| /* |
| * aes_icm_ossl.c |
| * |
| * AES Integer Counter Mode |
| * |
| * John A. Foley |
| * Cisco Systems, Inc. |
| * |
| * 2/24/2012: This module was modified to use CiscoSSL for AES counter |
| * mode. Eddy Lem contributed the code to allow this. |
| * |
| * 12/20/2012: Added support for AES-192 and AES-256. |
| */ |
| |
| /* |
| * |
| * Copyright (c) 2013, Cisco Systems, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * |
| * Neither the name of the Cisco Systems, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, |
| * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include <config.h> |
| #endif |
| |
| #include <openssl/evp.h> |
| #include "aes_icm_ossl.h" |
| #include "crypto_types.h" |
| #include "alloc.h" |
| #include "crypto_types.h" |
| |
| |
| debug_module_t mod_aes_icm = { |
| 0, /* debugging is off by default */ |
| "aes icm ossl" /* printable module name */ |
| }; |
| extern cipher_test_case_t aes_icm_test_case_0; |
| extern cipher_type_t aes_icm; |
| #ifndef OPENSSL_IS_BORINGSSL |
| extern cipher_type_t aes_icm_192; |
| #endif |
| extern cipher_type_t aes_icm_256; |
| |
| /* |
| * integer counter mode works as follows: |
| * |
| * 16 bits |
| * <-----> |
| * +------+------+------+------+------+------+------+------+ |
| * | nonce | packet index | ctr |---+ |
| * +------+------+------+------+------+------+------+------+ | |
| * | |
| * +------+------+------+------+------+------+------+------+ v |
| * | salt |000000|->(+) |
| * +------+------+------+------+------+------+------+------+ | |
| * | |
| * +---------+ |
| * | encrypt | |
| * +---------+ |
| * | |
| * +------+------+------+------+------+------+------+------+ | |
| * | keystream block |<--+ |
| * +------+------+------+------+------+------+------+------+ |
| * |
| * All fields are big-endian |
| * |
| * ctr is the block counter, which increments from zero for |
| * each packet (16 bits wide) |
| * |
| * packet index is distinct for each packet (48 bits wide) |
| * |
| * nonce can be distinct across many uses of the same key, or |
| * can be a fixed value per key, or can be per-packet randomness |
| * (64 bits) |
| * |
| */ |
| |
| /* |
| * This function allocates a new instance of this crypto engine. |
| * The key_len parameter should be one of 30, 38, or 46 for |
| * AES-128, AES-192, and AES-256 respectively. Note, this key_len |
| * value is inflated, as it also accounts for the 112 bit salt |
| * value. The tlen argument is for the AEAD tag length, which |
| * isn't used in counter mode. |
| */ |
| err_status_t aes_icm_openssl_alloc (cipher_t **c, int key_len, int tlen) |
| { |
| aes_icm_ctx_t *icm; |
| int tmp; |
| uint8_t *allptr; |
| |
| debug_print(mod_aes_icm, "allocating cipher with key length %d", key_len); |
| |
| /* |
| * Verify the key_len is valid for one of: AES-128/192/256 |
| */ |
| if (key_len != AES_128_KEYSIZE_WSALT && |
| #ifndef OPENSSL_IS_BORINGSSL |
| key_len != AES_192_KEYSIZE_WSALT && |
| #endif |
| key_len != AES_256_KEYSIZE_WSALT) { |
| return err_status_bad_param; |
| } |
| |
| /* allocate memory a cipher of type aes_icm */ |
| tmp = sizeof(cipher_t) + sizeof(aes_icm_ctx_t); |
| allptr = (uint8_t*)crypto_alloc(tmp); |
