//===- MipsInstrInfo.td - Mips Register defs --------------------*- C++ -*-===//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//

//===----------------------------------------------------------------------===//
// Instruction format superclass
//===----------------------------------------------------------------------===//

include "MipsInstrFormats.td"

//===----------------------------------------------------------------------===//
// Mips profiles and nodes
//===----------------------------------------------------------------------===//

// Call
def SDT_MipsJmpLink : SDTypeProfile<0, 1, [SDTCisVT<0, iPTR>]>;
def MipsJmpLink     : SDNode<"MipsISD::JmpLink",SDT_MipsJmpLink, [SDNPHasChain,
                             SDNPOutFlag]>;

// Hi and Lo nodes are used to handle global addresses. Used on 
// MipsISelLowering to lower stuff like GlobalAddress, ExternalSymbol 
// static model. (nothing to do with Mips Registers Hi and Lo)
def MipsHi  : SDNode<"MipsISD::Hi", SDTIntUnaryOp, [SDNPOutFlag]>;
def MipsLo  : SDNode<"MipsISD::Lo", SDTIntUnaryOp>;

// Return
def SDT_MipsRet : SDTypeProfile<0, 1, [SDTCisInt<0>]>;
def MipsRet     : SDNode<"MipsISD::Ret", SDT_MipsRet, [SDNPHasChain,
                             SDNPOptInFlag]>;

// These are target-independent nodes, but have target-specific formats.
def SDT_MipsCallSeqStart : SDCallSeqStart<[SDTCisVT<0, i32>]>;
def SDT_MipsCallSeqEnd   : SDCallSeqEnd<[SDTCisVT<0, i32>,
                                         SDTCisVT<1, i32>]>;

def callseq_start   : SDNode<"ISD::CALLSEQ_START", SDT_MipsCallSeqStart,
                             [SDNPHasChain, SDNPOutFlag]>;
def callseq_end     : SDNode<"ISD::CALLSEQ_END", SDT_MipsCallSeqEnd,
                             [SDNPHasChain, SDNPOptInFlag, SDNPOutFlag]>;

//===----------------------------------------------------------------------===//
// Mips Instruction Predicate Definitions.
//===----------------------------------------------------------------------===//
def IsStatic : Predicate<"TM.getRelocationModel() == Reloc::Static">;

//===----------------------------------------------------------------------===//
// Mips Operand, Complex Patterns and Transformations Definitions.
//===----------------------------------------------------------------------===//

// Instruction operand types
def brtarget    : Operand<OtherVT>;
def calltarget  : Operand<i32>;
def uimm16      : Operand<i32>;
def simm16      : Operand<i32>;
def shamt       : Operand<i32>;
def addrlabel   : Operand<i32>;

// Address operand
def mem : Operand<i32> {
  let PrintMethod = "printMemOperand";
  let MIOperandInfo = (ops simm16, CPURegs);
}

// Transformation Function - get the lower 16 bits.
def LO16 : SDNodeXForm<imm, [{
  return getI32Imm((unsigned)N->getValue() & 0xFFFF);
}]>;

// Transformation Function - get the higher 16 bits.
def HI16 : SDNodeXForm<imm, [{
  return getI32Imm((unsigned)N->getValue() >> 16);
}]>;

// Node immediate fits as 16-bit sign extended on target immediate.
// e.g. addi, andi
def immSExt16  : PatLeaf<(imm), [{
  if (N->getValueType(0) == MVT::i32)
    return (int32_t)N->getValue() == (short)N->getValue();
  else
    return (int64_t)N->getValue() == (short)N->getValue();
}]>;

// Node immediate fits as 16-bit zero extended on target immediate.
// The LO16 param means that only the lower 16 bits of the node
// immediate are caught.
// e.g. addiu, sltiu
def immZExt16  : PatLeaf<(imm), [{
  if (N->getValueType(0) == MVT::i32)
    return (uint32_t)N->getValue() == (unsigned short)N->getValue();
  else
    return (uint64_t)N->getValue() == (unsigned short)N->getValue();
}], LO16>;

// Node immediate fits as 32-bit zero extended on target immediate.
//def immZExt32  : PatLeaf<(imm), [{
//  return (uint64_t)N->getValue() == (uint32_t)N->getValue();
//}], LO16>;

// shamt field must fit in 5 bits.
def immZExt5 : PatLeaf<(imm), [{
  return N->getValue() == ((N->getValue()) & 0x1f) ;
}]>;

// Mips Address Mode! SDNode frameindex could possibily be a match
// since load and store instructions from stack used it.
def addr : ComplexPattern<i32, 2, "SelectAddr", [frameindex], []>;

//===----------------------------------------------------------------------===//
// Instructions specific format
//===----------------------------------------------------------------------===//

// Arithmetic 3 register operands
let isCommutable = 1 in
class ArithR<bits<6> op, bits<6> func, string instr_asm, SDNode OpNode,
             InstrItinClass itin>:
  FR< op,
      func,
      (outs CPURegs:$dst),
      (ins CPURegs:$b, CPURegs:$c),
      !strconcat(instr_asm, " $dst, $b, $c"),
      [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], itin>;

let isCommutable = 1 in
class ArithOverflowR<bits<6> op, bits<6> func, string instr_asm>:
  FR< op,
      func,
      (outs CPURegs:$dst),
      (ins CPURegs:$b, CPURegs:$c),
      !strconcat(instr_asm, " $dst, $b, $c"),
      [], IIAlu>;

// Arithmetic 2 register operands
let isCommutable = 1 in
class ArithI<bits<6> op, string instr_asm, SDNode OpNode,
             Operand Od, PatLeaf imm_type> :
  FI< op,
      (outs CPURegs:$dst),
      (ins CPURegs:$b, Od:$c),
      !strconcat(instr_asm, " $dst, $b, $c"),
      [(set CPURegs:$dst, (OpNode CPURegs:$b, imm_type:$c))], IIAlu>;

// Arithmetic Multiply ADD/SUB
let rd=0 in
class MArithR<bits<6> func, string instr_asm> :
  FR< 0x1c,
      func,
      (outs CPURegs:$rs),
      (ins CPURegs:$rt),
      !strconcat(instr_asm, " $rs, $rt"),
      [], IIImul>;

//  Logical
class LogicR<bits<6> func, string instr_asm, SDNode OpNode>:
  FR< 0x00,
      func,
      (outs CPURegs:$dst),
      (ins CPURegs:$b, CPURegs:$c),
      !strconcat(instr_asm, " $dst, $b, $c"),
      [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], IIAlu>;

class LogicI<bits<6> op, string instr_asm, SDNode OpNode>:
  FI< op,
      (outs CPURegs:$dst),
      (ins CPURegs:$b, uimm16:$c),
      !strconcat(instr_asm, " $dst, $b, $c"),
      [(set CPURegs:$dst, (OpNode CPURegs:$b, immSExt16:$c))], IIAlu>;

class LogicNOR<bits<6> op, bits<6> func, string instr_asm>:
  FR< op,
      func,
      (outs CPURegs:$dst),
      (ins CPURegs:$b, CPURegs:$c),
      !strconcat(instr_asm, " $dst, $b, $c"),
      [(set CPURegs:$dst, (not (or CPURegs:$b, CPURegs:$c)))], IIAlu>;

// Shifts
let rt = 0 in
class LogicR_shift_imm<bits<6> func, string instr_asm, SDNode OpNode>:
  FR< 0x00,
      func,
      (outs CPURegs:$dst),
      (ins CPURegs:$b, shamt:$c),
      !strconcat(instr_asm, " $dst, $b, $c"),
      [(set CPURegs:$dst, (OpNode CPURegs:$b, immZExt5:$c))], IIAlu>;

class LogicR_shift_reg<bits<6> func, string instr_asm, SDNode OpNode>:
  FR< 0x00,
      func,
      (outs CPURegs:$dst),
      (ins CPURegs:$b, CPURegs:$c),
      !strconcat(instr_asm, " $dst, $b, $c"),
      [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], IIAlu>;

