/*
 * Copyright (c) 2000 Markus Friedl.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "includes.h"
RCSID("$OpenBSD: auth.c,v 1.62 2006/02/20 17:19:53 stevesk Exp $");

#include <sys/types.h>
#include <sys/stat.h>

#ifdef HAVE_PATHS_H
# include <paths.h>
#endif
#ifdef HAVE_LOGIN_H
#include <login.h>
#endif
#ifdef USE_SHADOW
#include <shadow.h>
#endif

#ifdef HAVE_LIBGEN_H
#include <libgen.h>
#endif

#include "xmalloc.h"
#include "match.h"
#include "groupaccess.h"
#include "log.h"
#include "servconf.h"
#include "auth.h"
#include "auth-options.h"
#include "canohost.h"
#include "buffer.h"
#include "bufaux.h"
#include "uidswap.h"
#include "misc.h"
#include "bufaux.h"
#include "packet.h"
#include "loginrec.h"
#include "monitor_wrap.h"

/* import */
extern ServerOptions options;
extern Buffer loginmsg;

/* Debugging messages */
Buffer auth_debug;
int auth_debug_init;

/*
 * Check if the user is allowed to log in via ssh. If user is listed
 * in DenyUsers or one of user's groups is listed in DenyGroups, false
 * will be returned. If AllowUsers isn't empty and user isn't listed
 * there, or if AllowGroups isn't empty and one of user's groups isn't
 * listed there, false will be returned.
 * If the user's shell is not executable, false will be returned.
 * Otherwise true is returned.
 */
int
allowed_user(struct passwd * pw)
{
	struct stat st;
	const char *hostname = NULL, *ipaddr = NULL, *passwd = NULL;
	char *shell;
	u_int i;
#ifdef USE_SHADOW
	struct spwd *spw = NULL;
#endif

	/* Shouldn't be called if pw is NULL, but better safe than sorry... */
	if (!pw || !pw->pw_name)
		return 0;

#ifdef USE_SHADOW
	if (!options.use_pam)
		spw = getspnam(pw->pw_name);
#ifdef HAS_SHADOW_EXPIRE
	if (!options.use_pam && spw != NULL && auth_shadow_acctexpired(spw))
		return 0;
#endif /* HAS_SHADOW_EXPIRE */
#endif /* USE_SHADOW */

	/* grab passwd field for locked account check */
#ifdef USE_SHADOW
	if (spw != NULL)
#if defined(HAVE_LIBIAF)  &&  !defined(BROKEN_LIBIAF)
		passwd = get_iaf_password(pw);
#else
		passwd = spw->sp_pwdp;
#endif /* HAVE_LIBIAF  && !BROKEN_LIBIAF */
#else
	passwd = pw->pw_passwd;
#endif

	/* check for locked account */
	if (!options.use_pam && passwd && *passwd) {
		int locked = 0;

#ifdef LOCKED_PASSWD_STRING
		if (strcmp(passwd, LOCKED_PASSWD_STRING) == 0)
			 locked = 1;
#endif
#ifdef LOCKED_PASSWD_PREFIX
		if (strncmp(passwd, LOCKED_PASSWD_PREFIX,
		    strlen(LOCKED_PASSWD_PREFIX)) == 0)
			 locked = 1;
#endif
#ifdef LOCKED_PASSWD_SUBSTR
		if (strstr(passwd, LOCKED_PASSWD_SUBSTR))
			locked = 1;
#endif
#if defined(HAVE_LIBIAF)  &&  !defined(BROKEN_LIBIAF)
		free(passwd);
#endif /* HAVE_LIBIAF  && !BROKEN_LIBIAF */
		if (locked) {
			logit("User %.100s not allowed because account is locked",
			    pw->pw_name);
			return 0;
		}
	}

	/*
	 * Get the shell from the password data.  An empty shell field is
	 * legal, and means /bin/sh.
	 */
	shell = (pw->pw_shell[0] == '\0') ? _PATH_BSHELL : pw->pw_shell;

	/* deny if shell does not exists or is not executable */
	if (stat(shell, &st) != 0) {
		logit("User %.100s not allowed because shell %.100s does not exist",
		    pw->pw_name, shell);
		return 0;
	}
	if (S_ISREG(st.st_mode) == 0 ||
	    (st.st_mode & (S_IXOTH|S_IXUSR|S_IXGRP)) == 0) {
		logit("User %.100s not allowed because shell %.100s is not executable",
		    pw->pw_name, shell);
		return 0;
	}

	if (options.num_deny_users > 0 || options.num_allow_users > 0 ||
	    options.num_deny_groups > 0 || options.num_allow_groups > 0) {
		hostname = get_canonical_hostname(options.use_dns);
		ipaddr = get_remote_ipaddr();
	}

	/* Return false if user is listed in DenyUsers */
	if (options.num_deny_users > 0) {
		for (i = 0; i < options.num_deny_users; i++)
			if (match_user(pw->pw_name, hostname, ipaddr,
			    options.deny_users[i])) {
				logit("User %.100s from %.100s not allowed "
				    "because listed in DenyUsers",
				    pw->pw_name, hostname);
				return 0;
			}
	}
	/* Return false if AllowUsers isn't empty and user isn't listed there */
	if (options.num_allow_users > 0) {
		for (i = 0; i < options.num_allow_users; i++)
			if (match_user(pw->pw_name, hostname, ipaddr,
			    options.allow_users[i]))
				break;
		/* i < options.num_allow_users iff we break for loop */
		if (i >= options.num_allow_users) {
			logit("User %.100s from %.100s not allowed because "
			    "not listed in AllowUsers", pw->pw_name, hostname);
			return 0;
		}
	}
	if (options.num_deny_groups > 0 || options.num_allow_groups > 0) {
		/* Get the user's group access list (primary and supplementary) */
		if (ga_init(pw->pw_name, pw->pw_gid) == 0) {
			logit("User %.100s from %.100s not allowed because "
			    "not in any group", pw->pw_name, hostname);
			return 0;
		}

		/* Return false if one of user's groups is listed in DenyGroups */
		if (options.num_deny_groups > 0)
			if (ga_match(options.deny_groups,
			    options.num_deny_groups)) {
				ga_free();
				logit("User %.100s from %.100s not allowed "
				    "because a group is listed in DenyGroups",
				    pw->pw_name, hostname);
				return 0;
			}
		/*
		 * Return false if AllowGroups isn't empty and one of user's groups
		 * isn't listed there
		 */
		if (options.num_allow_groups > 0)
			if (!ga_match(options.allow_groups,
			    options.num_allow_groups)) {
				ga_free();
				logit("User %.100s from %.100s not allowed "
				    "because none of user's groups are listed "
				    "in AllowGroups", pw->pw_name, hostname);
				return 0;
			}
		ga_free();
	}

#ifdef CUSTOM_SYS_AUTH_ALLOWED_USER
	if (!sys_auth_allowed_user(pw, &loginmsg))
		return 0;
#endif

	/* We found no reason not to let this user try to log on... */
	return 1;
}

void
auth_log(Authctxt *authctxt, int authenticated, char *method, char *info)
{
	void (*authlog) (const char *fmt,...) = verbose;
	char *authmsg;

	/* Raise logging level */
	if (authenticated == 1 ||
	    !authctxt->valid ||
	    authctxt->failures >= options.max_authtries / 2 ||
	    strcmp(method, "password") == 0)
		authlog = logit;

	if (authctxt->postponed)
		authmsg = "Postponed";
	else
		authmsg = authenticated ? "Accepted" : "Failed";

	authlog("%s %s for %s%.100s from %.200s port %d%s",
	    authmsg,
	    method,
	    authctxt->valid ? "" : "invalid user ",
	    authctxt->user,
	    get_remote_ipaddr(),
	    get_remote_port(),
	    info);

#ifdef CUSTOM_FAILED_LOGIN
	if (authenticated == 0 && !authctxt->postponed &&
	    (strcmp(method, "password") == 0 ||
	    strncmp(method, "keyboard-interactive", 20) == 0 ||
	    strcmp(method, "challenge-response") == 0))
		record_failed_login(authctxt->user,
		    get_canonical_hostname(options.use_dns), "ssh");
#endif
#ifdef SSH_AUDIT_EVENTS
	if (authenticated == 0 && !authctxt->postponed) {
		ssh_audit_event_t event;

		debug3("audit failed auth attempt, method %s euid %d",
		    method, (int)geteuid());
		/*
		 * Because the auth loop is used in both monitor and slave,
		 * we must be careful to send each event only once and with
		 * enough privs to write the event.
		 */
		event = audit_classify_auth(method);
		switch(event) {
		case SSH_AUTH_FAIL_NONE:
		case SSH_AUTH_FAIL_PASSWD:
		case SSH_AUTH_FAIL_KBDINT:
			if (geteuid() == 0)
				audit_event(event);
			break;
		case SSH_AUTH_FAIL_PUBKEY:
		case SSH_AUTH_FAIL_HOSTBASED:
		case SSH_AUTH_FAIL_GSSAPI:
			/*
			 * This is required to handle the case where privsep
			 * is enabled but it's root logging in, since
			 * use_privsep won't be cleared until after a
			 * successful login.
			 */
			if (geteuid() == 0)
				audit_event(event);
			else
				PRIVSEP(audit_event(event));
			break;
		default:
			error("unknown authentication audit event %d", event);
		}
	}
#endif
}

/*
 * Check whether root logins are disallowed.
 */
int
auth_root_allowed(char *method)
{
	switch (options.permit_root_login) {
	case PERMIT_YES:
		return 1;
		break;
	case PERMIT_NO_PASSWD:
		if (strcmp(method, "password") != 0)
			return 1;
		break;
	case PERMIT_FORCED_ONLY:
		if (forced_command) {
			logit("Root login accepted for forced command.");
			return 1;
		}
		break;
	}
	logit("ROOT LOGIN REFUSED FROM %.200s", get_remote_ipaddr());
	return 0;
}


/*
 * Given a template and a passwd structure, build a filename
 * by substituting % tokenised options. Currently, %% becomes '%',
 * %h becomes the home directory and %u the username.
 *
 * This returns a buffer allocated by xmalloc.
 */
static char *
expand_authorized_keys(const char *filename, struct passwd *pw)
{
	char *file, *ret;

	file = percent_expand(filename, "h", pw->pw_dir,
	    "u", pw->pw_name, (char *)NULL);

	/*
	 * Ensure that filename starts anchored. If not, be backward
	 * compatible and prepend the '%h/'
	 */
	if (*file == '/')
		return (file);

	ret = xmalloc(MAXPATHLEN);
	if (strlcpy(ret, pw->pw_dir, MAXPATHLEN) >= MAXPATHLEN ||
	    strlcat(ret, "/", MAXPATHLEN) >= MAXPATHLEN ||
	    strlcat(ret, file, MAXPATHLEN) >= MAXPATHLEN)
		fatal("expand_authorized_keys: path too long");

	xfree(file);
	return (ret);
}

char *
authorized_keys_file(struct passwd *pw)
{
	return expand_authorized_keys(options.authorized_keys_file, pw);
}

char *
authorized_keys_file2(struct passwd *pw)
{
	return expand_authorized_keys(options.authorized_keys_file2, pw);
}

/* return ok if key exists in sysfile or userfile */
HostStatus
check_key_in_hostfiles(struct passwd *pw, Key *key, const char *host,
    const char *sysfile, const char *userfile)
{
	Key *found;
	char *user_hostfile;
	struct stat st;
	HostStatus host_status;

	/* Check if we know the host and its host key. */
	found = key_new(key->type);
	host_status = check_host_in_hostfile(sysfile, host, key, found, NULL);

	if (host_status != HOST_OK && userfile != NULL) {
		user_hostfile = tilde_expand_filename(userfile, pw->pw_uid);
		if (options.strict_modes &&
		    (stat(user_hostfile, &st) == 0) &&
		    ((st.st_uid != 0 && st.st_uid != pw->pw_uid) ||
		    (st.st_mode & 022) != 0)) {
			logit("Authentication refused for %.100s: "
			    "bad owner or modes for %.200s",
			    pw->pw_name, user_hostfile);
		} else {
			temporarily_use_uid(pw);
			host_status = check_host_in_hostfile(user_hostfile,
			    host, key, found, NULL);
			restore_uid();
		}
		xfree(user_hostfile);
	}
	key_free(found);

	debug2("check_key_in_hostfiles: key %s for %s", host_status == HOST_OK ?
	    "ok" : "not found", host);
	return host_status;
}


/*
 * Check a given file for security. This is defined as all components
 * of the path to the file must be owned by either the owner of
 * of the file or root and no directories must be group or world writable.
 *
 * XXX Should any specific check be done for sym links ?
 *
 * Takes an open file descriptor, the file name, a uid and and
 * error buffer plus max size as arguments.
 *
 * Returns 0 on success and -1 on failure
 */
int
secure_filename(FILE *f, const char *file, struct passwd *pw,
    char *err, size_t errlen)
{
	uid_t uid = pw->pw_uid;
	char buf[MAXPATHLEN], homedir[MAXPATHLEN];
	char *cp;
	int comparehome = 0;
	struct stat st;

	if (realpath(file, buf) == NULL) {
		snprintf(err, errlen, "realpath %s failed: %s", file,
		    strerror(errno));
		return -1;
	}
	if (realpath(pw->pw_dir, homedir) != NULL)
		comparehome = 1;

