| /* |
| * Copyright 2014 The Chromium OS Authors. All rights reserved. |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include <assert.h> |
| #include <errno.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/mman.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| #include <xf86drm.h> |
| |
| #include "drv_priv.h" |
| #include "helpers.h" |
| #include "util.h" |
| |
| struct planar_layout { |
| size_t num_planes; |
| int horizontal_subsampling[DRV_MAX_PLANES]; |
| int vertical_subsampling[DRV_MAX_PLANES]; |
| int bytes_per_pixel[DRV_MAX_PLANES]; |
| }; |
| |
| // clang-format off |
| |
| static const struct planar_layout packed_1bpp_layout = { |
| .num_planes = 1, |
| .horizontal_subsampling = { 1 }, |
| .vertical_subsampling = { 1 }, |
| .bytes_per_pixel = { 1 } |
| }; |
| |
| static const struct planar_layout packed_2bpp_layout = { |
| .num_planes = 1, |
| .horizontal_subsampling = { 1 }, |
| .vertical_subsampling = { 1 }, |
| .bytes_per_pixel = { 2 } |
| }; |
| |
| static const struct planar_layout packed_3bpp_layout = { |
| .num_planes = 1, |
| .horizontal_subsampling = { 1 }, |
| .vertical_subsampling = { 1 }, |
| .bytes_per_pixel = { 3 } |
| }; |
| |
| static const struct planar_layout packed_4bpp_layout = { |
| .num_planes = 1, |
| .horizontal_subsampling = { 1 }, |
| .vertical_subsampling = { 1 }, |
| .bytes_per_pixel = { 4 } |
| }; |
| |
| static const struct planar_layout packed_8bpp_layout = { |
| .num_planes = 1, |
| .horizontal_subsampling = { 1 }, |
| .vertical_subsampling = { 1 }, |
| .bytes_per_pixel = { 8 } |
| }; |
| |
| static const struct planar_layout biplanar_yuv_420_layout = { |
| .num_planes = 2, |
| .horizontal_subsampling = { 1, 2 }, |
| .vertical_subsampling = { 1, 2 }, |
| .bytes_per_pixel = { 1, 2 } |
| }; |
| |
| static const struct planar_layout triplanar_yuv_420_layout = { |
| .num_planes = 3, |
| .horizontal_subsampling = { 1, 2, 2 }, |
| .vertical_subsampling = { 1, 2, 2 }, |
| .bytes_per_pixel = { 1, 1, 1 } |
| }; |
| |
| static const struct planar_layout biplanar_yuv_p010_layout = { |
| .num_planes = 2, |
| .horizontal_subsampling = { 1, 2 }, |
| .vertical_subsampling = { 1, 2 }, |
| .bytes_per_pixel = { 2, 4 } |
| }; |
| |
| // clang-format on |
| |
| static const struct planar_layout *layout_from_format(uint32_t format) |
| { |
| switch (format) { |
| case DRM_FORMAT_BGR233: |
| case DRM_FORMAT_C8: |
| case DRM_FORMAT_R8: |
| case DRM_FORMAT_RGB332: |
| return &packed_1bpp_layout; |
| |
| case DRM_FORMAT_R16: |
| return &packed_2bpp_layout; |
| |
| case DRM_FORMAT_YVU420: |
| case DRM_FORMAT_YVU420_ANDROID: |
| return &triplanar_yuv_420_layout; |
| |
| case DRM_FORMAT_NV12: |
| case DRM_FORMAT_NV21: |
| return &biplanar_yuv_420_layout; |
| |
| case DRM_FORMAT_P010: |
| return &biplanar_yuv_p010_layout; |
| |
| case DRM_FORMAT_ABGR1555: |
| case DRM_FORMAT_ABGR4444: |
| case DRM_FORMAT_ARGB1555: |
| case DRM_FORMAT_ARGB4444: |
| case DRM_FORMAT_BGR565: |
| case DRM_FORMAT_BGRA4444: |
| case DRM_FORMAT_BGRA5551: |
| case DRM_FORMAT_BGRX4444: |
| case DRM_FORMAT_BGRX5551: |
| case DRM_FORMAT_GR88: |
