| dnl -- configure.am - Automake based configuration --------------------------=== |
| dnl |
| dnl The LLVM Compiler Infrastructure |
| dnl |
| dnl This file was developed by Reid Spencer and is distributed under the |
| dnl University of Illinois Open Source License. See LICENSE.TXT for details. |
| dnl |
| dnl ===----------------------------------------------------------------------=== |
| dnl |
| |
| dnl ===----------------------------------------------------------------------=== |
| dnl -- |
| dnl -- SECTION 1: Initialization & Setup |
| dnl -- |
| dnl ===----------------------------------------------------------------------=== |
| |
| dnl Initialize autoconf |
| AC_INIT([[LLVM]],[[1.4]],[llvmbugs@cs.uiuc.edu]) |
| |
| dnl Place all of the extra autoconf files into the config subdirectory |
| dnl Tell various tools where the m4 autoconf macros are |
| dnl Have configure verify that the source directory is valid. |
| AC_CONFIG_AUX_DIR([autoconf]) |
| |
| dnl AC_CONFIG_MACRO_DIR(autoconf/m4) |
| dnl Verify that the source directory is valid |
| AC_CONFIG_SRCDIR(["lib/VMCore/Module.cpp"]) |
| |
| dnl Check which host/target for which we're compiling. This will tell us which |
| dnl LLVM compiler will be used for compiling SSA into object code. |
| AC_CANONICAL_TARGET |
| |
| dnl Quit if the source directory has already been configured. |
| dnl NOTE: This relies upon undocumented autoconf behavior. |
| if test ${srcdir} != "." ; then |
| if test -f ${srcdir}/include/llvm/Config/config.h ; then |
| AC_MSG_ERROR([Already configured in ${srcdir}]) |
| fi |
| fi |
| |
| dnl Initialize automake |
| AM_INIT_AUTOMAKE([foreign dejagnu dist-zip nostdinc -Wnone -Wunsupported -Wsyntax -Wobsolete]) |
| |
| dnl Make sure we are using the right version of autoconf |
| AC_PREREQ(2.59) |
| |
| dnl ===----------------------------------------------------------------------=== |
| dnl -- |
| dnl -- SECTION 2: Setup The Command Line Arguments For "configure" |
| dnl -- |
| dnl ===----------------------------------------------------------------------=== |
| |
| dnl Specify where to find the llvm-gcc install directory |
| AC_ARG_WITH(llvmgccdir, |
| AS_HELP_STRING([--with-llvmgccdir],[Location of LLVM GCC front-end]), |
| [case "${withval}" in |
| /*|*/*) LLVMGCCDIR=$withval ;; |
| *) AC_MSG_ERROR([bad value ${withval} for --with-llvmgccdir]) ;; |
| esac], |
| [LLVMGCCDIR=/usr/local/llvm-gcc]) |
| AC_SUBST(LLVMGCCDIR) |
| |
| dnl Specify whether to build optimized or not |
| AC_ARG_ENABLE(optimized, |
| AS_HELP_STRING([--enable-optimized],[Build an optimized version of LLVM |
| (default=no)]), |
| [case "${withval}" in |
| yes) ENABLE_OPTIMIZED=1 ;; |
| no) ENABLE_OPTIMIZED=0 ;; |
| "") ENABLE_OPTIMIZED=0 ;; |
| *) AC_MSG_ERROR([bad value ${withval} for --enable-optimized]) ;; |
| esac], |
| [ENABLE_OPTIMIZED=0]) |
| AC_SUBST(ENABLE_OPTIMIZED) |
| |
| dnl Specify whether to build profiled or not |
| AC_ARG_ENABLE(profiled, |
| AS_HELP_STRING([--enable-profiled],[Build a profiled version of LLVM |
