blob: 46e89bc0cb27d5e94fd731846e7fc3444d8bcea8 [file] [log] [blame]
/*
* Author: Tatu Ylonen <ylo@cs.hut.fi>
* Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
* All rights reserved
* This file contains code implementing the packet protocol and communication
* with the other side. This same code is used both on client and server side.
*
* As far as I am concerned, the code I have written for this software
* can be used freely for any purpose. Any derived versions of this
* software must be clearly marked as such, and if the derived work is
* incompatible with the protocol description in the RFC file, it must be
* called by a name other than "ssh" or "Secure Shell".
*
*
* SSH2 packet format added by Markus Friedl.
* Copyright (c) 2000 Markus Friedl. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "includes.h"
RCSID("$OpenBSD: packet.c,v 1.50 2001/02/11 12:59:25 markus Exp $");
#include "xmalloc.h"
#include "buffer.h"
#include "packet.h"
#include "bufaux.h"
#include "crc32.h"
#include "getput.h"
#include "compress.h"
#include "deattack.h"
#include "channels.h"
#include "compat.h"
#include "ssh1.h"
#include "ssh2.h"
#include "cipher.h"
#include "kex.h"
#include "mac.h"
#include "log.h"
#include "canohost.h"
#ifdef PACKET_DEBUG
#define DBG(x) x
#else
#define DBG(x)
#endif
/*
* This variable contains the file descriptors used for communicating with
* the other side. connection_in is used for reading; connection_out for
* writing. These can be the same descriptor, in which case it is assumed to
* be a socket.
*/
static int connection_in = -1;
static int connection_out = -1;
/*
* Cipher type. This value is only used to determine whether to pad the
* packets with zeroes or random data.
*/
static int cipher_type = SSH_CIPHER_NONE;
/* Protocol flags for the remote side. */
static u_int remote_protocol_flags = 0;
/* Encryption context for receiving data. This is only used for decryption. */
static CipherContext receive_context;
/* Encryption context for sending data. This is only used for encryption. */
static CipherContext send_context;
/* Buffer for raw input data from the socket. */
static Buffer input;
/* Buffer for raw output data going to the socket. */
static Buffer output;
/* Buffer for the partial outgoing packet being constructed. */
static Buffer outgoing_packet;
/* Buffer for the incoming packet currently being processed. */
static Buffer incoming_packet;
/* Scratch buffer for packet compression/decompression. */
static Buffer compression_buffer;
/* Flag indicating whether packet compression/decompression is enabled. */
static int packet_compression = 0;
/* default maximum packet size */
int max_packet_size = 32768;
/* Flag indicating whether this module has been initialized. */
static int initialized = 0;
/* Set to true if the connection is interactive. */
static int interactive_mode = 0;
/* True if SSH2 packet format is used */
int use_ssh2_packet_format = 0;
/* Session key information for Encryption and MAC */
Kex *kex = NULL;
void
packet_set_kex(Kex *k)
{
if( k->mac[MODE_IN ].key == NULL ||
k->enc[MODE_IN ].key == NULL ||
k->enc[MODE_IN ].iv == NULL ||
k->mac[MODE_OUT].key == NULL ||
k->enc[MODE_OUT].key == NULL ||
k->enc[MODE_OUT].iv == NULL)
fatal("bad KEX");
kex = k;
}
void
clear_enc_keys(Enc *enc, int len)
{
memset(enc->iv, 0, len);
memset(enc->key, 0, len);
xfree(enc->iv);
xfree(enc->key);
enc->iv = NULL;
enc->key = NULL;
}
void
packet_set_ssh2_format(void)
{
DBG(debug("use_ssh2_packet_format"));
use_ssh2_packet_format = 1;
}
/*
* Sets the descriptors used for communication. Disables encryption until
* packet_set_encryption_key is called.