| case DRM_FORMAT_RG88: |
| case DRM_FORMAT_RGB565: |
| case DRM_FORMAT_RGBA4444: |
| case DRM_FORMAT_RGBA5551: |
| case DRM_FORMAT_RGBX4444: |
| case DRM_FORMAT_RGBX5551: |
| case DRM_FORMAT_UYVY: |
| case DRM_FORMAT_VYUY: |
| case DRM_FORMAT_XBGR1555: |
| case DRM_FORMAT_XBGR4444: |
| case DRM_FORMAT_XRGB1555: |
| case DRM_FORMAT_XRGB4444: |
| case DRM_FORMAT_YUYV: |
| case DRM_FORMAT_YVYU: |
| case DRM_FORMAT_MTISP_SXYZW10: |
| return &packed_2bpp_layout; |
| |
| case DRM_FORMAT_BGR888: |
| case DRM_FORMAT_RGB888: |
| return &packed_3bpp_layout; |
| |
| case DRM_FORMAT_ABGR2101010: |
| case DRM_FORMAT_ABGR8888: |
| case DRM_FORMAT_ARGB2101010: |
| case DRM_FORMAT_ARGB8888: |
| case DRM_FORMAT_AYUV: |
| case DRM_FORMAT_BGRA1010102: |
| case DRM_FORMAT_BGRA8888: |
| case DRM_FORMAT_BGRX1010102: |
| case DRM_FORMAT_BGRX8888: |
| case DRM_FORMAT_RGBA1010102: |
| case DRM_FORMAT_RGBA8888: |
| case DRM_FORMAT_RGBX1010102: |
| case DRM_FORMAT_RGBX8888: |
| case DRM_FORMAT_XBGR2101010: |
| case DRM_FORMAT_XBGR8888: |
| case DRM_FORMAT_XRGB2101010: |
| case DRM_FORMAT_XRGB8888: |
| return &packed_4bpp_layout; |
| |
| case DRM_FORMAT_ABGR16161616F: |
| return &packed_8bpp_layout; |
| |
| default: |
| drv_log("UNKNOWN FORMAT %d\n", format); |
| return NULL; |
| } |
| } |
| |
| size_t drv_num_planes_from_format(uint32_t format) |
| { |
| const struct planar_layout *layout = layout_from_format(format); |
| |
| /* |
| * drv_bo_new calls this function early to query number of planes and |
| * considers 0 planes to mean unknown format, so we have to support |
| * that. All other layout_from_format() queries can assume that the |
| * format is supported and that the return value is non-NULL. |
| */ |
| |
| return layout ? layout->num_planes : 0; |
| } |
| |
| size_t drv_num_planes_from_modifier(struct driver *drv, uint32_t format, uint64_t modifier) |
| { |
| size_t planes = drv_num_planes_from_format(format); |
| |
| /* Disallow unsupported formats. */ |
| if (!planes) |
| return 0; |
| |
| if (drv->backend->num_planes_from_modifier && modifier != DRM_FORMAT_MOD_INVALID && |
| modifier != DRM_FORMAT_MOD_LINEAR) |
| return drv->backend->num_planes_from_modifier(drv, format, modifier); |
| |
| return planes; |
| } |
| |
| uint32_t drv_height_from_format(uint32_t format, uint32_t height, size_t plane) |
| { |
| const struct planar_layout *layout = layout_from_format(format); |
| |
| assert(plane < layout->num_planes); |
| |
| return DIV_ROUND_UP(height, layout->vertical_subsampling[plane]); |
| } |
| |
| uint32_t drv_vertical_subsampling_from_format(uint32_t format, size_t plane) |
| { |
| const struct planar_layout *layout = layout_from_format(format); |
| |
| assert(plane < layout->num_planes); |
| |
| return layout->vertical_subsampling[plane]; |
| } |
| |
| uint32_t drv_bytes_per_pixel_from_format(uint32_t format, size_t plane) |
| { |
| const struct planar_layout *layout = layout_from_format(format); |
| |
| assert(plane < layout->num_planes); |
| |
| return layout->bytes_per_pixel[plane]; |
| } |
| |
| /* |
