| # $Id: Makefile.in,v 1.208 2002/05/13 04:12:05 djm Exp $ |
| |
| # uncomment if you run a non bourne compatable shell. Ie. csh |
| #SHELL = @SH@ |
| |
| AUTORECONF=autoreconf |
| |
| prefix=@prefix@ |
| exec_prefix=@exec_prefix@ |
| bindir=@bindir@ |
| sbindir=@sbindir@ |
| libexecdir=@libexecdir@ |
| datadir=@datadir@ |
| mandir=@mandir@ |
| mansubdir=@mansubdir@ |
| sysconfdir=@sysconfdir@ |
| piddir=@piddir@ |
| srcdir=@srcdir@ |
| top_srcdir=@top_srcdir@ |
| |
| DESTDIR= |
| VPATH=@srcdir@ |
| SSH_PROGRAM=@bindir@/ssh |
| ASKPASS_PROGRAM=$(libexecdir)/ssh-askpass |
| SFTP_SERVER=$(libexecdir)/sftp-server |
| PRIVSEP_PATH=@PRIVSEP_PATH@ |
| |
| PATHS= -DSSHDIR=\"$(sysconfdir)\" \ |
| -D_PATH_SSH_PROGRAM=\"$(SSH_PROGRAM)\" \ |
| -D_PATH_SSH_ASKPASS_DEFAULT=\"$(ASKPASS_PROGRAM)\" \ |
| -D_PATH_SFTP_SERVER=\"$(SFTP_SERVER)\" \ |
| -D_PATH_SSH_PIDDIR=\"$(piddir)\" \ |
| -D_PATH_PRIVSEP_CHROOT_DIR=\"$(PRIVSEP_PATH)\" \ |
| -DSSH_RAND_HELPER=\"$(libexecdir)/ssh-rand-helper\" |
| |
| CC=@CC@ |
| LD=@LD@ |
| CFLAGS=@CFLAGS@ |
| CPPFLAGS=-I. -I$(srcdir) @CPPFLAGS@ $(PATHS) @DEFS@ |
| LIBS=@LIBS@ |
| LIBPAM=@LIBPAM@ |
| LIBWRAP=@LIBWRAP@ |
| AR=@AR@ |
| RANLIB=@RANLIB@ |
| INSTALL=@INSTALL@ |
| PERL=@PERL@ |
| ENT=@ENT@ |
| XAUTH_PATH=@XAUTH_PATH@ |
| LDFLAGS=-L. -Lopenbsd-compat/ @LDFLAGS@ |
| EXEEXT=@EXEEXT@ |
| SSH_MODE= @SSHMODE@ |
| |
| INSTALL_SSH_PRNG_CMDS=@INSTALL_SSH_PRNG_CMDS@ |
| INSTALL_SSH_RAND_HELPER=@INSTALL_SSH_RAND_HELPER@ |
| |
| @NO_SFTP@SFTP_PROGS=sftp-server$(EXEEXT) sftp$(EXEEXT) |
| |
| TARGETS=ssh$(EXEEXT) sshd$(EXEEXT) ssh-add$(EXEEXT) ssh-keygen$(EXEEXT) ssh-keyscan${EXEEXT} ssh-agent$(EXEEXT) scp$(EXEEXT) ssh-rand-helper${EXEEXT} $(SFTP_PROGS) |
| |
| LIBSSH_OBJS=atomicio.o authfd.o authfile.o bufaux.o buffer.o canohost.o channels.o cipher.o compat.o compress.o crc32.o deattack.o dh.o dispatch.o fatal.o mac.o hostfile.o key.o kex.o kexdh.o kexgex.o log.o match.o misc.o mpaux.o nchan.o packet.o radix.o rijndael.o entropy.o readpass.o rsa.o scard.o scard-opensc.o ssh-dss.o ssh-rsa.o tildexpand.o ttymodes.o uidswap.o uuencode.o xmalloc.o monitor_wrap.o monitor_fdpass.o |
| |
| SSHOBJS= ssh.o sshconnect.o sshconnect1.o sshconnect2.o sshtty.o readconf.o clientloop.o |
| |
| SSHDOBJS= sshd.o auth.o auth1.o auth2.o auth-chall.o auth2-chall.o auth-rhosts.o auth-options.o auth-krb4.o auth-krb5.o auth-pam.o auth2-pam.o auth-passwd.o auth-rsa.o auth-rh-rsa.o auth-sia.o sshpty.o sshlogin.o loginrec.o servconf.o serverloop.o md5crypt.o session.o groupaccess.o auth-skey.o auth-bsdauth.o monitor_mm.o monitor.o |
| |
| MANPAGES = scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out ssh-rand-helper.8.out |
| MANPAGES_IN = scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1 ssh-rand-helper.8 |
| MANTYPE = @MANTYPE@ |
| |
| CONFIGFILES=sshd_config.out ssh_config.out moduli.out |
| CONFIGFILES_IN=sshd_config ssh_config moduli |
| |
| PATHSUBS = \ |
| -D/etc/ssh/ssh_prng_cmds=$(sysconfdir)/ssh_prng_cmds \ |
| -D/etc/ssh/ssh_config=$(sysconfdir)/ssh_config \ |
| -D/etc/ssh/ssh_known_hosts=$(sysconfdir)/ssh_known_hosts \ |
| -D/etc/ssh/sshd_config=$(sysconfdir)/sshd_config \ |
| -D/usr/libexec=$(libexecdir) \ |
| -D/etc/shosts.equiv=$(sysconfdir)/shosts.equiv \ |
