ChangeLog

20131205
 - (djm) OpenBSD CVS Sync
   - jmc@cvs.openbsd.org 2013/11/21 08:05:09
     [ssh_config.5 sshd_config.5]
     no need for .Pp before displays;

20131121
 - (djm) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2013/11/08 11:15:19
     [bufaux.c bufbn.c buffer.c sftp-client.c sftp-common.c sftp-glob.c]
     [uidswap.c] Include stdlib.h for free() as per the man page.
   - markus@cvs.openbsd.org 2013/11/13 13:48:20
     [ssh-pkcs11.c]
     add missing braces found by pedro
   - djm@cvs.openbsd.org 2013/11/20 02:19:01
     [sshd.c]
     delay closure of in/out fds until after "Bad protocol version
     identification..." message, as get_remote_ipaddr/get_remote_port
     require them open.
   - deraadt@cvs.openbsd.org 2013/11/20 20:53:10
     [scp.c]
     unsigned casts for ctype macros where neccessary
     ok guenther millert markus
   - deraadt@cvs.openbsd.org 2013/11/20 20:54:10
     [canohost.c clientloop.c match.c readconf.c sftp.c]
     unsigned casts for ctype macros where neccessary
     ok guenther millert markus
   - djm@cvs.openbsd.org 2013/11/21 00:45:44
     [Makefile.in PROTOCOL PROTOCOL.chacha20poly1305 authfile.c chacha.c]
     [chacha.h cipher-chachapoly.c cipher-chachapoly.h cipher.c cipher.h]
     [dh.c myproposal.h packet.c poly1305.c poly1305.h servconf.c ssh.1]
     [ssh.c ssh_config.5 sshd_config.5] Add a new protocol 2 transport
     cipher "chacha20-poly1305@openssh.com" that combines Daniel
     Bernstein's ChaCha20 stream cipher and Poly1305 MAC to build an
     authenticated encryption mode.
     
     Inspired by and similar to Adam Langley's proposal for TLS:
     http://tools.ietf.org/html/draft-agl-tls-chacha20poly1305-03
     but differs in layout used for the MAC calculation and the use of a
     second ChaCha20 instance to separately encrypt packet lengths.
     Details are in the PROTOCOL.chacha20poly1305 file.
     
     Feedback markus@, naddy@; manpage bits Loganden Velvindron @ AfriNIC
     ok markus@ naddy@
   - naddy@cvs.openbsd.org 2013/11/18 05:09:32
     [regress/forward-control.sh]
     bump timeout to 10 seconds to allow slow machines (e.g. Alpha PC164)
     to successfully run this; ok djm@
   - djm@cvs.openbsd.org 2013/11/21 03:15:46
     [regress/krl.sh]
     add some reminders for additional tests that I'd like to implement
   - djm@cvs.openbsd.org 2013/11/21 03:16:47
     [regress/modpipe.c]
     use unsigned long long instead of u_int64_t here to avoid warnings
     on some systems portable OpenSSH is built on.
   - djm@cvs.openbsd.org 2013/11/21 03:18:51
     [regress/cipher-speed.sh regress/integrity.sh regress/rekey.sh]
     [regress/try-ciphers.sh]
     use new "ssh -Q cipher-auth" query to obtain lists of authenticated
     encryption ciphers instead of specifying them manually; ensures that
     the new chacha20poly1305@openssh.com mode is tested;
     
     ok markus@ and naddy@ as part of the diff to add
     chacha20poly1305@openssh.com

20131110
 - (dtucker) [regress/keytype.sh] Populate ECDSA key types to be tested by
   querying the ones that are compiled in.

20131109
 - (dtucker) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2013/11/09 05:41:34
     [regress/test-exec.sh regress/rekey.sh]
     Use smaller test data files to speed up tests.  Grow test datafiles
     where necessary for a specific test.
 - (dtucker) [configure.ac kex.c key.c myproposal.h] Test for the presence of
   NID_X9_62_prime256v1, NID_secp384r1 and NID_secp521r1 and test that the
   latter actually works before using it.  Fedora (at least) has NID_secp521r1
   that doesn't work (see https://bugzilla.redhat.com/show_bug.cgi?id=1021897).
 - (dtucker) [configure.ac] Fix brackets in NID_secp521r1 test.
 - (dtucker) [configure.ac] Add missing "test".
 - (dtucker) [key.c] Check for the correct defines for NID_secp521r1.

20131108
 - (dtucker) OpenBSD CVS Sync
    - dtucker@cvs.openbsd.org 2013/11/08 01:06:14
      [regress/rekey.sh]
      Rekey less frequently during tests to speed them up
 - (djm) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2013/11/07 11:58:27
     [cipher.c cipher.h kex.c kex.h mac.c mac.h servconf.c ssh.c]
     Output the effective values of Ciphers, MACs and KexAlgorithms when
     the default has not been overridden.  ok markus@
   - djm@cvs.openbsd.org 2013/11/08 00:39:15
     [auth-options.c auth2-chall.c authfd.c channels.c cipher-3des1.c]
     [clientloop.c gss-genr.c monitor_mm.c packet.c schnorr.c umac.c]
     [sftp-client.c sftp-glob.c]
     use calloc for all structure allocations; from markus@
   - djm@cvs.openbsd.org 2013/11/08 01:38:11
     [version.h]
     openssh-6.4
 - (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
   [contrib/suse/openssh.spec] Update version numbers following release.
 - (dtucker) [openbsd-compat/openbsd-compat.h] Add null implementation of
   arc4random_stir for platforms that have arc4random but don't have
   arc4random_stir (right now this is only OpenBSD -current).
 - (dtucker) [kex.c] Only enable CURVE25519_SHA256 if we actually have
   EVP_sha256.
 - (dtucker) [myproposal.h] Conditionally enable CURVE25519_SHA256.
 - (dtucker) [openbsd-compat/bsd-poll.c] Add headers to prevent compile
   warnings.
 - (dtucker) [Makefile.in configure.ac] Set MALLOC_OPTIONS per platform
   and pass in TEST_ENV.  use stderr to get polluted
   and the stderr-data test to fail.
 - (dtucker) [contrib/cygwin/ssh-host-config] Simplify host key generation:
   rather than testing and generating each key, call ssh-keygen -A.
   Patch from vinschen at redhat.com.
 - (dtucker) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2013/11/09 05:41:34
     [regress/test-exec.sh regress/rekey.sh]
     Use smaller test data files to speed up tests.  Grow test datafiles
     where necessary for a specific test.

20131107
 - (djm) [ssh-pkcs11.c] Bring back "non-constant initialiser" fix (rev 1.5)
   that got lost in recent merge.
 - (djm) [Makefile.in monitor.c] Missed chunks of curve25519 KEX diff
 - (djm) [regress/modpipe.c regress/rekey.sh] Never intended to commit these
 - (djm) [configure.ac defines.h] Skip arc4random_stir() calls on platforms
   that lack it but have arc4random_uniform()
 - (djm) OpenBSD CVS Sync
   - markus@cvs.openbsd.org 2013/11/04 11:51:16
     [monitor.c]
     fix rekeying for KEX_C25519_SHA256; noted by dtucker@
     RCSID sync only; I thought this was a merge botch and fixed it already
   - markus@cvs.openbsd.org 2013/11/06 16:52:11
     [monitor_wrap.c]
     fix rekeying for AES-GCM modes; ok deraadt
   - djm@cvs.openbsd.org 2013/11/06 23:05:59
     [ssh-pkcs11.c]
     from portable: s/true/true_val/ to avoid name collisions on dump platforms
     RCSID sync only
 - (dtucker) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/10/09 23:44:14
     [regress/Makefile] (ID sync only)
     regression test for sftp request white/blacklisting and readonly mode.
   - markus@cvs.openbsd.org 2013/11/02 22:39:53
     [regress/kextype.sh]
     add curve25519-sha256@libssh.org
   - dtucker@cvs.openbsd.org 2013/11/04 12:27:42
     [regress/rekey.sh]
     Test rekeying with all KexAlgorithms.
   - dtucker@cvs.openbsd.org 2013/11/07 00:12:05
     [regress/rekey.sh]
     Test rekeying for every Cipher, MAC and KEX, plus test every KEX with
     the GCM ciphers.
   - dtucker@cvs.openbsd.org 2013/11/07 01:12:51
     [regress/rekey.sh]
     Factor out the data transfer rekey tests
   - dtucker@cvs.openbsd.org 2013/11/07 02:48:38
     [regress/integrity.sh regress/cipher-speed.sh regress/try-ciphers.sh]
     Use ssh -Q instead of hardcoding lists of ciphers or MACs.
   - dtucker@cvs.openbsd.org 2013/11/07 03:55:41
     [regress/kextype.sh]
     Use ssh -Q to get kex types instead of a static list.
   - dtucker@cvs.openbsd.org 2013/11/07 04:26:56
     [regress/kextype.sh]
     trailing space
 - (dtucker) [Makefile.in configure.ac] Remove TEST_SSH_SHA256 environment
   variable.  It's no longer used now that we get the supported MACs from
   ssh -Q.

20131104
 - (djm) OpenBSD CVS Sync
   - markus@cvs.openbsd.org 2013/11/02 20:03:54
     [ssh-pkcs11.c]
     support pkcs#11 tokes that only provide x509 zerts instead of raw pubkeys;
     fixes bz#1908; based on patch from Laurent Barbe; ok djm
   - markus@cvs.openbsd.org 2013/11/02 21:59:15
     [kex.c kex.h myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
     use curve25519 for default key exchange (curve25519-sha256@libssh.org);
     initial patch from Aris Adamantiadis; ok djm@
   - markus@cvs.openbsd.org 2013/11/02 22:10:15
     [kexdhs.c kexecdhs.c]
     no need to include monitor_wrap.h
   - markus@cvs.openbsd.org 2013/11/02 22:24:24
     [kexdhs.c kexecdhs.c]
     no need to include ssh-gss.h
   - markus@cvs.openbsd.org 2013/11/02 22:34:01
     [auth-options.c]
     no need to include monitor_wrap.h and ssh-gss.h
   - markus@cvs.openbsd.org 2013/11/02 22:39:19
     [ssh_config.5 sshd_config.5]
     the default kex is now curve25519-sha256@libssh.org
   - djm@cvs.openbsd.org 2013/11/03 10:37:19
     [roaming_common.c]
     fix a couple of function definitions foo() -> foo(void)
     (-Wold-style-definition)
 - (djm) [kexc25519.c kexc25519c.c kexc25519s.c] Import missed files from
   KEX/curve25519 change

20131103
 - (dtucker) [openbsd-compat/bsd-misc.c] Include time.h for nanosleep.
   From OpenSMTPD where it prevents "implicit declaration" warnings (it's
   a no-op in OpenSSH).  From chl at openbsd.
 - (dtucker) [openbsd-compat/setproctitle.c] Handle error case form the 2nd
   vsnprintf.  From eric at openbsd via chl@.
 - (dtucker) [configure.ac defines.h] Add typedefs for intmax_t and uintmax_t
   for platforms that don't have them.

20131030
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/10/29 09:42:11
     [key.c key.h]
     fix potential stack exhaustion caused by nested certificates;
     report by Mateusz Kocielski; ok dtucker@ markus@
   - djm@cvs.openbsd.org 2013/10/29 09:48:02
     [servconf.c servconf.h session.c sshd_config sshd_config.5]
     shd_config PermitTTY to disallow TTY allocation, mirroring the
     longstanding no-pty authorized_keys option;
     bz#2070, patch from Teran McKinney; ok markus@
   - jmc@cvs.openbsd.org 2013/10/29 18:49:32
     [sshd_config.5]
     pty(4), not pty(7);

20131026
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/10/25 23:04:51
     [ssh.c]
     fix crash when using ProxyCommand caused by previous commit - was calling
     freeaddrinfo(NULL); spotted by sthen@ and Tim Ruehsen, patch by sthen@

20131025
 - (djm) [ssh-keygen.c ssh-keysign.c sshconnect1.c sshd.c] Remove
   unnecessary arc4random_stir() calls. The only ones left are to ensure
   that the PRNG gets a different state after fork() for platforms that
   have broken the API.

20131024
 - (djm) [auth-krb5.c] bz#2032 - use local username in krb5_kuserok check
   rather than full client name which may be of form user@REALM;
   patch from Miguel Sanders; ok dtucker@
 - (djm) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2013/10/23 05:40:58
     [servconf.c]
     fix comment
   - djm@cvs.openbsd.org 2013/10/23 23:35:32
     [sshd.c]
     include local address and port in "Connection from ..." message (only
     shown at loglevel>=verbose)
   - dtucker@cvs.openbsd.org 2013/10/24 00:49:49
     [moduli.c]
     Periodically print progress and, if possible, expected time to completion
     when screening moduli for DH groups.  ok deraadt djm
   - dtucker@cvs.openbsd.org 2013/10/24 00:51:48
     [readconf.c servconf.c ssh_config.5 sshd_config.5]
     Disallow empty Match statements and add "Match all" which matches
     everything.  ok djm, man page help jmc@
   - djm@cvs.openbsd.org 2013/10/24 08:19:36
     [ssh.c]
     fix bug introduced in hostname canonicalisation commit: don't try to
     resolve hostnames when a ProxyCommand is set unless the user has forced
     canonicalisation; spotted by Iain Morgan
 - (tim) [regress/sftp-perm.sh] We need a shell that understands "! somecmd"

20131023
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/10/20 04:39:28
     [ssh_config.5]
     document % expansions performed by "Match command ..."
   - djm@cvs.openbsd.org 2013/10/20 06:19:28
     [readconf.c ssh_config.5]
     rename "command" subclause of the recently-added "Match" keyword to
     "exec"; it's shorter, clearer in intent and we might want to add the
     ability to match against the command being executed at the remote end in
     the future.
   - djm@cvs.openbsd.org 2013/10/20 09:51:26
     [scp.1 sftp.1]
     add canonicalisation options to -o lists
   - jmc@cvs.openbsd.org 2013/10/20 18:00:13
     [ssh_config.5]
     tweak the "exec" description, as worded by djm;
   - djm@cvs.openbsd.org 2013/10/23 03:03:07
     [readconf.c]
     Hostname may have %h sequences that should be expanded prior to Match
     evaluation; spotted by Iain Morgan
   - djm@cvs.openbsd.org 2013/10/23 03:05:19
     [readconf.c ssh.c]
     comment
   - djm@cvs.openbsd.org 2013/10/23 04:16:22
     [ssh-keygen.c]
     Make code match documentation: relative-specified certificate expiry time
     should be relative to current time and not the validity start time.
     Reported by Petr Lautrbach; ok deraadt@

20131018
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/10/09 23:44:14
     [regress/Makefile regress/sftp-perm.sh]
     regression test for sftp request white/blacklisting and readonly mode.
   - jmc@cvs.openbsd.org 2013/10/17 07:35:48
     [sftp.1 sftp.c]
     tweak previous;
   - djm@cvs.openbsd.org 2013/10/17 22:08:04
     [sshd.c]
     include remote port in bad banner message; bz#2162

20131017
 - (djm) OpenBSD CVS Sync
   - jmc@cvs.openbsd.org 2013/10/15 14:10:25
     [ssh.1 ssh_config.5]
     tweak previous;
   - djm@cvs.openbsd.org 2013/10/16 02:31:47
     [readconf.c readconf.h roaming_client.c ssh.1 ssh.c ssh_config.5]
     [sshconnect.c sshconnect.h]
     Implement client-side hostname canonicalisation to allow an explicit
     search path of domain suffixes to use to convert unqualified host names
     to fully-qualified ones for host key matching.
     This is particularly useful for host certificates, which would otherwise
     need to list unqualified names alongside fully-qualified ones (and this
     causes a number of problems).
     "looks fine" markus@
   - jmc@cvs.openbsd.org 2013/10/16 06:42:25
     [ssh_config.5]
     tweak previous;
   - djm@cvs.openbsd.org 2013/10/16 22:49:39
     [readconf.c readconf.h ssh.1 ssh.c ssh_config.5]
     s/canonicalise/canonicalize/ for consistency with existing spelling,
     e.g. authorized_keys; pointed out by naddy@
   - djm@cvs.openbsd.org 2013/10/16 22:58:01
     [ssh.c ssh_config.5]
     one I missed in previous: s/isation/ization/
   - djm@cvs.openbsd.org 2013/10/17 00:30:13
     [PROTOCOL sftp-client.c sftp-client.h sftp-server.c sftp.1 sftp.c]
     fsync@openssh.com protocol extension for sftp-server
     client support to allow calling fsync() faster successful transfer
     patch mostly by imorgan AT nas.nasa.gov; bz#1798
     "fine" markus@ "grumble OK" deraadt@ "doesn't sound bad to me" millert@
   - djm@cvs.openbsd.org 2013/10/17 00:46:49
     [ssh.c]
     rearrange check to reduce diff against -portable
     (Id sync only)

20131015
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/10/09 23:42:17
     [sftp-server.8 sftp-server.c]
     Add ability to whitelist and/or blacklist sftp protocol requests by name.
     Refactor dispatch loop and consolidate read-only mode checks.
     Make global variables static, since sftp-server is linked into sshd(8).
     ok dtucker@
   - djm@cvs.openbsd.org 2013/10/10 00:53:25
     [sftp-server.c]
     add -Q, -P and -p to usage() before jmc@ catches me
   - djm@cvs.openbsd.org 2013/10/10 01:43:03
     [sshd.c]
     bz#2139: fix re-exec fallback by ensuring that startup_pipe is correctly
     updated; ok dtucker@
   - djm@cvs.openbsd.org 2013/10/11 02:45:36
     [sftp-client.c]
     rename flag arguments to be more clear and consistent.
     reorder some internal function arguments to make adding additional flags
     easier.
     no functional change
   - djm@cvs.openbsd.org 2013/10/11 02:52:23
     [sftp-client.c]
     missed one arg reorder
   - djm@cvs.openbsd.org 2013/10/11 02:53:45
     [sftp-client.h]
     obsolete comment
   - jmc@cvs.openbsd.org 2013/10/14 14:18:56
     [sftp-server.8 sftp-server.c]
     tweak previous;
     ok djm
   - djm@cvs.openbsd.org 2013/10/14 21:20:52
     [session.c session.h]
     Add logging of session starts in a useful format; ok markus@ feedback and
     ok dtucker@
   - djm@cvs.openbsd.org 2013/10/14 22:22:05
     [readconf.c readconf.h ssh-keysign.c ssh.c ssh_config.5]
     add a "Match" keyword to ssh_config that allows matching on hostname,
     user and result of arbitrary commands. "nice work" markus@
   - djm@cvs.openbsd.org 2013/10/14 23:28:23
     [canohost.c misc.c misc.h readconf.c sftp-server.c ssh.c]
     refactor client config code a little:
     add multistate option partsing to readconf.c, similar to servconf.c's
     existing code.
     move checking of options that accept "none" as an argument to readconf.c
     add a lowercase() function and use it instead of explicit tolower() in
     loops
     part of a larger diff that was ok markus@
   - djm@cvs.openbsd.org 2013/10/14 23:31:01
     [ssh.c]
     whitespace at EOL; pointed out by markus@
 - [ssh.c] g/c unused variable.

20131010
 - (dtucker) OpenBSD CVS Sync
   - sthen@cvs.openbsd.org 2013/09/16 11:35:43
     [ssh_config]
     Remove gssapi config parts from ssh_config, as was already done for
     sshd_config.  Req by/ok ajacoutot@
     ID SYNC ONLY for portable; kerberos/gssapi is still pretty popular
   - djm@cvs.openbsd.org 2013/09/19 00:24:52
     [progressmeter.c]
     store the initial file offset so the progress meter doesn't freak out
     when resuming sftp transfers. bz#2137; patch from Iain Morgan; ok dtucker@`
   - djm@cvs.openbsd.org 2013/09/19 00:49:12
     [sftp-client.c]
     fix swapped pflag and printflag in sftp upload_dir; from Iain Morgan
   - djm@cvs.openbsd.org 2013/09/19 01:24:46
     [channels.c]
     bz#1297 - tell the client (via packet_send_debug) when their preferred
     listen address has been overridden by the server's GatewayPorts;
     ok dtucker@
   - djm@cvs.openbsd.org 2013/09/19 01:26:29
     [sshconnect.c]
     bz#1211: make BindAddress work with UsePrivilegedPort=yes; patch from
     swp AT swp.pp.ru; ok dtucker@
   - dtucker@cvs.openbsd.org 2013/10/08 11:42:13
     [dh.c dh.h]
     Increase the size of the Diffie-Hellman groups requested for a each
     symmetric key size.  New values from NIST Special Publication 800-57 with
     the upper limit specified by RFC4419.  Pointed out by Peter Backes, ok
     djm@.

20131009
 - (djm) [openbsd-compat/arc4random.c openbsd-compat/chacha_private.h] Pull
   in OpenBSD implementation of arc4random, shortly to replace the existing
   bsd-arc4random.c
 - (djm) [openbsd-compat/Makefile.in openbsd-compat/arc4random.c]
   [openbsd-compat/bsd-arc4random.c] Replace old RC4-based arc4random
   implementation with recent OpenBSD's ChaCha-based PRNG. ok dtucker@,
   tested tim@

20130922
 - (dtucker) [platform.c platform.h sshd.c] bz#2156: restore Linux oom_adj
   setting when handling SIGHUP to maintain behaviour over retart.  Patch
   from Matthew Ife.

20130918
 - (dtucker) [sshd_config] Trailing whitespace; from jstjohn at purdue edu.

20130914
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/08/22 19:02:21
     [sshd.c]
     Stir PRNG after post-accept fork. The child gets a different PRNG state
     anyway via rexec and explicit privsep reseeds, but it's good to be sure.
     ok markus@
   - mikeb@cvs.openbsd.org 2013/08/28 12:34:27
     [ssh-keygen.c]
     improve batch processing a bit by making use of the quite flag a bit
     more often and exit with a non zero code if asked to find a hostname
     in a known_hosts file and it wasn't there;
     originally from reyk@,  ok djm
   - djm@cvs.openbsd.org 2013/08/31 00:13:54
     [sftp.c]
     make ^w match ksh behaviour (delete previous word instead of entire line)
   - deraadt@cvs.openbsd.org 2013/09/02 22:00:34
     [ssh-keygen.c sshconnect1.c sshd.c]
     All the instances of arc4random_stir() are bogus, since arc4random()
     does this itself, inside itself, and has for a very long time..  Actually,
     this was probably reducing the entropy available.
     ok djm
     ID SYNC ONLY for portable; we don't trust other arc4random implementations
     to do this right.
   - sthen@cvs.openbsd.org 2013/09/07 13:53:11
     [sshd_config]
     Remove commented-out kerberos/gssapi config options from sample config,
     kerberos support is currently not enabled in ssh in OpenBSD. Discussed with
     various people; ok deraadt@
     ID SYNC ONLY for portable; kerberos/gssapi is still pretty popular
   - djm@cvs.openbsd.org 2013/09/12 01:41:12
     [clientloop.c]
     fix connection crash when sending break (~B) on ControlPersist'd session;
     ok dtucker@
   - djm@cvs.openbsd.org 2013/09/13 06:54:34
     [channels.c]
     avoid unaligned access in code that reused a buffer to send a
     struct in_addr in a reply; simpler just use use buffer_put_int();
     from portable; spotted by and ok dtucker@

20130828
 - (djm) [openbsd-compat/bsd-snprintf.c] teach our local snprintf code the
   'j' (intmax_t/uintmax_t) and 'z' (size_t/ssize_t) conversions in case we
   start to use them in the future.
 - (djm) [openbsd-compat/bsd-snprintf.c] #ifdef noytet for intmax_t bits
   until we have configure support.