| (default=no)]), |
| [case "${withval}" in |
| yes) ENABLE_PROFILED=1 ;; |
| no) ENABLE_PROFILED=0 ;; |
| "") ENABLE_PROFILED=0 ;; |
| *) AC_MSG_ERROR([bad value ${withval} for --enable-profiled]) ;; |
| esac], |
| [ENABLE_PROFILED=0]) |
| AC_SUBST(ENABLE_PROFILED,$ENABLE_PROFILED) |
| |
| if test $ENABLE_PROFILED = 1 ; then |
| AC_SUBST(BUILDMODE,Profile) |
| else |
| if test $ENABLE_OPTIMIZED = 1 ; then |
| AC_SUBST(BUILDMODE,Release) |
| else |
| AC_SUBST(BUILDMODE,Debug) |
| fi |
| fi |
| |
| dnl JIT Option |
| AC_ARG_ENABLE(jit, |
| AS_HELP_STRING([--enable-jit], |
| [Enable Just In Time Compiling (default is YES)]),, |
| enableval=default) |
| |
| if test ${enableval} = "no" |
| then |
| AC_SUBST(JIT,[[]]) |
| else |
| case $target in |
| *i*86*) AC_SUBST(JIT,[[TARGET_HAS_JIT=1]]) ;; |
| *sparc*) AC_SUBST(JIT,[[TARGET_HAS_JIT=1]]) ;; |
| *) AC_SUBST(JIT,[[]]) ;; |
| esac |
| fi |
| |
| dnl ===----------------------------------------------------------------------=== |
| dnl -- |
| dnl -- SECTION 3: Platform/Architecture Configuration |
| dnl -- |
| dnl ===----------------------------------------------------------------------=== |
| |
| dnl Set the "OS" Makefile variable based on the system we are building on. |
| AC_MSG_CHECKING([support for generic build operating system]) |
| case $build in |
| *-*-aix*) llvm_platform_type="AIX" ;; |
| *-*-cygwin*) llvm_platform_type="Cygwin" ;; |
| *-*-darwin*) llvm_platform_type="Darwin" ;; |
| *-*-freebsd*) llvm_platform_type="FreeBSD" ;; |
| *-*-interix*) llvm_platform_type="Interix" ;; |
| *-*-linux*) llvm_platform_type="Linux" ;; |
| *-*-solaris*) llvm_platform_type="SunOS" ;; |
| *-*-win32*) llvm_platform_type="Win32" ;; |
| *-*-mingw*) llvm_platform_type="Win32" ;; |
| *) |
| AC_MSG_ERROR([Platform is unknown, configure can't continue]) |
| llvm_platform_type="Unknown" |
| ;; |
| esac |
| AC_SUBST(OS,$llvm_platform_type) |
| AC_MSG_RESULT($llvm_platform_type) |
| |
| AC_MSG_CHECKING(target architecture) |
| dnl If we are targetting a Sparc machine running Solaris, pretend that it is |
| dnl V9, since that is all that we support at the moment, and autoconf will only |
| dnl tell us we're a sparc. |
| case $target in |
| sparc*-*-solaris*) AC_SUBST(target,[[sparcv9-sun-solaris2.8]]) ;; |
| esac |
| |
| dnl Determine what our target architecture is and configure accordingly. |
| dnl This will allow Makefiles to make a distinction between the hardware and |
| dnl the OS. |
| case $target in |
| i*86-*) ARCH="x86" ;; |
| sparc*-*) ARCH="Sparc" ;; |
| powerpc*-*) ARCH="PowerPC" ;; |
| *) ARCH="Unknown";; |
| esac |
| AM_CONDITIONAL(ARCH_X86,test $ARCH = "x86") |
| AM_CONDITIONAL(ARCH_SPARC,test $ARCH = "Sparc") |
| AM_CONDITIONAL(ARCH_PPC,test $ARCH = "PowerPC") |
| AM_CONDITIONAL(ARCH_UNKNOWN,test $ARCH = "Unknown") |
| AC_SUBST(ARCH,$ARCH) |
| AC_MSG_RESULT($ARCH) |
| |
| dnl Check for the endianness of the target |
| AC_C_BIGENDIAN(AC_SUBST([ENDIAN],[big]),AC_SUBST([ENDIAN],[little])) |