| * This function returns the stride for a given format, width and plane. |
| */ |
| uint32_t drv_stride_from_format(uint32_t format, uint32_t width, size_t plane) |
| { |
| const struct planar_layout *layout = layout_from_format(format); |
| assert(plane < layout->num_planes); |
| |
| uint32_t plane_width = DIV_ROUND_UP(width, layout->horizontal_subsampling[plane]); |
| uint32_t stride = plane_width * layout->bytes_per_pixel[plane]; |
| |
| /* |
| * The stride of Android YV12 buffers is required to be aligned to 16 bytes |
| * (see <system/graphics.h>). |
| */ |
| if (format == DRM_FORMAT_YVU420_ANDROID) |
| stride = (plane == 0) ? ALIGN(stride, 32) : ALIGN(stride, 16); |
| |
| return stride; |
| } |
| |
| uint32_t drv_size_from_format(uint32_t format, uint32_t stride, uint32_t height, size_t plane) |
| { |
| return stride * drv_height_from_format(format, height, plane); |
| } |
| |
| static uint32_t subsample_stride(uint32_t stride, uint32_t format, size_t plane) |
| { |
| if (plane != 0) { |
| switch (format) { |
| case DRM_FORMAT_YVU420: |
| case DRM_FORMAT_YVU420_ANDROID: |
| stride = DIV_ROUND_UP(stride, 2); |
| break; |
| } |
| } |
| |
| return stride; |
| } |
| |
| /* |
| * This function fills in the buffer object given the driver aligned stride of |
| * the first plane, height and a format. This function assumes there is just |
| * one kernel buffer per buffer object. |
| */ |
| int drv_bo_from_format(struct bo *bo, uint32_t stride, uint32_t aligned_height, uint32_t format) |
| { |
| uint32_t padding[DRV_MAX_PLANES] = { 0 }; |
| return drv_bo_from_format_and_padding(bo, stride, aligned_height, format, padding); |
| } |
| |
| int drv_bo_from_format_and_padding(struct bo *bo, uint32_t stride, uint32_t aligned_height, |
| uint32_t format, uint32_t padding[DRV_MAX_PLANES]) |
| { |
| size_t p, num_planes; |
| uint32_t offset = 0; |
| |
| num_planes = drv_num_planes_from_format(format); |
| assert(num_planes); |
| |
| /* |
| * HAL_PIXEL_FORMAT_YV12 requires that (see <system/graphics.h>): |
| * - the aligned height is same as the buffer's height. |
| * - the chroma stride is 16 bytes aligned, i.e., the luma's strides |
| * is 32 bytes aligned. |
| */ |
| if (format == DRM_FORMAT_YVU420_ANDROID) { |
| assert(aligned_height == bo->meta.height); |
| assert(stride == ALIGN(stride, 32)); |
| } |
| |
| for (p = 0; p < num_planes; p++) { |
| bo->meta.strides[p] = subsample_stride(stride, format, p); |
| bo->meta.sizes[p] = |
| drv_size_from_format(format, bo->meta.strides[p], aligned_height, p) + |
| padding[p]; |
| bo->meta.offsets[p] = offset; |
| offset += bo->meta.sizes[p]; |
| } |
| |
| bo->meta.total_size = offset; |
| return 0; |
| } |
| |
| int drv_dumb_bo_create_ex(struct bo *bo, uint32_t width, uint32_t height, uint32_t format, |
| uint64_t use_flags, uint64_t quirks) |
| { |
| int ret; |
| size_t plane; |
| uint32_t aligned_width, aligned_height; |
| struct drm_mode_create_dumb create_dumb = { 0 }; |
| |
| aligned_width = width; |
| aligned_height = height; |
| switch (format) { |
| case DRM_FORMAT_R16: |
| /* HAL_PIXEL_FORMAT_Y16 requires that the buffer's width be 16 pixel |