20130821
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/08/06 23:03:49
     [sftp.c]
     fix some whitespace at EOL
     make list of commands an enum rather than a long list of defines
     add -a to usage()
   - djm@cvs.openbsd.org 2013/08/06 23:05:01
     [sftp.1]
     document top-level -a option (the -a option to 'get' was already
     documented)
   - djm@cvs.openbsd.org 2013/08/06 23:06:01
     [servconf.c]
     add cast to avoid format warning; from portable
   - jmc@cvs.openbsd.org 2013/08/07 06:24:51
     [sftp.1 sftp.c]
     sort -a;
   - djm@cvs.openbsd.org 2013/08/08 04:52:04
     [sftp.c]
     fix two year old regression: symlinking a file would incorrectly
     canonicalise the target path. bz#2129 report from delphij AT freebsd.org
   - djm@cvs.openbsd.org 2013/08/08 05:04:03
     [sftp-client.c sftp-client.h sftp.c]
     add a "-l" flag for the rename command to force it to use the silly
     standard SSH_FXP_RENAME command instead of the POSIX-rename- like
     posix-rename@openssh.com extension.

     intended for use in regress tests, so no documentation.
   - djm@cvs.openbsd.org 2013/08/09 03:37:25
     [sftp.c]
     do getopt parsing for all sftp commands (with an empty optstring for
     commands without arguments) to ensure consistent behaviour
   - djm@cvs.openbsd.org 2013/08/09 03:39:13
     [sftp-client.c]
     two problems found by a to-be-committed regress test: 1) msg_id was not
     being initialised so was starting at a random value from the heap
     (harmless, but confusing). 2) some error conditions were not being
     propagated back to the caller
   - djm@cvs.openbsd.org 2013/08/09 03:56:42
     [sftp.c]
     enable ctrl-left-arrow and ctrl-right-arrow to move forward/back a word;
     matching ksh's relatively recent change.
   - djm@cvs.openbsd.org 2013/08/13 18:32:08
     [ssh-keygen.c]
     typo in error message; from Stephan Rickauer
   - djm@cvs.openbsd.org 2013/08/13 18:33:08
     [ssh-keygen.c]
     another of the same typo
   - jmc@cvs.openbsd.org 2013/08/14 08:39:27
     [scp.1 ssh.1]
     some Bx/Ox conversion;
     From: Jan Stary
   - djm@cvs.openbsd.org 2013/08/20 00:11:38
     [readconf.c readconf.h ssh_config.5 sshconnect.c]
     Add a ssh_config ProxyUseFDPass option that supports the use of
     ProxyCommands that establish a connection and then pass a connected
     file descriptor back to ssh(1). This allows the ProxyCommand to exit
     rather than have to shuffle data back and forth and enables ssh to use
     getpeername, etc. to obtain address information just like it does with
     regular directly-connected sockets. ok markus@
   - jmc@cvs.openbsd.org 2013/08/20 06:56:07
     [ssh.1 ssh_config.5]
     some proxyusefdpass tweaks;

20130808
 - (dtucker) [regress/Makefile regress/test-exec.sh] Don't try to use test -nt
   since some platforms (eg really old FreeBSD) don't have it.  Instead,
   run "make clean" before a complete regress run.  ok djm.
 - (dtucker) [misc.c] Fall back to time(2) at runtime if clock_gettime(
   CLOCK_MONOTONIC...) fails.  Some older versions of RHEL have the
   CLOCK_MONOTONIC define but don't actually support it.  Found and tested
   by Kevin Brott, ok djm.
 - (dtucker) [misc.c] Remove define added for fallback testing that was
   mistakenly included in the previous commit.
 - (dtucker) [regress/Makefile regress/test-exec.sh] Roll back the -nt
   removal.  The "make clean" removes modpipe which is built by the top-level
   directory before running the tests.  Spotted by tim@
 - (djm) Release 6.3p1

20130804
 - (dtucker) [auth-krb5.c configure.ac openbsd-compat/bsd-misc.h] Add support
   for building with older Heimdal versions.  ok djm.

20130801
 - (djm) [channels.c channels.h] bz#2135: On Solaris, isatty() on a non-
   blocking connecting socket will clear any stored errno that might
   otherwise have been retrievable via getsockopt(). A hack to limit writes
   to TTYs on AIX was triggering this. Since only AIX needs the hack, wrap
   it in an #ifdef. Diagnosis and patch from Ivo Raisr.
 - (djm) [sshlogin.h] Fix prototype merge botch from 2006; bz#2134

20130725
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/07/20 22:20:42
     [krl.c]
     fix verification error in (as-yet usused) KRL signature checking path
   - djm@cvs.openbsd.org 2013/07/22 05:00:17
     [umac.c]
     make MAC key, data to be hashed and nonce for final hash const;
     checked with -Wcast-qual
   - djm@cvs.openbsd.org 2013/07/22 12:20:02
     [umac.h]
     oops, forgot to commit corresponding header change;
     spotted by jsg and jasper
   - djm@cvs.openbsd.org 2013/07/25 00:29:10
     [ssh.c]
     daemonise backgrounded (ControlPersist'ed) multiplexing master to ensure
     it is fully detached from its controlling terminal. based on debugging
   - djm@cvs.openbsd.org 2013/07/25 00:56:52
     [sftp-client.c sftp-client.h sftp.1 sftp.c]
     sftp support for resuming partial downloads; patch mostly by Loganaden
     Velvindron/AfriNIC with some tweaks by me; feedback and ok dtucker@
     "Just be careful" deraadt@
   - djm@cvs.openbsd.org 2013/07/25 00:57:37
     [version.h]
     openssh-6.3 for release
   - dtucker@cvs.openbsd.org 2013/05/30 20:12:32
     [regress/test-exec.sh]
     use ssh and sshd as testdata since it needs to be >256k for the rekey test
   - dtucker@cvs.openbsd.org 2013/06/10 21:56:43
     [regress/forwarding.sh]
     Add test for forward config parsing
   - djm@cvs.openbsd.org 2013/06/21 02:26:26
     [regress/sftp-cmds.sh regress/test-exec.sh]
     unbreak sftp-cmds for renamed test data (s/ls/data/)
 - (tim) [sftp-client.c] Use of a gcc extension trips up native compilers on
   Solaris and UnixWare. Feedback and OK djm@
 - (tim) [regress/forwarding.sh] Fix for building outside source tree.

20130720
 - (djm) OpenBSD CVS Sync
   - markus@cvs.openbsd.org 2013/07/19 07:37:48
     [auth.h kex.h kexdhs.c kexecdhs.c kexgexs.c monitor.c servconf.c]
     [servconf.h session.c sshd.c sshd_config.5]
     add ssh-agent(1) support to sshd(8); allows encrypted hostkeys,
     or hostkeys on smartcards; most of the work by Zev Weiss; bz #1974
     ok djm@
   - djm@cvs.openbsd.org 2013/07/20 01:43:46
     [umac.c]
     use a union to ensure correct alignment; ok deraadt
   - djm@cvs.openbsd.org 2013/07/20 01:44:37
     [ssh-keygen.c ssh.c]
     More useful error message on missing current user in /etc/passwd
   - djm@cvs.openbsd.org 2013/07/20 01:50:20
     [ssh-agent.c]
     call cleanup_handler on SIGINT when in debug mode to ensure sockets
     are cleaned up on manual exit; bz#2120
   - djm@cvs.openbsd.org 2013/07/20 01:55:13
     [auth-krb5.c gss-serv-krb5.c gss-serv.c]
     fix kerberos/GSSAPI deprecation warnings and linking; "looks okay" millert@

20130718
 - (djm) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2013/06/10 19:19:44
     [readconf.c]
     revert 1.203 while we investigate crashes reported by okan@
   - guenther@cvs.openbsd.org 2013/06/17 04:48:42
     [scp.c]
     Handle time_t values as long long's when formatting them and when
     parsing them from remote servers.
     Improve error checking in parsing of 'T' lines.
     ok dtucker@ deraadt@
   - markus@cvs.openbsd.org 2013/06/20 19:15:06
     [krl.c]
     don't leak the rdata blob on errors; ok djm@
   - djm@cvs.openbsd.org 2013/06/21 00:34:49
     [auth-rsa.c auth.h auth2-hostbased.c auth2-pubkey.c monitor.c]
     for hostbased authentication, print the client host and user on
     the auth success/failure line; bz#2064, ok dtucker@
   - djm@cvs.openbsd.org 2013/06/21 00:37:49
     [ssh_config.5]
     explicitly mention that IdentitiesOnly can be used with IdentityFile
     to control which keys are offered from an agent.
   - djm@cvs.openbsd.org 2013/06/21 05:42:32
     [dh.c]
     sprinkle in some error() to explain moduli(5) parse failures
   - djm@cvs.openbsd.org 2013/06/21 05:43:10
     [scp.c]
     make this -Wsign-compare clean after time_t conversion
   - djm@cvs.openbsd.org 2013/06/22 06:31:57
     [scp.c]
     improved time_t overflow check suggested by guenther@
   - jmc@cvs.openbsd.org 2013/06/27 14:05:37
     [ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5]
     do not use Sx for sections outwith the man page - ingo informs me that
     stuff like html will render with broken links;
     issue reported by Eric S. Raymond, via djm
   - markus@cvs.openbsd.org 2013/07/02 12:31:43
     [dh.c]
     remove extra whitespace
   - djm@cvs.openbsd.org 2013/07/12 00:19:59
     [auth-options.c auth-rsa.c bufaux.c buffer.h channels.c hostfile.c]
     [hostfile.h mux.c packet.c packet.h roaming_common.c serverloop.c]
     fix pointer-signedness warnings from clang/llvm-3.3; "seems nice" deraadt@
   - djm@cvs.openbsd.org 2013/07/12 00:20:00
     [sftp.c ssh-keygen.c ssh-pkcs11.c]
     fix pointer-signedness warnings from clang/llvm-3.3; "seems nice" deraadt@
   - djm@cvs.openbsd.org 2013/07/12 00:43:50
     [misc.c]
     in ssh_gai_strerror() don't fallback to strerror for EAI_SYSTEM when
     errno == 0. Avoids confusing error message in some broken resolver
     cases. bz#2122 patch from plautrba AT redhat.com; ok dtucker
   - djm@cvs.openbsd.org 2013/07/12 05:42:03
     [ssh-keygen.c]
     do_print_resource_record() can never be called with a NULL filename, so
     don't attempt (and bungle) asking for one if it has not been specified
     bz#2127 ok dtucker@
   - djm@cvs.openbsd.org 2013/07/12 05:48:55
     [ssh.c]
     set TCP nodelay for connections started with -N; bz#2124 ok dtucker@
   - schwarze@cvs.openbsd.org 2013/07/16 00:07:52
     [scp.1 sftp-server.8 ssh-keyscan.1 ssh-keysign.8 ssh-pkcs11-helper.8]
     use .Mt for email addresses; from Jan Stary <hans at stare dot cz>; ok jmc@
   - djm@cvs.openbsd.org 2013/07/18 01:12:26
     [ssh.1]
     be more exact wrt perms for ~/.ssh/config; bz#2078

20130702
 - (dtucker) [contrib/cygwin/README contrib/cygwin/ssh-host-config
   contrib/cygwin/ssh-user-config] Modernizes and improve readability of
   the Cygwin README file (which hasn't been updated for ages), drop
   unsupported OSes from the ssh-host-config help text, and drop an
   unneeded option from ssh-user-config.  Patch from vinschen at redhat com.

20130610
 - (djm) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2013/06/07 15:37:52
     [channels.c channels.h clientloop.c]
     Add an "ABANDONED" channel state and use for mux sessions that are
     disconnected via the ~. escape sequence.  Channels in this state will
     be able to close if the server responds, but do not count as active channels.
     This means that if you ~. all of the mux clients when using ControlPersist
     on a broken network, the backgrounded mux master will exit when the
     Control Persist time expires rather than hanging around indefinitely.
     bz#1917, also reported and tested by tedu@.  ok djm@ markus@.
 - (dtucker) [Makefile.in configure.ac fixalgorithms] Remove unsupported
   algorithms (Ciphers, MACs and HostKeyAlgorithms) from man pages.
 - (dtucker) [myproposal.h] Do not advertise AES GSM ciphers if we don't have
   the required OpenSSL support.  Patch from naddy at freebsd.
 - (dtucker) [myproposal.h] Make the conditional algorithm support consistent
   and add some comments so it's clear what goes where.

20130605
 - (dtucker) [myproposal.h] Enable sha256 kex methods based on the presence of
   the necessary functions, not from the openssl version.
 - (dtucker) [contrib/ssh-copy-id] bz#2117: Use portable operator in test.
   Patch from cjwatson at debian.
 - (dtucker) [regress/forwarding.sh] For (as yet unknown) reason, the
   forwarding test is extremely slow copying data on some machines so switch
   back to copying the much smaller ls binary until we can figure out why
   this is.
 - (dtucker) [Makefile.in] append $CFLAGS to compiler options when building
   modpipe in case there's anything in there we need.
 - (dtucker) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2013/06/02 21:01:51
     [channels.h]
     typo in comment
   - dtucker@cvs.openbsd.org 2013/06/02 23:36:29
     [clientloop.h clientloop.c mux.c]
     No need for the mux cleanup callback to be visible so restore it to static
     and call it through the detach_user function pointer.  ok djm@
   - dtucker@cvs.openbsd.org 2013/06/03 00:03:18
     [mac.c]
     force the MAC output to be 64-bit aligned so umac won't see unaligned
     accesses on strict-alignment architectures.  bz#2101, patch from
     tomas.kuthan at oracle.com, ok djm@
   - dtucker@cvs.openbsd.org 2013/06/04 19:12:23
     [scp.c]
     use MAXPATHLEN for buffer size instead of fixed value.  ok markus
   - dtucker@cvs.openbsd.org 2013/06/04 20:42:36
     [sftp.c]
     Make sftp's libedit interface marginally multibyte aware by building up
     the quoted string by character instead of by byte.  Prevents failures
     when linked against a libedit built with wide character support (bz#1990).
     "looks ok" djm
   - dtucker@cvs.openbsd.org 2013/06/05 02:07:29
     [mux.c]
     fix leaks in mux error paths, from Zhenbo Xu, found by Melton. bz#1967,
     ok djm
   - dtucker@cvs.openbsd.org 2013/06/05 02:27:50
     [sshd.c]
     When running sshd -D, close stderr unless we have explicitly requesting
     logging to stderr. From james.hunt at ubuntu.com via bz#1976, djm's patch
     so, err, ok dtucker.
   - dtucker@cvs.openbsd.org 2013/06/05 12:52:38
     [sshconnect2.c]
     Fix memory leaks found by Zhenbo Xu and the Melton tool.  bz#1967, ok djm
   - dtucker@cvs.openbsd.org 2013/06/05 22:00:28
     [readconf.c]
     plug another memleak.  bz#1967, from Zhenbo Xu, detected by Melton, ok djm
 - (dtucker) [configure.ac sftp.c openbsd-compat/openbsd-compat.h] Cater for
    platforms that don't have multibyte character support (specifically,
    mblen).

20130602
 - (tim) [Makefile.in] Make Solaris, UnixWare, & OpenServer linkers happy
   linking regress/modpipe.
 - (dtucker) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2013/06/02 13:33:05
     [progressmeter.c]
     Add misc.h for monotime prototype. (ID sync only).
   - dtucker@cvs.openbsd.org 2013/06/02 13:35:58
     [ssh-agent.c]
     Make parent_alive_interval time_t to avoid signed/unsigned comparison
 - (dtucker) [configure.ac]  sys/un.h needs sys/socket.h on some platforms
   to prevent noise from configure. Patch from Nathan Osman. (bz#2114).
 - (dtucker) [configure.ac] bz#2111: don't try to use lastlog on Android.
   Patch from Nathan Osman.
 - (tim) [configure.ac regress/Makefile] With rev 1.47 of test-exec.sh we
   need a shell that can handle "[ file1 -nt file2 ]". Rather than keep
   dealing with shell portability issues in regression tests, we let
   configure find us a capable shell on those platforms with an old /bin/sh.
 - (tim) [aclocal.m4] Enhance OSSH_CHECK_CFLAG_COMPILE to check stderr.
   feedback and ok dtucker
 - (tim) [regress/sftp-chroot.sh] skip if no sudo. ok dtucker
 - (dtucker) [configure.ac] Some platforms need sys/types.h before sys/un.h.
 - (dtucker) [configure.ac] Some other platforms need sys/types.h before
   sys/socket.h.

20130601
 - (dtucker) [configure.ac openbsd-compat/xcrypt.c] bz#2112: fall back to
   using openssl's DES_crypt function on platorms that don't have a native
   one, eg Android.  Based on a patch from Nathan Osman.
 - (dtucker) [configure.ac defines.h] Test for fd_mask, howmany and NFDBITS
   rather than trying to enumerate the plaforms that don't have them.
   Based on a patch from Nathan Osman, with help from tim@.
 - (dtucker) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/05/17 00:13:13
     [xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
     ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
     gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
     auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
     servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
     auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
     sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
     kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
     kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
     monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
     ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
     sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
     ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
     dns.c packet.c readpass.c authfd.c moduli.c]
     bye, bye xfree(); ok markus@
   - djm@cvs.openbsd.org 2013/05/19 02:38:28
     [auth2-pubkey.c]
     fix failure to recognise cert-authority keys if a key of a different type
     appeared in authorized_keys before it; ok markus@
   - djm@cvs.openbsd.org 2013/05/19 02:42:42
     [auth.h auth.c key.c monitor.c auth-rsa.c auth2.c auth1.c key.h]
     Standardise logging of supplemental information during userauth. Keys
     and ruser is now logged in the auth success/failure message alongside
     the local username, remote host/port and protocol in use. Certificates
     contents and CA are logged too.
     Pushing all logging onto a single line simplifies log analysis as it is
     no longer necessary to relate information scattered across multiple log
     entries. "I like it" markus@
   - dtucker@cvs.openbsd.org 2013/05/31 12:28:10
     [ssh-agent.c]
     Use time_t where appropriate.  ok djm
   - dtucker@cvs.openbsd.org 2013/06/01 13:15:52
     [ssh-agent.c clientloop.c misc.h packet.c progressmeter.c misc.c
     channels.c sandbox-systrace.c]
     Use clock_gettime(CLOCK_MONOTONIC ...) for ssh timers so that things like
     keepalives and rekeying will work properly over clock steps.  Suggested by
     markus@, "looks good" djm@.
   - dtucker@cvs.openbsd.org 2013/06/01 20:59:25
     [scp.c sftp-client.c]
     Replace S_IWRITE, which isn't standardized, with S_IWUSR, which is.  Patch
     from Nathan Osman via bz#2085.  ok deraadt.
   - dtucker@cvs.openbsd.org 2013/06/01 22:34:50
     [sftp-client.c]
     Update progressmeter when data is acked, not when it's sent.  bz#2108, from
     Debian via Colin Watson, ok djm@
 - (dtucker) [M auth-chall.c auth-krb5.c auth-pam.c cipher-aes.c cipher-ctr.c
   groupaccess.c loginrec.c monitor.c monitor_wrap.c session.c sshd.c
   sshlogin.c uidswap.c openbsd-compat/bsd-cygwin_util.c
   openbsd-compat/getrrsetbyname-ldns.c openbsd-compat/port-aix.c
   openbsd-compat/port-linux.c] Replace portable-specific instances of xfree
   with the equivalent calls to free.
 - (dtucker) [configure.ac misc.c] Look for clock_gettime in librt and fall
   back to time(NULL) if we can't find it anywhere.
 - (dtucker) [sandbox-seccomp-filter.c] Allow clock_gettimeofday.

20130529
  - (dtucker) [configure.ac openbsd-compat/bsd-misc.h] bz#2087: Add a null
    implementation of endgrent for platforms that don't have it (eg Android).
    Loosely based on a patch from Nathan Osman, ok djm

 20130517
 - (dtucker) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/03/07 00:20:34
     [regress/proxy-connect.sh]
     repeat test with a style appended to the username
   - dtucker@cvs.openbsd.org 2013/03/23 11:09:43
     [regress/test-exec.sh]
     Only regenerate host keys if they don't exist or if ssh-keygen has changed
     since they were.  Reduces test runtime by 5-30% depending on machine
     speed.
   - dtucker@cvs.openbsd.org 2013/04/06 06:00:22
     [regress/rekey.sh regress/test-exec.sh regress/integrity.sh
     regress/multiplex.sh Makefile regress/cfgmatch.sh]
     Split the regress log into 3 parts: the debug output from ssh, the debug
     log from sshd and the output from the client command (ssh, scp or sftp).
     Somewhat functional now, will become more useful when ssh/sshd -E is added.
   - dtucker@cvs.openbsd.org 2013/04/07 02:16:03
     [regress/Makefile regress/rekey.sh regress/integrity.sh
     regress/sshd-log-wrapper.sh regress/forwarding.sh regress/test-exec.sh]
     use -E option for ssh and sshd to write debuging logs to ssh{,d}.log and
     save the output from any failing tests.  If a test fails the debug output
     from ssh and sshd for the failing tests (and only the failing tests) should
     be available in failed-ssh{,d}.log.
   - djm@cvs.openbsd.org 2013/04/18 02:46:12
     [regress/Makefile regress/sftp-chroot.sh]
     test sshd ChrootDirectory+internal-sftp; feedback & ok dtucker@
   - dtucker@cvs.openbsd.org 2013/04/22 07:23:08
     [regress/multiplex.sh]
     Write mux master logs to regress.log instead of ssh.log to keep separate
   - djm@cvs.openbsd.org 2013/05/10 03:46:14
     [regress/modpipe.c]
     sync some portability changes from portable OpenSSH (id sync only)
   - dtucker@cvs.openbsd.org 2013/05/16 02:10:35
     [regress/rekey.sh]
     Add test for time-based rekeying
   - dtucker@cvs.openbsd.org 2013/05/16 03:33:30
     [regress/rekey.sh]
     test rekeying when there's no data being transferred
   - dtucker@cvs.openbsd.org 2013/05/16 04:26:10
     [regress/rekey.sh]
     add server-side rekey test
   - dtucker@cvs.openbsd.org 2013/05/16 05:48:31
     [regress/rekey.sh]
     add tests for RekeyLimit parsing
   - dtucker@cvs.openbsd.org 2013/05/17 00:37:40
     [regress/agent.sh regress/keytype.sh regress/cfgmatch.sh
     regress/forcecommand.sh regress/proto-version.sh regress/test-exec.sh
     regress/cipher-speed.sh regress/cert-hostkey.sh regress/cert-userkey.sh
     regress/ssh-com.sh]
     replace 'echo -n' with 'printf' since it's more portable
     also remove "echon" hack.
   - dtucker@cvs.openbsd.org 2013/05/17 01:16:09
     [regress/agent-timeout.sh]
     Pull back some portability changes from -portable:
      - TIMEOUT is a read-only variable in some shells
      - not all greps have -q so redirect to /dev/null instead.
     (ID sync only)
   - dtucker@cvs.openbsd.org 2013/05/17 01:32:11
     [regress/integrity.sh]
     don't print output from ssh before getting it (it's available in ssh.log)
   - dtucker@cvs.openbsd.org 2013/05/17 04:29:14
     [regress/sftp.sh regress/putty-ciphers.sh regress/cipher-speed.sh
     regress/test-exec.sh regress/sftp-batch.sh regress/dynamic-forward.sh
     regress/putty-transfer.sh regress/conch-ciphers.sh regress/sftp-cmds.sh
     regress/scp.sh regress/ssh-com-sftp.sh regress/rekey.sh
     regress/putty-kex.sh regress/stderr-data.sh regress/stderr-after-eof.sh
     regress/sftp-badcmds.sh regress/reexec.sh regress/ssh-com-client.sh
     regress/sftp-chroot.sh regress/forwarding.sh regress/transfer.sh
     regress/multiplex.sh]
     Move the setting of DATA and COPY into test-exec.sh
   - dtucker@cvs.openbsd.org 2013/05/17 10:16:26
     [regress/try-ciphers.sh]
     use expr for math to keep diffs vs portable down
     (id sync only)
   - dtucker@cvs.openbsd.org 2013/05/17 10:23:52
     [regress/login-timeout.sh regress/reexec.sh regress/test-exec.sh]
     Use SUDO when cat'ing pid files and running the sshd log wrapper so that
     it works with a restrictive umask and the pid files are not world readable.
     Changes from -portable.  (id sync only)
   - dtucker@cvs.openbsd.org 2013/05/17 10:24:48
     [regress/localcommand.sh]
     use backticks for portability. (id sync only)
   - dtucker@cvs.openbsd.org 2013/05/17 10:26:26
     [regress/sftp-badcmds.sh]
     remove unused BATCH variable. (id sync only)
   - dtucker@cvs.openbsd.org 2013/05/17 10:28:11
     [regress/sftp.sh]
     only compare copied data if sftp succeeds.  from portable (id sync only)
   - dtucker@cvs.openbsd.org 2013/05/17 10:30:07
     [regress/test-exec.sh]
     wait a bit longer for startup and use case for absolute path.
     from portable (id sync only)
   - dtucker@cvs.openbsd.org 2013/05/17 10:33:09
     [regress/agent-getpeereid.sh]
     don't redirect stdout from sudo.  from portable (id sync only)
   - dtucker@cvs.openbsd.org 2013/05/17 10:34:30
     [regress/portnum.sh]
     use a more portable negated if structure.  from portable (id sync only)
   - dtucker@cvs.openbsd.org 2013/05/17 10:35:43
     [regress/scp.sh]
     use a file extention that's not special on some platforms.  from portable
     (id sync only)
 - (dtucker) [regress/bsd.regress.mk] Remove unused file.  We've never used it
   in portable and it's long gone in openbsd.
 - (dtucker) [regress/integrity.sh].  Force fixed Diffie-Hellman key exchange
   methods.  When the openssl version doesn't support ECDH then next one on
   the list is DH group exchange, but that causes a bit more traffic which can
   mean that the tests flip bits in the initial exchange rather than the MACed
   traffic and we get different errors to what the tests look for.
 - (dtucker) [openbsd-compat/getopt.h] Remove unneeded bits.
 - (dtucker) [regress/cfgmatch.sh] Resync config file setup with openbsd.
 - (dtucker) [regress/agent-getpeereid.sh] Resync spaces with openbsd.
 - (dtucker) [regress/integrity.sh regress/krl.sh regress/test-exec.sh]
   Move the jot helper function to portable-specific part of test-exec.sh.
 - (dtucker) [regress/test-exec.sh] Move the portable-specific functions
   together and add a couple of missing lines from openbsd.
 - (dtucker) [regress/stderr-after-eof.sh regress/test-exec.sh] Move the md5
   helper function to the portable part of test-exec.sh.
 - (dtucker) [regress/runtests.sh] Remove obsolete test driver script.
 - (dtucker) [regress/cfgmatch.sh] Remove unneeded sleep renderd obsolete by
   rev 1.6 which calls wait.

