| /*********************************************************** |
| Copyright (c) 2000, BeOpen.com. |
| Copyright (c) 1995-2000, Corporation for National Research Initiatives. |
| Copyright (c) 1990-1995, Stichting Mathematisch Centrum. |
| All rights reserved. |
| |
| See the file "Misc/COPYRIGHT" for information on usage and |
| redistribution of this file, and for a DISCLAIMER OF ALL WARRANTIES. |
| ******************************************************************/ |
| |
| /* Errno module */ |
| |
| #include "Python.h" |
| |
| /* Mac with GUSI has more errors than those in errno.h */ |
| #ifdef USE_GUSI |
| #include <sys/errno.h> |
| #endif |
| |
| /* Windows socket errors (WSA*): XXX is this the correct path ??? */ |
| #ifdef MS_WINDOWS |
| #include <winsock.h> |
| #endif |
| |
| /* |
| * Pull in the system error definitions |
| */ |
| |
| static PyMethodDef errno_methods[] = { |
| {NULL, NULL} |
| }; |
| |
| /* Helper function doing the dictionary inserting */ |
| |
| static void |
| _inscode(PyObject *d, PyObject *de, char *name, int code) |
| { |
| PyObject *u; |
| PyObject *v; |
| |
| u = PyString_FromString(name); |
| v = PyInt_FromLong((long) code); |
| |
| if (!u || !v) { |
| /* Don't bother reporting this error */ |
| PyErr_Clear(); |
| } |
| else { |
| /* insert in modules dict */ |
| PyDict_SetItem(d, u, v); |
| /* insert in errorcode dict */ |
| PyDict_SetItem(de, v, u); |
| } |
| Py_XDECREF(u); |
| Py_XDECREF(v); |
| } |
| |
| static char errno__doc__ [] = |
| "This module makes available standard errno system symbols.\n\ |
| \n\ |
| The value of each symbol is the corresponding integer value,\n\ |
| e.g., on most systems, errno.ENOENT equals the integer 2.\n\ |
| \n\ |
| The dictionary errno.errorcode maps numeric codes to symbol names,\n\ |
| e.g., errno.errorcode[2] could be the string 'ENOENT'.\n\ |
| \n\ |
| Symbols that are not relevant to the underlying system are not defined.\n\ |
| \n\ |
| To map error codes to error messages, use the function os.strerror(),\n\ |
| e.g. os.strerror(2) could return 'No such file or directory'."; |
| |
| DL_EXPORT(void) |
| initerrno(void) |
| { |
| PyObject *m, *d, *de; |
| m = Py_InitModule3("errno", errno_methods, errno__doc__); |
| d = PyModule_GetDict(m); |
| de = PyDict_New(); |
| if (de == NULL || PyDict_SetItemString(d, "errorcode", de)) |
| Py_FatalError("can't initialize errno module"); |
| |
| /* Macro so I don't have to edit each and every line below... */ |
| #define inscode(d, ds, de, name, code, comment) _inscode(d, de, name, code) |
| |
| /* |
| * The names and comments are borrowed from linux/include/errno.h, |
| * which should be pretty all-inclusive |
| */ |
| |
| #ifdef ENODEV |
| inscode(d, ds, de, "ENODEV", ENODEV, "No such device"); |
| #endif |
| #ifdef ENOCSI |
| inscode(d, ds, de, "ENOCSI", ENOCSI, "No CSI structure available"); |
| #endif |
| #ifdef EHOSTUNREACH |
| inscode(d, ds, de, "EHOSTUNREACH", EHOSTUNREACH, "No route to host"); |
| #else |
| #ifdef WSAEHOSTUNREACH |
| inscode(d, ds, de, "EHOSTUNREACH", WSAEHOSTUNREACH, "No route to host"); |
| #endif |
| #endif |
| #ifdef ENOMSG |
| inscode(d, ds, de, "ENOMSG", ENOMSG, "No message of desired type"); |
| #endif |
| #ifdef EUCLEAN |
| inscode(d, ds, de, "EUCLEAN", EUCLEAN, "Structure needs cleaning"); |
| #endif |
| #ifdef EL2NSYNC |
| inscode(d, ds, de, "EL2NSYNC", EL2NSYNC, "Level 2 not synchronized"); |