*/
void
packet_set_connection(int fd_in, int fd_out)
{
Cipher *none = cipher_by_name("none");
if (none == NULL)
fatal("packet_set_connection: cannot load cipher 'none'");
connection_in = fd_in;
connection_out = fd_out;
cipher_type = SSH_CIPHER_NONE;
cipher_init(&send_context, none, (u_char *) "", 0, NULL, 0);
cipher_init(&receive_context, none, (u_char *) "", 0, NULL, 0);
if (!initialized) {
initialized = 1;
buffer_init(&input);
buffer_init(&output);
buffer_init(&outgoing_packet);
buffer_init(&incoming_packet);
}
/* Kludge: arrange the close function to be called from fatal(). */
fatal_add_cleanup((void (*) (void *)) packet_close, NULL);
}
/* Returns 1 if remote host is connected via socket, 0 if not. */
int
packet_connection_is_on_socket()
{
struct sockaddr_storage from, to;
socklen_t fromlen, tolen;
/* filedescriptors in and out are the same, so it's a socket */
if (connection_in == connection_out)
return 1;
fromlen = sizeof(from);
memset(&from, 0, sizeof(from));
if (getpeername(connection_in, (struct sockaddr *)&from, &fromlen) < 0)
return 0;
tolen = sizeof(to);
memset(&to, 0, sizeof(to));
if (getpeername(connection_out, (struct sockaddr *)&to, &tolen) < 0)
return 0;
if (fromlen != tolen || memcmp(&from, &to, fromlen) != 0)
return 0;
if (from.ss_family != AF_INET && from.ss_family != AF_INET6)
return 0;
return 1;
}
/* returns 1 if connection is via ipv4 */
int
packet_connection_is_ipv4()
{
struct sockaddr_storage to;
socklen_t tolen = sizeof(to);
memset(&to, 0, sizeof(to));
if (getsockname(connection_out, (struct sockaddr *)&to, &tolen) < 0)
return 0;
if (to.ss_family != AF_INET)
return 0;
return 1;
}
/* Sets the connection into non-blocking mode. */
void
packet_set_nonblocking()
{
/* Set the socket into non-blocking mode. */
if (fcntl(connection_in, F_SETFL, O_NONBLOCK) < 0)
error("fcntl O_NONBLOCK: %.100s", strerror(errno));
if (connection_out != connection_in) {
if (fcntl(connection_out, F_SETFL, O_NONBLOCK) < 0)
error("fcntl O_NONBLOCK: %.100s", strerror(errno));
}
}
/* Returns the socket used for reading. */
int
packet_get_connection_in()
{
return connection_in;
}
/* Returns the descriptor used for writing. */
int
packet_get_connection_out()
{
return connection_out;
}
/* Closes the connection and clears and frees internal data structures. */
void
packet_close()
{
if (!initialized)
return;
initialized = 0;
if (connection_in == connection_out) {
shutdown(connection_out, SHUT_RDWR);
close(connection_out);
} else {
close(connection_in);
close(connection_out);
}
buffer_free(&input);
buffer_free(&output);
buffer_free(&outgoing_packet);
buffer_free(&incoming_packet);
if (packet_compression) {
buffer_free(&compression_buffer);
buffer_compress_uninit();
}
}
/* Sets remote side protocol flags. */
void
packet_set_protocol_flags(u_int protocol_flags)
{
remote_protocol_flags = protocol_flags;
channel_set_options((protocol_flags & SSH_PROTOFLAG_HOST_IN_FWD_OPEN) != 0);
}
/* Returns the remote protocol flags set earlier by the above function. */
u_int
packet_get_protocol_flags()
{
return remote_protocol_flags;
}
/*
* Starts packet compression from the next packet on in both directions.
* Level is compression level 1 (fastest) - 9 (slow, best) as in gzip.
*/
/*** XXXXX todo: kex means re-init */
void
packet_start_compression(int level)
{
if (packet_compression)
fatal("Compression already enabled.");
packet_compression = 1;
buffer_init(&compression_buffer);
buffer_compress_init(level);
}
/*
* Encrypts the given number of bytes, copying from src to dest. bytes is
* known to be a multiple of 8.
*/
void
packet_encrypt(CipherContext * cc, void *dest, void *src,
u_int bytes)
{
cipher_encrypt(cc, dest, src, bytes);
}
/*
* Decrypts the given number of bytes, copying from src to dest. bytes is
* known to be a multiple of 8.
*/
void
packet_decrypt(CipherContext *context, void *dest, void *src, u_int bytes)
{
/*
* Cryptographic attack detector for ssh - Modifications for packet.c
* (C)1998 CORE-SDI, Buenos Aires Argentina Ariel Futoransky(futo@core-sdi.com)
*/
if (!compat20 &&
context->cipher->number != SSH_CIPHER_NONE &&
detect_attack(src, bytes, NULL) == DEATTACK_DETECTED)
packet_disconnect("crc32 compensation attack: network attack detected");
cipher_decrypt(context, dest, src, bytes);
}
/*
* Causes any further packets to be encrypted using the given key. The same
* key is used for both sending and reception. However, both directions are
* encrypted independently of each other.