| |
| dnl ===----------------------------------------------------------------------=== |
| dnl -- |
| dnl -- SECTION 4: Check For Programs We Need |
| dnl -- |
| dnl ===----------------------------------------------------------------------=== |
| |
| dnl Find the install program (needs to be done before canonical stuff) |
| AC_PROG_INSTALL |
| |
| dnl Check for compilation tools |
| AC_PROG_CXX |
| AC_PROG_CC |
| AC_PROG_CPP |
| |
| dnl Checks for other build tools |
| AC_PROG_FLEX |
| AC_PROG_BISON |
| AC_PROG_LIBTOOL |
| |
| dnl Checks for tools we can get away with not having: |
| AC_PATH_PROG(DOT,[dot],[true dot]) |
| AC_PATH_PROG(ETAGS,[etags],[true etags]) |
| AC_PATH_PROG(PYTHON,[python],[true python]) |
| AC_PATH_PROG(QMTEST,[qmtest],[true qmtest]) |
| |
| dnl ===----------------------------------------------------------------------=== |
| dnl -- |
| dnl -- SECTION 5: Basic sanity checks on dependent programs we need |
| dnl -- |
| dnl ===----------------------------------------------------------------------=== |
| |
| dnl Ensure that compilation tools are GCC; we use GCC specific extensions |
| if test "$GCC" != "yes" |
| then |
| AC_MSG_ERROR([gcc required but not found]) |
| fi |
| |
| dnl Ensure that compilation tools are GCC; we use GCC specific extensions |
| if test "$GXX" != "yes" |
| then |
| AC_MSG_ERROR([g++ required but not found]) |
| fi |
| |
| dnl Verify that GCC is version 3.0 or higher |
| gccmajor=`$CC --version | head -n 1 | awk '{print $NF;}' | cut -d. -f1` |
| if test "$gccmajor" -lt "3" |
| then |
| AC_MSG_ERROR([gcc 3.x required, but you have a lower version]) |
| fi |
| |
| dnl Check for GNU Make. We use its extensions too, so don't build without it |
| AC_CHECK_GNU_MAKE |
| if test -z "$_cv_gnu_make_command" |
| then |
| AC_MSG_ERROR([GNU Make required but not found]) |
| fi |
| |
| dnl Find the LLVM GCC-based C/C++ front end |
| AC_MSG_CHECKING([for llvm-gcc]) |
| LLVM_GCC_CHECK=no |
| if test -d "$LLVMGCCDIR" |
| then |
| if test -x "$LLVMGCCDIR/bin/gcc" |
| then |
| LLVM_GCC_CHECK="$LLVMGCCDIR/bin/gcc" |
| fi |
| fi |
| llvmgccwarn=no |
| AC_MSG_RESULT($LLVM_GCC_CHECK) |
| if test "$LLVM_GCC_CHECK" = "no" |
| then |
| llvmgccwarn=yes |
| fi |
| |
| dnl Determine if the "gcc" found produces LLVM assembly. If so its "sane" |
| AC_MSG_CHECKING([whether llvm-gcc is sane]) |
| LLVM_GCC_SANE=no |
| if test -x "$LLVM_GCC_CHECK" |
| then |
| cp /dev/null conftest.c |
| "$LLVM_GCC_CHECK" -S -o - conftest.c | grep implementation > /dev/null 2>&1 |
| if test $? -eq 0 |
| then |
| LLVM_GCC_SANE=yes |
| fi |
| rm conftest.c |
| llvmcc1path=`"$LLVM_GCC_CHECK" --print-prog-name=cc1` |
| AC_SUBST(LLVMCC1,$llvmcc1path) |
| llvmcc1pluspath=`"$LLVM_GCC_CHECK" --print-prog-name=cc1plus` |
| AC_SUBST(LLVMCC1PLUS,$llvmcc1pluspath) |
| fi |
| AC_MSG_RESULT($LLVM_GCC_SANE) |
| if test "$LLVM_GCC_SANE" = "no" |
| then |
| llvmgccwarn=yes |
| fi |
| |
| dnl Check if we know how to tell etags we are using C++: |
