/*
 * Copyright (c) 2000 Silicon Graphics, Inc.  All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it would be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 *
 * Further, this software is distributed without any warranty that it is
 * free of the rightful claim of any third person regarding infringement
 * or the like.  Any license provided herein, whether implied or
 * otherwise, applies only to this software file.  Patent licenses, if
 * any, provided herein do not apply to combinations of this program with
 * other software, or any other product whatsoever.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write the Free Software Foundation, Inc., 59
 * Temple Place - Suite 330, Boston MA 02111-1307, USA.
 *
 * Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy,
 * Mountain View, CA  94043, or:
 *
 * http://www.sgi.com
 *
 * For further information regarding this notice, see:
 *
 * http://oss.sgi.com/projects/GenInfo/NoticeExplan/
 */
/*
 *
 * Lib i/o
 *
 * This file contains several functions to doing reads and writes.
 * It was written so that a single function could be called in a test
 * program and only a io type field value would have to change to
 * do different types of io.  There is even a couple of functions that
 * will allow you to parse a string to determine the iotype.
 *
 * This file contains functions for writing/reading to/from open files
 * Prototypes:
 *
 * Functions declared in this module - see individual function code for
 * usage comments:
 *
 *  int	 stride_bounds(int offset, int stride, int nstrides,
 *		      int bytes_per_stride, int *min, int *max);

 *  int  lio_write_buffer(int fd, int method, char *buffer, int size,
 *						char **errmsg, long wrd);
 *  int  lio_read_buffer(int fd, int method, char *buffer, int size,
 *						char **errmsg, long wrd);
 *
 *  #ifdef CRAY
 *  int  lio_wait4asyncio(int method, int fd, struct iosw **statptr)
 *  int  lio_check_asyncio(char *io_type, int size, struct iosw *status)
 *  #endif
 *  #ifdef sgi
 *  int  lio_wait4asyncio(int method, int fd, aiocb_t *aiocbp)
 *  int  lio_check_asyncio(char *io_type, int size, aiocb_t *aiocbp, int method)
 *  #endif
 *
 *  int  lio_parse_io_arg1(char *string)
 *  void lio_help1(char *prefix);
 *
 *  int  lio_parse_io_arg2(char *string, char **badtoken)
 *  void lio_help2(char *prefix);
 *
 *  int  lio_set_debug(int level);
 *
 *  char Lio_SysCall[];
 *  struct lio_info_type Lio_info1[];
 *  struct lio_info_type Lio_info2[];
 *
 *  Author : Richard Logan
 *
 */

#ifdef __linux__
#define _GNU_SOURCE
#define _LARGEFILE64_SOURCE
#endif
#include <stdio.h>
#include <ctype.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/param.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/file.h>
#include <signal.h>
#include <stdint.h>
#ifdef CRAY
#include <sys/secparm.h>
#include <sys/iosw.h>
#include <sys/listio.h>
#else
/* for linux or sgi */
#include <sys/uio.h> /* readv(2)/writev(2) */
#include <string.h>  /* bzero */
#endif
#if defined(__linux__) || defined(__sun) || defined(__hpux) || defined(_AIX)
#if !defined(UCLINUX) && !defined(__UCLIBC__)
#include <aio.h>
#endif
#endif
#include <stdlib.h> /* atoi, abs */

#include "tlibio.h"		/* defines LIO* marcos */

#ifndef PATH_MAX
#define PATH_MAX	MAXPATHLEN
#endif

#if 0 /* disabled until it's needed -- roehrich 6/11/97 */
#define BUG1_workaround	1 /* Work around a condition where aio_return gives
			   * a value of zero but there is no errno followup
			   * and the read/write operation actually did its
			   * job.   spr/pv 705244
			   */
#endif


static void lio_async_signal_handler();
#ifdef sgi
static void lio_async_callback_handler();
#endif

/*
 * Define the structure as used in lio_parse_arg1 and lio_help1
 */
struct lio_info_type  Lio_info1[] = {
    { "s", LIO_IO_SYNC, "sync i/o" },
    { "p", LIO_IO_ASYNC|LIO_WAIT_SIGACTIVE, "async i/o using a loop to wait for a signal" },
    { "b", LIO_IO_ASYNC|LIO_WAIT_SIGPAUSE, "async i/o using pause" },
    { "a", LIO_IO_ASYNC|LIO_WAIT_RECALL, "async i/o using recall/aio_suspend" },
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    { "r",
	LIO_RANDOM|LIO_IO_TYPES|LIO_WAIT_TYPES, "random sync i/o types and wait methods" },
    { "R",
	LIO_RANDOM|LIO_IO_ATYPES|LIO_WAIT_ATYPES, "random i/o types and wait methods" },
#else
    { "r",
	LIO_RANDOM|LIO_IO_TYPES|LIO_WAIT_TYPES, "random i/o types and wait methods" },
    { "R",
	LIO_RANDOM|LIO_IO_TYPES|LIO_WAIT_TYPES, "random i/o types and wait methods" },
#endif
    { "l", LIO_IO_SLISTIO|LIO_WAIT_RECALL, "single stride sync listio" },
    { "L", LIO_IO_ALISTIO|LIO_WAIT_RECALL, "single stride async listio using recall" },
    { "X", LIO_IO_ALISTIO|LIO_WAIT_SIGPAUSE, "single stride async listio using pause" },
    { "v", LIO_IO_SYNCV, "single buffer sync readv/writev" },
    { "P", LIO_IO_SYNCP, "sync pread/pwrite" },
};

/*
 * Define the structure used by lio_parse_arg2 and lio_help2
 */
struct lio_info_type  Lio_info2[] = {
    { "sync",      LIO_IO_SYNC,		"sync i/o (read/write)"},
    { "async",     LIO_IO_ASYNC,	"async i/o (reada/writea/aio_read/aio_write)" },
    { "slistio",   LIO_IO_SLISTIO,	"single stride sync listio" },
    { "alistio",   LIO_IO_ALISTIO,	"single stride async listio" },
    { "syncv",     LIO_IO_SYNCV,	"single buffer sync readv/writev"},
    { "syncp",     LIO_IO_SYNCP,	"pread/pwrite"},
    { "active",    LIO_WAIT_ACTIVE,	"spin on status/control values" },
    { "recall",    LIO_WAIT_RECALL,	"use recall(2)/aio_suspend(3) to wait for i/o to complete" },
    { "sigactive", LIO_WAIT_SIGACTIVE,  "spin waiting for signal" },
    { "sigpause",  LIO_WAIT_SIGPAUSE,	"call pause(2) to wait for signal" },
/* nowait is a touchy thing, it's an accident that this implementation worked at all.  6/27/97 roehrich */
/*    { "nowait",    LIO_WAIT_NONE,	"do not wait for async io to complete" },*/
    { "random",    LIO_RANDOM,		"set random bit" },
    { "randomall",
	LIO_RANDOM|LIO_IO_TYPES|LIO_WAIT_TYPES,
	"all random i/o types and wait methods (except nowait)" },
};

char Lio_SysCall[PATH_MAX];	/* string containing last i/o system call */

static volatile int Received_signal = 0;	/* number of signals received */
static volatile int Rec_signal;
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
static volatile int Received_callback = 0;	/* number of callbacks received */
static volatile int Rec_callback;
#endif
static char Errormsg[500];
static int Debug_level = 0;


/***********************************************************************
 * stride_bounds()
 *
 * Determine the bounds of a strided request, normalized to offset.  Returns
 * the number of bytes needed to satisfy the request, and optionally sets
 * *min and *max to the mininum and maximum bytes referenced, normalized
 * around offset.
 *
 * Returns -1 on error - the only possible error conditions are illegal values
 * for nstrides and/or bytes_per_stride - both parameters must be >= 0.
 *
 * (maule, 11/16/95)
 ***********************************************************************/

int
stride_bounds(offset, stride, nstrides, bytes_per_stride, min, max)
int	offset;
int	stride;
int	nstrides;
int	bytes_per_stride;
int	*min;
int	*max;
{
	int	nbytes, min_byte, max_byte;

	/*
	 * sanity checks ...
	 */

	if (nstrides < 0 || bytes_per_stride < 0) {
		return -1;
	}

	if (stride == 0) {
		stride = bytes_per_stride;
	}

	/*
	 * Determine the # of bytes needed to satisfy the request.  This
	 * value, along with the offset argument, determines the min and max
	 * bytes referenced.
	 */


	nbytes = abs(stride) * (nstrides-1) + bytes_per_stride;

	if (stride < 0) {
		max_byte = offset + bytes_per_stride - 1;
		min_byte = max_byte - nbytes + 1;
	} else {
		min_byte = offset;
		max_byte = min_byte + nbytes - 1;
	}

	if (min != NULL) {
		*min = min_byte;
	}

	if (max != NULL) {
		*max = max_byte;
	}

	return nbytes;
}

/***********************************************************************
 * This function will allow someone to set the debug level.
 ***********************************************************************/
int
lio_set_debug(level)
{
    int old;

    old = Debug_level;
    Debug_level = level;
    return old;
}

/***********************************************************************
 * This function will parse a string and return desired io-method.
 * Only the first character of the string is used.
 *
 * This function does not provide for meaningful option arguments,
 * but it supports current growfiles/btlk interface.
 *
 *  (rrl 04/96)
 ***********************************************************************/
int
lio_parse_io_arg1(char *string)
{
    unsigned int ind;
    int found=0;
    int mask=0;

