- (tim) [configure.ac Makefile.in] Add support for "make package" ok djm@
- (tim) [buildpkg.sh.in] New file. A more flexible version of
contrib/solaris/buildpkg.sh used for "make package".
diff --git a/buildpkg.sh.in b/buildpkg.sh.in
new file mode 100644
index 0000000..656754c
--- /dev/null
+++ b/buildpkg.sh.in
@@ -0,0 +1,550 @@
+#!/bin/sh
+#
+# Fake Root Solaris/SVR4/SVR5 Build System - Prototype
+#
+# The following code has been provide under Public Domain License. I really
+# don't care what you use it for. Just as long as you don't complain to me
+# nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org)
+#
+umask 022
+#
+# Options for building the package
+# You can create a openssh-config.local with your customized options
+#
+REMOVE_FAKE_ROOT_WHEN_DONE=yes
+#
+# uncommenting TEST_DIR and using
+# configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty
+# and
+# PKGNAME=tOpenSSH should allow testing a package without interfering
+# with a real OpenSSH package on a system. This is not needed on systems
+# that support the -R option to pkgadd.
+#TEST_DIR=/var/tmp # leave commented out for production build
+PKGNAME=OpenSSH
+SYSVINIT_NAME=opensshd
+MAKE=${MAKE:="make"}
+SSHDUID=67 # Default privsep uid
+SSHDGID=67 # Default privsep gid
+# uncomment these next three as needed
+#PERMIT_ROOT_LOGIN=no
+#X11_FORWARDING=yes
+#USR_LOCAL_IS_SYMLINK=yes
+# System V init run levels
+SYSVINITSTART=S98
+SYSVINITSTOPT=K30
+# We will source these if they exist
+POST_MAKE_INSTALL_FIXES=./pkg_post_make_install_fixes.sh
+POST_PROTOTYPE_EDITS=./pkg-post-prototype-edit.sh
+# We'll be one level deeper looking for these
+PKG_PREINSTALL_LOCAL=../pkg-preinstall.local
+PKG_POSTINSTALL_LOCAL=../pkg-postinstall.local
+PKG_PREREMOVE_LOCAL=../pkg-preremove.local
+PKG_POSTREMOVE_LOCAL=../pkg-postremove.local
+PKG_REQUEST_LOCAL=../pkg-request.local
+# end of sourced files
+#
+OPENSSHD_IN=@top_srcdir@/contrib/solaris/opensshd.in
+
+PATH_GROUPADD_PROG=@PATH_GROUPADD_PROG@
+PATH_USERADD_PROG=@PATH_USERADD_PROG@
+PATH_PASSWD_PROG=@PATH_PASSWD_PROG@
+#
+# list of system directories we do NOT want to change owner/group/perms
+# when installing our package
+SYSTEM_DIR="/etc \
+/etc/init.d \
+/etc/rcS.d \
+/etc/rc0.d \
+/etc/rc1.d \
+/etc/rc2.d \
+/etc/opt \
+/opt \
+/opt/bin \
+/usr \
+/usr/bin \
+/usr/lib \
+/usr/sbin \
+/usr/share \
+/usr/share/man \
+/usr/share/man/man1 \
+/usr/share/man/man8 \
+/usr/local \
+/usr/local/bin \
+/usr/local/etc \
+/usr/local/libexec \
+/usr/local/man \
+/usr/local/man/man1 \
+/usr/local/man/man8 \
+/usr/local/sbin \
+/usr/local/share \
+/var \
+/var/opt \
+/var/run \
+/var/tmp \
+/tmp"
+
+# We may need to build as root so we make sure PATH is set up
+# only set the path if it's not set already
+[ -d /opt/bin ] && {
+ echo $PATH | grep ":/opt/bin" > /dev/null 2>&1
+ [ $? -ne 0 ] && PATH=$PATH:/opt/bin
+}
+[ -d /usr/local/bin ] && {
+ echo $PATH | grep ":/usr/local/bin" > /dev/null 2>&1
+ [ $? -ne 0 ] && PATH=$PATH:/usr/local/bin
+}
+[ -d /usr/ccs/bin ] && {
+ echo $PATH | grep ":/usr/ccs/bin" > /dev/null 2>&1
+ [ $? -ne 0 ] && PATH=$PATH:/usr/ccs/bin
+}
+export PATH
+#
+
+[ -f Makefile ] || {
+ echo "Please run this script from your build directory"
+ exit 1
+}
+
+# we will look for openssh-config.local to override the above options
+[ -s ./openssh-config.local ] && . ./openssh-config.local
+
+START=`pwd`
+FAKE_ROOT=$START/pkg
+
+## Fill in some details, like prefix and sysconfdir
+for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir srcdir
+do
+ eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2`
+done
+
+
+## Collect value of privsep user
+for confvar in SSH_PRIVSEP_USER
+do
+ eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
+done
+
+## Set privsep defaults if not defined
+if [ -z "$SSH_PRIVSEP_USER" ]
+then
+ SSH_PRIVSEP_USER=sshd
+fi
+
+## Extract common info requires for the 'info' part of the package.