| etags_version=`$ETAGS --version 2>&1` |
| case "$etags_version" in |
| *[Ee]xuberant*) ETAGSFLAGS="--language-force=c++" ;; |
| *GNU\ Emacs*) ETAGSFLAGS="-l c++" ;; |
| *) ETAGSFLAGS="" ;; |
| esac |
| AC_SUBST(ETAGSFLAGS,$ETAGSFLAGS) |
| |
| if test "$PYTHON" = "false" |
| then |
| AC_MSG_WARN([Python is required for the test suite, but it was not found]) |
| fi |
| if test "$QMTEST" = "false" |
| then |
| AC_MSG_WARN([QMTest is required for the test suite, but it was not found]) |
| fi |
| |
| dnl Verify that the version of python available is high enough for qmtest |
| pyversion=`$PYTHON -V 2>&1 | cut -d\ -f2` |
| pymajor=`echo $pyversion | cut -d. -f1` |
| pyminor=`echo $pyversion | cut -d. -f2` |
| |
| if test "$pymajor" -ge "2" |
| then |
| if test "$pymajor" -eq "2" |
| then |
| if test "$pyminor" -lt "2" |
| then |
| AC_MSG_WARN([QMTest requires Python 2.2 or later]) |
| fi |
| fi |
| else |
| AC_MSG_WARN([QMTest requires Python 2.2 or later]) |
| fi |
| |
| dnl ===----------------------------------------------------------------------=== |
| dnl -- |
| dnl -- SECTION 6: Check For Needed Libraries |
| dnl -- |
| dnl ===----------------------------------------------------------------------=== |
| |
| dnl libelf is for sparc only; we can ignore it if we don't have it |
| AC_CHECK_LIB(elf, elf_begin) |
| |
| dnl Check for bzip2 and zlib compression libraries needed for archive |
| dnl reading/writing |
| AC_CHECK_LIB(bz2,BZ2_bzCompressInit,[bzip2_found=1],[bzip2_found=0]) |
| AC_CHECK_LIB(z,gzopen,[zlib_found=1],[zlib_found=0]) |
| |
| dnl dlopen() is required for plugin support. |
| AC_SEARCH_LIBS(dlopen,dl, |
| AC_DEFINE([HAVE_DLOPEN],[1], |
| [Define if dlopen() is available on this platform.]), |
| AC_MSG_WARN([dlopen() not found - disabling plugin support])) |
| |
| dnl mallinfo is optional; the code can compile (minus features) without it |
| AC_SEARCH_LIBS(mallinfo,malloc, |
| AC_DEFINE([HAVE_MALLINFO],[1], |
| [Define if mallinfo() is available on this platform.])) |
| |
| dnl pthread locking functions are optional - but llvm will not be thread-safe |
| dnl without locks. |
| AC_SEARCH_LIBS(pthread_mutex_lock,pthread, |
| AC_DEFINE([HAVE_PTHREAD_MUTEX_LOCK],[1],[Have pthread_mutex_lock])) |
| |
| |
| dnl ===----------------------------------------------------------------------=== |
| dnl -- |
| dnl -- SECTION 7: Check For Needed Header Files |
| dnl -- |
| dnl ===----------------------------------------------------------------------=== |
| |
| dnl We don't check for ancient stuff or things that are guaranteed to be there |
| dnl by the C++ standard. We always use the <cfoo> versions of <foo.h> C headers. |
| AC_HEADER_STDC |
| AC_HEADER_SYS_WAIT |
| AC_HEADER_TIME |
| AC_HEADER_MMAP_ANONYMOUS |
| |
| dnl Checks for POSIX and other various system-specific header files |
| AC_CHECK_HEADERS(fcntl.h limits.h sys/time.h unistd.h malloc.h sys/mman.h) |
| AC_CHECK_HEADERS(sys/resource.h dlfcn.h link.h execinfo.h windows.h) |
| |
