'\" t
.TH mcopy 1 "28Nov20" mtools-4.0.26
.SH Name
mcopy - copy MSDOS files to/from Unix
'\" t
.de TQ
.br
.ns
.TP \\$1
..

.tr \(is'
.tr \(if`
.tr \(pd"

.SH Note\ of\ warning
This manpage has been automatically generated from mtools's texinfo
documentation, and may not be entirely accurate or complete.  See the
end of this man page for details.
.PP
.SH Description
.PP
The \fR\&\f(CWmcopy\fR command is used to copy MS-DOS files to and from
Unix. It uses the following syntax:
.PP
 
.nf
.ft 3
.in +0.3i
\&\fR\&\f(CWmcopy [\fR\&\f(CW-bspanvmQT] [\fR\&\f(CW-D \fIclash_option\fR\&\f(CW] \fIsourcefile\fR\&\f(CW \fItargetfile\fR\&\f(CW
\&\fR\&\f(CWmcopy [\fR\&\f(CW-bspanvmQT] [\fR\&\f(CW-D \fIclash_option\fR\&\f(CW] \fIsourcefile\fR\&\f(CW [ \fIsourcefiles\fR\&\f(CW\&... ] \fItargetdirectory\fR\&\f(CW
\&\fR\&\f(CWmcopy [\fR\&\f(CW-tnvm] \fIMSDOSsourcefile\fR\&\f(CW
.fi
.in -0.3i
.ft R
.PP
 
\&\fR
.PP
\&\fR\&\f(CWMcopy\fR copies the specified file to the named file, or copies
multiple files to the named directory.  The source and target can be
either MS-DOS or Unix files.
.PP
The use of a drive letter designation on the MS-DOS files, 'a:' for
example, determines the direction of the transfer.  A missing drive
designation implies a Unix file whose path starts in the current
directory.  If a source drive letter is specified with no attached file
name (e.g. \fR\&\f(CWmcopy a: .\fR), all files are copied from that drive.
.PP
If only a single, MS-DOS source parameter is provided (e.g. "mcopy
a:foo.exe"), an implied destination of the current directory
(`\fR\&\f(CW.\fR') is assumed.
.PP
A filename of `\fR\&\f(CW-\fR' means standard input or standard output, depending
on its position on the command line.
.PP
\&\fR\&\f(CWMcopy\fR accepts the following command line options:
.TP
\&\fR\&\f(CWt\fR\ 
Text file transfer.  Mcopy translates incoming carriage return/line
feeds to line feeds when copying from MS-DOS to Unix, and vice-versa when
copying from Unix to MS-DOS.
.TP
\&\fR\&\f(CWb\fR\ 
Batch mode. Optimized for huge recursive copies, but less secure if a
crash happens during the copy.
.TP
\&\fR\&\f(CWs\fR\ 
Recursive copy.  Also copies directories and their contents
.TP
\&\fR\&\f(CWp\fR\ 
Preserves the attributes of the copied files
.TP
\&\fR\&\f(CWQ\fR\ 
When mcopying multiple files, quits as soon as one copy fails (for
example due to lacking storage space on the target disk)
.TP
\&\fR\&\f(CWa\fR\ 
Text (ASCII) file transfer.  \fR\&\f(CWASCII\fR translates incoming carriage
return/line feeds to line feeds.
.TP
\&\fR\&\f(CWT\fR\ 
Text (ASCII) file transfer with character set conversion.  Differs from
\&\fR\&\f(CW-a\fR in the \fR\&\f(CWASCII\fR also translates incoming PC-8 characters
to ISO-8859-1 equivalents as far as possible.  When reading DOS files,
untranslatable characters are replaced by '\fR\&\f(CW#\fR'; when writing DOS files,
untranslatable characters are replaced by '\fR\&\f(CW.\fR'.
.TP
\&\fR\&\f(CWn\fR\ 
No confirmation when overwriting Unix files.  \fR\&\f(CWASCII\fR doesn't
warn the user when overwriting an existing Unix file. If the target
file already exists, and the \fR\&\f(CW-n\fR option is not in effect,
\&\fR\&\f(CWmcopy\fR asks whether to overwrite the file or to rename the new
file (see \(ifname clashes\(is) for details).  In order to switch off
confirmation for DOS files, use \fR\&\f(CW-o\fR.
.TP
\&\fR\&\f(CWm\fR\ 
Preserve the file modification time.
.TP
\&\fR\&\f(CWv\fR\ 
Verbose. Displays the name of each file as it is copied.
.PP
.SH Bugs
Unlike MS-DOS, the '+' operator (append) from MS-DOS is not
supported. However, you may use \fR\&\f(CWmtype\fR to produce the same effect:
 
.nf
.ft 3
.in +0.3i
mtype a:file1 a:file2 a:file3 >unixfile
mtype a:file1 a:file2 a:file3 | mcopy - a:msdosfile
.fi
.in -0.3i
.ft R
.PP
 
\&\fR
.PP
.SH See\ Also
Mtools' texinfo doc
.SH Viewing\ the\ texi\ doc
This manpage has been automatically generated from mtools's texinfo
documentation. However, this process is only approximative, and some
items, such as crossreferences, footnotes and indices are lost in this
translation process.  Indeed, these items have no appropriate
representation in the manpage format.  Moreover, not all information has
been translated into the manpage version.  Thus I strongly advise you to
use the original texinfo doc.  See the end of this manpage for
instructions how to view the texinfo doc.
.TP
* \ \ 
To generate a printable copy from the texinfo doc, run the following
commands:
 
.nf
.ft 3
.in +0.3i
    ./configure; make dvi; dvips mtools.dvi
.fi
.in -0.3i
.ft R
.PP
 
\&\fR
.TP
* \ \ 
To generate a html copy,  run:
 
.nf
.ft 3
.in +0.3i
    ./configure; make html
.fi
.in -0.3i
.ft R
.PP
 
\&\fRA premade html can be found at
\&\fR\&\f(CW\(ifhttp://www.gnu.org/software/mtools/manual/mtools.html\(is\fR
.TP
* \ \ 
To generate an info copy (browsable using emacs' info mode), run:
 
.nf
.ft 3
.in +0.3i
    ./configure; make info
.fi
.in -0.3i
.ft R
.PP
 
\&\fR
.PP
The texinfo doc looks most pretty when printed or as html.  Indeed, in
the info version certain examples are difficult to read due to the
quoting conventions used in info.
.PP