| %define _binary_payload w9.gzdio |
| Name: mtools |
| Summary: mtools, read/write/list/format DOS disks under Unix |
| Version: 4.0.26 |
| Release: 1 |
| License: GPLv3+ |
| Group: Utilities/System |
| URL: http://www.gnu.org/software/mtools/ |
| Source: ftp://ftp.gnu.org/gnu/%{name}/%{name}-%{version}.tar.gz |
| Buildroot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) |
| |
| |
| %description |
| Mtools is a collection of utilities to access MS-DOS disks from GNU |
| and Unix without mounting them. It supports long file names, OS/2 Xdf |
| disks, ZIP/JAZ disks and 2m disks (store up to 1992k on a high density |
| 3 1/2 disk). |
| |
| |
| %prep |
| %setup -q |
| |
| ./configure \ |
| --prefix=%{buildroot}%{_prefix} \ |
| --sysconfdir=/etc \ |
| --infodir=%{buildroot}%{_infodir} \ |
| --mandir=%{buildroot}%{_mandir} \ |
| --enable-floppyd \ |
| |
| %build |
| make |
| |
| %clean |
| echo rm -rf $RPM_BUILD_ROOT |
| [ X%{buildroot} != X ] && [ X%{buildroot} != X/ ] && rm -fr %{buildroot} |
| |
| %install |
| make install |
| make install-info |
| strip %{buildroot}%{_bindir}/mtools %{buildroot}%{_bindir}/mkmanifest %{buildroot}%{_bindir}/floppyd |
| rm %{buildroot}%{_infodir}/dir |
| |
| %files |
| %defattr(-,root,root) |
| %{_infodir}/mtools.info* |
| %{_mandir}/man1/floppyd.1* |
| %{_mandir}/man1/floppyd_installtest.1.gz |
| %{_mandir}/man1/mattrib.1* |
| %{_mandir}/man1/mbadblocks.1* |
| %{_mandir}/man1/mcat.1* |
| %{_mandir}/man1/mcd.1* |
| %{_mandir}/man1/mclasserase.1* |
| %{_mandir}/man1/mcopy.1* |
| %{_mandir}/man1/mdel.1* |
| %{_mandir}/man1/mdeltree.1* |
| %{_mandir}/man1/mdir.1* |
| %{_mandir}/man1/mdu.1* |
| %{_mandir}/man1/mformat.1* |
| %{_mandir}/man1/minfo.1* |
| %{_mandir}/man1/mkmanifest.1* |
| %{_mandir}/man1/mlabel.1* |
| %{_mandir}/man1/mmd.1* |
| %{_mandir}/man1/mmount.1* |
| %{_mandir}/man1/mmove.1* |
| %{_mandir}/man1/mpartition.1* |
| %{_mandir}/man1/mrd.1* |
| %{_mandir}/man1/mren.1* |
| %{_mandir}/man1/mshortname.1* |
| %{_mandir}/man1/mshowfat.1* |
| %{_mandir}/man1/mtools.1* |
| %{_mandir}/man5/mtools.5* |
| %{_mandir}/man1/mtoolstest.1* |
| %{_mandir}/man1/mtype.1* |
| %{_mandir}/man1/mzip.1* |
| %{_bindir}/amuFormat.sh |
| %{_bindir}/mattrib |
| %{_bindir}/mbadblocks |
| %{_bindir}/mcat |
| %{_bindir}/mcd |
| %{_bindir}/mclasserase |
| %{_bindir}/mcopy |
| %{_bindir}/mdel |
| %{_bindir}/mdeltree |
| %{_bindir}/mdir |
| %{_bindir}/mdu |
| %{_bindir}/mformat |
| %{_bindir}/minfo |
| %{_bindir}/mkmanifest |
| %{_bindir}/mlabel |
| %{_bindir}/mmd |
| %{_bindir}/mmount |
| %{_bindir}/mmove |
| %{_bindir}/mpartition |
| %{_bindir}/mrd |
| %{_bindir}/mren |
| %{_bindir}/mshortname |
| %{_bindir}/mshowfat |
| %{_bindir}/mtools |
| %{_bindir}/mtoolstest |
| %{_bindir}/mtype |
| %{_bindir}/mzip |
| %{_bindir}/floppyd |
| %{_bindir}/floppyd_installtest |
| %{_bindir}/mcheck |
| %{_bindir}/mcomp |
| %{_bindir}/mxtar |
| %{_bindir}/tgz |
| %{_bindir}/uz |
| %{_bindir}/lz |
| %doc NEWS |
| |
| %pre |
| groupadd floppy 2>/dev/null || echo -n "" |
| |
| %post |
| if [ -f %{_bindir}/install-info ] ; then |
| if [ -f %{_infodir}/dir ] ; then |