| dnl Check for things that need to be included in public headers, and so |
| dnl for which we may not have access to a HAVE_* preprocessor #define. |
| dnl (primarily used in DataTypes.h) |
| AC_CHECK_HEADER([sys/types.h]) |
| AC_CHECK_HEADER([inttypes.h]) |
| AC_CHECK_HEADER([stdint.h]) |
| |
| dnl Checks for compression headers: |
| AC_CHECK_HEADERS([bzlib.h],[bzlib_h_found=1],[bzlib_h_found=0],[]) |
| AC_CHECK_HEADERS([zlib.h],[zlib_h_found=1],[zlib_h_found=0],[]) |
| |
| dnl ===----------------------------------------------------------------------=== |
| dnl -- |
| dnl -- SECTION 8: Check for specific features (types/functions/options/etc) |
| dnl -- |
| dnl ===----------------------------------------------------------------------=== |
| |
| dnl Check for types |
| AC_TYPE_PID_T |
| AC_TYPE_SIZE_T |
| AC_TYPE_SIGNAL |
| AC_STRUCT_TM |
| AC_CHECK_TYPES([int64_t],,AC_MSG_ERROR([Type int64_t required but not found])) |
| AC_CHECK_TYPES([uint64_t],, |
| AC_CHECK_TYPES([u_int64_t],, |
| AC_MSG_ERROR([Type uint64_t or u_int64_t required but not found]))) |
| |
| dnl Check for various C features |
| AC_C_PRINTF_A |
| AC_FUNC_ISNAN |
| AC_FUNC_ISINF |
| AC_FUNC_ALLOCA |
| AC_FUNC_MMAP |
| if test "$ac_cv_func_mmap_fixed_mapped" = "no" |
| then |
| AC_MSG_WARN([mmap() required but not found]) |
| fi |
| AC_FUNC_MMAP_FILE |
| if test "$ac_cv_func_mmap_file" = "no" |
| then |
| AC_MSG_WARN([mmap() of files required but not found]) |
| fi |
| AC_CHECK_FUNCS(getcwd gettimeofday strdup strtoq strtoll backtrace isatty) |
| AC_CHECK_FUNCS(mkstemp getrusage) |
| AC_CHECK_FUNC(mprotect,, |
| AC_MSG_ERROR([Function mprotect() required but not found])) |
| |
| dnl Check for C++ extensions |
| AC_CXX_HAVE_HASH_MAP |
| AC_CXX_HAVE_HASH_SET |
| AC_CXX_HAVE_STD_ITERATOR |
| AC_CXX_HAVE_BI_ITERATOR |
| AC_CXX_HAVE_FWD_ITERATOR |
| |
| dnl Determine if the linker supports the -R option. |
| AC_LINK_USE_R |
| |
| dnl ===----------------------------------------------------------------------=== |
| dnl -- |
| dnl -- SECTION 9: Remaining LLVM specific configuration items |
| dnl -- |
| dnl ===----------------------------------------------------------------------=== |
| |
| dnl Set up substitutions for compression libraries |
| if test $zlib_found -eq 1 -a $zlib_h_found -eq 1; then |
| AC_DEFINE([HAVE_ZLIB],[1], |
| [Define if zlib library is available on this platform.]) |
| AC_SUBST([HAVE_ZLIB],[1]) |
| else |
| AC_SUBST([HAVE_ZLIB],[0]) |
| fi |
| if test $bzip2_found -eq 1 -a $bzlib_h_found -eq 1 ; then |
| AC_DEFINE([HAVE_BZIP2],[1], |
| [Define if bzip2 library is available on this platform.]) |
| AC_SUBST([HAVE_BZIP2],[1]) |
| else |
| AC_SUBST([HAVE_BZIP2],[0]) |
| fi |
| |
| dnl Get libtool's idea of what the shared library suffix is. |
| dnl This is a hack; it relies on undocumented behavior. |
| AC_MSG_CHECKING([for shared library suffix]) |
| eval "SHLIBEXT=$shrext_cmds" |
| AC_MSG_RESULT($SHLIBEXT) |
| |
| dnl Propagate it to the Makefiles and config.h (for gccld & bugpoint). |