    /*
     * Determine if token is a valid string.
     */
    for(ind=0; ind<sizeof(Lio_info1)/sizeof(struct lio_info_type); ind++) {
        if ( strcmp(string, Lio_info1[ind].token) == 0 ) {
            mask |= Lio_info1[ind].bits;
            found = 1;
            break;
        }
    }

    if ( found == 0 ) {
	return -1;
    }

    return mask;

}

/***********************************************************************
 * This function will print a help message describing the characters
 * that can be parsed by lio_parse_io_arg1().
 * They will be printed one per line.
 *  (rrl 04/96)
 ***********************************************************************/
void
lio_help1(char *prefix)
{
    unsigned int ind;

    for(ind=0; ind<sizeof(Lio_info1)/sizeof(struct lio_info_type); ind++) {
        printf("%s %s : %s\n", prefix,
            Lio_info1[ind].token, Lio_info1[ind].desc);
    }

    return;
}

/***********************************************************************
 * This function will parse a string and return the desired io-method.
 * This function will take a comma separated list of io type and wait
 * method tokens as defined in Lio_info2[].  If a token does not match
 * any of the tokens in Lio_info2[], it will be coverted to a number.
 * If it was a number, those bits are also set.
 *
 *  (rrl 04/96)
 ***********************************************************************/
int
lio_parse_io_arg2(char *string, char **badtoken)
{
   char *token = string;
   char *cc = token;
   char savecc;
   int found;
   int mask=0;

   int tmp;
   unsigned int ind;
   char chr;

   if ( token == NULL )
        return -1;

   for (;;) {
        for (; ((*cc != ',') && (*cc != '\0')); cc++);
        savecc = *cc;
        *cc = '\0';

        found = 0;

        /*
	 * Determine if token is a valid string or number and if
	 * so, add the bits to the mask.
          */
        for(ind=0; ind<sizeof(Lio_info2)/sizeof(struct lio_info_type); ind++) {
	    if ( strcmp(token, Lio_info2[ind].token) == 0 ) {
	        mask |= Lio_info2[ind].bits;
	        found = 1;
	        break;
	    }
        }

	/*
	 * If token does not match one of the defined tokens, determine
         * if it is a number, if so, add the bits.
	 */
	if ( !found ) {
	    if (sscanf(token, "%i%c", &tmp, &chr) == 1 ) {
                mask |= tmp;
	        found=1;
	    }
        }

        *cc = savecc;

        if (!found) {  /* token is not valid */
            if ( badtoken != NULL)
                *badtoken = token;
            return(-1);
        }

        if (savecc == '\0')
            break;

        token = ++cc;
    }

    return mask;
}

/***********************************************************************
 * This function will print a help message describing the tokens
 * that can be parsed by lio_parse_io_arg2().
 * It will print them one per line.
 *
 * (rrl 04/96)
 ***********************************************************************/
void
lio_help2(char *prefix)
{
    unsigned int ind;

    for(ind=0; ind<sizeof(Lio_info2)/sizeof(struct lio_info_type); ind++) {
	printf("%s %s : %s\n", prefix,
	    Lio_info2[ind].token, Lio_info2[ind].desc);
    }
    return;
}

/***********************************************************************
 * This is an internal signal handler.
 * If the handler is called, it will increment the Received_signal
 * global variable.
 ***********************************************************************/
static void
lio_async_signal_handler(int sig)
{
	if ( Debug_level )
	    printf("DEBUG %s/%d: received signal %d, a signal caught %d times\n",
		__FILE__, __LINE__, sig, Received_signal+1);

	Received_signal++;

	return;
}

#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
/***********************************************************************
 * This is an internal callback handler.
 * If the handler is called, it will increment the Received_callback
 * global variable.
 ***********************************************************************/
static void
lio_async_callback_handler(sigval_t sigval)
{
	if ( Debug_level )
	    printf("DEBUG %s/%d: received callback, nbytes=%ld, a callback called %d times\n",
		__FILE__, __LINE__, (long)sigval.sival_int, Received_callback+1);

	Received_callback++;

	return;
}
#endif /* sgi */

/***********************************************************************
 * lio_random_methods
 * This function will randomly choose an io type and wait method
 * from set of io types and wait methods.  Since this information
 * is stored in a bitmask, it randomly chooses an io type from
 * the io type bits specified and does the same for wait methods.
 *
 * Return Value
 * This function will return a value with all non choosen io type
 * and wait method bits cleared.  The LIO_RANDOM bit is also
 * cleared.  All other bits are left unchanged.
 *
 * (rrl 04/96)
 ***********************************************************************/
int
lio_random_methods(long curr_mask)
{
    int mask=0;
    long random_bit();

    /* remove random select, io type, and wait method bits from curr_mask */
    mask = curr_mask & (~(LIO_IO_TYPES | LIO_WAIT_TYPES | LIO_RANDOM));

    /* randomly select io type from specified io types */
    mask = mask | random_bit(curr_mask & LIO_IO_TYPES);

    /* randomly select wait methods  from specified wait methods */
    mask = mask | random_bit(curr_mask & LIO_WAIT_TYPES);

    return mask;
}

static void wait4sync_io(int fd, int read)
{
  fd_set s;
  FD_ZERO(&s);
  FD_SET(fd, &s);

  select(fd+1, read ? &s : NULL, read ? NULL : &s, NULL, NULL);
}

/***********************************************************************
 * Generic write function
 * This function can be used to do a write using write(2), writea(2),
 * aio_write(3), writev(2), pwrite(2),
 * or single stride listio(2)/lio_listio(3).
 * By setting the desired bits in the method
 * bitmask, the caller can control the type of write and the wait method
 * that will be used.  If no io type bits are set, write will be used.
 *
 * If async io was attempted and no wait method bits are set then the
 * wait method is: recall(2) for writea(2) and listio(2); aio_suspend(3) for
 * aio_write(3) and lio_listio(3).
 *
 * If multiple wait methods are specified,
 * only one wait method will be used. The order is predetermined.
 *
 * If the call specifies a signal and one of the two signal wait methods,
 * a signal handler for the signal is set.  This will reset an already
 * set handler for this signal.
 *
 * If the LIO_RANDOM method bit is set, this function will randomly
 * choose a io type and wait method from bits in the method argument.
 *
 * If an error is encountered, an error message will be generated
 * in a internal static buffer.  If errmsg is not NULL, it will
 * be updated to point to the static buffer, allowing the caller
 * to print the error message.
 *
 * Return Value
 *   If a system call fails, -errno is returned.
 *   If LIO_WAIT_NONE bit is set, the return value is the return value
 *   of the system call.
 *   If the io did not fail, the amount of data written is returned.
 *	If the size the system call say was written is different
 *	then what was asked to be written, errmsg is updated for
 *	this error condition.  The return value is still the amount
 *	the system call says was written.
 *
 * (rrl 04/96)
 ***********************************************************************/
int
lio_write_buffer(fd, method, buffer, size, sig, errmsg, wrd)
int fd;		/* open file descriptor */
int method;	/* contains io type and wait method bitmask */
char *buffer;	/* pointer to buffer */
int size;	/* the size of the io */
int sig;	/* signal to use if async io */
char **errmsg;	/* char pointer that will be updated to point to err message */
long wrd;	/* to allow future features, use zero for now */
{
    int ret = 0;	/* syscall return or used to get random method */
    char *io_type;		/* Holds string of type of io */
    int omethod = method;
    int listio_cmd;		/* Holds the listio/lio_listio cmd */
#ifdef  CRAY
    struct listreq request;	/* Used when a listio is wanted */
    struct iosw status, *statptr[1];
#else
    /* for linux or sgi */
    struct iovec iov;	/* iovec for writev(2) */
#endif
#if defined (sgi)
    aiocb_t aiocbp;	/* POSIX aio control block */
    aiocb_t *aiolist[1]; /* list of aio control blocks for lio_listio */
    off64_t poffset;	/* pwrite(2) offset */
#endif
#if defined(__linux__) && !defined(__UCLIBC__)
	struct aiocb aiocbp;	/* POSIX aio control block */
	struct aiocb *aiolist[1]; /* list of aio control blocks for lio_listio */
	off64_t poffset;	/* pwrite(2) offset */
#endif
    /*
     * If LIO_RANDOM bit specified, get new method randomly.
     */
    if ( method & LIO_RANDOM ) {
	if( Debug_level > 3 )
		printf("DEBUG %s/%d: method mask to choose from: %#o\n", __FILE__, __LINE__, method );
	method = lio_random_methods(method);
	if ( Debug_level > 2 )
	    printf("DEBUG %s/%d: random chosen method %#o\n", __FILE__, __LINE__, method);
    }

    if ( errmsg != NULL )
	*errmsg = Errormsg;

