src/device-flags.h

/**
 * \file device-flags.h
 * Special device flags to deal with bugs in specific devices.
 *
 * Copyright (C) 2005-2007 Richard A. Low <richard@wentnet.com>
 * Copyright (C) 2005-2007 Linus Walleij <triad@df.lth.se>
 * Copyright (C) 2006-2007 Marcus Meissner
 * Copyright (C) 2007 Ted Bullock
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the
 * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
 * Boston, MA 02111-1307, USA.
 *
 * This file is supposed to be included by both libmtp and libgphoto2.
 */

/**
 * These flags are used to indicate if some or other
 * device need special treatment. These should be possible
 * to concatenate using logical OR so please use one bit per
 * feature and lets pray we don't need more than 32 bits...
 */
#define DEVICE_FLAG_NONE 0x00000000
/**
 * This means that the PTP_OC_MTP_GetObjPropList is broken
 * in the sense that it won't return properly formatted metadata
 * for ALL files on the device when you request an object 
 * property list for object 0xFFFFFFFF with parameter 3 likewise
 * set to 0xFFFFFFFF. Compare to 
 * DEVICE_FLAG_BROKEN_MTPGETOBJECTPROPLIST which only signify
 * that it's broken when getting metadata for a SINGLE object.
 * A typical way the implementation may be broken is that it 
 * may not return a proper count of the objects.
 */
#define DEVICE_FLAG_BROKEN_MTPGETOBJPROPLIST_ALL 0x00000001
/**
 * This means that under Linux, another kernel module may 
 * be using this device's USB interface, so we need to detach 
 * it if it is. Typically this is on dual-mode devices that
 * will present both an MTP compliant interface and device
 * descriptor *and* a USB mass storage interface. If the USB
 * mass storage interface is in use, other apps (like our
 * userspace libmtp through libusb access path) cannot get in
 * and get cosy with it. So we can remove the offending 
 * application. Typically this means you have to run the program
 * as root as well.
 */
#define DEVICE_FLAG_UNLOAD_DRIVER 0x00000002
/**
 * This means that the PTP_OC_MTP_GetObjPropList is broken and
 * won't properly return all object properties if parameter 3
 * is set to 0xFFFFFFFFU.
 */
#define DEVICE_FLAG_BROKEN_MTPGETOBJPROPLIST 0x00000004
/**
 * This means the device doesn't send zero packets to indicate
 * end of transfer when the transfer boundary occurs at a 
 * multiple of 64 bytes (the USB 1.1 endpoint size). Instead, 
 * exactly one extra byte is sent at the end of the transfer 
 * if the size is an integer multiple of USB 1.1 endpoint size 
 * (64 bytes).
 *
 * This behaviour is most probably a workaround due to the fact 
 * that the hardware USB slave controller in the device cannot 
 * handle zero writes at all, and the usage of the USB 1.1 
 * endpoint size is due to the fact that the device will "gear 
 * down" on a USB 1.1 hub, and since 64 bytes is a multiple of 
 * 512 bytes, it will work with USB 1.1 and USB 2.0 alike.
 */
#define DEVICE_FLAG_NO_ZERO_READS 0x00000008
/**
 * This flag means that the device is prone to forgetting the
 * OGG container file type, so that libmtp must look at the
 * filename extensions in order to determine that a file is
 * actually OGG. This is a clear and present firmware bug, and
 * while firmware bugs should be fixed in firmware, we like
 * OGG so much that we back it by introducing this flag.
 * The error has only been seen on iriver devices. Turning this
 * flag on won't hurt anything, just that the check against
 * filename extension will be done for files of "unknown" type.
 * If the player does not even know (reports) that it supports
 * ogg even though it does, please use the stronger 
 * OGG_IS_UNKNOWN flag, which will forcedly support ogg on
 * anything with the .ogg filename extension.
