| AC_PREREQ(2.61) |
| AC_INIT([ltp], [LTP_VERSION], [ltp@lists.linux.it]) |
| AC_CONFIG_AUX_DIR([.]) |
| AM_INIT_AUTOMAKE |
| AC_CONFIG_HEADERS([include/config.h]) |
| AC_CONFIG_MACRO_DIR([m4]) |
| AC_CONFIG_FILES([ \ |
| include/mk/config.mk \ |
| include/mk/config-openposix.mk \ |
| include/mk/features.mk \ |
| lib/ltp.pc \ |
| m4/Makefile \ |
| execltp \ |
| ]) |
| |
| AM_MAINTAINER_MODE([enable]) |
| |
| AM_CONDITIONAL(CROSS_COMPILATION, test x$cross_compiling = xyes) |
| |
| AC_CANONICAL_HOST |
| |
| AC_PROG_CC |
| # <= autoconf 2.61 doesn't have AC_PROG_AR, but 2.63 has it. Not sure about |
| # 2.62. |
| AC_DEFUN([AC_PROG_AR], [AC_CHECK_TOOL(AR, ar, :)]) |
| AC_PROG_AR |
| AC_PROG_LEX |
| AC_PROG_RANLIB |
| AC_DEFUN([AC_PROG_STRIP], [AC_CHECK_TOOL(STRIP, strip, :)]) |
| AC_PROG_STRIP |
| AC_PROG_YACC |
| |
| AC_PREFIX_DEFAULT(/opt/ltp) |
| |
| AC_CHECK_HEADERS([ \ |
| ifaddrs.h \ |
| keyutils.h \ |
| linux/can.h \ |
| linux/dccp.h \ |
| linux/cryptouser.h \ |
| linux/genetlink.h \ |
| linux/keyctl.h \ |
| linux/if_packet.h \ |
| linux/if_ether.h \ |
| linux/mempolicy.h \ |
| linux/module.h \ |
| linux/netlink.h \ |
| mm.h \ |
| netinet/sctp.h \ |
| pthread.h \ |
| sys/epoll.h \ |
| sys/fanotify.h \ |
| sys/inotify.h \ |
| sys/prctl.h \ |
| sys/shm.h \ |
| sys/ustat.h \ |
| sys/xattr.h \ |
| ]) |
| |
| AC_CHECK_FUNCS([ \ |
| profil \ |
| ustat \ |
| ]) |
| |
| # Tools knobs |
| |
| # Expect |
| AC_ARG_WITH([bash], |
| [AC_HELP_STRING([--with-bash], |
| [have the Bourne Again SHell interpreter (default=no)])], |
| [with_bash=yes], |
| ) |
| if test "x$with_bash" = xyes; then |
| AC_SUBST([WITH_BASH],["yes"]) |
| else |
| AC_SUBST([WITH_BASH],["no"]) |
| fi |
| |
| AC_ARG_WITH([expect], |
| [AC_HELP_STRING([--with-expect], |
| [have the Tcl/expect library (default=yes)])], |
| [with_expect=yes], |
| [with_expect=no] |
| ) |
| if test "x$with_expect" = xyes; then |
| AC_SUBST([WITH_EXPECT],["yes"]) |
| else |
| AC_SUBST([WITH_EXPECT],["no"]) |
| fi |
| |
| # Numa |
| AC_ARG_WITH([numa], |
| AC_HELP_STRING([--without-numa], |
| [without numa support (default=no)]), |
| [with_numa=no], |
| [with_numa=yes] |
| ) |
| |
| # Perl |
| AC_ARG_WITH([perl], |
| [AC_HELP_STRING([--with-perl], |
| [have a perl interpreter (default=yes)])], |
| [with_perl=yes], |
| [with_perl=no] |
| ) |
| if test "x$with_perl" = xyes; then |
| AC_SUBST([WITH_PERL],["yes"]) |
| else |
| AC_SUBST([WITH_PERL],["no"]) |
| fi |
| |
| # Python |
| AC_ARG_WITH([python], |
| [AC_HELP_STRING([--with-python], |
| [have a python interpreter (default=yes)])], |
| [with_python=yes], |
| [with_python=no] |
| ) |
| if test "x$with_python" = xyes; then |
| AC_SUBST([WITH_PYTHON],["yes"]) |
| else |
| AC_SUBST([WITH_PYTHON],["no"]) |
| fi |
| |
| # TI RPC |
| AC_ARG_WITH([tirpc], |
| AC_HELP_STRING([--without-tirpc], |
| [without libtirpc support (default=no)]), |
| [with_tirpc=no], |
| [with_tirpc=yes] |
| ) |
| # END tools knobs |
| |
| # Testsuites knobs |
| |
| AC_ARG_WITH([open-posix-testsuite], |
