Move the 3k reST doc tree in place.
diff --git a/Doc/library/array.rst b/Doc/library/array.rst
new file mode 100644
index 0000000..5194edc
--- /dev/null
+++ b/Doc/library/array.rst
@@ -0,0 +1,272 @@
+
+:mod:`array` --- Efficient arrays of numeric values
+===================================================
+
+.. module:: array
+ :synopsis: Efficient arrays of uniformly typed numeric values.
+
+
+.. index:: single: arrays
+
+This module defines an object type which can efficiently represent an array of
+basic values: characters, integers, floating point numbers. Arrays are sequence
+types and behave very much like lists, except that the type of objects stored in
+them is constrained. The type is specified at object creation time by using a
+:dfn:`type code`, which is a single character. The following type codes are
+defined:
+
++-----------+----------------+-------------------+-----------------------+
+| Type code | C Type | Python Type | Minimum size in bytes |
++===========+================+===================+=======================+
+| ``'c'`` | char | character | 1 |
++-----------+----------------+-------------------+-----------------------+
+| ``'b'`` | signed char | int | 1 |
++-----------+----------------+-------------------+-----------------------+
+| ``'B'`` | unsigned char | int | 1 |
++-----------+----------------+-------------------+-----------------------+
+| ``'u'`` | Py_UNICODE | Unicode character | 2 |
++-----------+----------------+-------------------+-----------------------+
+| ``'h'`` | signed short | int | 2 |
++-----------+----------------+-------------------+-----------------------+
+| ``'H'`` | unsigned short | int | 2 |
++-----------+----------------+-------------------+-----------------------+
+| ``'i'`` | signed int | int | 2 |
++-----------+----------------+-------------------+-----------------------+
+| ``'I'`` | unsigned int | long | 2 |
++-----------+----------------+-------------------+-----------------------+
+| ``'l'`` | signed long | int | 4 |
++-----------+----------------+-------------------+-----------------------+
+| ``'L'`` | unsigned long | long | 4 |
++-----------+----------------+-------------------+-----------------------+
+| ``'f'`` | float | float | 4 |
++-----------+----------------+-------------------+-----------------------+
+| ``'d'`` | double | float | 8 |
++-----------+----------------+-------------------+-----------------------+
+
+The actual representation of values is determined by the machine architecture
+(strictly speaking, by the C implementation). The actual size can be accessed
+through the :attr:`itemsize` attribute. The values stored for ``'L'`` and
+``'I'`` items will be represented as Python long integers when retrieved,
+because Python's plain integer type cannot represent the full range of C's
+unsigned (long) integers.
+
+The module defines the following type:
+
+
+.. function:: array(typecode[, initializer])
+
+ Return a new array whose items are restricted by *typecode*, and initialized
+ from the optional *initializer* value, which must be a list, string, or iterable
+ over elements of the appropriate type.
+
+ .. versionchanged:: 2.4
+ Formerly, only lists or strings were accepted.
+
+ If given a list or string, the initializer is passed to the new array's
+ :meth:`fromlist`, :meth:`fromstring`, or :meth:`fromunicode` method (see below)
+ to add initial items to the array. Otherwise, the iterable initializer is
+ passed to the :meth:`extend` method.
+
+
+.. data:: ArrayType
+
+ Obsolete alias for :func:`array`.
+
+Array objects support the ordinary sequence operations of indexing, slicing,
+concatenation, and multiplication. When using slice assignment, the assigned
+value must be an array object with the same type code; in all other cases,
+:exc:`TypeError` is raised. Array objects also implement the buffer interface,
+and may be used wherever buffer objects are supported.
+
+The following data items and methods are also supported:
+
+
+.. attribute:: array.typecode
+
+ The typecode character used to create the array.
+
+
+.. attribute:: array.itemsize
+
+ The length in bytes of one array item in the internal representation.
+
+
+.. method:: array.append(x)
+
+ Append a new item with value *x* to the end of the array.
+
+
+.. method:: array.buffer_info()
+
+ Return a tuple ``(address, length)`` giving the current memory address and the
+ length in elements of the buffer used to hold array's contents. The size of the
+ memory buffer in bytes can be computed as ``array.buffer_info()[1] *
+ array.itemsize``. This is occasionally useful when working with low-level (and
+ inherently unsafe) I/O interfaces that require memory addresses, such as certain
+ :cfunc:`ioctl` operations. The returned numbers are valid as long as the array
+ exists and no length-changing operations are applied to it.
+
+ .. note::
+
+ When using array objects from code written in C or C++ (the only way to
+ effectively make use of this information), it makes more sense to use the buffer
+ interface supported by array objects. This method is maintained for backward
+ compatibility and should be avoided in new code. The buffer interface is
+ documented in :ref:`bufferobjects`.
+
+
+.. method:: array.byteswap()
+
+ "Byteswap" all items of the array. This is only supported for values which are
+ 1, 2, 4, or 8 bytes in size; for other types of values, :exc:`RuntimeError` is
+ raised. It is useful when reading data from a file written on a machine with a
+ different byte order.