| if (allptr == NULL) { |
| return err_status_alloc_fail; |
| } |
| |
| /* set pointers */ |
| *c = (cipher_t*)allptr; |
| (*c)->state = allptr + sizeof(cipher_t); |
| icm = (aes_icm_ctx_t*)(*c)->state; |
| |
| /* increment ref_count */ |
| switch (key_len) { |
| case AES_128_KEYSIZE_WSALT: |
| (*c)->algorithm = AES_128_ICM; |
| (*c)->type = &aes_icm; |
| aes_icm.ref_count++; |
| ((aes_icm_ctx_t*)(*c)->state)->key_size = AES_128_KEYSIZE; |
| break; |
| #ifndef OPENSSL_IS_BORINGSSL |
| case AES_192_KEYSIZE_WSALT: |
| (*c)->algorithm = AES_192_ICM; |
| (*c)->type = &aes_icm_192; |
| aes_icm_192.ref_count++; |
| ((aes_icm_ctx_t*)(*c)->state)->key_size = AES_192_KEYSIZE; |
| break; |
| #endif |
| case AES_256_KEYSIZE_WSALT: |
| (*c)->algorithm = AES_256_ICM; |
| (*c)->type = &aes_icm_256; |
| aes_icm_256.ref_count++; |
| ((aes_icm_ctx_t*)(*c)->state)->key_size = AES_256_KEYSIZE; |
| break; |
| } |
| |
| /* set key size */ |
| (*c)->key_len = key_len; |
| EVP_CIPHER_CTX_init(&icm->ctx); |
| |
| return err_status_ok; |
| } |
| |
| |
| /* |
| * This function deallocates an instance of this engine |
| */ |
| err_status_t aes_icm_openssl_dealloc (cipher_t *c) |
| { |
| aes_icm_ctx_t *ctx; |
| |
| if (c == NULL) { |
| return err_status_bad_param; |
| } |
| |
| /* |
| * Free the EVP context |
| */ |
| ctx = (aes_icm_ctx_t*)c->state; |
| if (ctx != NULL) { |
| EVP_CIPHER_CTX_cleanup(&ctx->ctx); |
| /* decrement ref_count for the appropriate engine */ |
| switch (ctx->key_size) { |
| case AES_256_KEYSIZE: |
| aes_icm_256.ref_count--; |
| break; |
| #ifndef OPENSSL_IS_BORINGSSL |
| case AES_192_KEYSIZE: |
| aes_icm_192.ref_count--; |
| break; |
| #endif |
| case AES_128_KEYSIZE: |
| aes_icm.ref_count--; |
| break; |
| default: |
| return err_status_dealloc_fail; |
| break; |
| } |
| } |
| |
| /* zeroize entire state*/ |
| octet_string_set_to_zero((uint8_t*)c, |
| sizeof(cipher_t) + sizeof(aes_icm_ctx_t)); |
| |
| /* free memory */ |
| crypto_free(c); |
| |
| return err_status_ok; |
| } |
| |
| /* |
| * aes_icm_openssl_context_init(...) initializes the aes_icm_context |
| * using the value in key[]. |
| * |
| * the key is the secret key |
| * |
| * the salt is unpredictable (but not necessarily secret) data which |
| * randomizes the starting point in the keystream |
| */ |
| err_status_t aes_icm_openssl_context_init (aes_icm_ctx_t *c, const uint8_t *key, int len) |
| { |
| /* |
| * set counter and initial values to 'offset' value, being careful not to |
| * go past the end of the key buffer |
| */ |
| |
| if (c->key_size + SALT_SIZE != len) |
| return err_status_bad_param; |
| |
| v128_set_to_zero(&c->counter); |
| v128_set_to_zero(&c->offset); |
| memcpy(&c->counter, key + c->key_size, SALT_SIZE); |
| memcpy(&c->offset, key + c->key_size, SALT_SIZE); |
| |
| /* force last two octets of the offset to zero (for srtp compatibility) */ |
| c->offset.v8[SALT_SIZE] = c->offset.v8[SALT_SIZE + 1] = 0; |
| c->counter.v8[SALT_SIZE] = c->counter.v8[SALT_SIZE + 1] = 0; |
| |
| /* copy key to be used later when CiscoSSL crypto context is created */ |
| v128_copy_octet_string((v128_t*)&c->key, key); |
| |