+VERSION=`./ssh -V 2>&1 | sed -e 's/,.*//'`
+
+ARCH=`uname -m`
+DEF_MSG="\n"
+OS_VER=`uname -v`
+SCRIPT_SHELL=/sbin/sh
+UNAME_S=`uname -s`
+case ${UNAME_S} in
+ SunOS) UNAME_S=Solaris
+ ARCH=`uname -p`
+ RCS_D=yes
+ DEF_MSG="(default: n)"
+ ;;
+ SCO_SV) UNAME_S=OpenServer
+ OS_VER=`uname -X | grep Release | sed -e 's/^Rel.*3.2v//'`
+ SCRIPT_SHELL=/bin/sh
+ RC1_D=no
+ DEF_MSG="(default: n)"
+ ;;
+esac
+
+case `basename $0` in
+ buildpkg.sh)
+## Start by faking root install
+echo "Faking root install..."
+[ -d $FAKE_ROOT ] && rm -fr $FAKE_ROOT
+mkdir $FAKE_ROOT
+${MAKE} install-nokeys DESTDIR=$FAKE_ROOT
+if [ $? -gt 0 ]
+then
+ echo "Fake root install failed, stopping."
+ exit 1
+fi
+
+## Setup our run level stuff while we are at it.
+mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d
+
+## setup our initscript correctly
+sed -e "s#%%configDir%%#${sysconfdir}#g" \
+ -e "s#%%openSSHDir%%#$prefix#g" \
+ -e "s#%%pidDir%%#${piddir}#g" \
+ ${OPENSSHD_IN} > $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+
+[ "${PERMIT_ROOT_LOGIN}" = no ] && \
+ perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
+ $FAKE_ROOT/${sysconfdir}/sshd_config
+[ "${X11_FORWARDING}" = yes ] && \
+ perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
+ $FAKE_ROOT/${sysconfdir}/sshd_config
+# fix PrintMotd
+perl -p -i -e "s/#PrintMotd yes/PrintMotd no/" \
+ $FAKE_ROOT/${sysconfdir}/sshd_config
+
+# We don't want to overwrite config files on multiple installs
+mv $FAKE_ROOT/${sysconfdir}/ssh_config $FAKE_ROOT/${sysconfdir}/ssh_config.default
+mv $FAKE_ROOT/${sysconfdir}/sshd_config $FAKE_ROOT/${sysconfdir}/sshd_config.default
+[ -f $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds ] && \
+mv $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds.default
+
+# local tweeks here
+[ -s "${POST_MAKE_INSTALL_FIXES}" ] && . ${POST_MAKE_INSTALL_FIXES}
+
+cd $FAKE_ROOT
+
+## Ok, this is outright wrong, but it will work. I'm tired of pkgmk
+## whining.
+for i in *; do
+ PROTO_ARGS="$PROTO_ARGS $i=/$i";
+done
+
+## Build info file
+echo "Building pkginfo file..."
+cat > pkginfo << _EOF
+PKG=$PKGNAME
+NAME="OpenSSH Portable for ${UNAME_S}"
+DESC="Secure Shell remote access utility; replaces telnet and rlogin/rsh."
+VENDOR="OpenSSH Portable Team - http://www.openssh.com/portable.html"
+ARCH=$ARCH
+VERSION=$VERSION
+CATEGORY="Security,application"
+BASEDIR=/
+CLASSES="none"
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+
+## Build empty depend file that may get updated by $POST_PROTOTYPE_EDITS
+echo "Building depend file..."
+touch depend
+
+## Build space file
+echo "Building space file..."
+cat > space << _EOF
+# extra space required by start/stop links added by installf in postinstall
+$TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1
+$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME} 0 1
+_EOF
+[ "$RC1_D" = no ] || \
+echo "$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1" >> space
+[ "$RCS_D" = yes ] && \
+echo "$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME} 0 1" >> space
+
+## Build preinstall file
+echo "Building preinstall file..."
+cat > preinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+_EOF
+
+# local preinstall changes here
+[ -s "${PKG_PREINSTALL_LOCAL}" ] && . ${PKG_PREINSTALL_LOCAL}
+
+cat >> preinstall << _EOF
+#
+[ "\${PRE_INS_STOP}" = "yes" ] && ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+exit 0
+_EOF
+
+## Build postinstall file
+echo "Building postinstall file..."
