JPEG library. But we keep these routines separate
11 * from jpegtran.c to ease the task of maintaining jpegtran-like programs
12 * that have other user interfaces.
13 *
14 * NOTE: all the routines declared here have very specific requirements
15 * about when they are to be executed during the reading and writing of the
16 * source and destination files. See the comments in transupp.c, or see
17 * jpegtran.c for an example of correct usage.
18 */
19
20/* If you happen not to want the image transform support, disable it here */
21#ifndef TRANSFORMS_SUPPORTED
22#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */
23#endif
24
Thomas G. Lane5ead57a1998-03-27 00:00:00 +000025/*
26 * Although rotating and flipping data expressed as DCT coefficients is not
27 * hard, there is an asymmetry in the JPEG format specification for images
28 * whose dimensions aren't multiples of the iMCU size. The right and bottom
29 * image edges are padded out to the next iMCU boundary with junk data; but
30 * no padding is possible at the top and left edges. If we were to flip
31 * the whole image including the pad data, then pad garbage would become
32 * visible at the top and/or left, and real pixels would disappear into the
33 * pad margins --- perhaps permanently, since encoders & decoders may not
34 * bother to preserve DCT blocks that appear to be completely outside the
35 * nominal image area. So, we have to exclude any partial iMCUs from the
36 * basic transformation.
37 *
38 * Transpose is the only transformation that can handle partial iMCUs at the
39 * right and bottom edges completely cleanly. flip_h can flip partial iMCUs
40 * at the bottom, but leaves any partial iMCUs at the right edge untouched.
41 * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched.
42 * The other transforms are defined as combinations of these basic transforms
43 * and process edge blocks in a way that preserves the equivalence.
44 *
45 * The "trim" option causes untransformable partial iMCUs to be dropped;
46 * this is not strictly lossless, but it usually gives the best-looking
47 * result for odd-size images. Note that when this option is active,
48 * the expected mathematical equivalences between the transforms may not hold.
49 * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim
50 * followed by -rot 180 -trim trims both edges.)
51 *
Guido Vollbeding5996a252009-06-27 00:00:00 +000052 * We also offer a lossless-crop option, which discards data outside a given
53 * image region but losslessly preserves what is inside. Like the rotate and
54 * flip transforms, lossless crop is restricted by the JPEG format: the upper
55 * left corner of the selected region must fall on an iMCU boundary. If this
56 * does not hold for the given crop parameters, we silently move the upper left
57 * corner up and/or left to make it so, simultaneously increasing the region
58 * dimensions to keep the lower right crop corner unchanged. (Thus, the
59 * output image covers at least the requested region, but may cover more.)
Guido Vollbeding5829cb22012-01-15 00:00:00 +000060 * The adjustment of the region dimensions may be optionally disabled.
Guido Vollbeding5996a252009-06-27 00:00:00 +000061 *
Guido Vollbeding989630f2010-01-10 00:00:00 +000062 * We also provide a lossless-resize option, which is kind of a lossless-crop
63 * operation in the DCT coefficient block domain - it discards higher-order
64 * coefficients and losslessly preserves lower-order coefficients of a
65 * sub-block.
66 *
67 * Rotate/flip transform, resize, and crop can be requested together in a
68 * single invocation. The crop is applied last --- that is, the crop region
69 * is specified in terms of the destination image after transform/resize.
Guido Vollbeding5996a252009-06-27 00:00:00 +000070 *
Thomas G. Lane5ead57a1998-03-27 00:00:00 +000071 * We also offer a "force to grayscale" option, which simply discards the
72 * chrominance channels of a YCbCr image. This is lossless in the sense that
73 * the luminance channel is preserved exactly. It's not the same kind of
74 * thing as the rotate/flip transformations, but it's convenient to handle it
75 * as part of this package, mainly because the transformation routines have to
76 * be aware of the option to know how many components to work on.
77 */
78
Guido Vollbeding5996a252009-06-27 00:00:00 +000079
80/* Short forms of external names for systems with brain-damaged linkers. */
81
82#ifdef NEED_SHORT_EXTERNAL_NAMES
83#define jtransform_parse_crop_spec jTrParCrop
84#define jtransform_request_workspace jTrRequest
85#define jtransform_adjust_parameters jTrAdjust
86#define jtransform_execute_transform jTrExec
87#define jtransform_perfect_transform jTrPerfect
88#define jcopy_markers_setup jCMrkSetup
89#define jcopy_markers_execute jCMrkExec
90#endif /* NEED_SHORT_EXTERNAL_NAMES */
91
92
93/*
94 * Codes for supported types of image transformations.
95 */
96
97typedef enum {
98 JXFORM_NONE, /* no transformation */
99 JXFORM_FLIP_H, /* horizontal flip */
100 JXFORM_FLIP_V, /* vertical flip */
101 JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */
102 JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */
103 JXFORM_ROT_90, /* 90-degree clockwise rotation */
104 JXFORM_ROT_180, /* 180-degree rotation */
105 JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */
106} JXFORM_CODE;
107
108/*
109 * Codes for crop parameters, which can individually be unspecified,
Guido Vollbeding5829cb22012-01-15 00:00:00 +0000110 * positive or negative for xoffset or yoffset,
111 * positive or forced for width or height.
Guido Vollbeding5996a252009-06-27 00:00:00 +0000112 */
113
114typedef enum {
Guido Vollbeding5829cb22012-01-15 00:00:00 +0000115 JCROP_UNSET,
116 JCROP_POS,
117 JCROP_NEG,
118 JCROP_FORCE
Guido Vollbeding5996a252009-06-27 00:00:00 +0000119} JCROP_CODE;
120
121/*
122 * Transform parameters struct.
