| #!@PERL@ |
| ##===- tools/llvm-config ---------------------------------------*- perl -*-===## |
| # |
| # The LLVM Compiler Infrastructure |
| # |
| # This file was developed by Eric Kidd and is distributed under |
| # the University of Illinois Open Source License. See LICENSE.TXT for details. |
| # |
| ##===----------------------------------------------------------------------===## |
| # |
| # Synopsis: Prints out compiler options needed to build against an installed |
| # copy of LLVM. |
| # |
| # Syntax: llvm-config OPTIONS... [COMPONENTS...] |
| # |
| ##===----------------------------------------------------------------------===## |
| |
| use 5.006; |
| use strict; |
| use warnings; |
| |
| #---- begin autoconf values ---- |
| my $PACKAGE_NAME = q{@PACKAGE_NAME@}; |
| my $VERSION = q{@PACKAGE_VERSION@}; |
| my $PREFIX = q{@LLVM_PREFIX@}; |
| my $LLVM_CONFIGTIME = q{@LLVM_CONFIGTIME@}; |
| my $LLVM_SRC_ROOT = q{@abs_top_srcdir@}; |
| my $LLVM_OBJ_ROOT = q{@abs_top_builddir@}; |
| my $LLVM_ON_WIN32 = q{@LLVM_ON_WIN32@}; |
| my $LLVM_ON_UNIX = q{@LLVM_ON_UNIX@}; |
| my $LLVMGCCDIR = q{@LLVMGCCDIR@}; |
| my $LLVMGCC = q{@LLVMGCC@}; |
| my $LLVMGXX = q{@LLVMGXX@}; |
| my $LLVMGCC_VERSION = q{@LLVMGCC_VERSION@}; |
| my $LLVMGCC_MAJVERS = q{@LLVMGCC_MAJVERS@}; |
| my $ENDIAN = q{@ENDIAN@}; |
| my $SHLIBEXT = q{@SHLIBEXT@}; |
| my $EXEEXT = q{@EXEEXT@}; |
| my $OS = q{@OS@}; |
| my $ARCH = lc(q{@ARCH@}); |
| my $TARGET_TRIPLE = q{@target@}; |
| my $TARGETS_TO_BUILD = q{@TARGETS_TO_BUILD@}; |
| my $TARGET_HAS_JIT = q{@TARGET_HAS_JIT@}; |
| my @TARGETS_BUILT = map { lc($_) } qw{@TARGETS_TO_BUILD@}; |
| #---- end autoconf values ---- |
| |
| #---- begin Makefile values ---- |
| my $CXXFLAGS = q{@LLVM_CXXFLAGS@}; |
| my $LDFLAGS = q{@LLVM_LDFLAGS@}; |
| my $SYSTEM_LIBS = q{@LIBS@}; |
| my $LLVM_BUILDMODE = q{@LLVM_BUILDMODE@}; |
| #---- end Makefile values ---- |
| |
| # Figure out where llvm-config is being run from. Primarily, we care if it has |
| # been installed, or is running from the build directory, which changes the |
| # locations of some files. |
| |
| # Convert the current executable name into its directory (e.g. "."). |
| my ($RUN_DIR) = ($0 =~ /^(.*)\/.*$/); |
| |
| # Turn the directory into an absolute directory on the file system, also pop up |
| # from "bin" into the build or prefix dir. |
| my $ABS_RUN_DIR = `cd $RUN_DIR/..; pwd`; |
| chomp($ABS_RUN_DIR); |
| |
| # Compute the absolute object directory build, e.g. "foo/llvm/Debug". |
| my $ABS_OBJ_ROOT = "$LLVM_OBJ_ROOT/$LLVM_BUILDMODE"; |
| $ABS_OBJ_ROOT = `cd $ABS_OBJ_ROOT; pwd` if (-d $ABS_OBJ_ROOT); |
| chomp($ABS_OBJ_ROOT); |
| |
| my $INCLUDEDIR = "$ABS_RUN_DIR/include"; |
| my $LIBDIR = "$ABS_RUN_DIR/lib"; |
| my $BINDIR = "$ABS_RUN_DIR/bin"; |
| if ($ABS_RUN_DIR eq $ABS_OBJ_ROOT) { |
| # If we are running out of the build directory, the include dir is in the |
| # srcdir. |
| $INCLUDEDIR = "$LLVM_SRC_ROOT/include"; |
| } else { |
| # If installed, ignore the prefix the tree was configured with, use the |
| # current prefix. |
| $PREFIX = $ABS_RUN_DIR; |
| } |
| |
| sub usage; |
| sub fix_library_names (@); |
| sub fix_library_files (@); |
| sub expand_dependencies (@); |
| sub name_map_entries; |
| |
| # Parse our command-line arguments. |
| usage if @ARGV == 0; |
| my @components; |
| my $has_opt = 0; |
| my $want_libs = 0; |
| my $want_libnames = 0; |
| my $want_libfiles = 0; |
| my $want_components = 0; |
| foreach my $arg (@ARGV) { |
| if ($arg =~ /^-/) { |
| if ($arg eq "--version") { |
| $has_opt = 1; print "$VERSION\n"; |
| } elsif ($arg eq "--prefix") { |
| $has_opt = 1; print "$PREFIX\n"; |
| } elsif ($arg eq "--bindir") { |