*/
void
packet_set_encryption_key(const u_char *key, u_int keylen,
int number)
{
Cipher *cipher = cipher_by_number(number);
if (cipher == NULL)
fatal("packet_set_encryption_key: unknown cipher number %d", number);
if (keylen < 20)
fatal("packet_set_encryption_key: keylen too small: %d", keylen);
cipher_init(&receive_context, cipher, key, keylen, NULL, 0);
cipher_init(&send_context, cipher, key, keylen, NULL, 0);
}
/* Starts constructing a packet to send. */
void
packet_start1(int type)
{
char buf[9];
buffer_clear(&outgoing_packet);
memset(buf, 0, 8);
buf[8] = type;
buffer_append(&outgoing_packet, buf, 9);
}
void
packet_start2(int type)
{
char buf[4+1+1];
buffer_clear(&outgoing_packet);
memset(buf, 0, sizeof buf);
/* buf[0..3] = payload_len; */
/* buf[4] = pad_len; */
buf[5] = type & 0xff;
buffer_append(&outgoing_packet, buf, sizeof buf);
}
void
packet_start(int type)
{
DBG(debug("packet_start[%d]",type));
if (use_ssh2_packet_format)
packet_start2(type);
else
packet_start1(type);
}
/* Appends a character to the packet data. */
void
packet_put_char(int value)
{
char ch = value;
buffer_append(&outgoing_packet, &ch, 1);
}
/* Appends an integer to the packet data. */
void
packet_put_int(u_int value)
{
buffer_put_int(&outgoing_packet, value);
}
/* Appends a string to packet data. */
void
packet_put_string(const char *buf, u_int len)
{
buffer_put_string(&outgoing_packet, buf, len);
}
void
packet_put_cstring(const char *str)
{
buffer_put_string(&outgoing_packet, str, strlen(str));
}
void
packet_put_raw(const char *buf, u_int len)
{
buffer_append(&outgoing_packet, buf, len);
}
/* Appends an arbitrary precision integer to packet data. */
void
packet_put_bignum(BIGNUM * value)
{
buffer_put_bignum(&outgoing_packet, value);
}
void
packet_put_bignum2(BIGNUM * value)
{
buffer_put_bignum2(&outgoing_packet, value);
}
/*
* Finalizes and sends the packet. If the encryption key has been set,
* encrypts the packet before sending.
*/
void
packet_send1(void)
{
char buf[8], *cp;
int i, padding, len;
u_int checksum;
u_int32_t rand = 0;
/*
* If using packet compression, compress the payload of the outgoing
* packet.
*/
if (packet_compression) {
buffer_clear(&compression_buffer);
/* Skip padding. */
buffer_consume(&outgoing_packet, 8);
/* padding */
buffer_append(&compression_buffer, "\0\0\0\0\0\0\0\0", 8);
buffer_compress(&outgoing_packet, &compression_buffer);
buffer_clear(&outgoing_packet);
buffer_append(&outgoing_packet, buffer_ptr(&compression_buffer),
buffer_len(&compression_buffer));
}
/* Compute packet length without padding (add checksum, remove padding). */
len = buffer_len(&outgoing_packet) + 4 - 8;
/* Insert padding. Initialized to zero in packet_start1() */
padding = 8 - len % 8;
if (cipher_type != SSH_CIPHER_NONE) {
cp = buffer_ptr(&outgoing_packet);
for (i = 0; i < padding; i++) {
if (i % 4 == 0)
rand = arc4random();
cp[7 - i] = rand & 0xff;
rand >>= 8;
}
}
buffer_consume(&outgoing_packet, 8 - padding);
/* Add check bytes. */
checksum = ssh_crc32((u_char *) buffer_ptr(&outgoing_packet),
buffer_len(&outgoing_packet));
PUT_32BIT(buf, checksum);
buffer_append(&outgoing_packet, buf, 4);
#ifdef PACKET_DEBUG
fprintf(stderr, "packet_send plain: ");
buffer_dump(&outgoing_packet);
#endif
/* Append to output. */
PUT_32BIT(buf, len);
buffer_append(&output, buf, 4);
buffer_append_space(&output, &cp, buffer_len(&outgoing_packet));
packet_encrypt(&send_context, cp, buffer_ptr(&outgoing_packet),
buffer_len(&outgoing_packet));
#ifdef PACKET_DEBUG
fprintf(stderr, "encrypted: ");
buffer_dump(&output);
#endif
buffer_clear(&outgoing_packet);
/*
* Note that the packet is now only buffered in output. It won\'t be
* actually sent until packet_write_wait or packet_write_poll is
* called.
