# uncomment if you run a non bourne compatible shell. Ie. csh
#SHELL = @SH@

AUTORECONF=autoreconf

prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
sbindir=@sbindir@
libexecdir=@libexecdir@
datadir=@datadir@
datarootdir=@datarootdir@
mandir=@mandir@
mansubdir=@mansubdir@
sysconfdir=@sysconfdir@
piddir=@piddir@
srcdir=@srcdir@
top_srcdir=@top_srcdir@

DESTDIR=
VPATH=@srcdir@
SSH_PROGRAM=@bindir@/ssh
ASKPASS_PROGRAM=$(libexecdir)/ssh-askpass
SFTP_SERVER=$(libexecdir)/sftp-server
SSH_KEYSIGN=$(libexecdir)/ssh-keysign
SSH_PKCS11_HELPER=$(libexecdir)/ssh-pkcs11-helper
PRIVSEP_PATH=@PRIVSEP_PATH@
SSH_PRIVSEP_USER=@SSH_PRIVSEP_USER@
STRIP_OPT=@STRIP_OPT@
TEST_SHELL=@TEST_SHELL@

PATHS= -DSSHDIR=\"$(sysconfdir)\" \
	-D_PATH_SSH_PROGRAM=\"$(SSH_PROGRAM)\" \
	-D_PATH_SSH_ASKPASS_DEFAULT=\"$(ASKPASS_PROGRAM)\" \
	-D_PATH_SFTP_SERVER=\"$(SFTP_SERVER)\" \
	-D_PATH_SSH_KEY_SIGN=\"$(SSH_KEYSIGN)\" \
	-D_PATH_SSH_PKCS11_HELPER=\"$(SSH_PKCS11_HELPER)\" \
	-D_PATH_SSH_PIDDIR=\"$(piddir)\" \
	-D_PATH_PRIVSEP_CHROOT_DIR=\"$(PRIVSEP_PATH)\"

CC=@CC@
LD=@LD@
CFLAGS=@CFLAGS@
CPPFLAGS=-I. -I$(srcdir) @CPPFLAGS@ $(PATHS) @DEFS@
LIBS=@LIBS@
K5LIBS=@K5LIBS@
GSSLIBS=@GSSLIBS@
SSHLIBS=@SSHLIBS@
SSHDLIBS=@SSHDLIBS@
LIBEDIT=@LIBEDIT@
AR=@AR@
AWK=@AWK@
RANLIB=@RANLIB@
INSTALL=@INSTALL@
SED=@SED@
ENT=@ENT@
XAUTH_PATH=@XAUTH_PATH@
LDFLAGS=-L. -Lopenbsd-compat/ @LDFLAGS@
EXEEXT=@EXEEXT@
MANFMT=@MANFMT@
MKDIR_P=@MKDIR_P@

TARGETS=ssh$(EXEEXT) sshd$(EXEEXT) ssh-add$(EXEEXT) ssh-keygen$(EXEEXT) ssh-keyscan${EXEEXT} ssh-keysign${EXEEXT} ssh-pkcs11-helper$(EXEEXT) ssh-agent$(EXEEXT) scp$(EXEEXT) sftp-server$(EXEEXT) sftp$(EXEEXT)

XMSS_OBJS=\
	ssh-xmss.o \
	sshkey-xmss.o \
	xmss_commons.o \
	xmss_fast.o \
	xmss_hash.o \
	xmss_hash_address.o \
	xmss_wots.o

LIBOPENSSH_OBJS=\
	ssh_api.o \
	ssherr.o \
	sshbuf.o \
	sshkey.o \
	sshbuf-getput-basic.o \
	sshbuf-misc.o \
	sshbuf-getput-crypto.o \
	krl.o \
	bitmap.o \
	${XMSS_OBJS}

LIBSSH_OBJS=${LIBOPENSSH_OBJS} \
	authfd.o authfile.o \
	canohost.o channels.o cipher.o cipher-aes.o cipher-aesctr.o \
	cipher-ctr.o cleanup.o \
	compat.o fatal.o hostfile.o \
	log.o match.o moduli.o nchan.o packet.o \
	readpass.o ttymodes.o xmalloc.o addrmatch.o \
	atomicio.o dispatch.o mac.o misc.o utf8.o \
	monitor_fdpass.o rijndael.o ssh-dss.o ssh-ecdsa.o ssh-rsa.o dh.o \
	msg.o progressmeter.o dns.o entropy.o gss-genr.o umac.o umac128.o \
	ssh-pkcs11.o smult_curve25519_ref.o \
	poly1305.o chacha.o cipher-chachapoly.o \
	ssh-ed25519.o digest-openssl.o digest-libc.o hmac.o \
	sc25519.o ge25519.o fe25519.o ed25519.o verify.o hash.o \
	kex.o kexdh.o kexgex.o kexecdh.o kexc25519.o \
	kexgexc.o kexgexs.o \
	sntrup4591761.o kexsntrup4591761x25519.o kexgen.o \
	platform-pledge.o platform-tracing.o platform-misc.o