| -D/etc/ssh/ssh_host_key=$(sysconfdir)/ssh_host_key \ |
| -D/etc/ssh/ssh_host_dsa_key=$(sysconfdir)/ssh_host_dsa_key \ |
| -D/etc/ssh/ssh_host_rsa_key=$(sysconfdir)/ssh_host_rsa_key \ |
| -D/var/run/sshd.pid=$(piddir)/sshd.pid \ |
| -D/etc/ssh/moduli=$(sysconfdir)/moduli \ |
| -D/etc/ssh/sshrc=$(sysconfdir)/sshrc \ |
| -D/usr/X11R6/bin/xauth=$(XAUTH_PATH) \ |
| -D/var/empty=$(PRIVSEP_PATH) \ |
| -D/usr/bin:/bin:/usr/sbin:/sbin=@user_path@ |
| |
| FIXPATHSCMD = $(PERL) $(srcdir)/fixpaths $(PATHSUBS) |
| |
| all: $(CONFIGFILES) $(MANPAGES) $(TARGETS) |
| |
| $(LIBSSH_OBJS): config.h |
| $(SSHOBJS): config.h |
| $(SSHDOBJS): config.h |
| |
| .c.o: |
| $(CC) $(CFLAGS) $(CPPFLAGS) -c $< |
| |
| LIBCOMPAT=openbsd-compat/libopenbsd-compat.a |
| $(LIBCOMPAT): always |
| (cd openbsd-compat && $(MAKE)) |
| always: |
| |
| libssh.a: $(LIBSSH_OBJS) |
| $(AR) rv $@ $(LIBSSH_OBJS) |
| $(RANLIB) $@ |
| |
| ssh$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHOBJS) |
| $(LD) -o $@ $(SSHOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| sshd$(EXEEXT): libssh.a $(LIBCOMPAT) $(SSHDOBJS) |
| $(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBWRAP) $(LIBPAM) $(LIBS) |
| |
| scp$(EXEEXT): $(LIBCOMPAT) libssh.a scp.o |
| $(LD) -o $@ scp.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o |
| $(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-agent.o |
| $(LD) -o $@ ssh-agent.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keygen.o |
| $(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o |
| $(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS) |
| |
| sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o |
| $(LD) -o $@ sftp-server.o sftp-common.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-int.o sftp-common.o sftp-glob.o |
| $(LD) -o $@ sftp.o sftp-client.o sftp-common.o sftp-int.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| ssh-rand-helper${EXEEXT}: $(LIBCOMPAT) libssh.a ssh-rand-helper.o |
| $(LD) -o $@ ssh-rand-helper.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| # test driver for the loginrec code - not built by default |
| logintest: logintest.o $(LIBCOMPAT) libssh.a loginrec.o |
| $(LD) -o $@ logintest.o $(LDFLAGS) loginrec.o -lopenbsd-compat -lssh $(LIBS) |
| |
| $(MANPAGES): $(MANPAGES_IN) |
| if test "$(MANTYPE)" = "cat"; then \ |
| manpage=$(srcdir)/`echo $@ | sed 's/\.[1-9]\.out$$/\.0/'`; \ |
| else \ |
| manpage=$(srcdir)/`echo $@ | sed 's/\.out$$//'`; \ |
| fi; \ |
| if test "$(MANTYPE)" = "man"; then \ |
| $(FIXPATHSCMD) $${manpage} | $(PERL) $(srcdir)/mdoc2man.pl > $@; \ |
| else \ |
| $(FIXPATHSCMD) $${manpage} > $@; \ |
| fi |
| |
| $(CONFIGFILES): $(CONFIGFILES_IN) |
| conffile=`echo $@ | sed 's/.out$$//'`; \ |
| $(FIXPATHSCMD) $(srcdir)/$${conffile} > $@ |
| |
| clean: |
| rm -f *.o *.a $(TARGETS) logintest config.cache config.log |
| rm -f *.out core |
| (cd openbsd-compat && $(MAKE) clean) |
| |
| distclean: |
| rm -f *.o *.a $(TARGETS) logintest config.cache config.log |
| rm -f *.out core |
| rm -f Makefile config.h config.status ssh_prng_cmds *~ |
| rm -rf autom4te.cache |
| (cd openbsd-compat && $(MAKE) distclean) |
| (cd scard && $(MAKE) distclean) |
| |
| veryclean: |
| rm -f configure config.h.in *.0 |
| rm -f *.o *.a $(TARGETS) logintest config.cache config.log |