| AC_SUBST(SHLIBEXT,$SHLIBEXT) |
| AC_DEFINE_UNQUOTED(SHLIBEXT,"$SHLIBEXT", |
| [Extension that shared libraries have, e.g., ".so".]) |
| |
| # Translate the various configuration directories and other basic |
| # information into substitutions that will end up in config.h.in so |
| # that these configured values can be hard-wired into a program. |
| eval LLVM_PREFIX="${prefix}"; |
| eval LLVM_BINDIR="${prefix}/bin"; |
| eval LLVM_LIBDIR="${prefix}/lib"; |
| eval LLVM_DATADIR="${prefix}/data"; |
| eval LLVM_DOCSDIR="${prefix}/docs"; |
| eval LLVM_ETCDIR="${prefix}/etc"; |
| eval LLVM_INCLUDEDIR="${prefix}/include"; |
| eval LLVM_INFODIR="${prefix}/info"; |
| eval LLVM_MANDIR="${prefix}/man"; |
| LLVM_CONFIGTIME=`date` |
| |
| AC_SUBST(LLVM_PREFIX) |
| AC_SUBST(LLVM_BINDIR) |
| AC_SUBST(LLVM_LIBDIR) |
| AC_SUBST(LLVM_DATADIR) |
| AC_SUBST(LLVM_DOCSDIR) |
| AC_SUBST(LLVM_ETCDIR) |
| AC_SUBST(LLVM_INCLUDEDIR) |
| AC_SUBST(LLVM_INFODIR) |
| AC_SUBST(LLVM_MANDIR) |
| AC_SUBST(LLVM_CONFIGTIME) |
| |
| AC_DEFINE_UNQUOTED(LLVM_PREFIX,"$LLVM_PREFIX", |
| [Installation prefix directory]) |
| AC_DEFINE_UNQUOTED(LLVM_BINDIR, "$LLVM_BINDIR", |
| [Installation directory for binary executables]) |
| AC_DEFINE_UNQUOTED(LLVM_LIBDIR, "$LLVM_LIBDIR", |
| [Installation directory for libraries]) |
| AC_DEFINE_UNQUOTED(LLVM_DATADIR, "$LLVM_DATADIR", |
| [Installation directory for data files]) |
| AC_DEFINE_UNQUOTED(LLVM_DATADIR, "$LLVM_DOCSDIR", |
| [Installation directory for documentation]) |
| AC_DEFINE_UNQUOTED(LLVM_ETCDIR, "$LLVM_ETCDIR", |
| [Installation directory for config files]) |
| AC_DEFINE_UNQUOTED(LLVM_INCLUDEDIR, "$LLVM_INCLUDEDIR", |
| [Installation directory for include files]) |
| AC_DEFINE_UNQUOTED(LLVM_INFODIR, "$LLVM_INFODIR", |
| [Installation directory for .info files]) |
| AC_DEFINE_UNQUOTED(LLVM_MANDIR, "$LLVM_MANDIR", |
| [Installation directory for man pages]) |
| AC_DEFINE_UNQUOTED(LLVM_CONFIGTIME, "$LLVM_CONFIGTIME", |
| [Time at which LLVM was configured]) |
| |
| dnl ===----------------------------------------------------------------------=== |
| dnl -- SECTION 10: Define the output and put it out |
| dnl ===----------------------------------------------------------------------=== |
| |
| dnl Configure header files |
| AC_CONFIG_HEADERS([include/llvm/Config/config.h]) |
| AC_CONFIG_HEADERS([include/llvm/Support/DataTypes.h]) |
| AC_CONFIG_HEADERS([include/llvm/ADT/hash_map]) |
| AC_CONFIG_HEADERS([include/llvm/ADT/hash_set]) |
| AC_CONFIG_HEADERS([include/llvm/Support/ThreadSupport.h]) |
| AC_CONFIG_HEADERS([include/llvm/ADT/iterator]) |
| |
| dnl Configure makefiles |
| AC_CONFIG_FILES([Makefile]) |
| AC_CONFIG_FILES([lib/Makefile]) |
| AC_CONFIG_FILES([lib/Analysis/IPA/Makefile]) |
| AC_CONFIG_FILES([lib/Analysis/Makefile]) |
| AC_CONFIG_FILES([lib/Analysis/DataStructure/Makefile]) |
| AC_CONFIG_FILES([lib/AsmParser/Makefile]) |
| AC_CONFIG_FILES([lib/System/Makefile]) |
| AC_CONFIG_FILES([lib/Bytecode/Reader/Makefile]) |