*/
}
/*
* Finalize packet in SSH2 format (compress, mac, encrypt, enqueue)
*/
void
packet_send2(void)
{
static u_int32_t seqnr = 0;
u_char *macbuf = NULL;
char *cp;
u_int packet_length = 0;
u_int i, padlen, len;
u_int32_t rand = 0;
int type;
Enc *enc = NULL;
Mac *mac = NULL;
Comp *comp = NULL;
int block_size;
if (kex != NULL) {
enc = &kex->enc[MODE_OUT];
mac = &kex->mac[MODE_OUT];
comp = &kex->comp[MODE_OUT];
}
block_size = enc ? enc->cipher->block_size : 8;
cp = buffer_ptr(&outgoing_packet);
type = cp[5] & 0xff;
#ifdef PACKET_DEBUG
fprintf(stderr, "plain: ");
buffer_dump(&outgoing_packet);
#endif
if (comp && comp->enabled) {
len = buffer_len(&outgoing_packet);
/* skip header, compress only payload */
buffer_consume(&outgoing_packet, 5);
buffer_clear(&compression_buffer);
buffer_compress(&outgoing_packet, &compression_buffer);
buffer_clear(&outgoing_packet);
buffer_append(&outgoing_packet, "\0\0\0\0\0", 5);
buffer_append(&outgoing_packet, buffer_ptr(&compression_buffer),
buffer_len(&compression_buffer));
DBG(debug("compression: raw %d compressed %d", len,
buffer_len(&outgoing_packet)));
}
/* sizeof (packet_len + pad_len + payload) */
len = buffer_len(&outgoing_packet);
/*
* calc size of padding, alloc space, get random data,
* minimum padding is 4 bytes
*/
padlen = block_size - (len % block_size);
if (padlen < 4)
padlen += block_size;
buffer_append_space(&outgoing_packet, &cp, padlen);
if (enc && enc->cipher->number != SSH_CIPHER_NONE) {
/* random padding */
for (i = 0; i < padlen; i++) {
if (i % 4 == 0)
rand = arc4random();
cp[i] = rand & 0xff;
rand <<= 8;
}
} else {
/* clear padding */
memset(cp, 0, padlen);
}
/* packet_length includes payload, padding and padding length field */
packet_length = buffer_len(&outgoing_packet) - 4;
cp = buffer_ptr(&outgoing_packet);
PUT_32BIT(cp, packet_length);
cp[4] = padlen & 0xff;
DBG(debug("send: len %d (includes padlen %d)", packet_length+4, padlen));
/* compute MAC over seqnr and packet(length fields, payload, padding) */
if (mac && mac->enabled) {
macbuf = mac_compute(mac, seqnr,
(u_char *) buffer_ptr(&outgoing_packet),
buffer_len(&outgoing_packet));
DBG(debug("done calc MAC out #%d", seqnr));
}
/* encrypt packet and append to output buffer. */
buffer_append_space(&output, &cp, buffer_len(&outgoing_packet));
packet_encrypt(&send_context, cp, buffer_ptr(&outgoing_packet),
buffer_len(&outgoing_packet));
/* append unencrypted MAC */
if (mac && mac->enabled)
buffer_append(&output, (char *)macbuf, mac->mac_len);
#ifdef PACKET_DEBUG
fprintf(stderr, "encrypted: ");
buffer_dump(&output);
#endif
/* increment sequence number for outgoing packets */
if (++seqnr == 0)
log("outgoing seqnr wraps around");
buffer_clear(&outgoing_packet);
if (type == SSH2_MSG_NEWKEYS) {
if (kex==NULL || mac==NULL || enc==NULL || comp==NULL)
fatal("packet_send2: no KEX");
if (mac->md != NULL)
mac->enabled = 1;
DBG(debug("cipher_init send_context"));
cipher_init(&send_context, enc->cipher,
enc->key, enc->cipher->key_len,
enc->iv, enc->cipher->block_size);
clear_enc_keys(enc, kex->we_need);
if (comp->type != 0 && comp->enabled == 0) {
comp->enabled = 1;
if (! packet_compression)
packet_start_compression(6);
}
}
}
void
packet_send()
{
if (use_ssh2_packet_format)
packet_send2();
else
packet_send1();
DBG(debug("packet_send done"));
}
/*
* Waits until a packet has been received, and returns its type. Note that
* no other data is processed until this returns, so this function should not
* be used during the interactive session.