// Load Upper Imediate
class LoadUpper<bits<6> op, string instr_asm>:
  FI< op,
      (outs CPURegs:$dst),
      (ins uimm16:$imm),
      !strconcat(instr_asm, " $dst, $imm"),
      [], IIAlu>;

// Memory Load/Store
let isLoad = 1, hasDelaySlot = 1 in
class LoadM<bits<6> op, string instr_asm, PatFrag OpNode>:
  FI< op,
      (outs CPURegs:$dst),
      (ins mem:$addr),
      !strconcat(instr_asm, " $dst, $addr"),
      [(set CPURegs:$dst, (OpNode addr:$addr))], IILoad>;

let isStore = 1 in
class StoreM<bits<6> op, string instr_asm, PatFrag OpNode>:
  FI< op,
      (outs),
      (ins CPURegs:$dst, mem:$addr),
      !strconcat(instr_asm, " $dst, $addr"),
      [(OpNode CPURegs:$dst, addr:$addr)], IIStore>;

// Conditional Branch
let isBranch = 1, isTerminator=1, hasDelaySlot = 1 in {
class CBranch<bits<6> op, string instr_asm, PatFrag cond_op>:
  FI< op,
      (outs),
      (ins CPURegs:$a, CPURegs:$b, brtarget:$offset),
      !strconcat(instr_asm, " $a, $b, $offset"),
      [(brcond (cond_op CPURegs:$a, CPURegs:$b), bb:$offset)],
      IIBranch>;


class CBranchZero<bits<6> op, string instr_asm, PatFrag cond_op>:
  FI< op,
      (outs),
      (ins CPURegs:$src, brtarget:$offset),
      !strconcat(instr_asm, " $src, $offset"),
      [(brcond (cond_op CPURegs:$src, 0), bb:$offset)],
      IIBranch>;
}

// SetCC
class SetCC_R<bits<6> op, bits<6> func, string instr_asm,
      PatFrag cond_op>:
  FR< op,
      func,
      (outs CPURegs:$dst),
      (ins CPURegs:$b, CPURegs:$c),
      !strconcat(instr_asm, " $dst, $b, $c"),
      [(set CPURegs:$dst, (cond_op CPURegs:$b, CPURegs:$c))],
      IIAlu>;

class SetCC_I<bits<6> op, string instr_asm, PatFrag cond_op,
      Operand Od, PatLeaf imm_type>:
  FI< op,
      (outs CPURegs:$dst),
      (ins CPURegs:$b, Od:$c),
      !strconcat(instr_asm, " $dst, $b, $c"),
      [(set CPURegs:$dst, (cond_op CPURegs:$b, imm_type:$c))],
      IIAlu>;

// Unconditional branch
let isBranch=1, isTerminator=1, isBarrier=1, hasDelaySlot = 1 in
class JumpFJ<bits<6> op, string instr_asm>:
  FJ< op,
      (outs),
      (ins brtarget:$target),
      !strconcat(instr_asm, " $target"),
      [(br bb:$target)], IIBranch>;

let isBranch=1, isTerminator=1, isBarrier=1, rd=0, hasDelaySlot = 1 in
class JumpFR<bits<6> op, bits<6> func, string instr_asm>:
  FR< op,
      func,
      (outs),
      (ins CPURegs:$target),
      !strconcat(instr_asm, " $target"),
      [(brind CPURegs:$target)], IIBranch>;