| #endif |
| #ifdef EL2HLT |
| inscode(d, ds, de, "EL2HLT", EL2HLT, "Level 2 halted"); |
| #endif |
| #ifdef ENODATA |
| inscode(d, ds, de, "ENODATA", ENODATA, "No data available"); |
| #endif |
| #ifdef ENOTBLK |
| inscode(d, ds, de, "ENOTBLK", ENOTBLK, "Block device required"); |
| #endif |
| #ifdef ENOSYS |
| inscode(d, ds, de, "ENOSYS", ENOSYS, "Function not implemented"); |
| #endif |
| #ifdef EPIPE |
| inscode(d, ds, de, "EPIPE", EPIPE, "Broken pipe"); |
| #endif |
| #ifdef EINVAL |
| inscode(d, ds, de, "EINVAL", EINVAL, "Invalid argument"); |
| #else |
| #ifdef WSAEINVAL |
| inscode(d, ds, de, "EINVAL", WSAEINVAL, "Invalid argument"); |
| #endif |
| #endif |
| #ifdef EOVERFLOW |
| inscode(d, ds, de, "EOVERFLOW", EOVERFLOW, "Value too large for defined data type"); |
| #endif |
| #ifdef EADV |
| inscode(d, ds, de, "EADV", EADV, "Advertise error"); |
| #endif |
| #ifdef EINTR |
| inscode(d, ds, de, "EINTR", EINTR, "Interrupted system call"); |
| #else |
| #ifdef WSAEINTR |
| inscode(d, ds, de, "EINTR", WSAEINTR, "Interrupted system call"); |
| #endif |
| #endif |
| #ifdef EUSERS |
| inscode(d, ds, de, "EUSERS", EUSERS, "Too many users"); |
| #else |
| #ifdef WSAEUSERS |
| inscode(d, ds, de, "EUSERS", WSAEUSERS, "Too many users"); |
| #endif |
| #endif |
| #ifdef ENOTEMPTY |
| inscode(d, ds, de, "ENOTEMPTY", ENOTEMPTY, "Directory not empty"); |
| #else |
| #ifdef WSAENOTEMPTY |
| inscode(d, ds, de, "ENOTEMPTY", WSAENOTEMPTY, "Directory not empty"); |
| #endif |
| #endif |
| #ifdef ENOBUFS |
| inscode(d, ds, de, "ENOBUFS", ENOBUFS, "No buffer space available"); |
| #else |
| #ifdef WSAENOBUFS |
| inscode(d, ds, de, "ENOBUFS", WSAENOBUFS, "No buffer space available"); |
| #endif |
| #endif |
| #ifdef EPROTO |
| inscode(d, ds, de, "EPROTO", EPROTO, "Protocol error"); |
| #endif |
| #ifdef EREMOTE |
| inscode(d, ds, de, "EREMOTE", EREMOTE, "Object is remote"); |
| #else |
| #ifdef WSAEREMOTE |
| inscode(d, ds, de, "EREMOTE", WSAEREMOTE, "Object is remote"); |
| #endif |
| #endif |
| #ifdef ENAVAIL |
| inscode(d, ds, de, "ENAVAIL", ENAVAIL, "No XENIX semaphores available"); |
| #endif |
| #ifdef ECHILD |
| inscode(d, ds, de, "ECHILD", ECHILD, "No child processes"); |
| #endif |
| #ifdef ELOOP |
| inscode(d, ds, de, "ELOOP", ELOOP, "Too many symbolic links encountered"); |
| #else |
| #ifdef WSAELOOP |
| inscode(d, ds, de, "ELOOP", WSAELOOP, "Too many symbolic links encountered"); |
| #endif |
| #endif |
| #ifdef EXDEV |
| inscode(d, ds, de, "EXDEV", EXDEV, "Cross-device link"); |
| #endif |
| #ifdef E2BIG |
| inscode(d, ds, de, "E2BIG", E2BIG, "Arg list too long"); |
| #endif |
| #ifdef ESRCH |
| inscode(d, ds, de, "ESRCH", ESRCH, "No such process"); |
| #endif |
| #ifdef EMSGSIZE |
| inscode(d, ds, de, "EMSGSIZE", EMSGSIZE, "Message too long"); |
| #else |
| #ifdef WSAEMSGSIZE |
| inscode(d, ds, de, "EMSGSIZE", WSAEMSGSIZE, "Message too long"); |
| #endif |
| #endif |
| #ifdef EAFNOSUPPORT |
| inscode(d, ds, de, "EAFNOSUPPORT", EAFNOSUPPORT, "Address family not supported by protocol"); |
| #else |
| #ifdef WSAEAFNOSUPPORT |
| inscode(d, ds, de, "EAFNOSUPPORT", WSAEAFNOSUPPORT, "Address family not supported by protocol"); |
| #endif |
| #endif |
| #ifdef EBADR |
| inscode(d, ds, de, "EBADR", EBADR, "Invalid request descriptor"); |
| #endif |
| #ifdef EHOSTDOWN |
| inscode(d, ds, de, "EHOSTDOWN", EHOSTDOWN, "Host is down"); |
| #else |
| #ifdef WSAEHOSTDOWN |
| inscode(d, ds, de, "EHOSTDOWN", WSAEHOSTDOWN, "Host is down"); |
| #endif |
| #endif |
| #ifdef EPFNOSUPPORT |
| inscode(d, ds, de, "EPFNOSUPPORT", EPFNOSUPPORT, "Protocol family not supported"); |
| #else |
| #ifdef WSAEPFNOSUPPORT |
| inscode(d, ds, de, "EPFNOSUPPORT", WSAEPFNOSUPPORT, "Protocol family not supported"); |
| #endif |
| #endif |
| #ifdef ENOPROTOOPT |
| inscode(d, ds, de, "ENOPROTOOPT", ENOPROTOOPT, "Protocol not available"); |
| #else |
| #ifdef WSAENOPROTOOPT |
| inscode(d, ds, de, "ENOPROTOOPT", WSAENOPROTOOPT, "Protocol not available"); |
| #endif |
| #endif |
| #ifdef EBUSY |
| inscode(d, ds, de, "EBUSY", EBUSY, "Device or resource busy"); |
| #endif |
| #ifdef EWOULDBLOCK |
| inscode(d, ds, de, "EWOULDBLOCK", EWOULDBLOCK, "Operation would block"); |
| #else |
| #ifdef WSAEWOULDBLOCK |
| inscode(d, ds, de, "EWOULDBLOCK", WSAEWOULDBLOCK, "Operation would block"); |
| #endif |
| #endif |
| #ifdef EBADFD |
| inscode(d, ds, de, "EBADFD", EBADFD, "File descriptor in bad state"); |
| #endif |
| #ifdef EDOTDOT |
| inscode(d, ds, de, "EDOTDOT", EDOTDOT, "RFS specific error"); |
| #endif |
| #ifdef EISCONN |
| inscode(d, ds, de, "EISCONN", EISCONN, "Transport endpoint is already connected"); |
| #else |
| #ifdef WSAEISCONN |
| inscode(d, ds, de, "EISCONN", WSAEISCONN, "Transport endpoint is already connected"); |
| #endif |
| #endif |
| #ifdef ENOANO |
| inscode(d, ds, de, "ENOANO", ENOANO, "No anode"); |
| #endif |
| #ifdef ESHUTDOWN |
| inscode(d, ds, de, "ESHUTDOWN", ESHUTDOWN, "Cannot send after transport endpoint shutdown"); |
| #else |
| #ifdef WSAESHUTDOWN |
| inscode(d, ds, de, "ESHUTDOWN", WSAESHUTDOWN, "Cannot send after transport endpoint shutdown"); |
| #endif |
| #endif |
| #ifdef ECHRNG |
| inscode(d, ds, de, "ECHRNG", ECHRNG, "Channel number out of range"); |
| #endif |
| #ifdef ELIBBAD |
| inscode(d, ds, de, "ELIBBAD", ELIBBAD, "Accessing a corrupted shared library"); |
| #endif |
| #ifdef ENONET |
| inscode(d, ds, de, "ENONET", ENONET, "Machine is not on the network"); |
| #endif |
| #ifdef EBADE |
| inscode(d, ds, de, "EBADE", EBADE, "Invalid exchange"); |
| #endif |
| #ifdef EBADF |
| inscode(d, ds, de, "EBADF", EBADF, "Bad file number"); |
| #else |
| #ifdef WSAEBADF |
| inscode(d, ds, de, "EBADF", WSAEBADF, "Bad file number"); |
| #endif |
| #endif |
| #ifdef EMULTIHOP |
| inscode(d, ds, de, "EMULTIHOP", EMULTIHOP, "Multihop attempted"); |
| #endif |
| #ifdef EIO |
| inscode(d, ds, de, "EIO", EIO, "I/O error"); |
| #endif |
| #ifdef EUNATCH |
| inscode(d, ds, de, "EUNATCH", EUNATCH, "Protocol driver not attached"); |
| #endif |
| #ifdef EPROTOTYPE |
| inscode(d, ds, de, "EPROTOTYPE", EPROTOTYPE, "Protocol wrong type for socket"); |
| #else |
| #ifdef WSAEPROTOTYPE |
| inscode(d, ds, de, "EPROTOTYPE", WSAEPROTOTYPE, "Protocol wrong type for socket"); |
| #endif |
| #endif |
| #ifdef ENOSPC |
| inscode(d, ds, de, "ENOSPC", ENOSPC, "No space left on device"); |
| #endif |
| #ifdef ENOEXEC |
| inscode(d, ds, de, "ENOEXEC", ENOEXEC, "Exec format error"); |
| #endif |
| #ifdef EALREADY |
| inscode(d, ds, de, "EALREADY", EALREADY, "Operation already in progress"); |
| #else |
| #ifdef WSAEALREADY |
| inscode(d, ds, de, "EALREADY", WSAEALREADY, "Operation already in progress"); |
| #endif |
| #endif |
| #ifdef ENETDOWN |
| inscode(d, ds, de, "ENETDOWN", ENETDOWN, "Network is down"); |
| #else |
| #ifdef WSAENETDOWN |
| inscode(d, ds, de, "ENETDOWN", WSAENETDOWN, "Network is down"); |
| #endif |
| #endif |
| #ifdef ENOTNAM |
| inscode(d, ds, de, "ENOTNAM", ENOTNAM, "Not a XENIX named type file"); |
| #endif |
| #ifdef EACCES |
| inscode(d, ds, de, "EACCES", EACCES, "Permission denied"); |
| #else |
| #ifdef WSAEACCES |
| inscode(d, ds, de, "EACCES", WSAEACCES, "Permission denied"); |
| #endif |
| #endif |
| #ifdef ELNRNG |
| inscode(d, ds, de, "ELNRNG", ELNRNG, "Link number out of range"); |
| #endif |
| #ifdef EILSEQ |
| inscode(d, ds, de, "EILSEQ", EILSEQ, "Illegal byte sequence"); |
| #endif |
| #ifdef ENOTDIR |
| inscode(d, ds, de, "ENOTDIR", ENOTDIR, "Not a directory"); |
| #endif |
| #ifdef ENOTUNIQ |
| inscode(d, ds, de, "ENOTUNIQ", ENOTUNIQ, "Name not unique on network"); |
| #endif |
| #ifdef EPERM |
| inscode(d, ds, de, "EPERM", EPERM, "Operation not permitted"); |
| #endif |
| #ifdef EDOM |
| inscode(d, ds, de, "EDOM", EDOM, "Math argument out of domain of func"); |
| #endif |
| #ifdef EXFULL |
| inscode(d, ds, de, "EXFULL", EXFULL, "Exchange full"); |
| #endif |
| #ifdef ECONNREFUSED |
| inscode(d, ds, de, "ECONNREFUSED", ECONNREFUSED, "Connection refused"); |
| #else |
| #ifdef WSAECONNREFUSED |
| inscode(d, ds, de, "ECONNREFUSED", WSAECONNREFUSED, "Connection refused"); |
| #endif |
| #endif |
| #ifdef EISDIR |
| inscode(d, ds, de, "EISDIR", EISDIR, "Is a directory"); |
| #endif |
| #ifdef EPROTONOSUPPORT |
| inscode(d, ds, de, "EPROTONOSUPPORT", EPROTONOSUPPORT, "Protocol not supported"); |
| #else |
| #ifdef WSAEPROTONOSUPPORT |
| inscode(d, ds, de, "EPROTONOSUPPORT", WSAEPROTONOSUPPORT, "Protocol not supported"); |
| #endif |
| #endif |
| #ifdef EROFS |
| inscode(d, ds, de, "EROFS", EROFS, "Read-only file system"); |
| #endif |
| #ifdef EADDRNOTAVAIL |
| inscode(d, ds, de, "EADDRNOTAVAIL", EADDRNOTAVAIL, "Cannot assign requested address"); |
| #else |
| #ifdef WSAEADDRNOTAVAIL |
| inscode(d, ds, de, "EADDRNOTAVAIL", WSAEADDRNOTAVAIL, "Cannot assign requested address"); |
| #endif |
| #endif |
| #ifdef EIDRM |
| inscode(d, ds, de, "EIDRM", EIDRM, "Identifier removed"); |
| #endif |
| #ifdef ECOMM |
| inscode(d, ds, de, "ECOMM", ECOMM, "Communication error on send"); |
| #endif |
| #ifdef ESRMNT |
| inscode(d, ds, de, "ESRMNT", ESRMNT, "Srmount error"); |
| #endif |
| #ifdef EREMOTEIO |
| inscode(d, ds, de, "EREMOTEIO", EREMOTEIO, "Remote I/O error"); |
| #endif |
| #ifdef EL3RST |
| inscode(d, ds, de, "EL3RST", EL3RST, "Level 3 reset"); |
| #endif |
| #ifdef EBADMSG |
| inscode(d, ds, de, "EBADMSG", EBADMSG, "Not a data message"); |
| #endif |
| #ifdef ENFILE |
| inscode(d, ds, de, "ENFILE", ENFILE, "File table overflow"); |
| #endif |
| #ifdef ELIBMAX |
| inscode(d, ds, de, "ELIBMAX", ELIBMAX, "Attempting to link in too many shared libraries"); |
| #endif |
| #ifdef ESPIPE |
| inscode(d, ds, de, "ESPIPE", ESPIPE, "Illegal seek"); |
| #endif |
| #ifdef ENOLINK |
| inscode(d, ds, de, "ENOLINK", ENOLINK, "Link has been severed"); |
| #endif |
| #ifdef ENETRESET |
| inscode(d, ds, de, "ENETRESET", ENETRESET, "Network dropped connection because of reset"); |
| #else |
| #ifdef WSAENETRESET |
| inscode(d, ds, de, "ENETRESET", WSAENETRESET, "Network dropped connection because of reset"); |
| #endif |
| #endif |
| #ifdef ETIMEDOUT |
| inscode(d, ds, de, "ETIMEDOUT", ETIMEDOUT, "Connection timed out"); |
