| language: c |
| |
| sudo: false |
| dist: trusty |
| |
| cache: |
| apt: true |
| ccache: true |
| |
| env: |
| global: |
| - XORG_RELEASES=http://xorg.freedesktop.org/releases/individual |
| - XCB_RELEASES=http://xcb.freedesktop.org/dist |
| - XORGMACROS_VERSION=util-macros-1.19.0 |
| - GLPROTO_VERSION=glproto-1.4.17 |
| - DRI2PROTO_VERSION=dri2proto-2.8 |
| - LIBPCIACCESS_VERSION=libpciaccess-0.13.4 |
| - LIBDRM_VERSION=libdrm-2.4.74 |
| - XCBPROTO_VERSION=xcb-proto-1.11 |
| - LIBXCB_VERSION=libxcb-1.11 |
| - LIBXSHMFENCE_VERSION=libxshmfence-1.2 |
| - LIBTXC_DXTN_VERSION=libtxc_dxtn-1.0.1 |
| - LIBVDPAU_VERSION=libvdpau-1.1 |
| - LIBVA_VERSION=libva-1.6.2 |
| - LIBWAYLAND_VERSION=wayland-1.11.1 |
| - PKG_CONFIG_PATH=$HOME/prefix/lib/pkgconfig |
| - LD_LIBRARY_PATH="$HOME/prefix/lib:$LD_LIBRARY_PATH" |
| |
| matrix: |
| include: |
| - env: |
| - LABEL="make loaders/classic DRI" |
| - BUILD=make |
| - MAKEFLAGS="-j4" |
| - MAKE_CHECK_COMMAND="make check" |
| - DRI_LOADERS="--enable-glx --enable-gbm --enable-egl --with-platforms=x11,drm,surfaceless,wayland --enable-osmesa" |
| - DRI_DRIVERS="i915,i965,radeon,r200,swrast,nouveau" |
| - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa" |
| - GALLIUM_DRIVERS="" |
| - VULKAN_DRIVERS="" |
| addons: |
| apt: |
| packages: |
| - xz-utils |
| - x11proto-xf86vidmode-dev |
| - libexpat1-dev |
| - libx11-xcb-dev |
| - env: |
| # NOTE: Building SWR is 2x (yes two) times slower than all the other |
| # gallium drivers combined. |
| # Start this early so that it doesn't hunder the run time. |
| - LABEL="make Gallium Drivers SWR" |
| - BUILD=make |
| - MAKEFLAGS="-j4" |
| - MAKE_CHECK_COMMAND="true" |
| - LLVM_VERSION=3.9 |
| - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" |
| - OVERRIDE_CC="gcc-5" |
| - OVERRIDE_CXX="g++-5" |
| - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl" |
| - DRI_DRIVERS="" |
| - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa" |
| - GALLIUM_DRIVERS="swr" |
| - VULKAN_DRIVERS="" |
| addons: |
| apt: |
| sources: |
| - ubuntu-toolchain-r-test |
| - llvm-toolchain-trusty-3.9 |
| packages: |
| # LLVM packaging is broken and misses these dependencies |
| - libedit-dev |
| # From sources above |
| - g++-5 |
| - llvm-3.9-dev |
| # Common |
| - xz-utils |
| - x11proto-xf86vidmode-dev |
| - libexpat1-dev |
| - libx11-xcb-dev |
| - libelf-dev |
| - env: |
| - LABEL="make Gallium Drivers Other" |
| - BUILD=make |
| - MAKEFLAGS="-j4" |
| - MAKE_CHECK_COMMAND="true" |
| - LLVM_VERSION=3.9 |
| - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" |
| - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl" |
| - DRI_DRIVERS="" |
| - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa" |
| - GALLIUM_DRIVERS="i915,nouveau,r300,r600,radeonsi,freedreno,svga,swrast,vc4,virgl,etnaviv,imx" |
| - VULKAN_DRIVERS="" |
| addons: |
| apt: |
| sources: |
| - llvm-toolchain-trusty-3.9 |
| packages: |
| # LLVM packaging is broken and misses these dependencies |
| - libedit-dev |
| # From sources above |
| - llvm-3.9-dev |
| # Common |
| - xz-utils |
| - x11proto-xf86vidmode-dev |