// Jump and Link (Call)
let isCall=1, hasDelaySlot=1,
  // All calls clobber the non-callee saved registers...
  Defs = [AT, V0, V1, A0, A1, A2, A3, T0, T1, T2,
          T3, T4, T5, T6, T7, T8, T9, K0, K1], Uses = [GP] in {
  class JumpLink<bits<6> op, string instr_asm>:
    FJ< op,
        (outs),
        (ins calltarget:$target),
        !strconcat(instr_asm, " $target"),
        [(MipsJmpLink imm:$target)], IIBranch>;

  let rd=31 in
  class JumpLinkReg<bits<6> op, bits<6> func, string instr_asm>:
    FR< op,
        func,
        (outs),
        (ins CPURegs:$rs),
        !strconcat(instr_asm, " $rs"),
        [(MipsJmpLink CPURegs:$rs)], IIBranch>;

  class BranchLink<string instr_asm>:
    FI< 0x1,
        (outs),
        (ins CPURegs:$rs, brtarget:$target),
        !strconcat(instr_asm, " $rs, $target"),
        [], IIBranch>;
}

// Mul, Div
class MulDiv<bits<6> func, string instr_asm, InstrItinClass itin>:
  FR< 0x00,
      func,
      (outs),
      (ins CPURegs:$a, CPURegs:$b),
      !strconcat(instr_asm, " $a, $b"),
      [], itin>;

// Move from Hi/Lo
class MoveFromTo<bits<6> func, string instr_asm>:
  FR< 0x00,
      func,
      (outs CPURegs:$dst),
      (ins),
      !strconcat(instr_asm, " $dst"),
      [], IIHiLo>;

// Count Leading Ones/Zeros in Word
class CountLeading<bits<6> func, string instr_asm>:
  FR< 0x1c,
      func,
      (outs CPURegs:$dst),
      (ins CPURegs:$src),
      !strconcat(instr_asm, " $dst, $src"),
      [], IIAlu>;

class EffectiveAddress<string instr_asm> :
  FI<0x09,
     (outs CPURegs:$dst),
     (ins mem:$addr),
     instr_asm,
     [(set CPURegs:$dst, addr:$addr)], IIAlu>;

//===----------------------------------------------------------------------===//
// Pseudo instructions
//===----------------------------------------------------------------------===//

// As stack alignment is always done with addiu, we need a 16-bit immediate
let Defs = [SP], Uses = [SP] in {
def ADJCALLSTACKDOWN : PseudoInstMips<(outs), (ins uimm16:$amt),
                                      "!ADJCALLSTACKDOWN $amt",
                                      [(callseq_start imm:$amt)]>;
def ADJCALLSTACKUP   : PseudoInstMips<(outs), (ins uimm16:$amt1, uimm16:$amt2),
                                      "!ADJCALLSTACKUP $amt1",
                                      [(callseq_end imm:$amt1, imm:$amt2)]>;
}

let isImplicitDef = 1 in
def IMPLICIT_DEF_CPURegs : PseudoInstMips<(outs CPURegs:$dst), (ins),
                                          "!IMPLICIT_DEF $dst",
                                          [(set CPURegs:$dst, (undef))]>;

// When handling PIC code the assembler needs .cpload and .cprestore
// directives. If the real instructions corresponding these directives
// are used, we have the same behavior, but get also a bunch of warnings
// from the assembler.
def CPLOAD: PseudoInstMips<(outs), (ins CPURegs:$reg),
                          ".set noreorder\n\t.cpload $reg\n\t.set reorder\n", []>;
def CPRESTORE: PseudoInstMips<(outs), (ins uimm16:$loc),
                              ".cprestore $loc\n", []>;

//===----------------------------------------------------------------------===//
// Instruction definition
//===----------------------------------------------------------------------===//

//===----------------------------------------------------------------------===//
// MipsI Instructions
//===----------------------------------------------------------------------===//

