.gitlab-ci/deqp-runner.sh - platform/external/mesa3d - Gitiles

 #!/bin/sh

 set -ex

 DEQP_OPTIONS="$DEQP_OPTIONS --deqp-surface-width=256 --deqp-surface-height=256"
 DEQP_OPTIONS="$DEQP_OPTIONS --deqp-surface-type=pbuffer"
 DEQP_OPTIONS="$DEQP_OPTIONS --deqp-gl-config-name=rgba8888d24s8ms0"
 DEQP_OPTIONS="$DEQP_OPTIONS --deqp-visibility=hidden"

 # deqp's shader cache (for vulkan) is not multiprocess safe for a common
 # filename, see:
 # https://gitlab.freedesktop.org/mesa/parallel-deqp-runner/-/merge_requests/13
 DEQP_OPTIONS="$DEQP_OPTIONS --deqp-shadercache=disable"

 if [ -z "$DEQP_VER" ]; then
    echo 'DEQP_VER must be set to something like "gles2", "gles31" or "vk" for the test run'
    exit 1
 fi

 if [ "$DEQP_VER" = "vk" ]; then
    if [ -z "$VK_DRIVER" ]; then
       echo 'VK_DRIVER must be to something like "radeon" or "intel" for the test run'
       exit 1
    fi
 fi

 if [ -z "$DEQP_SKIPS" ]; then
    echo 'DEQP_SKIPS must be set to something like "deqp-default-skips.txt"'
    exit 1
 fi

 INSTALL=`pwd`/install

 # Set up the driver environment.
 export LD_LIBRARY_PATH=`pwd`/install/lib/
 export EGL_PLATFORM=surfaceless
 export VK_ICD_FILENAMES=`pwd`/install/share/vulkan/icd.d/"$VK_DRIVER"_icd.`uname -m`.json

 # the runner was failing to look for libkms in /usr/local/lib for some reason
 # I never figured out.
 export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib

 RESULTS=`pwd`/results
 mkdir -p $RESULTS

 # Generate test case list file.
 if [ "$DEQP_VER" = "vk" ]; then
    cp /deqp/mustpass/vk-master.txt /tmp/case-list.txt
    DEQP=/deqp/external/vulkancts/modules/vulkan/deqp-vk
 elif [ "$DEQP_VER" = "gles2" -o "$DEQP_VER" = "gles3" -o "$DEQP_VER" = "gles31" ]; then
    cp /deqp/mustpass/$DEQP_VER-master.txt /tmp/case-list.txt
    DEQP=/deqp/modules/$DEQP_VER/deqp-$DEQP_VER
    SUITE=dEQP
 else
    cp /deqp/mustpass/$DEQP_VER-master.txt /tmp/case-list.txt
    DEQP=/deqp/external/openglcts/modules/glcts
    SUITE=KHR
 fi

 # If the job is parallel, take the corresponding fraction of the caselist.
 # Note: N~M is a gnu sed extension to match every nth line (first line is #1).
 if [ -n "$CI_NODE_INDEX" ]; then
    sed -ni $CI_NODE_INDEX~$CI_NODE_TOTAL"p" /tmp/case-list.txt
 fi

 if [ -n "$DEQP_CASELIST_FILTER" ]; then
     sed -ni "/$DEQP_CASELIST_FILTER/p" /tmp/case-list.txt
 fi

 if [ ! -s /tmp/case-list.txt ]; then
     echo "Caselist generation failed"
     exit 1
 fi

 if [ -n "$DEQP_EXPECTED_FAILS" ]; then
     XFAIL="--xfail-list $INSTALL/$DEQP_EXPECTED_FAILS"
 fi

 set +e

 if [ -n "$DEQP_PARALLEL" ]; then
    JOB="--job $DEQP_PARALLEL"
 elif [ -n "$FDO_CI_CONCURRENT" ]; then
    JOB="--job $FDO_CI_CONCURRENT"
 else
    JOB="--job 4"
 fi

 run_cts() {
     deqp=$1
     caselist=$2
     output=$3
     deqp-runner \
         --deqp $deqp \
         --output $output \
         --caselist $caselist \
         --exclude-list $INSTALL/$DEQP_SKIPS \
         --compact-display false \
         $XFAIL \
         $JOB \
 	--allow-flakes true \
 	$DEQP_RUNNER_OPTIONS \
         -- \
         $DEQP_OPTIONS
 }