| - libexpat1-dev |
| - libx11-xcb-dev |
| - libelf-dev |
| - env: |
| # NOTE: Analogous to SWR above, building Clover is quite slow. |
| - LABEL="make Gallium ST Clover" |
| - BUILD=make |
| - MAKEFLAGS="-j4" |
| - MAKE_CHECK_COMMAND="true" |
| - LLVM_VERSION=3.6 |
| - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" |
| - OVERRIDE_CC=gcc-4.7 |
| - OVERRIDE_CXX=g++-4.7 |
| - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl" |
| - DRI_DRIVERS="" |
| - GALLIUM_ST="--disable-dri --enable-opencl --enable-opencl-icd --enable-llvm --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa" |
| # i915 most likely doesn't work with OpenCL. |
| # Regardless - we're doing a quick build test here. |
| - GALLIUM_DRIVERS="i915" |
| - VULKAN_DRIVERS="" |
| addons: |
| apt: |
| sources: |
| - llvm-toolchain-trusty-3.6 |
| packages: |
| - libclc-dev |
| # LLVM packaging is broken and misses these dependencies |
| - libedit-dev |
| - g++-4.7 |
| # From sources above |
| - llvm-3.6-dev |
| - clang-3.6 |
| - libclang-3.6-dev |
| # Common |
| - xz-utils |
| - x11proto-xf86vidmode-dev |
| - libexpat1-dev |
| - libx11-xcb-dev |
| - libelf-dev |
| - env: |
| - LABEL="make Gallium ST Other" |
| - BUILD=make |
| - MAKEFLAGS="-j4" |
| - MAKE_CHECK_COMMAND="true" |
| - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl" |
| - DRI_DRIVERS="" |
| - GALLIUM_ST="--enable-dri --disable-opencl --enable-xa --enable-nine --enable-xvmc --enable-vdpau --enable-va --enable-omx --enable-gallium-osmesa" |
| # We need swrast for osmesa and nine. |
| # i915 most likely doesn't work with most ST. |
| # Regardless - we're doing a quick build test here. |
| - GALLIUM_DRIVERS="i915,swrast" |
| - VULKAN_DRIVERS="" |
| addons: |
| apt: |
| packages: |
| # Nine requires gcc 4.6... which is the one we have right ? |
| - libxvmc-dev |
| # Build locally, for now. |
| #- libvdpau-dev |
| #- libva-dev |
| - libomxil-bellagio-dev |
| # LLVM packaging is broken and misses these dependencies |
| - libedit-dev |
| # Common |
| - xz-utils |
| - x11proto-xf86vidmode-dev |
| - libexpat1-dev |
| - libx11-xcb-dev |
| - libelf-dev |
| - env: |
| - LABEL="make Vulkan" |
| - BUILD=make |
| - MAKEFLAGS="-j4" |
| - MAKE_CHECK_COMMAND="make -C src/gtest check && make -C src/intel check" |
| - LLVM_VERSION=3.9 |
| - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" |
| - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl --with-platforms=x11,wayland" |
| - DRI_DRIVERS="" |
| - GALLIUM_ST="--enable-dri --enable-dri3 --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa" |
| - GALLIUM_DRIVERS="" |
| - VULKAN_DRIVERS="intel,radeon" |
| addons: |
| apt: |
| sources: |
| - llvm-toolchain-trusty-3.9 |
| packages: |
| # LLVM packaging is broken and misses these dependencies |
| - libedit-dev |
| # From sources above |
| - llvm-3.9-dev |
| # Common |
| - xz-utils |
| - x11proto-xf86vidmode-dev |
| - libexpat1-dev |
| - libx11-xcb-dev |
| - libelf-dev |
| - env: |
| - LABEL="scons" |
| - BUILD=scons |
| - SCONSFLAGS="-j4" |
| # Explicitly disable. |
| - SCONS_TARGET="llvm=0" |
