doc/Makefile.in

# Makefile.in generated by automake 1.6.3 from Makefile.am.
# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@

EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AR = @AR@
ARCH = @ARCH@
AS = @AS@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASFLAGS = @CCASFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
EGREP = @EGREP@
F77 = @F77@
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
RC = @RC@
STRIP = @STRIP@
VERSION = @VERSION@
am__include = @am__include@
am__quote = @am__quote@
arch = @arch@
install_sh = @install_sh@

# man pages that go into section 3:
man3_MANS = libunwind.man libunwind-ia64.man		\
	libunwind-ptrace.man libunwind-setjmp.man	\
	unw_flush_cache.man				\
	unw_get_accessors.man				\
	unw_get_proc_info.man unw_get_proc_name.man	\
	unw_get_fpreg.man				\
	unw_get_reg.man					\
	unw_getcontext.man				\
	unw_init_local.man unw_init_remote.man		\
	unw_is_fpreg.man				\
	unw_is_signal_frame.man				\
	unw_create_addr_space.man			\
	unw_destroy_addr_space.man			\
	unw_regname.man unw_resume.man			\
	unw_set_caching_policy.man			\
	unw_set_fpreg.man				\
	unw_set_reg.man					\
	unw_step.man


EXTRA_DIST = NOTES libunwind.trans					\
	libunwind.tex libunwind-ia64.tex libunwind-ptrace.tex		\
	libunwind-setjmp.tex						\
	unw_flush_cache.tex						\
	unw_get_accessors.tex						\
	unw_get_proc_info.tex unw_get_proc_name.tex			\
	unw_get_fpreg.tex						\
	unw_get_reg.tex							\
	unw_getcontext.tex						\
	unw_init_local.tex unw_init_remote.tex				\
	unw_is_fpreg.tex						\
	unw_is_signal_frame.tex						\
	unw_create_addr_space.tex unw_destroy_addr_space.tex		\
	unw_regname.tex unw_resume.tex unw_set_caching_policy.tex	\
	unw_set_fpreg.tex						\
	unw_set_reg.tex							\
	unw_step.tex							\
	$(man3_MANS)


L2M = latex2man
L2P = pdflatex
L2M_CMD = $(L2M) -t $(srcdir)/libunwind.trans
L2H_CMD = $(L2M) -H -t $(srcdir)/libunwind.trans
subdir = doc
mkinstalldirs = $(SHELL) $(top_srcdir)/aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/include/config.h
CONFIG_CLEAN_FILES = common.tex
DIST_SOURCES =

NROFF = nroff
MANS = $(man3_MANS)
DIST_COMMON = Makefile.am Makefile.in common.tex.in
all: all-am

.SUFFIXES:
.SUFFIXES: .man .tex
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
common.tex: $(top_builddir)/config.status common.tex.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

man3dir = $(mandir)/man3
install-man3: $(man3_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(man3dir)
	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.3*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    3*) ;; \
	    *) ext='3' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst; \
	done
uninstall-man3:
	@$(NORMAL_UNINSTALL)
	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.3*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man3dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man3dir)/$$inst; \
	done
tags: TAGS
TAGS:

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	@list='$(DISTFILES)'; for file in $$list; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(MANS)

installdirs:
	$(mkinstalldirs) $(DESTDIR)$(man3dir)

install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am

distclean-am: clean-am distclean-generic distclean-libtool

dvi: dvi-am

dvi-am:

info: info-am

info-am:

install-data-am: install-man

install-exec-am:

install-info: install-info-am

install-man: install-man3

installcheck-am:

maintainer-clean: maintainer-clean-am

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

uninstall-am: uninstall-info-am uninstall-man

uninstall-man: uninstall-man3

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	distclean distclean-generic distclean-libtool distdir dvi \
	dvi-am info info-am install install-am install-data \
	install-data-am install-exec install-exec-am install-info \
	install-info-am install-man install-man3 install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool uninstall uninstall-am uninstall-info-am \
	uninstall-man uninstall-man3


.tex.man:
	$(L2M_CMD) $< $@
	-bk get -e $(srcdir)/$@
	-cp $@ $(srcdir)/$@

html:
	for n in $(man3_MANS); do					\
		page=`basename $$n .man`;				\
		$(L2H_CMD) $(srcdir)/$$page.tex "$$page(3).php";	\
	done

pdf:
	for n in $(man3_MANS); do					\
		page=`basename $$n .man`;				\
		$(L2P) $(srcdir)/$$page.tex "$$page(3).pdf";		\
	done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: