#!/bin/sh


# 
#  07/10/02 - Jeff Martin - martinjn@us.ibm.com: Added instance and 
#                           time command line options
#
#  12/15/02 - Manoj Iyer  - manjo@mail.utexas.edu: Added options to run 
#                           LTP under CPU, IO and MM load.
#
#  01/26/03 - Manoj Iyer  - manjo@mail.utexas.edu: Added -f option; Execute
#                           user defined set of testcases.
#
#  01/27/03 - Manoj Iyer  - manjo@mail.utexas.edu: Enabled formatted printing
#                           of logfiles.
#
#  01/28/03 - Manoj Iyer  - manjo@mail.utexas.edu: added option to enable 
#                           formatted printing of logfiles.
#   
#  01/29/03 - Manoj Iyer  - manjo@mail.utexas.edu: merged networktests.sh with
#                           this script, added the -n option to run these
#                           tests. Also, added -h option to print help messages.
#                          
#  01/29/03 - Manoj Iyer  - manjo@mail.utexas.edu: 
#                           added code to cause pan to print less verbose 
#                           output.
#  02/01/03 - Manoj Iyer  - manjo@mail.utexas.edu: Removed variables
#                           initialization of RHOST and PASSWD.
#
#  02/05/03 - Robbie Williamson - Added configurability to the optional load
#                                 generator sections.  Also added network traffic
#				  option.
#
#  04/23/03 - Robbie Williamson - Added "-o" option and ability to set network
#				  testing variables RHOST and PASSWD.
#

cd `dirname $0`
export LTPROOT=${PWD}
export TMPBASE="/tmp"
export TMP="${TMPBASE}/runalltests-$$"
export PATH="${PATH}:${LTPROOT}/testcases/bin"
cmdfile=""
pretty_prt=" "
alt_dir=0
run_netest=0
quiet_mode=" "
NetPipe=0
GenLoad=0

usage() 
{
	cat <<-END >&2
    usage: ./${0##*/} -c [-d tmpdir] [-f cmdfile ] [-i # (in Mb)] [ -l logfile ] [ -o outputfile ] 
                  [ -m # (in Mb)] -N -n -q [ -r ltproot ] [ -t duration ] [ -x instances ] 
                
    -c              Run LTP under additional background CPU load.
    -d tmpdir       Directory where temporary files will be created.
    -f cmdfile      Execute user defined list of testcases.
    -h              Help. Prints all available options.
    -i # (in Mb)    Run LTP with a _minimum_ IO load of # megabytes in background.
    -l logfile      Log results of test in a logfile.
    -m # (in Mb)    Run LTP with a _minimum_ memory load of # megabytes in background.
    -N              Run all the networking tests. 
    -n              Run LTP with network traffic in background.
    -o outputfile   Redirect test output to a file.
    -p              Human readable format logfiles. 
    -q              Print less verbose output to screen.
    -r ltproot      Fully qualified path where testsuite is installed.
    -t duration     Execute the testsuite for given duration. Examples:
                      -t 60s = 60 seconds
                      -t 45m = 45 minutes
                      -t 24h = 24 hours
                      -t 2d  = 2 days
                     
    -x instances    Run multiple instances of this testsuite.

    example: ./${0##*/} -i 1024 -m 128 -p -q  -l /tmp/resultlog.$$ -d ${PWD}

    NOTE: If you do not wish to learn these options use the "runltp" program instead.
	END
exit
}

mkdir -p ${TMP}

cd ${TMP}
if [ $? -ne 0 ]; then
  echo "could not cd ${TMP} ... exiting"
  exit
fi

while getopts cd:f:hi:l:m:Nno:pqr:t:x: arg
do  case $arg in
    c)	   
            $LTPROOT/testcases/bin/genload --cpu 1 2>&1 1>/dev/null &
	    GenLoad=1 ;;
                
    d)      # append $$ to TMP, as it is recursively 
            # removed at end of script.
            TMPBASE=$OPTARG;;
    f)        # Execute user defined set of testcases.
            cmdfile=$OPTARG;;

    h)	    usage;;
    
    i)        
            bytesize=$(($OPTARG * 1024 * 1024))
            $LTPROOT/testcases/bin/genload --io 1 2>&1 1>/dev/null &
            $LTPROOT/testcases/bin/genload --hdd 0 --hdd-bytes $bytesize \
            2>&1 1>/dev/null & 
	    GenLoad=1 ;;

