| # Makefile.in generated by automake 1.9.2 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| #===-- runtime/GC/Makefile.am ------------------------------*- Makefile -*--===# |
| # |
| # The LLVM Compiler Infrastructure |
| # |
| # This file was developed by Reid Spencer and is distributed under the |
| # University of Illinois Open Source License. See LICENSE.TXT for details. |
| # |
| #===------------------------------------------------------------------------===# |
| |
| #,===-- Makefile.rules.am - Common make rules for LLVM ------*- Makefile -*--===# |
| # |
| # The LLVM Compiler Infrastructure |
| # |
| # This file was developed by Reid Spencer and is distributed under the |
| # University of Illinois Open Source License. See LICENSE.TXT for details. |
| # |
| #===------------------------------------------------------------------------===# |
| srcdir = @srcdir@ |
| top_srcdir = @top_srcdir@ |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| top_builddir = ../.. |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ |
| $(top_srcdir)/Makefile_config |
| subdir = runtime/GC |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(SHELL) $(top_srcdir)/autoconf/mkinstalldirs |
| CONFIG_HEADER = $(top_builddir)/include/llvm/Config/config.h \ |
| $(top_builddir)/include/llvm/Support/DataTypes.h \ |
| $(top_builddir)/include/llvm/ADT/hash_map \ |
| $(top_builddir)/include/llvm/ADT/hash_set \ |
| $(top_builddir)/include/llvm/Support/ThreadSupport.h \ |
| $(top_builddir)/include/llvm/ADT/iterator |
| CONFIG_CLEAN_FILES = |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-exec-recursive install-info-recursive \ |
| install-recursive installcheck-recursive installdirs-recursive \ |
| pdf-recursive ps-recursive uninstall-info-recursive \ |
| uninstall-recursive |
| CTAGS = ctags |
| DEJATOOL = $(PACKAGE) |
| RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir |
| EXPECT = expect |
| RUNTEST = runtest |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| INSTALL = @INSTALL@ |
| ACLOCAL = @ACLOCAL@ |
| ALLOCA = @ALLOCA@ |
| AMDEP_FALSE = @AMDEP_FALSE@ |
| AMDEP_TRUE = @AMDEP_TRUE@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| |
| # Target hardware architecture |
| ARCH = @ARCH@ |
| ARCH_PPC_FALSE = @ARCH_PPC_FALSE@ |
| ARCH_PPC_TRUE = @ARCH_PPC_TRUE@ |
| ARCH_SPARC_FALSE = @ARCH_SPARC_FALSE@ |
| ARCH_SPARC_TRUE = @ARCH_SPARC_TRUE@ |
| ARCH_UNKNOWN_FALSE = @ARCH_UNKNOWN_FALSE@ |
| ARCH_UNKNOWN_TRUE = @ARCH_UNKNOWN_TRUE@ |
| ARCH_X86_FALSE = @ARCH_X86_FALSE@ |
| ARCH_X86_TRUE = @ARCH_X86_TRUE@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BISON = @BISON@ |
| BUILDMODE := @BUILDMODE@ |
| |
| # Path to the CC binary, which use used by testcases for native builds. |
| CC := @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| |
| # Path to the C++ compiler to use. This is an optional setting, which defaults |
| # to whatever your gmake defaults to. |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DOT = @DOT@ |
| ECHO = echo |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| ENABLE_OPTIMIZED = @ENABLE_OPTIMIZED@ |
| ENABLE_PROFILED = @ENABLE_PROFILED@ |
| |
| # Endian-ness of the target |
| ENDIAN = @ENDIAN@ |
| ETAGS = @ETAGS@ |
| ETAGSFLAGS = @ETAGSFLAGS@ |
| |
| # Executable file extension for this platform. |
| EXEEXT = @EXEEXT@ |
| F77 = @F77@ |
| FFLAGS = @FFLAGS@ |
| FLEX = @LEX@ |
| HAVE_BZIP2 = @HAVE_BZIP2@ |
| HAVE_ZLIB = @HAVE_ZLIB@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| JIT = @JIT@ |
| |
| # Linker flags. |
| LDFLAGS = @LDFLAGS@ @LDFLAGS@ |
| LEX = @LEX@ |
| LEXLIB = @LEXLIB@ |
| LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LLVMCC1 = @LLVMCC1@ |
| LLVMCC1PLUS = @LLVMCC1PLUS@ |
| |
| # Path to location for LLVM C/C++ front-end. You can modify this if you |
| # want to override the value set by configure. |
| LLVMGCCDIR := @LLVMGCCDIR@ |
| LLVM_BINDIR := @LLVM_BINDIR@ |
| LLVM_CONFIGTIME = @LLVM_CONFIGTIME@ |
| LLVM_DATADIR := @LLVM_DATADIR@ |
