| #!/bin/sh |
| # Before running this script please ensure that your PATH is |
| # typical as you use for compilation/istallation. I use |
| # /bin /sbin /usr/bin /usr/sbin /usr/local/bin, but it may |
| # differ on your system. |
| |
| PATH=/sbin:/usr/sbin:/bin:/usr/bin:$PATH |
| |
| tst_cmd_available() |
| { |
| if type command > /dev/null 2>&1; then |
| command -v $1 > /dev/null 2>&1 || return 1 |
| else |
| which $1 > /dev/null 2>&1 |
| if [ $? -eq 0 ]; then |
| return 0 |
| else |
| return 1 |
| fi |
| fi |
| } |
| |
| tst_cmd_run() |
| { |
| local cmd="$1" |
| shift |
| tst_cmd_available $cmd && eval "$cmd $@" |
| } |
| |
| is_enabled() |
| { |
| [ -f "$1" ] && [ "$(cat $1)" = "Y" -o "$(cat $1)" = "1" ] |
| } |
| |
| echo 'If some fields are empty or look unusual you may have an old version.' |
| echo 'Compare to the current minimal requirements in Documentation/Changes.' |
| |
| echo |
| echo "`ls /etc/*release 2> /dev/null`" |
| cat /etc/*release 2> /dev/null |
| if [ $? = 1 ]; then |
| echo "`ls /usr/lib/*release 2> /dev/null`" |
| cat /usr/lib/*release 2> /dev/null |
| fi |
| if [ $? = 1 ]; then |
| echo '/etc/issue:' |
| cat /etc/issue 2> /dev/null |
| fi |
| if [ $? = 1 ]; then |
| echo 'lsb_release -a' |
| lsb_release -a 2> /dev/null |
| fi |
| |
| echo |
| echo 'uname:' |
| uname -a |
| |
| echo |
| echo '/proc/cmdline' |
| cat /proc/cmdline |
| |
| echo |
| |
| echo "Gnu C " `gcc --version 2>/dev/null | head -n 1` |
| echo "Clang " `clang --version 2>/dev/null | head -n 1` |
| |
| make --version 2>&1 | awk -F, '{print $1}' | awk \ |
| '/GNU Make/{print "Gnu make ",$NF}' |
| |
| ld -v 2>&1 | awk -F\) '{print $1}' | awk \ |
| '/BFD/{print "binutils ",$NF}' |
| |
| mkswap -V 2>&1 | awk '{print "util-linux ", $NF}' |
| |
| mount --version 2>&1 | awk -F\- '{print "mount ", $NF}' |
| |
| insmod -V 2>&1 | awk 'NR==1 {print "modutils ",$NF}' |
| |
| tune2fs 2>&1 | grep "^tune2fs" | sed 's/,//' | awk \ |
| 'NR==1 {print "e2fsprogs ", $2}' |
| |
| reiserfsck 2>&1 | grep reiserfsprogs | awk \ |
| 'NR==1{print "reiserfsprogs ", $NF}' |
| |
| cardmgr -V 2>&1| grep version | awk \ |
| 'NR==1{print "pcmcia-cs ", $3}' |
| |
| pppd --version 2>&1| grep version | awk \ |
| 'NR==1{print "PPP ", $3}' |
| |
| isdnctrl 2>&1 | grep version | awk \ |
| 'NR==1{print "isdn4k-utils ", $NF}' |
| |
| ls -l `ldd /bin/sh | awk '/libc/{print $3}'` | sed \ |
| -e 's/\.so$//' | awk -F'[.-]' '{print "Linux C Library " \ |
| $(NF-2)"."$(NF-1)"."$NF}' |
| |
| ldd -v > /dev/null 2>&1 && ldd -v || ldd --version |head -n 1 | awk \ |
| 'NR==1{print "Dynamic linker (ldd) ", $NF}' |
| |
| ls -l /usr/lib/lib{g,stdc}++.so 2>/dev/null | awk -F. \ |
| '{print "Linux C++ Library " $4"."$5"."$6}' |
| |
| ps --version 2>&1 | awk 'NR==1{print "Procps ", $NF}' |
| |
| ifconfig --version 2>&1 | grep tools | awk \ |
| 'NR==1{print "Net-tools ", $NF}' |
| |
| ip -V 2>&1 | awk \ |
| 'NR==1{print "iproute2 ", $NF}' |
| |
| ping -V 2>&1 | awk \ |
| 'NR==1{print "iputils ", $NF}' |
| |
| ethtool --version | grep version 2>&1 | awk \ |
| 'NR==1{print "ethtool ", $NF}' |
| |
| # Kbd needs 'loadkeys -h', |
| loadkeys -h 2>&1 | awk \ |
| '(NR==1 && ($3 !~ /option/)) {print "Kbd ", $3}' |
| |
| # while console-tools needs 'loadkeys -V'. |
| loadkeys -V 2>&1 | awk \ |
| '(NR==1 && ($2 ~ /console-tools/)) {print "Console-tools ", $3}' |
| |
| expr --v 2>&1 | awk 'NR==1{print "Sh-utils ", $NF}' |
| |
| if [ -e /proc/modules ]; then |
| X=`cat /proc/modules | sed -e "s/ .*$//"` |
| echo "Modules Loaded "$X |
| fi |
| |
| echo |
| echo 'free reports:' |
| free |
| |
| echo |
| echo 'cpuinfo:' |
| tst_cmd_run lscpu || cat /proc/cpuinfo |
| |
| echo |
| if is_enabled /sys/module/apparmor/parameters/enabled; then |
| echo 'AppArmor enabled' |
| tst_cmd_run aa-status |
| else |
| echo 'AppArmor disabled' |
| fi |
| |
| echo |
| |
| if ! tst_cmd_run sestatus; then |
| printf 'SELinux mode: ' |
| tst_cmd_run getenforce || echo 'unknown' |
| fi |