 report_flakes() {
     if [ -z "$FLAKES_CHANNEL" ]; then
         return 0
     fi
     flakes=$1
     # The nick needs to be something unique so that multiple runners
     # connecting at the same time don't race for one nick and get blocked.
     # freenode has a 16-char limit on nicks (9 is the IETF standard, but
     # various servers extend that).  So, trim off the common prefixes of the
     # runner name, and append the job ID so that software runners with more
     # than one concurrent job (think swrast) don't collide.  For freedreno,
     # that gives us a nick as long as db410c-N-JJJJJJJJ, and it'll be a while
     # before we make it to 9-digit jobs (we're at 7 so far).
     runner=`echo $CI_RUNNER_DESCRIPTION | sed 's|mesa-||' | sed 's|google-freedreno-||g'`
     bot="$runner-$CI_JOB_ID"
     channel="$FLAKES_CHANNEL"
     (
     echo NICK $bot
     echo USER $bot unused unused :Gitlab CI Notifier
     sleep 10
     echo "JOIN $channel"
     sleep 1
     desc="Flakes detected in job: $CI_JOB_URL on $CI_RUNNER_DESCRIPTION"
     if [ -n "$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME" ]; then
         desc="$desc on branch $CI_MERGE_REQUEST_SOURCE_BRANCH_NAME ($CI_MERGE_REQUEST_TITLE)"
     elif [ -n "$CI_COMMIT_BRANCH" ]; then
         desc="$desc on branch $CI_COMMIT_BRANCH ($CI_COMMIT_TITLE)"
     fi
     echo "PRIVMSG $channel :$desc"
     for flake in `cat $flakes`; do
         echo "PRIVMSG $channel :$flake"
     done
     echo "PRIVMSG $channel :See $CI_JOB_URL/artifacts/browse/results/"
     echo "QUIT"
     ) | nc irc.freenode.net 6667 > /dev/null

 }

 extract_xml_result() {
     testcase=$1
     shift 1
     qpas=$*
     start="#beginTestCaseResult $testcase"

     # Pick the first QPA mentioning our testcase
     qpa=`grep -l "$start" $qpas | head -n 1`

     # If we found one, go extract just that testcase's contents from the QPA
     # to a new QPA, then do testlog-to-xml on that.
     if [ -n "$qpa" ]; then
         while IFS= read -r line; do
             if [ "$line" = "$start" ]; then
                 dst="$testcase.qpa"
                 echo "#beginSession" > $dst
                 echo "$line" >> $dst
                 while IFS= read -r line; do
                     if [ "$line" = "#endTestCaseResult" ]; then
                         echo "$line" >> $dst
                         echo "#endSession" >> $dst
                         /deqp/executor/testlog-to-xml $dst "$RESULTS/$testcase$DEQP_RUN_SUFFIX.xml"
                         # copy the stylesheets here so they only end up in artifacts
                         # if we have one or more result xml in artifacts
                         cp /deqp/testlog.css "$RESULTS/"
                         cp /deqp/testlog.xsl "$RESULTS/"
                         return 0
                     fi
                     echo "$line" >> $dst
                 done
                 return 1
             fi
         done < $qpa
     fi
 }

 extract_xml_results() {
     qpas=$*
     while IFS= read -r testcase; do
         testcase=${testcase%,*}
         extract_xml_result $testcase $qpas
     done
 }

 # Generate junit results
 generate_junit() {
     results=$1
     echo "<?xml version=\"1.0\" encoding=\"utf-8\"?>"
     echo "<testsuites>"
     echo "<testsuite name=\"$DEQP_VER-$CI_NODE_INDEX\">"
     while read line; do
         testcase=${line%,*}
         result=${line#*,}
         # avoid counting Skip's in the # of tests:
         if [ "$result" = "Skip" ]; then
             continue;
         fi
         echo "<testcase name=\"$testcase\">"
         if [ "$result" != "Pass" ]; then
             echo "<failure type=\"$result\">"
             echo "$result: See $CI_JOB_URL/artifacts/results/$testcase.xml"
             echo "</failure>"
         fi
         echo "</testcase>"
     done < $results
     echo "</testsuite>"
     echo "</testsuites>"
 }