| $has_opt = 1; print "$BINDIR\n"; |
| } elsif ($arg eq "--includedir") { |
| $has_opt = 1; print "$INCLUDEDIR\n"; |
| } elsif ($arg eq "--libdir") { |
| $has_opt = 1; print "$LIBDIR\n"; |
| } elsif ($arg eq "--cxxflags") { |
| $has_opt = 1; print "-I$INCLUDEDIR $CXXFLAGS\n"; |
| } elsif ($arg eq "--ldflags") { |
| $has_opt = 1; print "-L$LIBDIR $LDFLAGS $SYSTEM_LIBS\n"; |
| } elsif ($arg eq "--libs") { |
| $has_opt = 1; $want_libs = 1; |
| } elsif ($arg eq "--libnames") { |
| $has_opt = 1; $want_libnames = 1; |
| } elsif ($arg eq "--libfiles") { |
| $has_opt = 1; $want_libfiles = 1; |
| } elsif ($arg eq "--components") { |
| $has_opt = 1; print join(' ', name_map_entries), "\n"; |
| } elsif ($arg eq "--targets-built") { |
| $has_opt = 1; print join(' ', @TARGETS_BUILT), "\n"; |
| } elsif ($arg eq "--build-mode") { |
| $has_opt = 1; print "$LLVM_BUILDMODE\n"; |
| } elsif ($arg eq "--obj-root") { |
| $has_opt = 1; print `cd $LLVM_OBJ_ROOT/; pwd` . "\n"; |
| } elsif ($arg eq "--src-root") { |
| $has_opt = 1; print `cd $LLVM_SRC_ROOT/; pwd` . "\n"; |
| } else { |
| usage(); |
| } |
| } else { |
| push @components, $arg; |
| } |
| } |
| |
| # If no options were specified, fail. |
| usage unless $has_opt; |
| |
| # If no components were specified, default to 'all'. |
| if (@components == 0) { |
| push @components, 'all'; |
| } |
| |
| # Handle any arguments which require building our dependency graph. |
| if ($want_libs || $want_libnames || $want_libfiles) { |
| my @libs = expand_dependencies(@components); |
| print join(' ', fix_library_names(@libs)), "\n" if ($want_libs); |
| print join(' ', @libs), "\n" if ($want_libnames); |
| print join(' ', fix_library_files(@libs)), "\n" if ($want_libfiles); |
| } |
| |
| exit 0; |
| |
| #========================================================================== |
| # Support Routines |
| #========================================================================== |
| |
| sub usage { |
| print STDERR <<__EOD__; |
| Usage: llvm-config <OPTION>... [<COMPONENT>...] |
| |
| Get various configuration information needed to compile programs which use |
| LLVM. Typically called from 'configure' scripts. Examples: |
| llvm-config --cxxflags |
| llvm-config --ldflags |
| llvm-config --libs engine bcreader scalaropts |
| |
| Options: |
| --version Print LLVM version. |
| --prefix Print the installation prefix. |
| --src-root Print the source root LLVM was built from. |
| --obj-root Print the object root used to build LLVM. |
| --bindir Directory containing LLVM executables. |
| --includedir Directory containing LLVM headers. |
| --libdir Directory containing LLVM libraries. |
| --cxxflags C++ compiler flags for files that include LLVM headers. |
| --ldflags Print Linker flags. |
| --libs Libraries needed to link against LLVM components. |
| --libnames Bare library names for in-tree builds. |
| --libfiles Fully qualified library filenames for makefile depends. |
| --components List of all possible components. |
| --targets-built List of all targets currently built. |
| --build-mode Print build mode of LLVM tree (e.g. Debug or Release). |
| Typical components: |
| all All LLVM libraries (default). |
| backend Either a native backend or the C backend. |
| engine Either a native JIT or a bytecode interpreter. |
| __EOD__ |
| exit(1); |
| } |
| |
| # Use -lfoo instead of libfoo.a whenever possible, and add directories to |
| # files which can't be found using -L. |
| sub fix_library_names (@) { |
| my @libs = @_; |
| my @result; |
| foreach my $lib (@libs) { |
| # Transform the bare library name appropriately. |
| my ($basename) = ($lib =~ /^lib([^.]*)\.a/); |
| if (defined $basename) { |
