San Mehat | a430b2b | 2014-09-23 08:30:51 -0700 | [diff] [blame] | 1 | # Makefile.in generated by automake 1.11.6 from Makefile.am. |
| 2 | # webclients/Makefile. Generated from Makefile.in by configure. |
| 3 | |
| 4 | # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| 5 | # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software |
| 6 | # Foundation, Inc. |
| 7 | # This Makefile.in is free software; the Free Software Foundation |
| 8 | # gives unlimited permission to copy and/or distribute it, |
| 9 | # with or without modifications, as long as this notice is preserved. |
| 10 | |
| 11 | # This program is distributed in the hope that it will be useful, |
| 12 | # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| 13 | # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| 14 | # PARTICULAR PURPOSE. |
| 15 | |
| 16 | |
| 17 | |
| 18 | am__make_dryrun = \ |
| 19 | { \ |
| 20 | am__dry=no; \ |
| 21 | case $$MAKEFLAGS in \ |
| 22 | *\\[\ \ ]*) \ |
| 23 | echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ |
| 24 | | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ |
| 25 | *) \ |
| 26 | for am__flg in $$MAKEFLAGS; do \ |
| 27 | case $$am__flg in \ |
| 28 | *=*|--*) ;; \ |
| 29 | *n*) am__dry=yes; break;; \ |
| 30 | esac; \ |
| 31 | done;; \ |
| 32 | esac; \ |
| 33 | test $$am__dry = yes; \ |
| 34 | } |
| 35 | pkgdatadir = $(datadir)/LibVNCServer |
| 36 | pkgincludedir = $(includedir)/LibVNCServer |
| 37 | pkglibdir = $(libdir)/LibVNCServer |
| 38 | pkglibexecdir = $(libexecdir)/LibVNCServer |
| 39 | am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| 40 | install_sh_DATA = $(install_sh) -c -m 644 |
| 41 | install_sh_PROGRAM = $(install_sh) -c |
| 42 | install_sh_SCRIPT = $(install_sh) -c |
| 43 | INSTALL_HEADER = $(INSTALL_DATA) |
| 44 | transform = $(program_transform_name) |
| 45 | NORMAL_INSTALL = : |
| 46 | PRE_INSTALL = : |
| 47 | POST_INSTALL = : |
| 48 | NORMAL_UNINSTALL = : |
| 49 | PRE_UNINSTALL = : |
| 50 | POST_UNINSTALL = : |
| 51 | build_triplet = x86_64-unknown-linux-gnu |
| 52 | host_triplet = x86_64-unknown-linux-gnu |
| 53 | subdir = webclients |
| 54 | DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in |
| 55 | ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| 56 | am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ |
| 57 | $(top_srcdir)/configure.ac |
| 58 | am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| 59 | $(ACLOCAL_M4) |
| 60 | mkinstalldirs = $(install_sh) -d |
| 61 | CONFIG_HEADER = $(top_builddir)/rfbconfig.h |
| 62 | CONFIG_CLEAN_FILES = |
| 63 | CONFIG_CLEAN_VPATH_FILES = |
| 64 | AM_V_GEN = $(am__v_GEN_$(V)) |
| 65 | am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) |
| 66 | am__v_GEN_0 = @echo " GEN " $@; |
| 67 | AM_V_at = $(am__v_at_$(V)) |
| 68 | am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) |
| 69 | am__v_at_0 = @ |
| 70 | SOURCES = |
| 71 | DIST_SOURCES = |
| 72 | RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| 73 | html-recursive info-recursive install-data-recursive \ |
| 74 | install-dvi-recursive install-exec-recursive \ |
| 75 | install-html-recursive install-info-recursive \ |
| 76 | install-pdf-recursive install-ps-recursive install-recursive \ |
| 77 | installcheck-recursive installdirs-recursive pdf-recursive \ |
| 78 | ps-recursive uninstall-recursive |
| 79 | am__can_run_installinfo = \ |
| 80 | case $$AM_UPDATE_INFO_DIR in \ |
| 81 | n|no|NO) false;; \ |
| 82 | *) (install-info --version) >/dev/null 2>&1;; \ |
| 83 | esac |
| 84 | RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| 85 | distclean-recursive maintainer-clean-recursive |
| 86 | AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ |
| 87 | $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ |
| 88 | distdir |
| 89 | ETAGS = etags |
| 90 | CTAGS = ctags |