| #else |
| #ifdef WSAETIMEDOUT |
| inscode(d, ds, de, "ETIMEDOUT", WSAETIMEDOUT, "Connection timed out"); |
| #endif |
| #endif |
| #ifdef ENOENT |
| inscode(d, ds, de, "ENOENT", ENOENT, "No such file or directory"); |
| #endif |
| #ifdef EEXIST |
| inscode(d, ds, de, "EEXIST", EEXIST, "File exists"); |
| #endif |
| #ifdef EDQUOT |
| inscode(d, ds, de, "EDQUOT", EDQUOT, "Quota exceeded"); |
| #else |
| #ifdef WSAEDQUOT |
| inscode(d, ds, de, "EDQUOT", WSAEDQUOT, "Quota exceeded"); |
| #endif |
| #endif |
| #ifdef ENOSTR |
| inscode(d, ds, de, "ENOSTR", ENOSTR, "Device not a stream"); |
| #endif |
| #ifdef EBADSLT |
| inscode(d, ds, de, "EBADSLT", EBADSLT, "Invalid slot"); |
| #endif |
| #ifdef EBADRQC |
| inscode(d, ds, de, "EBADRQC", EBADRQC, "Invalid request code"); |
| #endif |
| #ifdef ELIBACC |
| inscode(d, ds, de, "ELIBACC", ELIBACC, "Can not access a needed shared library"); |
| #endif |
| #ifdef EFAULT |
| inscode(d, ds, de, "EFAULT", EFAULT, "Bad address"); |
| #else |
| #ifdef WSAEFAULT |
| inscode(d, ds, de, "EFAULT", WSAEFAULT, "Bad address"); |
| #endif |
| #endif |
| #ifdef EFBIG |
| inscode(d, ds, de, "EFBIG", EFBIG, "File too large"); |
| #endif |
| #ifdef EDEADLK |
| inscode(d, ds, de, "EDEADLK", EDEADLK, "Resource deadlock would occur"); |
| #endif |
| #ifdef ENOTCONN |
| inscode(d, ds, de, "ENOTCONN", ENOTCONN, "Transport endpoint is not connected"); |
| #else |
| #ifdef WSAENOTCONN |
| inscode(d, ds, de, "ENOTCONN", WSAENOTCONN, "Transport endpoint is not connected"); |
| #endif |
| #endif |
| #ifdef EDESTADDRREQ |
| inscode(d, ds, de, "EDESTADDRREQ", EDESTADDRREQ, "Destination address required"); |
| #else |
| #ifdef WSAEDESTADDRREQ |
| inscode(d, ds, de, "EDESTADDRREQ", WSAEDESTADDRREQ, "Destination address required"); |
| #endif |
| #endif |
| #ifdef ELIBSCN |
| inscode(d, ds, de, "ELIBSCN", ELIBSCN, ".lib section in a.out corrupted"); |
| #endif |
| #ifdef ENOLCK |
| inscode(d, ds, de, "ENOLCK", ENOLCK, "No record locks available"); |
| #endif |
| #ifdef EISNAM |
| inscode(d, ds, de, "EISNAM", EISNAM, "Is a named type file"); |
| #endif |
| #ifdef ECONNABORTED |
| inscode(d, ds, de, "ECONNABORTED", ECONNABORTED, "Software caused connection abort"); |
| #else |
| #ifdef WSAECONNABORTED |
| inscode(d, ds, de, "ECONNABORTED", WSAECONNABORTED, "Software caused connection abort"); |
| #endif |
| #endif |
| #ifdef ENETUNREACH |
| inscode(d, ds, de, "ENETUNREACH", ENETUNREACH, "Network is unreachable"); |
| #else |
| #ifdef WSAENETUNREACH |
| inscode(d, ds, de, "ENETUNREACH", WSAENETUNREACH, "Network is unreachable"); |
| #endif |
| #endif |
| #ifdef ESTALE |
| inscode(d, ds, de, "ESTALE", ESTALE, "Stale NFS file handle"); |
| #else |
| #ifdef WSAESTALE |
| inscode(d, ds, de, "ESTALE", WSAESTALE, "Stale NFS file handle"); |
| #endif |
| #endif |
| #ifdef ENOSR |
| inscode(d, ds, de, "ENOSR", ENOSR, "Out of streams resources"); |
| #endif |
| #ifdef ENOMEM |
| inscode(d, ds, de, "ENOMEM", ENOMEM, "Out of memory"); |
| #endif |
| #ifdef ENOTSOCK |
| inscode(d, ds, de, "ENOTSOCK", ENOTSOCK, "Socket operation on non-socket"); |
| #else |
| #ifdef WSAENOTSOCK |
| inscode(d, ds, de, "ENOTSOCK", WSAENOTSOCK, "Socket operation on non-socket"); |
| #endif |
| #endif |
| #ifdef ESTRPIPE |
| inscode(d, ds, de, "ESTRPIPE", ESTRPIPE, "Streams pipe error"); |
| #endif |
| #ifdef EMLINK |
| inscode(d, ds, de, "EMLINK", EMLINK, "Too many links"); |
| #endif |
| #ifdef ERANGE |
| inscode(d, ds, de, "ERANGE", ERANGE, "Math result not representable"); |
| #endif |
| #ifdef ELIBEXEC |
| inscode(d, ds, de, "ELIBEXEC", ELIBEXEC, "Cannot exec a shared library directly"); |
| #endif |
| #ifdef EL3HLT |
| inscode(d, ds, de, "EL3HLT", EL3HLT, "Level 3 halted"); |
| #endif |
| #ifdef ECONNRESET |
| inscode(d, ds, de, "ECONNRESET", ECONNRESET, "Connection reset by peer"); |
| #else |
| #ifdef WSAECONNRESET |
| inscode(d, ds, de, "ECONNRESET", WSAECONNRESET, "Connection reset by peer"); |
| #endif |
| #endif |
| #ifdef EADDRINUSE |
| inscode(d, ds, de, "EADDRINUSE", EADDRINUSE, "Address already in use"); |
| #else |
| #ifdef WSAEADDRINUSE |
| inscode(d, ds, de, "EADDRINUSE", WSAEADDRINUSE, "Address already in use"); |
| #endif |
| #endif |
| #ifdef EOPNOTSUPP |
| inscode(d, ds, de, "EOPNOTSUPP", EOPNOTSUPP, "Operation not supported on transport endpoint"); |
| #else |
| #ifdef WSAEOPNOTSUPP |
| inscode(d, ds, de, "EOPNOTSUPP", WSAEOPNOTSUPP, "Operation not supported on transport endpoint"); |
| #endif |
| #endif |
| #ifdef EREMCHG |
| inscode(d, ds, de, "EREMCHG", EREMCHG, "Remote address changed"); |
| #endif |
| #ifdef EAGAIN |
| inscode(d, ds, de, "EAGAIN", EAGAIN, "Try again"); |
| #endif |
| #ifdef ENAMETOOLONG |
| inscode(d, ds, de, "ENAMETOOLONG", ENAMETOOLONG, "File name too long"); |
| #else |
| #ifdef WSAENAMETOOLONG |
| inscode(d, ds, de, "ENAMETOOLONG", WSAENAMETOOLONG, "File name too long"); |
| #endif |
| #endif |
| #ifdef ENOTTY |
| inscode(d, ds, de, "ENOTTY", ENOTTY, "Not a typewriter"); |
| #endif |
| #ifdef ERESTART |
| inscode(d, ds, de, "ERESTART", ERESTART, "Interrupted system call should be restarted"); |
| #endif |
| #ifdef ESOCKTNOSUPPORT |
| inscode(d, ds, de, "ESOCKTNOSUPPORT", ESOCKTNOSUPPORT, "Socket type not supported"); |
| #else |
| #ifdef WSAESOCKTNOSUPPORT |
| inscode(d, ds, de, "ESOCKTNOSUPPORT", WSAESOCKTNOSUPPORT, "Socket type not supported"); |
| #endif |
| #endif |
| #ifdef ETIME |
| inscode(d, ds, de, "ETIME", ETIME, "Timer expired"); |
| #endif |
| #ifdef EBFONT |
| inscode(d, ds, de, "EBFONT", EBFONT, "Bad font file format"); |
| #endif |
| #ifdef EDEADLOCK |
| inscode(d, ds, de, "EDEADLOCK", EDEADLOCK, "Error EDEADLOCK"); |
| #endif |
| #ifdef ETOOMANYREFS |
| inscode(d, ds, de, "ETOOMANYREFS", ETOOMANYREFS, "Too many references: cannot splice"); |
| #else |
| #ifdef WSAETOOMANYREFS |
| inscode(d, ds, de, "ETOOMANYREFS", WSAETOOMANYREFS, "Too many references: cannot splice"); |
| #endif |
| #endif |
| #ifdef EMFILE |
| inscode(d, ds, de, "EMFILE", EMFILE, "Too many open files"); |
| #else |
| #ifdef WSAEMFILE |
| inscode(d, ds, de, "EMFILE", WSAEMFILE, "Too many open files"); |
| #endif |
| #endif |
| #ifdef ETXTBSY |
| inscode(d, ds, de, "ETXTBSY", ETXTBSY, "Text file busy"); |
| #endif |
| #ifdef EINPROGRESS |
| inscode(d, ds, de, "EINPROGRESS", EINPROGRESS, "Operation now in progress"); |
| #else |
| #ifdef WSAEINPROGRESS |
| inscode(d, ds, de, "EINPROGRESS", WSAEINPROGRESS, "Operation now in progress"); |
| #endif |
| #endif |
| #ifdef ENXIO |
| inscode(d, ds, de, "ENXIO", ENXIO, "No such device or address"); |
| #endif |
| #ifdef ENOPKG |
| inscode(d, ds, de, "ENOPKG", ENOPKG, "Package not installed"); |
| #endif |
| #ifdef WSASY |
| inscode(d, ds, de, "WSASY", WSASY, "Error WSASY"); |
| #endif |
| #ifdef WSAEHOSTDOWN |
| inscode(d, ds, de, "WSAEHOSTDOWN", WSAEHOSTDOWN, "Host is down"); |
| #endif |
| #ifdef WSAENETDOWN |
| inscode(d, ds, de, "WSAENETDOWN", WSAENETDOWN, "Network is down"); |
| #endif |
| #ifdef WSAENOTSOCK |
| inscode(d, ds, de, "WSAENOTSOCK", WSAENOTSOCK, "Socket operation on non-socket"); |
| #endif |
| #ifdef WSAEHOSTUNREACH |
| inscode(d, ds, de, "WSAEHOSTUNREACH", WSAEHOSTUNREACH, "No route to host"); |
| #endif |
| #ifdef WSAELOOP |
| inscode(d, ds, de, "WSAELOOP", WSAELOOP, "Too many symbolic links encountered"); |
| #endif |
| #ifdef WSAEMFILE |
| inscode(d, ds, de, "WSAEMFILE", WSAEMFILE, "Too many open files"); |
| #endif |
| #ifdef WSAESTALE |
| inscode(d, ds, de, "WSAESTALE", WSAESTALE, "Stale NFS file handle"); |
| #endif |
| #ifdef WSAVERNOTSUPPORTED |
| inscode(d, ds, de, "WSAVERNOTSUPPORTED", WSAVERNOTSUPPORTED, "Error WSAVERNOTSUPPORTED"); |
| #endif |
| #ifdef WSAENETUNREACH |
| inscode(d, ds, de, "WSAENETUNREACH", WSAENETUNREACH, "Network is unreachable"); |
| #endif |
| #ifdef WSAEPROCLIM |
| inscode(d, ds, de, "WSAEPROCLIM", WSAEPROCLIM, "Error WSAEPROCLIM"); |
| #endif |
| #ifdef WSAEFAULT |
| inscode(d, ds, de, "WSAEFAULT", WSAEFAULT, "Bad address"); |
| #endif |
| #ifdef WSANOTINITIALISED |
| inscode(d, ds, de, "WSANOTINITIALISED", WSANOTINITIALISED, "Error WSANOTINITIALISED"); |
| #endif |
| #ifdef WSAEUSERS |
| inscode(d, ds, de, "WSAEUSERS", WSAEUSERS, "Too many users"); |
| #endif |
| #ifdef WSAMAKEASYNCREPL |
| inscode(d, ds, de, "WSAMAKEASYNCREPL", WSAMAKEASYNCREPL, "Error WSAMAKEASYNCREPL"); |
| #endif |
| #ifdef WSAENOPROTOOPT |
| inscode(d, ds, de, "WSAENOPROTOOPT", WSAENOPROTOOPT, "Protocol not available"); |
| #endif |
| #ifdef WSAECONNABORTED |
| inscode(d, ds, de, "WSAECONNABORTED", WSAECONNABORTED, "Software caused connection abort"); |
| #endif |
| #ifdef WSAENAMETOOLONG |
| inscode(d, ds, de, "WSAENAMETOOLONG", WSAENAMETOOLONG, "File name too long"); |
| #endif |
| #ifdef WSAENOTEMPTY |
| inscode(d, ds, de, "WSAENOTEMPTY", WSAENOTEMPTY, "Directory not empty"); |
| #endif |
| #ifdef WSAESHUTDOWN |
| inscode(d, ds, de, "WSAESHUTDOWN", WSAESHUTDOWN, "Cannot send after transport endpoint shutdown"); |
| #endif |
| #ifdef WSAEAFNOSUPPORT |
| inscode(d, ds, de, "WSAEAFNOSUPPORT", WSAEAFNOSUPPORT, "Address family not supported by protocol"); |
| #endif |
| #ifdef WSAETOOMANYREFS |
| inscode(d, ds, de, "WSAETOOMANYREFS", WSAETOOMANYREFS, "Too many references: cannot splice"); |
| #endif |
| #ifdef WSAEACCES |
| inscode(d, ds, de, "WSAEACCES", WSAEACCES, "Permission denied"); |
| #endif |
| #ifdef WSATR |
| inscode(d, ds, de, "WSATR", WSATR, "Error WSATR"); |
| #endif |
| #ifdef WSABASEERR |
| inscode(d, ds, de, "WSABASEERR", WSABASEERR, "Error WSABASEERR"); |
| #endif |
| #ifdef WSADESCRIPTIO |
| inscode(d, ds, de, "WSADESCRIPTIO", WSADESCRIPTIO, "Error WSADESCRIPTIO"); |
| #endif |
| #ifdef WSAEMSGSIZE |
| inscode(d, ds, de, "WSAEMSGSIZE", WSAEMSGSIZE, "Message too long"); |
| #endif |
| #ifdef WSAEBADF |
| inscode(d, ds, de, "WSAEBADF", WSAEBADF, "Bad file number"); |
| #endif |
| #ifdef WSAECONNRESET |
| inscode(d, ds, de, "WSAECONNRESET", WSAECONNRESET, "Connection reset by peer"); |
| #endif |
| #ifdef WSAGETSELECTERRO |
| inscode(d, ds, de, "WSAGETSELECTERRO", WSAGETSELECTERRO, "Error WSAGETSELECTERRO"); |
| #endif |
| #ifdef WSAETIMEDOUT |
| inscode(d, ds, de, "WSAETIMEDOUT", WSAETIMEDOUT, "Connection timed out"); |