| # Keep it symmetrical to the make build. |
| - SCONS_CHECK_COMMAND="scons llvm=0 check" |
| addons: |
| apt: |
| packages: |
| - scons |
| # Common |
| - xz-utils |
| - x11proto-xf86vidmode-dev |
| - libexpat1-dev |
| - libx11-xcb-dev |
| - libelf-dev |
| - env: |
| - LABEL="scons LLVM" |
| - BUILD=scons |
| - SCONSFLAGS="-j4" |
| - SCONS_TARGET="llvm=1" |
| # Keep it symmetrical to the make build. |
| - SCONS_CHECK_COMMAND="scons llvm=1 check" |
| - LLVM_VERSION=3.3 |
| - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" |
| addons: |
| apt: |
| packages: |
| - scons |
| # LLVM packaging is broken and misses these dependencies |
| - libedit-dev |
| - llvm-3.3-dev |
| # Common |
| - xz-utils |
| - x11proto-xf86vidmode-dev |
| - libexpat1-dev |
| - libx11-xcb-dev |
| - libelf-dev |
| - env: |
| - LABEL="scons SWR" |
| - BUILD=scons |
| - SCONSFLAGS="-j4" |
| - SCONS_TARGET="swr=1" |
| - LLVM_VERSION=3.9 |
| - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" |
| # Keep it symmetrical to the make build. There's no actual SWR, yet. |
| - SCONS_CHECK_COMMAND="true" |
| - OVERRIDE_CC="gcc-5" |
| - OVERRIDE_CXX="g++-5" |
| addons: |
| apt: |
| sources: |
| - ubuntu-toolchain-r-test |
| - llvm-toolchain-trusty-3.9 |
| packages: |
| - scons |
| # LLVM packaging is broken and misses these dependencies |
| - libedit-dev |
| # From sources above |
| - g++-5 |
| - llvm-3.9-dev |
| # Common |
| - xz-utils |
| - x11proto-xf86vidmode-dev |
| - libexpat1-dev |
| - libx11-xcb-dev |
| - libelf-dev |
| |
| install: |
| - pip install --user mako |
| |
| # Since libdrm gets updated in configure.ac regularly, try to pick up the |
| # latest version from there. |
| - for line in `grep "^LIBDRM.*_REQUIRED=" configure.ac`; do |
| old_ver=`echo $LIBDRM_VERSION | sed 's/libdrm-//'`; |
| new_ver=`echo $line | sed 's/.*REQUIRED=//'`; |
| if `echo "$old_ver,$new_ver" | tr ',' '\n' | sort -Vc 2> /dev/null`; then |
| export LIBDRM_VERSION="libdrm-$new_ver"; |
| fi; |
| done |
| |
| # Install dependencies where we require specific versions (or where |
| # disallowed by Travis CI's package whitelisting). |
| |
| - wget $XORG_RELEASES/util/$XORGMACROS_VERSION.tar.bz2 |
| - tar -jxvf $XORGMACROS_VERSION.tar.bz2 |
| - (cd $XORGMACROS_VERSION && ./configure --prefix=$HOME/prefix && make install) |
| |
| - wget $XORG_RELEASES/proto/$GLPROTO_VERSION.tar.bz2 |
| - tar -jxvf $GLPROTO_VERSION.tar.bz2 |
| - (cd $GLPROTO_VERSION && ./configure --prefix=$HOME/prefix && make install) |
| |
| - wget $XORG_RELEASES/proto/$DRI2PROTO_VERSION.tar.bz2 |
| - tar -jxvf $DRI2PROTO_VERSION.tar.bz2 |
| - (cd $DRI2PROTO_VERSION && ./configure --prefix=$HOME/prefix && make install) |
| |
| - wget $XCB_RELEASES/$XCBPROTO_VERSION.tar.bz2 |
| - tar -jxvf $XCBPROTO_VERSION.tar.bz2 |
| - (cd $XCBPROTO_VERSION && ./configure --prefix=$HOME/prefix && make install) |
| |
| - wget $XCB_RELEASES/$LIBXCB_VERSION.tar.bz2 |
| - tar -jxvf $LIBXCB_VERSION.tar.bz2 |
| - (cd $LIBXCB_VERSION && ./configure --prefix=$HOME/prefix && make install) |
| |
| - wget $XORG_RELEASES/lib/$LIBPCIACCESS_VERSION.tar.bz2 |