| 91 | DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| 92 | am__relativize = \ |
| 93 | dir0=`pwd`; \ |
| 94 | sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| 95 | sed_rest='s,^[^/]*/*,,'; \ |
| 96 | sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| 97 | sed_butlast='s,/*[^/]*$$,,'; \ |
| 98 | while test -n "$$dir1"; do \ |
| 99 | first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| 100 | if test "$$first" != "."; then \ |
| 101 | if test "$$first" = ".."; then \ |
| 102 | dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| 103 | dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| 104 | else \ |
| 105 | first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| 106 | if test "$$first2" = "$$first"; then \ |
| 107 | dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| 108 | else \ |
| 109 | dir2="../$$dir2"; \ |
| 110 | fi; \ |
| 111 | dir0="$$dir0"/"$$first"; \ |
| 112 | fi; \ |
| 113 | fi; \ |
| 114 | dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| 115 | done; \ |
| 116 | reldir="$$dir2" |
| 117 | ACLOCAL = ${SHELL} /data/src/android-master/external/libvncserver/missing --run aclocal-1.11 |
| 118 | AMTAR = $${TAR-tar} |
| 119 | AM_DEFAULT_VERBOSITY = 0 |
| 120 | AR = /usr/bin/ar |
| 121 | AS = as |
| 122 | AUTOCONF = ${SHELL} /data/src/android-master/external/libvncserver/missing --run autoconf |
| 123 | AUTOHEADER = ${SHELL} /data/src/android-master/external/libvncserver/missing --run autoheader |
| 124 | AUTOMAKE = ${SHELL} /data/src/android-master/external/libvncserver/missing --run automake-1.11 |
| 125 | AVAHI_CFLAGS = |
| 126 | AVAHI_LIBS = |
| 127 | AWK = mawk |
| 128 | CC = gcc |
| 129 | CCDEPMODE = depmode=gcc3 |
| 130 | CFLAGS = -g -O2 -Wall |
| 131 | CPP = gcc -E |
| 132 | CPPFLAGS = |
| 133 | CRYPT_LIBS = -lcrypt |
| 134 | CXX = g++ |
| 135 | CXXCPP = g++ -E |
| 136 | CXXDEPMODE = depmode=gcc3 |
| 137 | CXXFLAGS = -g -O2 |
| 138 | CYGPATH_W = echo |
| 139 | DEFS = -DHAVE_CONFIG_H |
| 140 | DEPDIR = .deps |
| 141 | DLLTOOL = dlltool |
| 142 | ECHO = echo |
| 143 | ECHO_C = |
| 144 | ECHO_N = -n |
| 145 | ECHO_T = |
| 146 | EGREP = /bin/grep -E |
| 147 | EXEEXT = |
| 148 | F77 = |
| 149 | FFLAGS = |
| 150 | GNUTLS_CFLAGS = |
| 151 | GNUTLS_LIBS = |
| 152 | GREP = /bin/grep |
| 153 | GTK_CFLAGS = |
| 154 | GTK_LIBS = |
| 155 | INSTALL = /usr/bin/install -c |
| 156 | INSTALL_DATA = ${INSTALL} -m 644 |
| 157 | INSTALL_PROGRAM = ${INSTALL} |
| 158 | INSTALL_SCRIPT = ${INSTALL} |
| 159 | INSTALL_STRIP_PROGRAM = $(install_sh) -c -s |
| 160 | JPEG_LDFLAGS = |
| 161 | LDFLAGS = |
| 162 | LIBGCRYPT_CFLAGS = |
| 163 | LIBGCRYPT_CONFIG = no |
| 164 | LIBGCRYPT_LIBS = |
| 165 | LIBOBJS = |
| 166 | LIBS = -lnsl -lpthread -lz -lpng -ljpeg -lresolv |
| 167 | LIBTOOL = $(SHELL) $(top_builddir)/libtool |
| 168 | LN_S = ln -s |
| 169 | LTLIBOBJS = |
| 170 | MAKEINFO = ${SHELL} /data/src/android-master/external/libvncserver/missing --run makeinfo |
| 171 | MKDIR_P = /bin/mkdir -p |
| 172 | OBJDUMP = objdump |
| 173 | OBJEXT = o |
| 174 | PACKAGE = LibVNCServer |
| 175 | PACKAGE_BUGREPORT = http://sourceforge.net/projects/libvncserver |
| 176 | PACKAGE_NAME = LibVNCServer |
| 177 | PACKAGE_STRING = LibVNCServer 0.9.9 |
| 178 | PACKAGE_TARNAME = libvncserver |
| 179 | PACKAGE_URL = |
| 180 | PACKAGE_VERSION = 0.9.9 |
| 181 | PATH_SEPARATOR = : |
| 182 | PKG_CONFIG = /usr/bin/pkg-config |
| 183 | PKG_CONFIG_LIBDIR = |
| 184 | PKG_CONFIG_PATH = |
| 185 | RANLIB = ranlib |
| 186 | RPMSOURCEDIR = NOT-FOUND |
| 187 | SDL_CFLAGS = |
| 188 | SDL_LIBS = |
| 189 | SET_MAKE = |
| 190 | SHELL = /bin/bash |
| 191 | SSL_LIBS = |
| 192 | STRIP = strip |
| 193 | SYSTEM_LIBVNCSERVER_CFLAGS = |
| 194 | SYSTEM_LIBVNCSERVER_LIBS = |
| 195 | VERSION = 0.9.9 |
| 196 | WSOCKLIB = |
| 197 | XMKMF = |
| 198 | X_CFLAGS = |
| 199 | X_EXTRA_LIBS = |