123 * NB: application must not change any elements of this struct after
124 * calling jtransform_request_workspace.
125 */
126
Thomas G. Lane5ead57a1998-03-27 00:00:00 +0000127typedef struct {
128 /* Options: set by caller */
129 JXFORM_CODE transform; /* image transform operator */
Guido Vollbeding5996a252009-06-27 00:00:00 +0000130 boolean perfect; /* if TRUE, fail if partial MCUs are requested */
Thomas G. Lane5ead57a1998-03-27 00:00:00 +0000131 boolean trim; /* if TRUE, trim partial MCUs as needed */
132 boolean force_grayscale; /* if TRUE, convert color image to grayscale */
Guido Vollbeding5996a252009-06-27 00:00:00 +0000133 boolean crop; /* if TRUE, crop source image */
DRCba5ea512011-03-04 03:20:34 +0000134 boolean slow_hflip; /* For best performance, the JXFORM_FLIP_H transform
135 normally modifies the source coefficients in place.
136 Setting this to TRUE will instead use a slower,
137 double-buffered algorithm, which leaves the source
138 coefficients in tact (necessary if other transformed
139 images must be generated from the same set of
140 coefficients. */
Guido Vollbeding5996a252009-06-27 00:00:00 +0000141
142 /* Crop parameters: application need not set these unless crop is TRUE.
143 * These can be filled in by jtransform_parse_crop_spec().
144 */
145 JDIMENSION crop_width; /* Width of selected region */
Guido Vollbeding5829cb22012-01-15 00:00:00 +0000146 JCROP_CODE crop_width_set; /* (forced disables adjustment) */
Guido Vollbeding5996a252009-06-27 00:00:00 +0000147 JDIMENSION crop_height; /* Height of selected region */
Guido Vollbeding5829cb22012-01-15 00:00:00 +0000148 JCROP_CODE crop_height_set; /* (forced disables adjustment) */
Guido Vollbeding5996a252009-06-27 00:00:00 +0000149 JDIMENSION crop_xoffset; /* X offset of selected region */
150 JCROP_CODE crop_xoffset_set; /* (negative measures from right edge) */
151 JDIMENSION crop_yoffset; /* Y offset of selected region */
152 JCROP_CODE crop_yoffset_set; /* (negative measures from bottom edge) */
Thomas G. Lane5ead57a1998-03-27 00:00:00 +0000153
154 /* Internal workspace: caller should not touch these */
155 int num_components; /* # of components in workspace */
156 jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */
Guido Vollbeding5996a252009-06-27 00:00:00 +0000157 JDIMENSION output_width; /* cropped destination dimensions */
158 JDIMENSION output_height;
159 JDIMENSION x_crop_offset; /* destination crop offsets measured in iMCUs */
160 JDIMENSION y_crop_offset;
Guido Vollbeding989630f2010-01-10 00:00:00 +0000161 int iMCU_sample_width; /* destination iMCU size */
162 int iMCU_sample_height;
Thomas G. Lane5ead57a1998-03-27 00:00:00 +0000163} jpeg_transform_info;
164
165
166#if TRANSFORMS_SUPPORTED
167
Guido Vollbeding5996a252009-06-27 00:00:00 +0000168/* Parse a crop specification (written in X11 geometry style) */
169EXTERN(boolean) jtransform_parse_crop_spec
170 JPP((jpeg_transform_info *info, const char *spec));
Thomas G. Lane5ead57a1998-03-27 00:00:00 +0000171/* Request any required workspace */
Guido Vollbeding989630f2010-01-10 00:00:00 +0000172EXTERN(boolean) jtransform_request_workspace
Thomas G. Lane5ead57a1998-03-27 00:00:00 +0000173 JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info));
174/* Adjust output image parameters */
175EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters
176 JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
177 jvirt_barray_ptr *src_coef_arrays,
178 jpeg_transform_info *info));
179/* Execute the actual transformation, if any */
Guido Vollbeding5996a252009-06-27 00:00:00 +0000180EXTERN(void) jtransform_execute_transform
Thomas G. Lane5ead57a1998-03-27 00:00:00 +0000181 JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
182 jvirt_barray_ptr *src_coef_arrays,
183 jpeg_transform_info *info));
Guido Vollbeding5996a252009-06-27 00:00:00 +0000184/* Determine whether lossless transformation is perfectly
185 * possible for a specified image and transformation.
186 */
187EXTERN(boolean) jtransform_perfect_transform
188 JPP((JDIMENSION image_width, JDIMENSION image_height,
189 int MCU_width, int MCU_height,
190 JXFORM_CODE transform));
191
192/* jtransform_execute_transform used to be called
193 * jtransform_execute_transformation, but some compilers complain about
194 * routine names that long. This macro is here to avoid breaking any
195 * old source code that uses the original name...
196 */
197#define jtransform_execute_transformation jtransform_execute_transform
Thomas G. Lane5ead57a1998-03-27 00:00:00 +0000198
199#endif /* TRANSFORMS_SUPPORTED */
200
201
202/*
203 * Support for copying optional markers from source to destination file.
204 */
205
206typedef enum {
207 JCOPYOPT_NONE, /* copy no optional markers */
208 JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */
209 JCOPYOPT_ALL /* copy all optional markers */
210} JCOPY_OPTION;
211
212#define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */
213
214/* Setup decompression object to save desired markers in memory */
215EXTERN(void) jcopy_markers_setup
216 JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option));
217/* Copy markers saved in the given source object to the destination object */
218EXTERN(void) jcopy_markers_execute
219 JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
220 JCOPY_OPTION option));