| LLVM_DOCSDIR := @LLVM_DOCSDIR@ |
| LLVM_ETCDIR := @LLVM_ETCDIR@ |
| LLVM_INCLUDEDIR := @LLVM_INCLUDEDIR@ |
| LLVM_INFODIR := @LLVM_INFODIR@ |
| LLVM_LIBDIR := @LLVM_LIBDIR@ |
| LLVM_MANDIR := @LLVM_MANDIR@ |
| |
| # Autoconf configured values |
| LLVM_PREFIX := @LLVM_PREFIX@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAKEINFO = @MAKEINFO@ |
| MMAP_FILE = @MMAP_FILE@ |
| OBJEXT = @OBJEXT@ |
| |
| # Target operating system for which LLVM will be compiled. |
| OS = @OS@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| |
| # Path to the Python interpreter |
| PYTHON := @PYTHON@ |
| QMTEST = @QMTEST@ |
| RANLIB = @RANLIB@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| |
| # Shared library extension for this platform. |
| SHLIBEXT = @SHLIBEXT@ |
| STRIP = @STRIP@ |
| VERSION = @VERSION@ |
| |
| # The pathnames of the Flex and Bison programs, respectively. |
| YACC = @YACC@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_F77 = @ac_ct_F77@ |
| ac_ct_RANLIB = @ac_ct_RANLIB@ |
| ac_ct_STRIP = @ac_ct_STRIP@ |
| am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ |
| am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ |
| am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ |
| am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| datadir = @datadir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| ifGNUmake = @ifGNUmake@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| subdirs = @subdirs@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| SUBDIRS = SemiSpace |
| EXTRA_DIST = gc_exported_symbols.lst GCInterface.h |
| |
| # Options for all automake makefiles |
| ACLOCAL_AMFLAGS = -I autoconf -I autoconf/m4 --output=autoconf/aclocal.m4 |
| AUTOMAKE_OPTIONS = foreign dejagnu dist-zip nostdinc |
| |
| # Libraries needed by tools |
| TOOLLINKOPTS = @LIBS@ |
| |
| # Path to the library archiver program. |
| AR_PATH = @AR@ |
| |
| # Paths to miscellaneous programs. |
| RPWD = pwd |
| SED = sed |
| RM = rm |
| CP = cp |
| LN = ln |
| CMP = cmp |
| MKDIR = @abs_top_srcdir@/autoconf/mkinstalldirs |
| DATE = date |
| MV = mv |
| VERB := @ |
| IGNORE := true |
| |
| # Determine the target for which LLVM should generate code. |
| LLVMGCCARCH := @target@/3.4-llvm |
| |
| # Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries: |
| LCC1 = @LLVMCC1@ |
| LCC1XX = @LLVMCC1PLUS@ |
| |
| # Path to directory where object files should be stored during a build. |
| # Set OBJ_ROOT to "." if you do not want to use a separate place for |
| # object files. |
| OBJ_ROOT := . |
| all: all-recursive |
| |
| .SUFFIXES: |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/Makefile_config $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign runtime/GC/Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign runtime/GC/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool |
| uninstall-info-am: |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @set fnord $$MAKEFLAGS; amf=$$2; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| mostlyclean-recursive clean-recursive distclean-recursive \ |
| maintainer-clean-recursive: |
| @set fnord $$MAKEFLAGS; amf=$$2; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| check-DEJAGNU: site.exp |
| srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \ |
| EXPECT=$(EXPECT); export EXPECT; \ |
| runtest=$(RUNTEST); \ |
| if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ |
| l='$(DEJATOOL)'; for tool in $$l; do \ |
| $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \ |
| done; \ |
| else echo "WARNING: could not find \`runtest'" 1>&2; :;\ |
| fi |
| site.exp: Makefile |
| @echo 'Making a new site.exp file...' |
| @echo '## these variables are automatically generated by make ##' >site.tmp |
| @echo '# Do not edit here. If you wish to override these values' >>site.tmp |
| @echo '# edit the last section' >>site.tmp |
| @echo 'set srcdir $(srcdir)' >>site.tmp |
| @echo "set objdir `pwd`" >>site.tmp |
| @echo 'set build_alias "$(build_alias)"' >>site.tmp |