| AC_CONFIG_FILES([lib/Bytecode/Makefile]) |
| AC_CONFIG_FILES([lib/Bytecode/Writer/Makefile]) |
| AC_CONFIG_FILES([lib/Bytecode/Archive/Makefile]) |
| AC_CONFIG_FILES([lib/CodeGen/Makefile]) |
| AC_CONFIG_FILES([lib/CodeGen/SelectionDAG/Makefile]) |
| AC_CONFIG_FILES([lib/Debugger/Makefile]) |
| AC_CONFIG_FILES([lib/ExecutionEngine/Interpreter/Makefile]) |
| AC_CONFIG_FILES([lib/ExecutionEngine/Makefile]) |
| AC_CONFIG_FILES([lib/ExecutionEngine/JIT/Makefile]) |
| AC_CONFIG_FILES([lib/Support/Makefile]) |
| AC_CONFIG_FILES([lib/Target/CBackend/Makefile]) |
| AC_CONFIG_FILES([lib/Target/Makefile]) |
| AC_CONFIG_FILES([lib/Target/Skeleton/Makefile]) |
| AC_CONFIG_FILES([lib/Target/PowerPC/Makefile]) |
| AC_CONFIG_FILES([lib/Target/SparcV9/Makefile]) |
| AC_CONFIG_FILES([lib/Target/SparcV9/InstrSched/Makefile]) |
| AC_CONFIG_FILES([lib/Target/SparcV9/LiveVar/Makefile]) |
| AC_CONFIG_FILES([lib/Target/SparcV9/ModuloScheduling/Makefile]) |
| AC_CONFIG_FILES([lib/Target/SparcV9/RegAlloc/Makefile]) |
| AC_CONFIG_FILES([lib/Target/X86/Makefile]) |
| AC_CONFIG_FILES([lib/Transforms/Hello/Makefile]) |
| AC_CONFIG_FILES([lib/Transforms/Makefile]) |
| AC_CONFIG_FILES([lib/Transforms/IPO/Makefile]) |
| AC_CONFIG_FILES([lib/Transforms/Instrumentation/ProfilePaths/Makefile]) |
| AC_CONFIG_FILES([lib/Transforms/Instrumentation/Makefile]) |
| AC_CONFIG_FILES([lib/Transforms/Scalar/Makefile]) |
| AC_CONFIG_FILES([lib/Transforms/Utils/Makefile]) |
| AC_CONFIG_FILES([lib/VMCore/Makefile]) |
| AC_CONFIG_FILES([utils/Makefile]) |
| AC_CONFIG_FILES([utils/Burg/Makefile]) |
| AC_CONFIG_FILES([utils/fpcmp/Makefile]) |
| AC_CONFIG_FILES([utils/TableGen/Makefile]) |
| AC_CONFIG_FILES([tools/Makefile]) |
| AC_CONFIG_FILES([tools/analyze/Makefile]) |
| AC_CONFIG_FILES([tools/llvmc/Makefile]) |
| AC_CONFIG_FILES([tools/bugpoint/Makefile]) |
| AC_CONFIG_FILES([tools/extract/Makefile]) |
| AC_CONFIG_FILES([tools/gccas/Makefile]) |
| AC_CONFIG_FILES([tools/gccld/Makefile]) |
| AC_CONFIG_FILES([tools/llvm-bcanalyzer/Makefile]) |
| AC_CONFIG_FILES([tools/llc/Makefile]) |
| AC_CONFIG_FILES([tools/llee/Makefile]) |
| AC_CONFIG_FILES([tools/lli/Makefile]) |
| AC_CONFIG_FILES([tools/llvm-ar/Makefile]) |
| AC_CONFIG_FILES([tools/llvm-as/Makefile]) |
| AC_CONFIG_FILES([tools/llvm-db/Makefile]) |
| AC_CONFIG_FILES([tools/llvm-dis/Makefile]) |
| AC_CONFIG_FILES([tools/llvm-link/Makefile]) |
| AC_CONFIG_FILES([tools/llvm-nm/Makefile]) |
| AC_CONFIG_FILES([tools/llvm-prof/Makefile]) |
| AC_CONFIG_FILES([tools/opt/Makefile]) |
| AC_CONFIG_FILES([tools/llvm-ld/Makefile]) |
| AC_CONFIG_FILES([tools/llvm-stub/Makefile]) |
| AC_CONFIG_FILES([runtime/Makefile]) |
| AC_CONFIG_FILES([runtime/GC/Makefile]) |
