/* Return the initial module search path. */

#include "Python.h"
#include "osdefs.h"

#include <sys/types.h>
#include <string.h>

#ifdef __APPLE__
#include <mach-o/dyld.h>
#endif

/* Search in some common locations for the associated Python libraries.
 *
 * Two directories must be found, the platform independent directory
 * (prefix), containing the common .py and .pyc files, and the platform
 * dependent directory (exec_prefix), containing the shared library
 * modules.  Note that prefix and exec_prefix can be the same directory,
 * but for some installations, they are different.
 *
 * Py_GetPath() carries out separate searches for prefix and exec_prefix.
 * Each search tries a number of different locations until a ``landmark''
 * file or directory is found.  If no prefix or exec_prefix is found, a
 * warning message is issued and the preprocessor defined PREFIX and
 * EXEC_PREFIX are used (even though they will not work); python carries on
 * as best as is possible, but most imports will fail.
 *
 * Before any searches are done, the location of the executable is
 * determined.  If argv[0] has one or more slashes in it, it is used
 * unchanged.  Otherwise, it must have been invoked from the shell's path,
 * so we search $PATH for the named executable and use that.  If the
 * executable was not found on $PATH (or there was no $PATH environment
 * variable), the original argv[0] string is used.
 *
 * Next, the executable location is examined to see if it is a symbolic
 * link.  If so, the link is chased (correctly interpreting a relative
 * pathname if one is found) and the directory of the link target is used.
 *
 * Finally, argv0_path is set to the directory containing the executable
 * (i.e. the last component is stripped).
 *
 * With argv0_path in hand, we perform a number of steps.  The same steps
 * are performed for prefix and for exec_prefix, but with a different
 * landmark.
 *
 * Step 1. Are we running python out of the build directory?  This is
 * checked by looking for a different kind of landmark relative to
 * argv0_path.  For prefix, the landmark's path is derived from the VPATH
 * preprocessor variable (taking into account that its value is almost, but
 * not quite, what we need).  For exec_prefix, the landmark is
 * Modules/Setup.  If the landmark is found, we're done.
 *
 * For the remaining steps, the prefix landmark will always be
 * lib/python$VERSION/os.py and the exec_prefix will always be
 * lib/python$VERSION/lib-dynload, where $VERSION is Python's version
 * number as supplied by the Makefile.  Note that this means that no more
 * build directory checking is performed; if the first step did not find
 * the landmarks, the assumption is that python is running from an
 * installed setup.
 *
 * Step 2. See if the $PYTHONHOME environment variable points to the
 * installed location of the Python libraries.  If $PYTHONHOME is set, then
 * it points to prefix and exec_prefix.  $PYTHONHOME can be a single
 * directory, which is used for both, or the prefix and exec_prefix
 * directories separated by a colon.
 *
 * Step 3. Try to find prefix and exec_prefix relative to argv0_path,
 * backtracking up the path until it is exhausted.  This is the most common
 * step to succeed.  Note that if prefix and exec_prefix are different,
 * exec_prefix is more likely to be found; however if exec_prefix is a
 * subdirectory of prefix, both will be found.
 *
 * Step 4. Search the directories pointed to by the preprocessor variables
 * PREFIX and EXEC_PREFIX.  These are supplied by the Makefile but can be
 * passed in as options to the configure script.
 *
 * That's it!
 *
 * Well, almost.  Once we have determined prefix and exec_prefix, the
 * preprocessor variable PYTHONPATH is used to construct a path.  Each
 * relative path on PYTHONPATH is prefixed with prefix.  Then the directory
 * containing the shared library modules is appended.  The environment
 * variable $PYTHONPATH is inserted in front of it all.  Finally, the
 * prefix and exec_prefix globals are tweaked so they reflect the values
 * expected by other code, by stripping the "lib/python$VERSION/..." stuff
 * off.  If either points to the build directory, the globals are reset to
 * the corresponding preprocessor variables (so sys.prefix will reflect the
 * installation location, even though sys.path points into the build
 * directory).  This seems to make more sense given that currently the only
 * known use of sys.prefix and sys.exec_prefix is for the ILU installation
 * process to find the installed Python tree.
 */

#ifdef __cplusplus
 extern "C" {
#endif


#if !defined(PREFIX) || !defined(EXEC_PREFIX) || !defined(VERSION) || !defined(VPATH)
#error "PREFIX, EXEC_PREFIX, VERSION, and VPATH must be constant defined"
#endif