SSHOBJS= ssh.o readconf.o clientloop.o sshtty.o \
	sshconnect.o sshconnect2.o mux.o

SSHDOBJS=sshd.o auth-rhosts.o auth-passwd.o \
	audit.o audit-bsm.o audit-linux.o platform.o \
	sshpty.o sshlogin.o servconf.o serverloop.o \
	auth.o auth2.o auth-options.o session.o \
	auth2-chall.o groupaccess.o \
	auth-bsdauth.o auth2-hostbased.o auth2-kbdint.o \
	auth2-none.o auth2-passwd.o auth2-pubkey.o \
	monitor.o monitor_wrap.o auth-krb5.o \
	auth2-gss.o gss-serv.o gss-serv-krb5.o \
	loginrec.o auth-pam.o auth-shadow.o auth-sia.o md5crypt.o \
	sftp-server.o sftp-common.o sftp-realpath.o \
	sandbox-null.o sandbox-rlimit.o sandbox-systrace.o sandbox-darwin.o \
	sandbox-seccomp-filter.o sandbox-capsicum.o sandbox-pledge.o \
	sandbox-solaris.o uidswap.o

MANPAGES	= moduli.5.out scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out ssh-keysign.8.out ssh-pkcs11-helper.8.out sshd_config.5.out ssh_config.5.out
MANPAGES_IN	= moduli.5 scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1 ssh-keysign.8 ssh-pkcs11-helper.8 sshd_config.5 ssh_config.5
MANTYPE		= @MANTYPE@

CONFIGFILES=sshd_config.out ssh_config.out moduli.out
CONFIGFILES_IN=sshd_config ssh_config moduli

PATHSUBS	= \
	-e 's|/etc/ssh/ssh_config|$(sysconfdir)/ssh_config|g' \
	-e 's|/etc/ssh/ssh_known_hosts|$(sysconfdir)/ssh_known_hosts|g' \
	-e 's|/etc/ssh/sshd_config|$(sysconfdir)/sshd_config|g' \
	-e 's|/usr/libexec|$(libexecdir)|g' \
	-e 's|/etc/shosts.equiv|$(sysconfdir)/shosts.equiv|g' \
	-e 's|/etc/ssh/ssh_host_key|$(sysconfdir)/ssh_host_key|g' \
	-e 's|/etc/ssh/ssh_host_ecdsa_key|$(sysconfdir)/ssh_host_ecdsa_key|g' \
	-e 's|/etc/ssh/ssh_host_dsa_key|$(sysconfdir)/ssh_host_dsa_key|g' \
	-e 's|/etc/ssh/ssh_host_rsa_key|$(sysconfdir)/ssh_host_rsa_key|g' \
	-e 's|/etc/ssh/ssh_host_ed25519_key|$(sysconfdir)/ssh_host_ed25519_key|g' \
	-e 's|/var/run/sshd.pid|$(piddir)/sshd.pid|g' \
	-e 's|/etc/moduli|$(sysconfdir)/moduli|g' \
	-e 's|/etc/ssh/moduli|$(sysconfdir)/moduli|g' \
	-e 's|/etc/ssh/sshrc|$(sysconfdir)/sshrc|g' \
	-e 's|/usr/X11R6/bin/xauth|$(XAUTH_PATH)|g' \
	-e 's|/var/empty|$(PRIVSEP_PATH)|g' \
	-e 's|/usr/bin:/bin:/usr/sbin:/sbin|@user_path@|g'

FIXPATHSCMD	= $(SED) $(PATHSUBS)
FIXALGORITHMSCMD= $(SHELL) $(srcdir)/fixalgorithms $(SED) \
		     @UNSUPPORTED_ALGORITHMS@

all: $(CONFIGFILES) $(MANPAGES) $(TARGETS)

$(LIBSSH_OBJS): Makefile.in config.h
$(SSHOBJS): Makefile.in config.h
$(SSHDOBJS): Makefile.in config.h