    Rec_signal=Received_signal;	/* get the current number of signals received */
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    Rec_callback=Received_callback;	/* get the current number of callbacks received */
#endif

#ifdef  CRAY
    memset(&status, 0x00, sizeof(struct iosw));
    memset(&request, 0x00, sizeof(struct listreq));
    statptr[0] = &status;
#else
    /* for linux or sgi */
    memset(&iov, 0x00, sizeof(struct iovec));
    iov.iov_base = buffer;
    iov.iov_len = size;
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
#if defined(sgi)
    memset(&aiocbp, 0x00, sizeof(aiocb_t));
#else
	memset(&aiocbp, 0x00, sizeof(struct aiocb));
#endif
    aiocbp.aio_fildes = fd;
    aiocbp.aio_nbytes = size;
    aiocbp.aio_buf = buffer;
/*    aiocbp.aio_offset = lseek( fd, 0, SEEK_CUR ); -- set below */
    aiocbp.aio_sigevent.sigev_notify = SIGEV_NONE;
    aiocbp.aio_sigevent.sigev_signo = 0;
#ifdef sgi
    aiocbp.aio_sigevent.sigev_func = NULL;
    aiocbp.aio_sigevent.sigev_value.sival_int = 0;
#elif defined(__linux__) && !defined(__UCLIBC__)
	aiocbp.aio_sigevent.sigev_notify_function = NULL;
	aiocbp.aio_sigevent.sigev_notify_attributes = 0;
#endif
    aiolist[0] = &aiocbp;

    if( (ret = lseek( fd, 0, SEEK_CUR )) == -1 ){
	ret = 0;
	/* If there is an error and it is not ESPIPE then kick out the error.
	 * If the fd is a fifo then we have to make sure that
	 * lio_random_methods() didn't select pwrite/pread; if it did then
	 * switch to write/read.
	 */
	if( errno == ESPIPE ){
		if( method & LIO_IO_SYNCP ){
			if( omethod & LIO_RANDOM ){
				method &= ~LIO_IO_SYNCP;
				method |= LIO_IO_SYNC;
				if( Debug_level > 2 )
					printf("DEBUG %s/%d: random chosen method switched to %#o for fifo\n", __FILE__, __LINE__, method );
			}
			else if( Debug_level ){
				printf("DEBUG %s/%d: pwrite will fail when it writes to a fifo\n",
				       __FILE__, __LINE__ );
			}
		}
		/* else: let it ride */
	}
	else{
		sprintf(Errormsg, "%s/%d lseek(fd=%d,0,SEEK_CUR) failed, errno=%d  %s",
			__FILE__, __LINE__, fd, errno, strerror(errno));
		return -errno;
	}
    }
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    poffset = (off64_t)ret;
#endif
    aiocbp.aio_offset = ret;

#endif

    /*
     * If the LIO_USE_SIGNAL bit is not set, only use the signal
     * if the LIO_WAIT_SIGPAUSE or the LIO_WAIT_SIGACTIVE bits are bit.
     * Otherwise there is not necessary a signal handler to trap
     * the signal.
     */
    if ( sig && !(method & LIO_USE_SIGNAL) &&
	! (method & LIO_WAIT_SIGTYPES) ){

	sig=0;	/* ignore signal parameter */
    }

#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    if ( sig && (method & LIO_WAIT_CBTYPES) )
	sig=0; /* ignore signal parameter */
#endif

    /*
     * only setup signal hander if sig was specified and
     * a sig wait method was specified.
     * Doing this will change the handler for this signal.  The
     * old signal handler will not be restored.
     *** restoring the signal handler could be added ***
     */

    if ( sig &&  (method & LIO_WAIT_SIGTYPES) ){
#ifdef CRAY
        sigctl(SCTL_REG, sig, lio_async_signal_handler);
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
        aiocbp.aio_sigevent.sigev_notify = SIGEV_SIGNAL;
	aiocbp.aio_sigevent.sigev_signo = sig;
        sigset(sig, lio_async_signal_handler);
#endif /* sgi */
    }
#if defined(sgi)
    else if( method & LIO_WAIT_CBTYPES ){
	/* sival_int just has to be something that I can use
	 * to identify the callback, and "size" happens to be handy...
	 */
	aiocbp.aio_sigevent.sigev_notify = SIGEV_CALLBACK;
	aiocbp.aio_sigevent.sigev_func = lio_async_callback_handler;
	aiocbp.aio_sigevent.sigev_value.sival_int = size;
    }
#endif
#if defined(__linux__) && !defined(__UCLIBC__)
	else if( method & LIO_WAIT_CBTYPES ){
		/* sival_int just has to be something that I can use
		 * to identify the callback, and "size" happens to be handy...
		 */
		aiocbp.aio_sigevent.sigev_notify = SIGEV_THREAD;
		aiocbp.aio_sigevent.sigev_notify_function = lio_async_callback_handler;
		aiocbp.aio_sigevent.sigev_notify_attributes = (void*)(uintptr_t)size;
	}
#endif
    /*
     * Determine the system call that will be called and produce
     * the string of the system call and place it in Lio_SysCall.
     * Also update the io_type char pointer to give brief description
     * of system call.  Execute the system call and check for
     * system call failure.  If sync i/o, return the number of
     * bytes written/read.
     */

	if ( (method & LIO_IO_SYNC) || (method & (LIO_IO_TYPES | LIO_IO_ATYPES)) == 0 ){
	/*
	 * write(2) is used if LIO_IO_SYNC bit is set or not none
         * of the LIO_IO_TYPES bits are set (default).
         */

	sprintf(Lio_SysCall,
	    "write(%d, buf, %d)", fd, size);
	io_type="write";

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }
        while(1) {
          if (((ret = write(fd, buffer, size)) == -1) && errno!=EAGAIN && errno!=EINTR) {
            sprintf(Errormsg, "%s/%d write(%d, buf, %d) ret:-1, errno=%d %s",
                    __FILE__, __LINE__,
                    fd, size, errno, strerror(errno));
            return -errno;
          }

          if(ret!=-1) {
            if ( ret != size ) {
              sprintf(Errormsg,
                      "%s/%d write(%d, buf, %d) returned=%d",
                      __FILE__, __LINE__,
                      fd, size, ret);
              size-=ret;
              buffer+=ret;
            }
            else {
              if ( Debug_level > 1 )
                printf("DEBUG %s/%d: write completed without error (ret %d)\n",
                       __FILE__, __LINE__, ret);

              return ret;
            }
          }
          wait4sync_io(fd, 0);
        }

    }

    else if ( method & LIO_IO_ASYNC ) {
#ifdef CRAY
	sprintf(Lio_SysCall,
	    "writea(%d, buf, %d, &status, %d)", fd, size, sig);
	io_type="writea";

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	sigoff();
	if ((ret = writea(fd, buffer, size, &status, sig)) == -1) {
	    sprintf(Errormsg,
		"%s/%d writea(%d, buf, %d, &stat, %d) ret:-1, errno=%d %s",
		    __FILE__, __LINE__,
		fd, size, sig, errno, strerror(errno));
	    sigon();
	    return -errno;
	}
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
	sprintf(Lio_SysCall,
	    "aio_write(fildes=%d, buf, nbytes=%d, signo=%d)", fd, size, sig);
	io_type="aio_write";

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	if( sig )
		sighold( sig );
	if ((ret = aio_write(&aiocbp)) == -1) {
	    sprintf(Errormsg,
		"%s/%d aio_write(fildes=%d, buf, nbytes=%d, signo=%d) ret:-1, errno=%d %s",
		    __FILE__, __LINE__,
		fd, size, sig, errno, strerror(errno));
	    if( sig )
		sigrelse( sig );
	    return -errno;
	}
#endif
    } /* LIO_IO_ASYNC */

    else if ( method & LIO_IO_SLISTIO ) {
#ifdef CRAY
	request.li_opcode = LO_WRITE;
	request.li_fildes = fd;
        request.li_buf = buffer;
        request.li_nbyte = size;
        request.li_status = &status;
        request.li_signo = sig;
        request.li_nstride = 0;
        request.li_filstride = 0;
        request.li_memstride = 0;

	listio_cmd=LC_WAIT;
	io_type="listio(2) sync write";

	sprintf(Lio_SysCall,
		"listio(LC_WAIT, &req, 1) LO_WRITE, fd:%d, nbyte:%d",
                fd, size);