20130516
 - (djm) [contrib/ssh-copy-id] Fix bug that could cause "rm *" to be 
    executed if mktemp failed; bz#2105 ok dtucker@
 - (dtucker) OpenBSD CVS Sync
   - tedu@cvs.openbsd.org 2013/04/23 17:49:45
     [misc.c]
     use xasprintf instead of a series of strlcats and strdup. ok djm
   - tedu@cvs.openbsd.org 2013/04/24 16:01:46
     [misc.c]
     remove extra parens noticed by nicm
   - dtucker@cvs.openbsd.org 2013/05/06 07:35:12
     [sftp-server.8]
     Reference the version of the sftp draft we actually implement.  ok djm@
   - djm@cvs.openbsd.org 2013/05/10 03:40:07
     [sshconnect2.c]
     fix bzero(ptr_to_struct, sizeof(ptr_to_struct)); bz#2100 from
     Colin Watson
   - djm@cvs.openbsd.org 2013/05/10 04:08:01
     [key.c]
     memleak in cert_free(), wasn't actually freeing the struct;
     bz#2096 from shm AT digitalsun.pl
   - dtucker@cvs.openbsd.org 2013/05/10 10:13:50
     [ssh-pkcs11-helper.c]
     remove unused extern optarg.  ok markus@
   - dtucker@cvs.openbsd.org 2013/05/16 02:00:34
     [ssh_config sshconnect2.c packet.c readconf.h readconf.c clientloop.c
     ssh_config.5 packet.h]
     Add an optional second argument to RekeyLimit in the client to allow
     rekeying based on elapsed time in addition to amount of traffic.
     with djm@ jmc@, ok djm
   - dtucker@cvs.openbsd.org 2013/05/16 04:09:14
     [sshd_config.5 servconf.c servconf.h packet.c serverloop.c monitor.c sshd_config
     sshd.c] Add RekeyLimit to sshd with the same syntax as the client allowing
     rekeying based on traffic volume or time.  ok djm@, help & ok jmc@ for the man
     page.
   - djm@cvs.openbsd.org 2013/05/16 04:27:50
     [ssh_config.5 readconf.h readconf.c]
     add the ability to ignore specific unrecognised ssh_config options;
     bz#866; ok markus@
   - jmc@cvs.openbsd.org 2013/05/16 06:28:45
     [ssh_config.5]
     put IgnoreUnknown in the right place;
   - jmc@cvs.openbsd.org 2013/05/16 06:30:06
     [sshd_config.5]
     oops! avoid Xr to self;
   - dtucker@cvs.openbsd.org 2013/05/16 09:08:41
     [log.c scp.c sshd.c serverloop.c schnorr.c sftp.c]
     Fix some "unused result" warnings found via clang and -portable.
     ok markus@
   - dtucker@cvs.openbsd.org 2013/05/16 09:12:31
     [readconf.c servconf.c]
     switch RekeyLimit traffic volume parsing to scan_scaled.  ok djm@
   - dtucker@cvs.openbsd.org 2013/05/16 10:43:34
     [servconf.c readconf.c]
     remove now-unused variables
   - dtucker@cvs.openbsd.org 2013/05/16 10:44:06
     [servconf.c]
     remove another now-unused variable
 - (dtucker) [configure.ac readconf.c servconf.c
     openbsd-compat/openbsd-compat.h] Add compat bits for scan_scaled.

20130510
 - (dtucker) [configure.ac] Enable -Wsizeof-pointer-memaccess if the compiler
   supports it.  Mentioned by Colin Watson in bz#2100, ok djm.
 - (dtucker) [openbsd-compat/getopt.c] Factor out portibility changes to
   getopt.c.  Preprocessed source is identical other than line numbers.
 - (dtucker) [openbsd-compat/getopt_long.c] Import from OpenBSD.  No
   portability changes yet.
 - (dtucker) [openbsd-compat/Makefile.in openbsd-compat/getopt.c
   openbsd-compat/getopt_long.c regress/modpipe.c] Remove getopt.c, add
   portability code to getopt_long.c and switch over Makefile and the ugly
   hack in modpipe.c.  Fixes bz#1448.
 - (dtucker) [openbsd-compat/getopt.h openbsd-compat/getopt_long.c
   openbsd-compat/openbsd-compat.h] pull in getopt.h from openbsd and plumb
   in to use it when we're using our own getopt.
 - (dtucker) [kex.c] Only include sha256 and ECC key exchange methods when the
   underlying libraries support them.
 - (dtucker) [configure.ac] Add -Werror to the -Qunused-arguments test so
   we don't get a warning on compilers that *don't* support it.  Add
   -Wno-unknown-warning-option.  Move both to the start of the list for
   maximum noise suppression.  Tested with gcc 4.6.3, gcc 2.95.4 and clang 2.9.

20130423
 - (djm) [auth.c configure.ac misc.c monitor.c monitor_wrap.c] Support
   platforms, such as Android, that lack struct passwd.pw_gecos. Report
   and initial patch from Nathan Osman bz#2086; feedback tim@ ok dtucker@
 - (djm) OpenBSD CVS Sync
   - markus@cvs.openbsd.org 2013/03/05 20:16:09
     [sshconnect2.c]
     reset pubkey order on partial success; ok djm@
   - djm@cvs.openbsd.org 2013/03/06 23:35:23
     [session.c]
     fatal() when ChrootDirectory specified by running without root privileges;
     ok markus@
   - djm@cvs.openbsd.org 2013/03/06 23:36:53
     [readconf.c]
     g/c unused variable (-Wunused)
   - djm@cvs.openbsd.org 2013/03/07 00:19:59
     [auth2-pubkey.c monitor.c]
     reconstruct the original username that was sent by the client, which may
     have included a style (e.g. "root:skey") when checking public key
     signatures. Fixes public key and hostbased auth when the client specified
     a style; ok markus@
   - markus@cvs.openbsd.org 2013/03/07 19:27:25
     [auth.h auth2-chall.c auth2.c monitor.c sshd_config.5]
     add submethod support to AuthenticationMethods; ok and freedback djm@
   - djm@cvs.openbsd.org 2013/03/08 06:32:58
     [ssh.c]
     allow "ssh -f none ..." ok markus@
   - djm@cvs.openbsd.org 2013/04/05 00:14:00
     [auth2-gss.c krl.c sshconnect2.c]
     hush some {unused, printf type} warnings
   - djm@cvs.openbsd.org 2013/04/05 00:31:49
     [pathnames.h]
     use the existing _PATH_SSH_USER_RC define to construct the other
     pathnames; bz#2077, ok dtucker@ (no binary change)
   - djm@cvs.openbsd.org 2013/04/05 00:58:51
     [mux.c]
     cleanup mux-created channels that are in SSH_CHANNEL_OPENING state too
     (in addition to ones already in OPEN); bz#2079, ok dtucker@
   - markus@cvs.openbsd.org 2013/04/06 16:07:00
     [channels.c sshd.c]
     handle ECONNABORTED for accept(); ok deraadt some time ago...
   - dtucker@cvs.openbsd.org 2013/04/07 02:10:33
     [log.c log.h ssh.1 ssh.c sshd.8 sshd.c]
     Add -E option to ssh and sshd to append debugging logs to a specified file
     instead of stderr or syslog.  ok markus@, man page help jmc@
   - dtucker@cvs.openbsd.org 2013/04/07 09:40:27
     [sshd.8]
     clarify -e text. suggested by & ok jmc@
   - djm@cvs.openbsd.org 2013/04/11 02:27:50
     [packet.c]
     quiet disconnect notifications on the server from error() back to logit()
     if it is a normal client closure; bz#2057 ok+feedback dtucker@
   - dtucker@cvs.openbsd.org 2013/04/17 09:04:09
     [session.c]
     revert rev 1.262; it fails because uid is already set here.  ok djm@
   - djm@cvs.openbsd.org 2013/04/18 02:16:07
     [sftp.c]
     make "sftp -q" do what it says on the sticker: hush everything but errors;
     ok dtucker@
   - djm@cvs.openbsd.org 2013/04/19 01:00:10
     [sshd_config.5]
     document the requirment that the AuthorizedKeysCommand be owned by root;
     ok dtucker@ markus@
   - djm@cvs.openbsd.org 2013/04/19 01:01:00
     [ssh-keygen.c]
     fix some memory leaks; bz#2088 ok dtucker@
   - djm@cvs.openbsd.org 2013/04/19 01:03:01
     [session.c]
     reintroduce 1.262 without the connection-killing bug:
     fatal() when ChrootDirectory specified by running without root privileges;
     ok markus@
   - djm@cvs.openbsd.org 2013/04/19 01:06:50
     [authfile.c cipher.c cipher.h kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c]
     [key.c key.h mac.c mac.h packet.c ssh.1 ssh.c]
     add the ability to query supported ciphers, MACs, key type and KEX
     algorithms to ssh. Includes some refactoring of KEX and key type handling
     to be table-driven; ok markus@
   - djm@cvs.openbsd.org 2013/04/19 11:10:18
     [ssh.c]
     add -Q to usage; reminded by jmc@
   - djm@cvs.openbsd.org 2013/04/19 12:07:08
     [kex.c]
     remove duplicated list entry pointed out by naddy@
   - dtucker@cvs.openbsd.org 2013/04/22 01:17:18
     [mux.c]
     typo in debug output: evitval->exitval

20130418
 - (djm) [config.guess config.sub] Update to last versions before they switch
   to GPL3. ok dtucker@
 - (dtucker) [configure.ac] Use -Qunused-arguments to suppress warnings from
   unused argument warnings (in particular, -fno-builtin-memset) from clang.

20130404
 - (dtucker) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2013/02/17 23:16:57
     [readconf.c ssh.c readconf.h sshconnect2.c]
     Keep track of which IndentityFile options were manually supplied and which
     were default options, and don't warn if the latter are missing.
     ok markus@
   - dtucker@cvs.openbsd.org 2013/02/19 02:12:47
     [krl.c]
     Remove bogus include.  ok djm
   - dtucker@cvs.openbsd.org 2013/02/22 04:45:09
     [ssh.c readconf.c readconf.h]
     Don't complain if IdentityFiles specified in system-wide configs are
     missing.  ok djm, deraadt.
   - markus@cvs.openbsd.org 2013/02/22 19:13:56
     [sshconnect.c]
     support ProxyCommand=- (stdin/out already point to the proxy); ok djm@
   - djm@cvs.openbsd.org 2013/02/22 22:09:01
     [ssh.c]
     Allow IdenityFile=none; ok markus deraadt (and dtucker for an earlier
     version)

20130401
 - (dtucker) [openbsd-compat/bsd-cygwin_util.{c,h}] Don't include windows.h
   to avoid conflicting definitions of __int64, adding the required bits.
   Patch from Corinna Vinschen.

20130323
 - (tim) [Makefile.in] remove some duplication introduced in 20130220 commit.

20130322
 - (djm) [contrib/ssh-copy-id contrib/ssh-copy-id.1] Updated to Phil
   Hands' greatly revised version.
 - (djm) Release 6.2p1
 - (dtucker) [configure.ac] Add stdlib.h to zlib check for exit() prototype.
 - (dtucker) [includes.h] Check if _GNU_SOURCE is already defined before
   defining it again.  Prevents warnings if someone, eg, sets it in CFLAGS.

20130318
 - (djm) [configure.ac log.c scp.c sshconnect2.c openbsd-compat/vis.c]
   [openbsd-compat/vis.h] FreeBSD's strnvis isn't compatible with OpenBSD's
   so mark it as broken. Patch from des AT des.no

20130317
 - (tim) [configure.ac] OpenServer 5 wants lastlog even though it has none
   of the bits the configure test looks for.

20130316
 - (djm) [configure.ac] Disable utmp, wtmp and/or lastlog if the platform
   is unable to successfully compile them. Based on patch from des AT
   des.no
 - (djm) [configure.ac openbsd-compat/bsd-misc.c openbsd-compat/bsd-misc.h]
   Add a usleep replacement for platforms that lack it; ok dtucker
 - (djm) [session.c] FreeBSD needs setusercontext(..., LOGIN_SETUMASK) to
   occur after UID switch; patch from John Marshall via des AT des.no;
   ok dtucker@

20130312
 - (dtucker) [regress/Makefile regress/cipher-speed.sh regress/test-exec.sh]
   Improve portability of cipher-speed test, based mostly on a patch from
   Iain Morgan.
 - (dtucker) [auth.c configure.ac platform.c platform.h] Accept uid 2 ("bin")
   in addition to root as an owner of system directories on AIX and HP-UX.
   ok djm@

20130307
 - (dtucker) [INSTALL] Bump documented autoconf version to what we're
   currently using.
 - (dtucker) [defines.h] Remove SIZEOF_CHAR bits since the test for it
   was removed in configure.ac rev 1.481 as it was redundant.
 - (tim) [Makefile.in] Add another missing $(EXEEXT) I should have seen 3 days
   ago.
 - (djm) [configure.ac] Add a timeout to the select/rlimit test to give it a
   chance to complete on broken systems; ok dtucker@

20130306
 - (dtucker) [regress/forward-control.sh] Wait longer for the forwarding
  connection to start so that the test works on slower machines.
 - (dtucker) [configure.ac] test that we can set number of file descriptors
   to zero with setrlimit before enabling the rlimit sandbox.  This affects
   (at least) HPUX 11.11.

20130305
 - (djm) [regress/modpipe.c] Compilation fix for AIX and parsing fix for
   HP/UX. Spotted by Kevin Brott
 - (dtucker) [configure.ac] use "=" for shell test and not "==".  Spotted by
   Amit Kulkarni and Kevin Brott.
 - (dtucker) [Makefile.in] Remove trailing "\" on PATHS, which caused obscure
   build breakage on (at least) HP-UX 11.11.  Found by Amit Kulkarni and Kevin
   Brott.
 - (tim) [Makefile.in] Add missing $(EXEEXT). Found by Roumen Petrov.

20130227
 - (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
   [contrib/suse/openssh.spec] Crank version numbers
 - (tim) [regress/forward-control.sh] use sh in case login shell is csh.
 - (tim) [regress/integrity.sh] shell portability fix.
 - (tim) [regress/integrity.sh] keep old solaris awk from hanging.
 - (tim) [regress/krl.sh] keep old solaris awk from hanging.

20130226
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/02/20 08:27:50
     [integrity.sh]
     Add an option to modpipe that warns if the modification offset it not
     reached in it's stream and turn it on for t-integrity. This should catch
     cases where the session is not fuzzed for being too short (cf. my last
     "oops" commit)
 - (djm) [regress/integrity.sh] Run sshd via $SUDO; fixes tinderbox breakage
   for UsePAM=yes configuration

20130225
 - (dtucker) [configure.ac ssh-gss.h] bz#2073: additional #includes needed
   to use Solaris native GSS libs.  Patch from Pierre Ossman.

20130223
 - (djm) [configure.ac includes.h loginrec.c mux.c sftp.c] Prefer
   bsd/libutil.h to libutil.h to avoid deprecation warnings on Ubuntu.
   ok tim

20130222
 - (dtucker) [Makefile.in configure.ac] bz#2072: don't link krb5 libs to
   ssh(1) since they're not needed.  Patch from Pierre Ossman, ok djm.
 - (dtucker) [configure.ac] bz#2073: look for Solaris' differently-named
   libgss too.  Patch from Pierre Ossman, ok djm.
 - (djm) [configure.ac sandbox-seccomp-filter.c] Support for Linux
   seccomp-bpf sandbox on ARM. Patch from shawnlandden AT gmail.com;
   ok dtucker

20130221
 - (tim) [regress/forward-control.sh] shell portability fix.

20130220
 - (tim) [regress/cipher-speed.sh regress/try-ciphers.sh] shell portability fix.
 - (tim) [krl.c Makefile.in regress/Makefile regress/modpipe.c] remove unneeded
   err.h include from krl.c. Additional portability fixes for modpipe. OK djm
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/02/20 08:27:50
     [regress/integrity.sh regress/modpipe.c]
     Add an option to modpipe that warns if the modification offset it not
     reached in it's stream and turn it on for t-integrity. This should catch
     cases where the session is not fuzzed for being too short (cf. my last
     "oops" commit)
   - djm@cvs.openbsd.org 2013/02/20 08:29:27
     [regress/modpipe.c]
     s/Id/OpenBSD/ in RCS tag

20130219
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/02/18 22:26:47
     [integrity.sh]
     crank the offset yet again; it was still fuzzing KEX one of Darren's
     portable test hosts at 2800
   - djm@cvs.openbsd.org 2013/02/19 02:14:09
     [integrity.sh]
     oops, forgot to increase the output of the ssh command to ensure that
     we actually reach $offset
 - (djm) [regress/integrity.sh] Skip SHA2-based MACs on configurations that
   lack support for SHA2.
 - (djm) [regress/modpipe.c] Add local err, and errx functions for platforms
   that do not have them.

20130217
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/02/17 23:16:55
     [integrity.sh]
     make the ssh command generates some output to ensure that there are at
     least offset+tries bytes in the stream.

20130216
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/02/16 06:08:45
     [integrity.sh]
     make sure the fuzz offset is actually past the end of KEX for all KEX
     types. diffie-hellman-group-exchange-sha256 requires an offset around
     2700. Noticed via test failures in portable OpenSSH on platforms that
     lack ECC and this the more byte-frugal ECDH KEX algorithms.

20130215
 - (djm) [contrib/suse/rc.sshd] Use SSHD_BIN consistently; bz#2056 from
   Iain Morgan
 - (dtucker) [configure.ac openbsd-compat/bsd-misc.c openbsd-compat/bsd-misc.h]
   Use getpgrp() if we don't have getpgid() (old BSDs, maybe others).
 - (dtucker) [configure.ac openbsd-compat/Makefile.in openbsd-compat/strtoull.c
   openbsd-compat/openbsd-compat.h] Add strtoull to compat library for
   platforms that don't have it.
 - (dtucker) [openbsd-compat/openbsd-compat.h] Add prototype for strtoul,
   group strto* function prototypes together.
 - (dtucker) [openbsd-compat/bsd-misc.c] Handle the case where setpgrp() takes
   an argument.  Pointed out by djm.
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/02/14 21:35:59
     [auth2-pubkey.c]
     Correct error message that had a typo and was logging the wrong thing;
     patch from Petr Lautrbach
   - dtucker@cvs.openbsd.org 2013/02/15 00:21:01
     [sshconnect2.c]
     Warn more loudly if an IdentityFile provided by the user cannot be read.
     bz #1981, ok djm@

20130214
 - (djm) [regress/krl.sh] Don't use ecdsa keys in environment that lack ECC.
 - (djm) [regress/krl.sh] typo; found by Iain Morgan
 - (djm) [regress/integrity.sh] Start fuzzing from offset 2500 (instead
   of 2300) to avoid clobbering the end of (non-MAC'd) KEX. Verified by
   Iain Morgan

20130212
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/01/24 21:45:37
     [krl.c]
     fix handling of (unused) KRL signatures; skip string in correct buffer
   - djm@cvs.openbsd.org 2013/01/24 22:08:56
     [krl.c]
     skip serial lookup when cert's serial number is zero
   - krw@cvs.openbsd.org 2013/01/25 05:00:27
     [krl.c]
     Revert last. Breaks due to likely typo. Let djm@ fix later.
     ok djm@ via dlg@
   - djm@cvs.openbsd.org 2013/01/25 10:22:19
     [krl.c]
     redo last commit without the vi-vomit that snuck in:
     skip serial lookup when cert's serial number is zero
     (now with 100% better comment)
   - djm@cvs.openbsd.org 2013/01/26 06:11:05
     [Makefile.in acss.c acss.h cipher-acss.c cipher.c]
     [openbsd-compat/openssl-compat.h]
     remove ACSS, now that it is gone from libcrypto too
   - djm@cvs.openbsd.org 2013/01/27 10:06:12
     [krl.c]
     actually use the xrealloc() return value; spotted by xi.wang AT gmail.com
   - dtucker@cvs.openbsd.org 2013/02/06 00:20:42
     [servconf.c sshd_config sshd_config.5]
     Change default of MaxStartups to 10:30:100 to start doing random early
     drop at 10 connections up to 100 connections.  This will make it harder
     to DoS as CPUs have come a long way since the original value was set
     back in 2000.  Prompted by nion at debian org, ok markus@
   - dtucker@cvs.openbsd.org 2013/02/06 00:22:21
     [auth.c]
     Fix comment, from jfree.e1 at gmail
   - djm@cvs.openbsd.org 2013/02/08 00:41:12
     [sftp.c]
     fix NULL deref when built without libedit and control characters
     entered as command; debugging and patch from Iain Morgan an
     Loganaden Velvindron in bz#1956
   - markus@cvs.openbsd.org 2013/02/10 21:19:34
     [version.h]
     openssh 6.2
   - djm@cvs.openbsd.org 2013/02/10 23:32:10
     [ssh-keygen.c]
     append to moduli file when screening candidates rather than overwriting.
     allows resumption of interrupted screen; patch from Christophe Garault
     in bz#1957; ok dtucker@
   - djm@cvs.openbsd.org 2013/02/10 23:35:24
     [packet.c]
     record "Received disconnect" messages at ERROR rather than INFO priority,
     since they are abnormal and result in a non-zero ssh exit status; patch
     from Iain Morgan in bz#2057; ok dtucker@
   - dtucker@cvs.openbsd.org 2013/02/11 21:21:58
     [sshd.c]
     Add openssl version to debug output similar to the client.  ok markus@
   - djm@cvs.openbsd.org 2013/02/11 23:58:51
     [regress/try-ciphers.sh]
     remove acss here too
 - (djm) [regress/try-ciphers.sh] clean up CVS merge botch

20130211
 - (djm) [configure.ac openbsd-compat/openssl-compat.h] Repair build on old
   libcrypto that lacks EVP_CIPHER_CTX_ctrl

20130208
 - (djm) [contrib/redhat/sshd.init] treat RETVAL as an integer;
   patch from Iain Morgan in bz#2059
 - (dtucker) [configure.ac openbsd-compat/sys-tree.h] Test if compiler allows
   __attribute__ on return values and work around if necessary.  ok djm@

20130207
 - (djm) [configure.ac] Don't probe seccomp capability of running kernel
   at configure time; the seccomp sandbox will fall back to rlimit at
   runtime anyway. Patch from plautrba AT redhat.com in bz#2011

20130120
 - (djm) [cipher-aes.c cipher-ctr.c openbsd-compat/openssl-compat.h]
   Move prototypes for replacement ciphers to openssl-compat.h; fix EVP
   prototypes for openssl-1.0.0-fips.
 - (djm) OpenBSD CVS Sync
   - jmc@cvs.openbsd.org 2013/01/18 07:57:47
     [ssh-keygen.1]
     tweak previous;
   - jmc@cvs.openbsd.org 2013/01/18 07:59:46
     [ssh-keygen.c]
     -u before -V in usage();
   - jmc@cvs.openbsd.org 2013/01/18 08:00:49
     [sshd_config.5]
     tweak previous;
   - jmc@cvs.openbsd.org 2013/01/18 08:39:04
     [ssh-keygen.1]
     add -Q to the options list; ok djm
   - jmc@cvs.openbsd.org 2013/01/18 21:48:43
     [ssh-keygen.1]
     command-line (adj.) -> command line (n.);
   - jmc@cvs.openbsd.org 2013/01/19 07:13:25
     [ssh-keygen.1]
     fix some formatting; ok djm
   - markus@cvs.openbsd.org 2013/01/19 12:34:55
     [krl.c]
     RB_INSERT does not remove existing elments; ok djm@
 - (djm) [openbsd-compat/sys-tree.h] Sync with OpenBSD. krl.c needs newer
   version.
 - (djm) [regress/krl.sh] replacement for jot; most platforms lack it

20130118
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/01/17 23:00:01
     [auth.c key.c key.h ssh-keygen.1 ssh-keygen.c sshd_config.5]
     [krl.c krl.h PROTOCOL.krl]
     add support for Key Revocation Lists (KRLs). These are a compact way to
     represent lists of revoked keys and certificates, taking as little as
     a single bit of incremental cost to revoke a certificate by serial number.
     KRLs are loaded via the existing RevokedKeys sshd_config option.
     feedback and ok markus@
   - djm@cvs.openbsd.org 2013/01/18 00:45:29
     [regress/Makefile regress/cert-userkey.sh regress/krl.sh]
     Tests for Key Revocation Lists (KRLs)
   - djm@cvs.openbsd.org 2013/01/18 03:00:32
     [krl.c]
     fix KRL generation bug for list sections

20130117
 - (djm) [regress/cipher-speed.sh regress/integrity.sh regress/try-ciphers.sh]
   check for GCM support before testing GCM ciphers.

20130112
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2013/01/12 11:22:04
     [cipher.c]
     improve error message for integrity failure in AES-GCM modes; ok markus@
   - djm@cvs.openbsd.org 2013/01/12 11:23:53
     [regress/cipher-speed.sh regress/integrity.sh regress/try-ciphers.sh]
     test AES-GCM modes; feedback markus@
 - (djm) [regress/integrity.sh] repair botched merge

20130109
 - (djm) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2012/12/14 05:26:43
     [auth.c]
     use correct string in error message; from rustybsd at gmx.fr
   - djm@cvs.openbsd.org 2013/01/02 00:32:07
     [clientloop.c mux.c]
     channel_setup_local_fwd_listener() returns 0 on failure, not -ve
     bz#2055 reported by mathieu.lacage AT gmail.com
   - djm@cvs.openbsd.org 2013/01/02 00:33:49
     [PROTOCOL.agent]
     correct format description for SSH_AGENTC_ADD_RSA_ID_CONSTRAINED
     bz#2051 from david AT lechnology.com
   - djm@cvs.openbsd.org 2013/01/03 05:49:36
     [servconf.h]
     add a couple of ServerOptions members that should be copied to the privsep
     child (for consistency, in this case they happen only to be accessed in
     the monitor); ok dtucker@
   - djm@cvs.openbsd.org 2013/01/03 12:49:01
     [PROTOCOL]
     fix description of MAC calculation for EtM modes; ok markus@
   - djm@cvs.openbsd.org 2013/01/03 12:54:49
     [sftp-server.8 sftp-server.c]
     allow specification of an alternate start directory for sftp-server(8)
     "I like this" markus@
   - djm@cvs.openbsd.org 2013/01/03 23:22:58
     [ssh-keygen.c]
     allow fingerprinting of keys hosted in PKCS#11 tokens: ssh-keygen -lD ...
     ok markus@
   - jmc@cvs.openbsd.org 2013/01/04 19:26:38
     [sftp-server.8 sftp-server.c]
     sftp-server.8: add argument name to -d
     sftp-server.c: add -d to usage()
     ok djm
   - markus@cvs.openbsd.org 2013/01/08 18:49:04
     [PROTOCOL authfile.c cipher.c cipher.h kex.c kex.h monitor_wrap.c]
     [myproposal.h packet.c ssh_config.5 sshd_config.5]
     support AES-GCM as defined in RFC 5647 (but with simpler KEX handling)
     ok and feedback djm@
   - djm@cvs.openbsd.org 2013/01/09 05:40:17
     [ssh-keygen.c]
     correctly initialise fingerprint type for fingerprinting PKCS#11 keys
 - (djm) [cipher.c configure.ac openbsd-compat/openssl-compat.h]
   Fix merge botch, automatically detect AES-GCM in OpenSSL, move a little
   cipher compat code to openssl-compat.h

20121217
 - (dtucker) [Makefile.in] Add some scaffolding so that the new regress
   tests will work with VPATH directories.

20121213
 - (djm) OpenBSD CVS Sync
   - markus@cvs.openbsd.org 2012/12/12 16:45:52
     [packet.c]
     reset incoming_packet buffer for each new packet in EtM-case, too;
     this happens if packets are parsed only parially (e.g. ignore
     messages sent when su/sudo turn off echo); noted by sthen/millert
   - naddy@cvs.openbsd.org 2012/12/12 16:46:10
     [cipher.c]
     use OpenSSL's EVP_aes_{128,192,256}_ctr() API and remove our hand-rolled
     counter mode code; ok djm@
 - (djm) [configure.ac cipher-ctr.c] Adapt EVP AES CTR change to retain our
   compat code for older OpenSSL
 - (djm) [cipher.c] Fix missing prototype for compat code

20121212
 - (djm) OpenBSD CVS Sync
   - markus@cvs.openbsd.org 2012/12/11 22:16:21
     [monitor.c]
     drain the log messages after receiving the keystate from the unpriv
     child. otherwise it might block while sending. ok djm@
   - markus@cvs.openbsd.org 2012/12/11 22:31:18
     [PROTOCOL authfile.c cipher.c cipher.h kex.h mac.c myproposal.h]
     [packet.c ssh_config.5 sshd_config.5]
     add encrypt-then-mac (EtM) modes to openssh by defining new mac algorithms
     that change the packet format and compute the MAC over the encrypted
     message (including the packet size) instead of the plaintext data;
     these EtM modes are considered more secure and used by default.
     feedback and ok djm@
   - sthen@cvs.openbsd.org 2012/12/11 22:51:45
     [mac.c]
     fix typo, s/tem/etm in hmac-ripemd160-tem. ok markus@
   - markus@cvs.openbsd.org 2012/12/11 22:32:56
     [regress/try-ciphers.sh]
     add etm modes
   - markus@cvs.openbsd.org 2012/12/11 22:42:11
     [regress/Makefile regress/modpipe.c regress/integrity.sh]
     test the integrity of the packets; with djm@
   - markus@cvs.openbsd.org 2012/12/11 23:12:13
     [try-ciphers.sh]
     add hmac-ripemd160-etm@openssh.com
 - (djm) [mac.c] fix merge botch
 - (djm) [regress/Makefile regress/integrity.sh] Make the integrity.sh test
   work on platforms without 'jot'
 - (djm) [regress/integrity.sh] Fix awk quoting, packet length skip
 - (djm) [regress/Makefile] fix t-exec rule

20121207
 - (dtucker) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2012/12/06 06:06:54
     [regress/keys-command.sh]
     Fix some problems with the keys-command test:
      - use string comparison rather than numeric comparison
      - check for existing KEY_COMMAND file and don't clobber if it exists
      - clean up KEY_COMMAND file if we do create it.
      - check that KEY_COMMAND is executable (which it won't be if eg /var/run
        is mounted noexec).
     ok djm.
   - jmc@cvs.openbsd.org 2012/12/03 08:33:03
     [ssh-add.1 sshd_config.5]
     tweak previous;
   - markus@cvs.openbsd.org 2012/12/05 15:42:52
     [ssh-add.c]
     prevent double-free of comment; ok djm@
   - dtucker@cvs.openbsd.org 2012/12/07 01:51:35
     [serverloop.c]
     Cast signal to int for logging.  A no-op on openbsd (they're always ints)
     but will prevent warnings in portable.  ok djm@

20121205
 - (tim) [defines.h] Some platforms are missing ULLONG_MAX. Feedback djm@.

20121203
 - (djm) [openbsd-compat/sys-queue.h] Sync with OpenBSD to get
   TAILQ_FOREACH_SAFE needed for upcoming changes.
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2012/12/02 20:26:11
     [ssh_config.5 sshconnect2.c]
     Make IdentitiesOnly apply to keys obtained from a PKCS11Provider.
     This allows control of which keys are offered from tokens using
     IdentityFile. ok markus@
   - djm@cvs.openbsd.org 2012/12/02 20:42:15
     [ssh-add.1 ssh-add.c]
     make deleting explicit keys "ssh-add -d" symmetric with adding keys -
     try to delete the corresponding certificate too and respect the -k option
     to allow deleting of the key only; feedback and ok markus@
   - djm@cvs.openbsd.org 2012/12/02 20:46:11
     [auth-options.c channels.c servconf.c servconf.h serverloop.c session.c]
     [sshd_config.5]
     make AllowTcpForwarding accept "local" and "remote" in addition to its
     current "yes"/"no" to allow the server to specify whether just local or
     remote TCP forwarding is enabled. ok markus@
   - dtucker@cvs.openbsd.org 2012/10/05 02:20:48
     [regress/cipher-speed.sh regress/try-ciphers.sh]
     Add umac-128@openssh.com to the list of MACs to be tested
   - djm@cvs.openbsd.org 2012/10/19 05:10:42
     [regress/cert-userkey.sh]
     include a serial number when generating certs
   - djm@cvs.openbsd.org 2012/11/22 22:49:30
     [regress/Makefile regress/keys-command.sh]
     regress for AuthorizedKeysCommand; hints from markus@
   - djm@cvs.openbsd.org 2012/12/02 20:47:48
     [Makefile regress/forward-control.sh]
     regress for AllowTcpForwarding local/remote; ok markus@
   - djm@cvs.openbsd.org 2012/12/03 00:14:06
     [auth2-chall.c ssh-keygen.c]
     Fix compilation with -Wall -Werror (trivial type fixes)
 - (djm) [configure.ac] Turn on -g for gcc compilers. Helps pre-installation
   debugging. ok dtucker@
 - (djm) [configure.ac] Revert previous. configure.ac already does this
   for us.

20121114
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2012/11/14 02:24:27
     [auth2-pubkey.c]
     fix username passed to helper program
     prepare stdio fds before closefrom()
     spotted by landry@
   - djm@cvs.openbsd.org 2012/11/14 02:32:15
     [ssh-keygen.c]
     allow the full range of unsigned serial numbers; 'fine' deraadt@
   - djm@cvs.openbsd.org 2012/12/02 20:34:10
     [auth.c auth.h auth1.c auth2-chall.c auth2-gss.c auth2-jpake.c auth2.c]
     [monitor.c monitor.h]
     Fixes logging of partial authentication when privsep is enabled
     Previously, we recorded "Failed xxx" since we reset authenticated before
     calling auth_log() in auth2.c. This adds an explcit "Partial" state.
     
     Add a "submethod" to auth_log() to report which submethod is used
     for keyboard-interactive.
     
     Fix multiple authentication when one of the methods is
     keyboard-interactive.
     
     ok markus@
   - dtucker@cvs.openbsd.org 2012/10/05 02:05:30
     [regress/multiplex.sh]
     Use 'kill -0' to test for the presence of a pid since it's more portable

20121107
 - (djm) OpenBSD CVS Sync
   - eric@cvs.openbsd.org 2011/11/28 08:46:27
     [moduli.5]
     fix formula
     ok djm@
   - jmc@cvs.openbsd.org 2012/09/26 17:34:38
     [moduli.5]
     last stage of rfc changes, using consistent Rs/Re blocks, and moving the
     references into a STANDARDS section;

20121105
 - (dtucker) [uidswap.c openbsd-compat/Makefile.in
   openbsd-compat/bsd-setres_id.c openbsd-compat/bsd-setres_id.h
   openbsd-compat/openbsd-compat.h]  Move the fallback code for setting uids
   and gids from uidswap.c to the compat library, which allows it to work with
   the new setresuid calls in auth2-pubkey.  with tim@, ok djm@
 - (dtucker) [auth2-pubkey.c] wrap paths.h in an ifdef for platforms that
   don't have it.  Spotted by tim@.

20121104
 - (djm) OpenBSD CVS Sync
   - jmc@cvs.openbsd.org 2012/10/31 08:04:50
     [sshd_config.5]
     tweak previous;
   - djm@cvs.openbsd.org 2012/11/04 10:38:43
     [auth2-pubkey.c sshd.c sshd_config.5]
     Remove default of AuthorizedCommandUser. Administrators are now expected
     to explicitly specify a user. feedback and ok markus@
   - djm@cvs.openbsd.org 2012/11/04 11:09:15
     [auth.h auth1.c auth2.c monitor.c servconf.c servconf.h sshd.c]
     [sshd_config.5]
     Support multiple required authentication via an AuthenticationMethods
     option. This option lists one or more comma-separated lists of
     authentication method names. Successful completion of all the methods in
     any list is required for authentication to complete;
     feedback and ok markus@

20121030
 - (djm) OpenBSD CVS Sync
   - markus@cvs.openbsd.org 2012/10/05 12:34:39
     [sftp.c]
     fix signed vs unsigned warning; feedback & ok: djm@
   - djm@cvs.openbsd.org 2012/10/30 21:29:55
     [auth-rsa.c auth.c auth.h auth2-pubkey.c servconf.c servconf.h]
     [sshd.c sshd_config sshd_config.5]
     new sshd_config option AuthorizedKeysCommand to support fetching
     authorized_keys from a command in addition to (or instead of) from
     the filesystem. The command is run as the target server user unless
     another specified via a new AuthorizedKeysCommandUser option.
     
     patch originally by jchadima AT redhat.com, reworked by me; feedback
     and ok markus@

20121019
 - (tim) [buildpkg.sh.in] Double up on some backslashes so they end up in
   the generated file as intended.

20121005
 - (dtucker) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2012/09/17 09:54:44
     [sftp.c]
     an XXX for later
   - markus@cvs.openbsd.org 2012/09/17 13:04:11
     [packet.c]
     clear old keys on rekeing; ok djm
   - dtucker@cvs.openbsd.org 2012/09/18 10:36:12
     [sftp.c]
     Add bounds check on sftp tab-completion.  Part of a patch from from
     Jean-Marc Robert via tech@, ok djm
   - dtucker@cvs.openbsd.org 2012/09/21 10:53:07
     [sftp.c]
     Fix improper handling of absolute paths when PWD is part of the completed
     path.  Patch from Jean-Marc Robert via tech@, ok djm.
  - dtucker@cvs.openbsd.org 2012/09/21 10:55:04
     [sftp.c]
     Fix handling of filenames containing escaped globbing characters and
     escape "#" and "*".  Patch from Jean-Marc Robert via tech@, ok djm.
   - jmc@cvs.openbsd.org 2012/09/26 16:12:13
     [ssh.1]
     last stage of rfc changes, using consistent Rs/Re blocks, and moving the
     references into a STANDARDS section;
   - naddy@cvs.openbsd.org 2012/10/01 13:59:51
     [monitor_wrap.c]
     pasto; ok djm@
   - djm@cvs.openbsd.org 2012/10/02 07:07:45
     [ssh-keygen.c]
     fix -z option, broken in revision 1.215
   - markus@cvs.openbsd.org 2012/10/04 13:21:50
     [myproposal.h ssh_config.5 umac.h sshd_config.5 ssh.1 sshd.8 mac.c]
     add umac128 variant; ok djm@ at n2k12
  - dtucker@cvs.openbsd.org 2012/09/06 04:11:07
     [regress/try-ciphers.sh]
     Restore missing space.  (Id sync only).
   - dtucker@cvs.openbsd.org 2012/09/09 11:51:25
     [regress/multiplex.sh]
     Add test for ssh -Ostop
   - dtucker@cvs.openbsd.org 2012/09/10 00:49:21
     [regress/multiplex.sh]
     Log -O cmd output to the log file and make logging consistent with the
     other tests.  Test clean shutdown of an existing channel when testing
     "stop".
   - dtucker@cvs.openbsd.org 2012/09/10 01:51:19
     [regress/multiplex.sh]
     use -Ocheck and waiting for completions by PID to make multiplexing test
     less racy and (hopefully) more reliable on slow hardware.
 - [Makefile umac.c] Add special-case target to build umac128.o.
 - [umac.c] Enforce allowed umac output sizes.  From djm@.
 - [Makefile.in] "Using $< in a non-suffix rule context is a GNUmake idiom".

20120917
 - (dtucker) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2012/09/13 23:37:36
     [servconf.c]
     Fix comment line length
   - markus@cvs.openbsd.org 2012/09/14 16:51:34
     [sshconnect.c]
     remove unused variable

20120907
 - (dtucker) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2012/09/06 09:50:13
     [clientloop.c]
     Make the escape command help (~?) context sensitive so that only commands
     that will work in the current session are shown.  ok markus@
   - jmc@cvs.openbsd.org 2012/09/06 13:57:42
     [ssh.1]
     missing letter in previous;
   - dtucker@cvs.openbsd.org 2012/09/07 00:30:19
     [clientloop.c]
     Print '^Z' instead of a raw ^Z when the sequence is not supported.  ok djm@
   - dtucker@cvs.openbsd.org 2012/09/07 01:10:21
     [clientloop.c]
     Merge escape help text for ~v and ~V; ok djm@
   - dtucker@cvs.openbsd.org 2012/09/07 06:34:21
     [clientloop.c]
     when muxmaster is run with -N, make it shut down gracefully when a client
     sends it "-O stop" rather than hanging around (bz#1985).  ok djm@

20120906
 - (dtucker) OpenBSD CVS Sync
   - jmc@cvs.openbsd.org 2012/08/15 18:25:50
     [ssh-keygen.1]
     a little more info on certificate validity;
     requested by Ross L Richardson, and provided by djm
   - dtucker@cvs.openbsd.org 2012/08/17 00:45:45
     [clientloop.c clientloop.h mux.c]
     Force a clean shutdown of ControlMaster client sessions when the ~. escape
     sequence is used.  This means that ~. should now work in mux clients even
     if the server is no longer responding.  Found by tedu, ok djm.
   - djm@cvs.openbsd.org 2012/08/17 01:22:56
     [kex.c]
     add some comments about better handling first-KEX-follows notifications
     from the server. Nothing uses these right now. No binary change
   - djm@cvs.openbsd.org 2012/08/17 01:25:58
     [ssh-keygen.c]
     print details of which host lines were deleted when using
     "ssh-keygen -R host"; ok markus@
   - djm@cvs.openbsd.org 2012/08/17 01:30:00
     [compat.c sshconnect.c]
     Send client banner immediately, rather than waiting for the server to
     move first for SSH protocol 2 connections (the default). Patch based on
     one in bz#1999 by tls AT panix.com, feedback dtucker@ ok markus@
   - dtucker@cvs.openbsd.org 2012/09/06 04:37:39
     [clientloop.c log.c ssh.1 log.h]
     Add ~v and ~V escape sequences to raise and lower the logging level
     respectively. Man page help from jmc, ok deraadt jmc

20120830
 - (dtucker) [moduli] Import new moduli file.

20120828
 - (djm) Release openssh-6.1

20120828
 - (dtucker) [openbsd-compat/bsd-cygwin_util.h] define WIN32_LEAN_AND_MEAN
   for compatibility with future mingw-w64 headers.  Patch from vinschen at
   redhat com.

20120822
 - (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
   [contrib/suse/openssh.spec] Update version numbers

20120731
 - (djm) OpenBSD CVS Sync
   - jmc@cvs.openbsd.org 2012/07/06 06:38:03
     [ssh-keygen.c]
     missing full stop in usage();
   - djm@cvs.openbsd.org 2012/07/10 02:19:15
     [servconf.c servconf.h sshd.c sshd_config]
     Turn on systrace sandboxing of pre-auth sshd by default for new installs
     by shipping a config that overrides the current UsePrivilegeSeparation=yes
     default. Make it easier to flip the default in the future by adding too.
     prodded markus@ feedback dtucker@ "get it in" deraadt@
   - dtucker@cvs.openbsd.org 2012/07/13 01:35:21
     [servconf.c]
     handle long comments in config files better.  bz#2025, ok markus
   - markus@cvs.openbsd.org 2012/07/22 18:19:21
     [version.h]
     openssh 6.1

20120720
 - (dtucker) Import regened moduli file.

20120706
 - (djm) [sandbox-seccomp-filter.c] fallback to rlimit if seccomp filter is
   not available. Allows use of sshd compiled on host with a filter-capable
   kernel on hosts that lack the support. bz#2011 ok dtucker@
 - (djm) [configure.ac] Recursively expand $(bindir) to ensure it has no
   unexpanded $(prefix) embedded. bz#2007 patch from nix-corp AT
   esperi.org.uk; ok dtucker@
- (djm) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2012/07/06 00:41:59
     [moduli.c ssh-keygen.1 ssh-keygen.c]
     Add options to specify starting line number and number of lines to process
     when screening moduli candidates.  This allows processing of different
     parts of a candidate moduli file in parallel.  man page help jmc@, ok djm@
   - djm@cvs.openbsd.org 2012/07/06 01:37:21
     [mux.c]
     fix memory leak of passed-in environment variables and connection
     context when new session message is malformed; bz#2003 from Bert.Wesarg
     AT googlemail.com
   - djm@cvs.openbsd.org 2012/07/06 01:47:38
     [ssh.c]
     move setting of tty_flag to after config parsing so RequestTTY options
     are correctly picked up. bz#1995 patch from przemoc AT gmail.com;
     ok dtucker@

20120704
 - (dtucker) [configure.ac openbsd-compat/bsd-misc.h] Add setlinebuf for
   platforms that don't have it.  "looks good" tim@

20120703
 - (dtucker) [configure.ac] Detect platforms that can't use select(2) with
   setrlimit(RLIMIT_NOFILE, rl_zero) and disable the rlimit sandbox on those.
 - (dtucker) [configure.ac sandbox-rlimit.c] Test whether or not
   setrlimit(RLIMIT_FSIZE, rl_zero) and skip it if it's not supported.  Its
   benefit is minor, so it's not worth disabling the sandbox if it doesn't
   work.

20120702
- (dtucker) OpenBSD CVS Sync
   - naddy@cvs.openbsd.org 2012/06/29 13:57:25
     [ssh_config.5 sshd_config.5]
     match the documented MAC order of preference to the actual one;
     ok dtucker@
   - markus@cvs.openbsd.org 2012/06/30 14:35:09
     [sandbox-systrace.c sshd.c]
     fix a during the load of the sandbox policies (child can still make
     the read-syscall and wait forever for systrace-answers) by replacing
     the read/write synchronisation with SIGSTOP/SIGCONT;
     report and help hshoexer@; ok djm@, dtucker@
   - dtucker@cvs.openbsd.org 2012/07/02 08:50:03
     [ssh.c]
     set interactive ToS for forwarded X11 sessions.  ok djm@
   - dtucker@cvs.openbsd.org 2012/07/02 12:13:26
     [ssh-pkcs11-helper.c sftp-client.c]
     fix a couple of "assigned but not used" warnings.  ok markus@
   - dtucker@cvs.openbsd.org 2012/07/02 14:37:06
     [regress/connect-privsep.sh]
     remove exit from end of test since it prevents reporting failure
 - (dtucker) [regress/reexec.sh regress/sftp-cmds.sh regress/test-exec.sh]
   Move cygwin detection to test-exec and use to skip reexec test on cygwin.
 - (dtucker) [regress/test-exec.sh] Correct uname for cygwin/w2k.

20120629
 - OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2012/06/21 00:16:07
     [addrmatch.c]
     fix strlcpy truncation check.  from carsten at debian org, ok markus
   - dtucker@cvs.openbsd.org 2012/06/22 12:30:26
     [monitor.c sshconnect2.c]
     remove dead code following 'for (;;)' loops.
     From Steve.McClellan at radisys com, ok markus@
   - dtucker@cvs.openbsd.org 2012/06/22 14:36:33
     [sftp.c]
     Remove unused variable leftover from tab-completion changes.
     From Steve.McClellan at radisys com, ok markus@
   - dtucker@cvs.openbsd.org 2012/06/26 11:02:30
     [sandbox-systrace.c]
     Add mquery to the list of allowed syscalls for "UsePrivilegeSeparation
     sandbox" since malloc now uses it.  From johnw.mail at gmail com.
   - dtucker@cvs.openbsd.org 2012/06/28 05:07:45
     [mac.c myproposal.h ssh_config.5 sshd_config.5]
     Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs since they were removed
     from draft6 of the spec and will not be in the RFC when published.  Patch
     from mdb at juniper net via bz#2023, ok markus.
   - naddy@cvs.openbsd.org 2012/06/29 13:57:25
     [ssh_config.5 sshd_config.5]
     match the documented MAC order of preference to the actual one; ok dtucker@
   - dtucker@cvs.openbsd.org 2012/05/13 01:42:32
     [regress/addrmatch.sh]
     Add "Match LocalAddress" and "Match LocalPort" to sshd and adjust tests
     to match.  Feedback and ok djm@ markus@.
   - djm@cvs.openbsd.org 2012/06/01 00:47:35
     [regress/multiplex.sh regress/forwarding.sh]
     append to rather than truncate test log; bz#2013 from openssh AT
     roumenpetrov.info
   - djm@cvs.openbsd.org 2012/06/01 00:52:52
     [regress/sftp-cmds.sh]
     don't delete .* on cleanup due to unintended env expansion; pointed out in
     bz#2014 by openssh AT roumenpetrov.info
   - dtucker@cvs.openbsd.org 2012/06/26 12:06:59
     [regress/connect-privsep.sh]
     test sandbox with every malloc option
   - dtucker@cvs.openbsd.org 2012/06/28 05:07:45
     [regress/try-ciphers.sh regress/cipher-speed.sh]
     Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs since they were removed
     from draft6 of the spec and will not be in the RFC when published.  Patch
     from mdb at juniper net via bz#2023, ok markus.
 - (dtucker) [myproposal.h] Remove trailing backslash to fix compile error.
 - (dtucker) [key.c] ifdef out sha256 key types on platforms that don't have
   the required functions in libcrypto.

20120628
 - (dtucker) [openbsd-compat/getrrsetbyname-ldns.c] bz #2022: prevent null
   pointer deref in the client when built with LDNS and using DNSSEC with a
   CNAME.  Patch from gregdlg+mr at hochet info.

20120622
 - (dtucker) [contrib/cygwin/ssh-host-config] Ensure that user sshd runs as
   can logon as a service.  Patch from vinschen at redhat com.

20120620
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/12/02 00:41:56
     [mux.c]
     fix bz#1948: ssh -f doesn't fork for multiplexed connection.
     ok dtucker@
   - djm@cvs.openbsd.org 2011/12/04 23:16:12
     [mux.c]
     revert:
     > revision 1.32
     > date: 2011/12/02 00:41:56;  author: djm;  state: Exp;  lines: +4 -1
     > fix bz#1948: ssh -f doesn't fork for multiplexed connection.
     > ok dtucker@
     it interacts badly with ControlPersist
   - djm@cvs.openbsd.org 2012/01/07 21:11:36
     [mux.c]
     fix double-free in new session handler
     NB. Id sync only
   - djm@cvs.openbsd.org 2012/05/23 03:28:28
     [dns.c dns.h key.c key.h ssh-keygen.c]
     add support for RFC6594 SSHFP DNS records for ECDSA key types.
     patch from bugzilla-m67 AT nulld.me in bz#1978; ok + tweak markus@
     (Original authors Ondřej Surý,  Ondřej Caletka and Daniel Black)
   - djm@cvs.openbsd.org 2012/06/01 00:49:35
     [PROTOCOL.mux]
     correct types of port numbers (integers, not strings); bz#2004 from
     bert.wesarg AT googlemail.com
   - djm@cvs.openbsd.org 2012/06/01 01:01:22
     [mux.c]
     fix memory leak when mux socket creation fails; bz#2002 from bert.wesarg
     AT googlemail.com
   - dtucker@cvs.openbsd.org 2012/06/18 11:43:53
     [jpake.c]
     correct sizeof usage.  patch from saw at online.de, ok deraadt
   - dtucker@cvs.openbsd.org 2012/06/18 11:49:58
     [ssh_config.5]
     RSA instead of DSA twice.  From Steve.McClellan at radisys com
   - dtucker@cvs.openbsd.org 2012/06/18 12:07:07
     [ssh.1 sshd.8]
     Remove mention of 'three' key files since there are now four.  From
     Steve.McClellan at radisys com.
   - dtucker@cvs.openbsd.org 2012/06/18 12:17:18
     [ssh.1]
     Clarify description of -W.  Noted by Steve.McClellan at radisys com,
     ok jmc
   - markus@cvs.openbsd.org 2012/06/19 18:25:28
     [servconf.c servconf.h sshd_config.5]
     sshd_config: extend Match to allow AcceptEnv and {Allow,Deny}{Users,Groups}
     this allows 'Match LocalPort 1022' combined with 'AllowUser bauer'
     ok djm@ (back in March)
   - jmc@cvs.openbsd.org 2012/06/19 21:35:54
     [sshd_config.5]
     tweak previous; ok markus
   - djm@cvs.openbsd.org 2012/06/20 04:42:58
     [clientloop.c serverloop.c]
     initialise accept() backoff timer to avoid EINVAL from select(2) in
     rekeying

20120519
 - (dtucker) [configure.ac] bz#2010: fix non-portable shell construct.  Patch
   from cjwatson at debian org.
 - (dtucker) [configure.ac contrib/Makefile] bz#1996: use AC_PATH_TOOL to find
   pkg-config so it does the right thing when cross-compiling.  Patch from
   cjwatson at debian org.
- (dtucker) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2012/05/13 01:42:32
     [servconf.h servconf.c sshd.8 sshd.c auth.c sshd_config.5]
     Add "Match LocalAddress" and "Match LocalPort" to sshd and adjust tests
     to match.  Feedback and ok djm@ markus@.
   - dtucker@cvs.openbsd.org 2012/05/19 06:30:30
     [sshd_config.5]
     Document PermitOpen none.  bz#2001, patch from Loganaden Velvindron

20120504
 - (dtucker) [configure.ac] Include <sys/param.h> rather than <sys/types.h>
   to fix building on some plaforms.  Fom bowman at math utah edu and
   des at des no.

20120427
 - (dtucker) [regress/addrmatch.sh] skip tests when running on a non-ipv6
   platform rather than exiting early, so that we still clean up and return
   success or failure to test-exec.sh

20120426
 - (djm) [auth-passwd.c] Handle crypt() returning NULL; from Paul Wouters
   via Niels
 - (djm) [auth-krb5.c] Save errno across calls that might modify it;
   ok dtucker@

20120423
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2012/04/23 08:18:17
     [channels.c]
     fix function proto/source mismatch

20120422
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2012/02/29 11:21:26
     [ssh-keygen.c]
     allow conversion of RSA1 keys to public PEM and PKCS8; "nice" markus@
   - guenther@cvs.openbsd.org 2012/03/15 03:10:27
     [session.c]
     root should always be excluded from the test for /etc/nologin instead
     of having it always enforced even when marked as ignorenologin.  This
     regressed when the logic was incompletely flipped around in rev 1.251
     ok halex@ millert@
   - djm@cvs.openbsd.org 2012/03/28 07:23:22
     [PROTOCOL.certkeys]
     explain certificate extensions/crit split rationale. Mention requirement
     that each appear at most once per cert.
   - dtucker@cvs.openbsd.org 2012/03/29 23:54:36
     [channels.c channels.h servconf.c]
     Add PermitOpen none option based on patch from Loganaden Velvindron
     (bz #1949).  ok djm@
   - djm@cvs.openbsd.org 2012/04/11 13:16:19
     [channels.c channels.h clientloop.c serverloop.c]
     don't spin in accept() when out of fds (ENFILE/ENFILE) - back off for a
     while; ok deraadt@ markus@
   - djm@cvs.openbsd.org 2012/04/11 13:17:54
     [auth.c]
     Support "none" as an argument for AuthorizedPrincipalsFile to indicate
     no file should be read.
   - djm@cvs.openbsd.org 2012/04/11 13:26:40
     [sshd.c]
     don't spin in accept() when out of fds (ENFILE/ENFILE) - back off for a
     while; ok deraadt@ markus@
   - djm@cvs.openbsd.org 2012/04/11 13:34:17
     [ssh-keyscan.1 ssh-keyscan.c]
     now that sshd defaults to offering ECDSA keys, ssh-keyscan should also
     look for them by default; bz#1971
   - djm@cvs.openbsd.org 2012/04/12 02:42:32
     [servconf.c servconf.h sshd.c sshd_config sshd_config.5]
     VersionAddendum option to allow server operators to append some arbitrary
     text to the SSH-... banner; ok deraadt@ "don't care" markus@
   - djm@cvs.openbsd.org 2012/04/12 02:43:55
     [sshd_config sshd_config.5]
     mention AuthorizedPrincipalsFile=none default
   - djm@cvs.openbsd.org 2012/04/20 03:24:23
     [sftp.c]
     setlinebuf(3) is more readable than setvbuf(.., _IOLBF, ...)
   - jmc@cvs.openbsd.org 2012/04/20 16:26:22
     [ssh.1]
     use "brackets" instead of "braces", for consistency;

20120420
 - (djm) [contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
   [contrib/suse/openssh.spec] Update for release 6.0
 - (djm) [README] Update URL to release notes.
 - (djm) Release openssh-6.0

20120419
 - (djm) [configure.ac] Fix compilation error on FreeBSD, whose libutil
   contains openpty() but not login()

20120404
 - (djm) [Makefile.in configure.ac sandbox-seccomp-filter.c] Add sandbox
   mode for Linux's new seccomp filter; patch from Will Drewry; feedback
   and ok dtucker@

20120330
 - (dtucker) [contrib/redhat/openssh.spec] Bug #1992: remove now-gone WARNING
   file from spec file.  From crighter at nuclioss com.
 - (djm) [entropy.c] bz#1991: relax OpenSSL version test to allow running
   openssh binaries on a newer fix release than they were compiled on.
   with and ok dtucker@
 - (djm) [openbsd-compat/bsd-cygwin_util.h] #undef _WIN32 to avoid incorrect
   assumptions when building on Cygwin; patch from Corinna Vinschen

20120309
 - (djm) [openbsd-compat/port-linux.c] bz#1960: fix crash on SELinux 
   systems where sshd is run in te wrong context. Patch from Sven
   Vermeulen; ok dtucker@
 - (djm) [packet.c] bz#1963: Fix IPQoS not being set on non-mapped v4-in-v6
   addressed connections. ok dtucker@

20120224
 - (dtucker) [audit-bsm.c configure.ac] bug #1968: enable workarounds for BSM
   audit breakage in Solaris 11.  Patch from Magnus Johansson.

20120215
 - (tim) [openbsd-compat/bsd-misc.h sshd.c] Fix conflicting return type for
   unsetenv due to rev 1.14 change to setenv.c. Cast unsetenv to void in sshd.c
   ok dtucker@
 - (tim) [defines.h] move chunk introduced in 1.125 before MAXPATHLEN so
   it actually works.
 - (tim) [regress/keytype.sh] stderr redirection needs to be inside back quote
   to work. Spotted by Angel Gonzalez

20120214
 - (djm) [openbsd-compat/bsd-cygwin_util.c] Add PROGRAMFILES to list of
   preserved Cygwin environment variables; from Corinna Vinschen

20120211
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2012/01/05 00:16:56
     [monitor.c]
     memleak on error path
   - djm@cvs.openbsd.org 2012/01/07 21:11:36
     [mux.c]
     fix double-free in new session handler
   - miod@cvs.openbsd.org 2012/01/08 13:17:11
     [ssh-ecdsa.c]
     Fix memory leak in ssh_ecdsa_verify(); from Loganaden Velvindron,
     ok markus@
   - miod@cvs.openbsd.org 2012/01/16 20:34:09
     [ssh-pkcs11-client.c]
     Fix a memory leak in pkcs11_rsa_private_encrypt(), reported by Jan Klemkow.
     While there, be sure to buffer_clear() between send_msg() and recv_msg().
     ok markus@
   - dtucker@cvs.openbsd.org 2012/01/18 21:46:43
     [clientloop.c]
     Ensure that $DISPLAY contains only valid characters before using it to
     extract xauth data so that it can't be used to play local shell
     metacharacter games.  Report from r00t_ati at ihteam.net, ok markus.
   - markus@cvs.openbsd.org 2012/01/25 19:26:43
     [packet.c]
     do not permit SSH2_MSG_SERVICE_REQUEST/ACCEPT during rekeying;
     ok dtucker@, djm@
   - markus@cvs.openbsd.org 2012/01/25 19:36:31
     [authfile.c]
     memleak in key_load_file(); from Jan Klemkow
   - markus@cvs.openbsd.org 2012/01/25 19:40:09
     [packet.c packet.h]
     packet_read_poll() is not used anymore.
   - markus@cvs.openbsd.org 2012/02/09 20:00:18
     [version.h]
     move from 6.0-beta to 6.0

20120206
 - (djm) [ssh-keygen.c] Don't fail in do_gen_all_hostkeys on platforms
   that don't support ECC. Patch from Phil Oleson

20111219
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/12/02 00:41:56
     [mux.c]
     fix bz#1948: ssh -f doesn't fork for multiplexed connection.
     ok dtucker@
   - djm@cvs.openbsd.org 2011/12/02 00:43:57
     [mac.c]
     fix bz#1934: newer OpenSSL versions will require HMAC_CTX_Init before
     HMAC_init (this change in policy seems insane to me)
     ok dtucker@
   - djm@cvs.openbsd.org 2011/12/04 23:16:12
     [mux.c]
     revert:
     > revision 1.32
     > date: 2011/12/02 00:41:56;  author: djm;  state: Exp;  lines: +4 -1
     > fix bz#1948: ssh -f doesn't fork for multiplexed connection.
     > ok dtucker@
     it interacts badly with ControlPersist
   - djm@cvs.openbsd.org 2011/12/07 05:44:38
     [auth2.c dh.c packet.c roaming.h roaming_client.c roaming_common.c]
     fix some harmless and/or unreachable int overflows;
     reported Xi Wang, ok markus@

20111125
 - OpenBSD CVS Sync
   - oga@cvs.openbsd.org 2011/11/16 12:24:28
     [sftp.c]
     Don't leak list in complete_cmd_parse if there are no commands found.
     Discovered when I was ``borrowing'' this code for something else.
     ok djm@

20111121
 - (dtucker) [configure.ac] Set _FORTIFY_SOURCE.  ok djm@

20111104
 - (dtucker) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/10/18 05:15:28
     [ssh.c]
     ssh(1): skip attempting to create ~/.ssh when -F is passed; ok markus@
   - djm@cvs.openbsd.org 2011/10/18 23:37:42
     [ssh-add.c]
     add -k to usage(); reminded by jmc@
   - djm@cvs.openbsd.org 2011/10/19 00:06:10
     [moduli.c]
     s/tmpfile/tmp/ to make this -Wshadow clean
   - djm@cvs.openbsd.org 2011/10/19 10:39:48
     [umac.c]
     typo in comment; patch from Michael W. Bombardieri
   - djm@cvs.openbsd.org 2011/10/24 02:10:46
     [ssh.c]
     bz#1943: unbreak stdio forwarding when ControlPersist is in user - ssh
     was incorrectly requesting the forward in both the control master and
     slave. skip requesting it in the master to fix. ok markus@
   - djm@cvs.openbsd.org 2011/10/24 02:13:13
     [session.c]
     bz#1859: send tty break to pty master instead of (probably already
     closed) slave side; "looks good" markus@
   - dtucker@cvs.openbsd.org 011/11/04 00:09:39
     [moduli]
     regenerated moduli file; ok deraadt
 - (dtucker) [INSTALL LICENCE configure.ac openbsd-compat/Makefile.in
   openbsd-compat/getrrsetbyname-ldns.c openbsd-compat/getrrsetbyname.c]
   bz 1320: Add optional support for LDNS, a BSD licensed DNS resolver library
   which supports DNSSEC.  Patch from Simon Vallet (svallet at genoscope cns fr)
   with some rework from myself and djm.  ok djm.

20111025
 - (dtucker) [contrib/cygwin/Makefile] Continue if installing a doc file
   fails.  Patch from Corinna Vinschen.

20111018
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/10/04 14:17:32
     [sftp-glob.c]
     silence error spam for "ls */foo" in directory with files; bz#1683
   - dtucker@cvs.openbsd.org 2011/10/16 11:02:46
     [moduli.c ssh-keygen.1 ssh-keygen.c]
     Add optional checkpoints for moduli screening.  feedback & ok deraadt
   - jmc@cvs.openbsd.org 2011/10/16 15:02:41
     [ssh-keygen.c]
     put -K in the right place (usage());
   - stsp@cvs.openbsd.org 2011/10/16 15:51:39
     [moduli.c]
     add missing includes to unbreak tree; fix from rpointel
   - djm@cvs.openbsd.org 2011/10/18 04:58:26
     [auth-options.c key.c]
     remove explict search for \0 in packet strings, this job is now done
     implicitly by buffer_get_cstring; ok markus
   - djm@cvs.openbsd.org 2011/10/18 05:00:48
     [ssh-add.1 ssh-add.c]
     new "ssh-add -k" option to load plain keys (skipping certificates);
     "looks ok" markus@

20111001
 - (dtucker) [openbsd-compat/mktemp.c] Fix compiler warning.  ok djm
 - (dtucker) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2011/09/23 00:22:04
     [channels.c auth-options.c servconf.c channels.h sshd.8]
     Add wildcard support to PermitOpen, allowing things like "PermitOpen
     localhost:*".  bz #1857, ok djm markus.
   - markus@cvs.openbsd.org 2011/09/23 07:45:05
     [mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c
     version.h]
     unbreak remote portforwarding with dynamic allocated listen ports:
     1) send the actual listen port in the open message (instead of 0).
        this allows multiple forwardings with a dynamic listen port
     2) update the matching permit-open entry, so we can identify where
        to connect to
     report: den at skbkontur.ru and P. Szczygielski
     feedback and ok djm@
   - djm@cvs.openbsd.org 2011/09/25 05:44:47
     [auth2-pubkey.c]
     improve the AuthorizedPrincipalsFile debug log message to include
     file and line number
   - dtucker@cvs.openbsd.org 2011/09/30 00:47:37
     [sshd.c]
     don't attempt privsep cleanup when not using privsep; ok markus@
   - djm@cvs.openbsd.org 2011/09/30 21:22:49
     [sshd.c]
     fix inverted test that caused logspam; spotted by henning@

20110929
 - (djm) [configure.ac defines.h] No need to detect sizeof(char); patch
   from des AT des.no
 - (dtucker) [configure.ac openbsd-compat/Makefile.in
   openbsd-compat/strnlen.c] Add strnlen to the compat library.

20110923
 - (djm) [openbsd-compat/getcwd.c] Remove OpenBSD rcsid marker since we no
   longer want to sync this file (OpenBSD uses a __getcwd syscall now, we
   want this longhand version)
 - (djm) [openbsd-compat/getgrouplist.c] Remove OpenBSD rcsid marker: the
   upstream version is YPified and we don't want this
 - (djm) [openbsd-compat/mktemp.c] forklift upgrade to -current version.
   The file was totally rewritten between what we had in tree and -current.
 - (djm) [openbsd-compat/sha2.c openbsd-compat/sha2.h] Remove OpenBSD rcsid
   marker. The upstream API has changed (function and structure names)
   enough to put it out of sync with other providers of this interface.
 - (djm) [openbsd-compat/setenv.c] Forklift upgrade, including inclusion
   of static __findenv() function from upstream setenv.c
 - OpenBSD CVS Sync
   - millert@cvs.openbsd.org 2006/05/05 15:27:38
     [openbsd-compat/strlcpy.c]
     Convert do {} while loop -> while {} for clarity.  No binary change
     on most architectures.  From Oliver Smith.  OK deraadt@ and henning@
   - tobias@cvs.openbsd.org 2007/10/21 11:09:30
     [openbsd-compat/mktemp.c]
     Comment fix about time consumption of _gettemp.
     FreeBSD did this in revision 1.20.
     OK deraadt@, krw@
   - deraadt@cvs.openbsd.org 2008/07/22 21:47:45
     [openbsd-compat/mktemp.c]
     use arc4random_uniform(); ok djm millert
   - millert@cvs.openbsd.org 2008/08/21 16:54:44
     [openbsd-compat/mktemp.c]
     Remove useless code, the kernel will set errno appropriately if an
     element in the path does not exist.  OK deraadt@ pvalchev@
   - otto@cvs.openbsd.org 2008/12/09 19:38:38
     [openbsd-compat/inet_ntop.c]
     fix inet_ntop(3) prototype; ok millert@ libc to be bumbed very soon

20110922
 - OpenBSD CVS Sync
   - pyr@cvs.openbsd.org 2011/05/12 07:15:10
     [openbsd-compat/glob.c]
     When the max number of items for a directory has reached GLOB_LIMIT_READDIR
     an error is returned but closedir() is not called.
     spotted and fix provided by Frank Denis obsd-tech@pureftpd.org
     ok otto@, millert@
   - stsp@cvs.openbsd.org 2011/09/20 10:18:46
     [glob.c]
     In glob(3), limit recursion during matching attempts. Similar to
     fnmatch fix. Also collapse consecutive '*' (from NetBSD).
     ok miod deraadt
   - djm@cvs.openbsd.org 2011/09/22 06:27:29
     [glob.c]
     fix GLOB_KEEPSTAT without GLOB_NOSORT; the implicit sort was being
     applied only to the gl_pathv vector and not the corresponding gl_statv
     array. reported in OpenSSH bz#1935; feedback and okay matthew@
   - djm@cvs.openbsd.org 2011/08/26 01:45:15
     [ssh.1]
     Add some missing ssh_config(5) options that can be used in ssh(1)'s
     -o argument. Patch from duclare AT guu.fi
   - djm@cvs.openbsd.org 2011/09/05 05:56:13
     [scp.1 sftp.1]
     mention ControlPersist and KbdInteractiveAuthentication in the -o
     verbiage in these pages too (prompted by jmc@)
   - djm@cvs.openbsd.org 2011/09/05 05:59:08
     [misc.c]
     fix typo in IPQoS parsing: there is no "AF14" class, but there is
     an "AF21" class. Spotted by giesen AT snickers.org; ok markus stevesk
   - jmc@cvs.openbsd.org 2011/09/05 07:01:44
     [scp.1]
     knock out a useless Ns;
   - deraadt@cvs.openbsd.org 2011/09/07 02:18:31
     [ssh-keygen.1]
     typo (they vs the) found by Lawrence Teo
   - djm@cvs.openbsd.org 2011/09/09 00:43:00
     [ssh_config.5 sshd_config.5]
     fix typo in IPQoS parsing: there is no "AF14" class, but there is
     an "AF21" class. Spotted by giesen AT snickers.org; ok markus stevesk
   - djm@cvs.openbsd.org 2011/09/09 00:44:07
     [PROTOCOL.mux]
     MUX_C_CLOSE_FWD includes forward type in message (though it isn't
     implemented anyway)
   - djm@cvs.openbsd.org 2011/09/09 22:37:01
     [scp.c]
     suppress adding '--' to remote commandlines when the first argument
     does not start with '-'. saves breakage on some difficult-to-upgrade
     embedded/router platforms; feedback & ok dtucker ok markus
   - djm@cvs.openbsd.org 2011/09/09 22:38:21
     [sshd.c]
     kill the preauth privsep child on fatal errors in the monitor;
     ok markus@
   - djm@cvs.openbsd.org 2011/09/09 22:46:44
     [channels.c channels.h clientloop.h mux.c ssh.c]
     support for cancelling local and remote port forwards via the multiplex
     socket. Use ssh -O cancel -L xx:xx:xx -R yy:yy:yy user@host" to request
     the cancellation of the specified forwardings; ok markus@
   - markus@cvs.openbsd.org 2011/09/10 22:26:34
     [channels.c channels.h clientloop.c ssh.1]
     support cancellation of local/dynamic forwardings from ~C commandline;
     ok & feedback djm@
   - okan@cvs.openbsd.org 2011/09/11 06:59:05
     [ssh.1]
     document new -O cancel command; ok djm@
   - markus@cvs.openbsd.org 2011/09/11 16:07:26
     [sftp-client.c]
     fix leaks in do_hardlink() and do_readlink(); bz#1921
     from Loganaden Velvindron
   - markus@cvs.openbsd.org 2011/09/12 08:46:15
     [sftp-client.c]
     fix leak in do_lsreaddir(); ok djm
   - djm@cvs.openbsd.org 2011/09/22 06:29:03
     [sftp.c]
     don't let remote_glob() implicitly sort its results in do_globbed_ls() -
     in all likelihood, they will be resorted anyway

20110909
 - (dtucker) [entropy.h] Bug #1932: remove old definition of init_rng.  From
   Colin Watson.

20110906
 - (djm) [README version.h] Correct version
 - (djm) [contrib/redhat/openssh.spec] Correct restorcon => restorecon
 - (djm) Respin OpenSSH-5.9p1 release

20110905
 - (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
   [contrib/suse/openssh.spec] Update version numbers.

20110904
 - (djm) [regress/connect-privsep.sh regress/test-exec.sh] demote fatal
   regress errors for the sandbox to warnings. ok tim dtucker
 - (dtucker) [ssh-keygen.c ssh-pkcs11.c] Bug #1929: add null implementations
   ofsh-pkcs11.cpkcs_init and pkcs_terminate for building without dlopen
   support.

20110829
 - (djm) [openbsd-compat/port-linux.c] Suppress logging when attempting
   to switch SELinux context away from unconfined_t, based on patch from
   Jan Chadima; bz#1919 ok dtucker@

20110827
 - (dtucker) [auth-skey.c] Add log.h to fix build --with-skey.

20110818
 - (tim) [configure.ac] Typo in error message spotted by Andy Tsouladze

20110817
 - (tim) [mac.c myproposal.h] Wrap SHA256 and SHA512 in ifdefs for
   OpenSSL 0.9.7. ok djm
 - (djm) [ openbsd-compat/bsd-cygwin_util.c openbsd-compat/bsd-cygwin_util.h]
   binary_pipe is no longer required on Cygwin; patch from Corinna Vinschen
 - (djm) [configure.ac] error out if the host lacks the necessary bits for
   an explicitly requested sandbox type
 - (djm) [contrib/ssh-copy-id] Missing backlslash; spotted by
   bisson AT archlinux.org
 - (djm) OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2011/06/03 05:35:10
     [regress/cfgmatch.sh]
     use OBJ to find test configs, patch from Tim Rice
   - markus@cvs.openbsd.org 2011/06/30 22:44:43
     [regress/connect-privsep.sh]
     test with sandbox enabled; ok djm@
   - djm@cvs.openbsd.org 2011/08/02 01:23:41
     [regress/cipher-speed.sh regress/try-ciphers.sh]
     add SHA256/SHA512 based HMAC modes
 - (djm) [regress/cipher-speed.sh regress/try-ciphers.sh] disable HMAC-SHA2
   MAC tests for platforms that hack EVP_SHA2 support

20110812
 - (dtucker) [openbsd-compat/port-linux.c] Bug 1924: Improve selinux context
   change error by reporting old and new context names  Patch from
   jchadima at redhat.
 - (djm) [contrib/redhat/openssh.spec contrib/redhat/sshd.init]
   [contrib/suse/openssh.spec contrib/suse/rc.sshd] Updated RHEL and SLES
   init scrips from imorgan AT nas.nasa.gov; bz#1920
 - (djm) [contrib/ssh-copy-id] Fix failure for cases where the path to the
   identify file contained whitespace. bz#1828 patch from gwenael.lambrouin
   AT gmail.com; ok dtucker@

20110807
 - (dtucker) OpenBSD CVS Sync
   - jmc@cvs.openbsd.org 2008/06/26 06:59:39
     [moduli.5]
     tweak previous;
   - sobrado@cvs.openbsd.org 2009/10/28 08:56:54
     [moduli.5]
     "Diffie-Hellman" is the usual spelling for the cryptographic protocol
     first published by Whitfield Diffie and Martin Hellman in 1976.
     ok jmc@
   - jmc@cvs.openbsd.org 2010/10/14 20:41:28
     [moduli.5]
     probabalistic -> probabilistic; from naddy
   - dtucker@cvs.openbsd.org 2011/08/07 12:55:30
     [sftp.1]
     typo, fix from Laurent Gautrot

20110805
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/06/23 23:35:42
     [monitor.c]
     ignore EINTR errors from poll()
   - tedu@cvs.openbsd.org 2011/07/06 18:09:21
     [authfd.c]
     bzero the agent address.  the kernel was for a while very cranky about
     these things.  evne though that's fixed, always good to initialize
     memory.  ok deraadt djm
   - djm@cvs.openbsd.org 2011/07/29 14:42:45
     [sandbox-systrace.c]
     fail open(2) with EPERM rather than SIGKILLing the whole process. libc
     will call open() to do strerror() when NLS is enabled;
     feedback and ok markus@
   - markus@cvs.openbsd.org 2011/08/01 19:18:15
     [gss-serv.c]
     prevent post-auth resource exhaustion (int overflow leading to 4GB malloc);
     report Adam Zabrock; ok djm@, deraadt@
   - djm@cvs.openbsd.org 2011/08/02 01:22:11
     [mac.c myproposal.h ssh.1 ssh_config.5 sshd.8 sshd_config.5]
     Add new SHA256 and SHA512 based HMAC modes from
     http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt
     Patch from mdb AT juniper.net; feedback and ok markus@
   - djm@cvs.openbsd.org 2011/08/02 23:13:01
     [version.h]
     crank now, release later
   - djm@cvs.openbsd.org 2011/08/02 23:15:03
     [ssh.c]
     typo in comment

20110624
 - (djm) [configure.ac Makefile.in sandbox-darwin.c] Add a sandbox for
   Darwin/OS X using sandbox_init() + setrlimit(); feedback and testing
   markus@

20110623
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/06/22 21:47:28
     [servconf.c]
     reuse the multistate option arrays to pretty-print options for "sshd -T"
   - djm@cvs.openbsd.org 2011/06/22 21:57:01
     [servconf.c servconf.h sshd.c sshd_config.5]
     [configure.ac Makefile.in]
     introduce sandboxing of the pre-auth privsep child using systrace(4).
     
     This introduces a new "UsePrivilegeSeparation=sandbox" option for
     sshd_config that applies mandatory restrictions on the syscalls the
     privsep child can perform. This prevents a compromised privsep child
     from being used to attack other hosts (by opening sockets and proxying)
     or probing local kernel attack surface.
     
     The sandbox is implemented using systrace(4) in unsupervised "fast-path"
     mode, where a list of permitted syscalls is supplied. Any syscall not
     on the list results in SIGKILL being sent to the privsep child. Note
     that this requires a kernel with the new SYSTR_POLICY_KILL option.
     
     UsePrivilegeSeparation=sandbox will become the default in the future
     so please start testing it now.
     
     feedback dtucker@; ok markus@
   - djm@cvs.openbsd.org 2011/06/22 22:08:42
     [channels.c channels.h clientloop.c clientloop.h mux.c ssh.c]
     hook up a channel confirm callback to warn the user then requested X11
     forwarding was refused by the server; ok markus@
   - djm@cvs.openbsd.org 2011/06/23 09:34:13
     [sshd.c ssh-sandbox.h sandbox.h sandbox-rlimit.c sandbox-systrace.c]
     [sandbox-null.c]
     rename sandbox.h => ssh-sandbox.h to make things easier for portable
 - (djm) [sandbox-null.c] Dummy sandbox for platforms that don't support
   setrlimit(2)

20110620
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/06/04 00:10:26
     [ssh_config.5]
     explain IdentifyFile's semantics a little better, prompted by bz#1898
     ok dtucker jmc
   - markus@cvs.openbsd.org 2011/06/14 22:49:18
     [authfile.c]
     make sure key_parse_public/private_rsa1() no longer consumes its input
     buffer.  fixes ssh-add for passphrase-protected ssh1-keys;
     noted by naddy@; ok djm@
   - djm@cvs.openbsd.org 2011/06/17 21:44:31
     [log.c log.h monitor.c monitor.h monitor_wrap.c monitor_wrap.h sshd.c]
     make the pre-auth privsep slave log via a socketpair shared with the
     monitor rather than /var/empty/dev/log; ok dtucker@ deraadt@ markus@
   - djm@cvs.openbsd.org 2011/06/17 21:46:16
     [sftp-server.c]
     the protocol version should be unsigned; bz#1913 reported by mb AT
     smartftp.com
   - djm@cvs.openbsd.org 2011/06/17 21:47:35
     [servconf.c]
     factor out multi-choice option parsing into a parse_multistate label
     and some support structures; ok dtucker@
   - djm@cvs.openbsd.org 2011/06/17 21:57:25
     [clientloop.c]
     setproctitle for a mux master that has been gracefully stopped;
     bz#1911 from Bert.Wesarg AT googlemail.com

20110603
 - (dtucker) [README version.h contrib/caldera/openssh.spec
   contrib/redhat/openssh.spec contrib/suse/openssh.spec] Pull the version
   bumps from the 5.8p2 branch into HEAD.  ok djm.
 - (tim) [configure.ac defines.h] Run test program to detect system mail
   directory. Add --with-maildir option to override. Fixed OpenServer 6
   getting it wrong. Fixed many systems having MAIL=/var/mail//username
   ok dtucker
 - (dtucker) [monitor.c] Remove the !HAVE_SOCKETPAIR case.  We use socketpair
   unconditionally in other places and the survey data we have does not show
   any systems that use it.  "nuke it" djm@
 - (djm) [configure.ac] enable setproctitle emulation for OS X
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/06/03 00:54:38
     [ssh.c]
     bz#1883 - setproctitle() to identify mux master; patch from Bert.Wesarg
     AT googlemail.com; ok dtucker@
     NB. includes additional portability code to enable setproctitle emulation
     on platforms that don't support it.
   - dtucker@cvs.openbsd.org 2011/06/03 01:37:40
     [ssh-agent.c]
     Check current parent process ID against saved one to determine if the parent
     has exited, rather than attempting to send a zero signal, since the latter
     won't work if the parent has changed privs.  bz#1905, patch from Daniel Kahn
     Gillmor, ok djm@
    - dtucker@cvs.openbsd.org 2011/05/31 02:01:58
     [regress/dynamic-forward.sh]
     back out revs 1.6 and 1.5 since it's not reliable
   - dtucker@cvs.openbsd.org 2011/05/31 02:03:34
     [regress/dynamic-forward.sh]
     work around startup and teardown races; caught by deraadt
   - dtucker@cvs.openbsd.org 2011/06/03 00:29:52
     [regress/dynamic-forward.sh]
     Retry establishing the port forwarding after a small delay, should make
     the tests less flaky when the previous test is slow to shut down and free
     up the port.
 - (tim) [regress/cfgmatch.sh] Build/test out of tree fix.

20110529
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/05/23 03:30:07
     [auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c]
     [pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5]
     allow AuthorizedKeysFile to specify multiple files, separated by spaces.
     Bring back authorized_keys2 as a default search path (to avoid breaking
     existing users of this file), but override this in sshd_config so it will
     be no longer used on fresh installs. Maybe in 2015 we can remove it
     entierly :)
     
     feedback and ok markus@ dtucker@
   - djm@cvs.openbsd.org 2011/05/23 03:33:38
     [auth.c]
     make secure_filename() spam debug logs less
   - djm@cvs.openbsd.org 2011/05/23 03:52:55
     [sshconnect.c]
     remove extra newline
   - jmc@cvs.openbsd.org 2011/05/23 07:10:21
     [sshd.8 sshd_config.5]
     tweak previous; ok djm
   - djm@cvs.openbsd.org 2011/05/23 07:24:57
     [authfile.c]
     read in key comments for v.2 keys (though note that these are not
     passed over the agent protocol); bz#439, based on patch from binder
     AT arago.de; ok markus@
   - djm@cvs.openbsd.org 2011/05/24 07:15:47
     [readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c]
     Remove undocumented legacy options UserKnownHostsFile2 and
     GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile
     accept multiple paths per line and making their defaults include
     known_hosts2; ok markus
   - djm@cvs.openbsd.org 2011/05/23 03:31:31
     [regress/cfgmatch.sh]
     include testing of multiple/overridden AuthorizedKeysFiles
     refactor to simply daemon start/stop and get rid of racy constructs

20110520
 - (djm) [session.c] call setexeccon() before executing passwd for pw
   changes; bz#1891 reported by jchadima AT redhat.com; ok dtucker@
 - (djm) [aclocal.m4 configure.ac] since gcc-4.x ignores all -Wno-options
   options, we should corresponding -W-option when trying to determine
   whether it is accepted.  Also includes a warning fix on the program
   fragment uses (bad main() return type).
   bz#1900 and bz#1901 reported by g.esp AT free.fr; ok dtucker@
 - (djm) [servconf.c] remove leftover droppings of AuthorizedKeysFile2
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/05/15 08:09:01
     [authfd.c monitor.c serverloop.c]
     use FD_CLOEXEC consistently; patch from zion AT x96.org
   - djm@cvs.openbsd.org 2011/05/17 07:13:31
     [key.c]
     fatal() if asked to generate a legacy ECDSA cert (these don't exist)
     and fix the regress test that was trying to generate them :)
   - djm@cvs.openbsd.org 2011/05/20 00:55:02
     [servconf.c]
     the options TrustedUserCAKeys, RevokedKeysFile, AuthorizedKeysFile
     and AuthorizedPrincipalsFile were not being correctly applied in
     Match blocks, despite being overridable there; ok dtucker@
   - dtucker@cvs.openbsd.org 2011/05/20 02:00:19
     [servconf.c]
     Add comment documenting what should be after the preauth check.  ok djm
   - djm@cvs.openbsd.org 2011/05/20 03:25:45
     [monitor.c monitor_wrap.c servconf.c servconf.h]
     use a macro to define which string options to copy between configs
     for Match. This avoids problems caused by forgetting to keep three
     code locations in perfect sync and ordering
     
     "this is at once beautiful and horrible" + ok dtucker@
   - djm@cvs.openbsd.org 2011/05/17 07:13:31
     [regress/cert-userkey.sh]
     fatal() if asked to generate a legacy ECDSA cert (these don't exist)
     and fix the regress test that was trying to generate them :)
   - djm@cvs.openbsd.org 2011/05/20 02:43:36
     [cert-hostkey.sh]
     another attempt to generate a v00 ECDSA key that broke the test
     ID sync only - portable already had this somehow
   - dtucker@cvs.openbsd.org 2011/05/20 05:19:50
     [dynamic-forward.sh]
     Prevent races in dynamic forwarding test; ok djm
   - dtucker@cvs.openbsd.org 2011/05/20 06:32:30
     [dynamic-forward.sh]
     fix dumb error in dynamic-forward test

20110515
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/05/05 05:12:08
     [mux.c]
     gracefully fall back when ControlPath is too large for a
     sockaddr_un. ok markus@ as part of a larger diff
   - dtucker@cvs.openbsd.org 2011/05/06 01:03:35
     [sshd_config]
     clarify language about overriding defaults.  bz#1892, from Petr Cerny
   - djm@cvs.openbsd.org 2011/05/06 01:09:53
     [sftp.1]
     mention that IPv6 addresses must be enclosed in square brackets;
     bz#1845
   - djm@cvs.openbsd.org 2011/05/06 02:05:41
     [sshconnect2.c]
     fix memory leak; bz#1849 ok dtucker@
   - djm@cvs.openbsd.org 2011/05/06 21:14:05
     [packet.c packet.h]
     set traffic class for IPv6 traffic as we do for IPv4 TOS;
     patch from lionel AT mamane.lu via Colin Watson in bz#1855;
     ok markus@
   - djm@cvs.openbsd.org 2011/05/06 21:18:02
     [ssh.c ssh_config.5]
     add a %L expansion (short-form of the local host name) for ControlPath;
     sync some more expansions with LocalCommand; ok markus@
   - djm@cvs.openbsd.org 2011/05/06 21:31:38
     [readconf.c ssh_config.5]
     support negated Host matching, e.g.
     
     Host *.example.org !c.example.org
        User mekmitasdigoat
     
     Will match "a.example.org", "b.example.org", but not "c.example.org"
     ok markus@
   - djm@cvs.openbsd.org 2011/05/06 21:34:32
     [clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5]
     Add a RequestTTY ssh_config option to allow configuration-based
     control over tty allocation (like -t/-T); ok markus@
   - djm@cvs.openbsd.org 2011/05/06 21:38:58
     [ssh.c]
     fix dropping from previous diff
   - djm@cvs.openbsd.org 2011/05/06 22:20:10
     [PROTOCOL.mux]
     fix numbering; from bert.wesarg AT googlemail.com
   - jmc@cvs.openbsd.org 2011/05/07 23:19:39
     [ssh_config.5]
     - tweak previous
     - come consistency fixes
     ok djm
   - jmc@cvs.openbsd.org 2011/05/07 23:20:25
     [ssh.1]
     +.It RequestTTY
   - djm@cvs.openbsd.org 2011/05/08 12:52:01
     [PROTOCOL.mux clientloop.c clientloop.h mux.c]
     improve our behaviour when TTY allocation fails: if we are in
     RequestTTY=auto mode (the default), then do not treat at TTY
     allocation error as fatal but rather just restore the local TTY
     to cooked mode and continue. This is more graceful on devices that
     never allocate TTYs.
     
     If RequestTTY is set to "yes" or "force", then failure to allocate
     a TTY is fatal.
     
     ok markus@
   - djm@cvs.openbsd.org 2011/05/10 05:46:46
     [authfile.c]
     despam debug() logs by detecting that we are trying to load a private key
     in key_try_load_public() and returning early; ok markus@
   - djm@cvs.openbsd.org 2011/05/11 04:47:06
     [auth.c auth.h auth2-pubkey.c pathnames.h servconf.c servconf.h]
     remove support for authorized_keys2; it is a relic from the early days
     of protocol v.2 support and has been undocumented for many years;
     ok markus@
   - djm@cvs.openbsd.org 2011/05/13 00:05:36
     [authfile.c]
     warn on unexpected key type in key_parse_private_type()
 - (djm) [packet.c] unbreak portability #endif

20110510
 - (dtucker) [openbsd-compat/openssl-compat.{c,h}] Bug #1882: fix
   --with-ssl-engine which was broken with the change from deprecated
   SSLeay_add_all_algorithms().  ok djm

20110506
 - (dtucker) [openbsd-compat/regress/closefromtest.c] Bug #1875: add prototype
   for closefrom() in test code.  Report from Dan Wallis via Gentoo.

20110505
 - (djm) [defines.h] Move up include of netinet/ip.h for IPTOS
   definitions. From des AT des.no
 - (djm) [Makefile.in WARNING.RNG aclocal.m4 buildpkg.sh.in configure.ac]
   [entropy.c ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c]
   [ssh-keysign.c ssh-pkcs11-helper.c ssh-rand-helper.8 ssh-rand-helper.c]
   [ssh.c ssh_prng_cmds.in sshd.c contrib/aix/buildbff.sh]
   [regress/README.regress] Remove ssh-rand-helper and all its
   tentacles. PRNGd seeding has been rolled into entropy.c directly.
   Thanks to tim@ for testing on affected platforms.
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/03/10 02:52:57
     [auth2-gss.c auth2.c auth.h]
     allow GSSAPI authentication to detect when a server-side failure causes
     authentication failure and don't count such failures against MaxAuthTries;
     bz#1244 from simon AT sxw.org.uk; ok markus@ before lock
   - okan@cvs.openbsd.org 2011/03/15 10:36:02
     [ssh-keyscan.c]
     use timerclear macro
     ok djm@
   - stevesk@cvs.openbsd.org 2011/03/23 15:16:22
     [ssh-keygen.1 ssh-keygen.c]
     Add -A option.  For each of the key types (rsa1, rsa, dsa and ecdsa)
     for which host keys do not exist, generate the host keys with the
     default key file path, an empty passphrase, default bits for the key
     type, and default comment.  This will be used by /etc/rc to generate
     new host keys.  Idea from deraadt.
     ok deraadt
   - stevesk@cvs.openbsd.org 2011/03/23 16:24:56
     [ssh-keygen.1]
     -q not used in /etc/rc now so remove statement.
   - stevesk@cvs.openbsd.org 2011/03/23 16:50:04
     [ssh-keygen.c]
     remove -d, documentation removed >10 years ago; ok markus
   - jmc@cvs.openbsd.org 2011/03/24 15:29:30
     [ssh-keygen.1]
     zap trailing whitespace;
   - stevesk@cvs.openbsd.org 2011/03/24 22:14:54
     [ssh-keygen.c]
     use strcasecmp() for "clear" cert permission option also; ok djm
   - stevesk@cvs.openbsd.org 2011/03/29 18:54:17
     [misc.c misc.h servconf.c]
     print ipqos friendly string for sshd -T; ok markus
     # sshd -Tf sshd_config|grep ipqos
     ipqos lowdelay throughput
   - djm@cvs.openbsd.org 2011/04/12 04:23:50
     [ssh-keygen.c]
     fix -Wshadow
   - djm@cvs.openbsd.org 2011/04/12 05:32:49
     [sshd.c]
     exit with 0 status on SIGTERM; bz#1879
   - djm@cvs.openbsd.org 2011/04/13 04:02:48
     [ssh-keygen.1]
     improve wording; bz#1861
   - djm@cvs.openbsd.org 2011/04/13 04:09:37
     [ssh-keygen.1]
     mention valid -b sizes for ECDSA keys; bz#1862
   - djm@cvs.openbsd.org 2011/04/17 22:42:42
     [PROTOCOL.mux clientloop.c clientloop.h mux.c ssh.1 ssh.c]
     allow graceful shutdown of multiplexing: request that a mux server
     removes its listener socket and refuse future multiplexing requests;
     ok markus@
   - djm@cvs.openbsd.org 2011/04/18 00:46:05
     [ssh-keygen.c]
     certificate options are supposed to be packed in lexical order of
     option name (though we don't actually enforce this at present).
     Move one up that was out of sequence
   - djm@cvs.openbsd.org 2011/05/04 21:15:29
     [authfile.c authfile.h ssh-add.c]
     allow "ssh-add - < key"; feedback and ok markus@
 - (tim) [configure.ac] Add AC_LANG_SOURCE to OPENSSH_CHECK_CFLAG_COMPILE
   so autoreconf 2.68 is happy.
 - (tim) [defines.h] Deal with platforms that do not have S_IFSOCK ok djm@

20110221
 - (dtucker) [contrib/cygwin/ssh-host-config] From Corinna: revamp of the
   Cygwin-specific service installer script ssh-host-config.  The actual
   functionality is the same, the revisited version is just more
   exact when it comes to check for problems which disallow to run
   certain aspects of the script.  So, part of this script and the also
   rearranged service helper script library "csih" is to check if all
   the tools required to run the script are available on the system.
   The new script also is more thorough to inform the user why the
   script failed.  Patch from vinschen at redhat com.

20110218
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/02/16 00:31:14
     [ssh-keysign.c]
     make hostbased auth with ECDSA keys work correctly. Based on patch
     by harvey.eneman AT oracle.com in bz#1858; ok markus@ (pre-lock)

20110206
 - (dtucker) [openbsd-compat/port-linux.c] Bug #1851: fix syntax error in
   selinux code.  Patch from Leonardo Chiquitto 
 - (dtucker) [contrib/cygwin/ssh-{host,user}-config]  Add ECDSA key
   generation and simplify.  Patch from Corinna Vinschen.

20110204
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/01/31 21:42:15
     [PROTOCOL.mux]
     cut'n'pasto; from bert.wesarg AT googlemail.com
   - djm@cvs.openbsd.org 2011/02/04 00:44:21
     [key.c]
     fix uninitialised nonce variable; reported by Mateusz Kocielski
   - djm@cvs.openbsd.org 2011/02/04 00:44:43
     [version.h]
     openssh-5.8
 - (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
   [contrib/suse/openssh.spec] update versions in docs and spec files.
 - Release OpenSSH 5.8p1

20110128
 - (djm) [openbsd-compat/port-linux.c] Check whether SELinux is enabled
   before attempting setfscreatecon(). Check whether matchpathcon()
   succeeded before using its result. Patch from cjwatson AT debian.org;
   bz#1851

20110127
 - (tim) [config.guess config.sub] Sync with upstream.
 - (tim) [configure.ac] Consistent M4 quoting throughout, updated obsolete
   AC_TRY_COMPILE with AC_COMPILE_IFELSE, updated obsolete AC_TRY_LINK with
   AC_LINK_IFELSE, updated obsolete AC_TRY_RUN with AC_RUN_IFELSE, misc white
   space changes for consistency/readability. Makes autoconf 2.68 happy.
   "Nice work" djm

20110125
 - (djm) [configure.ac Makefile.in ssh.c openbsd-compat/port-linux.c
   openbsd-compat/port-linux.h] Move SELinux-specific code from ssh.c to
   port-linux.c to avoid compilation errors. Add -lselinux to ssh when
   building with SELinux support to avoid linking failure; report from
   amk AT spamfence.net; ok dtucker

20110122
 - (dtucker) [configure.ac openbsd-compat/openssl-compat.{c,h}] Add
   RSA_get_default_method() for the benefit of openssl versions that don't
   have it (at least openssl-engine-0.9.6b).  Found and tested by Kevin Brott,
   ok djm@.
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/01/22 09:18:53
     [version.h]
     crank to OpenSSH-5.7
 - (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
   [contrib/suse/openssh.spec] update versions in docs and spec files.
 - (djm) Release 5.7p1

20110119
 - (tim) [contrib/caldera/openssh.spec] Use CFLAGS from Makefile instead
   of RPM so build completes. Signatures were changed to .asc since 4.1p1.
 - (djm) [configure.ac] Disable ECC on OpenSSL <0.9.8g. Releases prior to
   0.9.8 lacked it, and 0.9.8a through 0.9.8d have proven buggy in pre-
   release testing (random crashes and failure to load ECC keys).
   ok dtucker@

20110117
 - (djm) [regress/Makefile] use $TEST_SSH_KEYGEN instead of the one in
   $PATH, fix cleanup of droppings; reported by openssh AT
   roumenpetrov.info; ok dtucker@
 - (djm) [regress/agent-ptrace.sh] Fix false failure on OS X by adding
   its unique snowflake of a gdb error to the ones we look for.
 - (djm) [regress/agent-getpeereid.sh] leave stdout attached when running
   ssh-add to avoid $SUDO failures on Linux
 - (dtucker) [openbsd-compat/port-linux.c] Bug #1838: Add support for the new
   Linux OOM-killer magic values that changed in 2.6.36 kernels, with fallback
   to the old values.  Feedback from vapier at gentoo org and djm, ok djm.
 - (djm) [configure.ac regress/agent-getpeereid.sh regress/multiplex.sh]
   [regress/sftp-glob.sh regress/test-exec.sh] Rework how feature tests are
   disabled on platforms that do not support them; add a "config_defined()"
   shell function that greps for defines in config.h and use them to decide
   on feature tests.
   Convert a couple of existing grep's over config.h to use the new function
   Add a define "FILESYSTEM_NO_BACKSLASH" for filesystem that can't represent
   backslash characters in filenames, enable it for Cygwin and use it to turn
   of tests for quotes backslashes in sftp-glob.sh.
   based on discussion with vinschen AT redhat.com and dtucker@; ok dtucker@
 - (tim) [regress/agent-getpeereid.sh] shell portability fix.
 - (dtucker) [openbsd-compat/port-linux.c] Fix minor bug caught by -Werror on
   the tinderbox.
 - (dtucker) [LICENCE Makefile.in audit-bsm.c audit-linux.c audit.c audit.h
   configure.ac defines.h loginrec.c]  Bug #1402: add linux audit subsystem
   support, based on patches from Tomas Mraz and jchadima at redhat.

20110116
 - (dtucker) [Makefile.in configure.ac regress/kextype.sh] Skip sha256-based
   on configurations that don't have it.
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/01/16 11:50:05
     [clientloop.c]
     Use atomicio when flushing protocol 1 std{out,err} buffers at
     session close. This was a latent bug exposed by setting a SIGCHLD
     handler and spotted by kevin.brott AT gmail.com; ok dtucker@
   - djm@cvs.openbsd.org 2011/01/16 11:50:36
     [sshconnect.c]
     reset the SIGPIPE handler when forking to execute child processes;
     ok dtucker@
   - djm@cvs.openbsd.org 2011/01/16 12:05:59
     [clientloop.c]
     a couple more tweaks to the post-close protocol 1 stderr/stdout flush:
     now that we use atomicio(), convert them from while loops to if statements
     add test and cast to compile cleanly with -Wsigned

20110114
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/01/13 21:54:53
     [mux.c]
     correct error messages; patch from bert.wesarg AT googlemail.com
   - djm@cvs.openbsd.org 2011/01/13 21:55:25
     [PROTOCOL.mux]
     correct protocol names and add a couple of missing protocol number
     defines; patch from bert.wesarg AT googlemail.com
 - (djm) [Makefile.in] Use shell test to disable ecdsa key generating in
   host-key-force target rather than a substitution that is replaced with a
   comment so that the Makefile.in is still a syntactically valid Makefile
   (useful to run the distprep target)
 - (tim) [regress/cert-hostkey.sh] Typo. Missing $ on variable name.
 - (tim) [regress/cert-hostkey.sh] Add missing TEST_SSH_ECC guard around some
   ecdsa bits.

20110113
 - (djm) [misc.c] include time.h for nanosleep() prototype
 - (tim) [Makefile.in] test the ECC bits if we have the capability. ok djm
 - (tim) [Makefile.in configure.ac opensshd.init.in] Add support for generating
   ecdsa keys. ok djm.
 - (djm) [entropy.c] cast OPENSSL_VERSION_NUMBER to u_long to avoid
   gcc warning on platforms where it defaults to int
 - (djm) [regress/Makefile] add a few more generated files to the clean
   target
 - (djm) [myproposal.h] Fix reversed OPENSSL_VERSION_NUMBER test and bad
   #define that was causing diffie-hellman-group-exchange-sha256 to be
   incorrectly disabled
 - (djm) [regress/kextype.sh] Testing diffie-hellman-group-exchange-sha256
   should not depend on ECC support

20110112
 - OpenBSD CVS Sync
   - nicm@cvs.openbsd.org 2010/10/08 21:48:42
     [openbsd-compat/glob.c]
     Extend GLOB_LIMIT to cover readdir and stat and bump the malloc limit
     from ARG_MAX to 64K.
     Fixes glob-using programs (notably ftp) able to be triggered to hit
     resource limits.
     Idea from a similar NetBSD change, original problem reported by jasper@.
     ok millert tedu jasper
   - djm@cvs.openbsd.org 2011/01/12 01:53:14
     avoid some integer overflows mostly with GLOB_APPEND and GLOB_DOOFFS
     and sanity check arguments (these will be unnecessary when we switch
     struct glob members from being type into to size_t in the future);
     "looks ok" tedu@ feedback guenther@
 - (djm) [configure.ac] Turn on -Wno-unused-result for gcc >= 4.4 to avoid
   silly warnings on write() calls we don't care succeed or not.
 - (djm) [configure.ac] Fix broken test for gcc >= 4.4 with per-compiler
   flag tests that don't depend on gcc version at all; suggested by and
   ok dtucker@

20110111
 - (tim) [regress/host-expand.sh] Fix for building outside of read only
   source tree.
 - (djm) [platform.c] Some missing includes that show up under -Werror
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2011/01/08 10:51:51
     [clientloop.c]
     use host and not options.hostname, as the latter may have unescaped
     substitution characters
   - djm@cvs.openbsd.org 2011/01/11 06:06:09
     [sshlogin.c]
     fd leak on error paths; from zinovik@
     NB. Id sync only; we use loginrec.c that was also audited and fixed
     recently
   - djm@cvs.openbsd.org 2011/01/11 06:13:10
     [clientloop.c ssh-keygen.c sshd.c]
     some unsigned long long casts that make things a bit easier for
     portable without resorting to dropping PRIu64 formats everywhere

20110109
 - (djm) [Makefile.in] list ssh_host_ecdsa key in PATHSUBS; spotted by
   openssh AT roumenpetrov.info

20110108
 - (djm) [regress/keytype.sh] s/echo -n/echon/ to repair failing regress
   test on OSX and others. Reported by imorgan AT nas.nasa.gov

20110107
 - (djm) [regress/cert-hostkey.sh regress/cert-userkey.sh] fix shell test
   for no-ECC case. Patch from cristian.ionescu-idbohrn AT axis.com
   - djm@cvs.openbsd.org 2011/01/06 22:23:53
     [ssh.c]
     unbreak %n expansion in LocalCommand; patch from bert.wesarg AT
     googlemail.com; ok markus@
   - djm@cvs.openbsd.org 2011/01/06 22:23:02
     [clientloop.c]
     when exiting due to ServerAliveTimeout, mention the hostname that caused
     it (useful with backgrounded controlmaster)
   - djm@cvs.openbsd.org 2011/01/06 22:46:21
     [regress/Makefile regress/host-expand.sh]
     regress test for LocalCommand %n expansion from bert.wesarg AT
     googlemail.com; ok markus@
   - djm@cvs.openbsd.org 2011/01/06 23:01:35
     [sshconnect.c]
     reset SIGCHLD handler to SIG_DFL when execuring LocalCommand;
     ok markus@

20110106
 - (djm) OpenBSD CVS Sync
   - markus@cvs.openbsd.org 2010/12/08 22:46:03
     [scp.1 scp.c]
     add a new -3 option to scp: Copies between two remote hosts are
     transferred through the local host.  Without this option the data
     is copied directly between the two remote hosts. ok djm@ (bugzilla #1837)
   - jmc@cvs.openbsd.org 2010/12/09 14:13:33
     [scp.1 scp.c]
     scp.1: grammer fix
     scp.c: add -3 to usage()
   - markus@cvs.openbsd.org 2010/12/14 11:59:06
     [sshconnect.c]
     don't mention key type in key-changed-warning, since we also print
     this warning if a new key type appears. ok djm@
   - djm@cvs.openbsd.org 2010/12/15 00:49:27
     [readpass.c]
     fix ControlMaster=ask regression
     reset SIGCHLD handler before fork (and restore it after) so we don't miss
     the the askpass child's exit status. Correct test for exit status/signal to
     account for waitpid() failure; with claudio@ ok claudio@ markus@
   - djm@cvs.openbsd.org 2010/12/24 21:41:48
     [auth-options.c]
     don't send the actual forced command in a debug message; ok markus deraadt
   - otto@cvs.openbsd.org 2011/01/04 20:44:13
     [ssh-keyscan.c]
     handle ecdsa-sha2 with various key lengths; hint and ok djm@

20110104
 - (djm) [configure.ac Makefile.in] Use mandoc as preferred manpage
   formatter if it is present, followed by nroff and groff respectively.
   Fixes distprep target on OpenBSD (which has bumped groff/nroff to ports
   in favour of mandoc). feedback and ok tim

20110103
 - (djm) [Makefile.in] revert local hack I didn't intend to commit

20110102
 - (djm) [loginrec.c] Fix some fd leaks on error paths. ok dtucker
 - (djm) [configure.ac] Check whether libdes is needed when building
   with Heimdal krb5 support. On OpenBSD this library no longer exists,
   so linking it unconditionally causes a build failure; ok dtucker

20101226
 - (dtucker) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/12/08 04:02:47
     [ssh_config.5 sshd_config.5]
     explain that IPQoS arguments are separated by whitespace; iirc requested
     by jmc@ a while back

20101205
 - (dtucker) openbsd-compat/openssl-compat.c] remove sleep leftover from
   debugging.  Spotted by djm.
 - (dtucker) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/12/03 23:49:26
     [schnorr.c]
     check that g^x^q === 1 mod p; recommended by JPAKE author Feng Hao
     (this code is still disabled, but apprently people are treating it as
     a reference implementation)
   - djm@cvs.openbsd.org 2010/12/03 23:55:27
     [auth-rsa.c]
     move check for revoked keys to run earlier (in auth_rsa_key_allowed)
     bz#1829; patch from ldv AT altlinux.org; ok markus@
   - djm@cvs.openbsd.org 2010/12/04 00:18:01
     [sftp-server.c sftp.1 sftp-client.h sftp.c PROTOCOL sftp-client.c]
     add a protocol extension to support a hard link operation. It is
     available through the "ln" command in the client. The old "ln"
     behaviour of creating a symlink is available using its "-s" option
     or through the preexisting "symlink" command; based on a patch from
     miklos AT szeredi.hu in bz#1555; ok markus@
   - djm@cvs.openbsd.org 2010/12/04 13:31:37
     [hostfile.c]
     fix fd leak; spotted and ok dtucker
   - djm@cvs.openbsd.org 2010/12/04 00:21:19
     [regress/sftp-cmds.sh]
     adjust for hard-link support
 - (dtucker) [regress/Makefile] Id sync.

20101204
 - (djm) [openbsd-compat/bindresvport.c] Use arc4random_uniform(range)
   instead of (arc4random() % range)
 - (dtucker) [configure.ac moduli.c openbsd-compat/openssl-compat.{c,h}]  Add
   shims for the new, non-deprecated OpenSSL key generation functions for
   platforms that don't have the new interfaces.

20101201
 - OpenBSD CVS Sync
   - deraadt@cvs.openbsd.org 2010/11/20 05:12:38
     [auth2-pubkey.c]
     clean up cases of ;;
   - djm@cvs.openbsd.org 2010/11/21 01:01:13
     [clientloop.c misc.c misc.h ssh-agent.1 ssh-agent.c]
     honour $TMPDIR for client xauth and ssh-agent temporary directories;
     feedback and ok markus@
   - djm@cvs.openbsd.org 2010/11/21 10:57:07
     [authfile.c]
     Refactor internals of private key loading and saving to work on memory
     buffers rather than directly on files. This will make a few things
     easier to do in the future; ok markus@
   - djm@cvs.openbsd.org 2010/11/23 02:35:50
     [auth.c]
     use strict_modes already passed as function argument over referencing
     global options.strict_modes
   - djm@cvs.openbsd.org 2010/11/23 23:57:24
     [clientloop.c]
     avoid NULL deref on receiving a channel request on an unknown or invalid
     channel; report bz#1842 from jchadima AT redhat.com; ok dtucker@
   - djm@cvs.openbsd.org 2010/11/24 01:24:14
     [channels.c]
     remove a debug() that pollutes stderr on client connecting to a server
     in debug mode (channel_close_fds is called transitively from the session
     code post-fork); bz#1719, ok dtucker
   - djm@cvs.openbsd.org 2010/11/25 04:10:09
     [session.c]
     replace close() loop for fds 3->64 with closefrom();
     ok markus deraadt dtucker
   - djm@cvs.openbsd.org 2010/11/26 05:52:49
     [scp.c]
     Pass through ssh command-line flags and options when doing remote-remote
     transfers, e.g. to enable agent forwarding which is particularly useful
     in this case; bz#1837 ok dtucker@
   - markus@cvs.openbsd.org 2010/11/29 18:57:04
     [authfile.c]
     correctly load comment for encrypted rsa1 keys;
     report/fix Joachim Schipper; ok djm@
   - djm@cvs.openbsd.org 2010/11/29 23:45:51
     [auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c]
     [sshconnect.h sshconnect2.c]
     automatically order the hostkeys requested by the client based on
     which hostkeys are already recorded in known_hosts. This avoids
     hostkey warnings when connecting to servers with new ECDSA keys
     that are preferred by default; with markus@

20101124
 - (dtucker) [platform.c session.c] Move the getluid call out of session.c and
   into the platform-specific code  Only affects SCO, tested by and ok tim@.
 - (djm) [loginrec.c] Relax permission requirement on btmp logs to allow
   group read/write. ok dtucker@
 - (dtucker) [packet.c] Remove redundant local declaration of "int tos".
 - (djm) [defines.h] Add IP DSCP defines

20101122
 - (dtucker) Bug #1840: fix warning when configuring --with-ssl-engine, patch
   from vapier at gentoo org.

20101120
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/11/05 02:46:47
     [packet.c]
     whitespace KNF
   - djm@cvs.openbsd.org 2010/11/10 01:33:07
     [kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c moduli.c]
     use only libcrypto APIs that are retained with OPENSSL_NO_DEPRECATED.
     these have been around for years by this time. ok markus
   - djm@cvs.openbsd.org 2010/11/13 23:27:51
     [clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
     [servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
     allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
     hardcoding lowdelay/throughput.
     
     bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
   - jmc@cvs.openbsd.org 2010/11/15 07:40:14
     [ssh_config.5]
     libary -> library;
   - jmc@cvs.openbsd.org 2010/11/18 15:01:00
     [scp.1 sftp.1 ssh.1 sshd_config.5]
     add IPQoS to the various -o lists, and zap some trailing whitespace;

20101111
 - (djm) [servconf.c ssh-add.c ssh-keygen.c] don't look for ECDSA keys on
   platforms that don't support ECC. Fixes some spurious warnings reported
   by tim@

20101109
 - (tim) [regress/kextype.sh] Not all platforms have time in /usr/bin.
   Feedback from dtucker@
 - (tim) [configure.ac openbsd-compat/bsd-misc.h openbsd-compat/bsd-misc.c] Add
   support for platforms missing isblank(). ok djm@

20101108
 - (tim) [regress/Makefile] Fixes to allow building/testing outside source
   tree.
 - (tim) [regress/kextype.sh] Shell portability fix.

20101107
 - (dtucker) [platform.c] includes.h instead of defines.h so that we get
   the correct typedefs.

20101105
 - (djm) [loginrec.c loginrec.h] Use correct uid_t/pid_t types instead of
   int. Should fix bz#1817 cleanly; ok dtucker@
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/09/22 12:26:05
     [regress/Makefile regress/kextype.sh]
     regress test for each of the key exchange algorithms that we support
   - djm@cvs.openbsd.org 2010/10/28 11:22:09
     [authfile.c key.c key.h ssh-keygen.c]
     fix a possible NULL deref on loading a corrupt ECDH key
     
     store ECDH group information in private keys files as "named groups"
     rather than as a set of explicit group parameters (by setting
     the OPENSSL_EC_NAMED_CURVE flag). This makes for shorter key files and
     retrieves the group's OpenSSL NID that we need for various things.
   - jmc@cvs.openbsd.org 2010/10/28 18:33:28
     [scp.1 ssh-add.1 ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5]
     knock out some "-*- nroff -*-" lines;
   - djm@cvs.openbsd.org 2010/11/04 02:45:34
     [sftp-server.c]
     umask should be parsed as octal. reported by candland AT xmission.com;
     ok markus@
 - (dtucker) [configure.ac platform.{c,h} session.c
   openbsd-compat/port-solaris.{c,h}] Bug #1824: Add Solaris Project support.
   Patch from cory.erickson at csu mnscu edu with a bit of rework from me.
   ok djm@
 - (dtucker) [platform.c platform.h session.c] Add a platform hook to run
   after the user's groups are established and move the selinux calls into it.
 - (dtucker) [platform.c session.c] Move the AIX setpcred+chroot hack into
   platform.c
 - (dtucker) [platform.c session.c] Move the BSDI setpgrp into platform.c.
 - (dtucker) [platform.c] Only call setpgrp on BSDI if running as root to
   retain previous behavior.
 - (dtucker) [platform.c session.c] Move the PAM credential establishment for
   the LOGIN_CAP case into platform.c.
 - (dtucker) platform.c session.c] Move the USE_LIBIAF fragment into
   platform.c
 - (dtucker) [platform.c session.c] Move aix_usrinfo frament into platform.c.
 - (dtucker) [platform.c session.c] Move irix setusercontext fragment into
   platform.c.
 - (dtucker) [platform.c session.c] Move PAM credential establishment for the
   non-LOGIN_CAP case into platform.c.
 - (dtucker) [platform.c platform.h session.c] Move the Cygwin special-case
   check into platform.c
 - (dtucker) [regress/keytype.sh] Import new test.
 - (dtucker) [Makefile configure.ac regress/Makefile regress/keytype.sh]
   Import recent changes to regress/Makefile, pass a flag to enable ECC tests
   from configure through to regress/Makefile and use it in the tests.
 - (dtucker) [regress/kextype.sh] Add missing "test".
 - (dtucker) [regress/kextype.sh] Make sha256 test depend on ECC.  This is not
   strictly correct since while ECC requires sha256 the reverse is not true
   however it does prevent spurious test failures.
 - (dtucker) [platform.c] Need servconf.h and extern options.

20101025
 - (tim) [openbsd-compat/glob.h] Remove sys/cdefs.h include that came with
   1.12 to unbreak Solaris build.
   ok djm@
 - (dtucker) [defines.h] Use SIZE_T_MAX for SIZE_MAX for platforms that have a
   native one.

20101024
 - (dtucker) [includes.h] Add missing ifdef GLOB_HAS_GL_STATV to fix build.
 - (dtucker) [regress/cert-hostkey.sh] Disable ECC-based tests on platforms
   which don't have ECC support in libcrypto.
 - (dtucker) [regress/cert-userkey.sh] Disable ECC-based tests on platforms
   which don't have ECC support in libcrypto.
 - (dtucker) [defines.h] Add SIZE_MAX for the benefit of platforms that don't
   have it.
 - (dtucker) OpenBSD CVS Sync
   - sthen@cvs.openbsd.org 2010/10/23 22:06:12
     [sftp.c]
     escape '[' in filename tab-completion; fix a type while there.
     ok djm@

20101021
 - OpenBSD CVS Sync
   - dtucker@cvs.openbsd.org 2010/10/12 02:22:24
     [mux.c]
     Typo in confirmation message.  bz#1827, patch from imorgan at
     nas nasa gov
   - djm@cvs.openbsd.org 2010/08/31 12:24:09
     [regress/cert-hostkey.sh regress/cert-userkey.sh]
     tests for ECDSA certificates

20101011
 - (djm) [canohost.c] Zero a4 instead of addr to better match type.
   bz#1825, reported by foo AT mailinator.com
 - (djm) [sshconnect.c] Need signal.h for prototype for kill(2)

20101011
 - (djm) [configure.ac] Use = instead of == in shell tests. Patch from
   dr AT vasco.com

20101007
 - (djm) [ssh-agent.c] Fix type for curve name.
 - (djm) OpenBSD CVS Sync
   - matthew@cvs.openbsd.org 2010/09/24 13:33:00
     [misc.c misc.h configure.ac openbsd-compat/openbsd-compat.h]
     [openbsd-compat/timingsafe_bcmp.c]
     Add timingsafe_bcmp(3) to libc, mention that it's already in the
     kernel in kern(9), and remove it from OpenSSH.
     ok deraadt@, djm@
     NB. re-added under openbsd-compat/ for portable OpenSSH
   - djm@cvs.openbsd.org 2010/09/25 09:30:16
     [sftp.c configure.ac openbsd-compat/glob.c openbsd-compat/glob.h]
     make use of new glob(3) GLOB_KEEPSTAT extension to save extra server
     rountrips to fetch per-file stat(2) information.
     NB. update openbsd-compat/ glob(3) implementation from OpenBSD libc to
     match.
   - djm@cvs.openbsd.org 2010/09/26 22:26:33
     [sftp.c]
     when performing an "ls" in columnated (short) mode, only call
     ioctl(TIOCGWINSZ) once to get the window width instead of per-
     filename
   - djm@cvs.openbsd.org 2010/09/30 11:04:51
     [servconf.c]
     prevent free() of string in .rodata when overriding AuthorizedKeys in
     a Match block; patch from rein AT basefarm.no
   - djm@cvs.openbsd.org 2010/10/01 23:05:32
     [cipher-3des1.c cipher-bf1.c cipher-ctr.c openbsd-compat/openssl-compat.h]
     adapt to API changes in openssl-1.0.0a
     NB. contains compat code to select correct API for older OpenSSL
   - djm@cvs.openbsd.org 2010/10/05 05:13:18
     [sftp.c sshconnect.c]
     use default shell /bin/sh if $SHELL is ""; ok markus@
   - djm@cvs.openbsd.org 2010/10/06 06:39:28
     [clientloop.c ssh.c sshconnect.c sshconnect.h]
     kill proxy command on fatal() (we already kill it on clean exit);
     ok markus@
   - djm@cvs.openbsd.org 2010/10/06 21:10:21
     [sshconnect.c]
     swapped args to kill(2)
 - (djm) [openbsd-compat/glob.c] restore ARG_MAX compat code.
 - (djm) [cipher-acss.c] Add missing header.
 - (djm) [openbsd-compat/Makefile.in] Actually link timingsafe_bcmp

20100924
 - (djm) OpenBSD CVS Sync
   - naddy@cvs.openbsd.org 2010/09/10 15:19:29
     [ssh-keygen.1]
     * mention ECDSA in more places
     * less repetition in FILES section
     * SSHv1 keys are still encrypted with 3DES
     help and ok jmc@
   - djm@cvs.openbsd.org 2010/09/11 21:44:20
     [ssh.1]
     mention RFC 5656 for ECC stuff
   - jmc@cvs.openbsd.org 2010/09/19 21:30:05
     [sftp.1]
     more wacky macro fixing;
   - djm@cvs.openbsd.org 2010/09/20 04:41:47
     [ssh.c]
     install a SIGCHLD handler to reap expiried child process; ok markus@
   - djm@cvs.openbsd.org 2010/09/20 04:50:53
     [jpake.c schnorr.c]
     check that received values are smaller than the group size in the
     disabled and unfinished J-PAKE code.
     avoids catastrophic security failure found by Sebastien Martini
   - djm@cvs.openbsd.org 2010/09/20 04:54:07
     [jpake.c]
     missing #include
   - djm@cvs.openbsd.org 2010/09/20 07:19:27
     [mux.c]
     "atomically" create the listening mux socket by binding it on a temorary
     name and then linking it into position after listen() has succeeded.
     this allows the mux clients to determine that the server socket is
     either ready or stale without races. stale server sockets are now
     automatically removed
     ok deraadt
   - djm@cvs.openbsd.org 2010/09/22 05:01:30
     [kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
     [servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
     add a KexAlgorithms knob to the client and server configuration to allow
     selection of which key exchange methods are used by ssh(1) and sshd(8)
     and their order of preference.
     ok markus@
   - jmc@cvs.openbsd.org 2010/09/22 08:30:08
     [ssh.1 ssh_config.5]
     ssh.1: add kexalgorithms to the -o list
     ssh_config.5: format the kexalgorithms in a more consistent
     (prettier!) way
     ok djm
   - djm@cvs.openbsd.org 2010/09/22 22:58:51
     [atomicio.c atomicio.h misc.c misc.h scp.c sftp-client.c]
     [sftp-client.h sftp.1 sftp.c]
     add an option per-read/write callback to atomicio

     factor out bandwidth limiting code from scp(1) into a generic bandwidth
     limiter that can be attached using the atomicio callback mechanism

     add a bandwidth limit option to sftp(1) using the above
     "very nice" markus@
   - jmc@cvs.openbsd.org 2010/09/23 13:34:43
     [sftp.c]
     add [-l limit] to usage();
   - jmc@cvs.openbsd.org 2010/09/23 13:36:46
     [scp.1 sftp.1]
     add KexAlgorithms to the -o list;

20100910
 - (dtucker) [openbsd-compat/port-linux.c] Check is_selinux_enabled for exact
   return code since it can apparently return -1 under some conditions.  From
   openssh bugs werbittewas de, ok djm@
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/08/31 12:33:38
     [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
     reintroduce commit from tedu@, which I pulled out for release
     engineering:
       OpenSSL_add_all_algorithms is the name of the function we have a
       man page for, so use that.  ok djm
   - jmc@cvs.openbsd.org 2010/08/31 17:40:54
     [ssh-agent.1]
     fix some macro abuse;
   - jmc@cvs.openbsd.org 2010/08/31 21:14:58
     [ssh.1]
     small text tweak to accommodate previous;
   - naddy@cvs.openbsd.org 2010/09/01 15:21:35
     [servconf.c]
     pick up ECDSA host key by default; ok djm@
   - markus@cvs.openbsd.org 2010/09/02 16:07:25
     [ssh-keygen.c]
     permit -b 256, 384 or 521 as key size for ECDSA; ok djm@
   - markus@cvs.openbsd.org 2010/09/02 16:08:39
     [ssh.c]
     unbreak ControlPersist=yes for ControlMaster=yes; ok djm@
   - naddy@cvs.openbsd.org 2010/09/02 17:21:50
     [ssh-keygen.c]
     Switch ECDSA default key size to 256 bits, which according to RFC5656
     should still be better than our current RSA-2048 default.
     ok djm@, markus@
   - jmc@cvs.openbsd.org 2010/09/03 11:09:29
     [scp.1]
     add an EXIT STATUS section for /usr/bin;
   - jmc@cvs.openbsd.org 2010/09/04 09:38:34
     [ssh-add.1 ssh.1]
     two more EXIT STATUS sections;
   - naddy@cvs.openbsd.org 2010/09/06 17:10:19
     [sshd_config]
     add ssh_host_ecdsa_key to /etc; from Mattieu Baptiste
     <mattieu.b@gmail.com>
     ok deraadt@
   - djm@cvs.openbsd.org 2010/09/08 03:54:36
     [authfile.c]
     typo
   - deraadt@cvs.openbsd.org 2010/09/08 04:13:31
     [compress.c]
     work around name-space collisions some buggy compilers (looking at you
     gcc, at least in earlier versions, but this does not forgive your current
     transgressions) seen between zlib and openssl
     ok djm
   - djm@cvs.openbsd.org 2010/09/09 10:45:45
     [kex.c kex.h kexecdh.c key.c key.h monitor.c ssh-ecdsa.c]
     ECDH/ECDSA compliance fix: these methods vary the hash function they use
     (SHA256/384/512) depending on the length of the curve in use. The previous
     code incorrectly used SHA256 in all cases.
     
     This fix will cause authentication failure when using 384 or 521-bit curve
     keys if one peer hasn't been upgraded and the other has. (256-bit curve
     keys work ok). In particular you may need to specify HostkeyAlgorithms
     when connecting to a server that has not been upgraded from an upgraded
     client.
     
     ok naddy@
 - (djm) [authfd.c authfile.c bufec.c buffer.h configure.ac kex.h kexecdh.c]
   [kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c]
   [ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on
   platforms that don't have the requisite OpenSSL support. ok dtucker@
 - (dtucker) [kex.h key.c packet.h ssh-agent.c ssh.c] A few more ECC ifdefs
   for missing headers and compiler warnings.