 parse_renderer() {
     RENDERER=`grep -A1 TestCaseResult.\*info.renderer $RESULTS/deqp-info.qpa | grep '<Text' | sed 's|.*<Text>||g' | sed 's|</Text>||g'`
     VERSION=`grep -A1 TestCaseResult.\*info.version $RESULTS/deqp-info.qpa | grep '<Text' | sed 's|.*<Text>||g' | sed 's|</Text>||g'`
     echo "Renderer: $RENDERER"
     echo "Version: $VERSION "

     if ! echo $RENDERER | grep -q $DEQP_EXPECTED_RENDERER; then
         echo "Expected GL_RENDERER $DEQP_EXPECTED_RENDERER"
         exit 1
     fi
 }

 check_renderer() {
     echo "Capturing renderer info for GLES driver sanity checks"
     # If you're having trouble loading your driver, uncommenting this may help
     # debug.
     # export EGL_LOG_LEVEL=debug
     VERSION=`echo $DEQP_VER | tr '[a-z]' '[A-Z]'`
     $DEQP $DEQP_OPTIONS --deqp-case=$SUITE-$VERSION.info.\* --deqp-log-filename=$RESULTS/deqp-info.qpa
     parse_renderer
 }

 check_vk_device_name() {
     echo "Capturing device info for VK driver sanity checks"
     $DEQP $DEQP_OPTIONS --deqp-case=dEQP-VK.info.device --deqp-log-filename=$RESULTS/deqp-info.qpa
     DEVICENAME=`grep deviceName $RESULTS/deqp-info.qpa | sed 's|deviceName: ||g'`
     echo "deviceName: $DEVICENAME"
     if [ -n "$DEQP_EXPECTED_RENDERER" -a "x$DEVICENAME" != "x$DEQP_EXPECTED_RENDERER" ]; then
         echo "Expected deviceName $DEQP_EXPECTED_RENDERER"
         exit 1
     fi
 }

 # wrapper to supress +x to avoid spamming the log
 quiet() {
     set +x
     "$@"
     set -x
 }

 if [ "$GALLIUM_DRIVER" = "virpipe" ]; then
     # deqp is to use virpipe, and virgl_test_server llvmpipe
     export GALLIUM_DRIVER="$GALLIUM_DRIVER"

     VTEST_ARGS="--use-egl-surfaceless"
     if [ "$VIRGL_HOST_API" = "GLES" ]; then
         VTEST_ARGS="$VTEST_ARGS --use-gles"
     fi

     GALLIUM_DRIVER=llvmpipe \
     GALLIVM_PERF="nopt,no_filter_hacks" \
     virgl_test_server $VTEST_ARGS >$RESULTS/vtest-log.txt 2>&1 &

     sleep 1
 fi

 if [ $DEQP_VER = vk ]; then
     quiet check_vk_device_name
 else
     quiet check_renderer
 fi

 RESULTSFILE=$RESULTS/cts-runner-results$DEQP_RUN_SUFFIX.txt
 UNEXPECTED_RESULTSFILE=$RESULTS/cts-runner-unexpected-results$DEQP_RUN_SUFFIX.txt
 FLAKESFILE=$RESULTS/cts-runner-flakes$DEQP_RUN_SUFFIX.txt

 run_cts $DEQP /tmp/case-list.txt $RESULTSFILE
 DEQP_EXITCODE=$?

 echo "System load: $(cut -d' ' -f1-3 < /proc/loadavg)"
 echo "# of CPU cores: $(cat /proc/cpuinfo | grep processor | wc -l)"

 # junit is disabled, because it overloads gitlab.freedesktop.org to parse it.
 #quiet generate_junit $RESULTSFILE > $RESULTS/results.xml

 if [ $DEQP_EXITCODE -ne 0 ]; then
     # preserve caselist files in case of failures:
     cp /tmp/deqp_runner.*.txt $RESULTS/
     egrep -v ",Pass|,Skip|,ExpectedFail" $RESULTSFILE > $UNEXPECTED_RESULTSFILE

