| 1. Prerequisites |
| ---------------- |
| |
| You will need working installations of Zlib and OpenSSL. |
| |
| Zlib: |
| http://www.gzip.org/zlib/ |
| |
| OpenSSL 0.9.6 or greater: |
| http://www.openssl.org/ |
| |
| (OpenSSL 0.9.5a is partially supported, but some ciphers (SSH protocol 1 |
| Blowfish) do not work correctly.) |
| |
| OpenSSH can utilise Pluggable Authentication Modules (PAM) if your system |
| supports it. PAM is standard on Redhat and Debian Linux, Solaris and |
| HP-UX 11. |
| |
| NB. If you operating system supports /dev/random, you should configure |
| OpenSSL to use it. OpenSSH relies on OpenSSL's direct support of |
| /dev/random. If you don't you will have to rely on ssh-rand-helper, which |
| is inferior to a good kernel-based solution. |
| |
| PAM: |
| http://www.kernel.org/pub/linux/libs/pam/ |
| |
| If you wish to build the GNOME passphrase requester, you will need the GNOME |
| libraries and headers. |
| |
| GNOME: |
| http://www.gnome.org/ |
| |
| Alternatively, Jim Knoble <jmknoble@jmknoble.cx> has written an excellent X11 |
| passphrase requester. This is maintained separately at: |
| |
| http://www.ntrnet.net/~jmknoble/software/x11-ssh-askpass/index.html |
| |
| PRNGD: |
| |
| If your system lacks Kernel based random collection, the use of Lutz |
| Jaenicke's PRNGd is recommended. |
| |
| http://www.aet.tu-cottbus.de/personen/jaenicke/postfix_tls/prngd.html |
| |
| EGD: |
| |
| The Entropy Gathering Daemon (EGD) is supported if you have a system which |
| lacks /dev/random and don't want to use OpenSSH's internal entropy collection. |
| |
| http://www.lothar.com/tech/crypto/ |
| |
| S/Key Libraries: |
| http://www.sparc.spb.su/solaris/skey/ |
| |
| If you wish to use --with-skey then you will need the above library |
| installed. No other current S/Key library is currently known to be |
| supported. |
| |
| 2. Building / Installation |
| -------------------------- |
| |
| To install OpenSSH with default options: |
| |
| ./configure |
| make |
| make install |
| |
| This will install the OpenSSH binaries in /usr/local/bin, configuration files |
| in /usr/local/etc, the server in /usr/local/sbin, etc. To specify a different |
| installation prefix, use the --prefix option to configure: |
| |
| ./configure --prefix=/opt |
| make |
| make install |
| |
| Will install OpenSSH in /opt/{bin,etc,lib,sbin}. You can also override |
| specific paths, for example: |
| |
| ./configure --prefix=/opt --sysconfdir=/etc/ssh |
| make |
| make install |
| |
| This will install the binaries in /opt/{bin,lib,sbin}, but will place the |
| configuration files in /etc/ssh. |
| |
| If you are using PAM, you may need to manually install a PAM control |
| file as "/etc/pam.d/sshd" (or wherever your system prefers to keep |
| them). Note that the service name used to start PAM is __progname, |
| which is the basename of the path of your sshd (e.g., the service name |
| for /usr/sbin/osshd will be osshd). If you have renamed your sshd |
| executable, your PAM configuration may need to be modified. |
| |
| A generic PAM configuration is included as "contrib/sshd.pam.generic", |
| you may need to edit it before using it on your system. If you are |
| using a recent version of Red Hat Linux, the config file in |
| contrib/redhat/sshd.pam should be more useful. Failure to install a |
| valid PAM file may result in an inability to use password |
| authentication. On HP-UX 11 and Solaris, the standard /etc/pam.conf |
| configuration will work with sshd (sshd will match the other service |
| name). |
| |
| There are a few other options to the configure script: |
| |
| --with-pam enables PAM support. |
| |
| --enable-gnome-askpass will build the GNOME passphrase dialog. You |
| need a working installation of GNOME, including the development |
| headers, for this to work. |
| |
| --with-prngd-socket=/some/file allows you to enable EGD or PRNGD |
| support and to specify a PRNGd socket. Use this if your Unix lacks |
| /dev/random and you don't want to use OpenSSH's builtin entropy |
| collection support. |
| |
| --with-prngd-port=portnum allows you to enable EGD or PRNGD support |