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	sigoff();
	if ( listio(listio_cmd, &request, 1) == -1 ) {
            sprintf(Errormsg, "%s/%d %s failed, fd:%d, nbyte:%d errno=%d %s",
		    __FILE__, __LINE__,
		Lio_SysCall, fd, size, errno, strerror(errno));
	    sigon();
            return -errno;
        }

	if ( Debug_level > 1 )
            printf("DEBUG %s/%d: %s did not return -1\n",
		__FILE__, __LINE__, Lio_SysCall);

	ret=lio_check_asyncio(io_type, size,  &status);
	return ret;

#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))

	aiocbp.aio_lio_opcode = LIO_WRITE;
	listio_cmd=LIO_WAIT;
	io_type="lio_listio(3) sync write";

	sprintf(Lio_SysCall,
		"lio_listio(LIO_WAIT, aiolist, 1, NULL) LIO_WRITE, fd:%d, nbyte:%d, sig:%d",
                fd, size, sig );

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	if( sig )
	    sighold( sig );
	if ( lio_listio(listio_cmd, aiolist, 1, NULL) == -1 ) {
            sprintf(Errormsg, "%s/%d %s failed, fd:%d, nbyte:%d errno=%d %s",
		    __FILE__, __LINE__,
		Lio_SysCall, fd, size, errno, strerror(errno));
	    if( sig )
		sigrelse( sig );
            return -errno;
        }

	if ( Debug_level > 1 )
            printf("DEBUG %s/%d: %s did not return -1\n",
		__FILE__, __LINE__, Lio_SysCall);

	ret=lio_check_asyncio(io_type, size,  &aiocbp, method);
	return ret;
#endif
    } /* LIO_IO_SLISTIO */

    else if ( method & LIO_IO_ALISTIO ) {
#ifdef CRAY
	request.li_opcode = LO_WRITE;
	request.li_fildes = fd;
        request.li_buf = buffer;
        request.li_nbyte = size;
        request.li_status = &status;
        request.li_signo = sig;
        request.li_nstride = 0;
        request.li_filstride = 0;
        request.li_memstride = 0;

	listio_cmd=LC_START;
	io_type="listio(2) async write";

	sprintf(Lio_SysCall,
		"listio(LC_START, &req, 1) LO_WRITE, fd:%d, nbyte:%d",
                fd, size);

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	sigoff();
	if ( listio(listio_cmd, &request, 1) == -1 ) {
            sprintf(Errormsg, "%s/%d %s failed, fd:%d, nbyte:%d errno=%d %s",
		    __FILE__, __LINE__,
		Lio_SysCall, fd, size, errno, strerror(errno));
	    sigon();
            return -errno;
        }
#endif
#if defined (sgi) || (defined(__linux__) && !defined(__UCLIBC__))
	aiocbp.aio_lio_opcode = LIO_WRITE;
	listio_cmd=LIO_NOWAIT;
	io_type="lio_listio(3) async write";

	sprintf(Lio_SysCall,
		"lio_listio(LIO_NOWAIT, aiolist, 1, NULL) LIO_WRITE, fd:%d, nbyte:%d",
                fd, size);

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	if( sig )
		sighold( sig );
	if ( lio_listio(listio_cmd, aiolist, 1, NULL) == -1 ) {
            sprintf(Errormsg, "%s/%d %s failed, fd:%d, nbyte:%d errno=%d %s",
		    __FILE__, __LINE__,
		Lio_SysCall, fd, size, errno, strerror(errno));
	    if( sig )
		sigrelse( sig );
            return -errno;
        }
#endif
    }/* LIO_IO_ALISTIO */

#ifndef CRAY
    else if ( method & LIO_IO_SYNCV ) {
	io_type="writev(2)";

	sprintf(Lio_SysCall,
		"writev(%d, &iov, 1) nbyte:%d", fd, size);

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }
	if ((ret = writev(fd, &iov, 1)) == -1) {
	    sprintf(Errormsg, "%s/%d writev(%d, iov, 1) nbyte:%d ret:-1, errno=%d %s",
		    __FILE__, __LINE__,
		fd, size, errno, strerror(errno));
	    return -errno;
	}

	if ( ret != size ) {
            sprintf(Errormsg,
		"%s/%d writev(%d, iov, 1) nbyte:%d returned=%d",
		    __FILE__, __LINE__,
		    fd, size, ret);
        }
        else if ( Debug_level > 1 )
            printf("DEBUG %s/%d: writev completed without error (ret %d)\n",
                __FILE__, __LINE__, ret);

        return ret;
    } /* LIO_IO_SYNCV */
#endif

#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    else if ( method & LIO_IO_SYNCP ) {
	io_type="pwrite(2)";

	sprintf(Lio_SysCall,
						"pwrite(%d, buf, %d, %lld)", fd, size, (long long)poffset);

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }
	if ((ret = pwrite(fd, buffer, size, poffset)) == -1) {
	    sprintf(Errormsg, "%s/%d pwrite(%d, buf, %d, %lld) ret:-1, errno=%d %s",
		    __FILE__, __LINE__,
							fd, size, (long long)poffset, errno, strerror(errno));
	    return -errno;
	}

	if ( ret != size ) {
            sprintf(Errormsg,
		"%s/%d pwrite(%d, buf, %d, %lld) returned=%d",
		    __FILE__, __LINE__,
							fd, size, (long long)poffset, ret);
        }
        else if ( Debug_level > 1 )
            printf("DEBUG %s/%d: pwrite completed without error (ret %d)\n",
                __FILE__, __LINE__, ret);

        return ret;
    } /* LIO_IO_SYNCP */
#endif

    else {
	printf("DEBUG %s/%d: No I/O method chosen\n", __FILE__, __LINE__ );
	return -1;
    }

    /*
     * wait for async io to complete.
     */
#ifdef CRAY
    ret=lio_wait4asyncio(method, fd, statptr);
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    ret=lio_wait4asyncio(method, fd, &aiocbp);
#endif

    /*
     * If there was an error waiting for async i/o to complete,
     * return the error value (errno) to the caller.
     * Note: Errormsg should already have been updated.
     */
    if ( ret < 0 ) {
	return ret;
    }

    /*
     * If i/o was not waited for (may not have been completed at this time),
     * return the size that was requested.
     */
    if ( ret == 1 )
	return size;

    /*
     * check that async io was successful.
     * Note:  if the there was an system call failure, -errno
     * was returned and Errormsg should already have been updated.
     * If amount i/o was different than size, Errormsg should already
     * have been updated but the actual i/o size if returned.
     */

#ifdef CRAY
    ret=lio_check_asyncio(io_type, size, &status);
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    ret=lio_check_asyncio(io_type, size, &aiocbp, method);
#endif

    return ret;
}	/* end of lio_write_buffer */

/***********************************************************************
 * Generic read function
 * This function can be used to do a read using read(2), reada(2),
 * aio_read(3), readv(2), pread(2),
 * or single stride listio(2)/lio_listio(3).
 * By setting the desired bits in the method
 * bitmask, the caller can control the type of read and the wait method
 * that will be used.  If no io type bits are set, read will be used.
 *
 * If async io was attempted and no wait method bits are set then the
 * wait method is: recall(2) for reada(2) and listio(2); aio_suspend(3) for
 * aio_read(3) and lio_listio(3).
 *
 * If multiple wait methods are specified,
 * only one wait method will be used. The order is predetermined.
 *
 * If the call specifies a signal and one of the two signal wait methods,
 * a signal handler for the signal is set.  This will reset an already
 * set handler for this signal.
 *
 * If the LIO_RANDOM method bit is set, this function will randomly
 * choose a io type and wait method from bits in the method argument.
 *
 * If an error is encountered, an error message will be generated
 * in a internal static buffer.  If errmsg is not NULL, it will
 * be updated to point to the static buffer, allowing the caller
 * to print the error message.
 *
 * Return Value
 *   If a system call fails, -errno is returned.
 *   If LIO_WAIT_NONE bit is set, the return value is the return value
 *   of the system call.
 *   If the io did not fail, the amount of data written is returned.
 *	If the size the system call say was written is different
 *	then what was asked to be written, errmsg is updated for
 *	this error condition.  The return value is still the amount
 *	the system call says was written.
 *
 * (rrl 04/96)
 ***********************************************************************/
int
lio_read_buffer(fd, method, buffer, size, sig, errmsg, wrd)
int fd;		/* open file descriptor */
int method;	/* contains io type and wait method bitmask */
char *buffer;	/* pointer to buffer */
int size;	/* the size of the io */
int sig;	/* signal to use if async io */
char **errmsg;	/* char pointer that will be updated to point to err message */
long wrd;	/* to allow future features, use zero for now */
{
    int ret = 0;	/* syscall return or used to get random method */
    char *io_type;		/* Holds string of type of io */
    int listio_cmd;		/* Holds the listio/lio_listio cmd */
    int omethod = method;
#ifdef  CRAY
    struct listreq request;	/* Used when a listio is wanted */
    struct iosw status, *statptr[1];
#else
    /* for linux or sgi */
    struct iovec iov; /* iovec for readv(2) */
#endif
#ifdef sgi
    aiocb_t aiocbp;	/* POSIX aio control block */
    aiocb_t *aiolist[1]; /* list of aio control blocks for lio_listio */
    off64_t poffset;	/* pread(2) offset */
#endif
#if defined (__linux__) && !defined(__UCLIBC__)
	struct aiocb aiocbp;	/* POSIX aio control block */
	struct aiocb *aiolist[1]; /* list of aio control blocks for lio_listio */
	off64_t poffset;	/* pread(2) offset */
#endif