| * aligned. See hardware/interfaces/graphics/common/1.0/types.hal. */ |
| aligned_width = ALIGN(width, 16); |
| break; |
| case DRM_FORMAT_YVU420_ANDROID: |
| /* HAL_PIXEL_FORMAT_YV12 requires that the buffer's height not |
| * be aligned. Update 'height' so that drv_bo_from_format below |
| * uses the non-aligned height. */ |
| height = bo->meta.height; |
| |
| /* Align width to 32 pixels, so chroma strides are 16 bytes as |
| * Android requires. */ |
| aligned_width = ALIGN(width, 32); |
| |
| /* Adjust the height to include room for chroma planes. */ |
| aligned_height = 3 * DIV_ROUND_UP(height, 2); |
| break; |
| case DRM_FORMAT_YVU420: |
| case DRM_FORMAT_NV12: |
| case DRM_FORMAT_NV21: |
| /* Adjust the height to include room for chroma planes */ |
| aligned_height = 3 * DIV_ROUND_UP(height, 2); |
| break; |
| default: |
| break; |
| } |
| |
| if (quirks & BO_QUIRK_DUMB32BPP) { |
| aligned_width = |
| DIV_ROUND_UP(aligned_width * layout_from_format(format)->bytes_per_pixel[0], 4); |
| create_dumb.bpp = 32; |
| } else { |
| create_dumb.bpp = layout_from_format(format)->bytes_per_pixel[0] * 8; |
| } |
| create_dumb.width = aligned_width; |
| create_dumb.height = aligned_height; |
| create_dumb.flags = 0; |
| |
| ret = drmIoctl(bo->drv->fd, DRM_IOCTL_MODE_CREATE_DUMB, &create_dumb); |
| if (ret) { |
| drv_log("DRM_IOCTL_MODE_CREATE_DUMB failed (%d, %d)\n", bo->drv->fd, errno); |
| return -errno; |
| } |
| |
| drv_bo_from_format(bo, create_dumb.pitch, height, format); |
| |
| for (plane = 0; plane < bo->meta.num_planes; plane++) |
| bo->handles[plane].u32 = create_dumb.handle; |
| |
| bo->meta.total_size = create_dumb.size; |
| return 0; |
| } |
| |
| int drv_dumb_bo_create(struct bo *bo, uint32_t width, uint32_t height, uint32_t format, |
| uint64_t use_flags) |
| { |
| return drv_dumb_bo_create_ex(bo, width, height, format, use_flags, BO_QUIRK_NONE); |
| } |
| |
| int drv_dumb_bo_destroy(struct bo *bo) |
| { |
| int ret; |
| struct drm_mode_destroy_dumb destroy_dumb = { 0 }; |
| |
| destroy_dumb.handle = bo->handles[0].u32; |
| ret = drmIoctl(bo->drv->fd, DRM_IOCTL_MODE_DESTROY_DUMB, &destroy_dumb); |
| if (ret) { |
| drv_log("DRM_IOCTL_MODE_DESTROY_DUMB failed (handle=%x)\n", bo->handles[0].u32); |
| return -errno; |
| } |
| |
| return 0; |
| } |
| |
| int drv_gem_bo_destroy(struct bo *bo) |
| { |
| struct drm_gem_close gem_close; |
| int ret, error = 0; |
| size_t plane, i; |
| |
| for (plane = 0; plane < bo->meta.num_planes; plane++) { |
| for (i = 0; i < plane; i++) |
| if (bo->handles[i].u32 == bo->handles[plane].u32) |
| break; |
| /* Make sure close hasn't already been called on this handle */ |
| if (i != plane) |
| continue; |
| |
| memset(&gem_close, 0, sizeof(gem_close)); |
| gem_close.handle = bo->handles[plane].u32; |
| |
| ret = drmIoctl(bo->drv->fd, DRM_IOCTL_GEM_CLOSE, &gem_close); |
| if (ret) { |
| drv_log("DRM_IOCTL_GEM_CLOSE failed (handle=%x) error %d\n", |
| bo->handles[plane].u32, ret); |
| error = -errno; |
| } |
| } |
| |
| return error; |
| } |
| |