| /* if the key is greater than 16 bytes, copy the second |
| * half. Note, we treat AES-192 and AES-256 the same here |
| * for simplicity. The storage location receiving the |
| * key is statically allocated to handle a full 32 byte key |
| * regardless of the cipher in use. |
| */ |
| if (c->key_size == AES_256_KEYSIZE |
| #ifndef OPENSSL_IS_BORINGSSL |
| || c->key_size == AES_192_KEYSIZE |
| #endif |
| ) { |
| debug_print(mod_aes_icm, "Copying last 16 bytes of key: %s", |
| v128_hex_string((v128_t*)(key + AES_128_KEYSIZE))); |
| v128_copy_octet_string(((v128_t*)(&c->key.v8)) + 1, key + AES_128_KEYSIZE); |
| } |
| |
| debug_print(mod_aes_icm, "key: %s", v128_hex_string((v128_t*)&c->key)); |
| debug_print(mod_aes_icm, "offset: %s", v128_hex_string(&c->offset)); |
| |
| EVP_CIPHER_CTX_cleanup(&c->ctx); |
| |
| return err_status_ok; |
| } |
| |
| |
| /* |
| * aes_icm_set_iv(c, iv) sets the counter value to the exor of iv with |
| * the offset |
| */ |
| err_status_t aes_icm_openssl_set_iv (aes_icm_ctx_t *c, void *iv, int dir) |
| { |
| const EVP_CIPHER *evp; |
| v128_t nonce; |
| |
| /* set nonce (for alignment) */ |
| v128_copy_octet_string(&nonce, iv); |
| |
| debug_print(mod_aes_icm, "setting iv: %s", v128_hex_string(&nonce)); |
| |
| v128_xor(&c->counter, &c->offset, &nonce); |
| |
| debug_print(mod_aes_icm, "set_counter: %s", v128_hex_string(&c->counter)); |
| |
| switch (c->key_size) { |
| case AES_256_KEYSIZE: |
| evp = EVP_aes_256_ctr(); |
| break; |
| #ifndef OPENSSL_IS_BORINGSSL |
| case AES_192_KEYSIZE: |
| evp = EVP_aes_192_ctr(); |
| break; |
| #endif |
| case AES_128_KEYSIZE: |
| evp = EVP_aes_128_ctr(); |
| break; |
| default: |
| return err_status_bad_param; |
| break; |
| } |
| |
| if (!EVP_EncryptInit_ex(&c->ctx, evp, |
| NULL, c->key.v8, c->counter.v8)) { |
| return err_status_fail; |
| } else { |
| return err_status_ok; |
| } |
| } |
| |
| /* |
| * This function encrypts a buffer using AES CTR mode |
| * |
| * Parameters: |
| * c Crypto context |
| * buf data to encrypt |
| * enc_len length of encrypt buffer |
| */ |
| err_status_t aes_icm_openssl_encrypt (aes_icm_ctx_t *c, unsigned char *buf, unsigned int *enc_len) |
| { |
| int len = 0; |
| |
| debug_print(mod_aes_icm, "rs0: %s", v128_hex_string(&c->counter)); |
| |
| if (!EVP_EncryptUpdate(&c->ctx, buf, &len, buf, *enc_len)) { |
| return err_status_cipher_fail; |
| } |
| *enc_len = len; |
| |
| if (!EVP_EncryptFinal_ex(&c->ctx, buf, &len)) { |
| return err_status_cipher_fail; |
| } |
| *enc_len += len; |
| |
| return err_status_ok; |
| } |
| |
| uint16_t aes_icm_bytes_encrypted(aes_icm_ctx_t *c) |
| { |
| return htons(c->counter.v16[7]); |
| } |
| |
| /* |
| * Name of this crypto engine |
| */ |
| char aes_icm_openssl_description[] = "AES-128 counter mode using openssl"; |
| #ifndef OPENSSL_IS_BORINGSSL |
| char aes_icm_192_openssl_description[] = "AES-192 counter mode using openssl"; |
| #endif |
| char aes_icm_256_openssl_description[] = "AES-256 counter mode using openssl"; |
| |
| |
| /* |
| * KAT values for AES self-test. These |
| * values came from the legacy libsrtp code. |
| */ |
| uint8_t aes_icm_test_case_0_key[AES_128_KEYSIZE_WSALT] = { |