    /*
     * If LIO_RANDOM bit specified, get new method randomly.
     */
    if ( method & LIO_RANDOM ) {
	if( Debug_level > 3 )
		printf("DEBUG %s/%d: method mask to choose from: %#o\n", __FILE__, __LINE__, method );
	method = lio_random_methods(method);
	if ( Debug_level > 2 )
	    printf("DEBUG %s/%d: random chosen method %#o\n", __FILE__, __LINE__, method);
    }

    if ( errmsg != NULL )
	*errmsg = Errormsg;

    Rec_signal=Received_signal;	/* get the current number of signals received */
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    Rec_callback=Received_callback;	/* get the current number of callbacks received */
#endif

#ifdef  CRAY
    memset(&status, 0x00, sizeof(struct iosw));
    memset(&request, 0x00, sizeof(struct listreq));
    statptr[0] = &status;
#else
    /* for linux or sgi */
    memset(&iov, 0x00, sizeof(struct iovec));
    iov.iov_base = buffer;
    iov.iov_len = size;
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
#if defined(sgi)
    memset(&aiocbp, 0x00, sizeof(aiocb_t));
#else
	memset(&aiocbp, 0x00, sizeof(struct aiocb));
#endif
    aiocbp.aio_fildes = fd;
    aiocbp.aio_nbytes = size;
    aiocbp.aio_buf = buffer;
/*    aiocbp.aio_offset = lseek( fd, 0, SEEK_CUR ); -- set below */
    aiocbp.aio_sigevent.sigev_notify = SIGEV_NONE;
    aiocbp.aio_sigevent.sigev_signo = 0;
#ifdef sgi
    aiocbp.aio_sigevent.sigev_func = NULL;
    aiocbp.aio_sigevent.sigev_value.sival_int = 0;
#elif defined(__linux__) && !defined(__UCLIBC__)
	aiocbp.aio_sigevent.sigev_notify_function = NULL;
	aiocbp.aio_sigevent.sigev_notify_attributes = 0;
#endif
    aiolist[0] = &aiocbp;

    if( (ret = lseek( fd, 0, SEEK_CUR )) == -1 ){
	ret = 0;
	/* If there is an error and it is not ESPIPE then kick out the error.
	 * If the fd is a fifo then we have to make sure that
	 * lio_random_methods() didn't select pwrite/pread; if it did then
	 * switch to write/read.
	 */
	if( errno == ESPIPE ){
		if( method & LIO_IO_SYNCP ){
			if( omethod & LIO_RANDOM ){
				method &= ~LIO_IO_SYNCP;
				method |= LIO_IO_SYNC;
				if( Debug_level > 2 )
					printf("DEBUG %s/%d: random chosen method switched to %#o for fifo\n", __FILE__, __LINE__, method );
			}
			else if( Debug_level ){
				printf("DEBUG %s/%d: pread will fail when it reads from a fifo\n",
				       __FILE__, __LINE__ );
			}
		}
		/* else: let it ride */
	}
	else{
		sprintf(Errormsg, "%s/%d lseek(fd=%d,0,SEEK_CUR) failed, errno=%d  %s",
			__FILE__, __LINE__, fd, errno, strerror(errno));
		return -errno;
	}
    }
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    poffset = (off64_t)ret;
#endif
    aiocbp.aio_offset = ret;

#endif

    /*
     * If the LIO_USE_SIGNAL bit is not set, only use the signal
     * if the LIO_WAIT_SIGPAUSE or the LIO_WAIT_SIGACTIVE bits are set.
     * Otherwise there is not necessarily a signal handler to trap
     * the signal.
     */
    if ( sig && !(method & LIO_USE_SIGNAL) &&
        ! (method & LIO_WAIT_SIGTYPES) ){

        sig=0;  /* ignore signal parameter */
    }

#if defined(sgi) || (defined(__linux__)&& !defined(__UCLIBC__))
    if ( sig && (method & LIO_WAIT_CBTYPES) )
	sig=0; /* ignore signal parameter */
#endif

    /*
     * only setup signal hander if sig was specified and
     * a sig wait method was specified.
     * Doing this will change the handler for this signal.  The
     * old signal handler will not be restored.
     *** restoring the signal handler could be added ***
     */

    if ( sig &&  (method & LIO_WAIT_SIGTYPES) ){
#ifdef CRAY
	    sigctl(SCTL_REG, sig, lio_async_signal_handler);
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
	    aiocbp.aio_sigevent.sigev_notify = SIGEV_SIGNAL;
	    aiocbp.aio_sigevent.sigev_signo = sig;
	    sigset(sig, lio_async_signal_handler);
#endif /* CRAY */
    }
#if defined(sgi)
    else if( method & LIO_WAIT_CBTYPES ){
	    aiocbp.aio_sigevent.sigev_notify = SIGEV_CALLBACK;
	    aiocbp.aio_sigevent.sigev_func = lio_async_callback_handler;
	    /* sival_int just has to be something that I can use
	     * to identify the callback, and "size" happens to be handy...
	     */
	    aiocbp.aio_sigevent.sigev_value.sival_int = size;
    }
#endif
#if defined(__linux__) && !defined(__UCLIBC__)
	else if( method & LIO_WAIT_CBTYPES ){
		aiocbp.aio_sigevent.sigev_notify = SIGEV_THREAD;
		aiocbp.aio_sigevent.sigev_notify_function = lio_async_callback_handler;
		/* sival_int just has to be something that I can use
		 * to identify the callback, and "size" happens to be handy...
		 */
		aiocbp.aio_sigevent.sigev_notify_attributes = (void*)(uintptr_t)size;
	}
#endif

    /*
     * Determine the system call that will be called and produce
     * the string of the system call and place it in Lio_SysCall.
     * Also update the io_type char pointer to give brief description
     * of system call.  Execute the system call and check for
     * system call failure.  If sync i/o, return the number of
     * bytes written/read.
     */

	if ( (method & LIO_IO_SYNC) || (method & (LIO_IO_TYPES | LIO_IO_ATYPES)) == 0 ){
	/*
	 * read(2) is used if LIO_IO_SYNC bit is set or not none
         * of the LIO_IO_TYPES bits are set (default).
         */

	sprintf(Lio_SysCall,
	    "read(%d, buf, %d)", fd, size);
	io_type="read";

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

        while(1) {
          if (((ret = read(fd, buffer, size)) == -1) && errno!=EINTR && errno!=EAGAIN) {
            sprintf(Errormsg, "%s/%d read(%d, buf, %d) ret:-1, errno=%d %s",
                    __FILE__, __LINE__,
                    fd, size, errno, strerror(errno));
            return -errno;
          }

          if(ret==0) return 0;
          if(ret!=-1) {
            if ( ret != size ) {
              sprintf(Errormsg,
                      "%s/%d read(%d, buf, %d) returned=%d",
                      __FILE__, __LINE__,
                      fd, size, ret);
              size-=ret;
              buffer+=ret;
            }
            else {
              if ( Debug_level > 1 )
                printf("DEBUG %s/%d: read completed without error (ret %d)\n",
                       __FILE__, __LINE__, ret);

              return ret;
            }
          }
          wait4sync_io(fd, 1);
        }

    }

    else if ( method & LIO_IO_ASYNC ) {
#ifdef CRAY
	sprintf(Lio_SysCall,
	    "reada(%d, buf, %d, &status, %d)", fd, size, sig);
	io_type="reada";

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	sigoff();
	if ((ret = reada(fd, buffer, size, &status, sig)) == -1) {
	    sprintf(Errormsg,
		"%s/%d reada(%d, buf, %d, &stat, %d) ret:-1, errno=%d %s",
		    __FILE__, __LINE__,
		fd, size, sig, errno, strerror(errno));
	    sigon();
	    return -errno;
	}
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
	sprintf(Lio_SysCall,
	    "aio_read(fildes=%d, buf, nbytes=%d, signo=%d)", fd, size, sig);
	io_type="aio_read";