| int drv_prime_bo_import(struct bo *bo, struct drv_import_fd_data *data) |
| { |
| int ret; |
| size_t plane; |
| struct drm_prime_handle prime_handle; |
| |
| for (plane = 0; plane < bo->meta.num_planes; plane++) { |
| memset(&prime_handle, 0, sizeof(prime_handle)); |
| prime_handle.fd = data->fds[plane]; |
| |
| ret = drmIoctl(bo->drv->fd, DRM_IOCTL_PRIME_FD_TO_HANDLE, &prime_handle); |
| |
| if (ret) { |
| drv_log("DRM_IOCTL_PRIME_FD_TO_HANDLE failed (fd=%u)\n", prime_handle.fd); |
| |
| /* |
| * Need to call GEM close on planes that were opened, |
| * if any. Adjust the num_planes variable to be the |
| * plane that failed, so GEM close will be called on |
| * planes before that plane. |
| */ |
| bo->meta.num_planes = plane; |
| drv_gem_bo_destroy(bo); |
| return -errno; |
| } |
| |
| bo->handles[plane].u32 = prime_handle.handle; |
| } |
| bo->meta.tiling = data->tiling; |
| |
| return 0; |
| } |
| |
| void *drv_dumb_bo_map(struct bo *bo, struct vma *vma, size_t plane, uint32_t map_flags) |
| { |
| int ret; |
| size_t i; |
| struct drm_mode_map_dumb map_dumb; |
| |
| memset(&map_dumb, 0, sizeof(map_dumb)); |
| map_dumb.handle = bo->handles[plane].u32; |
| |
| ret = drmIoctl(bo->drv->fd, DRM_IOCTL_MODE_MAP_DUMB, &map_dumb); |
| if (ret) { |
| drv_log("DRM_IOCTL_MODE_MAP_DUMB failed\n"); |
| return MAP_FAILED; |
| } |
| |
| for (i = 0; i < bo->meta.num_planes; i++) |
| if (bo->handles[i].u32 == bo->handles[plane].u32) |
| vma->length += bo->meta.sizes[i]; |
| |
| return mmap(0, vma->length, drv_get_prot(map_flags), MAP_SHARED, bo->drv->fd, |
| map_dumb.offset); |
| } |
| |
| int drv_bo_munmap(struct bo *bo, struct vma *vma) |
| { |
| return munmap(vma->addr, vma->length); |
| } |
| |
| int drv_mapping_destroy(struct bo *bo) |
| { |
| int ret; |
| size_t plane; |
| struct mapping *mapping; |
| uint32_t idx; |
| |
| /* |
| * This function is called right before the buffer is destroyed. It will free any mappings |
| * associated with the buffer. |
| */ |
| |
| idx = 0; |
| for (plane = 0; plane < bo->meta.num_planes; plane++) { |
| while (idx < drv_array_size(bo->drv->mappings)) { |
| mapping = (struct mapping *)drv_array_at_idx(bo->drv->mappings, idx); |
| if (mapping->vma->handle != bo->handles[plane].u32) { |
| idx++; |
| continue; |
| } |
| |
| if (!--mapping->vma->refcount) { |
| ret = bo->drv->backend->bo_unmap(bo, mapping->vma); |
| if (ret) { |
| drv_log("munmap failed\n"); |
| return ret; |
| } |
| |
| free(mapping->vma); |
| } |
| |
| /* This shrinks and shifts the array, so don't increment idx. */ |
| drv_array_remove(bo->drv->mappings, idx); |
| } |
| } |
| |
| return 0; |
| } |
| |
| int drv_get_prot(uint32_t map_flags) |
| { |
| return (BO_MAP_WRITE & map_flags) ? PROT_WRITE | PROT_READ : PROT_READ; |
| } |
| |
| uintptr_t drv_get_reference_count(struct driver *drv, struct bo *bo, size_t plane) |
| { |
| void *count; |
| uintptr_t num = 0; |
| |
| if (!drmHashLookup(drv->buffer_table, bo->handles[plane].u32, &count)) |
| num = (uintptr_t)(count); |
| |
| return num; |
| } |
| |
| void drv_increment_reference_count(struct driver *drv, struct bo *bo, size_t plane) |