.c.o:
	$(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $@

LIBCOMPAT=openbsd-compat/libopenbsd-compat.a
$(LIBCOMPAT): always
	(cd openbsd-compat && $(MAKE))
always:

libssh.a: $(LIBSSH_OBJS)
	$(AR) rv $@ $(LIBSSH_OBJS)
	$(RANLIB) $@

ssh$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHOBJS)
	$(LD) -o $@ $(SSHOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(SSHLIBS) $(LIBS) $(GSSLIBS)

sshd$(EXEEXT): libssh.a	$(LIBCOMPAT) $(SSHDOBJS)
	$(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(SSHDLIBS) $(LIBS) $(GSSLIBS) $(K5LIBS)

scp$(EXEEXT): $(LIBCOMPAT) libssh.a scp.o progressmeter.o
	$(LD) -o $@ scp.o progressmeter.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o
	$(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-agent.o ssh-pkcs11-client.o
	$(LD) -o $@ ssh-agent.o ssh-pkcs11-client.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keygen.o sshsig.o
	$(LD) -o $@ ssh-keygen.o sshsig.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

ssh-keysign$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keysign.o readconf.o uidswap.o compat.o
	$(LD) -o $@ ssh-keysign.o readconf.o uidswap.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

ssh-pkcs11-helper$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-pkcs11-helper.o ssh-pkcs11.o
	$(LD) -o $@ ssh-pkcs11-helper.o ssh-pkcs11.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o
	$(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS)

sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o sftp-realpath.o sftp-server-main.o
	$(LD) -o $@ sftp-server.o sftp-common.o sftp-realpath.o sftp-server-main.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-common.o sftp-glob.o progressmeter.o
	$(LD) -o $@ progressmeter.o sftp.o sftp-client.o sftp-common.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(LIBEDIT)

# test driver for the loginrec code - not built by default
logintest: logintest.o $(LIBCOMPAT) libssh.a loginrec.o
	$(LD) -o $@ logintest.o $(LDFLAGS) loginrec.o -lopenbsd-compat -lssh $(LIBS)

$(MANPAGES): $(MANPAGES_IN)
	if test "$(MANTYPE)" = "cat"; then \
		manpage=$(srcdir)/`echo $@ | sed 's/\.[1-9]\.out$$/\.0/'`; \
	else \
		manpage=$(srcdir)/`echo $@ | sed 's/\.out$$//'`; \
	fi; \
	if test "$(MANTYPE)" = "man"; then \
		$(FIXPATHSCMD) $${manpage} | $(FIXALGORITHMSCMD) | \
		    $(AWK) -f $(srcdir)/mdoc2man.awk > $@; \
	else \
		$(FIXPATHSCMD) $${manpage} | $(FIXALGORITHMSCMD) > $@; \
	fi

$(CONFIGFILES): $(CONFIGFILES_IN)
	conffile=`echo $@ | sed 's/.out$$//'`; \
	$(FIXPATHSCMD) $(srcdir)/$${conffile} > $@

# fake rule to stop make trying to compile moduli.o into a binary "moduli.o"
moduli:
	echo

clean:	regressclean
	rm -f *.o *.a $(TARGETS) logintest config.cache config.log
	rm -f *.out core survey
	rm -f regress/check-perm$(EXEEXT)
	rm -f regress/mkdtemp$(EXEEXT)
	rm -f regress/unittests/test_helper/*.a
	rm -f regress/unittests/test_helper/*.o
	rm -f regress/unittests/sshbuf/*.o
	rm -f regress/unittests/sshbuf/test_sshbuf$(EXEEXT)
	rm -f regress/unittests/sshkey/*.o
	rm -f regress/unittests/sshkey/test_sshkey$(EXEEXT)
	rm -f regress/unittests/bitmap/*.o
	rm -f regress/unittests/bitmap/test_bitmap$(EXEEXT)
	rm -f regress/unittests/conversion/*.o
	rm -f regress/unittests/conversion/test_conversion$(EXEEXT)
	rm -f regress/unittests/hostkeys/*.o
	rm -f regress/unittests/hostkeys/test_hostkeys$(EXEEXT)
	rm -f regress/unittests/kex/*.o
	rm -f regress/unittests/kex/test_kex$(EXEEXT)
	rm -f regress/unittests/match/*.o
	rm -f regress/unittests/match/test_match$(EXEEXT)
	rm -f regress/unittests/utf8/*.o
	rm -f regress/unittests/utf8/test_utf8$(EXEEXT)
	rm -f regress/misc/kexfuzz/*.o
	rm -f regress/misc/kexfuzz/kexfuzz$(EXEEXT)
	(cd openbsd-compat && $(MAKE) clean)