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	if( sig )
		sighold( sig );
	if ((ret = aio_read(&aiocbp)) == -1) {
	    sprintf(Errormsg,
		"%s/%d aio_read(fildes=%d, buf, nbytes=%d, signo=%d) ret:-1, errno=%d %s",
		    __FILE__, __LINE__,
		fd, size, sig, errno, strerror(errno));
	    if( sig )
		sigrelse( sig );
	    return -errno;
	}
#endif
    } /* LIO_IO_ASYNC */

    else if ( method & LIO_IO_SLISTIO ) {
#ifdef CRAY
	request.li_opcode = LO_READ;
	request.li_fildes = fd;
        request.li_buf = buffer;
        request.li_nbyte = size;
        request.li_status = &status;
        request.li_signo = sig;
        request.li_nstride = 0;
        request.li_filstride = 0;
        request.li_memstride = 0;

	listio_cmd=LC_WAIT;
	io_type="listio(2) sync read";

	sprintf(Lio_SysCall,
		"listio(LC_WAIT, &req, 1) LO_READ, fd:%d, nbyte:%d",
                fd, size);

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	sigoff();
	if ( listio(listio_cmd, &request, 1) == -1 ) {
            sprintf(Errormsg, "%s/%d %s failed, fd:%d, nbyte:%d errno=%d %s",
		    __FILE__, __LINE__,
		Lio_SysCall, fd, size, errno, strerror(errno));
	    sigon();
            return -errno;
        }

	if ( Debug_level > 1 )
            printf("DEBUG %s/%d: %s did not return -1\n",
		__FILE__, __LINE__, Lio_SysCall);

	ret=lio_check_asyncio(io_type, size,  &status);
	return ret;
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
	aiocbp.aio_lio_opcode = LIO_READ;
	listio_cmd=LIO_WAIT;
	io_type="lio_listio(3) sync read";

	sprintf(Lio_SysCall,
		"lio_listio(LIO_WAIT, aiolist, 1, NULL) LIO_READ, fd:%d, nbyte:%d",
                fd, size);

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	if( sig )
		sighold( sig );
	if ( lio_listio(listio_cmd, aiolist, 1, NULL) == -1 ) {
            sprintf(Errormsg, "%s/%d %s failed, fd:%d, nbyte:%d errno=%d %s",
		    __FILE__, __LINE__,
		Lio_SysCall, fd, size, errno, strerror(errno));
	    if( sig )
		sigrelse( sig );
            return -errno;
        }

	if ( Debug_level > 1 )
            printf("DEBUG %s/%d: %s did not return -1\n",
		__FILE__, __LINE__, Lio_SysCall);

	ret=lio_check_asyncio(io_type, size,  &aiocbp, method);
	return ret;
#endif
    }/* LIO_IO_SLISTIO */

    else if ( method & LIO_IO_ALISTIO ) {
#ifdef CRAY
	request.li_opcode = LO_READ;
	request.li_fildes = fd;
        request.li_buf = buffer;
        request.li_nbyte = size;
        request.li_status = &status;
        request.li_signo = sig;
        request.li_nstride = 0;
        request.li_filstride = 0;
        request.li_memstride = 0;

	listio_cmd=LC_START;
	io_type="listio(2) async read";

	sprintf(Lio_SysCall,
		"listio(LC_START, &req, 1) LO_READ, fd:%d, nbyte:%d",
                fd, size);

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	sigoff();
	if ( listio(listio_cmd, &request, 1) == -1 ) {
            sprintf(Errormsg, "%s/%d %s failed, fd:%d, nbyte:%d errno=%d %s",
		    __FILE__, __LINE__,
		Lio_SysCall, fd, size, errno, strerror(errno));
	    sigon();
            return -errno;
        }
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
	aiocbp.aio_lio_opcode = LIO_READ;
	listio_cmd=LIO_NOWAIT;
	io_type="lio_listio(3) async read";

	sprintf(Lio_SysCall,
		"lio_listio(LIO_NOWAIT, aiolist, 1, NULL) LIO_READ, fd:%d, nbyte:%d",
                fd, size);

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }

	if( sig )
		sighold( sig );
	if ( lio_listio(listio_cmd, aiolist, 1, NULL) == -1 ) {
            sprintf(Errormsg, "%s/%d %s failed, fd:%d, nbyte:%d errno=%d %s",
		    __FILE__, __LINE__,
		Lio_SysCall, fd, size, errno, strerror(errno));
	    if( sig )
		sigrelse( sig );
            return -errno;
        }
#endif
    } /* LIO_IO_ALISTIO */

#ifndef CRAY
    else if ( method & LIO_IO_SYNCV ) {
	io_type="readv(2)";

	sprintf(Lio_SysCall,
		"readv(%d, &iov, 1) nbyte:%d", fd, size);

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }
	if ((ret = readv(fd, &iov, 1)) == -1) {
	    sprintf(Errormsg, "%s/%d readv(%d, iov, 1) nbyte:%d ret:-1, errno=%d %s",
		    __FILE__, __LINE__,
		fd, size, errno, strerror(errno));
	    return -errno;
	}

	if ( ret != size ) {
            sprintf(Errormsg,
		"%s/%d readv(%d, iov, 1) nbyte:%d returned=%d",
		    __FILE__, __LINE__,
		    fd, size, ret);
        }
        else if ( Debug_level > 1 )
            printf("DEBUG %s/%d: readv completed without error (ret %d)\n",
                __FILE__, __LINE__, ret);

        return ret;
    } /* LIO_IO_SYNCV */
#endif

#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    else if ( method & LIO_IO_SYNCP ) {
	io_type="pread(2)";

	sprintf(Lio_SysCall,
						"pread(%d, buf, %d, %lld)", fd, size, (long long)poffset);

        if ( Debug_level ) {
	    printf("DEBUG %s/%d: %s\n", __FILE__, __LINE__, Lio_SysCall);
        }
	if ((ret = pread(fd, buffer, size, poffset)) == -1) {
	    sprintf(Errormsg, "%s/%d pread(%d, buf, %d, %lld) ret:-1, errno=%d %s",
		    __FILE__, __LINE__,
							fd, size, (long long)poffset, errno, strerror(errno));
	    return -errno;
	}

	if ( ret != size ) {
            sprintf(Errormsg,
		"%s/%d pread(%d, buf, %d, %lld) returned=%d",
		    __FILE__, __LINE__,
							fd, size, (long long)poffset, ret);
        }
        else if ( Debug_level > 1 )
            printf("DEBUG %s/%d: pread completed without error (ret %d)\n",
                __FILE__, __LINE__, ret);

        return ret;
    } /* LIO_IO_SYNCP */
#endif

    else {
	printf("DEBUG %s/%d: No I/O method chosen\n", __FILE__, __LINE__ );
	return -1;
    }

    /*
     * wait for async io to complete.
     * Note: Sync io should have returned prior to getting here.
     */
#ifdef CRAY
    ret=lio_wait4asyncio(method, fd, statptr);
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    ret=lio_wait4asyncio(method, fd, &aiocbp);
#endif

    /*
     * If there was an error waiting for async i/o to complete,
     * return the error value (errno) to the caller.
     * Note: Errormsg should already have been updated.
     */
    if ( ret < 0 ) {
	return ret;
    }

    /*
     * If i/o was not waited for (may not have been completed at this time),
     * return the size that was requested.
     */
    if ( ret == 1 )
	return size;

    /*
     * check that async io was successful.
     * Note:  if the there was an system call failure, -errno
     * was returned and Errormsg should already have been updated.
     * If amount i/o was different than size, Errormsg should already
     * have been updated but the actual i/o size if returned.
     */

#ifdef CRAY
    ret=lio_check_asyncio(io_type, size, &status);
#endif
#if defined(sgi) || (defined(__linux__) && !defined(__UCLIBC__))
    ret=lio_check_asyncio(io_type, size, &aiocbp, method);
#endif

    return ret;
}	/* end of lio_read_buffer */


#if !defined(__sun) && !defined(__hpux) && !defined(_AIX)
/***********************************************************************
 * This function will check that async io was successful.
 * It can also be used to check sync listio since it uses the
 * same method.
 *
 * Return Values
 *  If status.sw_error is set, -status.sw_error is returned.
 *  Otherwise sw_count's field value is returned.
 *
 * (rrl 04/96)
 ***********************************************************************/
#ifdef CRAY
int lio_check_asyncio(char *io_type, int size, struct iosw *status)
#elif defined(sgi)
	int lio_check_asyncio(char *io_type, int size, aiocb_t *aiocbp, int method)
#elif defined(__linux__) && !defined(__UCLIBC__)
	int lio_check_asyncio(char *io_type, int size, struct aiocb *aiocbp, int method)
{
    int ret;