    l)      
	    case $OPTARG in
		/*)	
			logfile="-l $OPTARG" ;;
		*)
			if [ ! -d $LTPROOT/results ]; then
				mkdir -p $LTPROOT/results
				if [ $? -ne 0 ]; then
					echo "ERROR: failed to create $LTPROOT/results"
					exit 1
				fi
			fi
			logfile="-l $LTPROOT/results/$OPTARG"
			alt_dir=1 ;;
	    esac ;;

    m)      
            memsize=$(($OPTARG * 1024 * 1024)) 
	    $LTPROOT/testcases/bin/genload  --vm 0 --vm-bytes $memsize\
            2>&1 1>/dev/null & 
	    GenLoad=1;;

    N)	    run_netest=1;;

    n)	    $LTPROOT/testcases/bin/netpipe.sh
	    NetPipe=1;;

    o)      outputfile="-o $OPTARG" ;;

    p)      pretty_prt=" -p ";;

    q)      quiet_mode=" -q ";;

    r)      LTPROOT=$OPTARG;;

    t)      # In case you want to specify the time 
            # to run from the command line 
            # (2m = two minutes, 2h = two hours, etc)
            duration="-t $OPTARG" ;;

    x)      # number of ltp's to run
	    echo "WARNING: The use of -x can cause unpredictable failures, as a"
	    echo "         result of concurrently running multiple tests designed"
	    echo "         to be ran exclusively."
	    echo ""
	    echo "Pausing for 10 seconds..."
	    sleep 10 
            instances="-x $OPTARG -O ${TMP}";;

    \?)     usage;;
    esac
done

if [ $run_netest -eq 1 ]
then
	if [ -z $RHOST ] || [ -z $PASSWD ]
	then
		if [ -z $RHOST ]
		then
			echo " "
			echo "Please enter RHOST = 'name of the remote host machine'"
			echo -n "-> "
			read RHOST
		fi
		if [ -z $PASSWD ]
		then
			echo " "
			echo "Please enter PASSWD = 'root passwd of the remote host machine'"
			echo -n "-> "
			read PASSWD
		fi
	fi
	export $RHOST
	export $PASSWD
fi
	

# If user does not provide a command file select a default set of testcases
# to execute.
if [ -z $cmdfile ]
then
    cat ${LTPROOT}/runtest/syscalls ${LTPROOT}/runtest/fs ${LTPROOT}/runtest/fsx ${LTPROOT}/runtest/dio ${LTPROOT}/runtest/mm ${LTPROOT}/runtest/ipc ${LTPROOT}/runtest/sched ${LTPROOT}/runtest/math ${LTPROOT}/runtest/pty > ${TMP}/alltests
else
    cat $cmdfile > ${TMP}/alltests
fi

if [ $run_netest -eq 1 ]
then
	cat ${LTPROOT}/runtest/tcp_cmds >> ${TMP}/alltests
	cat ${LTPROOT}/runtest/multicast >> ${TMP}/alltests
	cat ${LTPROOT}/runtest/rpc >> ${TMP}/alltests
	cat ${LTPROOT}/runtest/nfs >> ${TMP}/alltests
fi

# The fsx-linux tests use the SCRATCHDEV environment variable as a location
# that can be reformatted and run on.  Set SCRATCHDEV if you want to run 
# these tests.  As a safeguard, this is disabled.
unset SCRATCHDEV
if [ -n "$SCRATCHDEV" ]; then
  cat ${LTPROOT}/runtest/fsx >> ${TMP}/alltests
fi

# check for required users and groups
${LTPROOT}/IDcheck.sh

# display versions of installed software
${LTPROOT}/ver_linux

${LTPROOT}/pan/pan $quiet_mode -e -S $instances $duration -a $$ -n $$ $pretty_prt -f ${TMP}/alltests $logfile $outputfile 

if [ $? -eq 0 ]; then
  echo pan reported PASS
else
  echo pan reported FAIL
fi

if [ $GenLoad -eq 1 ]
then
	killall -9 genload
fi 

if [ $NetPipe -eq 1 ]
then
	killall -9 NPtcp
fi

if [ $alt_dir -eq 1 ]
then
	echo " "
	echo "###############################################################"
	echo " "
	echo " Done executing testcases."
	echo " result log is in the $LTPROOT/results directory"
	echo " "
	echo "###############################################################"
	echo " "
fi
rm -rf ${TMP}