20100831
 - OpenBSD CVS Sync
   - jmc@cvs.openbsd.org 2010/08/08 19:36:30
     [ssh-keysign.8 ssh.1 sshd.8]
     use the same template for all FILES sections; i.e. -compact/.Pp where we
     have multiple items, and .Pa for path names;
   - tedu@cvs.openbsd.org 2010/08/12 23:34:39
     [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
     OpenSSL_add_all_algorithms is the name of the function we have a man page
     for, so use that.  ok djm
   - djm@cvs.openbsd.org 2010/08/16 04:06:06
     [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
     backout previous temporarily; discussed with deraadt@
   - djm@cvs.openbsd.org 2010/08/31 09:58:37
     [auth-options.c auth1.c auth2.c bufaux.c buffer.h kex.c key.c packet.c]
     [packet.h ssh-dss.c ssh-rsa.c]
     Add buffer_get_cstring() and related functions that verify that the
     string extracted from the buffer contains no embedded \0 characters*
     This prevents random (possibly malicious) crap from being appended to
     strings where it would not be noticed if the string is used with
     a string(3) function.
     
     Use the new API in a few sensitive places.
     
     * actually, we allow a single one at the end of the string for now because
     we don't know how many deployed implementations get this wrong, but don't
     count on this to remain indefinitely.
   - djm@cvs.openbsd.org 2010/08/31 11:54:45
     [PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
     [authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
     [monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
     [ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
     [ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
     [ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
     [uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
     Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
     host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
     better performance than plain DH and DSA at the same equivalent symmetric
     key length, as well as much shorter keys.
     
     Only the mandatory sections of RFC5656 are implemented, specifically the
     three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
     ECDSA. Point compression (optional in RFC5656 is NOT implemented).
     
     Certificate host and user keys using the new ECDSA key types are supported.
     
     Note that this code has not been tested for interoperability and may be
     subject to change.
     
     feedback and ok markus@
 - (djm) [Makefile.in] Add new ECC files
 - (djm) [bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c] include
   includes.h

20100827
 - (dtucker) [contrib/redhat/sshd.init] Bug #1810: initlog is deprecated,
   remove.  Patch from martynas at venck us 

20100823
 - (djm) Release OpenSSH-5.6p1

20100816
 - (dtucker) [configure.ac openbsd-compat/Makefile.in
   openbsd-compat/openbsd-compat.h openbsd-compat/strptime.c] Add strptime to
   the compat library which helps on platforms like old IRIX.  Based on work
   by djm, tested by Tom Christensen.
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/08/12 21:49:44
     [ssh.c]
     close any extra file descriptors inherited from parent at start and
     reopen stdin/stdout to /dev/null when forking for ControlPersist.
     
     prevents tools that fork and run a captive ssh for communication from
     failing to exit when the ssh completes while they wait for these fds to
     close. The inherited fds may persist arbitrarily long if a background
     mux master has been started by ControlPersist. cvs and scp were effected
     by this.
     
     "please commit" markus@
 - (djm) [regress/README.regress] typo

20100812
 - (tim) [regress/login-timeout.sh regress/reconfigure.sh regress/reexec.sh
   regress/test-exec.sh] Under certain conditions when testing with sudo
   tests would fail because the pidfile could not be read by a regular user.
   "cat: cannot open ...../regress/pidfile: Permission denied (error 13)"
   Make sure cat is run by $SUDO.  no objection from me. djm@
 - (tim) [auth.c] add cast to quiet compiler. Change only affects SVR5 systems.

20100809
 - (djm) bz#1561: don't bother setting IFF_UP on tun(4) device if it is
   already set. Makes FreeBSD user openable tunnels useful; patch from
   richard.burakowski+ossh AT mrburak.net, ok dtucker@
 - (dtucker) bug #1530: strip trailing ":" from hostname in ssh-copy-id.
   based in part on a patch from Colin Watson, ok djm@

20100809
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/08/08 16:26:42
     [version.h]
     crank to 5.6
 - (djm) [README contrib/caldera/openssh.spec contrib/redhat/openssh.spec]
   [contrib/suse/openssh.spec] Crank version numbers

20100805
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/08/04 05:37:01
     [ssh.1 ssh_config.5 sshd.8]
     Remove mentions of weird "addr/port" alternate address format for IPv6
     addresses combinations. It hasn't worked for ages and we have supported
     the more commen "[addr]:port" format for a long time. ok jmc@ markus@
   - djm@cvs.openbsd.org 2010/08/04 05:40:39
     [PROTOCOL.certkeys ssh-keygen.c]
     tighten the rules for certificate encoding by requiring that options
     appear in lexical order and make our ssh-keygen comply. ok markus@
   - djm@cvs.openbsd.org 2010/08/04 05:42:47
     [auth.c auth2-hostbased.c authfile.c authfile.h ssh-keysign.8]
     [ssh-keysign.c ssh.c]
     enable certificates for hostbased authentication, from Iain Morgan;
     "looks ok" markus@
   - djm@cvs.openbsd.org 2010/08/04 05:49:22
     [authfile.c]
     commited the wrong version of the hostbased certificate diff; this
     version replaces some strlc{py,at} verbosity with xasprintf() at
     the request of markus@
   - djm@cvs.openbsd.org 2010/08/04 06:07:11
     [ssh-keygen.1 ssh-keygen.c]
     Support CA keys in PKCS#11 tokens; feedback and ok markus@
   - djm@cvs.openbsd.org 2010/08/04 06:08:40
     [ssh-keysign.c]
     clean for -Wuninitialized (Id sync only; portable had this change)
   - djm@cvs.openbsd.org 2010/08/05 13:08:42
     [channels.c]
     Fix a trio of bugs in the local/remote window calculation for datagram
     data channels (i.e. TunnelForward):
     
     Calculate local_consumed correctly in channel_handle_wfd() by measuring
     the delta to buffer_len(c->output) from when we start to when we finish.
     The proximal problem here is that the output_filter we use in portable
     modified the length of the dequeued datagram (to futz with the headers
     for !OpenBSD).
     
     In channel_output_poll(), don't enqueue datagrams that won't fit in the
     peer's advertised packet size (highly unlikely to ever occur) or which
     won't fit in the peer's remaining window (more likely).
     
     In channel_input_data(), account for the 4-byte string header in
     datagram packets that we accept from the peer and enqueue in c->output.
     
     report, analysis and testing 2/3 cases from wierbows AT us.ibm.com;
     "looks good" markus@

20100803
 - (dtucker) [monitor.c] Bug #1795: Initialize the values to be returned from
   PAM to sane values in case the PAM method doesn't write to them.  Spotted by
   Bitman Zhou, ok djm@.
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/07/16 04:45:30
     [ssh-keygen.c]
     avoid bogus compiler warning
   - djm@cvs.openbsd.org 2010/07/16 14:07:35
     [ssh-rsa.c]
     more timing paranoia - compare all parts of the expected decrypted
     data before returning. AFAIK not exploitable in the SSH protocol.
     "groovy" deraadt@
   - djm@cvs.openbsd.org 2010/07/19 03:16:33
     [sftp-client.c]
     bz#1797: fix swapped args in upload_dir_internal(), breaking recursive
     upload depth checks and causing verbose printing of transfers to always
     be turned on; patch from imorgan AT nas.nasa.gov
   - djm@cvs.openbsd.org 2010/07/19 09:15:12
     [clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
     add a "ControlPersist" option that automatically starts a background
     ssh(1) multiplex master when connecting. This connection can stay alive
     indefinitely, or can be set to automatically close after a user-specified
     duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but
     further hacked on by wmertens AT cisco.com, apb AT cequrux.com,
     martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
   - djm@cvs.openbsd.org 2010/07/21 02:10:58
     [misc.c]
     sync timingsafe_bcmp() with the one dempsky@ committed to sys/lib/libkern
   - dtucker@cvs.openbsd.org 2010/07/23 08:49:25
     [ssh.1]
     Ciphers is documented in ssh_config(5) these days

20100819
 - (dtucker) [contrib/ssh-copy-ud.1] Bug #1786: update ssh-copy-id.1 with more
   details about its behaviour WRT existing directories.  Patch from
   asguthrie at gmail com, ok djm.

20100716
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/07/02 04:32:44
     [misc.c]
     unbreak strdelim() skipping past quoted strings, e.g.
     AllowUsers "blah blah" blah
     was broken; report and fix in bz#1757 from bitman.zhou AT centrify.com
     ok dtucker;
   - djm@cvs.openbsd.org 2010/07/12 22:38:52
     [ssh.c]
     Make ExitOnForwardFailure work with fork-after-authentication ("ssh -f")
     for protocol 2. ok markus@
   - djm@cvs.openbsd.org 2010/07/12 22:41:13
     [ssh.c ssh_config.5]
     expand %h to the hostname in ssh_config Hostname options. While this
     sounds useless, it is actually handy for working with unqualified
     hostnames:
     
     Host *.*
        Hostname %h
     Host *
        Hostname %h.example.org
     
     "I like it" markus@
   - djm@cvs.openbsd.org 2010/07/13 11:52:06
     [auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c]
     [packet.c ssh-rsa.c]
     implement a timing_safe_cmp() function to compare memory without leaking
     timing information by short-circuiting like memcmp() and use it for
     some of the more sensitive comparisons (though nothing high-value was
     readily attackable anyway); "looks ok" markus@
   - djm@cvs.openbsd.org 2010/07/13 23:13:16
     [auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c packet.c]
     [ssh-rsa.c]
     s/timing_safe_cmp/timingsafe_bcmp/g
   - jmc@cvs.openbsd.org 2010/07/14 17:06:58
     [ssh.1]
     finally ssh synopsis looks nice again! this commit just removes a ton of
     hacks we had in place to make it work with old groff;
   - schwarze@cvs.openbsd.org 2010/07/15 21:20:38
     [ssh-keygen.1]
     repair incorrect block nesting, which screwed up indentation;
     problem reported and fix OK by jmc@

20100714
 - (tim) [contrib/redhat/openssh.spec] Bug 1796: Test for skip_x11_askpass
   (line 77) should have been for no_x11_askpass. 

20100702
 - (djm) OpenBSD CVS Sync
   - jmc@cvs.openbsd.org 2010/06/26 00:57:07
     [ssh_config.5]
     tweak previous;
   - djm@cvs.openbsd.org 2010/06/26 23:04:04
     [ssh.c]
     oops, forgot to #include <canohost.h>; spotted and patch from chl@
   - djm@cvs.openbsd.org 2010/06/29 23:15:30
     [ssh-keygen.1 ssh-keygen.c]
     allow import (-i) and export (-e) of PEM and PKCS#8 encoded keys;
     bz#1749; ok markus@
   - djm@cvs.openbsd.org 2010/06/29 23:16:46
     [auth2-pubkey.c sshd_config.5]
     allow key options (command="..." and friends) in AuthorizedPrincipals;
     ok markus@
   - jmc@cvs.openbsd.org 2010/06/30 07:24:25
     [ssh-keygen.1]
     tweak previous;
   - jmc@cvs.openbsd.org 2010/06/30 07:26:03
     [ssh-keygen.c]
     sort usage();
   - jmc@cvs.openbsd.org 2010/06/30 07:28:34
     [sshd_config.5]
     tweak previous;
   - millert@cvs.openbsd.org 2010/07/01 13:06:59
     [scp.c]
     Fix a longstanding problem where if you suspend scp at the
     password/passphrase prompt the terminal mode is not restored.
     OK djm@
   - phessler@cvs.openbsd.org 2010/06/27 19:19:56
     [regress/Makefile]
     fix how we run the tests so we can successfully use SUDO='sudo -E'
     in our env
   - djm@cvs.openbsd.org 2010/06/29 23:59:54
     [cert-userkey.sh]
     regress tests for key options in AuthorizedPrincipals

20100627
 - (tim) [openbsd-compat/port-uw.c] Reorder includes. auth-options.h now needs
   key.h.

20100626
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/05/21 05:00:36
     [misc.c]
     colon() returns char*, so s/return (0)/return NULL/
   - markus@cvs.openbsd.org 2010/06/08 21:32:19
     [ssh-pkcs11.c]
     check length of value returned  C_GetAttributValue for != 0
     from mdrtbugzilla@codefive.co.uk; bugzilla #1773; ok dtucker@
   - djm@cvs.openbsd.org 2010/06/17 07:07:30
     [mux.c]
     Correct sizing of object to be allocated by calloc(), replacing
     sizeof(state) with sizeof(*state). This worked by accident since
     the struct contained a single int at present, but could have broken
     in the future. patch from hyc AT symas.com
   - djm@cvs.openbsd.org 2010/06/18 00:58:39
     [sftp.c]
     unbreak ls in working directories that contains globbing characters in
     their pathnames. bz#1655 reported by vgiffin AT apple.com
   - djm@cvs.openbsd.org 2010/06/18 03:16:03
     [session.c]
     Missing check for chroot_director == "none" (we already checked against
     NULL); bz#1564 from Jan.Pechanec AT Sun.COM
   - djm@cvs.openbsd.org 2010/06/18 04:43:08
     [sftp-client.c]
     fix memory leak in do_realpath() error path; bz#1771, patch from
     anicka AT suse.cz
   - djm@cvs.openbsd.org 2010/06/22 04:22:59
     [servconf.c sshd_config.5]
     expose some more sshd_config options inside Match blocks:
       AuthorizedKeysFile AuthorizedPrincipalsFile
       HostbasedUsesNameFromPacketOnly PermitTunnel
     bz#1764; feedback from imorgan AT nas.nasa.gov; ok dtucker@
   - djm@cvs.openbsd.org 2010/06/22 04:32:06
     [ssh-keygen.c]
     standardise error messages when attempting to open private key
     files to include "progname: filename: error reason"
     bz#1783; ok dtucker@
   - djm@cvs.openbsd.org 2010/06/22 04:49:47
     [auth.c]
     queue auth debug messages for bad ownership or permissions on the user's
     keyfiles. These messages will be sent after the user has successfully
     authenticated (where our client will display them with LogLevel=debug).
     bz#1554; ok dtucker@
   - djm@cvs.openbsd.org 2010/06/22 04:54:30
     [ssh-keyscan.c]
     replace verbose and overflow-prone Linebuf code with read_keyfile_line()
     based on patch from joachim AT joachimschipper.nl; bz#1565; ok dtucker@
   - djm@cvs.openbsd.org 2010/06/22 04:59:12
     [session.c]
     include the user name on "subsystem request for ..." log messages;
     bz#1571; ok dtucker@
   - djm@cvs.openbsd.org 2010/06/23 02:59:02
     [ssh-keygen.c]
     fix printing of extensions in v01 certificates that I broke in r1.190
   - djm@cvs.openbsd.org 2010/06/25 07:14:46
     [channels.c mux.c readconf.c readconf.h ssh.h]
     bz#1327: remove hardcoded limit of 100 permitopen clauses and port
     forwards per direction; ok markus@ stevesk@
   - djm@cvs.openbsd.org 2010/06/25 07:20:04
     [channels.c session.c]
     bz#1750: fix requirement for /dev/null inside ChrootDirectory for
     internal-sftp accidentally introduced in r1.253 by removing the code
     that opens and dup /dev/null to stderr and modifying the channels code
     to read stderr but discard it instead; ok markus@
   - djm@cvs.openbsd.org 2010/06/25 08:46:17
     [auth1.c auth2-none.c]
     skip the initial check for access with an empty password when
     PermitEmptyPasswords=no; bz#1638; ok markus@
   - djm@cvs.openbsd.org 2010/06/25 23:10:30
     [ssh.c]
     log the hostname and address that we connected to at LogLevel=verbose
     after authentication is successful to mitigate "phishing" attacks by
     servers with trusted keys that accept authentication silently and
     automatically before presenting fake password/passphrase prompts;
     "nice!" markus@
   - djm@cvs.openbsd.org 2010/06/25 23:10:30
     [ssh.c]
     log the hostname and address that we connected to at LogLevel=verbose
     after authentication is successful to mitigate "phishing" attacks by
     servers with trusted keys that accept authentication silently and
     automatically before presenting fake password/passphrase prompts;
     "nice!" markus@

20100622
 - (djm) [loginrec.c] crank LINFO_NAMESIZE (username length) to 512
   bz#1579; ok dtucker

20100618
 - (djm) [contrib/ssh-copy-id] Update key file explicitly under ~
   rather than assuming that $CWD == $HOME. bz#1500, patch from
   timothy AT gelter.com

20100617
 - (tim) [contrib/cygwin/README] Remove a reference to the obsolete
   minires-devel package, and to add the reference to the libedit-devel
   package since CYgwin now provides libedit. Patch from Corinna Vinschen.

20100521
 - (djm) OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/05/07 11:31:26
     [regress/Makefile regress/cert-userkey.sh]
     regress tests for AuthorizedPrincipalsFile and "principals=" key option.
     feedback and ok markus@
   - djm@cvs.openbsd.org 2010/05/11 02:58:04
     [auth-rsa.c]
     don't accept certificates marked as "cert-authority" here; ok markus@
   - djm@cvs.openbsd.org 2010/05/14 00:47:22
     [ssh-add.c]
     check that the certificate matches the corresponding private key before
     grafting it on
   - djm@cvs.openbsd.org 2010/05/14 23:29:23
     [channels.c channels.h mux.c ssh.c]
     Pause the mux channel while waiting for reply from aynch callbacks.
     Prevents misordering of replies if new requests arrive while waiting.
     
     Extend channel open confirm callback to allow signalling failure
     conditions as well as success. Use this to 1) fix a memory leak, 2)
     start using the above pause mechanism and 3) delay sending a success/
     failure message on mux slave session open until we receive a reply from
     the server.
     
     motivated by and with feedback from markus@
   - markus@cvs.openbsd.org 2010/05/16 12:55:51
     [PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c]
     mux support for remote forwarding with dynamic port allocation,
     use with
        LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost`
     feedback and ok djm@
   - djm@cvs.openbsd.org 2010/05/20 11:25:26
     [auth2-pubkey.c]
     fix logspam when key options (from="..." especially) deny non-matching
     keys; reported by henning@ also bz#1765; ok markus@ dtucker@
   - djm@cvs.openbsd.org 2010/05/20 23:46:02
     [PROTOCOL.certkeys auth-options.c ssh-keygen.c]
     Move the permit-* options to the non-critical "extensions" field for v01
     certificates. The logic is that if another implementation fails to
     implement them then the connection just loses features rather than fails
     outright.
     
     ok markus@

20100511
 - (dtucker) [Makefile.in] Bug #1770: Link libopenbsd-compat twice to solve
   circular dependency problem on old or odd platforms.  From Tom Lane, ok
   djm@.
 - (djm) [openbsd-compat/openssl-compat.h] Fix build breakage on older
   libcrypto by defining OPENSSL_[DR]SA_MAX_MODULUS_BITS if they aren't
   already. ok dtucker@

20100510
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/04/23 01:47:41
     [ssh-keygen.c]
     bz#1740: display a more helpful error message when $HOME is
     inaccessible while trying to create .ssh directory. Based on patch
     from jchadima AT redhat.com; ok dtucker@
   - djm@cvs.openbsd.org 2010/04/23 22:27:38
     [mux.c]
     set "detach_close" flag when registering channel cleanup callbacks.
     This causes the channel to close normally when its fds close and
     hangs when terminating a mux slave using ~. bz#1758; ok markus@
   - djm@cvs.openbsd.org 2010/04/23 22:42:05
     [session.c]
     set stderr to /dev/null for subsystems rather than just closing it.
     avoids hangs if a subsystem or shell initialisation writes to stderr.
     bz#1750; ok markus@
   - djm@cvs.openbsd.org 2010/04/23 22:48:31
     [ssh-keygen.c]
     refuse to generate keys longer than OPENSSL_[RD]SA_MAX_MODULUS_BITS,
     since we would refuse to use them anyway. bz#1516; ok dtucker@
   - djm@cvs.openbsd.org 2010/04/26 22:28:24
     [sshconnect2.c]
     bz#1502: authctxt.success is declared as an int, but passed by
     reference to function that accepts sig_atomic_t*. Convert it to
     the latter; ok markus@ dtucker@
   - djm@cvs.openbsd.org 2010/05/01 02:50:50
     [PROTOCOL.certkeys]
     typo; jmeltzer@
   - dtucker@cvs.openbsd.org 2010/05/05 04:22:09
     [sftp.c]
     restore mput and mget which got lost in the tab-completion changes.
     found by Kenneth Whitaker, ok djm@
   - djm@cvs.openbsd.org 2010/05/07 11:30:30
     [auth-options.c auth-options.h auth.c auth.h auth2-pubkey.c]
     [key.c servconf.c servconf.h sshd.8 sshd_config.5]
     add some optional indirection to matching of principal names listed
     in certificates. Currently, a certificate must include the a user's name
     to be accepted for authentication. This change adds the ability to
     specify a list of certificate principal names that are acceptable.
     
     When authenticating using a CA trusted through ~/.ssh/authorized_keys,
     this adds a new principals="name1[,name2,...]" key option.
     
     For CAs listed through sshd_config's TrustedCAKeys option, a new config
     option "AuthorizedPrincipalsFile" specifies a per-user file containing
     the list of acceptable names.
     
     If either option is absent, the current behaviour of requiring the
     username to appear in principals continues to apply.
     
     These options are useful for role accounts, disjoint account namespaces
     and "user@realm"-style naming policies in certificates.
     
     feedback and ok markus@
   - jmc@cvs.openbsd.org 2010/05/07 12:49:17
     [sshd_config.5]
     tweak previous;

20100423
 - (dtucker) [configure.ac] Bug #1756: Check for the existence of a lib64 dir
   in the openssl install directory (some newer openssl versions do this on at
   least some amd64 platforms).

20100418
 - OpenBSD CVS Sync
   - jmc@cvs.openbsd.org 2010/04/16 06:45:01
     [ssh_config.5]
     tweak previous; ok djm
   - jmc@cvs.openbsd.org 2010/04/16 06:47:04
     [ssh-keygen.1 ssh-keygen.c]
     tweak previous; ok djm
   - djm@cvs.openbsd.org 2010/04/16 21:14:27
     [sshconnect.c]
     oops, %r => remote username, not %u
   - djm@cvs.openbsd.org 2010/04/16 01:58:45
     [regress/cert-hostkey.sh regress/cert-userkey.sh]
     regression tests for v01 certificate format
     includes interop tests for v00 certs
 - (dtucker) [contrib/aix/buildbff.sh] Fix creation of ssh_prng_cmds.default
   file.

20100416
 - (djm) Release openssh-5.5p1
 - OpenBSD CVS Sync
   - djm@cvs.openbsd.org 2010/03/26 03:13:17
     [bufaux.c]
     allow buffer_get_int_ret/buffer_get_int64_ret to take a NULL pointer
     argument to allow skipping past values in a buffer
   - jmc@cvs.openbsd.org 2010/03/26 06:54:36
     [ssh.1]
     tweak previous;
   - jmc@cvs.openbsd.org 2010/03/27 14:26:55
     [ssh_config.5]
     tweak previous; ok dtucker
   - djm@cvs.openbsd.org 2010/04/10 00:00:16
     [ssh.c]
     bz#1746 - suppress spurious tty warning when using -O and stdin
     is not a tty; ok dtucker@ markus@
   - djm@cvs.openbsd.org 2010/04/10 00:04:30
     [sshconnect.c]
     fix terminology: we didn't find a certificate in known_hosts, we found
     a CA key
   - djm@cvs.openbsd.org 2010/04/10 02:08:44
     [clientloop.c]
     bz#1698: kill channel when pty allocation requests fail. Fixed
     stuck client if the server refuses pty allocation.
     ok dtucker@ "think so" markus@
   - djm@cvs.openbsd.org 2010/04/10 02:10:56
     [sshconnect2.c]
     show the key type that we are offering in debug(), helps distinguish
     between certs and plain keys as the path to the private key is usually
     the same.
   - djm@cvs.openbsd.org 2010/04/10 05:48:16
     [mux.c]
     fix NULL dereference; from matthew.haub AT alumni.adelaide.edu.au
   - djm@cvs.openbsd.org 2010/04/14 22:27:42
     [ssh_config.5 sshconnect.c]
     expand %r => remote username in ssh_config:ProxyCommand;
     ok deraadt markus
   - markus@cvs.openbsd.org 2010/04/15 20:32:55
     [ssh-pkcs11.c]
     retry lookup for private key if there's no matching key with CKA_SIGN
     attribute enabled; this fixes fixes MuscleCard support (bugzilla #1736)
     ok djm@
   - djm@cvs.openbsd.org 2010/04/16 01:47:26
     [PROTOCOL.certkeys auth-options.c auth-options.h auth-rsa.c]
     [auth2-pubkey.c authfd.c key.c key.h myproposal.h ssh-add.c]
     [ssh-agent.c ssh-dss.c ssh-keygen.1 ssh-keygen.c ssh-rsa.c]
     [sshconnect.c sshconnect2.c sshd.c]
     revised certificate format ssh-{dss,rsa}-cert-v01@openssh.com with the
     following changes:
     
     move the nonce field to the beginning of the certificate where it can
     better protect against chosen-prefix attacks on the signature hash
     
     Rename "constraints" field to "critical options"
     
     Add a new non-critical "extensions" field
     
     Add a serial number
     
     The older format is still support for authentication and cert generation
     (use "ssh-keygen -t v00 -s ca_key ..." to generate a v00 certificate)
     
     ok markus@