// Arithmetic

// ADDiu just accept 16-bit immediates but we handle this on Pat's.
// immZExt32 is used here so it can match GlobalAddress immediates.
def ADDiu   : ArithI<0x09, "addiu", add, uimm16, immZExt16>;
def ADDi    : ArithI<0x08, "addi",  add, simm16, immSExt16>;
def MUL     : ArithR<0x1c, 0x02, "mul", mul, IIImul>;
def ADDu    : ArithR<0x00, 0x21, "addu", add, IIAlu>;
def SUBu    : ArithR<0x00, 0x23, "subu", sub, IIAlu>;
def ADD     : ArithOverflowR<0x00, 0x20, "add">;
def SUB     : ArithOverflowR<0x00, 0x22, "sub">;

// Logical
def AND     : LogicR<0x24, "and", and>;
def OR      : LogicR<0x25, "or",  or>;
def XOR     : LogicR<0x26, "xor", xor>;
def ANDi    : LogicI<0x0c, "andi", and>;
def ORi     : LogicI<0x0d, "ori",  or>;
def XORi    : LogicI<0x0e, "xori",  xor>;
def NOR     : LogicNOR<0x00, 0x27, "nor">;

// Shifts
def SLL     : LogicR_shift_imm<0x00, "sll", shl>;
def SRL     : LogicR_shift_imm<0x02, "srl", srl>;
def SRA     : LogicR_shift_imm<0x03, "sra", sra>;
def SLLV    : LogicR_shift_reg<0x04, "sllv", shl>;
def SRLV    : LogicR_shift_reg<0x06, "srlv", srl>;
def SRAV    : LogicR_shift_reg<0x07, "srav", sra>;

// Load Upper Immediate
def LUi     : LoadUpper<0x0f, "lui">;

// Load/Store
def LB      : LoadM<0x20, "lb",  sextloadi8>;
def LBu     : LoadM<0x24, "lbu", zextloadi8>;
def LH      : LoadM<0x21, "lh",  sextloadi16>;
def LHu     : LoadM<0x25, "lhu", zextloadi16>;
def LW      : LoadM<0x23, "lw",  load>;
def SB      : StoreM<0x28, "sb", truncstorei8>;
def SH      : StoreM<0x29, "sh", truncstorei16>;
def SW      : StoreM<0x2b, "sw", store>;

// Conditional Branch
def BEQ     : CBranch<0x04, "beq", seteq>;
def BNE     : CBranch<0x05, "bne", setne>;

let rt=1 in
def BGEZ    : CBranchZero<0x01, "bgez", setge>;

let rt=0 in {
def BGTZ    : CBranchZero<0x07, "bgtz", setgt>;
def BLEZ    : CBranchZero<0x07, "blez", setle>;
def BLTZ    : CBranchZero<0x01, "bltz", setlt>;
}

// Set Condition Code
def SLT     : SetCC_R<0x00, 0x2a, "slt", setlt>;
def SLTu    : SetCC_R<0x00, 0x2b, "sltu", setult>;
def SLTi    : SetCC_I<0x0a, "slti", setlt, simm16, immSExt16>;
def SLTiu   : SetCC_I<0x0b, "sltiu", setult, uimm16, immZExt16>;

// Unconditional jump
def J       : JumpFJ<0x02, "j">;
def JR      : JumpFR<0x00, 0x08, "jr">;

// Jump and Link (Call)
def JAL     : JumpLink<0x03, "jal">;
def JALR    : JumpLinkReg<0x00, 0x09, "jalr">;
def BGEZAL  : BranchLink<"bgezal">;
def BLTZAL  : BranchLink<"bltzal">;

// MulDiv and Move From Hi/Lo operations, have
// their correpondent SDNodes created on ISelDAG.
// Special Mul, Div operations
def MULT    : MulDiv<0x18, "mult", IIImul>;
def MULTu   : MulDiv<0x19, "multu", IIImul>;
def DIV     : MulDiv<0x1a, "div", IIIdiv>;
def DIVu    : MulDiv<0x1b, "divu", IIIdiv>;