| rm -f *.out core |
| rm -f Makefile config.h config.status ssh_prng_cmds *~ |
| (cd openbsd-compat && $(MAKE) distclean) |
| (cd scard && $(MAKE) distclean) |
| |
| mrproper: distclean |
| |
| catman-do: |
| @for f in $(MANPAGES_IN) ; do \ |
| base=`echo $$f | sed 's/\..*$$//'` ; \ |
| echo "$$f -> $$base.0" ; \ |
| nroff -mandoc $$f | cat -v | sed -e 's/.\^H//g' \ |
| >$$base.0 ; \ |
| done |
| |
| distprep: catman-do |
| $(AUTORECONF) |
| (cd scard && $(MAKE) -f Makefile.in distprep) |
| |
| install: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files host-key |
| install-nokeys: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files |
| |
| scard-install: |
| (cd scard && $(MAKE) DESTDIR=$(DESTDIR) install) |
| |
| install-files: scard-install |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(bindir) |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(sbindir) |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(mandir) |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(datadir) |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)1 |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)8 |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(libexecdir) |
| $(INSTALL) -m $(SSH_MODE) -s ssh $(DESTDIR)$(bindir)/ssh |
| $(INSTALL) -m 0755 -s scp $(DESTDIR)$(bindir)/scp |
| $(INSTALL) -m 0755 -s ssh-add $(DESTDIR)$(bindir)/ssh-add |
| $(INSTALL) -m 0755 -s ssh-agent $(DESTDIR)$(bindir)/ssh-agent |
| $(INSTALL) -m 0755 -s ssh-keygen $(DESTDIR)$(bindir)/ssh-keygen |
| $(INSTALL) -m 0755 -s ssh-keyscan $(DESTDIR)$(bindir)/ssh-keyscan |
| $(INSTALL) -m 0755 -s sshd $(DESTDIR)$(sbindir)/sshd |
| if test ! -z "$(INSTALL_SSH_RAND_HELPER)" ; then \ |
| $(INSTALL) -m 0755 -s ssh-rand-helper $(DESTDIR)$(libexecdir)/ssh-rand-helper ; \ |
| fi |
| @NO_SFTP@$(INSTALL) -m 0755 -s sftp $(DESTDIR)$(bindir)/sftp |
| @NO_SFTP@$(INSTALL) -m 0755 -s sftp-server $(DESTDIR)$(SFTP_SERVER) |
| $(INSTALL) -m 644 ssh.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1 |
| $(INSTALL) -m 644 scp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1 |
| $(INSTALL) -m 644 ssh-add.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1 |
| $(INSTALL) -m 644 ssh-agent.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1 |
| $(INSTALL) -m 644 ssh-keygen.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1 |
| $(INSTALL) -m 644 ssh-keyscan.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1 |
| $(INSTALL) -m 644 sshd.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8 |
| if [ ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \ |
| $(INSTALL) -m 644 ssh-rand-helper.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-rand-helper.8 ; \ |
| fi |
| @NO_SFTP@$(INSTALL) -m 644 sftp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1 |
| @NO_SFTP@$(INSTALL) -m 644 sftp-server.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8 |
| -rm -f $(DESTDIR)$(bindir)/slogin |
| ln -s ssh$(EXEEXT) $(DESTDIR)$(bindir)/slogin |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1 |
| ln -s ssh.1 $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1 |
| if [ ! -d $(DESTDIR)$(sysconfdir) ]; then \ |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(sysconfdir); \ |
| fi |