| %{_bindir}/install-info %{_infodir}/mtools.info %{_infodir}/dir |
| fi |
| if [ -f %{_infodir}/dir.info ] ; then |
| %{_bindir}/install-info %{_infodir}/mtools.info %{_infodir}/dir.info |
| fi |
| fi |
| |
| |
| %preun |
| install-info --delete %{_infodir}/mtools.info %{_infodir}/dir.info |
| if [ -f %{_bindir}/install-info ] ; then |
| if [ -f %{_infodir}/dir ] ; then |
| %{_bindir}/install-info --delete %{_infodir}/mtools.info %{_infodir}/dir |
| fi |
| if [ -f %{_infodir}/dir.info ] ; then |
| %{_bindir}/install-info --delete %{_infodir}/mtools.info %{_infodir}/dir.info |
| fi |
| fi |
| |
| %changelog |
| * Sat Nov 28 2020 Alain Knaff <alain@knaff.lu> |
| - Fix compilation on Macintosh |
| - Ignore image file locking errors if we are performing a read-only access anyways |
| - Minor man-page fixes |
| * Sat Oct 24 2020 Alain Knaff <alain@knaff.lu> |
| - Preserve non-updated contents of info sector, just in case it contains program code |
| - When parsing config file, always use "C" locale for case-insensitive comparisons |
| * Sun Mar 22 2020 Alain Knaff <alain@knaff.lu> |
| - Spelling fixes in documentation |
| - Permit calling "make install" with >= -j2 |
| - Added AC_SYS_LARGEFILE, needed for compiling on certain ARM procs |
| * Sun Dec 09 2018 Alain Knaff <alain@knaff.lu> |
| - Address lots of compiler warnings (assignments between different types) |
| - Network speedup fixes for floppyd (TCP_CORK) |
| - Typo fixes |
| - Explicitly pass available target buffer size for character set conversions |
| * Sun Dec 02 2018 Alain Knaff <alain@knaff.lu> |
| - Fixed -f flag for mformat (size is KBytes, rather than sectors) |
| - Fixed toupper/tolower usage (unsigned char rather than plain signed) |
| * Sat Nov 24 2018 Alain Knaff <alain@knaff.lu> |
| - Fixed compilation for MingW |
| - After MingW compilation, make sure executable has .exe extension |
| - Addressed compiler warnings |
| - Fixed length handling in character set conversion (Unicode file names) |
| - Fixed matching of character range, when containing Unicode characters (mdir "c:test[α-ω].exe") |
| - Fixed initialization of my_scsi_cmd constructor |
| * Sun Nov 11 2018 Alain Knaff <alain@knaff.lu> |
| - initialize directory entries to 0 |
| - bad message "Too few sectors" replaced with "Too many sectors" |
| - apostrophe in mlabel no longer causes generation of long entry |
| - option to fake system date for file creation using the SOURCE_DATE_EPOCH environment variables |
| - can now be compiled with "clang" compiler |
| - fallback function for strndup, for those platforms that do not have it |
| - fixed a number of -Wextra warnings |
| - new compressed archive formats for uz/lz |
| - allow to specify number of reserved sectors for FAT32. |
| - file/device locking with timeout (rather than immediate failure) |
| - fixed support for BPB-less legacy formats. |
| - removed check that disk must be an integer number of tracks. |
| - removed .eh/.oh macros from manual pages |
| * Sat Sep 29 2018 Alain Knaff <alain@knaff.lu> |
| - Fix for short file names starting with character 0xE5 (by remapping it to 0x5) |