distclean:	regressclean
	rm -f *.o *.a $(TARGETS) logintest config.cache config.log
	rm -f *.out core opensshd.init openssh.xml
	rm -f Makefile buildpkg.sh config.h config.status
	rm -f survey.sh openbsd-compat/regress/Makefile *~ 
	rm -rf autom4te.cache
	rm -f regress/check-perm
	rm -f regress/mkdtemp
	rm -f regress/unittests/test_helper/*.a
	rm -f regress/unittests/test_helper/*.o
	rm -f regress/unittests/sshbuf/*.o
	rm -f regress/unittests/sshbuf/test_sshbuf
	rm -f regress/unittests/sshkey/*.o
	rm -f regress/unittests/sshkey/test_sshkey
	rm -f regress/unittests/bitmap/*.o
	rm -f regress/unittests/bitmap/test_bitmap
	rm -f regress/unittests/conversion/*.o
	rm -f regress/unittests/conversion/test_conversion
	rm -f regress/unittests/hostkeys/*.o
	rm -f regress/unittests/hostkeys/test_hostkeys
	rm -f regress/unittests/kex/*.o
	rm -f regress/unittests/kex/test_kex
	rm -f regress/unittests/match/*.o
	rm -f regress/unittests/match/test_match
	rm -f regress/unittests/utf8/*.o
	rm -f regress/unittests/utf8/test_utf8
	rm -f regress/misc/kexfuzz/*.o
	rm -f regress/misc/kexfuzz/kexfuzz$(EXEEXT)
	(cd openbsd-compat && $(MAKE) distclean)
	if test -d pkg ; then \
		rm -fr pkg ; \
	fi

veryclean: distclean
	rm -f configure config.h.in *.0

cleandir: veryclean

mrproper: veryclean

realclean: veryclean

catman-do:
	@for f in $(MANPAGES_IN) ; do \
		base=`echo $$f | sed 's/\..*$$//'` ; \
		echo "$$f -> $$base.0" ; \
		$(MANFMT) $$f | cat -v | sed -e 's/.\^H//g' \
			>$$base.0 ; \
	done

depend: depend-rebuild
	rm -f .depend.bak

depend-rebuild:
	rm -f config.h
	touch config.h
	makedepend -w1000 -Y. -f .depend *.c 2>/dev/null
	rm -f config.h

depend-check: depend-rebuild
	cmp .depend .depend.bak || (echo .depend stale && exit 1)

distprep: catman-do depend-check
	$(AUTORECONF)
	-rm -rf autom4te.cache .depend.bak

install: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files install-sysconf host-key check-config
install-nokeys: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files install-sysconf
install-nosysconf: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files

check-config:
	-$(DESTDIR)$(sbindir)/sshd -t -f $(DESTDIR)$(sysconfdir)/sshd_config