| if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_config ]; then \ |
| $(INSTALL) -m 644 ssh_config.out $(DESTDIR)$(sysconfdir)/ssh_config; \ |
| else \ |
| echo "$(DESTDIR)$(sysconfdir)/ssh_config already exists, install will not overwrite"; \ |
| fi |
| if [ ! -f $(DESTDIR)$(sysconfdir)/sshd_config ]; then \ |
| $(INSTALL) -m 644 sshd_config.out $(DESTDIR)$(sysconfdir)/sshd_config; \ |
| else \ |
| echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \ |
| fi |
| if [ -f ssh_prng_cmds -a ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \ |
| $(PERL) $(srcdir)/fixprogs ssh_prng_cmds $(ENT); \ |
| if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds ] ; then \ |
| $(INSTALL) -m 644 ssh_prng_cmds.out $(DESTDIR)$(sysconfdir)/ssh_prng_cmds; \ |
| else \ |
| echo "$(DESTDIR)$(sysconfdir)/ssh_prng_cmds already exists, install will not overwrite"; \ |
| fi ; \ |
| fi |
| if [ ! -f $(DESTDIR)$(sysconfdir)/moduli ]; then \ |
| if [ -f $(DESTDIR)$(sysconfdir)/primes ]; then \ |
| echo "moving $(DESTDIR)$(sysconfdir)/primes to $(DESTDIR)$(sysconfdir)/moduli"; \ |
| mv "$(DESTDIR)$(sysconfdir)/primes" "$(DESTDIR)$(sysconfdir)/moduli"; \ |
| else \ |
| $(INSTALL) -m 644 moduli.out $(DESTDIR)$(sysconfdir)/moduli; \ |
| fi ; \ |
| else \ |
| echo "$(DESTDIR)$(sysconfdir)/moduli already exists, install will not overwrite"; \ |
| fi |
| |
| host-key: ssh-keygen$(EXEEXT) |
| if [ -z "$(DESTDIR)" ] ; then \ |
| if [ -f "$(DESTDIR)$(sysconfdir)/ssh_host_key" ] ; then \ |
| echo "$(DESTDIR)$(sysconfdir)/ssh_host_key already exists, skipping." ; \ |
| else \ |
| ./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N "" ; \ |
| fi ; \ |
| if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key ] ; then \ |
| echo "$(DESTDIR)$(sysconfdir)/ssh_host_dsa_key already exists, skipping." ; \ |
| else \ |
| ./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N "" ; \ |
| fi ; \ |
| if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key ] ; then \ |
| echo "$(DESTDIR)$(sysconfdir)/ssh_host_rsa_key already exists, skipping." ; \ |
| else \ |
| ./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N "" ; \ |
| fi ; \ |
| fi ; |
| |
| host-key-force: ssh-keygen$(EXEEXT) |
| ./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N "" |
| ./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N "" |
| ./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N "" |
| |
| uninstallall: uninstall |
| -rm -f $(DESTDIR)$(sysconfdir)/ssh_config |
| -rm -f $(DESTDIR)$(sysconfdir)/sshd_config |
| -rm -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds |
| -rmdir $(DESTDIR)$(sysconfdir) |
| -rmdir $(DESTDIR)$(bindir) |
| -rmdir $(DESTDIR)$(sbindir) |
| -rmdir $(DESTDIR)$(mandir)/$(mansubdir)1 |
| -rmdir $(DESTDIR)$(mandir)/$(mansubdir)8 |
| -rmdir $(DESTDIR)$(mandir) |
| -rmdir $(DESTDIR)$(libexecdir) |
| |
| uninstall: |
| -rm -f $(DESTDIR)$(bindir)/slogin |
| -rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/ssh-add$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/sftp$(EXEEXT) |
| -rm -f $(DESTDIR)$(sbindir)/sshd$(EXEEXT) |
| -rm -r $(DESTDIR)$(SFTP_SERVER)$(EXEEXT) |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-rand-helper.8 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1 |