| 200 | X_LIBS = |
| 201 | X_PRE_LIBS = -lSM -lICE |
| 202 | abs_builddir = /data/src/android-master/external/libvncserver/webclients |
| 203 | abs_srcdir = /data/src/android-master/external/libvncserver/webclients |
| 204 | abs_top_builddir = /data/src/android-master/external/libvncserver |
| 205 | abs_top_srcdir = /data/src/android-master/external/libvncserver |
| 206 | ac_ct_CC = gcc |
| 207 | ac_ct_CXX = g++ |
| 208 | ac_ct_F77 = |
| 209 | am__include = include |
| 210 | am__leading_dot = . |
| 211 | am__quote = |
| 212 | am__tar = $${TAR-tar} chof - "$$tardir" |
| 213 | am__untar = $${TAR-tar} xf - |
| 214 | bindir = ${exec_prefix}/bin |
| 215 | build = x86_64-unknown-linux-gnu |
| 216 | build_alias = |
| 217 | build_cpu = x86_64 |
| 218 | build_os = linux-gnu |
| 219 | build_vendor = unknown |
| 220 | builddir = . |
| 221 | datadir = ${datarootdir} |
| 222 | datarootdir = ${prefix}/share |
| 223 | docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} |
| 224 | dvidir = ${docdir} |
| 225 | exec_prefix = ${prefix} |
| 226 | host = x86_64-unknown-linux-gnu |
| 227 | host_alias = |
| 228 | host_cpu = x86_64 |
| 229 | host_os = linux-gnu |
| 230 | host_vendor = unknown |
| 231 | htmldir = ${docdir} |
| 232 | includedir = ${prefix}/include |
| 233 | infodir = ${datarootdir}/info |
| 234 | install_sh = ${SHELL} /data/src/android-master/external/libvncserver/install-sh |
| 235 | libdir = ${exec_prefix}/lib |
| 236 | libexecdir = ${exec_prefix}/libexec |
| 237 | localedir = ${datarootdir}/locale |
| 238 | localstatedir = ${prefix}/var |
| 239 | mandir = ${datarootdir}/man |
| 240 | mkdir_p = /bin/mkdir -p |
| 241 | oldincludedir = /usr/include |
| 242 | pdfdir = ${docdir} |
| 243 | prefix = /usr/local |
| 244 | program_transform_name = s,x,x, |
| 245 | psdir = ${docdir} |
| 246 | sbindir = ${exec_prefix}/sbin |
| 247 | sharedstatedir = ${prefix}/com |
| 248 | srcdir = . |
| 249 | sysconfdir = ${prefix}/etc |
| 250 | target_alias = |
| 251 | top_build_prefix = ../ |
| 252 | top_builddir = .. |
| 253 | top_srcdir = .. |
| 254 | with_ffmpeg = |
| 255 | SUBDIRS = java-applet |
| 256 | DIST_SUBDIRS = java-applet |
| 257 | EXTRA_DIST = index.vnc novnc |
| 258 | all: all-recursive |
| 259 | |
| 260 | .SUFFIXES: |
| 261 | $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) |
| 262 | @for dep in $?; do \ |
| 263 | case '$(am__configure_deps)' in \ |
| 264 | *$$dep*) \ |
| 265 | ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| 266 | && { if test -f $@; then exit 0; else break; fi; }; \ |
| 267 | exit 1;; \ |
| 268 | esac; \ |
| 269 | done; \ |
| 270 | echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu webclients/Makefile'; \ |
| 271 | $(am__cd) $(top_srcdir) && \ |
| 272 | $(AUTOMAKE) --gnu webclients/Makefile |
| 273 | .PRECIOUS: Makefile |
| 274 | Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| 275 | @case '$?' in \ |
| 276 | *config.status*) \ |
| 277 | cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| 278 | *) \ |
| 279 | echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| 280 | cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| 281 | esac; |
| 282 | |
| 283 | $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| 284 | cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| 285 | |
| 286 | $(top_srcdir)/configure: $(am__configure_deps) |
| 287 | cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| 288 | $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| 289 | cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| 290 | $(am__aclocal_m4_deps): |
| 291 | |
| 292 | mostlyclean-libtool: |
| 293 | -rm -f *.lo |
| 294 | |
| 295 | clean-libtool: |
| 296 | -rm -rf .libs _libs |
| 297 | |
| 298 | # This directory's subdirectories are mostly independent; you can cd |
| 299 | # into them and run `make' without going through this Makefile. |