#ifndef LANDMARK
#define LANDMARK "os.py"
#endif

static char prefix[MAXPATHLEN+1];
static char exec_prefix[MAXPATHLEN+1];
static char progpath[MAXPATHLEN+1];
static char *module_search_path = NULL;
static char lib_python[] = "lib/python" VERSION;

static void
reduce(char *dir)
{
    size_t i = strlen(dir);
    while (i > 0 && dir[i] != SEP)
        --i;
    dir[i] = '\0';
}


static int
isfile(char *filename)          /* Is file, not directory */
{
    struct stat buf;
    if (stat(filename, &buf) != 0)
        return 0;
    if (!S_ISREG(buf.st_mode))
        return 0;
    return 1;
}


static int
ismodule(char *filename)        /* Is module -- check for .pyc/.pyo too */
{
    if (isfile(filename))
        return 1;

    /* Check for the compiled version of prefix. */
    if (strlen(filename) < MAXPATHLEN) {
        strcat(filename, Py_OptimizeFlag ? "o" : "c");
        if (isfile(filename))
            return 1;
    }
    return 0;
}


static int
isxfile(char *filename)         /* Is executable file */
{
    struct stat buf;
    if (stat(filename, &buf) != 0)
        return 0;
    if (!S_ISREG(buf.st_mode))
        return 0;
    if ((buf.st_mode & 0111) == 0)
        return 0;
    return 1;
}


static int
isdir(char *filename)                   /* Is directory */
{
    struct stat buf;
    if (stat(filename, &buf) != 0)
        return 0;
    if (!S_ISDIR(buf.st_mode))
        return 0;
    return 1;
}


/* Add a path component, by appending stuff to buffer.
   buffer must have at least MAXPATHLEN + 1 bytes allocated, and contain a
   NUL-terminated string with no more than MAXPATHLEN characters (not counting
   the trailing NUL).  It's a fatal error if it contains a string longer than
   that (callers must be careful!).  If these requirements are met, it's
   guaranteed that buffer will still be a NUL-terminated string with no more
   than MAXPATHLEN characters at exit.  If stuff is too long, only as much of
   stuff as fits will be appended.
*/
static void
joinpath(char *buffer, char *stuff)
{
    size_t n, k;
    if (stuff[0] == SEP)
        n = 0;
    else {
        n = strlen(buffer);
        if (n > 0 && buffer[n-1] != SEP && n < MAXPATHLEN)
            buffer[n++] = SEP;
    }
    if (n > MAXPATHLEN)
        Py_FatalError("buffer overflow in getpath.c's joinpath()");
    k = strlen(stuff);
    if (n + k > MAXPATHLEN)
        k = MAXPATHLEN - n;
    strncpy(buffer+n, stuff, k);
    buffer[n+k] = '\0';
}

/* copy_absolute requires that path be allocated at least
   MAXPATHLEN + 1 bytes and that p be no more than MAXPATHLEN bytes. */
static void
copy_absolute(char *path, char *p)
{
    if (p[0] == SEP)
        strcpy(path, p);
    else {
        if (!getcwd(path, MAXPATHLEN)) {
            /* unable to get the current directory */
            strcpy(path, p);
            return;
        }
        if (p[0] == '.' && p[1] == SEP)
            p += 2;
        joinpath(path, p);
    }
}

/* absolutize() requires that path be allocated at least MAXPATHLEN+1 bytes. */
static void
absolutize(char *path)
{
    char buffer[MAXPATHLEN + 1];

    if (path[0] == SEP)
        return;
    copy_absolute(buffer, path);
    strcpy(path, buffer);
}

/* search_for_prefix requires that argv0_path be no more than MAXPATHLEN
   bytes long.
*/
static int
search_for_prefix(char *argv0_path, char *home)
{
    size_t n;
    char *vpath;

    /* If PYTHONHOME is set, we believe it unconditionally */
    if (home) {
        char *delim;
        strncpy(prefix, home, MAXPATHLEN);
        delim = strchr(prefix, DELIM);
        if (delim)
            *delim = '\0';
        joinpath(prefix, lib_python);
        joinpath(prefix, LANDMARK);
        return 1;
    }

    /* Check to see if argv[0] is in the build directory */
    strcpy(prefix, argv0_path);
    joinpath(prefix, "Modules/Setup");
    if (isfile(prefix)) {
        /* Check VPATH to see if argv0_path is in the build directory. */
        vpath = VPATH;
        strcpy(prefix, argv0_path);
        joinpath(prefix, vpath);
        joinpath(prefix, "Lib");
        joinpath(prefix, LANDMARK);
        if (ismodule(prefix))
            return -1;
    }

    /* Search from argv0_path, until root is found */
    copy_absolute(prefix, argv0_path);
    do {
        n = strlen(prefix);
        joinpath(prefix, lib_python);
        joinpath(prefix, LANDMARK);
        if (ismodule(prefix))
            return 1;
        prefix[n] = '\0';
        reduce(prefix);
    } while (prefix[0]);

    /* Look at configure's PREFIX */
    strncpy(prefix, PREFIX, MAXPATHLEN);
    joinpath(prefix, lib_python);
    joinpath(prefix, LANDMARK);
    if (ismodule(prefix))
        return 1;

    /* Fail */
    return 0;
}


/* search_for_exec_prefix requires that argv0_path be no more than
   MAXPATHLEN bytes long.
*/
static int
search_for_exec_prefix(char *argv0_path, char *home)
{
    size_t n;

    /* If PYTHONHOME is set, we believe it unconditionally */
    if (home) {
        char *delim;
        delim = strchr(home, DELIM);
        if (delim)
            strncpy(exec_prefix, delim+1, MAXPATHLEN);
        else
            strncpy(exec_prefix, home, MAXPATHLEN);
        joinpath(exec_prefix, lib_python);
        joinpath(exec_prefix, "lib-dynload");
        return 1;
    }

    /* Check to see if argv[0] is in the build directory. "pybuilddir.txt"
       is written by setup.py and contains the relative path to the location
       of shared library modules. */
    strcpy(exec_prefix, argv0_path);
    joinpath(exec_prefix, "pybuilddir.txt");
    if (isfile(exec_prefix)) {
      FILE *f = fopen(exec_prefix, "r");
      if (f == NULL)
	errno = 0;
      else {
	char rel_builddir_path[MAXPATHLEN+1];
	size_t n;
	n = fread(rel_builddir_path, 1, MAXPATHLEN, f);
	rel_builddir_path[n] = '\0';
	fclose(f);
	strcpy(exec_prefix, argv0_path);
	joinpath(exec_prefix, rel_builddir_path);
	return -1;
      }
    }

    /* Search from argv0_path, until root is found */
    copy_absolute(exec_prefix, argv0_path);
    do {
        n = strlen(exec_prefix);
        joinpath(exec_prefix, lib_python);
        joinpath(exec_prefix, "lib-dynload");
        if (isdir(exec_prefix))
            return 1;
        exec_prefix[n] = '\0';
        reduce(exec_prefix);
    } while (exec_prefix[0]);

    /* Look at configure's EXEC_PREFIX */
    strncpy(exec_prefix, EXEC_PREFIX, MAXPATHLEN);
    joinpath(exec_prefix, lib_python);
    joinpath(exec_prefix, "lib-dynload");
    if (isdir(exec_prefix))
        return 1;

    /* Fail */
    return 0;
}


static void
calculate_path(void)
{
    extern char *Py_GetProgramName(void);

    static char delimiter[2] = {DELIM, '\0'};
    static char separator[2] = {SEP, '\0'};
    char *pythonpath = PYTHONPATH;
    char *rtpypath = Py_GETENV("PYTHONPATH");
    char *home = Py_GetPythonHome();
    char *path = getenv("PATH");
    char *prog = Py_GetProgramName();
    char argv0_path[MAXPATHLEN+1];
    char zip_path[MAXPATHLEN+1];
    int pfound, efound; /* 1 if found; -1 if found build directory */
    char *buf;
    size_t bufsz;
    size_t prefixsz;
    char *defpath = pythonpath;
#ifdef WITH_NEXT_FRAMEWORK
    NSModule pythonModule;
#endif
#ifdef __APPLE__
#if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_4
    uint32_t nsexeclength = MAXPATHLEN;
#else
    unsigned long nsexeclength = MAXPATHLEN;
#endif
#endif

        /* If there is no slash in the argv0 path, then we have to
         * assume python is on the user's $PATH, since there's no
         * other way to find a directory to start the search from.  If
         * $PATH isn't exported, you lose.
         */
        if (strchr(prog, SEP))
                strncpy(progpath, prog, MAXPATHLEN);
#ifdef __APPLE__
     /* On Mac OS X, if a script uses an interpreter of the form
      * "#!/opt/python2.3/bin/python", the kernel only passes "python"
      * as argv[0], which falls through to the $PATH search below.
      * If /opt/python2.3/bin isn't in your path, or is near the end,
      * this algorithm may incorrectly find /usr/bin/python. To work
      * around this, we can use _NSGetExecutablePath to get a better
      * hint of what the intended interpreter was, although this
      * will fail if a relative path was used. but in that case,
      * absolutize() should help us out below
      */
     else if(0 == _NSGetExecutablePath(progpath, &nsexeclength) && progpath[0] == SEP)
       ;
#endif /* __APPLE__ */
        else if (path) {
                while (1) {
                        char *delim = strchr(path, DELIM);

                        if (delim) {
                                size_t len = delim - path;
                                if (len > MAXPATHLEN)
                                        len = MAXPATHLEN;
                                strncpy(progpath, path, len);
                                *(progpath + len) = '\0';
                        }
                        else
                                strncpy(progpath, path, MAXPATHLEN);

                        joinpath(progpath, prog);
                        if (isxfile(progpath))
                                break;

                        if (!delim) {
                                progpath[0] = '\0';
                                break;
                        }
                        path = delim + 1;
                }
        }
        else
                progpath[0] = '\0';
        if (progpath[0] != SEP && progpath[0] != '\0')
                absolutize(progpath);
        strncpy(argv0_path, progpath, MAXPATHLEN);
        argv0_path[MAXPATHLEN] = '\0';

#ifdef WITH_NEXT_FRAMEWORK
        /* On Mac OS X we have a special case if we're running from a framework.
        ** This is because the python home should be set relative to the library,
        ** which is in the framework, not relative to the executable, which may
        ** be outside of the framework. Except when we're in the build directory...
        */
    pythonModule = NSModuleForSymbol(NSLookupAndBindSymbol("_Py_Initialize"));
    /* Use dylib functions to find out where the framework was loaded from */
    buf = (char *)NSLibraryNameForModule(pythonModule);
    if (buf != NULL) {
        /* We're in a framework. */
        /* See if we might be in the build directory. The framework in the
        ** build directory is incomplete, it only has the .dylib and a few
        ** needed symlinks, it doesn't have the Lib directories and such.
        ** If we're running with the framework from the build directory we must
        ** be running the interpreter in the build directory, so we use the
        ** build-directory-specific logic to find Lib and such.
        */
        strncpy(argv0_path, buf, MAXPATHLEN);
        reduce(argv0_path);
        joinpath(argv0_path, lib_python);
        joinpath(argv0_path, LANDMARK);
        if (!ismodule(argv0_path)) {
                /* We are in the build directory so use the name of the
                   executable - we know that the absolute path is passed */
                strncpy(argv0_path, progpath, MAXPATHLEN);
        }
        else {
                /* Use the location of the library as the progpath */
                strncpy(argv0_path, buf, MAXPATHLEN);
        }
    }
#endif

#if HAVE_READLINK
    {
        char tmpbuffer[MAXPATHLEN+1];
        int linklen = readlink(progpath, tmpbuffer, MAXPATHLEN);
        while (linklen != -1) {
            /* It's not null terminated! */
            tmpbuffer[linklen] = '\0';
            if (tmpbuffer[0] == SEP)
                /* tmpbuffer should never be longer than MAXPATHLEN,
                   but extra check does not hurt */
                strncpy(argv0_path, tmpbuffer, MAXPATHLEN);
            else {
                /* Interpret relative to progpath */
                reduce(argv0_path);
                joinpath(argv0_path, tmpbuffer);
            }
            linklen = readlink(argv0_path, tmpbuffer, MAXPATHLEN);
        }
    }
#endif /* HAVE_READLINK */

    reduce(argv0_path);
    /* At this point, argv0_path is guaranteed to be less than
       MAXPATHLEN bytes long.
    */

    if (!(pfound = search_for_prefix(argv0_path, home))) {
        if (!Py_FrozenFlag)
            fprintf(stderr,
                "Could not find platform independent libraries <prefix>\n");
        strncpy(prefix, PREFIX, MAXPATHLEN);
        joinpath(prefix, lib_python);
    }
    else
        reduce(prefix);

    strncpy(zip_path, prefix, MAXPATHLEN);
    zip_path[MAXPATHLEN] = '\0';
    if (pfound > 0) { /* Use the reduced prefix returned by Py_GetPrefix() */
        reduce(zip_path);
        reduce(zip_path);
    }
    else
        strncpy(zip_path, PREFIX, MAXPATHLEN);
    joinpath(zip_path, "lib/python00.zip");
    bufsz = strlen(zip_path);   /* Replace "00" with version */
    zip_path[bufsz - 6] = VERSION[0];
    zip_path[bufsz - 5] = VERSION[2];