+
+
+.. method:: array.count(x)
+
+ Return the number of occurrences of *x* in the array.
+
+
+.. method:: array.extend(iterable)
+
+ Append items from *iterable* to the end of the array. If *iterable* is another
+ array, it must have *exactly* the same type code; if not, :exc:`TypeError` will
+ be raised. If *iterable* is not an array, it must be iterable and its elements
+ must be the right type to be appended to the array.
+
+ .. versionchanged:: 2.4
+ Formerly, the argument could only be another array.
+
+
+.. method:: array.fromfile(f, n)
+
+ Read *n* items (as machine values) from the file object *f* and append them to
+ the end of the array. If less than *n* items are available, :exc:`EOFError` is
+ raised, but the items that were available are still inserted into the array.
+ *f* must be a real built-in file object; something else with a :meth:`read`
+ method won't do.
+
+
+.. method:: array.fromlist(list)
+
+ Append items from the list. This is equivalent to ``for x in list:
+ a.append(x)`` except that if there is a type error, the array is unchanged.
+
+
+.. method:: array.fromstring(s)
+
+ Appends items from the string, interpreting the string as an array of machine
+ values (as if it had been read from a file using the :meth:`fromfile` method).
+
+
+.. method:: array.fromunicode(s)
+
+ Extends this array with data from the given unicode string. The array must
+ be a type ``'u'`` array; otherwise a :exc:`ValueError` is raised. Use
+ ``array.fromstring(unicodestring.encode(enc))`` to append Unicode data to an
+ array of some other type.
+
+
+.. method:: array.index(x)
+
+ Return the smallest *i* such that *i* is the index of the first occurrence of
+ *x* in the array.
+
+
+.. method:: array.insert(i, x)
+
+ Insert a new item with value *x* in the array before position *i*. Negative
+ values are treated as being relative to the end of the array.
+
+
+.. method:: array.pop([i])
+
+ Removes the item with the index *i* from the array and returns it. The optional
+ argument defaults to ``-1``, so that by default the last item is removed and
+ returned.
+
+
+.. method:: array.read(f, n)
+
+ .. deprecated:: 1.5.1
+ Use the :meth:`fromfile` method.
+
+ Read *n* items (as machine values) from the file object *f* and append them to
+ the end of the array. If less than *n* items are available, :exc:`EOFError` is
+ raised, but the items that were available are still inserted into the array.
+ *f* must be a real built-in file object; something else with a :meth:`read`
+ method won't do.
+
+
+.. method:: array.remove(x)
+
+ Remove the first occurrence of *x* from the array.
+
+
+.. method:: array.reverse()
+
+ Reverse the order of the items in the array.
+
+
+.. method:: array.tofile(f)
+
+ Write all items (as machine values) to the file object *f*.
+
+
+.. method:: array.tolist()
+
+ Convert the array to an ordinary list with the same items.
+
+
+.. method:: array.tostring()
+
+ Convert the array to an array of machine values and return the string
+ representation (the same sequence of bytes that would be written to a file by
+ the :meth:`tofile` method.)
+
+
+.. method:: array.tounicode()
+
+ Convert the array to a unicode string. The array must be a type ``'u'`` array;
+ otherwise a :exc:`ValueError` is raised. Use ``array.tostring().decode(enc)`` to
+ obtain a unicode string from an array of some other type.
+
+
+.. method:: array.write(f)
+
+ .. deprecated:: 1.5.1
+ Use the :meth:`tofile` method.
+
+ Write all items (as machine values) to the file object *f*.
+
+When an array object is printed or converted to a string, it is represented as
+``array(typecode, initializer)``. The *initializer* is omitted if the array is
+empty, otherwise it is a string if the *typecode* is ``'c'``, otherwise it is a
+list of numbers. The string is guaranteed to be able to be converted back to an
+array with the same type and value using :func:`eval`, so long as the
+:func:`array` function has been imported using ``from array import array``.
+Examples::
+
+ array('l')
+ array('c', 'hello world')
+ array('u', u'hello \u2641')
+ array('l', [1, 2, 3, 4, 5])
+ array('d', [1.0, 2.0, 3.14])
+
+
+.. seealso::
+
+ Module :mod:`struct`
+ Packing and unpacking of heterogeneous binary data.
+
+ Module :mod:`xdrlib`
+ Packing and unpacking of External Data Representation (XDR) data as used in some
+ remote procedure call systems.
+
+ `The Numerical Python Manual <http://numpy.sourceforge.net/numdoc/HTML/numdoc.htm>`_
+ The Numeric Python extension (NumPy) defines another array type; see
+ http://numpy.sourceforge.net/ for further information about Numerical Python.
+ (A PDF version of the NumPy manual is available at
+ http://numpy.sourceforge.net/numdoc/numdoc.pdf).
+