#ifdef CRAY
    if ( status->sw_error ) {
        sprintf(Errormsg,
            "%s/%d %s, sw_error set = %d %s, sw_count = %d",
		__FILE__, __LINE__, io_type,
            status->sw_error, strerror(status->sw_error), status->sw_count);
        return -status->sw_error;
    }
    else if ( status->sw_count != size ) {
        sprintf(Errormsg,
            "%s/%d %s, sw_count not as expected(%d), but actual:%d",
		__FILE__, __LINE__, io_type,
            size, status->sw_count);
    }
    else if ( Debug_level > 1 ) {
        printf("DEBUG %s/%d: %s completed without error (sw_error == 0, sw_count == %d)\n",
            __FILE__, __LINE__, io_type, status->sw_count);
    }

    return status->sw_count;

#else

    int cnt = 1;

    /* The I/O may have been synchronous with signal completion.  It doesn't
     * make sense, but the combination could be generated.  Release the
     * completion signal here otherwise it'll hang around and bite us
     * later.
     */
    if( aiocbp->aio_sigevent.sigev_notify == SIGEV_SIGNAL )
	sigrelse( aiocbp->aio_sigevent.sigev_signo );

    ret = aio_error( aiocbp );

    while( ret == EINPROGRESS ){
	ret = aio_error( aiocbp );
	++cnt;
    }
    if( cnt > 1 ){
	sprintf(Errormsg,
		"%s/%d %s, aio_error had to loop on EINPROGRESS, cnt=%d; random method %#o; sigev_notify=%s",
		__FILE__, __LINE__, io_type, cnt, method,
		(aiocbp->aio_sigevent.sigev_notify == SIGEV_SIGNAL ? "signal" :
		 aiocbp->aio_sigevent.sigev_notify == SIGEV_NONE ? "none" :
#ifdef SIGEV_CALLBACK
		 aiocbp->aio_sigevent.sigev_notify == SIGEV_CALLBACK ? "callback" :
#endif
		 aiocbp->aio_sigevent.sigev_notify == SIGEV_THREAD ? "thread" :
		 "unknown") );
	return -ret;
    }

    if( ret != 0 ){
	sprintf(Errormsg,
		"%s/%d %s, aio_error = %d %s; random method %#o",
		__FILE__, __LINE__, io_type,
		ret, strerror(ret),
		method );
	return -ret;
    }
    ret = aio_return( aiocbp );
    if( ret != size ){
	sprintf(Errormsg,
		"%s/%d %s, aio_return not as expected(%d), but actual:%d",
		__FILE__, __LINE__, io_type,
		size, ret);

#ifdef BUG1_workaround
	if( ret == 0 ){
		ret = size;
		if( Debug_level > 1 ){
			printf("WARN %s/%d: %s completed with bug1_workaround (aio_error == 0, aio_return now == %d)\n",
			       __FILE__, __LINE__, io_type, ret);
		}
	}
#endif /* BUG1_workaround */

    }
    else if( Debug_level > 1 ){
        printf("DEBUG %s/%d: %s completed without error (aio_error == 0, aio_return == %d)\n",
            __FILE__, __LINE__, io_type, ret);
    }

    return ret;

#endif
} /* end of lio_check_asyncio */
#endif

/***********************************************************************
 *
 * This function will wait for async io to complete.
 * If multiple wait methods are specified, the order is predetermined
 * to LIO_WAIT_RECALL,
 * LIO_WAIT_ACTIVE, LIO_WAIT_SIGPAUSE, LIO_WAIT_SIGACTIVE,
 * then LIO_WAIT_NONE.
 *
 * If no wait method was specified the default wait method is: recall(2)
 * or aio_suspend(3), as appropriate.
 *
 * Return Values
 *	<0: errno of failed recall
 *	0 : async io was completed
 *	1 : async was not waited for, io may not have completed.
 *
 * (rrl 04/96)
 ***********************************************************************/
#ifdef CRAY
int lio_wait4asyncio(int method, int fd, struct iosw **statptr)
#elif defined(sgi)
	int lio_wait4asyncio(int method, int fd, aiocb_t *aiocbp)
#elif defined(__linux__) && !defined(__UCLIBC__)
	int lio_wait4asyncio(int method, int fd, struct aiocb *aiocbp)
{
    int cnt;
#ifdef sgi
    int ret;
    const aiocb_t *aioary[1];
#endif
#if defined(__linux__)&& !defined(__UCLIBC__)
	int ret;
	const struct aiocb *aioary[1];
#endif

    if ( (method & LIO_WAIT_RECALL)
#if defined(sgi) || (defined(__linux__)&& !defined(__UCLIBC__))
	|| (method & LIO_WAIT_CBSUSPEND)
	|| (method & LIO_WAIT_SIGSUSPEND)
#endif
	|| ((method & LIO_WAIT_TYPES) == 0) ){
	/*
	 * If method has LIO_WAIT_RECALL bit set or method does
	 * not have any wait method bits set (default), use recall/aio_suspend.
         */
#ifdef CRAY
        if ( Debug_level > 2 )
            printf("DEBUG %s/%d: wait method : recall\n", __FILE__, __LINE__);
        sigon();
        if ( recall(fd, 1, statptr) ) {
	    sprintf(Errormsg, "%s/%d recall(%d, 1, stat) failed, errno:%d %s",
		    __FILE__, __LINE__,
		fd, errno, strerror(errno));
	    return -errno;
	}
#else
        if ( Debug_level > 2 )
            printf("DEBUG %s/%d: wait method : aio_suspend, sigev_notify=%s\n", __FILE__, __LINE__,
    		(aiocbp->aio_sigevent.sigev_notify == SIGEV_SIGNAL ? "signal" :
		 aiocbp->aio_sigevent.sigev_notify == SIGEV_NONE ? "none" :
#ifdef SIGEV_CALLBACK
		 aiocbp->aio_sigevent.sigev_notify == SIGEV_CALLBACK ? "callback" :
#endif
		 aiocbp->aio_sigevent.sigev_notify == SIGEV_THREAD ? "thread" :
		 "unknown") );

	aioary[0] = aiocbp;
	ret = aio_suspend( aioary, 1, NULL );
	if( (ret == -1) && (errno == EINTR) ){
		if( aiocbp->aio_sigevent.sigev_notify == SIGEV_SIGNAL ){
			if( Debug_level > 2 ){
				printf("DEBUG %s/%d: aio_suspend received EINTR, sigev_notify=SIGEV_SIGNAL -- ok\n",
				       __FILE__, __LINE__ );
			}
		}
		else {
			sprintf(Errormsg, "%s/%d aio_suspend received EINTR, sigev_notify=%s, not ok\n",
				__FILE__, __LINE__,
				(aiocbp->aio_sigevent.sigev_notify == SIGEV_SIGNAL ? "signal" :
				 aiocbp->aio_sigevent.sigev_notify == SIGEV_NONE ? "none" :
#ifdef SIGEV_CALLBACK
                                 aiocbp->aio_sigevent.sigev_notify == SIGEV_CALLBACK ? "callback" :
#endif
                                 aiocbp->aio_sigevent.sigev_notify == SIGEV_THREAD ? "thread" :
				 "unknown") );
			return -errno;
		}
	}
	else if ( ret ) {
	    sprintf(Errormsg, "%s/%d aio_suspend(fildes=%d, aioary, 1, NULL) failed, errno:%d %s",
		    __FILE__, __LINE__,
		fd, errno, strerror(errno));
	    return -errno;
	}
#endif

    } else if ( method & LIO_WAIT_ACTIVE ) {
        if ( Debug_level > 2 )
            printf("DEBUG %s/%d: wait method : active\n", __FILE__, __LINE__);
#ifdef CRAY
        sigon();
	/*
         * loop until sw_flag, sw_count or sw_error field elements
	 * change to non-zero.
 	 */
        cnt=0;
        while ( (*statptr)->sw_flag == 0 &&
		(*statptr)->sw_count == 0 &&
		(*statptr)->sw_error == 0 ) {
	   cnt++;
	}
#else
	/* loop while aio_error() returns EINPROGRESS */
	cnt=0;
	while(1){
		ret = aio_error( aiocbp );
		if( (ret == 0) || (ret != EINPROGRESS) ){
			break;
		}
		++cnt;
	}

#endif
	if ( Debug_level > 5 && cnt && (cnt % 50) == 0 )
		printf("DEBUG %s/%d: wait active cnt = %d\n",
		    __FILE__, __LINE__, cnt);

    } else if ( method & LIO_WAIT_SIGPAUSE ) {
        if ( Debug_level > 2 )
            printf("DEBUG %s/%d: wait method : sigpause\n", __FILE__, __LINE__);
#ifdef sgi
	/* note: don't do the sigon() for CRAY in this case.  why? -- roehrich 6/11/97 */
	if( aiocbp->aio_sigevent.sigev_notify == SIGEV_SIGNAL )
		sigrelse( aiocbp->aio_sigevent.sigev_signo );
	else {
		printf("DEBUG %s/%d: sigev_notify != SIGEV_SIGNAL\n", __FILE__, __LINE__ );
		return -1;
	}
#endif
        pause();