     # deqp-runner's flake detection won't perfectly detect all flakes, so
     # allow the driver to list some known flakes that won't intermittently
     # fail people's pipelines (while still allowing them to run and be
     # reported to IRC in the usual flake detection path).  If we had some
     # fails listed (so this wasn't a total runner failure), then filter out
     # the known flakes and see if there are any issues left.
     if [ -n "$DEQP_FLAKES" -a -s $UNEXPECTED_RESULTSFILE ]; then
         set +x
         while read line; do
             line=`echo $line | sed 's|#.*||g'`
             if [ -n "$line" ]; then
                 sed -i "/$line/d" $UNEXPECTED_RESULTSFILE
             fi
         done < $INSTALL/$DEQP_FLAKES
         set -x

         if [ ! -s $UNEXPECTED_RESULTSFILE ]; then
             exit 0
         fi
     fi

     if [ -z "$DEQP_NO_SAVE_RESULTS" ]; then
         echo "Some unexpected results found (see cts-runner-results.txt in artifacts for full results):"
         head -n 50 $UNEXPECTED_RESULTSFILE

         # Save the logs for up to the first 50 unexpected results:
         head -n 50 $UNEXPECTED_RESULTSFILE | quiet extract_xml_results /tmp/*.qpa
     else
         echo "Unexpected results found:"
         cat $UNEXPECTED_RESULTSFILE
     fi
 else
     grep ",Flake" $RESULTSFILE > $FLAKESFILE

     count=`cat $FLAKESFILE | wc -l`
     if [ $count -gt 0 ]; then
         echo "Some flakes found (see cts-runner-flakes.txt in artifacts for full results):"
         head -n 50 $FLAKESFILE

         if [ -z "$DEQP_NO_SAVE_RESULTS" ]; then
             # Save the logs for up to the first 50 flakes:
             head -n 50 $FLAKESFILE | quiet extract_xml_results /tmp/*.qpa
         fi

         # Report the flakes to IRC channel for monitoring (if configured):
         quiet report_flakes $FLAKESFILE
     else
         # no flakes, so clean-up:
         rm $FLAKESFILE
     fi
 fi

 exit $DEQP_EXITCODE
	#!/bin/sh

	set -ex

	DEQP_OPTIONS="$DEQP_OPTIONS --deqp-surface-width=256 --deqp-surface-height=256"
	DEQP_OPTIONS="$DEQP_OPTIONS --deqp-surface-type=pbuffer"
	DEQP_OPTIONS="$DEQP_OPTIONS --deqp-gl-config-name=rgba8888d24s8ms0"
	DEQP_OPTIONS="$DEQP_OPTIONS --deqp-visibility=hidden"

	# deqp's shader cache (for vulkan) is not multiprocess safe for a common
	# filename, see:
	# https://gitlab.freedesktop.org/mesa/parallel-deqp-runner/-/merge_requests/13
	DEQP_OPTIONS="$DEQP_OPTIONS --deqp-shadercache=disable"

	if [ -z "$DEQP_VER" ]; then
	echo 'DEQP_VER must be set to something like "gles2", "gles31" or "vk" for the test run'
	exit 1
	fi

	if [ "$DEQP_VER" = "vk" ]; then
	if [ -z "$VK_DRIVER" ]; then
	echo 'VK_DRIVER must be to something like "radeon" or "intel" for the test run'
	exit 1
	fi
	fi

	if [ -z "$DEQP_SKIPS" ]; then
	echo 'DEQP_SKIPS must be set to something like "deqp-default-skips.txt"'
	exit 1
	fi

	INSTALL=`pwd`/install

	# Set up the driver environment.
	export LD_LIBRARY_PATH=`pwd`/install/lib/
	export EGL_PLATFORM=surfaceless
	export VK_ICD_FILENAMES=`pwd`/install/share/vulkan/icd.d/"$VK_DRIVER"_icd.`uname -m`.json

	# the runner was failing to look for libkms in /usr/local/lib for some reason
	# I never figured out.
	export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib

	RESULTS=`pwd`/results
	mkdir -p $RESULTS

	# Generate test case list file.
	if [ "$DEQP_VER" = "vk" ]; then
	cp /deqp/mustpass/vk-master.txt /tmp/case-list.txt
	DEQP=/deqp/external/vulkancts/modules/vulkan/deqp-vk
	elif [ "$DEQP_VER" = "gles2" -o "$DEQP_VER" = "gles3" -o "$DEQP_VER" = "gles31" ]; then
	cp /deqp/mustpass/$DEQP_VER-master.txt /tmp/case-list.txt
	DEQP=/deqp/modules/$DEQP_VER/deqp-$DEQP_VER
	SUITE=dEQP
	else
	cp /deqp/mustpass/$DEQP_VER-master.txt /tmp/case-list.txt
	DEQP=/deqp/external/openglcts/modules/glcts
	SUITE=KHR
	fi

	# If the job is parallel, take the corresponding fraction of the caselist.
	# Note: N~M is a gnu sed extension to match every nth line (first line is #1).
	if [ -n "$CI_NODE_INDEX" ]; then
	sed -ni $CI_NODE_INDEX~$CI_NODE_TOTAL"p" /tmp/case-list.txt
	fi

	if [ -n "$DEQP_CASELIST_FILTER" ]; then
	sed -ni "/$DEQP_CASELIST_FILTER/p" /tmp/case-list.txt
	fi

	if [ ! -s /tmp/case-list.txt ]; then
	echo "Caselist generation failed"
	exit 1
	fi

	if [ -n "$DEQP_EXPECTED_FAILS" ]; then
	XFAIL="--xfail-list $INSTALL/$DEQP_EXPECTED_FAILS"
	fi

	set +e

	if [ -n "$DEQP_PARALLEL" ]; then
	JOB="--job $DEQP_PARALLEL"
	elif [ -n "$FDO_CI_CONCURRENT" ]; then
	JOB="--job $FDO_CI_CONCURRENT"
	else
	JOB="--job 4"
	fi

	run_cts() {
	deqp=$1
	caselist=$2
	output=$3
	deqp-runner \
	--deqp $deqp \
	--output $output \
	--caselist $caselist \
	--exclude-list $INSTALL/$DEQP_SKIPS \
	--compact-display false \
	$XFAIL \
	$JOB \
	--allow-flakes true \
	$DEQP_RUNNER_OPTIONS \
	-- \
	$DEQP_OPTIONS
	}

	report_flakes() {
	if [ -z "$FLAKES_CHANNEL" ]; then
	return 0
	fi
	flakes=$1
	# The nick needs to be something unique so that multiple runners
	# connecting at the same time don't race for one nick and get blocked.
	# freenode has a 16-char limit on nicks (9 is the IETF standard, but
	# various servers extend that). So, trim off the common prefixes of the
	# runner name, and append the job ID so that software runners with more
	# than one concurrent job (think swrast) don't collide. For freedreno,
	# that gives us a nick as long as db410c-N-JJJJJJJJ, and it'll be a while
	# before we make it to 9-digit jobs (we're at 7 so far).
	runner=`echo $CI_RUNNER_DESCRIPTION \| sed 's\|mesa-\|\|' \| sed 's\|google-freedreno-\|\|g'`
	bot="$runner-$CI_JOB_ID"
	channel="$FLAKES_CHANNEL"
	(
	echo NICK $bot
	echo USER $bot unused unused :Gitlab CI Notifier
	sleep 10
	echo "JOIN $channel"
	sleep 1
	desc="Flakes detected in job: $CI_JOB_URL on $CI_RUNNER_DESCRIPTION"
	if [ -n "$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME" ]; then
	desc="$desc on branch $CI_MERGE_REQUEST_SOURCE_BRANCH_NAME ($CI_MERGE_REQUEST_TITLE)"
	elif [ -n "$CI_COMMIT_BRANCH" ]; then
	desc="$desc on branch $CI_COMMIT_BRANCH ($CI_COMMIT_TITLE)"
	fi
	echo "PRIVMSG $channel :$desc"
	for flake in `cat $flakes`; do
	echo "PRIVMSG $channel :$flake"
	done
	echo "PRIVMSG $channel :See $CI_JOB_URL/artifacts/browse/results/"
	echo "QUIT"
	) \| nc irc.freenode.net 6667 > /dev/null

	}

	extract_xml_result() {
	testcase=$1
	shift 1
	qpas=$*
	start="#beginTestCaseResult $testcase"