| { |
| uintptr_t num = drv_get_reference_count(drv, bo, plane); |
| |
| /* If a value isn't in the table, drmHashDelete is a no-op */ |
| drmHashDelete(drv->buffer_table, bo->handles[plane].u32); |
| drmHashInsert(drv->buffer_table, bo->handles[plane].u32, (void *)(num + 1)); |
| } |
| |
| void drv_decrement_reference_count(struct driver *drv, struct bo *bo, size_t plane) |
| { |
| uintptr_t num = drv_get_reference_count(drv, bo, plane); |
| |
| drmHashDelete(drv->buffer_table, bo->handles[plane].u32); |
| |
| if (num > 0) |
| drmHashInsert(drv->buffer_table, bo->handles[plane].u32, (void *)(num - 1)); |
| } |
| |
| void drv_add_combination(struct driver *drv, const uint32_t format, |
| struct format_metadata *metadata, uint64_t use_flags) |
| { |
| struct combination combo = { .format = format, |
| .metadata = *metadata, |
| .use_flags = use_flags }; |
| |
| drv_array_append(drv->combos, &combo); |
| } |
| |
| void drv_add_combinations(struct driver *drv, const uint32_t *formats, uint32_t num_formats, |
| struct format_metadata *metadata, uint64_t use_flags) |
| { |
| uint32_t i; |
| |
| for (i = 0; i < num_formats; i++) { |
| struct combination combo = { .format = formats[i], |
| .metadata = *metadata, |
| .use_flags = use_flags }; |
| |
| drv_array_append(drv->combos, &combo); |
| } |
| } |
| |
| void drv_modify_combination(struct driver *drv, uint32_t format, struct format_metadata *metadata, |
| uint64_t use_flags) |
| { |
| uint32_t i; |
| struct combination *combo; |
| /* Attempts to add the specified flags to an existing combination. */ |
| for (i = 0; i < drv_array_size(drv->combos); i++) { |
| combo = (struct combination *)drv_array_at_idx(drv->combos, i); |
| if (combo->format == format && combo->metadata.tiling == metadata->tiling && |
| combo->metadata.modifier == metadata->modifier) |
| combo->use_flags |= use_flags; |
| } |
| } |
| |
| int drv_modify_linear_combinations(struct driver *drv) |
| { |
| /* |
| * All current drivers can scanout linear XRGB8888/ARGB8888 as a primary |
| * plane and as a cursor. |
| */ |
| drv_modify_combination(drv, DRM_FORMAT_XRGB8888, &LINEAR_METADATA, |
| BO_USE_CURSOR | BO_USE_SCANOUT); |
| drv_modify_combination(drv, DRM_FORMAT_ARGB8888, &LINEAR_METADATA, |
| BO_USE_CURSOR | BO_USE_SCANOUT); |
| return 0; |
| } |
| |
| /* |
| * Pick the best modifier from modifiers, according to the ordering |
| * given by modifier_order. |
| */ |
| uint64_t drv_pick_modifier(const uint64_t *modifiers, uint32_t count, |
| const uint64_t *modifier_order, uint32_t order_count) |
| { |
| uint32_t i, j; |
| |
| for (i = 0; i < order_count; i++) { |
| for (j = 0; j < count; j++) { |
| if (modifiers[j] == modifier_order[i]) { |
| return modifiers[j]; |
| } |
| } |
| } |
| |
| return DRM_FORMAT_MOD_LINEAR; |
| } |
| |
| /* |
| * Search a list of modifiers to see if a given modifier is present |
| */ |
| bool drv_has_modifier(const uint64_t *list, uint32_t count, uint64_t modifier) |
| { |
| uint32_t i; |
| for (i = 0; i < count; i++) |
| if (list[i] == modifier) |
| return true; |
| |
| return false; |
| } |