| @echo 'set build_triplet $(build_triplet)' >>site.tmp |
| @echo 'set host_alias "$(host_alias)"' >>site.tmp |
| @echo 'set host_triplet $(host_triplet)' >>site.tmp |
| @echo 'set target_alias "$(target_alias)"' >>site.tmp |
| @echo 'set target_triplet $(target_triplet)' >>site.tmp |
| @echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp |
| @test ! -f site.exp || \ |
| sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp |
| @-rm -f site.bak |
| @test ! -f site.exp || mv site.exp site.bak |
| @mv site.tmp site.exp |
| |
| distclean-DEJAGNU: |
| -rm -f site.exp site.bak |
| -l='$(DEJATOOL)'; for tool in $$l; do \ |
| rm -f $$tool.sum $$tool.log; \ |
| done |
| |
| distdir: $(DISTFILES) |
| $(mkdir_p) $(distdir)/../.. |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ |
| list='$(DISTFILES)'; for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ |
| esac; \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
| dir="/$$dir"; \ |
| $(mkdir_p) "$(distdir)$$dir"; \ |
| else \ |
| dir=''; \ |
| fi; \ |
| if test -d $$d/$$file; then \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d "$(distdir)/$$subdir" \ |
| || $(mkdir_p) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| distdir=`$(am__cd) $(distdir) && pwd`; \ |
| top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ |
| (cd $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$top_distdir" \ |
| distdir="$$distdir/$$subdir" \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| check-am: all-am |
| $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU |
| check: check-recursive |
| all-am: Makefile |
| installdirs: installdirs-recursive |
| installdirs-am: |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f Makefile |
| distclean-am: clean-am distclean-DEJAGNU distclean-generic \ |
| distclean-libtool distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: |
| |
| install-exec-am: |
| |
| install-info: install-info-recursive |
| |
| install-man: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-info-am |
| |
| uninstall-info: uninstall-info-recursive |
| |
| .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check \ |
| check-DEJAGNU check-am clean clean-generic clean-libtool \ |
| clean-recursive ctags ctags-recursive distclean \ |
| distclean-DEJAGNU distclean-generic distclean-libtool \ |
| distclean-recursive distclean-tags distdir dvi dvi-am html \ |
| html-am info info-am install install-am install-data \ |
| install-data-am install-exec install-exec-am install-info \ |
| install-info-am install-man install-strip installcheck \ |
| installcheck-am installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-generic maintainer-clean-recursive \ |
| mostlyclean mostlyclean-generic mostlyclean-libtool \ |
| mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ |
| uninstall uninstall-am uninstall-info-am |
| |
| |
| # These are options that can either be enabled here, or can be enabled on the |
| # make command line (ie, make ENABLE_PROFILING=1): |
| |
| # When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are |
| # turned on, and Debug builds are turned off. |
| #ENABLE_OPTIMIZED = 1 |
| |
| # When ENABLE_PROFILING is enabled, the llvm source base is built with profile |
| # information to allow gprof to be used to get execution frequencies. |
| #ENABLE_PROFILING = 1 |
| |
| # This option tells the Makefiles to produce verbose output. |
| # It essentially prints the commands that make is executing |
| #VERBOSE = 1 |
| |
| # Include the rules. |
| # WARNING NOTE WARNING NOTE WARNING NOTE WARNING NOTE |
| # The inclusion of Makefile_rules MUST be done such that there is a space |
| # before "include". This prevents automake from processing the file and |
| # simply passes the inclusion on to GNU Make. The rules in Makefile_rules |
| # depend on this. DO NOT REMOVE THE SPACE BEFORE "include" |
| include $(top_srcdir)/Makefile_rules |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |