blob: b58250aae72cc95baf78382ce6adc76d176573d0 [file] [log] [blame]
# $Id: Makefile.in,v 1.197 2002/02/26 19:24:22 mouring Exp $
prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
sbindir=@sbindir@
libexecdir=@libexecdir@
datadir=@datadir@
mandir=@mandir@
mansubdir=@mansubdir@
sysconfdir=@sysconfdir@
piddir=@piddir@
srcdir=@srcdir@
top_srcdir=@top_srcdir@
DESTDIR=
VPATH=@srcdir@
SSH_PROGRAM=@bindir@/ssh
ASKPASS_PROGRAM=$(libexecdir)/ssh-askpass
SFTP_SERVER=$(libexecdir)/sftp-server
PATHS= -DSSHDIR=\"$(sysconfdir)\" \
-D_PATH_SSH_PROGRAM=\"$(SSH_PROGRAM)\" \
-D_PATH_SSH_ASKPASS_DEFAULT=\"$(ASKPASS_PROGRAM)\" \
-D_PATH_SFTP_SERVER=\"$(SFTP_SERVER)\" \
-D_PATH_SSH_PIDDIR=\"$(piddir)\" \
-DSSH_RAND_HELPER=\"$(libexecdir)/ssh-rand-helper\"
CC=@CC@
LD=@LD@
CFLAGS=@CFLAGS@
CPPFLAGS=-I. -I$(srcdir) @CPPFLAGS@ $(PATHS) @DEFS@
LIBS=@LIBS@
LIBPAM=@LIBPAM@
LIBWRAP=@LIBWRAP@
AR=@AR@
RANLIB=@RANLIB@
INSTALL=@INSTALL@
PERL=@PERL@
ENT=@ENT@
XAUTH_PATH=@XAUTH_PATH@
LDFLAGS=-L. -Lopenbsd-compat/ @LDFLAGS@
EXEEXT=@EXEEXT@
SSH_MODE= @SSHMODE@
INSTALL_SSH_PRNG_CMDS=@INSTALL_SSH_PRNG_CMDS@
INSTALL_SSH_RAND_HELPER=@INSTALL_SSH_RAND_HELPER@
@NO_SFTP@SFTP_PROGS=sftp-server$(EXEEXT) sftp$(EXEEXT)
TARGETS=ssh$(EXEEXT) sshd$(EXEEXT) ssh-add$(EXEEXT) ssh-keygen$(EXEEXT) ssh-keyscan${EXEEXT} ssh-agent$(EXEEXT) scp$(EXEEXT) ssh-rand-helper${EXEEXT} $(SFTP_PROGS)
LIBSSH_OBJS=atomicio.o authfd.o authfile.o bufaux.o buffer.o canohost.o channels.o cipher.o compat.o compress.o crc32.o deattack.o dh.o dispatch.o fatal.o mac.o hostfile.o key.o kex.o kexdh.o kexgex.o log.o match.o misc.o mpaux.o nchan.o packet.o radix.o rijndael.o entropy.o readpass.o rsa.o scard.o ssh-dss.o ssh-rsa.o tildexpand.o ttymodes.o uidswap.o uuencode.o xmalloc.o
SSHOBJS= ssh.o sshconnect.o sshconnect1.o sshconnect2.o sshtty.o readconf.o clientloop.o
SSHDOBJS= sshd.o auth.o auth1.o auth2.o auth-chall.o auth2-chall.o auth-rhosts.o auth-options.o auth-krb4.o auth-pam.o auth2-pam.o auth-passwd.o auth-rsa.o auth-rh-rsa.o auth-sia.o sshpty.o sshlogin.o loginrec.o servconf.o serverloop.o md5crypt.o session.o groupaccess.o auth-skey.o auth-bsdauth.o
MANPAGES = scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out
MANPAGES_IN = scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1
MANTYPE = @MANTYPE@
CONFIGFILES=sshd_config.out ssh_config.out moduli.out
CONFIGFILES_IN=sshd_config ssh_config moduli
PATHSUBS = \
-D/etc/ssh/ssh_config=$(sysconfdir)/ssh_config \
-D/etc/ssh/ssh_known_hosts=$(sysconfdir)/ssh_known_hosts \
-D/etc/ssh/sshd_config=$(sysconfdir)/sshd_config \
-D/usr/libexec=$(libexecdir) \
-D/etc/shosts.equiv=$(sysconfdir)/shosts.equiv \
-D/etc/ssh/ssh_host_key=$(sysconfdir)/ssh_host_key \
-D/etc/ssh/ssh_host_dsa_key=$(sysconfdir)/ssh_host_dsa_key \
-D/etc/ssh/ssh_host_rsa_key=$(sysconfdir)/ssh_host_rsa_key \
-D/var/run/sshd.pid=$(piddir)/sshd.pid \
-D/etc/ssh/moduli=$(sysconfdir)/moduli \
-D/etc/ssh/sshrc=$(sysconfdir)/sshrc \
-D/usr/X11R6/bin/xauth=$(XAUTH_PATH) \
-D/usr/bin:/bin:/usr/sbin:/sbin=@user_path@
FIXPATHSCMD = $(PERL) $(srcdir)/fixpaths $(PATHSUBS)
all: $(CONFIGFILES) $(MANPAGES) $(TARGETS)
$(LIBSSH_OBJS): config.h
$(SSHOBJS): config.h
$(SSHDOBJS): config.h
.c.o:
$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
LIBCOMPAT=openbsd-compat/libopenbsd-compat.a
$(LIBCOMPAT): always
(cd openbsd-compat && $(MAKE))
always:
libssh.a: $(LIBSSH_OBJS)
$(AR) rv $@ $(LIBSSH_OBJS)
$(RANLIB) $@
ssh$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHOBJS)
$(LD) -o $@ $(SSHOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
sshd$(EXEEXT): libssh.a $(LIBCOMPAT) $(SSHDOBJS)
$(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBWRAP) $(LIBPAM) $(LIBS)
scp$(EXEEXT): $(LIBCOMPAT) libssh.a scp.o