install-files:
	$(MKDIR_P) $(DESTDIR)$(bindir)
	$(MKDIR_P) $(DESTDIR)$(sbindir)
	$(MKDIR_P) $(DESTDIR)$(mandir)/$(mansubdir)1
	$(MKDIR_P) $(DESTDIR)$(mandir)/$(mansubdir)5
	$(MKDIR_P) $(DESTDIR)$(mandir)/$(mansubdir)8
	$(MKDIR_P) $(DESTDIR)$(libexecdir)
	$(MKDIR_P) -m 0755 $(DESTDIR)$(PRIVSEP_PATH)
	$(INSTALL) -m 0755 $(STRIP_OPT) ssh$(EXEEXT) $(DESTDIR)$(bindir)/ssh$(EXEEXT)
	$(INSTALL) -m 0755 $(STRIP_OPT) scp$(EXEEXT) $(DESTDIR)$(bindir)/scp$(EXEEXT)
	$(INSTALL) -m 0755 $(STRIP_OPT) ssh-add$(EXEEXT) $(DESTDIR)$(bindir)/ssh-add$(EXEEXT)
	$(INSTALL) -m 0755 $(STRIP_OPT) ssh-agent$(EXEEXT) $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT)
	$(INSTALL) -m 0755 $(STRIP_OPT) ssh-keygen$(EXEEXT) $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT)
	$(INSTALL) -m 0755 $(STRIP_OPT) ssh-keyscan$(EXEEXT) $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
	$(INSTALL) -m 0755 $(STRIP_OPT) sshd$(EXEEXT) $(DESTDIR)$(sbindir)/sshd$(EXEEXT)
	$(INSTALL) -m 4711 $(STRIP_OPT) ssh-keysign$(EXEEXT) $(DESTDIR)$(SSH_KEYSIGN)$(EXEEXT)
	$(INSTALL) -m 0755 $(STRIP_OPT) ssh-pkcs11-helper$(EXEEXT) $(DESTDIR)$(SSH_PKCS11_HELPER)$(EXEEXT)
	$(INSTALL) -m 0755 $(STRIP_OPT) sftp$(EXEEXT) $(DESTDIR)$(bindir)/sftp$(EXEEXT)
	$(INSTALL) -m 0755 $(STRIP_OPT) sftp-server$(EXEEXT) $(DESTDIR)$(SFTP_SERVER)$(EXEEXT)
	$(INSTALL) -m 644 ssh.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
	$(INSTALL) -m 644 scp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
	$(INSTALL) -m 644 ssh-add.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
	$(INSTALL) -m 644 ssh-agent.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
	$(INSTALL) -m 644 ssh-keygen.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
	$(INSTALL) -m 644 ssh-keyscan.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
	$(INSTALL) -m 644 moduli.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/moduli.5
	$(INSTALL) -m 644 sshd_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/sshd_config.5
	$(INSTALL) -m 644 ssh_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/ssh_config.5
	$(INSTALL) -m 644 sshd.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
	$(INSTALL) -m 644 sftp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
	$(INSTALL) -m 644 sftp-server.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
	$(INSTALL) -m 644 ssh-keysign.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8
	$(INSTALL) -m 644 ssh-pkcs11-helper.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-pkcs11-helper.8

install-sysconf:
	$(MKDIR_P) $(DESTDIR)$(sysconfdir)
	@if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_config ]; then \
		$(INSTALL) -m 644 ssh_config.out $(DESTDIR)$(sysconfdir)/ssh_config; \
	else \
		echo "$(DESTDIR)$(sysconfdir)/ssh_config already exists, install will not overwrite"; \
	fi
	@if [ ! -f $(DESTDIR)$(sysconfdir)/sshd_config ]; then \
		$(INSTALL) -m 644 sshd_config.out $(DESTDIR)$(sysconfdir)/sshd_config; \
	else \
		echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \
	fi
	@if [ ! -f $(DESTDIR)$(sysconfdir)/moduli ]; then \
		if [ -f $(DESTDIR)$(sysconfdir)/primes ]; then \
			echo "moving $(DESTDIR)$(sysconfdir)/primes to $(DESTDIR)$(sysconfdir)/moduli"; \
			mv "$(DESTDIR)$(sysconfdir)/primes" "$(DESTDIR)$(sysconfdir)/moduli"; \
		else \
			$(INSTALL) -m 644 moduli.out $(DESTDIR)$(sysconfdir)/moduli; \
		fi ; \
	else \
		echo "$(DESTDIR)$(sysconfdir)/moduli already exists, install will not overwrite"; \
	fi

host-key: ssh-keygen$(EXEEXT)
	@if [ -z "$(DESTDIR)" ] ; then \
		./ssh-keygen -A; \
	fi

host-key-force: ssh-keygen$(EXEEXT) ssh$(EXEEXT)
	./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N ""
	./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N ""
	./ssh-keygen -t ed25519 -f $(DESTDIR)$(sysconfdir)/ssh_host_ed25519_key -N ""
	if ./ssh -Q key | grep ecdsa >/dev/null ; then \
		./ssh-keygen -t ecdsa -f $(DESTDIR)$(sysconfdir)/ssh_host_ecdsa_key -N ""; \
	fi

uninstallall:	uninstall
	-rm -f $(DESTDIR)$(sysconfdir)/ssh_config
	-rm -f $(DESTDIR)$(sysconfdir)/sshd_config
	-rmdir $(DESTDIR)$(sysconfdir)
	-rmdir $(DESTDIR)$(bindir)
	-rmdir $(DESTDIR)$(sbindir)
	-rmdir $(DESTDIR)$(mandir)/$(mansubdir)1
	-rmdir $(DESTDIR)$(mandir)/$(mansubdir)8
	-rmdir $(DESTDIR)$(mandir)
	-rmdir $(DESTDIR)$(libexecdir)