| push @result, "-l$basename"; |
| } else { |
| push @result, "$LIBDIR/$lib"; |
| } |
| } |
| return @result; |
| } |
| |
| # Turn the list of libraries into a list of files. |
| sub fix_library_files(@) { |
| my @libs = @_; |
| my @result; |
| foreach my $lib (@libs) { |
| # Transform the bare library name into a filename. |
| push @result, "$LIBDIR/$lib"; |
| } |
| return @result; |
| } |
| |
| #========================================================================== |
| # Library Dependency Analysis |
| #========================================================================== |
| # Given a few human-readable library names, find all their dependencies |
| # and sort them into an order which the linker will like. If we packed |
| # our libraries into fewer archives, we could make the linker do much |
| # of this work for us. |
| # |
| # Libraries have two different types of names in this code: Human-friendly |
| # "component" names entered on the command-line, and the raw file names |
| # we use internally (and ultimately pass to the linker). |
| # |
| # To understand this code, you'll need a working knowledge of Perl 5, |
| # and possibly some quality time with 'man perlref'. |
| |
| sub load_dependencies; |
| sub build_name_map; |
| sub have_native_backend; |
| sub find_best_engine; |
| sub expand_names (@); |
| sub find_all_required_sets (@); |
| sub find_all_required_sets_helper ($$@); |
| |
| # Each "set" contains one or more libraries which must be included as a |
| # group (due to cyclic dependencies). Sets are represented as a Perl array |
| # reference pointing to a list of internal library names. |
| my @SETS; |
| |
| # Various mapping tables. |
| my %LIB_TO_SET_MAP; # Maps internal library names to their sets. |
| my %SET_DEPS; # Maps sets to a list of libraries they depend on. |
| my %NAME_MAP; # Maps human-entered names to internal names. |
| |
| # Have our dependencies been loaded yet? |
| my $DEPENDENCIES_LOADED = 0; |
| |
| # Given a list of human-friendly component names, translate them into a |
| # complete set of linker arguments. |
| sub expand_dependencies (@) { |
| my @libs = @_; |
| load_dependencies; |
| my @required_sets = find_all_required_sets(expand_names(@libs)); |
| my @sorted_sets = topologically_sort_sets(@required_sets); |
| |
| # Expand the library sets into libraries. |
| my @result; |
| foreach my $set (@sorted_sets) { push @result, @{$set}; } |
| return @result; |
| } |
| |
| # Load in the raw dependency data stored at the end of this file. |
| sub load_dependencies { |
| return if $DEPENDENCIES_LOADED; |
| $DEPENDENCIES_LOADED = 1; |
| while (<DATA>) { |
| # Parse our line. |
| my ($libs, $deps) = /^\s*([^:]+):\s+(.*)\s*$/; |
| die "Malformed dependency data" unless defined $deps; |
| my @libs = split(' ', $libs); |
| my @deps = split(' ', $deps); |
| |
| # Record our dependency data. |
| my $set = \@libs; |
| push @SETS, $set; |
| foreach my $lib (@libs) { $LIB_TO_SET_MAP{$lib} = $set; } |
| $SET_DEPS{$set} = \@deps; |
| } |
| build_name_map; |
| } |
| |
| # Build a map converting human-friendly component names into internal |
| # library names. |
| sub build_name_map { |
| # Add entries for all the actual libraries. |
| foreach my $set (@SETS) { |
| foreach my $lib (sort @$set) { |
| my $short_name = $lib; |
| $short_name =~ s/^(lib)?LLVM([^.]*)\..*$/$2/; |
| $short_name =~ tr/A-Z/a-z/; |
| $NAME_MAP{$short_name} = [$lib]; |
| } |
| } |
| |
| # Add virtual entries. |
| $NAME_MAP{'native'} = have_native_backend() ? [$ARCH] : []; |
| $NAME_MAP{'backend'} = have_native_backend() ? ['native'] : ['cbackend']; |
| $NAME_MAP{'engine'} = find_best_engine; |