	# Pick the first QPA mentioning our testcase
	qpa=`grep -l "$start" $qpas \| head -n 1`

	# If we found one, go extract just that testcase's contents from the QPA
	# to a new QPA, then do testlog-to-xml on that.
	if [ -n "$qpa" ]; then
	while IFS= read -r line; do
	if [ "$line" = "$start" ]; then
	dst="$testcase.qpa"
	echo "#beginSession" > $dst
	echo "$line" >> $dst
	while IFS= read -r line; do
	if [ "$line" = "#endTestCaseResult" ]; then
	echo "$line" >> $dst
	echo "#endSession" >> $dst
	/deqp/executor/testlog-to-xml $dst "$RESULTS/$testcase$DEQP_RUN_SUFFIX.xml"
	# copy the stylesheets here so they only end up in artifacts
	# if we have one or more result xml in artifacts
	cp /deqp/testlog.css "$RESULTS/"
	cp /deqp/testlog.xsl "$RESULTS/"
	return 0
	fi
	echo "$line" >> $dst
	done
	return 1
	fi
	done < $qpa
	fi
	}

	extract_xml_results() {
	qpas=$*
	while IFS= read -r testcase; do
	testcase=${testcase%,*}
	extract_xml_result $testcase $qpas
	done
	}

	# Generate junit results
	generate_junit() {
	results=$1
	echo "<?xml version=\"1.0\" encoding=\"utf-8\"?>"
	echo "<testsuites>"
	echo "<testsuite name=\"$DEQP_VER-$CI_NODE_INDEX\">"
	while read line; do
	testcase=${line%,*}
	result=${line#*,}
	# avoid counting Skip's in the # of tests:
	if [ "$result" = "Skip" ]; then
	continue;
	fi
	echo "<testcase name=\"$testcase\">"
	if [ "$result" != "Pass" ]; then
	echo "<failure type=\"$result\">"
	echo "$result: See $CI_JOB_URL/artifacts/results/$testcase.xml"
	echo "</failure>"
	fi
	echo "</testcase>"
	done < $results
	echo "</testsuite>"
	echo "</testsuites>"
	}

	parse_renderer() {
	RENDERER=`grep -A1 TestCaseResult.\info.renderer $RESULTS/deqp-info.qpa \| grep '<Text' \| sed 's\|.<Text>\|\|g' \| sed 's\|</Text>\|\|g'`
	VERSION=`grep -A1 TestCaseResult.\info.version $RESULTS/deqp-info.qpa \| grep '<Text' \| sed 's\|.<Text>\|\|g' \| sed 's\|</Text>\|\|g'`
	echo "Renderer: $RENDERER"
	echo "Version: $VERSION "

	if ! echo $RENDERER \| grep -q $DEQP_EXPECTED_RENDERER; then
	echo "Expected GL_RENDERER $DEQP_EXPECTED_RENDERER"
	exit 1
	fi
	}

	check_renderer() {
	echo "Capturing renderer info for GLES driver sanity checks"
	# If you're having trouble loading your driver, uncommenting this may help
	# debug.
	# export EGL_LOG_LEVEL=debug
	VERSION=`echo $DEQP_VER \| tr '[a-z]' '[A-Z]'`
	$DEQP $DEQP_OPTIONS --deqp-case=$SUITE-$VERSION.info.\* --deqp-log-filename=$RESULTS/deqp-info.qpa
	parse_renderer
	}

	check_vk_device_name() {
	echo "Capturing device info for VK driver sanity checks"
	$DEQP $DEQP_OPTIONS --deqp-case=dEQP-VK.info.device --deqp-log-filename=$RESULTS/deqp-info.qpa
	DEVICENAME=`grep deviceName $RESULTS/deqp-info.qpa \| sed 's\|deviceName: \|\|g'`
	echo "deviceName: $DEVICENAME"
	if [ -n "$DEQP_EXPECTED_RENDERER" -a "x$DEVICENAME" != "x$DEQP_EXPECTED_RENDERER" ]; then
	echo "Expected deviceName $DEQP_EXPECTED_RENDERER"
	exit 1
	fi
	}

