# $Id: Makefile.in,v 1.168 2001/04/16 00:41:46 djm Exp $

prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
sbindir=@sbindir@
libexecdir=@libexecdir@
mandir=@mandir@
sysconfdir=@sysconfdir@
piddir=@piddir@
srcdir=@srcdir@
top_srcdir=@top_srcdir@

DESTDIR=
VPATH=@srcdir@
SSH_PROGRAM=@bindir@/ssh
ASKPASS_PROGRAM=$(libexecdir)/ssh-askpass
SFTP_SERVER=$(libexecdir)/sftp-server

PATHS= -DETCDIR=\"$(sysconfdir)\" \
	-D_PATH_SSH_PROGRAM=\"$(SSH_PROGRAM)\" \
	-D_PATH_SSH_ASKPASS_DEFAULT=\"$(ASKPASS_PROGRAM)\" \
	-D_PATH_SFTP_SERVER=\"$(SFTP_SERVER)\"

CC=@CC@
LD=@LD@
CFLAGS=@CFLAGS@
CPPFLAGS=-I. -I$(srcdir) @CPPFLAGS@ $(PATHS) @DEFS@
LIBS=@LIBS@
AR=@AR@
RANLIB=@RANLIB@
INSTALL=@INSTALL@
PERL=@PERL@
ENT=@ENT@
XAUTH_PATH=@XAUTH_PATH@
LDFLAGS=-L. -Lopenbsd-compat/ @LDFLAGS@
EXEEXT=@EXEEXT@
SSH_MODE= @SSHMODE@

INSTALL_SSH_PRNG_CMDS=@INSTALL_SSH_PRNG_CMDS@

@NO_SFTP@SFTP_PROGS=sftp-server$(EXEEXT) sftp$(EXEEXT)

TARGETS=ssh$(EXEEXT) sshd$(EXEEXT) ssh-add$(EXEEXT) ssh-keygen$(EXEEXT) ssh-keyscan${EXEEXT} ssh-agent$(EXEEXT) scp$(EXEEXT) $(SFTP_PROGS)

LIBSSH_OBJS=atomicio.o authfd.o authfile.o bufaux.o buffer.o canohost.o channels.o cipher.o cli.o compat.o compress.o crc32.o deattack.o dh.o dispatch.o mac.o hostfile.o key.o kex.o kexdh.o kexgex.o log.o match.o misc.o mpaux.o nchan.o packet.o radix.o rijndael.o entropy.o readpass.o rsa.o ssh-dss.o ssh-rsa.o tildexpand.o ttymodes.o uidswap.o uuencode.o xmalloc.o 

SSHOBJS= ssh.o sshconnect.o sshconnect1.o sshconnect2.o sshtty.o readconf.o clientloop.o

SSHDOBJS= sshd.o auth.o auth1.o auth2.o auth-chall.o auth2-chall.o auth-rhosts.o auth-options.o auth-krb4.o auth-pam.o auth2-pam.o auth-passwd.o auth-rsa.o auth-rh-rsa.o auth-sia.o sshpty.o sshlogin.o loginrec.o servconf.o serverloop.o md5crypt.o session.o groupaccess.o

MANPAGES	= scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out
MANTYPE		= @MANTYPE@

CONFIGFILES=sshd_config ssh_config primes

PATHSUBS	= \
	-D/etc/ssh_config=$(sysconfdir)/ssh_config \
	-D/etc/ssh_known_hosts=$(sysconfdir)/ssh_known_hosts \
	-D/etc/sshd_config=$(sysconfdir)/sshd_config \
	-D/usr/libexec=$(libexecdir) \
	-D/etc/shosts.equiv=$(sysconfdir)/shosts.equiv \
	-D/etc/ssh_host_key=$(sysconfdir)/ssh_host_key \
	-D/etc/ssh_host_dsa_key=$(sysconfdir)/ssh_host_dsa_key \
	-D/etc/ssh_host_rsa_key=$(sysconfdir)/ssh_host_rsa_key \
	-D/var/run/sshd.pid=$(piddir)/sshd.pid \
	-D/etc/primes=$(sysconfdir)/primes \
	-D/etc/sshrc=$(sysconfdir)/sshrc \
	-D/usr/X11R6/bin/xauth=$(XAUTH_PATH) \
	-D/usr/bin:/bin:/usr/sbin:/sbin=@user_path@

FIXPATHSCMD	= $(PERL) $(srcdir)/fixpaths $(PATHSUBS)

all: $(CONFIGFILES) $(MANPAGES) $(TARGETS)

$(LIBSSH_OBJS): config.h
$(SSHOBJS): config.h
$(SSHDOBJS): config.h

.c.o:
	$(CC) $(CFLAGS) $(CPPFLAGS) -c $<

LIBCOMPAT=openbsd-compat/libopenbsd-compat.a
$(LIBCOMPAT): config.h
	(cd openbsd-compat; $(MAKE))

libssh.a: $(LIBSSH_OBJS)
	$(AR) rv $@ $(LIBSSH_OBJS)
	$(RANLIB) $@

ssh$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHOBJS)
	$(LD) -o $@ $(SSHOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

sshd$(EXEEXT): libssh.a	$(LIBCOMPAT) $(SSHDOBJS)
	$(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

scp$(EXEEXT): $(LIBCOMPAT) libssh.a scp.o
	$(LD) -o $@ scp.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o
	$(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 

ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-agent.o
	$(LD) -o $@ ssh-agent.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 

ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keygen.o
	$(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 

ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o
	$(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 

sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o
	$(LD) -o $@ sftp-server.o sftp-common.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 

sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-int.o sftp-common.o sftp-glob.o
	$(LD) -o $@ sftp.o sftp-client.o sftp-common.o sftp-int.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

# test driver for the loginrec code - not built by default
logintest: logintest.o $(LIBCOMPAT) libssh.a loginrec.o
	$(LD) -o $@ logintest.o $(LDFLAGS) loginrec.o -lopenbsd-compat -lssh $(LIBS)

$(MANPAGES): %.out: %
	if test "$(MANTYPE)" = "cat"; then \
		manpage=`echo $< | sed 's/\.[1-9]$$/\.0/'`; \
	else \
		manpage=$<; \
	fi; \
	if test "$(MANTYPE)" = "man"; then \
		$(FIXPATHSCMD) $(srcdir)/$${manpage} | $(PERL) $(srcdir)/mdoc2man.pl > $@; \
	else \
		$(FIXPATHSCMD) $(srcdir)/$${manpage} > $@; \
	fi

$(CONFIGFILES)::
	$(FIXPATHSCMD) $(srcdir)/$@ > $@.out

clean:
	(cd openbsd-compat; $(MAKE) clean)
	rm -f *.o *.a $(TARGETS) logintest config.cache config.log 
	rm -f *.out core

distclean: clean
	(cd openbsd-compat; $(MAKE) distclean)
	rm -f Makefile config.h config.status ssh_prng_cmds *~

mrproper: distclean

veryclean: distclean
	rm -f configure config.h.in *.0

catman-do:
	@for f in $(TROFFMAN) ; do \
		base=`echo $$f | sed 's/\..*$$//'` ; \
		echo "$$f -> $$base.0" ; \
		nroff -mandoc $$f | cat -v | sed -e 's/.\^H//g' \
			>$$base.0 ; \
	done

distprep: catman-do
	autoreconf

install: $(TARGETS) install-files host-key

install-files:
	$(srcdir)/mkinstalldirs $(DESTDIR)$(bindir)
	$(srcdir)/mkinstalldirs $(DESTDIR)$(sbindir)
	$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)
	$(srcdir)/mkinstalldirs $(DESTDIR)$(libexecdir)
	$(INSTALL) -m $(SSH_MODE) -s ssh $(DESTDIR)$(bindir)/ssh
	$(INSTALL) -m 0755 -s scp $(DESTDIR)$(bindir)/scp
	$(INSTALL) -m 0755 -s ssh-add $(DESTDIR)$(bindir)/ssh-add
	$(INSTALL) -m 0755 -s ssh-agent $(DESTDIR)$(bindir)/ssh-agent
	$(INSTALL) -m 0755 -s ssh-keygen $(DESTDIR)$(bindir)/ssh-keygen
	$(INSTALL) -m 0755 -s ssh-keyscan $(DESTDIR)$(bindir)/ssh-keyscan
	$(INSTALL) -m 0755 -s sshd $(DESTDIR)$(sbindir)/sshd
	@NO_SFTP@$(INSTALL) -m 0755 -s sftp $(DESTDIR)$(bindir)/sftp
	@NO_SFTP@$(INSTALL) -m 0755 -s sftp-server $(DESTDIR)$(SFTP_SERVER)
	if test "$(MANTYPE)" = "doc"; then \
		mansubdir="man"; \
	else \
		mansubdir="$(MANTYPE)"; \
	fi; \
	$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$${mansubdir}1; \
	$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$${mansubdir}8; \
	$(INSTALL) -m 644 ssh.1.out $(DESTDIR)$(mandir)/$${mansubdir}1/ssh.1; \
	$(INSTALL) -m 644 scp.1.out $(DESTDIR)$(mandir)/$${mansubdir}1/scp.1; \
	$(INSTALL) -m 644 ssh-add.1.out $(DESTDIR)$(mandir)/$${mansubdir}1/ssh-add.1; \
	$(INSTALL) -m 644 ssh-agent.1.out $(DESTDIR)$(mandir)/$${mansubdir}1/ssh-agent.1; \
	$(INSTALL) -m 644 ssh-keygen.1.out $(DESTDIR)$(mandir)/$${mansubdir}1/ssh-keygen.1; \
	$(INSTALL) -m 644 ssh-keyscan.1.out $(DESTDIR)$(mandir)/$${mansubdir}1/ssh-keyscan.1; \
	$(INSTALL) -m 644 sshd.8.out $(DESTDIR)$(mandir)/$${mansubdir}8/sshd.8; \
	@NO_SFTP@$(INSTALL) -m 644 sftp.1.out $(DESTDIR)$(mandir)/$${mansubdir}1/sftp.1; \
	@NO_SFTP@$(INSTALL) -m 644 sftp-server.8.out $(DESTDIR)$(mandir)/$${mansubdir}8/sftp-server.8;
	-rm -f $(DESTDIR)$(bindir)/slogin
	ln -s ssh$(EXEEXT) $(DESTDIR)$(bindir)/slogin
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
	ln -s ssh.1 $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
	@FILEPRIV@ -f dev,filesys,driver $(DESTDIR)$(bindir)/ssh $(DESTDIR)$(bindir)/slogin
	if [ ! -d $(DESTDIR)$(sysconfdir) ]; then \
		$(srcdir)/mkinstalldirs $(DESTDIR)$(sysconfdir); \
	fi
	if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_config ]; then \
		$(INSTALL) -m 644 ssh_config.out $(DESTDIR)$(sysconfdir)/ssh_config; \
	else \
		echo "$(DESTDIR)$(sysconfdir)/ssh_config already exists, install will not overwrite"; \
	fi
	if [ ! -f $(DESTDIR)$(sysconfdir)/sshd_config ]; then \
		$(INSTALL) -m 644 sshd_config.out $(DESTDIR)$(sysconfdir)/sshd_config; \
	else \
		echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \
	fi
	if [ -f ssh_prng_cmds -a ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \
		$(PERL) $(srcdir)/fixprogs ssh_prng_cmds $(ENT); \
		if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds ] ; then \
			$(INSTALL) -m 644 ssh_prng_cmds.out $(DESTDIR)$(sysconfdir)/ssh_prng_cmds; \
		else \
			echo "$(DESTDIR)$(sysconfdir)/ssh_prng_cmds already exists, install will not overwrite"; \
		fi ; \
	fi
	if [ ! -f $(DESTDIR)$(sysconfdir)/primes ]; then \
		$(INSTALL) -m 644 primes.out $(DESTDIR)$(sysconfdir)/primes; \
	else \
		echo "$(DESTDIR)$(sysconfdir)/primes already exists, install will not overwrite"; \
	fi

host-key: ssh-keygen$(EXEEXT)
	if [ -z "$(DESTDIR)" ] ; then \
		if [ -f "$(DESTDIR)$(sysconfdir)/ssh_host_key" ] ; then \
			echo "$(DESTDIR)$(sysconfdir)/ssh_host_key already exists, skipping." ; \
		else \
			./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N "" ; \
		fi ; \
		if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key ] ; then \
			echo "$(DESTDIR)$(sysconfdir)/ssh_host_dsa_key already exists, skipping." ; \
		else \
			./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N "" ; \
		fi ; \
		if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key ] ; then \
			echo "$(DESTDIR)$(sysconfdir)/ssh_host_rsa_key already exists, skipping." ; \
		else \
			./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N "" ; \
		fi ; \
	fi ;

host-key-force: ssh-keygen$(EXEEXT)
	./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N ""
	./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N ""
	./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N ""

uninstallall:	uninstall
	-rm -f $(DESTDIR)$(sysconfdir)/ssh_config
	-rm -f $(DESTDIR)$(sysconfdir)/sshd_config
	-rm -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds
	-rmdir $(DESTDIR)$(sysconfdir)
	-rmdir $(DESTDIR)$(bindir)
	-rmdir $(DESTDIR)$(sbindir)
	-rmdir $(DESTDIR)$(mandir)/$(mansubdir)1
	-rmdir $(DESTDIR)$(mandir)/$(mansubdir)8
	-rmdir $(DESTDIR)$(mandir)
	-rmdir $(DESTDIR)$(libexecdir)

uninstall: 
	-rm -f $(DESTDIR)$(bindir)/slogin
	-rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-add$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/sftp$(EXEEXT)
	-rm -f $(DESTDIR)$(sbindir)/sshd$(EXEEXT)
	-rm -r $(DESTDIR)$(SFTP_SERVER)$(EXEEXT)
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1