| - tar -jxvf $LIBPCIACCESS_VERSION.tar.bz2 |
| - (cd $LIBPCIACCESS_VERSION && ./configure --prefix=$HOME/prefix && make install) |
| |
| - wget http://dri.freedesktop.org/libdrm/$LIBDRM_VERSION.tar.bz2 |
| - tar -jxvf $LIBDRM_VERSION.tar.bz2 |
| - (cd $LIBDRM_VERSION && ./configure --prefix=$HOME/prefix --enable-vc4 --enable-freedreno --enable-etnaviv-experimental-api && make install) |
| |
| - wget $XORG_RELEASES/lib/$LIBXSHMFENCE_VERSION.tar.bz2 |
| - tar -jxvf $LIBXSHMFENCE_VERSION.tar.bz2 |
| - (cd $LIBXSHMFENCE_VERSION && ./configure --prefix=$HOME/prefix && make install) |
| |
| # libtxc-dxtn uses the patented S3 Texture Compression |
| # algorithm. Therefore, we don't want to use this library but it is |
| # still possible through setting the USE_TXC_DXTN variable to yes in |
| # the travis web UI. |
| # |
| # According to Wikipedia, the patent expires on October 2, 2017: |
| # https://en.wikipedia.org/wiki/S3_Texture_Compression#Patent |
| - if test "x$USE_TXC_DXTN" = xyes; then |
| wget https://people.freedesktop.org/~cbrill/libtxc_dxtn/$LIBTXC_DXTN_VERSION.tar.bz2; |
| tar -jxvf $LIBTXC_DXTN_VERSION.tar.bz2; |
| (cd $LIBTXC_DXTN_VERSION && ./configure --prefix=$HOME/prefix && make install); |
| fi |
| |
| - wget http://people.freedesktop.org/~aplattner/vdpau/$LIBVDPAU_VERSION.tar.bz2 |
| - tar -jxvf $LIBVDPAU_VERSION.tar.bz2 |
| - (cd $LIBVDPAU_VERSION && ./configure --prefix=$HOME/prefix && make install) |
| |
| - wget http://www.freedesktop.org/software/vaapi/releases/libva/$LIBVA_VERSION.tar.bz2 |
| - tar -jxvf $LIBVA_VERSION.tar.bz2 |
| - (cd $LIBVA_VERSION && ./configure --prefix=$HOME/prefix --disable-wayland --disable-dummy-driver && make install) |
| |
| - wget http://wayland.freedesktop.org/releases/$LIBWAYLAND_VERSION.tar.xz |
| - tar -axvf $LIBWAYLAND_VERSION.tar.xz |
| - (cd $LIBWAYLAND_VERSION && ./configure --prefix=$HOME/prefix --enable-libraries --without-host-scanner --disable-documentation --disable-dtd-validation && make install) |
| |
| # Generate the header since one is missing on the Travis instance |
| - mkdir -p linux |
| - printf "%s\n" \ |
| "#ifndef _LINUX_MEMFD_H" \ |
| "#define _LINUX_MEMFD_H" \ |
| "" \ |
| "#define __NR_memfd_create 319" \ |
| "#define SYS_memfd_create __NR_memfd_create" \ |
| "" \ |
| "#define MFD_CLOEXEC 0x0001U" \ |
| "#define MFD_ALLOW_SEALING 0x0002U" \ |
| "" \ |
| "#endif /* _LINUX_MEMFD_H */" > linux/memfd.h |
| |
| script: |
| - if test "x$BUILD" = xmake; then |
| test -n "$OVERRIDE_CC" && export CC="$OVERRIDE_CC"; |
| test -n "$OVERRIDE_CXX" && export CXX="$OVERRIDE_CXX"; |
| export CC="$CC -isystem`pwd`"; |
| |
| ./autogen.sh --enable-debug |
| $DRI_LOADERS |
| --with-dri-drivers=$DRI_DRIVERS |
| $GALLIUM_ST |
| --with-gallium-drivers=$GALLIUM_DRIVERS |
| --with-vulkan-drivers=$VULKAN_DRIVERS |
| --disable-llvm-shared-libs |
| && |
| make && eval $MAKE_CHECK_COMMAND; |
| fi |
| |
| - if test "x$BUILD" = xscons; then |
| test -n "$OVERRIDE_CC" && export CC="$OVERRIDE_CC"; |
| test -n "$OVERRIDE_CXX" && export CXX="$OVERRIDE_CXX"; |
| scons $SCONS_TARGET && eval $SCONS_CHECK_COMMAND; |
| fi |