*/
int
packet_read(int *payload_len_ptr)
{
int type, len;
fd_set set;
char buf[8192];
DBG(debug("packet_read()"));
/* Since we are blocking, ensure that all written packets have been sent. */
packet_write_wait();
/* Stay in the loop until we have received a complete packet. */
for (;;) {
/* Try to read a packet from the buffer. */
type = packet_read_poll(payload_len_ptr);
if (!use_ssh2_packet_format && (
type == SSH_SMSG_SUCCESS
|| type == SSH_SMSG_FAILURE
|| type == SSH_CMSG_EOF
|| type == SSH_CMSG_EXIT_CONFIRMATION))
packet_integrity_check(*payload_len_ptr, 0, type);
/* If we got a packet, return it. */
if (type != SSH_MSG_NONE)
return type;
/*
* Otherwise, wait for some data to arrive, add it to the
* buffer, and try again.
*/
FD_ZERO(&set);
FD_SET(connection_in, &set);
/* Wait for some data to arrive. */
select(connection_in + 1, &set, NULL, NULL, NULL);
/* Read data from the socket. */
len = read(connection_in, buf, sizeof(buf));
if (len == 0) {
log("Connection closed by %.200s", get_remote_ipaddr());
fatal_cleanup();
}
if (len < 0)
fatal("Read from socket failed: %.100s", strerror(errno));
/* Append it to the buffer. */
packet_process_incoming(buf, len);
}
/* NOTREACHED */
}
/*
* Waits until a packet has been received, verifies that its type matches
* that given, and gives a fatal error and exits if there is a mismatch.
*/
void
packet_read_expect(int *payload_len_ptr, int expected_type)
{
int type;
type = packet_read(payload_len_ptr);
if (type != expected_type)
packet_disconnect("Protocol error: expected packet type %d, got %d",
expected_type, type);
}
/* Checks if a full packet is available in the data received so far via
* packet_process_incoming. If so, reads the packet; otherwise returns
* SSH_MSG_NONE. This does not wait for data from the connection.
*
* SSH_MSG_DISCONNECT is handled specially here. Also,
* SSH_MSG_IGNORE messages are skipped by this function and are never returned
* to higher levels.
*
* The returned payload_len does include space consumed by:
* Packet length
* Padding
* Packet type
* Check bytes
*/
int
packet_read_poll1(int *payload_len_ptr)
{
u_int len, padded_len;
u_char *ucp;
char buf[8], *cp;
u_int checksum, stored_checksum;
/* Check if input size is less than minimum packet size. */
if (buffer_len(&input) < 4 + 8)
return SSH_MSG_NONE;
/* Get length of incoming packet. */
ucp = (u_char *) buffer_ptr(&input);
len = GET_32BIT(ucp);
if (len < 1 + 2 + 2 || len > 256 * 1024)
packet_disconnect("Bad packet length %d.", len);
padded_len = (len + 8) & ~7;
/* Check if the packet has been entirely received. */
if (buffer_len(&input) < 4 + padded_len)
return SSH_MSG_NONE;
/* The entire packet is in buffer. */
/* Consume packet length. */
buffer_consume(&input, 4);
/* Copy data to incoming_packet. */
buffer_clear(&incoming_packet);
buffer_append_space(&incoming_packet, &cp, padded_len);
packet_decrypt(&receive_context, cp, buffer_ptr(&input), padded_len);
buffer_consume(&input, padded_len);
#ifdef PACKET_DEBUG
fprintf(stderr, "read_poll plain: ");
buffer_dump(&incoming_packet);
#endif
/* Compute packet checksum. */
checksum = ssh_crc32((u_char *) buffer_ptr(&incoming_packet),
buffer_len(&incoming_packet) - 4);
/* Skip padding. */
buffer_consume(&incoming_packet, 8 - len % 8);
/* Test check bytes. */
if (len != buffer_len(&incoming_packet))
packet_disconnect("packet_read_poll: len %d != buffer_len %d.",
len, buffer_len(&incoming_packet));
ucp = (u_char *) buffer_ptr(&incoming_packet) + len - 4;
stored_checksum = GET_32BIT(ucp);
if (checksum != stored_checksum)
packet_disconnect("Corrupted check bytes on input.");
buffer_consume_end(&incoming_packet, 4);
/* If using packet compression, decompress the packet. */
if (packet_compression) {
buffer_clear(&compression_buffer);
buffer_uncompress(&incoming_packet, &compression_buffer);
buffer_clear(&incoming_packet);
buffer_append(&incoming_packet, buffer_ptr(&compression_buffer),
buffer_len(&compression_buffer));
}
/* Get packet type. */
buffer_get(&incoming_packet, &buf[0], 1);
/* Return length of payload (without type field). */