	# wrapper to supress +x to avoid spamming the log
	quiet() {
	set +x
	"$@"
	set -x
	}

	if [ "$GALLIUM_DRIVER" = "virpipe" ]; then
	# deqp is to use virpipe, and virgl_test_server llvmpipe
	export GALLIUM_DRIVER="$GALLIUM_DRIVER"

	VTEST_ARGS="--use-egl-surfaceless"
	if [ "$VIRGL_HOST_API" = "GLES" ]; then
	VTEST_ARGS="$VTEST_ARGS --use-gles"
	fi

	GALLIUM_DRIVER=llvmpipe \
	GALLIVM_PERF="nopt,no_filter_hacks" \
	virgl_test_server $VTEST_ARGS >$RESULTS/vtest-log.txt 2>&1 &

	sleep 1
	fi

	if [ $DEQP_VER = vk ]; then
	quiet check_vk_device_name
	else
	quiet check_renderer
	fi

	RESULTSFILE=$RESULTS/cts-runner-results$DEQP_RUN_SUFFIX.txt
	UNEXPECTED_RESULTSFILE=$RESULTS/cts-runner-unexpected-results$DEQP_RUN_SUFFIX.txt
	FLAKESFILE=$RESULTS/cts-runner-flakes$DEQP_RUN_SUFFIX.txt

	run_cts $DEQP /tmp/case-list.txt $RESULTSFILE
	DEQP_EXITCODE=$?

	echo "System load: $(cut -d' ' -f1-3 < /proc/loadavg)"
	echo "# of CPU cores: $(cat /proc/cpuinfo \| grep processor \| wc -l)"

	# junit is disabled, because it overloads gitlab.freedesktop.org to parse it.
	#quiet generate_junit $RESULTSFILE > $RESULTS/results.xml

	if [ $DEQP_EXITCODE -ne 0 ]; then
	# preserve caselist files in case of failures:
	cp /tmp/deqp_runner.*.txt $RESULTS/
	egrep -v ",Pass\|,Skip\|,ExpectedFail" $RESULTSFILE > $UNEXPECTED_RESULTSFILE

	# deqp-runner's flake detection won't perfectly detect all flakes, so
	# allow the driver to list some known flakes that won't intermittently
	# fail people's pipelines (while still allowing them to run and be
	# reported to IRC in the usual flake detection path). If we had some
	# fails listed (so this wasn't a total runner failure), then filter out
	# the known flakes and see if there are any issues left.
	if [ -n "$DEQP_FLAKES" -a -s $UNEXPECTED_RESULTSFILE ]; then
	set +x
	while read line; do
	line=`echo $line \| sed 's\|#.*\|\|g'`
	if [ -n "$line" ]; then
	sed -i "/$line/d" $UNEXPECTED_RESULTSFILE
	fi
	done < $INSTALL/$DEQP_FLAKES
	set -x

	if [ ! -s $UNEXPECTED_RESULTSFILE ]; then
	exit 0
	fi
	fi

	if [ -z "$DEQP_NO_SAVE_RESULTS" ]; then
	echo "Some unexpected results found (see cts-runner-results.txt in artifacts for full results):"
	head -n 50 $UNEXPECTED_RESULTSFILE

	# Save the logs for up to the first 50 unexpected results:
	head -n 50 $UNEXPECTED_RESULTSFILE \| quiet extract_xml_results /tmp/*.qpa
	else
	echo "Unexpected results found:"
	cat $UNEXPECTED_RESULTSFILE
	fi
	else
	grep ",Flake" $RESULTSFILE > $FLAKESFILE

	count=`cat $FLAKESFILE \| wc -l`
	if [ $count -gt 0 ]; then
	echo "Some flakes found (see cts-runner-flakes.txt in artifacts for full results):"
	head -n 50 $FLAKESFILE

	if [ -z "$DEQP_NO_SAVE_RESULTS" ]; then
	# Save the logs for up to the first 50 flakes:
	head -n 50 $FLAKESFILE \| quiet extract_xml_results /tmp/*.qpa
	fi

	# Report the flakes to IRC channel for monitoring (if configured):
	quiet report_flakes $FLAKESFILE
	else
	# no flakes, so clean-up:
	rm $FLAKESFILE
	fi
	fi

	exit $DEQP_EXITCODE