+cat > postinstall << _EOF
+#! ${SCRIPT_SHELL}
+#
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ] || \\
+ cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\
+ \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ] || \\
+ cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\
+ \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config
+[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default ] && {
+ [ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds ] || \\
+ cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default \\
+ \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds
+}
+
+# make rc?.d dirs only if we are doing a test install
+[ -n "${TEST_DIR}" ] && {
+ [ "$RCS_D" = yes ] && mkdir -p ${TEST_DIR}/etc/rcS.d
+ mkdir -p ${TEST_DIR}/etc/rc0.d
+ [ "$RC1_D" = no ] || mkdir -p ${TEST_DIR}/etc/rc1.d
+ mkdir -p ${TEST_DIR}/etc/rc2.d
+}
+
+if [ "\${USE_SYM_LINKS}" = yes ]
+then
+ [ "$RCS_D" = yes ] && \
+installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+ installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+ [ "$RC1_D" = no ] || \
+ installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+ installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
+else
+ [ "$RCS_D" = yes ] && \
+installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+ installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+ [ "$RC1_D" = no ] || \
+ installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/${SYSVINITSTOPT}${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+ installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/${SYSVINITSTART}${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
+fi
+
+# If piddir doesn't exist we add it. (Ie. --with-pid-dir=/var/opt/ssh)
+[ -d $piddir ] || installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR$piddir d 0755 root sys
+
+_EOF
+
+# local postinstall changes here
+[ -s "${PKG_POSTINSTALL_LOCAL}" ] && . ${PKG_POSTINSTALL_LOCAL}
+
+cat >> postinstall << _EOF
+installf -f ${PKGNAME}
+
+# Use chroot to handle PKG_INSTALL_ROOT
+if [ ! -z "\${PKG_INSTALL_ROOT}" ]
+then
+ chroot="chroot \${PKG_INSTALL_ROOT}"
+fi
+# If this is a test build, we will skip the groupadd/useradd/passwd commands
+if [ ! -z "${TEST_DIR}" ]
+then
+ chroot=echo
+fi
+
+if egrep '^[ \t]*UsePrivilegeSeparation[ \t]+no' \${PKG_INSTALL_ROOT}/$sysconfdir/sshd_config >/dev/null
+then
+ echo "UsePrivilegeSeparation disabled in config, not creating PrivSep user"
+ echo "or group."
+else
+ echo "UsePrivilegeSeparation enabled in config (or defaulting to on)."
+
+ # create group if required
+ if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
+ then
+ echo "PrivSep group $SSH_PRIVSEP_USER already exists."
+ else
+ # Use gid of 67 if possible
+ if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSHDGID'\$' >/dev/null
+ then
+ :
+ else
+ sshdgid="-g $SSHDGID"
+ fi
+ echo "Creating PrivSep group $SSH_PRIVSEP_USER."
+ \$chroot ${PATH_GROUPADD_PROG} \$sshdgid $SSH_PRIVSEP_USER
+ fi
+
+ # Create user if required
+ if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
+ then
+ echo "PrivSep user $SSH_PRIVSEP_USER already exists."
+ else
+ # Use uid of 67 if possible
+ if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSHDGID'\$' >/dev/null
+ then
+ :
+ else
+ sshduid="-u $SSHDUID"
+ fi
+ echo "Creating PrivSep user $SSH_PRIVSEP_USER."
+ \$chroot ${PATH_USERADD_PROG} -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER
+ \$chroot ${PATH_PASSWD_PROG} -l $SSH_PRIVSEP_USER
+ fi
+fi
+
+[ "\${POST_INS_START}" = "yes" ] && ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start
+exit 0
+_EOF
+
+## Build preremove file
+echo "Building preremove file..."
+cat > preremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
+_EOF
+
+# local preremove changes here
+[ -s "${PKG_PREREMOVE_LOCAL}" ] && . ${PKG_PREREMOVE_LOCAL}
+
+cat >> preremove << _EOF
+exit 0
+_EOF
+
+## Build postremove file
+echo "Building postremove file..."
+cat > postremove << _EOF
+#! ${SCRIPT_SHELL}
+#
+_EOF
+
+# local postremove changes here
+[ -s "${PKG_POSTREMOVE_LOCAL}" ] && . ${PKG_POSTREMOVE_LOCAL}
+
+cat >> postremove << _EOF
+exit 0
+_EOF
+
+## Build request file
+echo "Building request file..."
+cat > request << _EOF
+trap 'exit 3' 15
+
+_EOF
+
+[ -x /usr/bin/ckyorn ] || cat >> request << _EOF
+
+ckyorn() {
+# for some strange reason OpenServer has no ckyorn
+# We build a striped down version here
+
+DEFAULT=n
+PROMPT="Yes or No [yes,no,?,quit]"
+HELP_PROMPT=" Enter y or yes if your answer is yes; n or no if your answer is no."