*payload_len_ptr = buffer_len(&incoming_packet);
/* Return type. */
return (u_char) buf[0];
}
int
packet_read_poll2(int *payload_len_ptr)
{
static u_int32_t seqnr = 0;
static u_int packet_length = 0;
u_int padlen, need;
u_char buf[8], *macbuf;
u_char *ucp;
char *cp;
int type;
int maclen, block_size;
Enc *enc = NULL;
Mac *mac = NULL;
Comp *comp = NULL;
if (kex != NULL) {
enc = &kex->enc[MODE_IN];
mac = &kex->mac[MODE_IN];
comp = &kex->comp[MODE_IN];
}
maclen = mac && mac->enabled ? mac->mac_len : 0;
block_size = enc ? enc->cipher->block_size : 8;
if (packet_length == 0) {
/*
* check if input size is less than the cipher block size,
* decrypt first block and extract length of incoming packet
*/
if (buffer_len(&input) < block_size)
return SSH_MSG_NONE;
buffer_clear(&incoming_packet);
buffer_append_space(&incoming_packet, &cp, block_size);
packet_decrypt(&receive_context, cp, buffer_ptr(&input),
block_size);
ucp = (u_char *) buffer_ptr(&incoming_packet);
packet_length = GET_32BIT(ucp);
if (packet_length < 1 + 4 || packet_length > 256 * 1024) {
buffer_dump(&incoming_packet);
packet_disconnect("Bad packet length %d.", packet_length);
}
DBG(debug("input: packet len %d", packet_length+4));
buffer_consume(&input, block_size);
}
/* we have a partial packet of block_size bytes */
need = 4 + packet_length - block_size;
DBG(debug("partial packet %d, need %d, maclen %d", block_size,
need, maclen));
if (need % block_size != 0)
fatal("padding error: need %d block %d mod %d",
need, block_size, need % block_size);
/*
* check if the entire packet has been received and
* decrypt into incoming_packet
*/
if (buffer_len(&input) < need + maclen)
return SSH_MSG_NONE;
#ifdef PACKET_DEBUG
fprintf(stderr, "read_poll enc/full: ");
buffer_dump(&input);
#endif
buffer_append_space(&incoming_packet, &cp, need);
packet_decrypt(&receive_context, cp, buffer_ptr(&input), need);
buffer_consume(&input, need);
/*
* compute MAC over seqnr and packet,
* increment sequence number for incoming packet
*/
if (mac && mac->enabled) {
macbuf = mac_compute(mac, seqnr,
(u_char *) buffer_ptr(&incoming_packet),
buffer_len(&incoming_packet));
if (memcmp(macbuf, buffer_ptr(&input), mac->mac_len) != 0)
packet_disconnect("Corrupted MAC on input.");
DBG(debug("MAC #%d ok", seqnr));
buffer_consume(&input, mac->mac_len);
}
if (++seqnr == 0)
log("incoming seqnr wraps around");
/* get padlen */
cp = buffer_ptr(&incoming_packet) + 4;
padlen = *cp & 0xff;
DBG(debug("input: padlen %d", padlen));
if (padlen < 4)
packet_disconnect("Corrupted padlen %d on input.", padlen);
/* skip packet size + padlen, discard padding */
buffer_consume(&incoming_packet, 4 + 1);
buffer_consume_end(&incoming_packet, padlen);
DBG(debug("input: len before de-compress %d", buffer_len(&incoming_packet)));
if (comp && comp->enabled) {
buffer_clear(&compression_buffer);
buffer_uncompress(&incoming_packet, &compression_buffer);
buffer_clear(&incoming_packet);
buffer_append(&incoming_packet, buffer_ptr(&compression_buffer),
buffer_len(&compression_buffer));
DBG(debug("input: len after de-compress %d", buffer_len(&incoming_packet)));
}
/*
* get packet type, implies consume.
* return length of payload (without type field)
*/
buffer_get(&incoming_packet, (char *)&buf[0], 1);
*payload_len_ptr = buffer_len(&incoming_packet);
/* reset for next packet */
packet_length = 0;
/* extract packet type */
type = (u_char)buf[0];
if (type == SSH2_MSG_NEWKEYS) {
if (kex==NULL || mac==NULL || enc==NULL || comp==NULL)
fatal("packet_read_poll2: no KEX");
if (mac->md != NULL)
mac->enabled = 1;
DBG(debug("cipher_init receive_context"));
cipher_init(&receive_context, enc->cipher,
enc->key, enc->cipher->key_len,
enc->iv, enc->cipher->block_size);
clear_enc_keys(enc, kex->we_need);
if (comp->type != 0 && comp->enabled == 0) {
comp->enabled = 1;
if (! packet_compression)
packet_start_compression(6);
}
}
#ifdef PACKET_DEBUG
fprintf(stderr, "read/plain[%d]:\r\n",type);
buffer_dump(&incoming_packet);
#endif
return (u_char)type;
}
int
packet_read_poll(int *payload_len_ptr)
{
char *msg;
for (;;) {
int type = use_ssh2_packet_format ?