| [AC_HELP_STRING([--with-open-posix-testsuite], |
| [compile and install the open posix testsuite (default=no)])], |
| [with_open_posix_testsuite=$withval] |
| ) |
| if test "x$with_open_posix_testsuite" = xyes; then |
| AC_SUBST([WITH_OPEN_POSIX_TESTSUITE],["yes"]) |
| else |
| AC_SUBST([WITH_OPEN_POSIX_TESTSUITE],["no"]) |
| fi |
| |
| # testcases/realtime requires bash and python. |
| if test "x$with_bash" = xyes && test "x$with_python" = xyes; then |
| AC_ARG_WITH([realtime-testsuite], |
| [AC_HELP_STRING([--with-realtime-testsuite], |
| [compile and install the realtime testsuite (default=no)])], |
| [with_realtime_testsuite=yes] |
| ) |
| fi |
| if test "x$with_realtime_testsuite" = xyes; then |
| AC_SUBST([WITH_REALTIME_TESTSUITE],["yes"]) |
| # Run configure on testcases/realtime as well. |
| AC_CONFIG_SUBDIRS([testcases/realtime]) |
| else |
| AC_SUBST([WITH_REALTIME_TESTSUITE],["no"]) |
| fi |
| |
| AC_CONFIG_SUBDIRS([utils/ffsb-6.0-rc2]) |
| |
| AC_CONFIG_COMMANDS([syscalls.h], [cd ${ac_top_srcdir}/include/lapi/syscalls; ./regen.sh]) |
| |
| # END testsuites knobs |
| LTP_CHECK_FORTIFY_SOURCE |
| LTP_CHECK_CC_WARN_OLDSTYLE |
| LTP_CHECK_MKDTEMP |
| LTP_CHECK_CAPABILITY_SUPPORT |
| LTP_CHECK_CRYPTO |
| LTP_CHECK_LINUX_PTRACE |
| LTP_CHECK_NOMMU_LINUX |
| LTP_CHECK_PRCTL_SUPPORT |
| LTP_CHECK_SECUREBITS |
| LTP_CHECK_SELINUX |
| LTP_CHECK_SIGNAL |
| LTP_CHECK_SYSCALL_EVENTFD |
| LTP_CHECK_SYSCALL_MODIFY_LDT |
| LTP_CHECK_SYSCALL_QUOTACTL |
| LTP_CHECK_SYSCALL_SIGNALFD |
| LTP_CHECK_SYSCALL_UNSHARE |
| LTP_CHECK_SYSCALL_UTIMENSAT |
| LTP_CHECK_TASKSTATS |
| LTP_CHECK_TIME |
| LTP_CHECK_MADVISE |
| LTP_CHECK_ACL_SUPPORT |
| LTP_CHECK_FS_IOC_FLAGS |
| LTP_CHECK_MREMAP_FIXED |
| LTP_CHECK_KERNEL_DEVEL |
| LTP_CHECK_XFS_QUOTACTL |
| LTP_CHECK_CLONE_SUPPORTS_7_ARGS |
| LTP_CHECK_MKDIRAT |
| LTP_CHECK_FCHOWNAT |
| LTP_CHECK_FSTATAT |
| LTP_CHECK_MKNODAT |
| LTP_CHECK_READLINKAT |
| LTP_CHECK_OPENAT |
| LTP_CHECK_EXECVEAT |
| LTP_CHECK_RENAMEAT |
| LTP_CHECK_RENAMEAT2 |
| LTP_CHECK_STATX |
| LTP_CHECK_FALLOCATE |
| LTP_CHECK_SYSCALL_FCNTL |
| LTP_CHECK_SYSCALL_PERF_EVENT_OPEN |
| if test "x$with_tirpc" = xyes; then |
| LTP_CHECK_TIRPC |
| fi |
| LTP_CHECK_TEE |
| LTP_CHECK_SPLICE |
| LTP_CHECK_VMSPLICE |
| LTP_CHECK_TIMERFD |
| LTP_CHECK_IOVEC |
| LTP_CHECK_LINUXRANDOM |
| LTP_CHECK_IF_LINK |
| LTP_CHECK_KCMP |
| LTP_CHECK_KCMP_TYPE |
| LTP_CHECK_PREADV |
| LTP_CHECK_PWRITEV |
| LTP_CHECK_EPOLL_PWAIT |
| LTP_CHECK_KEYUTILS_SUPPORT |
| LTP_CHECK_SYNC_ADD_AND_FETCH |
| LTP_CHECK_BUILTIN_CLEAR_CACHE |
| LTP_CHECK_MMSGHDR |
| LTP_CHECK_UNAME_DOMAINNAME |
| LTP_CHECK_X_TABLES |
| LTP_CHECK_ATOMIC_MEMORY_MODEL |
| LTP_CHECK_TPACKET_V3 |
| LTP_DETECT_HOST_CPU |
| |
| if test "x$with_numa" = xyes; then |
| LTP_CHECK_SYSCALL_NUMA |
| numa_error_msg="test requires libnuma >= 2 and it's development packages" |
| else |
| numa_error_msg="NUMA support was disabled during build" |
| fi |
| AC_DEFINE_UNQUOTED(NUMA_ERROR_MSG, ["$numa_error_msg"], [Error message when no NUMA support]) |
| |
| AC_OUTPUT |