| and to specify a EGD localhost TCP port. Use this if your Unix lacks |
| /dev/random and you don't want to use OpenSSH's builtin entropy |
| collection support. |
| |
| --with-lastlog=FILE will specify the location of the lastlog file. |
| ./configure searches a few locations for lastlog, but may not find |
| it if lastlog is installed in a different place. |
| |
| --without-lastlog will disable lastlog support entirely. |
| |
| --with-osfsia, --without-osfsia will enable or disable OSF1's Security |
| Integration Architecture. The default for OSF1 machines is enable. |
| |
| --with-kerberos4=PATH will enable Kerberos IV support. You will need |
| to have the Kerberos libraries and header files installed for this |
| to work. Use the optional PATH argument to specify the root of your |
| Kerberos installation. |
| |
| --with-afs=PATH will enable AFS support. You will need to have the |
| Kerberos IV and the AFS libraries and header files installed for this |
| to work. Use the optional PATH argument to specify the root of your |
| AFS installation. AFS requires Kerberos support to be enabled. |
| |
| --with-skey=PATH will enable S/Key one time password support. You will |
| need the S/Key libraries and header files installed for this to work. |
| |
| --with-tcp-wrappers will enable TCP Wrappers (/etc/hosts.allow|deny) |
| support. You will need libwrap.a and tcpd.h installed. |
| |
| --with-md5-passwords will enable the use of MD5 passwords. Enable this |
| if your operating system uses MD5 passwords without using PAM. |
| |
| --with-utmpx enables utmpx support. utmpx support is automatic for |
| some platforms. |
| |
| --without-shadow disables shadow password support. |
| |
| --with-ipaddr-display forces the use of a numeric IP address in the |
| $DISPLAY environment variable. Some broken systems need this. |
| |
| --with-default-path=PATH allows you to specify a default $PATH for sessions |
| started by sshd. This replaces the standard path entirely. |
| |
| --with-pid-dir=PATH specifies the directory in which the ssh.pid file is |
| created. |
| |
| --with-xauth=PATH specifies the location of the xauth binary |
| |
| --with-ssl-dir=DIR allows you to specify where your OpenSSL libraries |
| are installed. |
| |
| --with-4in6 Check for IPv4 in IPv6 mapped addresses and convert them to |
| real (AF_INET) IPv4 addresses. Works around some quirks on Linux. |
| |
| --with-opensc=DIR |
| --with-sectok=DIR allows for OpenSC or sectok smartcard libraries to |
| be used with OpenSSH. See 'README.smartcard' for more details. |
| |
| If you need to pass special options to the compiler or linker, you |
| can specify these as environment variables before running ./configure. |
| For example: |
| |
| CFLAGS="-O -m486" LDFLAGS="-s" LIBS="-lrubbish" LD="/usr/foo/ld" ./configure |
| |
| 3. Configuration |
| ---------------- |
| |
| The runtime configuration files are installed by in ${prefix}/etc or |
| whatever you specified as your --sysconfdir (/usr/local/etc by default). |
| |
| The default configuration should be instantly usable, though you should |
| review it to ensure that it matches your security requirements. |
| |
| To generate a host key, run "make host-key". Alternately you can do so |
| manually using the following commands: |
| |
| ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N "" |
| ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N "" |
| ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N "" |
| |
| Replacing /etc/ssh with the correct path to the configuration directory. |
| (${prefix}/etc or whatever you specified with --sysconfdir during |
| configuration) |
| |
| If you have configured OpenSSH with EGD support, ensure that EGD is |
| running and has collected some Entropy. |
| |
| For more information on configuration, please refer to the manual pages |
| for sshd, ssh and ssh-agent. |
| |
| 4. Problems? |
| ------------ |
| |
| If you experience problems compiling, installing or running OpenSSH. |
| Please refer to the "reporting bugs" section of the webpage at |
| http://www.openssh.com/ |
| |
| |
| $Id: INSTALL,v 1.57 2003/09/19 06:30:14 djm Exp $ |