packet_read_poll2(payload_len_ptr):
packet_read_poll1(payload_len_ptr);
if(compat20) {
int reason;
if (type != 0)
DBG(debug("received packet type %d", type));
switch(type) {
case SSH2_MSG_IGNORE:
break;
case SSH2_MSG_DEBUG:
packet_get_char();
msg = packet_get_string(NULL);
debug("Remote: %.900s", msg);
xfree(msg);
msg = packet_get_string(NULL);
xfree(msg);
break;
case SSH2_MSG_DISCONNECT:
reason = packet_get_int();
msg = packet_get_string(NULL);
log("Received disconnect from %s: %d: %.400s", get_remote_ipaddr(),
reason, msg);
xfree(msg);
fatal_cleanup();
break;
default:
return type;
break;
}
} else {
switch(type) {
case SSH_MSG_IGNORE:
break;
case SSH_MSG_DEBUG:
msg = packet_get_string(NULL);
debug("Remote: %.900s", msg);
xfree(msg);
break;
case SSH_MSG_DISCONNECT:
msg = packet_get_string(NULL);
log("Received disconnect from %s: %.400s", get_remote_ipaddr(),
msg);
fatal_cleanup();
xfree(msg);
break;
default:
if (type != 0)
DBG(debug("received packet type %d", type));
return type;
break;
}
}
}
}
/*
* Buffers the given amount of input characters. This is intended to be used
* together with packet_read_poll.
*/
void
packet_process_incoming(const char *buf, u_int len)
{
buffer_append(&input, buf, len);
}
/* Returns a character from the packet. */
u_int
packet_get_char()
{
char ch;
buffer_get(&incoming_packet, &ch, 1);
return (u_char) ch;
}
/* Returns an integer from the packet data. */
u_int
packet_get_int()
{
return buffer_get_int(&incoming_packet);
}
/*
* Returns an arbitrary precision integer from the packet data. The integer
* must have been initialized before this call.
*/
void
packet_get_bignum(BIGNUM * value, int *length_ptr)
{
*length_ptr = buffer_get_bignum(&incoming_packet, value);
}
void
packet_get_bignum2(BIGNUM * value, int *length_ptr)
{
*length_ptr = buffer_get_bignum2(&incoming_packet, value);
}
char *
packet_get_raw(int *length_ptr)
{
int bytes = buffer_len(&incoming_packet);
if (length_ptr != NULL)
*length_ptr = bytes;
return buffer_ptr(&incoming_packet);
}
int
packet_remaining(void)
{
return buffer_len(&incoming_packet);
}
/*
* Returns a string from the packet data. The string is allocated using
* xmalloc; it is the responsibility of the calling program to free it when
* no longer needed. The length_ptr argument may be NULL, or point to an
* integer into which the length of the string is stored.
*/
char *
packet_get_string(u_int *length_ptr)
{
return buffer_get_string(&incoming_packet, length_ptr);
}
/*
* Sends a diagnostic message from the server to the client. This message
* can be sent at any time (but not while constructing another message). The
* message is printed immediately, but only if the client is being executed
* in verbose mode. These messages are primarily intended to ease debugging
* authentication problems. The length of the formatted message must not
* exceed 1024 bytes. This will automatically call packet_write_wait.
*/
void
packet_send_debug(const char *fmt,...)
{
char buf[1024];
va_list args;
if (compat20 && (datafellows & SSH_BUG_DEBUG))
return;
va_start(args, fmt);
vsnprintf(buf, sizeof(buf), fmt, args);
va_end(args);
if (compat20) {
packet_start(SSH2_MSG_DEBUG);
packet_put_char(0); /* bool: always display */
packet_put_cstring(buf);
packet_put_cstring("");
} else {
packet_start(SSH_MSG_DEBUG);
packet_put_cstring(buf);
}
packet_send();
packet_write_wait();
}
/*
* Logs the error plus constructs and sends a disconnect packet, closes the
* connection, and exits. This function never returns. The error message
* should not contain a newline. The length of the formatted message must
* not exceed 1024 bytes.