uninstall:
	-rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-add$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/sftp$(EXEEXT)
	-rm -f $(DESTDIR)$(sbindir)/sshd$(EXEEXT)
	-rm -r $(DESTDIR)$(SFTP_SERVER)$(EXEEXT)
	-rm -f $(DESTDIR)$(SSH_KEYSIGN)$(EXEEXT)
	-rm -f $(DESTDIR)$(SSH_PKCS11_HELPER)$(EXEEXT)
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-pkcs11-helper.8

regress-prep:
	$(MKDIR_P) `pwd`/regress/unittests/test_helper
	$(MKDIR_P) `pwd`/regress/unittests/sshbuf
	$(MKDIR_P) `pwd`/regress/unittests/sshkey
	$(MKDIR_P) `pwd`/regress/unittests/bitmap
	$(MKDIR_P) `pwd`/regress/unittests/conversion
	$(MKDIR_P) `pwd`/regress/unittests/hostkeys
	$(MKDIR_P) `pwd`/regress/unittests/kex
	$(MKDIR_P) `pwd`/regress/unittests/match
	$(MKDIR_P) `pwd`/regress/unittests/utf8
	$(MKDIR_P) `pwd`/regress/misc/kexfuzz
	[ -f `pwd`/regress/Makefile ] || \
	    ln -s `cd $(srcdir) && pwd`/regress/Makefile `pwd`/regress/Makefile

REGRESSLIBS=libssh.a $(LIBCOMPAT)

regress/modpipe$(EXEEXT): $(srcdir)/regress/modpipe.c $(REGRESSLIBS)
	$(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/regress/modpipe.c \
	$(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

regress/setuid-allowed$(EXEEXT): $(srcdir)/regress/setuid-allowed.c $(REGRESSLIBS)
	$(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/regress/setuid-allowed.c \
	$(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

regress/netcat$(EXEEXT): $(srcdir)/regress/netcat.c $(REGRESSLIBS)
	$(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/regress/netcat.c \
	$(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

regress/check-perm$(EXEEXT): $(srcdir)/regress/check-perm.c $(REGRESSLIBS)
	$(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/regress/check-perm.c \
	$(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

regress/mkdtemp$(EXEEXT): $(srcdir)/regress/mkdtemp.c $(REGRESSLIBS)
	$(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/regress/mkdtemp.c \
	$(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

UNITTESTS_TEST_HELPER_OBJS=\
	regress/unittests/test_helper/test_helper.o \
	regress/unittests/test_helper/fuzz.o

regress/unittests/test_helper/libtest_helper.a: ${UNITTESTS_TEST_HELPER_OBJS}
	$(AR) rv $@ $(UNITTESTS_TEST_HELPER_OBJS)
	$(RANLIB) $@

UNITTESTS_TEST_SSHBUF_OBJS=\
	regress/unittests/sshbuf/tests.o \
	regress/unittests/sshbuf/test_sshbuf.o \
	regress/unittests/sshbuf/test_sshbuf_getput_basic.o \
	regress/unittests/sshbuf/test_sshbuf_getput_crypto.o \
	regress/unittests/sshbuf/test_sshbuf_misc.o \
	regress/unittests/sshbuf/test_sshbuf_fuzz.o \
	regress/unittests/sshbuf/test_sshbuf_getput_fuzz.o \
	regress/unittests/sshbuf/test_sshbuf_fixed.o

regress/unittests/sshbuf/test_sshbuf$(EXEEXT): ${UNITTESTS_TEST_SSHBUF_OBJS} \
    regress/unittests/test_helper/libtest_helper.a libssh.a
	$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_SSHBUF_OBJS) \
	    regress/unittests/test_helper/libtest_helper.a \
	    -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

UNITTESTS_TEST_SSHKEY_OBJS=\
	regress/unittests/sshkey/test_fuzz.o \
	regress/unittests/sshkey/tests.o \
	regress/unittests/sshkey/common.o \
	regress/unittests/sshkey/test_file.o \
	regress/unittests/sshkey/test_sshkey.o

regress/unittests/sshkey/test_sshkey$(EXEEXT): ${UNITTESTS_TEST_SSHKEY_OBJS} \
    regress/unittests/test_helper/libtest_helper.a libssh.a
	$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_SSHKEY_OBJS) \
	    regress/unittests/test_helper/libtest_helper.a \
	    -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