// Move From Hi/Lo
def MFHI    : MoveFromTo<0x10, "mfhi">;
def MFLO    : MoveFromTo<0x12, "mflo">;
def MTHI    : MoveFromTo<0x11, "mthi">;
def MTLO    : MoveFromTo<0x13, "mtlo">;

// Count Leading
// CLO/CLZ are part of the newer MIPS32(tm) instruction
// set and not older Mips I keep this for future use
// though. 
//def CLO     : CountLeading<0x21, "clo">;
//def CLZ     : CountLeading<0x20, "clz">;

// MADD*/MSUB* are not part of MipsI either.
//def MADD    : MArithR<0x00, "madd">;
//def MADDU   : MArithR<0x01, "maddu">;
//def MSUB    : MArithR<0x04, "msub">;
//def MSUBU   : MArithR<0x05, "msubu">;

// No operation
let addr=0 in
def NOP     : FJ<0, (outs), (ins), "nop", [], IIAlu>;

// Ret instruction - as mips does not have "ret" a
// jr $ra must be generated.
let isReturn=1, isTerminator=1, hasDelaySlot=1,
    isBarrier=1, hasCtrlDep=1, rs=0, rt=0, shamt=0 in
{
  def RET : FR <0x00, 0x02, (outs), (ins CPURegs:$target),
                "jr $target", [(MipsRet CPURegs:$target)], IIBranch>;
}

// FrameIndexes are legalized when they are operands from load/store
// instructions. The same not happens for stack address copies, so an
// add op with mem ComplexPattern is used and the stack address copy
// can be matched. It's similar to Sparc LEA_ADDRi
def LEA_ADDiu : EffectiveAddress<"addiu $dst, ${addr:stackloc}">;

//===----------------------------------------------------------------------===//
//  Arbitrary patterns that map to one or more instructions
//===----------------------------------------------------------------------===//

// Small immediates
def : Pat<(i32 immSExt16:$in),
          (ADDiu ZERO, imm:$in)>;
def : Pat<(i32 immZExt16:$in),
          (ORi ZERO, imm:$in)>;

// Arbitrary immediates
def : Pat<(i32 imm:$imm),
          (ORi (LUi (HI16 imm:$imm)), (LO16 imm:$imm))>;

// Call
def : Pat<(MipsJmpLink (i32 tglobaladdr:$dst)),
          (JAL tglobaladdr:$dst)>;
def : Pat<(MipsJmpLink (i32 texternalsym:$dst)),
          (JAL texternalsym:$dst)>;
def : Pat<(MipsJmpLink CPURegs:$dst),
          (JALR CPURegs:$dst)>;

// GlobalAddress, Constant Pool, ExternalSymbol, and JumpTable
def : Pat<(MipsHi tglobaladdr:$in), (LUi tglobaladdr:$in)>;
def : Pat<(MipsLo tglobaladdr:$in), (ADDiu ZERO, tglobaladdr:$in)>;
def : Pat<(add CPURegs:$hi, (MipsLo tglobaladdr:$lo)),
          (ADDiu CPURegs:$hi, tglobaladdr:$lo)>;
def : Pat<(MipsHi tjumptable:$in), (LUi tjumptable:$in)>;
def : Pat<(MipsLo tjumptable:$in), (ADDiu ZERO, tjumptable:$in)>;
def : Pat<(add CPURegs:$hi, (MipsLo tjumptable:$lo)),
          (ADDiu CPURegs:$hi, tjumptable:$lo)>;

// Mips does not have not, so we increase the operation
def : Pat<(not CPURegs:$in),
          (NOR CPURegs:$in, ZERO)>;

// extended load and stores
def : Pat<(i32 (extloadi1  addr:$src)), (LBu addr:$src)>;
def : Pat<(i32 (extloadi8  addr:$src)), (LBu addr:$src)>;
def : Pat<(i32 (extloadi16 addr:$src)), (LHu addr:$src)>;
def : Pat<(truncstorei1 CPURegs:$src, addr:$addr),
           (SB CPURegs:$src, addr:$addr)>;