| 300 | # To change the values of `make' variables: instead of editing Makefiles, |
| 301 | # (1) if the variable is set in `config.status', edit `config.status' |
| 302 | # (which will cause the Makefiles to be regenerated when you run `make'); |
| 303 | # (2) otherwise, pass the desired values on the `make' command line. |
| 304 | $(RECURSIVE_TARGETS): |
| 305 | @fail= failcom='exit 1'; \ |
| 306 | for f in x $$MAKEFLAGS; do \ |
| 307 | case $$f in \ |
| 308 | *=* | --[!k]*);; \ |
| 309 | *k*) failcom='fail=yes';; \ |
| 310 | esac; \ |
| 311 | done; \ |
| 312 | dot_seen=no; \ |
| 313 | target=`echo $@ | sed s/-recursive//`; \ |
| 314 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
| 315 | echo "Making $$target in $$subdir"; \ |
| 316 | if test "$$subdir" = "."; then \ |
| 317 | dot_seen=yes; \ |
| 318 | local_target="$$target-am"; \ |
| 319 | else \ |
| 320 | local_target="$$target"; \ |
| 321 | fi; \ |
| 322 | ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| 323 | || eval $$failcom; \ |
| 324 | done; \ |
| 325 | if test "$$dot_seen" = "no"; then \ |
| 326 | $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| 327 | fi; test -z "$$fail" |
| 328 | |
| 329 | $(RECURSIVE_CLEAN_TARGETS): |
| 330 | @fail= failcom='exit 1'; \ |
| 331 | for f in x $$MAKEFLAGS; do \ |
| 332 | case $$f in \ |
| 333 | *=* | --[!k]*);; \ |
| 334 | *k*) failcom='fail=yes';; \ |
| 335 | esac; \ |
| 336 | done; \ |
| 337 | dot_seen=no; \ |
| 338 | case "$@" in \ |
| 339 | distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| 340 | *) list='$(SUBDIRS)' ;; \ |
| 341 | esac; \ |
| 342 | rev=''; for subdir in $$list; do \ |
| 343 | if test "$$subdir" = "."; then :; else \ |
| 344 | rev="$$subdir $$rev"; \ |
| 345 | fi; \ |
| 346 | done; \ |
| 347 | rev="$$rev ."; \ |
| 348 | target=`echo $@ | sed s/-recursive//`; \ |
| 349 | for subdir in $$rev; do \ |
| 350 | echo "Making $$target in $$subdir"; \ |
| 351 | if test "$$subdir" = "."; then \ |
| 352 | local_target="$$target-am"; \ |
| 353 | else \ |
| 354 | local_target="$$target"; \ |
| 355 | fi; \ |
| 356 | ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| 357 | || eval $$failcom; \ |
| 358 | done && test -z "$$fail" |
| 359 | tags-recursive: |
| 360 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
| 361 | test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| 362 | done |
| 363 | ctags-recursive: |
| 364 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
| 365 | test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| 366 | done |
| 367 | |
| 368 | ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| 369 | list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| 370 | unique=`for i in $$list; do \ |
| 371 | if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| 372 | done | \ |
| 373 | $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| 374 | END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| 375 | mkid -fID $$unique |
| 376 | tags: TAGS |
| 377 | |
| 378 | TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| 379 | $(TAGS_FILES) $(LISP) |
| 380 | set x; \ |
| 381 | here=`pwd`; \ |
| 382 | if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| 383 | include_option=--etags-include; \ |
| 384 | empty_fix=.; \ |
| 385 | else \ |
| 386 | include_option=--include; \ |
| 387 | empty_fix=; \ |
| 388 | fi; \ |
| 389 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
| 390 | if test "$$subdir" = .; then :; else \ |
| 391 | test ! -f $$subdir/TAGS || \ |
| 392 | set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| 393 | fi; \ |
| 394 | done; \ |
| 395 | list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| 396 | unique=`for i in $$list; do \ |
| 397 | if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| 398 | done | \ |