| 0x2b, 0x7e, 0x15, 0x16, 0x28, 0xae, 0xd2, 0xa6, |
| 0xab, 0xf7, 0x15, 0x88, 0x09, 0xcf, 0x4f, 0x3c, |
| 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, |
| 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd |
| }; |
| |
| uint8_t aes_icm_test_case_0_nonce[16] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
| }; |
| |
| uint8_t aes_icm_test_case_0_plaintext[32] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| uint8_t aes_icm_test_case_0_ciphertext[32] = { |
| 0xe0, 0x3e, 0xad, 0x09, 0x35, 0xc9, 0x5e, 0x80, |
| 0xe1, 0x66, 0xb1, 0x6d, 0xd9, 0x2b, 0x4e, 0xb4, |
| 0xd2, 0x35, 0x13, 0x16, 0x2b, 0x02, 0xd0, 0xf7, |
| 0x2a, 0x43, 0xa2, 0xfe, 0x4a, 0x5f, 0x97, 0xab |
| }; |
| |
| cipher_test_case_t aes_icm_test_case_0 = { |
| AES_128_KEYSIZE_WSALT, /* octets in key */ |
| aes_icm_test_case_0_key, /* key */ |
| aes_icm_test_case_0_nonce, /* packet index */ |
| 32, /* octets in plaintext */ |
| aes_icm_test_case_0_plaintext, /* plaintext */ |
| 32, /* octets in ciphertext */ |
| aes_icm_test_case_0_ciphertext, /* ciphertext */ |
| 0, |
| NULL, |
| 0, |
| NULL /* pointer to next testcase */ |
| }; |
| |
| #ifndef OPENSSL_IS_BORINGSSL |
| /* |
| * KAT values for AES-192-CTR self-test. These |
| * values came from section 7 of RFC 6188. |
| */ |
| uint8_t aes_icm_192_test_case_1_key[AES_192_KEYSIZE_WSALT] = { |
| 0xea, 0xb2, 0x34, 0x76, 0x4e, 0x51, 0x7b, 0x2d, |
| 0x3d, 0x16, 0x0d, 0x58, 0x7d, 0x8c, 0x86, 0x21, |
| 0x97, 0x40, 0xf6, 0x5f, 0x99, 0xb6, 0xbc, 0xf7, |
| 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, |
| 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd |
| }; |
| |
| uint8_t aes_icm_192_test_case_1_nonce[16] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
| }; |
| |
| uint8_t aes_icm_192_test_case_1_plaintext[32] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| uint8_t aes_icm_192_test_case_1_ciphertext[32] = { |
| 0x35, 0x09, 0x6c, 0xba, 0x46, 0x10, 0x02, 0x8d, |
| 0xc1, 0xb5, 0x75, 0x03, 0x80, 0x4c, 0xe3, 0x7c, |
| 0x5d, 0xe9, 0x86, 0x29, 0x1d, 0xcc, 0xe1, 0x61, |
| 0xd5, 0x16, 0x5e, 0xc4, 0x56, 0x8f, 0x5c, 0x9a |
| }; |
| |
| cipher_test_case_t aes_icm_192_test_case_1 = { |
| AES_192_KEYSIZE_WSALT, /* octets in key */ |
| aes_icm_192_test_case_1_key, /* key */ |
| aes_icm_192_test_case_1_nonce, /* packet index */ |
| 32, /* octets in plaintext */ |
| aes_icm_192_test_case_1_plaintext, /* plaintext */ |
| 32, /* octets in ciphertext */ |
| aes_icm_192_test_case_1_ciphertext, /* ciphertext */ |
| 0, |
| NULL, |
| 0, |
| NULL /* pointer to next testcase */ |
| }; |
| #endif |
| |
| /* |
| * KAT values for AES-256-CTR self-test. These |
| * values came from section 7 of RFC 6188. |
| */ |
| uint8_t aes_icm_256_test_case_2_key[AES_256_KEYSIZE_WSALT] = { |
| 0x57, 0xf8, 0x2f, 0xe3, 0x61, 0x3f, 0xd1, 0x70, |
| 0xa8, 0x5e, 0xc9, 0x3c, 0x40, 0xb1, 0xf0, 0x92, |
| 0x2e, 0xc4, 0xcb, 0x0d, 0xc0, 0x25, 0xb5, 0x82, |
| 0x72, 0x14, 0x7c, 0xc4, 0x38, 0x94, 0x4a, 0x98, |
| 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, |
| 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd |
| }; |
| |
| uint8_t aes_icm_256_test_case_2_nonce[16] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