*/
void
packet_disconnect(const char *fmt,...)
{
char buf[1024];
va_list args;
static int disconnecting = 0;
if (disconnecting) /* Guard against recursive invocations. */
fatal("packet_disconnect called recursively.");
disconnecting = 1;
/*
* Format the message. Note that the caller must make sure the
* message is of limited size.
*/
va_start(args, fmt);
vsnprintf(buf, sizeof(buf), fmt, args);
va_end(args);
/* Send the disconnect message to the other side, and wait for it to get sent. */
if (compat20) {
packet_start(SSH2_MSG_DISCONNECT);
packet_put_int(SSH2_DISCONNECT_PROTOCOL_ERROR);
packet_put_cstring(buf);
packet_put_cstring("");
} else {
packet_start(SSH_MSG_DISCONNECT);
packet_put_string(buf, strlen(buf));
}
packet_send();
packet_write_wait();
/* Stop listening for connections. */
channel_stop_listening();
/* Close the connection. */
packet_close();
/* Display the error locally and exit. */
log("Disconnecting: %.100s", buf);
fatal_cleanup();
}
/* Checks if there is any buffered output, and tries to write some of the output. */
void
packet_write_poll()
{
int len = buffer_len(&output);
if (len > 0) {
len = write(connection_out, buffer_ptr(&output), len);
if (len <= 0) {
if (errno == EAGAIN)
return;
else
fatal("Write failed: %.100s", strerror(errno));
}
buffer_consume(&output, len);
}
}
/*
* Calls packet_write_poll repeatedly until all pending output data has been
* written.
*/
void
packet_write_wait()
{
packet_write_poll();
while (packet_have_data_to_write()) {
fd_set set;
FD_ZERO(&set);
FD_SET(connection_out, &set);
select(connection_out + 1, NULL, &set, NULL, NULL);
packet_write_poll();
}
}
/* Returns true if there is buffered data to write to the connection. */
int
packet_have_data_to_write()
{
return buffer_len(&output) != 0;
}
/* Returns true if there is not too much data to write to the connection. */
int
packet_not_very_much_data_to_write()
{
if (interactive_mode)
return buffer_len(&output) < 16384;
else
return buffer_len(&output) < 128 * 1024;
}
/* Informs that the current session is interactive. Sets IP flags for that. */
void
packet_set_interactive(int interactive)
{
static int called = 0;
int lowdelay = IPTOS_LOWDELAY;
int throughput = IPTOS_THROUGHPUT;
int on = 1;
if (called)
return;
called = 1;
/* Record that we are in interactive mode. */
interactive_mode = interactive;
/* Only set socket options if using a socket. */
if (!packet_connection_is_on_socket())
return;
/*
* IPTOS_LOWDELAY and IPTOS_THROUGHPUT are IPv4 only
*/
if (interactive) {
/*
* Set IP options for an interactive connection. Use
* IPTOS_LOWDELAY and TCP_NODELAY.
*/
#if defined(IP_TOS) && !defined(IP_TOS_IS_BROKEN)
if (packet_connection_is_ipv4()) {
if (setsockopt(connection_in, IPPROTO_IP, IP_TOS,
(void *) &lowdelay, sizeof(lowdelay)) < 0)
error("setsockopt IPTOS_LOWDELAY: %.100s",
strerror(errno));
}
#endif
if (setsockopt(connection_in, IPPROTO_TCP, TCP_NODELAY, (void *) &on,
sizeof(on)) < 0)
error("setsockopt TCP_NODELAY: %.100s", strerror(errno));
} else if (packet_connection_is_ipv4()) {
/*
* Set IP options for a non-interactive connection. Use
* IPTOS_THROUGHPUT.
*/
#if defined(IP_TOS) && !defined(IP_TOS_IS_BROKEN)
if (setsockopt(connection_in, IPPROTO_IP, IP_TOS, (void *) &throughput,
sizeof(throughput)) < 0)
error("setsockopt IPTOS_THROUGHPUT: %.100s", strerror(errno));
#endif
}
}
/* Returns true if the current connection is interactive. */
int
packet_is_interactive()
{
return interactive_mode;
}
int
packet_set_maxsize(int s)
{
static int called = 0;
if (called) {
log("packet_set_maxsize: called twice: old %d new %d",
max_packet_size, s);
return -1;
}
if (s < 4 * 1024 || s > 1024 * 1024) {
log("packet_set_maxsize: bad size %d", s);
return -1;
}
log("packet_set_maxsize: setting to %d", s);
max_packet_size = s;
return s;
}