 */
#define DEVICE_FLAG_IRIVER_OGG_ALZHEIMER 0x00000010
/**
 * This flag indicates a limitation in the filenames a device
 * can accept - they must be 7 bit (all chars <= 127/0x7F).
 * It was found first on the Philips Shoqbox, and is a deviation
 * from the PTP standard which mandates that any unicode chars
 * may be used for filenames. I guess this is caused by a 7bit-only
 * filesystem being used intrinsically on the device.
 */
#define DEVICE_FLAG_ONLY_7BIT_FILENAMES 0x00000020
/**
 * This flag indicates that the device will lock up if you
 * try to get status of endpoints and/or release the interface
 * when closing the device. This fixes problems with SanDisk
 * Sansa devices especially. It may be a side-effect of a
 * Windows behaviour of never releasing interfaces.
 */
#define DEVICE_FLAG_NO_RELEASE_INTERFACE 0x00000040
/**
 * This flag was introduced with the advent of Creative ZEN
 * 8GB. The device sometimes return a broken PTP header
 * like this: < 1502 0000 0200 01d1 02d1 01d2 >
 * the latter 6 bytes (representing "code" and "transaction ID")
 * contain junk. This is breaking the PTP/MTP spec but works
 * on Windows anyway, probably because the Windows implementation
 * does not check that these bytes are valid. To interoperate
 * with devices like this, we need this flag to emulate the 
 * Windows bug.
 */
#define DEVICE_FLAG_IGNORE_HEADER_ERRORS 0x00000080
/**
 * The Motorola RAZR2 V8 (others?) has broken set object
 * proplist causing the metadata setting to fail. (The
 * set object prop to set individual properties work on
 * this device, but the metadata is plain ignored on
 * tracks, though e.g. playlist names can be set.)
 */
#define DEVICE_FLAG_BROKEN_SET_OBJECT_PROPLIST 0x00000100
/**
 * The Samsung YP-T10 think Ogg files shall be sent with
 * the "unknown" (PTP_OFC_Undefined) file type, this gives a 
 * side effect that is a combination of the iRiver Ogg Alzheimer 
 * problem (have to recognized Ogg files on file extension)
 * and a need to report the Ogg support (the device itself does
 * not properly claim to support it) and need to set filetype 
 * to unknown when storing Ogg files, even though they're not
 * actually unknown. Later iRivers seem to need this flag since
 * they do not report to support OGG even though they actually
 * do.
 */
#define DEVICE_FLAG_OGG_IS_UNKNOWN 0x00000200
/**
 * The Creative Zen is quite unstable in libmtp but seems to
 * be better with later firmware versions. However, it still
 * frequently crashes when setting album art dimensions. This
 * flag disables setting the dimensions (which seems to make
 * no difference to how the graphic is displayed).
 */
#define DEVICE_FLAG_BROKEN_SET_SAMPLE_DIMENSIONS 0x00000400
/**
 * Some devices, particularly SanDisk Sansas, need to always
 * have their "OS Descriptor" probed in order to work correctly.
 * This flag provides that extra massage.
 */
#define DEVICE_FLAG_ALWAYS_PROBE_DESCRIPTOR 0x00000800
/**
 * Samsung has implimented its own playlist format as a .spl file
 * stored in the normal file system, rather than a proper mtp
 * playlist. There are multiple versions of the .spl format
 * identified by a line in the file: VERSION X.XX
 * Version 1.00 is just a simple playlist.
 */
#define DEVICE_FLAG_PLAYLIST_SPL_V1 0x00001000
/**
 * Samsung has implimented its own playlist format as a .spl file
 * stored in the normal file system, rather than a proper mtp
 * playlist. There are multiple versions of the .spl format
 * identified by a line in the file: VERSION X.XX
 * Version 2.00 is playlist but allows DNSe sound settings
 * to be stored, per playlist.
 */
#define DEVICE_FLAG_PLAYLIST_SPL_V2 0x00002000