UNITTESTS_TEST_BITMAP_OBJS=\
	regress/unittests/bitmap/tests.o

regress/unittests/bitmap/test_bitmap$(EXEEXT): ${UNITTESTS_TEST_BITMAP_OBJS} \
    regress/unittests/test_helper/libtest_helper.a libssh.a
	$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_BITMAP_OBJS) \
	    regress/unittests/test_helper/libtest_helper.a \
	    -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

UNITTESTS_TEST_CONVERSION_OBJS=\
	regress/unittests/conversion/tests.o

regress/unittests/conversion/test_conversion$(EXEEXT): \
    ${UNITTESTS_TEST_CONVERSION_OBJS} \
    regress/unittests/test_helper/libtest_helper.a libssh.a
	$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_CONVERSION_OBJS) \
	    regress/unittests/test_helper/libtest_helper.a \
	    -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

UNITTESTS_TEST_KEX_OBJS=\
	regress/unittests/kex/tests.o \
	regress/unittests/kex/test_kex.o

regress/unittests/kex/test_kex$(EXEEXT): ${UNITTESTS_TEST_KEX_OBJS} \
    regress/unittests/test_helper/libtest_helper.a libssh.a
	$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_KEX_OBJS) \
	    regress/unittests/test_helper/libtest_helper.a \
	    -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

UNITTESTS_TEST_HOSTKEYS_OBJS=\
	regress/unittests/hostkeys/tests.o \
	regress/unittests/hostkeys/test_iterate.o

regress/unittests/hostkeys/test_hostkeys$(EXEEXT): \
    ${UNITTESTS_TEST_HOSTKEYS_OBJS} \
    regress/unittests/test_helper/libtest_helper.a libssh.a
	$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_HOSTKEYS_OBJS) \
	    regress/unittests/test_helper/libtest_helper.a \
	    -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

UNITTESTS_TEST_MATCH_OBJS=\
	regress/unittests/match/tests.o

regress/unittests/match/test_match$(EXEEXT): \
    ${UNITTESTS_TEST_MATCH_OBJS} \
    regress/unittests/test_helper/libtest_helper.a libssh.a
	$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_MATCH_OBJS) \
	    regress/unittests/test_helper/libtest_helper.a \
	    -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

UNITTESTS_TEST_UTF8_OBJS=\
	regress/unittests/utf8/tests.o

regress/unittests/utf8/test_utf8$(EXEEXT): \
    ${UNITTESTS_TEST_UTF8_OBJS} \
    regress/unittests/test_helper/libtest_helper.a libssh.a
	$(LD) -o $@ $(LDFLAGS) $(UNITTESTS_TEST_UTF8_OBJS) \
	    regress/unittests/test_helper/libtest_helper.a \
	    -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

MISC_KEX_FUZZ_OBJS=\
	regress/misc/kexfuzz/kexfuzz.o

regress/misc/kexfuzz/kexfuzz$(EXEEXT): ${MISC_KEX_FUZZ_OBJS} libssh.a
	$(LD) -o $@ $(LDFLAGS) $(MISC_KEX_FUZZ_OBJS) \
	    -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)

regress-binaries: regress-prep $(LIBCOMPAT) \
	regress/modpipe$(EXEEXT) \
	regress/setuid-allowed$(EXEEXT) \
	regress/netcat$(EXEEXT) \
	regress/check-perm$(EXEEXT) \
	regress/mkdtemp$(EXEEXT)

regress-unit-binaries: regress-prep $(REGRESSLIBS) \
	regress/unittests/sshbuf/test_sshbuf$(EXEEXT) \
	regress/unittests/sshkey/test_sshkey$(EXEEXT) \
	regress/unittests/bitmap/test_bitmap$(EXEEXT) \
	regress/unittests/conversion/test_conversion$(EXEEXT) \
	regress/unittests/hostkeys/test_hostkeys$(EXEEXT) \
	regress/unittests/kex/test_kex$(EXEEXT) \
	regress/unittests/match/test_match$(EXEEXT) \
	regress/unittests/utf8/test_utf8$(EXEEXT) \
	regress/misc/kexfuzz/kexfuzz$(EXEEXT)

tests:	file-tests t-exec interop-tests unit
	echo all tests passed

unit: regress-unit-binaries
	BUILDDIR=`pwd`; \
	cd $(srcdir)/regress || exit $$?; \
	$(MAKE) \
		.OBJDIR="$${BUILDDIR}/regress" \
		.CURDIR="`pwd`" \
		$@ && echo $@ tests passed