| }; |
| |
| uint8_t aes_icm_256_test_case_2_plaintext[32] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| uint8_t aes_icm_256_test_case_2_ciphertext[32] = { |
| 0x92, 0xbd, 0xd2, 0x8a, 0x93, 0xc3, 0xf5, 0x25, |
| 0x11, 0xc6, 0x77, 0xd0, 0x8b, 0x55, 0x15, 0xa4, |
| 0x9d, 0xa7, 0x1b, 0x23, 0x78, 0xa8, 0x54, 0xf6, |
| 0x70, 0x50, 0x75, 0x6d, 0xed, 0x16, 0x5b, 0xac |
| }; |
| |
| cipher_test_case_t aes_icm_256_test_case_2 = { |
| AES_256_KEYSIZE_WSALT, /* octets in key */ |
| aes_icm_256_test_case_2_key, /* key */ |
| aes_icm_256_test_case_2_nonce, /* packet index */ |
| 32, /* octets in plaintext */ |
| aes_icm_256_test_case_2_plaintext, /* plaintext */ |
| 32, /* octets in ciphertext */ |
| aes_icm_256_test_case_2_ciphertext, /* ciphertext */ |
| 0, |
| NULL, |
| 0, |
| NULL /* pointer to next testcase */ |
| }; |
| |
| /* |
| * This is the function table for this crypto engine. |
| * note: the encrypt function is identical to the decrypt function |
| */ |
| cipher_type_t aes_icm = { |
| (cipher_alloc_func_t) aes_icm_openssl_alloc, |
| (cipher_dealloc_func_t) aes_icm_openssl_dealloc, |
| (cipher_init_func_t) aes_icm_openssl_context_init, |
| (cipher_set_aad_func_t) 0, |
| (cipher_encrypt_func_t) aes_icm_openssl_encrypt, |
| (cipher_decrypt_func_t) aes_icm_openssl_encrypt, |
| (cipher_set_iv_func_t) aes_icm_openssl_set_iv, |
| (cipher_get_tag_func_t) 0, |
| (char*) aes_icm_openssl_description, |
| (int) 0, /* instance count */ |
| (cipher_test_case_t*) &aes_icm_test_case_0, |
| (debug_module_t*) &mod_aes_icm, |
| (cipher_type_id_t) AES_ICM |
| }; |
| |
| #ifndef OPENSSL_IS_BORINGSSL |
| /* |
| * This is the function table for this crypto engine. |
| * note: the encrypt function is identical to the decrypt function |
| */ |
| cipher_type_t aes_icm_192 = { |
| (cipher_alloc_func_t) aes_icm_openssl_alloc, |
| (cipher_dealloc_func_t) aes_icm_openssl_dealloc, |
| (cipher_init_func_t) aes_icm_openssl_context_init, |
| (cipher_set_aad_func_t) 0, |
| (cipher_encrypt_func_t) aes_icm_openssl_encrypt, |
| (cipher_decrypt_func_t) aes_icm_openssl_encrypt, |
| (cipher_set_iv_func_t) aes_icm_openssl_set_iv, |
| (cipher_get_tag_func_t) 0, |
| (char*) aes_icm_192_openssl_description, |
| (int) 0, /* instance count */ |
| (cipher_test_case_t*) &aes_icm_192_test_case_1, |
| (debug_module_t*) &mod_aes_icm, |
| (cipher_type_id_t) AES_192_ICM |
| }; |
| #endif |
| |
| /* |
| * This is the function table for this crypto engine. |
| * note: the encrypt function is identical to the decrypt function |
| */ |
| cipher_type_t aes_icm_256 = { |
| (cipher_alloc_func_t) aes_icm_openssl_alloc, |
| (cipher_dealloc_func_t) aes_icm_openssl_dealloc, |
| (cipher_init_func_t) aes_icm_openssl_context_init, |
| (cipher_set_aad_func_t) 0, |
| (cipher_encrypt_func_t) aes_icm_openssl_encrypt, |
| (cipher_decrypt_func_t) aes_icm_openssl_encrypt, |
| (cipher_set_iv_func_t) aes_icm_openssl_set_iv, |
| (cipher_get_tag_func_t) 0, |
| (char*) aes_icm_256_openssl_description, |
| (int) 0, /* instance count */ |
| (cipher_test_case_t*) &aes_icm_256_test_case_2, |
| (debug_module_t*) &mod_aes_icm, |
| (cipher_type_id_t) AES_256_ICM |
| }; |
| |