| #endif |
| #ifdef WSAENOBUFS |
| inscode(d, ds, de, "WSAENOBUFS", WSAENOBUFS, "No buffer space available"); |
| #endif |
| #ifdef WSAEDISCON |
| inscode(d, ds, de, "WSAEDISCON", WSAEDISCON, "Error WSAEDISCON"); |
| #endif |
| #ifdef WSAEINTR |
| inscode(d, ds, de, "WSAEINTR", WSAEINTR, "Interrupted system call"); |
| #endif |
| #ifdef WSAEPROTOTYPE |
| inscode(d, ds, de, "WSAEPROTOTYPE", WSAEPROTOTYPE, "Protocol wrong type for socket"); |
| #endif |
| #ifdef WSAHOS |
| inscode(d, ds, de, "WSAHOS", WSAHOS, "Error WSAHOS"); |
| #endif |
| #ifdef WSAEADDRINUSE |
| inscode(d, ds, de, "WSAEADDRINUSE", WSAEADDRINUSE, "Address already in use"); |
| #endif |
| #ifdef WSAEADDRNOTAVAIL |
| inscode(d, ds, de, "WSAEADDRNOTAVAIL", WSAEADDRNOTAVAIL, "Cannot assign requested address"); |
| #endif |
| #ifdef WSAEALREADY |
| inscode(d, ds, de, "WSAEALREADY", WSAEALREADY, "Operation already in progress"); |
| #endif |
| #ifdef WSAEPROTONOSUPPORT |
| inscode(d, ds, de, "WSAEPROTONOSUPPORT", WSAEPROTONOSUPPORT, "Protocol not supported"); |
| #endif |
| #ifdef WSASYSNOTREADY |
| inscode(d, ds, de, "WSASYSNOTREADY", WSASYSNOTREADY, "Error WSASYSNOTREADY"); |
| #endif |
| #ifdef WSAEWOULDBLOCK |
| inscode(d, ds, de, "WSAEWOULDBLOCK", WSAEWOULDBLOCK, "Operation would block"); |
| #endif |
| #ifdef WSAEPFNOSUPPORT |
| inscode(d, ds, de, "WSAEPFNOSUPPORT", WSAEPFNOSUPPORT, "Protocol family not supported"); |
| #endif |
| #ifdef WSAEOPNOTSUPP |
| inscode(d, ds, de, "WSAEOPNOTSUPP", WSAEOPNOTSUPP, "Operation not supported on transport endpoint"); |
| #endif |
| #ifdef WSAEISCONN |
| inscode(d, ds, de, "WSAEISCONN", WSAEISCONN, "Transport endpoint is already connected"); |
| #endif |
| #ifdef WSAEDQUOT |
| inscode(d, ds, de, "WSAEDQUOT", WSAEDQUOT, "Quota exceeded"); |
| #endif |
| #ifdef WSAENOTCONN |
| inscode(d, ds, de, "WSAENOTCONN", WSAENOTCONN, "Transport endpoint is not connected"); |
| #endif |
| #ifdef WSAEREMOTE |
| inscode(d, ds, de, "WSAEREMOTE", WSAEREMOTE, "Object is remote"); |
| #endif |
| #ifdef WSAEINVAL |
| inscode(d, ds, de, "WSAEINVAL", WSAEINVAL, "Invalid argument"); |
| #endif |
| #ifdef WSAEINPROGRESS |
| inscode(d, ds, de, "WSAEINPROGRESS", WSAEINPROGRESS, "Operation now in progress"); |
| #endif |
| #ifdef WSAGETSELECTEVEN |
| inscode(d, ds, de, "WSAGETSELECTEVEN", WSAGETSELECTEVEN, "Error WSAGETSELECTEVEN"); |
| #endif |
| #ifdef WSAESOCKTNOSUPPORT |
| inscode(d, ds, de, "WSAESOCKTNOSUPPORT", WSAESOCKTNOSUPPORT, "Socket type not supported"); |
| #endif |
| #ifdef WSAGETASYNCERRO |
| inscode(d, ds, de, "WSAGETASYNCERRO", WSAGETASYNCERRO, "Error WSAGETASYNCERRO"); |
| #endif |
| #ifdef WSAMAKESELECTREPL |
| inscode(d, ds, de, "WSAMAKESELECTREPL", WSAMAKESELECTREPL, "Error WSAMAKESELECTREPL"); |
| #endif |
| #ifdef WSAGETASYNCBUFLE |
| inscode(d, ds, de, "WSAGETASYNCBUFLE", WSAGETASYNCBUFLE, "Error WSAGETASYNCBUFLE"); |
| #endif |
| #ifdef WSAEDESTADDRREQ |
| inscode(d, ds, de, "WSAEDESTADDRREQ", WSAEDESTADDRREQ, "Destination address required"); |
| #endif |
| #ifdef WSAECONNREFUSED |
| inscode(d, ds, de, "WSAECONNREFUSED", WSAECONNREFUSED, "Connection refused"); |
| #endif |
| #ifdef WSAENETRESET |
| inscode(d, ds, de, "WSAENETRESET", WSAENETRESET, "Network dropped connection because of reset"); |
| #endif |
| #ifdef WSAN |
| inscode(d, ds, de, "WSAN", WSAN, "Error WSAN"); |
| #endif |
| |
| Py_DECREF(de); |
| } |