    if (!(efound = search_for_exec_prefix(argv0_path, home))) {
        if (!Py_FrozenFlag)
            fprintf(stderr,
                "Could not find platform dependent libraries <exec_prefix>\n");
        strncpy(exec_prefix, EXEC_PREFIX, MAXPATHLEN);
        joinpath(exec_prefix, "lib/lib-dynload");
    }
    /* If we found EXEC_PREFIX do *not* reduce it!  (Yet.) */

    if ((!pfound || !efound) && !Py_FrozenFlag)
        fprintf(stderr,
                "Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]\n");

    /* Calculate size of return buffer.
     */
    bufsz = 0;

    if (rtpypath)
        bufsz += strlen(rtpypath) + 1;

    prefixsz = strlen(prefix) + 1;

    while (1) {
        char *delim = strchr(defpath, DELIM);

        if (defpath[0] != SEP)
            /* Paths are relative to prefix */
            bufsz += prefixsz;

        if (delim)
            bufsz += delim - defpath + 1;
        else {
            bufsz += strlen(defpath) + 1;
            break;
        }
        defpath = delim + 1;
    }

    bufsz += strlen(zip_path) + 1;
    bufsz += strlen(exec_prefix) + 1;

    /* This is the only malloc call in this file */
    buf = (char *)PyMem_Malloc(bufsz);

    if (buf == NULL) {
        /* We can't exit, so print a warning and limp along */
        fprintf(stderr, "Not enough memory for dynamic PYTHONPATH.\n");
        fprintf(stderr, "Using default static PYTHONPATH.\n");
        module_search_path = PYTHONPATH;
    }
    else {
        /* Run-time value of $PYTHONPATH goes first */
        if (rtpypath) {
            strcpy(buf, rtpypath);
            strcat(buf, delimiter);
        }
        else
            buf[0] = '\0';

        /* Next is the default zip path */
        strcat(buf, zip_path);
        strcat(buf, delimiter);

        /* Next goes merge of compile-time $PYTHONPATH with
         * dynamically located prefix.
         */
        defpath = pythonpath;
        while (1) {
            char *delim = strchr(defpath, DELIM);

            if (defpath[0] != SEP) {
                strcat(buf, prefix);
                if (prefixsz >= 2 && prefix[prefixsz - 2] != SEP &&
                    defpath[0] != (delim ? DELIM : L'\0')) {  /* not empty */
                    strcat(buf, separator);
                }
            }

            if (delim) {
                size_t len = delim - defpath + 1;
                size_t end = strlen(buf) + len;
                strncat(buf, defpath, len);
                *(buf + end) = '\0';
            }
            else {
                strcat(buf, defpath);
                break;
            }
            defpath = delim + 1;
        }
        strcat(buf, delimiter);

        /* Finally, on goes the directory for dynamic-load modules */
        strcat(buf, exec_prefix);

        /* And publish the results */
        module_search_path = buf;
    }

    /* Reduce prefix and exec_prefix to their essence,
     * e.g. /usr/local/lib/python1.5 is reduced to /usr/local.
     * If we're loading relative to the build directory,
     * return the compiled-in defaults instead.
     */
    if (pfound > 0) {
        reduce(prefix);
        reduce(prefix);
        /* The prefix is the root directory, but reduce() chopped
         * off the "/". */
        if (!prefix[0])
                strcpy(prefix, separator);
    }
    else
        strncpy(prefix, PREFIX, MAXPATHLEN);

    if (efound > 0) {
        reduce(exec_prefix);
        reduce(exec_prefix);
        reduce(exec_prefix);
        if (!exec_prefix[0])
                strcpy(exec_prefix, separator);
    }
    else
        strncpy(exec_prefix, EXEC_PREFIX, MAXPATHLEN);
}


/* External interface */

char *
Py_GetPath(void)
{
    if (!module_search_path)
        calculate_path();
    return module_search_path;
}

char *
Py_GetPrefix(void)
{
    if (!module_search_path)
        calculate_path();
    return prefix;
}

char *
Py_GetExecPrefix(void)
{
    if (!module_search_path)
        calculate_path();
    return exec_prefix;
}

char *
Py_GetProgramFullPath(void)
{
    if (!module_search_path)
        calculate_path();
    return progpath;
}


#ifdef __cplusplus
}
#endif