// some peepholes
def : Pat<(store (i32 0), addr:$dst), (SW ZERO, addr:$dst)>;

///
/// brcond patterns
///

// direct match equal/notequal zero branches
def : Pat<(brcond (setne CPURegs:$lhs, 0), bb:$dst),
          (BNE CPURegs:$lhs, ZERO, bb:$dst)>;
def : Pat<(brcond (seteq CPURegs:$lhs, 0), bb:$dst),
          (BEQ CPURegs:$lhs, ZERO, bb:$dst)>;

def : Pat<(brcond (setge CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
          (BGEZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
def : Pat<(brcond (setuge CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
          (BGEZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;

def : Pat<(brcond (setgt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
          (BGTZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
def : Pat<(brcond (setugt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
          (BGTZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;

def : Pat<(brcond (setle CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
          (BLEZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
def : Pat<(brcond (setule CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
          (BLEZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;

def : Pat<(brcond (setlt CPURegs:$lhs, immSExt16:$rhs), bb:$dst),
          (BNE (SLTi CPURegs:$lhs, immSExt16:$rhs), ZERO, bb:$dst)>;
def : Pat<(brcond (setult CPURegs:$lhs, immZExt16:$rhs), bb:$dst),
          (BNE (SLTiu CPURegs:$lhs, immZExt16:$rhs), ZERO, bb:$dst)>;
def : Pat<(brcond (setlt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
          (BNE (SLT CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;
def : Pat<(brcond (setult CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
          (BNE (SLTu CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;

def : Pat<(brcond (setlt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
          (BLTZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
def : Pat<(brcond (setult CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
          (BLTZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;

// generic brcond pattern
def : Pat<(brcond CPURegs:$cond, bb:$dst),
          (BNE CPURegs:$cond, ZERO, bb:$dst)>;

///
/// setcc patterns, only matched when there
/// is no brcond following a setcc operation
///

// setcc 2 register operands
def : Pat<(setle CPURegs:$lhs, CPURegs:$rhs),
          (XORi (SLT CPURegs:$rhs, CPURegs:$lhs), 1)>;
def : Pat<(setule CPURegs:$lhs, CPURegs:$rhs),
          (XORi (SLTu CPURegs:$rhs, CPURegs:$lhs), 1)>;

def : Pat<(setgt CPURegs:$lhs, CPURegs:$rhs),
          (SLT CPURegs:$rhs, CPURegs:$lhs)>;
def : Pat<(setugt CPURegs:$lhs, CPURegs:$rhs),
          (SLTu CPURegs:$rhs, CPURegs:$lhs)>;

def : Pat<(setge CPURegs:$lhs, CPURegs:$rhs),
          (XORi (SLT CPURegs:$lhs, CPURegs:$rhs), 1)>;
def : Pat<(setuge CPURegs:$lhs, CPURegs:$rhs),
          (XORi (SLTu CPURegs:$lhs, CPURegs:$rhs), 1)>;

def : Pat<(setne CPURegs:$lhs, CPURegs:$rhs),
          (OR (SLT CPURegs:$lhs, CPURegs:$rhs),
              (SLT CPURegs:$rhs, CPURegs:$lhs))>;

def : Pat<(seteq CPURegs:$lhs, CPURegs:$rhs),
          (XORi (OR (SLT CPURegs:$lhs, CPURegs:$rhs),
                    (SLT CPURegs:$rhs, CPURegs:$lhs)), 1)>;

// setcc reg/imm operands
def : Pat<(setge CPURegs:$lhs, immSExt16:$rhs),
          (XORi (SLTi CPURegs:$lhs, immSExt16:$rhs), 1)>;
def : Pat<(setuge CPURegs:$lhs, immZExt16:$rhs),
          (XORi (SLTiu CPURegs:$lhs, immZExt16:$rhs), 1)>;