| 399 | $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| 400 | END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| 401 | shift; \ |
| 402 | if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| 403 | test -n "$$unique" || unique=$$empty_fix; \ |
| 404 | if test $$# -gt 0; then \ |
| 405 | $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| 406 | "$$@" $$unique; \ |
| 407 | else \ |
| 408 | $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| 409 | $$unique; \ |
| 410 | fi; \ |
| 411 | fi |
| 412 | ctags: CTAGS |
| 413 | CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| 414 | $(TAGS_FILES) $(LISP) |
| 415 | list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| 416 | unique=`for i in $$list; do \ |
| 417 | if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| 418 | done | \ |
| 419 | $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| 420 | END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| 421 | test -z "$(CTAGS_ARGS)$$unique" \ |
| 422 | || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| 423 | $$unique |
| 424 | |
| 425 | GTAGS: |
| 426 | here=`$(am__cd) $(top_builddir) && pwd` \ |
| 427 | && $(am__cd) $(top_srcdir) \ |
| 428 | && gtags -i $(GTAGS_ARGS) "$$here" |
| 429 | |
| 430 | distclean-tags: |
| 431 | -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| 432 | |
| 433 | distdir: $(DISTFILES) |
| 434 | @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| 435 | topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| 436 | list='$(DISTFILES)'; \ |
| 437 | dist_files=`for file in $$list; do echo $$file; done | \ |
| 438 | sed -e "s|^$$srcdirstrip/||;t" \ |
| 439 | -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| 440 | case $$dist_files in \ |
| 441 | */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| 442 | sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| 443 | sort -u` ;; \ |
| 444 | esac; \ |
| 445 | for file in $$dist_files; do \ |
| 446 | if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| 447 | if test -d $$d/$$file; then \ |
| 448 | dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| 449 | if test -d "$(distdir)/$$file"; then \ |
| 450 | find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| 451 | fi; \ |
| 452 | if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| 453 | cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| 454 | find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| 455 | fi; \ |
| 456 | cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| 457 | else \ |
| 458 | test -f "$(distdir)/$$file" \ |
| 459 | || cp -p $$d/$$file "$(distdir)/$$file" \ |
| 460 | || exit 1; \ |
| 461 | fi; \ |
| 462 | done |
| 463 | @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| 464 | if test "$$subdir" = .; then :; else \ |
| 465 | $(am__make_dryrun) \ |
| 466 | || test -d "$(distdir)/$$subdir" \ |
| 467 | || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| 468 | || exit 1; \ |
| 469 | dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| 470 | $(am__relativize); \ |
| 471 | new_distdir=$$reldir; \ |
| 472 | dir1=$$subdir; dir2="$(top_distdir)"; \ |
| 473 | $(am__relativize); \ |
| 474 | new_top_distdir=$$reldir; \ |
| 475 | echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| 476 | echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| 477 | ($(am__cd) $$subdir && \ |
| 478 | $(MAKE) $(AM_MAKEFLAGS) \ |
| 479 | top_distdir="$$new_top_distdir" \ |
| 480 | distdir="$$new_distdir" \ |
| 481 | am__remove_distdir=: \ |
| 482 | am__skip_length_check=: \ |
| 483 | am__skip_mode_fix=: \ |
| 484 | distdir) \ |
| 485 | || exit 1; \ |
| 486 | fi; \ |
| 487 | done |
| 488 | check-am: all-am |
| 489 | check: check-recursive |
| 490 | all-am: Makefile |
| 491 | installdirs: installdirs-recursive |
| 492 | installdirs-am: |
| 493 | install: install-recursive |