$(LD) -o $@ scp.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o
$(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-agent.o
$(LD) -o $@ ssh-agent.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keygen.o
$(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o
$(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS)
sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o
$(LD) -o $@ sftp-server.o sftp-common.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-int.o sftp-common.o sftp-glob.o
$(LD) -o $@ sftp.o sftp-client.o sftp-common.o sftp-int.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-rand-helper${EXEEXT}: $(LIBCOMPAT) libssh.a ssh-rand-helper.o
$(LD) -o $@ ssh-rand-helper.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
# test driver for the loginrec code - not built by default
logintest: logintest.o $(LIBCOMPAT) libssh.a loginrec.o
$(LD) -o $@ logintest.o $(LDFLAGS) loginrec.o -lopenbsd-compat -lssh $(LIBS)
$(MANPAGES): $(MANPAGES_IN)
if test "$(MANTYPE)" = "cat"; then \
manpage=$(srcdir)/`echo $@ | sed 's/\.[1-9]\.out$$/\.0/'`; \
else \
manpage=$(srcdir)/`echo $@ | sed 's/\.out$$//'`; \
fi; \
if test "$(MANTYPE)" = "man"; then \
$(FIXPATHSCMD) $${manpage} | $(PERL) $(srcdir)/mdoc2man.pl > $@; \
else \
$(FIXPATHSCMD) $${manpage} > $@; \
fi
$(CONFIGFILES): $(CONFIGFILES_IN)
conffile=`echo $@ | sed 's/.out$$//'`; \
$(FIXPATHSCMD) $(srcdir)/$${conffile} > $@
clean:
rm -f *.o *.a $(TARGETS) logintest config.cache config.log
rm -f *.out core
(cd openbsd-compat && $(MAKE) clean)
distclean:
rm -f *.o *.a $(TARGETS) logintest config.cache config.log
rm -f *.out core
rm -f Makefile config.h config.status ssh_prng_cmds *~
rm -rf autom4te.cache
(cd openbsd-compat && $(MAKE) distclean)
(cd scard && $(MAKE) distclean)
veryclean:
rm -f configure config.h.in *.0
rm -f *.o *.a $(TARGETS) logintest config.cache config.log
rm -f *.out core
rm -f Makefile config.h config.status ssh_prng_cmds *~
(cd openbsd-compat && $(MAKE) distclean)
(cd scard && $(MAKE) distclean)
mrproper: distclean
catman-do:
@for f in $(MANPAGES_IN) ; do \
base=`echo $$f | sed 's/\..*$$//'` ; \
echo "$$f -> $$base.0" ; \
nroff -mandoc $$f | cat -v | sed -e 's/.\^H//g' \
>$$base.0 ; \
done
distprep: catman-do
autoreconf
(cd scard && $(MAKE) -f Makefile.in distprep)
install: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files host-key
install-nokeys: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files
scard-install:
(cd scard && $(MAKE) DESTDIR=$(DESTDIR) install)
install-files: scard-install
$(srcdir)/mkinstalldirs $(DESTDIR)$(bindir)
$(srcdir)/mkinstalldirs $(DESTDIR)$(sbindir)
$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)
$(srcdir)/mkinstalldirs $(DESTDIR)$(datadir)
$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)1
$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)8
$(srcdir)/mkinstalldirs $(DESTDIR)$(libexecdir)
$(INSTALL) -m $(SSH_MODE) -s ssh $(DESTDIR)$(bindir)/ssh
$(INSTALL) -m 0755 -s scp $(DESTDIR)$(bindir)/scp
$(INSTALL) -m 0755 -s ssh-add $(DESTDIR)$(bindir)/ssh-add
$(INSTALL) -m 0755 -s ssh-agent $(DESTDIR)$(bindir)/ssh-agent
$(INSTALL) -m 0755 -s ssh-keygen $(DESTDIR)$(bindir)/ssh-keygen
$(INSTALL) -m 0755 -s ssh-keyscan $(DESTDIR)$(bindir)/ssh-keyscan
$(INSTALL) -m 0755 -s sshd $(DESTDIR)$(sbindir)/sshd
if test ! -z "$(INSTALL_SSH_RAND_HELPER)" ; then \
$(INSTALL) -m 0755 -s ssh-rand-helper $(DESTDIR)$(libexecdir)/ssh-rand-helper ; \
fi
@NO_SFTP@$(INSTALL) -m 0755 -s sftp $(DESTDIR)$(bindir)/sftp
@NO_SFTP@$(INSTALL) -m 0755 -s sftp-server $(DESTDIR)$(SFTP_SERVER)
$(INSTALL) -m 644 ssh.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
$(INSTALL) -m 644 scp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
$(INSTALL) -m 644 ssh-add.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
