src/panfrost/bifrost/compiler.h

/*
 * Copyright (C) 2020 Collabora Ltd.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 *
 * Authors (Collabora):
 *      Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
 */

#ifndef __BIFROST_COMPILER_H
#define __BIFROST_COMPILER_H

#include "bifrost.h"
#include "compiler/nir/nir.h"

/* Bifrost opcodes are tricky -- the same op may exist on both FMA and
 * ADD with two completely different opcodes, and opcodes can be varying
 * length in some cases. Then we have different opcodes for int vs float
 * and then sometimes even for different typesizes. Further, virtually
 * every op has a number of flags which depend on the op. In constrast
 * to Midgard where you have a strict ALU/LDST/TEX division and within
 * ALU you have strict int/float and that's it... here it's a *lot* more
 * involved. As such, we use something much higher level for our IR,
 * encoding "classes" of operations, letting the opcode details get
 * sorted out at emit time.
 *
 * Please keep this list alphabetized. Please use a dictionary if you
 * don't know how to do that.
 */

enum bi_class {
        BI_ADD,
        BI_ATEST,
        BI_BRANCH,
        BI_CMP,
        BI_BLEND,
        BI_BITWISE,
        BI_CONVERT,
        BI_CSEL,
        BI_DISCARD,
        BI_FMA,
        BI_FREXP,
        BI_LOAD,
        BI_LOAD_ATTR,
        BI_LOAD_VAR,
        BI_LOAD_VAR_ADDRESS,
        BI_MINMAX,
        BI_MOV,
        BI_SHIFT,
        BI_STORE,
        BI_STORE_VAR,
        BI_SPECIAL, /* _FAST, _TABLE on supported GPUs */
        BI_TEX,
        BI_ROUND,
        BI_NUM_CLASSES
};

/* Properties of a class... */
extern unsigned bi_class_props[BI_NUM_CLASSES];

/* abs/neg/outmod valid for a float op */
#define BI_MODS (1 << 0)

/* Generic enough that little class-specific information is required. In other
 * words, it acts as a "normal" ALU op, even if the encoding ends up being
 * irregular enough to warrant a separate class */
#define BI_GENERIC (1 << 1)

/* Accepts a bifrost_roundmode */
#define BI_ROUNDMODE (1 << 2)

/* Can be scheduled to FMA */
#define BI_SCHED_FMA (1 << 3)

/* Can be scheduled to ADD */
#define BI_SCHED_ADD (1 << 4)

/* Most ALU ops can do either, actually */
#define BI_SCHED_ALL (BI_SCHED_FMA | BI_SCHED_ADD)

/* It can't get any worse than csel4... can it? */
#define BIR_SRC_COUNT 4

/* Class-specific data for BI_LD_ATTR, BI_LD_VAR_ADDR */
struct bi_load {
        /* Note: no indirects here */
        unsigned location;

        /* Only for BI_LD_ATTR. But number of vector channels */
        unsigned channels;
};

/* BI_LD_VARY */
struct bi_load_vary {
        /* All parameters used here. Indirect location specified in
         * src1 and ignoring location, if present. */
        struct bi_load load;

        enum bifrost_interp_mode interp_mode;
        bool reuse;
        bool flat;
};

typedef struct {
        struct list_head link; /* Must be first */
        enum bi_class type;

        /* Indices, see bir_ssa_index etc. Note zero is special cased
         * to "no argument" */
        unsigned dest;
        unsigned src[BIR_SRC_COUNT];

        /* Floating-point modifiers, type/class permitting. If not
         * allowed for the type/class, these are ignored. */
        enum bifrost_outmod outmod;
        bool src_abs[BIR_SRC_COUNT];
        bool src_neg[BIR_SRC_COUNT];

        /* Round mode (requires BI_ROUNDMODE) */
        enum bifrost_roundmode roundmode;

        /* Destination type. Usually the type of the instruction
         * itself, but if sources and destination have different
         * types, the type of the destination wins (so f2i would be
         * int). Zero if there is no destination. Bitsize included */
        nir_alu_type dest_type;

        /* Union for class-specific information */
        union {
                enum bifrost_minmax_mode minmax;
                struct bi_load load;
                struct bi_load_vary load_vary;
        };
} bi_instruction;

/* Scheduling takes place in two steps. Step 1 groups instructions within a
 * block into distinct clauses (bi_clause). Step 2 schedules instructions
 * within a clause into FMA/ADD pairs (bi_bundle).
 *
 * A bi_bundle contains two paired instruction pointers. If a slot is unfilled,
 * leave it NULL; the emitter will fill in a nop.
 */

typedef struct {
        bi_instruction *fma;
        bi_instruction *add;
} bi_bundle;

typedef struct {
        struct list_head link;

        /* A clause can have 8 instructions in bundled FMA/ADD sense, so there
         * can be 8 bundles. But each bundle can have both an FMA and an ADD,
         * so a clause can have up to 16 bi_instructions. Whether bundles or
         * instructions are used depends on where in scheduling we are. */

        unsigned instruction_count;
        unsigned bundle_count;

        union {
                bi_instruction *instructions[16];
                bi_bundle bundles[8];
        };
} bi_clause;

typedef struct bi_block {
        struct list_head link; /* must be first */
        unsigned name; /* Just for pretty-printing */

        /* If true, uses clauses; if false, uses instructions */
        bool scheduled;

        union {
                struct list_head instructions; /* pre-schedule, list of bi_instructions */
                struct list_head clauses; /* list of bi_clause */
        };
} bi_block;

typedef struct {
       nir_shader *nir;
       struct list_head blocks; /* list of bi_block */
} bi_context; 

/* So we can distinguish between SSA/reg/sentinel quickly */
#define BIR_NO_ARG (0)
#define BIR_IS_REG (1)

static inline unsigned
bir_ssa_index(nir_ssa_def *ssa)
{
        /* Off-by-one ensures BIR_NO_ARG is skipped */
        return ((ssa->index + 1) << 1) | 0;
}

static inline unsigned
bir_src_index(nir_src *src)
{
        if (src->is_ssa)
                return bir_ssa_index(src->ssa);
        else {
                assert(!src->reg.indirect);
                return (src->reg.reg->index << 1) | BIR_IS_REG;
        }
}

static inline unsigned
bir_dest_index(nir_dest *dst)
{
        if (dst->is_ssa)
                return bir_ssa_index(&dst->ssa);
        else {
                assert(!dst->reg.indirect);
                return (dst->reg.reg->index << 1) | BIR_IS_REG;
        }
}

#endif