| - mpartition: Partition types closer to what Microsoft uses |
| - mformat: figure out LBA geometry as last resort if geometry |
| is neither specified in config and/or commandline, nor can be |
| queried from the device |
| - mformat: use same default cluster size by size as Microsoft for FAT32 |
| - additional sanity checks |
| - document how cluster size is picked in mformat.c man page |
| - document how partition types are picked in mpartition.c man page |
| * Wed Jan 09 2013 Alain Knaff <alain@knaff.lu> |
| - Fix for names of iconv encodings on AIX |
| - Fix mt_size_t on NetBSD |
| - Fixed compilation on Mingw |
| - Fixed doc (especially mformat) |
| - Fix mformating of FAT12 filesystems with huge cluster sizes |
| - Minfo prints image file name in mformat command line if an image |
| - file name was given |
| - Always generate gzip-compressed RPMs, in order to remain |
| - compatible with older distributions |
| - Fixed buffer overflow with drive letter in mclasserase |
| * Wed Jun 29 2011 Alain Knaff <alain@knaff.lu> |
| - mbadblocks now takes a list of bad blocks (either as sectors |
| or as clusters) |
| - mbadblocks now is able to do write scanning for bad blocks |
| - mshowfat can show cluster of specific offset |
| - Enable mtools to deal with very small sector sizes... |
| - Fixed encoding of all-lowercase names (no need to mangle |
| these) |
| - Consider every directory entry after an ENDMARK (0x00) to be deleted |
| - After writing a new entry at end of a directory, be sure to also add |
| an ENDMARK (0x00) |
| - Deal with possibility of a NULL pointer being returned by |
| localtime during timestamp conversion |
| * Sat Apr 16 2011 Alain Knaff <alain@knaff.lu> |
| - configure.in fixes |
| - fixed formatting of fat_size_calculation.tex document |
| - compatibility with current autoconfig versions |
| - Make it clear that label is limited to 11 characters |
| - Fixed typo in initialization of FAT32 info sector |
| * Sun Oct 17 2010 Alain Knaff <alain@knaff.lu> |
| - Added missing -i option to mshortname |
| * Sun Oct 17 2010 Alain Knaff <alain@knaff.lu> |
| - Released v4_0_14: |
| - New mshortname command |
| - Fix floppyd for disks bigger than 2 Gig |
| - Remove obsolete -z flag |
| - Remove now unsupported AC_USE_SYSTEM_EXTENSIONS |
| - Fixed output formatting of mdir if MTOOLS_DOTTED_DIR is set |
| - Mformat now correctly writes backup boot sector |
| - Fixed signedness of serial number in mlabel |
| - Fixed buffer size problem in mlabel |
| - Make mlabel write backup boot sector if FAT32 |
| - Catch situation where both clear and new label are given to mlabel |
| - Quote filename parameters to scripts |
| - Mformat: Close file descriptor for boot sector |
| - Added lzip support to scripts/uz |
| - Added Tot_sectors option to mformat |
| - Fixed hidden sector handling in mformat |
| - Minfo generates mformat command lines containing new -T option |
| - Mlabel prints error if label too long |
| * Sun Feb 28 2010 Alain Knaff <alain@knaff.lu> |
| - Merged Debian patches |
| * Tue Nov 03 2009 Alain Knaff <alain@knaff.lu> |
| - Mingw compatibility fixes |