interop-tests t-exec file-tests: regress-prep regress-binaries $(TARGETS)
	BUILDDIR=`pwd`; \
	TEST_SSH_SCP="$${BUILDDIR}/scp"; \
	TEST_SSH_SSH="$${BUILDDIR}/ssh"; \
	TEST_SSH_SSHD="$${BUILDDIR}/sshd"; \
	TEST_SSH_SSHAGENT="$${BUILDDIR}/ssh-agent"; \
	TEST_SSH_SSHADD="$${BUILDDIR}/ssh-add"; \
	TEST_SSH_SSHKEYGEN="$${BUILDDIR}/ssh-keygen"; \
	TEST_SSH_SSHPKCS11HELPER="$${BUILDDIR}/ssh-pkcs11-helper"; \
	TEST_SSH_SSHKEYSCAN="$${BUILDDIR}/ssh-keyscan"; \
	TEST_SSH_SFTP="$${BUILDDIR}/sftp"; \
	TEST_SSH_SFTPSERVER="$${BUILDDIR}/sftp-server"; \
	TEST_SSH_SSHPKCS11HELPER="$${BUILDDIR}/ssh-pkcs11-helper"; \
	TEST_SSH_PLINK="plink"; \
	TEST_SSH_PUTTYGEN="puttygen"; \
	TEST_SSH_CONCH="conch"; \
	TEST_SSH_IPV6="@TEST_SSH_IPV6@" ; \
	TEST_SSH_UTF8="@TEST_SSH_UTF8@" ; \
	TEST_SSH_ECC="@TEST_SSH_ECC@" ; \
	cd $(srcdir)/regress || exit $$?; \
	$(MAKE) \
		.OBJDIR="$${BUILDDIR}/regress" \
		.CURDIR="`pwd`" \
		BUILDDIR="$${BUILDDIR}" \
		OBJ="$${BUILDDIR}/regress/" \
		PATH="$${BUILDDIR}:$${PATH}" \
		TEST_ENV=MALLOC_OPTIONS="@TEST_MALLOC_OPTIONS@" \
		TEST_MALLOC_OPTIONS="@TEST_MALLOC_OPTIONS@" \
		TEST_SSH_SCP="$${TEST_SSH_SCP}" \
		TEST_SSH_SSH="$${TEST_SSH_SSH}" \
		TEST_SSH_SSHD="$${TEST_SSH_SSHD}" \
		TEST_SSH_SSHAGENT="$${TEST_SSH_SSHAGENT}" \
		TEST_SSH_SSHADD="$${TEST_SSH_SSHADD}" \
		TEST_SSH_SSHKEYGEN="$${TEST_SSH_SSHKEYGEN}" \
		TEST_SSH_SSHPKCS11HELPER="$${TEST_SSH_SSHPKCS11HELPER}" \
		TEST_SSH_SSHKEYSCAN="$${TEST_SSH_SSHKEYSCAN}" \
		TEST_SSH_SFTP="$${TEST_SSH_SFTP}" \
		TEST_SSH_SFTPSERVER="$${TEST_SSH_SFTPSERVER}" \
		TEST_SSH_PLINK="$${TEST_SSH_PLINK}" \
		TEST_SSH_PUTTYGEN="$${TEST_SSH_PUTTYGEN}" \
		TEST_SSH_CONCH="$${TEST_SSH_CONCH}" \
		TEST_SSH_IPV6="$${TEST_SSH_IPV6}" \
		TEST_SSH_UTF8="$${TEST_SSH_UTF8}" \
		TEST_SSH_ECC="$${TEST_SSH_ECC}" \
		TEST_SHELL="${TEST_SHELL}" \
		EXEEXT="$(EXEEXT)" \
		$@ && echo all $@ passed

compat-tests: $(LIBCOMPAT)
	(cd openbsd-compat/regress && $(MAKE))

regressclean:
	if [ -f regress/Makefile ] && [ -r regress/Makefile ]; then \
		(cd regress && $(MAKE) clean) \
	fi

survey: survey.sh ssh
	@$(SHELL) ./survey.sh > survey
	@echo 'The survey results have been placed in the file "survey" in the'
	@echo 'current directory.  Please review the file then send with'
	@echo '"make send-survey".'

send-survey:	survey
	mail portable-survey@mindrot.org <survey

package: $(CONFIGFILES) $(MANPAGES) $(TARGETS)
	if [ "@MAKE_PACKAGE_SUPPORTED@" = yes ]; then \
		sh buildpkg.sh; \
	fi

# @DEPEND@