	/* check the open file to avoid races */
	if (fstat(fileno(f), &st) < 0 ||
	    (st.st_uid != 0 && st.st_uid != uid) ||
	    (st.st_mode & 022) != 0) {
		snprintf(err, errlen, "bad ownership or modes for file %s",
		    buf);
		return -1;
	}

	/* for each component of the canonical path, walking upwards */
	for (;;) {
		if ((cp = dirname(buf)) == NULL) {
			snprintf(err, errlen, "dirname() failed");
			return -1;
		}
		strlcpy(buf, cp, sizeof(buf));

		debug3("secure_filename: checking '%s'", buf);
		if (stat(buf, &st) < 0 ||
		    (st.st_uid != 0 && st.st_uid != uid) ||
		    (st.st_mode & 022) != 0) {
			snprintf(err, errlen,
			    "bad ownership or modes for directory %s", buf);
			return -1;
		}

		/* If are passed the homedir then we can stop */
		if (comparehome && strcmp(homedir, buf) == 0) {
			debug3("secure_filename: terminating check at '%s'",
			    buf);
			break;
		}
		/*
		 * dirname should always complete with a "/" path,
		 * but we can be paranoid and check for "." too
		 */
		if ((strcmp("/", buf) == 0) || (strcmp(".", buf) == 0))
			break;
	}
	return 0;
}

struct passwd *
getpwnamallow(const char *user)
{
#ifdef HAVE_LOGIN_CAP
	extern login_cap_t *lc;
#ifdef BSD_AUTH
	auth_session_t *as;
#endif
#endif
	struct passwd *pw;

	pw = getpwnam(user);
	if (pw == NULL) {
		logit("Invalid user %.100s from %.100s",
		    user, get_remote_ipaddr());
#ifdef CUSTOM_FAILED_LOGIN
		record_failed_login(user,
		    get_canonical_hostname(options.use_dns), "ssh");
#endif
#ifdef SSH_AUDIT_EVENTS
		audit_event(SSH_INVALID_USER);
#endif /* SSH_AUDIT_EVENTS */
		return (NULL);
	}
	if (!allowed_user(pw))
		return (NULL);
#ifdef HAVE_LOGIN_CAP
	if ((lc = login_getclass(pw->pw_class)) == NULL) {
		debug("unable to get login class: %s", user);
		return (NULL);
	}
#ifdef BSD_AUTH
	if ((as = auth_open()) == NULL || auth_setpwd(as, pw) != 0 ||
	    auth_approval(as, lc, pw->pw_name, "ssh") <= 0) {
		debug("Approval failure for %s", user);
		pw = NULL;
	}
	if (as != NULL)
		auth_close(as);
#endif
#endif
	if (pw != NULL)
		return (pwcopy(pw));
	return (NULL);
}

void
auth_debug_add(const char *fmt,...)
{
	char buf[1024];
	va_list args;

	if (!auth_debug_init)
		return;

	va_start(args, fmt);
	vsnprintf(buf, sizeof(buf), fmt, args);
	va_end(args);
	buffer_put_cstring(&auth_debug, buf);
}

void
auth_debug_send(void)
{
	char *msg;

	if (!auth_debug_init)
		return;
	while (buffer_len(&auth_debug)) {
		msg = buffer_get_string(&auth_debug, NULL);
		packet_send_debug("%s", msg);
		xfree(msg);
	}
}

void
auth_debug_reset(void)
{
	if (auth_debug_init)
		buffer_clear(&auth_debug);
	else {
		buffer_init(&auth_debug);
		auth_debug_init = 1;
	}
}

struct passwd *
fakepw(void)
{
	static struct passwd fake;

	memset(&fake, 0, sizeof(fake));
	fake.pw_name = "NOUSER";
	fake.pw_passwd =
	    "$2a$06$r3.juUaHZDlIbQaO2dS9FuYxL1W9M81R1Tc92PoSNmzvpEqLkLGrK";
	fake.pw_gecos = "NOUSER";
	fake.pw_uid = (uid_t)-1;
	fake.pw_gid = (gid_t)-1;
#ifdef HAVE_PW_CLASS_IN_PASSWD
	fake.pw_class = "";
#endif
	fake.pw_dir = "/nonexist";
	fake.pw_shell = "/nonexist";

	return (&fake);
}