| $NAME_MAP{'all'} = [name_map_entries]; # Must be last. |
| } |
| |
| # Return true if we have a native backend to use. |
| sub have_native_backend { |
| my %BUILT; |
| foreach my $target (@TARGETS_BUILT) { $BUILT{$target} = 1; } |
| return defined $NAME_MAP{$ARCH} && defined $BUILT{$ARCH}; |
| } |
| |
| # Find a working subclass of ExecutionEngine for this platform. |
| sub find_best_engine { |
| if (have_native_backend && $TARGET_HAS_JIT) { |
| return ['jit', 'native']; |
| } else { |
| return ['interpreter']; |
| } |
| } |
| |
| # Get all the human-friendly component names. |
| sub name_map_entries { |
| load_dependencies; |
| return sort keys %NAME_MAP; |
| } |
| |
| # Map human-readable names to internal library names. |
| sub expand_names (@) { |
| my @names = @_; |
| my @result; |
| foreach my $name (@names) { |
| if (defined $LIB_TO_SET_MAP{$name}) { |
| # We've hit bottom: An actual library name. |
| push @result, $name; |
| } elsif (defined $NAME_MAP{$name}) { |
| # We've found a short name to expand. |
| push @result, expand_names(@{$NAME_MAP{$name}}); |
| } else { |
| print STDERR "llvm-config: unknown component name: $name\n"; |
| exit(1); |
| } |
| } |
| return @result; |
| } |
| |
| # Given a list of internal library names, return all sets of libraries which |
| # will need to be included by the linker (in no particular order). |
| sub find_all_required_sets (@) { |
| my @libs = @_; |
| my %sets_added; |
| my @result; |
| find_all_required_sets_helper(\%sets_added, \@result, @libs); |
| return @result; |
| } |
| |
| # Recursive closures are pretty broken in Perl, so we're going to separate |
| # this function from find_all_required_sets and pass in the state we need |
| # manually, as references. Yes, this is fairly unpleasant. |
| sub find_all_required_sets_helper ($$@) { |
| my ($sets_added, $result, @libs) = @_; |
| foreach my $lib (@libs) { |
| my $set = $LIB_TO_SET_MAP{$lib}; |
| next if defined $$sets_added{$set}; |
| $$sets_added{$set} = 1; |
| push @$result, $set; |
| find_all_required_sets_helper($sets_added, $result, @{$SET_DEPS{$set}}); |
| } |
| } |
| |
| # Print a list of sets, with a label. Used for debugging. |
| sub print_sets ($@) { |
| my ($label, @sets) = @_; |
| my @output; |
| foreach my $set (@sets) { push @output, join(',', @$set); } |
| print "$label: ", join(';', @output), "\n"; |
| } |
| |
| # Returns true if $lib is a key in $added. |
| sub has_lib_been_added ($$) { |
| my ($added, $lib) = @_; |
| return defined $$added{$LIB_TO_SET_MAP{$lib}}; |
| } |
| |
| # Returns true if all the dependencies of $set appear in $added. |
| sub have_all_deps_been_added ($$) { |
| my ($added, $set) = @_; |
| #print_sets(" Checking", $set); |
| #print_sets(" Wants", $SET_DEPS{$set}); |
| foreach my $lib (@{$SET_DEPS{$set}}) { |
| return 0 unless has_lib_been_added($added, $lib); |
| } |
| return 1; |
| } |
| |
| # Given a list of sets, topologically sort them using dependencies. |
| sub topologically_sort_sets (@) { |
| my @sets = @_; |
| my %added; |
| my @result; |
| SCAN: while (@sets) { # We'll delete items from @sets as we go. |
| #print_sets("So far", reverse(@result)); |
| #print_sets("Remaining", @sets); |
| for (my $i = 0; $i < @sets; ++$i) { |
| my $set = $sets[$i]; |
| if (have_all_deps_been_added(\%added, $set)) { |
| push @result, $set; |
| $added{$set} = 1; |
| #print "Removing $i.\n"; |
| splice(@sets, $i, 1); |
| next SCAN; # Restart our scan. |
| } |
| } |
| die "Can't find a library with no dependencies"; |
| } |
| return reverse(@result); |
| } |
| |
| # Our library dependency data will be added after the '__END__' token, and will |
| # be read through the magic <DATA> filehandle. |
| __END__ |