$(INSTALL) -m 644 ssh-agent.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
$(INSTALL) -m 644 ssh-keygen.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
$(INSTALL) -m 644 ssh-keyscan.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
$(INSTALL) -m 644 sshd.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
@NO_SFTP@$(INSTALL) -m 644 sftp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
@NO_SFTP@$(INSTALL) -m 644 sftp-server.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
-rm -f $(DESTDIR)$(bindir)/slogin
ln -s ssh$(EXEEXT) $(DESTDIR)$(bindir)/slogin
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
ln -s ssh.1 $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
if [ ! -d $(DESTDIR)$(sysconfdir) ]; then \
$(srcdir)/mkinstalldirs $(DESTDIR)$(sysconfdir); \
fi
if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_config ]; then \
$(INSTALL) -m 644 ssh_config.out $(DESTDIR)$(sysconfdir)/ssh_config; \
else \
echo "$(DESTDIR)$(sysconfdir)/ssh_config already exists, install will not overwrite"; \
fi
if [ ! -f $(DESTDIR)$(sysconfdir)/sshd_config ]; then \
$(INSTALL) -m 644 sshd_config.out $(DESTDIR)$(sysconfdir)/sshd_config; \
else \
echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \
fi
if [ -f ssh_prng_cmds -a ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \
$(PERL) $(srcdir)/fixprogs ssh_prng_cmds $(ENT); \
if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds ] ; then \
$(INSTALL) -m 644 ssh_prng_cmds.out $(DESTDIR)$(sysconfdir)/ssh_prng_cmds; \
else \
echo "$(DESTDIR)$(sysconfdir)/ssh_prng_cmds already exists, install will not overwrite"; \
fi ; \
fi
if [ ! -f $(DESTDIR)$(sysconfdir)/moduli ]; then \
if [ -f $(DESTDIR)$(sysconfdir)/primes ]; then \
echo "moving $(DESTDIR)$(sysconfdir)/primes to $(DESTDIR)$(sysconfdir)/moduli"; \
mv "$(DESTDIR)$(sysconfdir)/primes" "$(DESTDIR)$(sysconfdir)/moduli"; \
else \
$(INSTALL) -m 644 moduli.out $(DESTDIR)$(sysconfdir)/moduli; \
fi ; \
else \
echo "$(DESTDIR)$(sysconfdir)/moduli already exists, install will not overwrite"; \
fi
host-key: ssh-keygen$(EXEEXT)
if [ -z "$(DESTDIR)" ] ; then \
if [ -f "$(DESTDIR)$(sysconfdir)/ssh_host_key" ] ; then \
echo "$(DESTDIR)$(sysconfdir)/ssh_host_key already exists, skipping." ; \
else \
./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N "" ; \
fi ; \
if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key ] ; then \
echo "$(DESTDIR)$(sysconfdir)/ssh_host_dsa_key already exists, skipping." ; \
else \
./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N "" ; \
fi ; \
if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key ] ; then \
echo "$(DESTDIR)$(sysconfdir)/ssh_host_rsa_key already exists, skipping." ; \
else \
./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N "" ; \
fi ; \
fi ;
host-key-force: ssh-keygen$(EXEEXT)
./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N ""
./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N ""
./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N ""
uninstallall: uninstall
-rm -f $(DESTDIR)$(sysconfdir)/ssh_config
-rm -f $(DESTDIR)$(sysconfdir)/sshd_config
-rm -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds
-rmdir $(DESTDIR)$(sysconfdir)
-rmdir $(DESTDIR)$(bindir)
-rmdir $(DESTDIR)$(sbindir)
-rmdir $(DESTDIR)$(mandir)/$(mansubdir)1
-rmdir $(DESTDIR)$(mandir)/$(mansubdir)8
-rmdir $(DESTDIR)$(mandir)
-rmdir $(DESTDIR)$(libexecdir)
uninstall:
-rm -f $(DESTDIR)$(bindir)/slogin
-rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-add$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/sftp$(EXEEXT)
-rm -f $(DESTDIR)$(sbindir)/sshd$(EXEEXT)
-rm -r $(DESTDIR)$(SFTP_SERVER)$(EXEEXT)
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1