+USAGE="usage: ckyorn [options]
+where options may include:
+ -d default
+ -h help
+ -p prompt
+"
+
+if [ \$# != 0 ]
+then
+ while getopts d:p:h: c
+ do
+ case \$c in
+ h) HELP_PROMPT="\$OPTARG" ;;
+ d) DEFAULT=\$OPTARG ;;
+ p) PROMPT=\$OPTARG ;;
+ \\?) echo "\$USAGE" 1>&2
+ exit 1 ;;
+ esac
+ done
+ shift \`expr \$OPTIND - 1\`
+fi
+
+while true
+do
+ echo "\${PROMPT}\\c " 1>&2
+ read key
+ [ -z "\$key" ] && key=\$DEFAULT
+ case \$key in
+ [n,N]|[n,N][o,O]|[y,Y]|[y,Y][e,E][s,S]) echo "\${key}\\c"
+ exit 0 ;;
+ \\?) echo \$HELP_PROMPT 1>&2 ;;
+ q|quit) echo "q\\c" 1>&2
+ exit 3 ;;
+ esac
+done
+
+}
+
+_EOF
+
+cat >> request << _EOF
+USE_SYM_LINKS=no
+PRE_INS_STOP=no
+POST_INS_START=no
+# Use symbolic links?
+ans=\`ckyorn -d n \
+-p "Do you want symbolic links for the start/stop scripts? ${DEF_MSG}"\` || exit \$?
+case \$ans in
+ [y,Y]*) USE_SYM_LINKS=yes ;;
+esac
+
+# determine if should restart the daemon
+if [ -s ${piddir}/sshd.pid -a -f ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} ]
+then
+ ans=\`ckyorn -d n \
+-p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
+ case \$ans in
+ [y,Y]*) PRE_INS_STOP=yes
+ POST_INS_START=yes
+ ;;
+ esac
+
+else
+
+# determine if we should start sshd
+ ans=\`ckyorn -d n \
+-p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
+ case \$ans in
+ [y,Y]*) POST_INS_START=yes ;;
+ esac
+fi
+
+# make parameters available to installation service,
+# and so to any other packaging scripts
+cat >\$1 <<!
+USE_SYM_LINKS='\$USE_SYM_LINKS'
+PRE_INS_STOP='\$PRE_INS_STOP'
+POST_INS_START='\$POST_INS_START'
+!
+
+_EOF
+
+# local request changes here
+[ -s "${PKG_REQUEST_LOCAL}" ] && . ${PKG_REQUEST_LOCAL}
+
+cat >> request << _EOF
+exit 0
+
+_EOF
+
+## Next Build our prototype
+echo "Building prototype file..."
+cat >mk-proto.awk << _EOF
+ BEGIN { print "i pkginfo"; print "i depend"; \\
+ print "i preinstall"; print "i postinstall"; \\
+ print "i preremove"; print "i postremove"; \\
+ print "i request"; print "i space"; \\
+ split("$SYSTEM_DIR",sys_files); }
+ {
+ for (dir in sys_files) { if ( \$3 != sys_files[dir] )
+ { if ( \$1 == "s" )
+ { \$5=""; \$6=""; }
+ else
+ { \$5="root"; \$6="sys"; }
+ }
+ else
+ { \$4="?"; \$5="?"; \$6="?"; break;}
+ } }
+ { print; }
+_EOF
+
+find . | egrep -v "prototype|pkginfo|mk-proto.awk" | sort | \
+ pkgproto $PROTO_ARGS | nawk -f mk-proto.awk > prototype
+
+# /usr/local is a symlink on some systems
+[ "${USR_LOCAL_IS_SYMLINK}" = yes ] && {
+ grep -v "^d none /usr/local ? ? ?$" prototype > prototype.new
+ mv prototype.new prototype
+}
+
+## Step back a directory and now build the package.
+cd ..
+# local prototype tweeks here
+[ -s "${POST_PROTOTYPE_EDITS}" ] && . ${POST_PROTOTYPE_EDITS}
+
+echo "Building package.."
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION-$UNAME_S-$ARCH.pkg
+ ;;
+
+ justpkg.sh)
+rm -fr ${FAKE_ROOT}/${PKGNAME}
+grep -v "^PSTAMP=" $FAKE_ROOT/pkginfo > $$tmp
+mv $$tmp $FAKE_ROOT/pkginfo
+cat >> $FAKE_ROOT/pkginfo << _EOF
+PSTAMP="${UNAME_S} ${OS_VER} ${ARCH} `date '+%d%b%Y %H:%M'`"
+_EOF
+pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
+echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$VERSION-$UNAME_S-$ARCH.pkg
+ ;;
+
+esac
+
+[ "${REMOVE_FAKE_ROOT_WHEN_DONE}" = yes ] && rm -rf $FAKE_ROOT
+