| 494 | install-exec: install-exec-recursive |
| 495 | install-data: install-data-recursive |
| 496 | uninstall: uninstall-recursive |
| 497 | |
| 498 | install-am: all-am |
| 499 | @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| 500 | |
| 501 | installcheck: installcheck-recursive |
| 502 | install-strip: |
| 503 | if test -z '$(STRIP)'; then \ |
| 504 | $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| 505 | install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| 506 | install; \ |
| 507 | else \ |
| 508 | $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| 509 | install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| 510 | "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| 511 | fi |
| 512 | mostlyclean-generic: |
| 513 | |
| 514 | clean-generic: |
| 515 | |
| 516 | distclean-generic: |
| 517 | -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| 518 | -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| 519 | |
| 520 | maintainer-clean-generic: |
| 521 | @echo "This command is intended for maintainers to use" |
| 522 | @echo "it deletes files that may require special tools to rebuild." |
| 523 | clean: clean-recursive |
| 524 | |
| 525 | clean-am: clean-generic clean-libtool mostlyclean-am |
| 526 | |
| 527 | distclean: distclean-recursive |
| 528 | -rm -f Makefile |
| 529 | distclean-am: clean-am distclean-generic distclean-tags |
| 530 | |
| 531 | dvi: dvi-recursive |
| 532 | |
| 533 | dvi-am: |
| 534 | |
| 535 | html: html-recursive |
| 536 | |
| 537 | html-am: |
| 538 | |
| 539 | info: info-recursive |
| 540 | |
| 541 | info-am: |
| 542 | |
| 543 | install-data-am: |
| 544 | |
| 545 | install-dvi: install-dvi-recursive |
| 546 | |
| 547 | install-dvi-am: |
| 548 | |
| 549 | install-exec-am: |
| 550 | |
| 551 | install-html: install-html-recursive |
| 552 | |
| 553 | install-html-am: |
| 554 | |
| 555 | install-info: install-info-recursive |
| 556 | |
| 557 | install-info-am: |
| 558 | |
| 559 | install-man: |
| 560 | |
| 561 | install-pdf: install-pdf-recursive |
| 562 | |
| 563 | install-pdf-am: |
| 564 | |
| 565 | install-ps: install-ps-recursive |
| 566 | |
| 567 | install-ps-am: |
| 568 | |
| 569 | installcheck-am: |
| 570 | |
| 571 | maintainer-clean: maintainer-clean-recursive |
| 572 | -rm -f Makefile |
| 573 | maintainer-clean-am: distclean-am maintainer-clean-generic |
| 574 | |
| 575 | mostlyclean: mostlyclean-recursive |
| 576 | |
| 577 | mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| 578 | |
| 579 | pdf: pdf-recursive |
| 580 | |
| 581 | pdf-am: |
| 582 | |
| 583 | ps: ps-recursive |
| 584 | |
| 585 | ps-am: |
| 586 | |
| 587 | uninstall-am: |
| 588 | |
| 589 | .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ |
| 590 | install-am install-strip tags-recursive |
| 591 | |
| 592 | .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ |
| 593 | all all-am check check-am clean clean-generic clean-libtool \ |
| 594 | ctags ctags-recursive distclean distclean-generic \ |
| 595 | distclean-libtool distclean-tags distdir dvi dvi-am html \ |
| 596 | html-am info info-am install install-am install-data \ |
| 597 | install-data-am install-dvi install-dvi-am install-exec \ |
| 598 | install-exec-am install-html install-html-am install-info \ |
| 599 | install-info-am install-man install-pdf install-pdf-am \ |
| 600 | install-ps install-ps-am install-strip installcheck \ |
| 601 | installcheck-am installdirs installdirs-am maintainer-clean \ |
| 602 | maintainer-clean-generic mostlyclean mostlyclean-generic \ |
| 603 | mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ |
| 604 | uninstall uninstall-am |
| 605 | |
| 606 | |
| 607 | # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| 608 | # Otherwise a system limit (for SysV at least) may be exceeded. |
| 609 | .NOEXPORT: |