    } else if ( method & LIO_WAIT_SIGACTIVE ) {
        if ( Debug_level > 2 )
            printf("DEBUG %s/%d: wait method : sigactive\n", __FILE__, __LINE__);
#ifdef CRAY
        sigon();
#else
	if( aiocbp->aio_sigevent.sigev_notify == SIGEV_SIGNAL )
		sigrelse( aiocbp->aio_sigevent.sigev_signo );
	else {
		printf("DEBUG %s/%d: sigev_notify != SIGEV_SIGNAL\n", __FILE__, __LINE__ );
		return -1;
	}
#endif
	/* loop waiting for signal */
        while ( Received_signal == Rec_signal ){
#ifdef CRAY
                sigon();
#else
		sigrelse( aiocbp->aio_sigevent.sigev_signo );
#endif
	}

    } else if ( method & LIO_WAIT_NONE ) {
        if ( Debug_level > 2 )
            printf("DEBUG %s/%d: wait method : none\n", __FILE__, __LINE__);
	/* It's broken because the aiocb/iosw is an automatic variable in
	 * lio_{read,write}_buffer, so when the function returns and the
	 * I/O completes there will be nowhere to write the I/O status.
	 * It doesn't cause a problem on unicos--probably because of some
	 * compiler quirk, or an accident.  It causes POSIX async I/O
	 * to core dump some threads.   spr/pv 705909.  6/27/97 roehrich
	 */
	sprintf(Errormsg, "%s/%d LIO_WAIT_NONE was selected (this is broken)\n",
		__FILE__, __LINE__ );
#ifdef CRAY
        sigon();
#endif
/*        return 1;*/
        return -1;
    }
    else {
	if( Debug_level > 2 )
	    printf("DEBUG %s/%d: no wait method was chosen\n", __FILE__, __LINE__ );
	return -1;
    }

    return 0;

} /* end of lio_wait4asyncio */

#endif /* ifndef linux */
#endif

#if UNIT_TEST
/***********************************************************************
 * The following code is provided as unit test.
 * Just define add "-DUNIT_TEST=1" to the cc line.
 *
 * (rrl 04/96)
 ***********************************************************************/
struct unit_info_t {
    int method;
    int sig;
    char *str;
}  Unit_info[] = {
    { LIO_IO_SYNC, 0, "sync io" },
    { LIO_IO_SYNCV, 0, "sync readv/writev" },
    { LIO_IO_SYNCP, 0, "sync pread/pwrite" },
    { LIO_IO_ASYNC, 0, "async io, def wait" },
    { LIO_IO_SLISTIO,     0, "sync listio" },
    { LIO_IO_ALISTIO,     0, "async listio, def wait" },
    { LIO_IO_ASYNC|LIO_WAIT_ACTIVE, 	0, "async active" },
    { LIO_IO_ASYNC|LIO_WAIT_RECALL, 	0, "async recall/suspend" },
    { LIO_IO_ASYNC|LIO_WAIT_SIGPAUSE, 	SIGUSR1, "async sigpause" },
    { LIO_IO_ASYNC|LIO_WAIT_SIGACTIVE, 	SIGUSR1, "async sigactive" },
    { LIO_IO_ALISTIO|LIO_WAIT_ACTIVE,     0, "async listio active" },
    { LIO_IO_ALISTIO|LIO_WAIT_RECALL,     0, "async listio recall" },
    { LIO_IO_ALISTIO|LIO_WAIT_SIGACTIVE,  SIGUSR1, "async listio sigactive" },
    { LIO_IO_ALISTIO|LIO_WAIT_SIGPAUSE,  SIGUSR1, "async listio sigpause" },
    { LIO_IO_ASYNC, 	SIGUSR2, "async io, def wait, sigusr2" },
    { LIO_IO_ALISTIO,   SIGUSR2, "async listio, def wait, sigusr2" },
};

int
main(argc, argv)
int argc;
char **argv;
{
    extern char *optarg;
    extern int optind;

    int fd;
    char *err;
    char buffer[4096];
    int size=4096;
    int ret;
    int ind;
    int iter=3;
    int method;
    int exit_status = 0;
    int c;
    int i;
    char *symbols = NULL;
    int die_on_err = 0;

    while( (c = getopt(argc,argv,"s:di:")) != -1 ){
	switch(c){
	case 's': symbols = optarg; break;
	case 'd': ++die_on_err; break;
	case 'i': iter = atoi(optarg); break;
	}
    }

    if ((fd=open("unit_test_file", O_CREAT|O_RDWR|O_TRUNC, 0777)) == -1 ) {
	perror("open(unit_test_file, O_CREAT|O_RDWR|O_TRUNC, 0777) failed");
	exit(1);
    }

    Debug_level=9;

    if ( symbols != NULL ) {
        if ( (method=lio_parse_io_arg2(symbols,  &err)) == -1 ){
	    printf("lio_parse_io_arg2(%s, &err) failed, bad token starting at %s\n",
	    symbols, err);
	    if( die_on_err )
		exit(1);
	}
	else
	    printf("lio_parse_io_arg2(%s, &err) returned %#o\n", symbols, method);

	exit_status = 0;
        for(ind=0; ind < iter; ind++ ) {
	  memset( buffer, 'A', 4096 );
	  if( lseek(fd, 0, 0) == -1 ){
		printf("lseek(fd,0,0), %d, failed, errno %d\n",
		       __LINE__, errno );
		++exit_status;
	  }
          if ((ret=lio_write_buffer(fd, method, buffer,
                        size, SIGUSR1, &err, 0)) != size ) {
            printf("lio_write_buffer returned -1, err = %s\n", err);
          } else
            printf("lio_write_buffer returned %d\n", ret);

	  memset( buffer, 'B', 4096 );
          if( lseek(fd, 0, 0) == -1 ){
		printf("lseek(fd,0,0), %d, failed, errno %d\n",
		       __LINE__, errno );
		++exit_status;
	  }
          if ((ret=lio_read_buffer(fd, method, buffer,
                        size, SIGUSR2, &err, 0)) != size ) {
            printf("lio_read_buffer returned -1, err = %s\n", err);
          } else
            printf("lio_read_buffer returned %d\n", ret);

	  for( i = 0; i < 4096; ++i ){
		if( buffer[i] != 'A' ){
			printf("  buffer[%d] = %d\n", i, buffer[i] );
			++exit_status;
			break;
		}
	  }

	  if( exit_status )
		exit(exit_status);

	}

        unlink("unit_test_file");
	exit(0);
    }

    for(ind=0; ind < sizeof(Unit_info)/sizeof(struct unit_info_t); ind++ ) {

	printf("\n********* write %s ***************\n", Unit_info[ind].str);
	if( lseek(fd, 0, 0) == -1 ){
		printf("lseek(fd,0,0), %d, failed, errno %d\n",
		       __LINE__, errno );
		++exit_status;
	}

	memset( buffer, 'A', 4096 );
        if ((ret=lio_write_buffer(fd, Unit_info[ind].method, buffer,
			size, Unit_info[ind].sig, &err, 0)) != size ) {
	    printf(">>>>> lio_write_buffer(fd,0%x,buffer,%d,%d,err,0) returned -1,\n   err = %s\n",
		   Unit_info[ind].method, size, Unit_info[ind].sig, err);
	    ++exit_status;
	    if( die_on_err )
		exit(exit_status);
        } else{
	    printf("lio_write_buffer returned %d\n", ret);
	}

	printf("\n********* read %s ***************\n", Unit_info[ind].str);
	if( lseek(fd, 0, 0) == -1 ){
		printf("lseek(fd,0,0), %d, failed, errno %d\n",
		       __LINE__, errno );
		++exit_status;
	}
	memset( buffer, 'B', 4096 );
        if ((ret=lio_read_buffer(fd, Unit_info[ind].method, buffer,
			size, Unit_info[ind].sig, &err, 0)) != size ) {
	    printf(">>>>> lio_read_buffer(fd,0%x,buffer,%d,%d,err,0) returned -1,\n   err = %s\n",
		   Unit_info[ind].method, size, Unit_info[ind].sig, err);
	    ++exit_status;
	    if( die_on_err )
		exit(exit_status);
        } else {
	    printf("lio_read_buffer returned %d\n", ret);
	}

	  for( i = 0; i < 4096; ++i ){
		if( buffer[i] != 'A' ){
			printf("  buffer[%d] = %d\n", i, buffer[i] );
			++exit_status;
			if( die_on_err )
				exit(exit_status);
			break;
		}
	  }

	fflush(stdout);
	fflush(stderr);
	sleep(1);

    }

    unlink("unit_test_file");

    exit(exit_status);
}
#endif