| AC_CONFIG_FILES([runtime/GC/SemiSpace/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/crtend/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libc/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libcurses/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libg/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libgcc/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libgdbm/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libm/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libmalloc/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libpthread/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libtermcap/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libucb/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libutempter/Makefile]) |
| AC_CONFIG_FILES([runtime/GCCLibraries/libutil/Makefile]) |
| AC_CONFIG_FILES([runtime/libdummy/Makefile]) |
| AC_CONFIG_FILES([runtime/libpng/Makefile]) |
| AC_CONFIG_FILES([runtime/libprofile/Makefile]) |
| AC_CONFIG_FILES([runtime/libtrace/Makefile]) |
| AC_CONFIG_FILES([runtime/zlib/Makefile]) |
| |
| dnl Make a link from lib/System/platform to lib/System/$llvm_platform_type |
| dnl This helps the #inclusion of the system specific include files |
| dnl for the operating system abstraction library |
| AC_CONFIG_LINKS(lib/System/platform:lib/System/$llvm_platform_type) |
| |
| dnl Configure all of the projects present in our source tree. |
| for i in `ls ${srcdir}/projects` |
| do |
| if test -d ${srcdir}/projects/${i} ; then |
| case ${i} in |
| "CVS") ;; |
| "sample") AC_CONFIG_SUBDIRS([projects/sample]) ;; |
| "Stacker") AC_CONFIG_SUBDIRS([projects/Stacker]) ;; |
| "llvm-test") AC_CONFIG_SUBDIRS([projects/llvm-test]) ;; |
| "llvm-reopt") AC_CONFIG_SUBDIRS([projects/llvm-reopt]);; |
| "llvm-gcc") AC_CONFIG_SUBDIRS([projects/llvm-gcc]) ;; |
| "Java") AC_CONFIG_SUBDIRS([projects/Java]) ;; |
| "llvm-tv") AC_CONFIG_SUBDIRS([projects/llvm-tv]) ;; |
| "llvm-fefw") AC_CONFIG_SUBDIRS([projects/llvm-fefw]) ;; |
| *) |
| AC_MSG_WARN([Unknown project (${i}) won't be configured automatically]) |
| ;; |
| esac |
| fi |
| done |
| dnl Create the output files |
| AC_OUTPUT |
| |
| dnl ===----------------------------------------------------------------------=== |
| dnl -- SECTION 11: Output warnings to user (always last so they see it) |
| dnl ===----------------------------------------------------------------------=== |
| |
| dnl Warn if we don't have a compression library |
| if test $bzip2_found -ne 1 ; then |
| if test $zlib_found -ne 1 ; then |
| AC_MSG_WARN([*** Neither zlib nor bzip2 compression libraries were found.]) |
| AC_MSG_WARN([*** Bytecode archives will not support compression!]) |
| AC_MSG_WARN([*** To correct, install the libraries and re-run configure.]) |
| fi |
| fi |
| |
| dnl Warn loudly if llvm-gcc was not obviously working |
| if test $llvmgccwarn = yes |
| then |
| AC_MSG_WARN([***** llvm C/C++ front end was not found, or does not]) |
| AC_MSG_WARN([***** appear to be working.]) |
| AC_MSG_WARN([***** ]) |
| AC_MSG_WARN([***** Please check configure's --with-llvmgccdir option.]) |
| AC_MSG_WARN([***** Runtime libraries (in llvm/runtime) will not be built,]) |
| AC_MSG_WARN([***** but you should be able to build the llvm tools.]) |
| fi |